linux/drivers/gpu/drm/drm_dp_mst_topology.c

3125 lines
84 KiB
C
Raw Normal View History

drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
/*
* Copyright © 2014 Red Hat
*
* Permission to use, copy, modify, distribute, and sell this software and its
* documentation for any purpose is hereby granted without fee, provided that
* the above copyright notice appear in all copies and that both that copyright
* notice and this permission notice appear in supporting documentation, and
* that the name of the copyright holders not be used in advertising or
* publicity pertaining to distribution of the software without specific,
* written prior permission. The copyright holders make no representations
* about the suitability of this software for any purpose. It is provided "as
* is" without express or implied warranty.
*
* THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
* INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
* EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
* CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
* DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
* TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
* OF THIS SOFTWARE.
*/
#include <linux/kernel.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/sched.h>
#include <linux/seq_file.h>
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
#include <linux/i2c.h>
#include <drm/drm_dp_mst_helper.h>
#include <drm/drmP.h>
#include <drm/drm_fixed.h>
/**
* DOC: dp mst helper
*
* These functions contain parts of the DisplayPort 1.2a MultiStream Transport
* protocol. The helpers contain a topology manager and bandwidth manager.
* The helpers encapsulate the sending and received of sideband msgs.
*/
static bool dump_dp_payload_table(struct drm_dp_mst_topology_mgr *mgr,
char *buf);
static int test_calc_pbn_mode(void);
static void drm_dp_put_port(struct drm_dp_mst_port *port);
static int drm_dp_dpcd_write_payload(struct drm_dp_mst_topology_mgr *mgr,
int id,
struct drm_dp_payload *payload);
static int drm_dp_send_dpcd_write(struct drm_dp_mst_topology_mgr *mgr,
struct drm_dp_mst_port *port,
int offset, int size, u8 *bytes);
static void drm_dp_send_link_address(struct drm_dp_mst_topology_mgr *mgr,
struct drm_dp_mst_branch *mstb);
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
static int drm_dp_send_enum_path_resources(struct drm_dp_mst_topology_mgr *mgr,
struct drm_dp_mst_branch *mstb,
struct drm_dp_mst_port *port);
static bool drm_dp_validate_guid(struct drm_dp_mst_topology_mgr *mgr,
u8 *guid);
static int drm_dp_mst_register_i2c_bus(struct drm_dp_aux *aux);
static void drm_dp_mst_unregister_i2c_bus(struct drm_dp_aux *aux);
static void drm_dp_mst_kick_tx(struct drm_dp_mst_topology_mgr *mgr);
/* sideband msg handling */
static u8 drm_dp_msg_header_crc4(const uint8_t *data, size_t num_nibbles)
{
u8 bitmask = 0x80;
u8 bitshift = 7;
u8 array_index = 0;
int number_of_bits = num_nibbles * 4;
u8 remainder = 0;
while (number_of_bits != 0) {
number_of_bits--;
remainder <<= 1;
remainder |= (data[array_index] & bitmask) >> bitshift;
bitmask >>= 1;
bitshift--;
if (bitmask == 0) {
bitmask = 0x80;
bitshift = 7;
array_index++;
}
if ((remainder & 0x10) == 0x10)
remainder ^= 0x13;
}
number_of_bits = 4;
while (number_of_bits != 0) {
number_of_bits--;
remainder <<= 1;
if ((remainder & 0x10) != 0)
remainder ^= 0x13;
}
return remainder;
}
static u8 drm_dp_msg_data_crc4(const uint8_t *data, u8 number_of_bytes)
{
u8 bitmask = 0x80;
u8 bitshift = 7;
u8 array_index = 0;
int number_of_bits = number_of_bytes * 8;
u16 remainder = 0;
while (number_of_bits != 0) {
number_of_bits--;
remainder <<= 1;
remainder |= (data[array_index] & bitmask) >> bitshift;
bitmask >>= 1;
bitshift--;
if (bitmask == 0) {
bitmask = 0x80;
bitshift = 7;
array_index++;
}
if ((remainder & 0x100) == 0x100)
remainder ^= 0xd5;
}
number_of_bits = 8;
while (number_of_bits != 0) {
number_of_bits--;
remainder <<= 1;
if ((remainder & 0x100) != 0)
remainder ^= 0xd5;
}
return remainder & 0xff;
}
static inline u8 drm_dp_calc_sb_hdr_size(struct drm_dp_sideband_msg_hdr *hdr)
{
u8 size = 3;
size += (hdr->lct / 2);
return size;
}
static void drm_dp_encode_sideband_msg_hdr(struct drm_dp_sideband_msg_hdr *hdr,
u8 *buf, int *len)
{
int idx = 0;
int i;
u8 crc4;
buf[idx++] = ((hdr->lct & 0xf) << 4) | (hdr->lcr & 0xf);
for (i = 0; i < (hdr->lct / 2); i++)
buf[idx++] = hdr->rad[i];
buf[idx++] = (hdr->broadcast << 7) | (hdr->path_msg << 6) |
(hdr->msg_len & 0x3f);
buf[idx++] = (hdr->somt << 7) | (hdr->eomt << 6) | (hdr->seqno << 4);
crc4 = drm_dp_msg_header_crc4(buf, (idx * 2) - 1);
buf[idx - 1] |= (crc4 & 0xf);
*len = idx;
}
static bool drm_dp_decode_sideband_msg_hdr(struct drm_dp_sideband_msg_hdr *hdr,
u8 *buf, int buflen, u8 *hdrlen)
{
u8 crc4;
u8 len;
int i;
u8 idx;
if (buf[0] == 0)
return false;
len = 3;
len += ((buf[0] & 0xf0) >> 4) / 2;
if (len > buflen)
return false;
crc4 = drm_dp_msg_header_crc4(buf, (len * 2) - 1);
if ((crc4 & 0xf) != (buf[len - 1] & 0xf)) {
DRM_DEBUG_KMS("crc4 mismatch 0x%x 0x%x\n", crc4, buf[len - 1]);
return false;
}
hdr->lct = (buf[0] & 0xf0) >> 4;
hdr->lcr = (buf[0] & 0xf);
idx = 1;
for (i = 0; i < (hdr->lct / 2); i++)
hdr->rad[i] = buf[idx++];
hdr->broadcast = (buf[idx] >> 7) & 0x1;
hdr->path_msg = (buf[idx] >> 6) & 0x1;
hdr->msg_len = buf[idx] & 0x3f;
idx++;
hdr->somt = (buf[idx] >> 7) & 0x1;
hdr->eomt = (buf[idx] >> 6) & 0x1;
hdr->seqno = (buf[idx] >> 4) & 0x1;
idx++;
*hdrlen = idx;
return true;
}
static void drm_dp_encode_sideband_req(struct drm_dp_sideband_msg_req_body *req,
struct drm_dp_sideband_msg_tx *raw)
{
int idx = 0;
int i;
u8 *buf = raw->msg;
buf[idx++] = req->req_type & 0x7f;
switch (req->req_type) {
case DP_ENUM_PATH_RESOURCES:
buf[idx] = (req->u.port_num.port_number & 0xf) << 4;
idx++;
break;
case DP_ALLOCATE_PAYLOAD:
buf[idx] = (req->u.allocate_payload.port_number & 0xf) << 4 |
(req->u.allocate_payload.number_sdp_streams & 0xf);
idx++;
buf[idx] = (req->u.allocate_payload.vcpi & 0x7f);
idx++;
buf[idx] = (req->u.allocate_payload.pbn >> 8);
idx++;
buf[idx] = (req->u.allocate_payload.pbn & 0xff);
idx++;
for (i = 0; i < req->u.allocate_payload.number_sdp_streams / 2; i++) {
buf[idx] = ((req->u.allocate_payload.sdp_stream_sink[i * 2] & 0xf) << 4) |
(req->u.allocate_payload.sdp_stream_sink[i * 2 + 1] & 0xf);
idx++;
}
if (req->u.allocate_payload.number_sdp_streams & 1) {
i = req->u.allocate_payload.number_sdp_streams - 1;
buf[idx] = (req->u.allocate_payload.sdp_stream_sink[i] & 0xf) << 4;
idx++;
}
break;
case DP_QUERY_PAYLOAD:
buf[idx] = (req->u.query_payload.port_number & 0xf) << 4;
idx++;
buf[idx] = (req->u.query_payload.vcpi & 0x7f);
idx++;
break;
case DP_REMOTE_DPCD_READ:
buf[idx] = (req->u.dpcd_read.port_number & 0xf) << 4;
buf[idx] |= ((req->u.dpcd_read.dpcd_address & 0xf0000) >> 16) & 0xf;
idx++;
buf[idx] = (req->u.dpcd_read.dpcd_address & 0xff00) >> 8;
idx++;
buf[idx] = (req->u.dpcd_read.dpcd_address & 0xff);
idx++;
buf[idx] = (req->u.dpcd_read.num_bytes);
idx++;
break;
case DP_REMOTE_DPCD_WRITE:
buf[idx] = (req->u.dpcd_write.port_number & 0xf) << 4;
buf[idx] |= ((req->u.dpcd_write.dpcd_address & 0xf0000) >> 16) & 0xf;
idx++;
buf[idx] = (req->u.dpcd_write.dpcd_address & 0xff00) >> 8;
idx++;
buf[idx] = (req->u.dpcd_write.dpcd_address & 0xff);
idx++;
buf[idx] = (req->u.dpcd_write.num_bytes);
idx++;
memcpy(&buf[idx], req->u.dpcd_write.bytes, req->u.dpcd_write.num_bytes);
idx += req->u.dpcd_write.num_bytes;
break;
case DP_REMOTE_I2C_READ:
buf[idx] = (req->u.i2c_read.port_number & 0xf) << 4;
buf[idx] |= (req->u.i2c_read.num_transactions & 0x3);
idx++;
for (i = 0; i < (req->u.i2c_read.num_transactions & 0x3); i++) {
buf[idx] = req->u.i2c_read.transactions[i].i2c_dev_id & 0x7f;
idx++;
buf[idx] = req->u.i2c_read.transactions[i].num_bytes;
idx++;
memcpy(&buf[idx], req->u.i2c_read.transactions[i].bytes, req->u.i2c_read.transactions[i].num_bytes);
idx += req->u.i2c_read.transactions[i].num_bytes;
buf[idx] = (req->u.i2c_read.transactions[i].no_stop_bit & 0x1) << 5;
buf[idx] |= (req->u.i2c_read.transactions[i].i2c_transaction_delay & 0xf);
idx++;
}
buf[idx] = (req->u.i2c_read.read_i2c_device_id) & 0x7f;
idx++;
buf[idx] = (req->u.i2c_read.num_bytes_read);
idx++;
break;
case DP_REMOTE_I2C_WRITE:
buf[idx] = (req->u.i2c_write.port_number & 0xf) << 4;
idx++;
buf[idx] = (req->u.i2c_write.write_i2c_device_id) & 0x7f;
idx++;
buf[idx] = (req->u.i2c_write.num_bytes);
idx++;
memcpy(&buf[idx], req->u.i2c_write.bytes, req->u.i2c_write.num_bytes);
idx += req->u.i2c_write.num_bytes;
break;
}
raw->cur_len = idx;
}
static void drm_dp_crc_sideband_chunk_req(u8 *msg, u8 len)
{
u8 crc4;
crc4 = drm_dp_msg_data_crc4(msg, len);
msg[len] = crc4;
}
static void drm_dp_encode_sideband_reply(struct drm_dp_sideband_msg_reply_body *rep,
struct drm_dp_sideband_msg_tx *raw)
{
int idx = 0;
u8 *buf = raw->msg;
buf[idx++] = (rep->reply_type & 0x1) << 7 | (rep->req_type & 0x7f);
raw->cur_len = idx;
}
/* this adds a chunk of msg to the builder to get the final msg */
static bool drm_dp_sideband_msg_build(struct drm_dp_sideband_msg_rx *msg,
u8 *replybuf, u8 replybuflen, bool hdr)
{
int ret;
u8 crc4;
if (hdr) {
u8 hdrlen;
struct drm_dp_sideband_msg_hdr recv_hdr;
ret = drm_dp_decode_sideband_msg_hdr(&recv_hdr, replybuf, replybuflen, &hdrlen);
if (ret == false) {
print_hex_dump(KERN_DEBUG, "failed hdr", DUMP_PREFIX_NONE, 16, 1, replybuf, replybuflen, false);
return false;
}
/* get length contained in this portion */
msg->curchunk_len = recv_hdr.msg_len;
msg->curchunk_hdrlen = hdrlen;
/* we have already gotten an somt - don't bother parsing */
if (recv_hdr.somt && msg->have_somt)
return false;
if (recv_hdr.somt) {
memcpy(&msg->initial_hdr, &recv_hdr, sizeof(struct drm_dp_sideband_msg_hdr));
msg->have_somt = true;
}
if (recv_hdr.eomt)
msg->have_eomt = true;
/* copy the bytes for the remainder of this header chunk */
msg->curchunk_idx = min(msg->curchunk_len, (u8)(replybuflen - hdrlen));
memcpy(&msg->chunk[0], replybuf + hdrlen, msg->curchunk_idx);
} else {
memcpy(&msg->chunk[msg->curchunk_idx], replybuf, replybuflen);
msg->curchunk_idx += replybuflen;
}
if (msg->curchunk_idx >= msg->curchunk_len) {
/* do CRC */
crc4 = drm_dp_msg_data_crc4(msg->chunk, msg->curchunk_len - 1);
/* copy chunk into bigger msg */
memcpy(&msg->msg[msg->curlen], msg->chunk, msg->curchunk_len - 1);
msg->curlen += msg->curchunk_len - 1;
}
return true;
}
static bool drm_dp_sideband_parse_link_address(struct drm_dp_sideband_msg_rx *raw,
struct drm_dp_sideband_msg_reply_body *repmsg)
{
int idx = 1;
int i;
memcpy(repmsg->u.link_addr.guid, &raw->msg[idx], 16);
idx += 16;
repmsg->u.link_addr.nports = raw->msg[idx] & 0xf;
idx++;
if (idx > raw->curlen)
goto fail_len;
for (i = 0; i < repmsg->u.link_addr.nports; i++) {
if (raw->msg[idx] & 0x80)
repmsg->u.link_addr.ports[i].input_port = 1;
repmsg->u.link_addr.ports[i].peer_device_type = (raw->msg[idx] >> 4) & 0x7;
repmsg->u.link_addr.ports[i].port_number = (raw->msg[idx] & 0xf);
idx++;
if (idx > raw->curlen)
goto fail_len;
repmsg->u.link_addr.ports[i].mcs = (raw->msg[idx] >> 7) & 0x1;
repmsg->u.link_addr.ports[i].ddps = (raw->msg[idx] >> 6) & 0x1;
if (repmsg->u.link_addr.ports[i].input_port == 0)
repmsg->u.link_addr.ports[i].legacy_device_plug_status = (raw->msg[idx] >> 5) & 0x1;
idx++;
if (idx > raw->curlen)
goto fail_len;
if (repmsg->u.link_addr.ports[i].input_port == 0) {
repmsg->u.link_addr.ports[i].dpcd_revision = (raw->msg[idx]);
idx++;
if (idx > raw->curlen)
goto fail_len;
memcpy(repmsg->u.link_addr.ports[i].peer_guid, &raw->msg[idx], 16);
idx += 16;
if (idx > raw->curlen)
goto fail_len;
repmsg->u.link_addr.ports[i].num_sdp_streams = (raw->msg[idx] >> 4) & 0xf;
repmsg->u.link_addr.ports[i].num_sdp_stream_sinks = (raw->msg[idx] & 0xf);
idx++;
}
if (idx > raw->curlen)
goto fail_len;
}
return true;
fail_len:
DRM_DEBUG_KMS("link address reply parse length fail %d %d\n", idx, raw->curlen);
return false;
}
static bool drm_dp_sideband_parse_remote_dpcd_read(struct drm_dp_sideband_msg_rx *raw,
struct drm_dp_sideband_msg_reply_body *repmsg)
{
int idx = 1;
repmsg->u.remote_dpcd_read_ack.port_number = raw->msg[idx] & 0xf;
idx++;
if (idx > raw->curlen)
goto fail_len;
repmsg->u.remote_dpcd_read_ack.num_bytes = raw->msg[idx];
if (idx > raw->curlen)
goto fail_len;
memcpy(repmsg->u.remote_dpcd_read_ack.bytes, &raw->msg[idx], repmsg->u.remote_dpcd_read_ack.num_bytes);
return true;
fail_len:
DRM_DEBUG_KMS("link address reply parse length fail %d %d\n", idx, raw->curlen);
return false;
}
static bool drm_dp_sideband_parse_remote_dpcd_write(struct drm_dp_sideband_msg_rx *raw,
struct drm_dp_sideband_msg_reply_body *repmsg)
{
int idx = 1;
repmsg->u.remote_dpcd_write_ack.port_number = raw->msg[idx] & 0xf;
idx++;
if (idx > raw->curlen)
goto fail_len;
return true;
fail_len:
DRM_DEBUG_KMS("parse length fail %d %d\n", idx, raw->curlen);
return false;
}
static bool drm_dp_sideband_parse_remote_i2c_read_ack(struct drm_dp_sideband_msg_rx *raw,
struct drm_dp_sideband_msg_reply_body *repmsg)
{
int idx = 1;
repmsg->u.remote_i2c_read_ack.port_number = (raw->msg[idx] & 0xf);
idx++;
if (idx > raw->curlen)
goto fail_len;
repmsg->u.remote_i2c_read_ack.num_bytes = raw->msg[idx];
idx++;
/* TODO check */
memcpy(repmsg->u.remote_i2c_read_ack.bytes, &raw->msg[idx], repmsg->u.remote_i2c_read_ack.num_bytes);
return true;
fail_len:
DRM_DEBUG_KMS("remote i2c reply parse length fail %d %d\n", idx, raw->curlen);
return false;
}
static bool drm_dp_sideband_parse_enum_path_resources_ack(struct drm_dp_sideband_msg_rx *raw,
struct drm_dp_sideband_msg_reply_body *repmsg)
{
int idx = 1;
repmsg->u.path_resources.port_number = (raw->msg[idx] >> 4) & 0xf;
idx++;
if (idx > raw->curlen)
goto fail_len;
repmsg->u.path_resources.full_payload_bw_number = (raw->msg[idx] << 8) | (raw->msg[idx+1]);
idx += 2;
if (idx > raw->curlen)
goto fail_len;
repmsg->u.path_resources.avail_payload_bw_number = (raw->msg[idx] << 8) | (raw->msg[idx+1]);
idx += 2;
if (idx > raw->curlen)
goto fail_len;
return true;
fail_len:
DRM_DEBUG_KMS("enum resource parse length fail %d %d\n", idx, raw->curlen);
return false;
}
static bool drm_dp_sideband_parse_allocate_payload_ack(struct drm_dp_sideband_msg_rx *raw,
struct drm_dp_sideband_msg_reply_body *repmsg)
{
int idx = 1;
repmsg->u.allocate_payload.port_number = (raw->msg[idx] >> 4) & 0xf;
idx++;
if (idx > raw->curlen)
goto fail_len;
repmsg->u.allocate_payload.vcpi = raw->msg[idx];
idx++;
if (idx > raw->curlen)
goto fail_len;
repmsg->u.allocate_payload.allocated_pbn = (raw->msg[idx] << 8) | (raw->msg[idx+1]);
idx += 2;
if (idx > raw->curlen)
goto fail_len;
return true;
fail_len:
DRM_DEBUG_KMS("allocate payload parse length fail %d %d\n", idx, raw->curlen);
return false;
}
static bool drm_dp_sideband_parse_query_payload_ack(struct drm_dp_sideband_msg_rx *raw,
struct drm_dp_sideband_msg_reply_body *repmsg)
{
int idx = 1;
repmsg->u.query_payload.port_number = (raw->msg[idx] >> 4) & 0xf;
idx++;
if (idx > raw->curlen)
goto fail_len;
repmsg->u.query_payload.allocated_pbn = (raw->msg[idx] << 8) | (raw->msg[idx + 1]);
idx += 2;
if (idx > raw->curlen)
goto fail_len;
return true;
fail_len:
DRM_DEBUG_KMS("query payload parse length fail %d %d\n", idx, raw->curlen);
return false;
}
static bool drm_dp_sideband_parse_reply(struct drm_dp_sideband_msg_rx *raw,
struct drm_dp_sideband_msg_reply_body *msg)
{
memset(msg, 0, sizeof(*msg));
msg->reply_type = (raw->msg[0] & 0x80) >> 7;
msg->req_type = (raw->msg[0] & 0x7f);
if (msg->reply_type) {
memcpy(msg->u.nak.guid, &raw->msg[1], 16);
msg->u.nak.reason = raw->msg[17];
msg->u.nak.nak_data = raw->msg[18];
return false;
}
switch (msg->req_type) {
case DP_LINK_ADDRESS:
return drm_dp_sideband_parse_link_address(raw, msg);
case DP_QUERY_PAYLOAD:
return drm_dp_sideband_parse_query_payload_ack(raw, msg);
case DP_REMOTE_DPCD_READ:
return drm_dp_sideband_parse_remote_dpcd_read(raw, msg);
case DP_REMOTE_DPCD_WRITE:
return drm_dp_sideband_parse_remote_dpcd_write(raw, msg);
case DP_REMOTE_I2C_READ:
return drm_dp_sideband_parse_remote_i2c_read_ack(raw, msg);
case DP_ENUM_PATH_RESOURCES:
return drm_dp_sideband_parse_enum_path_resources_ack(raw, msg);
case DP_ALLOCATE_PAYLOAD:
return drm_dp_sideband_parse_allocate_payload_ack(raw, msg);
default:
DRM_ERROR("Got unknown reply 0x%02x\n", msg->req_type);
return false;
}
}
static bool drm_dp_sideband_parse_connection_status_notify(struct drm_dp_sideband_msg_rx *raw,
struct drm_dp_sideband_msg_req_body *msg)
{
int idx = 1;
msg->u.conn_stat.port_number = (raw->msg[idx] & 0xf0) >> 4;
idx++;
if (idx > raw->curlen)
goto fail_len;
memcpy(msg->u.conn_stat.guid, &raw->msg[idx], 16);
idx += 16;
if (idx > raw->curlen)
goto fail_len;
msg->u.conn_stat.legacy_device_plug_status = (raw->msg[idx] >> 6) & 0x1;
msg->u.conn_stat.displayport_device_plug_status = (raw->msg[idx] >> 5) & 0x1;
msg->u.conn_stat.message_capability_status = (raw->msg[idx] >> 4) & 0x1;
msg->u.conn_stat.input_port = (raw->msg[idx] >> 3) & 0x1;
msg->u.conn_stat.peer_device_type = (raw->msg[idx] & 0x7);
idx++;
return true;
fail_len:
DRM_DEBUG_KMS("connection status reply parse length fail %d %d\n", idx, raw->curlen);
return false;
}
static bool drm_dp_sideband_parse_resource_status_notify(struct drm_dp_sideband_msg_rx *raw,
struct drm_dp_sideband_msg_req_body *msg)
{
int idx = 1;
msg->u.resource_stat.port_number = (raw->msg[idx] & 0xf0) >> 4;
idx++;
if (idx > raw->curlen)
goto fail_len;
memcpy(msg->u.resource_stat.guid, &raw->msg[idx], 16);
idx += 16;
if (idx > raw->curlen)
goto fail_len;
msg->u.resource_stat.available_pbn = (raw->msg[idx] << 8) | (raw->msg[idx + 1]);
idx++;
return true;
fail_len:
DRM_DEBUG_KMS("resource status reply parse length fail %d %d\n", idx, raw->curlen);
return false;
}
static bool drm_dp_sideband_parse_req(struct drm_dp_sideband_msg_rx *raw,
struct drm_dp_sideband_msg_req_body *msg)
{
memset(msg, 0, sizeof(*msg));
msg->req_type = (raw->msg[0] & 0x7f);
switch (msg->req_type) {
case DP_CONNECTION_STATUS_NOTIFY:
return drm_dp_sideband_parse_connection_status_notify(raw, msg);
case DP_RESOURCE_STATUS_NOTIFY:
return drm_dp_sideband_parse_resource_status_notify(raw, msg);
default:
DRM_ERROR("Got unknown request 0x%02x\n", msg->req_type);
return false;
}
}
static int build_dpcd_write(struct drm_dp_sideband_msg_tx *msg, u8 port_num, u32 offset, u8 num_bytes, u8 *bytes)
{
struct drm_dp_sideband_msg_req_body req;
req.req_type = DP_REMOTE_DPCD_WRITE;
req.u.dpcd_write.port_number = port_num;
req.u.dpcd_write.dpcd_address = offset;
req.u.dpcd_write.num_bytes = num_bytes;
req.u.dpcd_write.bytes = bytes;
drm_dp_encode_sideband_req(&req, msg);
return 0;
}
static int build_link_address(struct drm_dp_sideband_msg_tx *msg)
{
struct drm_dp_sideband_msg_req_body req;
req.req_type = DP_LINK_ADDRESS;
drm_dp_encode_sideband_req(&req, msg);
return 0;
}
static int build_enum_path_resources(struct drm_dp_sideband_msg_tx *msg, int port_num)
{
struct drm_dp_sideband_msg_req_body req;
req.req_type = DP_ENUM_PATH_RESOURCES;
req.u.port_num.port_number = port_num;
drm_dp_encode_sideband_req(&req, msg);
msg->path_msg = true;
return 0;
}
static int build_allocate_payload(struct drm_dp_sideband_msg_tx *msg, int port_num,
u8 vcpi, uint16_t pbn,
u8 number_sdp_streams,
u8 *sdp_stream_sink)
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
{
struct drm_dp_sideband_msg_req_body req;
memset(&req, 0, sizeof(req));
req.req_type = DP_ALLOCATE_PAYLOAD;
req.u.allocate_payload.port_number = port_num;
req.u.allocate_payload.vcpi = vcpi;
req.u.allocate_payload.pbn = pbn;
req.u.allocate_payload.number_sdp_streams = number_sdp_streams;
memcpy(req.u.allocate_payload.sdp_stream_sink, sdp_stream_sink,
number_sdp_streams);
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
drm_dp_encode_sideband_req(&req, msg);
msg->path_msg = true;
return 0;
}
static int drm_dp_mst_assign_payload_id(struct drm_dp_mst_topology_mgr *mgr,
struct drm_dp_vcpi *vcpi)
{
int ret, vcpi_ret;
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
mutex_lock(&mgr->payload_lock);
ret = find_first_zero_bit(&mgr->payload_mask, mgr->max_payloads + 1);
if (ret > mgr->max_payloads) {
ret = -EINVAL;
DRM_DEBUG_KMS("out of payload ids %d\n", ret);
goto out_unlock;
}
vcpi_ret = find_first_zero_bit(&mgr->vcpi_mask, mgr->max_payloads + 1);
if (vcpi_ret > mgr->max_payloads) {
ret = -EINVAL;
DRM_DEBUG_KMS("out of vcpi ids %d\n", ret);
goto out_unlock;
}
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
set_bit(ret, &mgr->payload_mask);
set_bit(vcpi_ret, &mgr->vcpi_mask);
vcpi->vcpi = vcpi_ret + 1;
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
mgr->proposed_vcpis[ret - 1] = vcpi;
out_unlock:
mutex_unlock(&mgr->payload_lock);
return ret;
}
static void drm_dp_mst_put_payload_id(struct drm_dp_mst_topology_mgr *mgr,
int vcpi)
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
{
int i;
if (vcpi == 0)
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
return;
mutex_lock(&mgr->payload_lock);
DRM_DEBUG_KMS("putting payload %d\n", vcpi);
clear_bit(vcpi - 1, &mgr->vcpi_mask);
for (i = 0; i < mgr->max_payloads; i++) {
if (mgr->proposed_vcpis[i])
if (mgr->proposed_vcpis[i]->vcpi == vcpi) {
mgr->proposed_vcpis[i] = NULL;
clear_bit(i + 1, &mgr->payload_mask);
}
}
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
mutex_unlock(&mgr->payload_lock);
}
static bool check_txmsg_state(struct drm_dp_mst_topology_mgr *mgr,
struct drm_dp_sideband_msg_tx *txmsg)
{
bool ret;
/*
* All updates to txmsg->state are protected by mgr->qlock, and the two
* cases we check here are terminal states. For those the barriers
* provided by the wake_up/wait_event pair are enough.
*/
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
ret = (txmsg->state == DRM_DP_SIDEBAND_TX_RX ||
txmsg->state == DRM_DP_SIDEBAND_TX_TIMEOUT);
return ret;
}
static int drm_dp_mst_wait_tx_reply(struct drm_dp_mst_branch *mstb,
struct drm_dp_sideband_msg_tx *txmsg)
{
struct drm_dp_mst_topology_mgr *mgr = mstb->mgr;
int ret;
ret = wait_event_timeout(mgr->tx_waitq,
check_txmsg_state(mgr, txmsg),
(4 * HZ));
mutex_lock(&mstb->mgr->qlock);
if (ret > 0) {
if (txmsg->state == DRM_DP_SIDEBAND_TX_TIMEOUT) {
ret = -EIO;
goto out;
}
} else {
DRM_DEBUG_KMS("timedout msg send %p %d %d\n", txmsg, txmsg->state, txmsg->seqno);
/* dump some state */
ret = -EIO;
/* remove from q */
if (txmsg->state == DRM_DP_SIDEBAND_TX_QUEUED ||
txmsg->state == DRM_DP_SIDEBAND_TX_START_SEND) {
list_del(&txmsg->next);
}
if (txmsg->state == DRM_DP_SIDEBAND_TX_START_SEND ||
txmsg->state == DRM_DP_SIDEBAND_TX_SENT) {
mstb->tx_slots[txmsg->seqno] = NULL;
}
}
out:
mutex_unlock(&mgr->qlock);
return ret;
}
static struct drm_dp_mst_branch *drm_dp_add_mst_branch_device(u8 lct, u8 *rad)
{
struct drm_dp_mst_branch *mstb;
mstb = kzalloc(sizeof(*mstb), GFP_KERNEL);
if (!mstb)
return NULL;
mstb->lct = lct;
if (lct > 1)
memcpy(mstb->rad, rad, lct / 2);
INIT_LIST_HEAD(&mstb->ports);
kref_init(&mstb->kref);
return mstb;
}
static void drm_dp_free_mst_port(struct kref *kref);
static void drm_dp_free_mst_branch_device(struct kref *kref)
{
struct drm_dp_mst_branch *mstb = container_of(kref, struct drm_dp_mst_branch, kref);
if (mstb->port_parent) {
if (list_empty(&mstb->port_parent->next))
kref_put(&mstb->port_parent->kref, drm_dp_free_mst_port);
}
kfree(mstb);
}
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
static void drm_dp_destroy_mst_branch_device(struct kref *kref)
{
struct drm_dp_mst_branch *mstb = container_of(kref, struct drm_dp_mst_branch, kref);
struct drm_dp_mst_port *port, *tmp;
bool wake_tx = false;
/*
* init kref again to be used by ports to remove mst branch when it is
* not needed anymore
*/
kref_init(kref);
if (mstb->port_parent && list_empty(&mstb->port_parent->next))
kref_get(&mstb->port_parent->kref);
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
/*
* destroy all ports - don't need lock
* as there are no more references to the mst branch
* device at this point.
*/
list_for_each_entry_safe(port, tmp, &mstb->ports, next) {
list_del(&port->next);
drm_dp_put_port(port);
}
/* drop any tx slots msg */
mutex_lock(&mstb->mgr->qlock);
if (mstb->tx_slots[0]) {
mstb->tx_slots[0]->state = DRM_DP_SIDEBAND_TX_TIMEOUT;
mstb->tx_slots[0] = NULL;
wake_tx = true;
}
if (mstb->tx_slots[1]) {
mstb->tx_slots[1]->state = DRM_DP_SIDEBAND_TX_TIMEOUT;
mstb->tx_slots[1] = NULL;
wake_tx = true;
}
mutex_unlock(&mstb->mgr->qlock);
if (wake_tx)
wake_up(&mstb->mgr->tx_waitq);
kref_put(kref, drm_dp_free_mst_branch_device);
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
}
static void drm_dp_put_mst_branch_device(struct drm_dp_mst_branch *mstb)
{
kref_put(&mstb->kref, drm_dp_destroy_mst_branch_device);
}
static void drm_dp_port_teardown_pdt(struct drm_dp_mst_port *port, int old_pdt)
{
drm/dp-mst: Remove branches before dropping the reference When we unplug a dp mst branch we unreference the entire tree from the root towards the leaves. Which is ok, since that's the way the pointers and so also the refcounts go. But when we drop the reference we must make sure that we remove the branches/ports from the lists/pointers before dropping the reference. Otherwise the get_validated functions will still return it instead of returning NULL (which indicates a potentially on-going unplug). The mst branch destroy gets this right for ports: First it deletes the port from the ports list, then it unrefs. But the ports destroy function gets it wrong: First it unrefs, then it drops the ref. Which means a zombie mst branch can still be validate with get_validated_mstb_ref when it shouldn't. Fix this. This should address a backtrace Dave dug out somewhere on unplug: [<ffffffffa00cc262>] drm_dp_mst_get_validated_mstb_ref_locked+0x92/0xa0 [drm_kms_helper] [<ffffffffa00cc211>] drm_dp_mst_get_validated_mstb_ref_locked+0x41/0xa0 [drm_kms_helper] [<ffffffffa00cc2aa>] drm_dp_get_validated_mstb_ref+0x3a/0x60 [drm_kms_helper] [<ffffffffa00cc2fb>] drm_dp_payload_send_msg.isra.14+0x2b/0x100 [drm_kms_helper] [<ffffffffa00cc547>] drm_dp_update_payload_part1+0x177/0x360 [drm_kms_helper] [<ffffffffa015c52e>] intel_mst_disable_dp+0x3e/0x80 [i915] [<ffffffffa013d60b>] haswell_crtc_disable+0x1cb/0x340 [i915] [<ffffffffa0136739>] intel_crtc_control+0x49/0x100 [i915] [<ffffffffa0136857>] intel_crtc_update_dpms+0x67/0x80 [i915] [<ffffffffa013fa59>] intel_connector_dpms+0x59/0x70 [i915] [<ffffffffa015c752>] intel_dp_destroy_mst_connector+0x32/0xc0 [i915] [<ffffffffa00cb44b>] drm_dp_destroy_port+0x6b/0xa0 [drm_kms_helper] [<ffffffffa00cb588>] drm_dp_destroy_mst_branch_device+0x108/0x130 [drm_kms_helper] [<ffffffffa00cb3cd>] drm_dp_port_teardown_pdt+0x3d/0x50 [drm_kms_helper] [<ffffffffa00cdb79>] drm_dp_mst_handle_up_req+0x499/0x540 [drm_kms_helper] [<ffffffff810d9ead>] ? trace_hardirqs_on_caller+0x15d/0x200 [<ffffffffa00cdc73>] drm_dp_mst_hpd_irq+0x53/0xa00 [drm_kms_helper] [<ffffffffa00c7dfb>] ? drm_dp_dpcd_read+0x1b/0x20 [drm_kms_helper] [<ffffffffa0153ed8>] ? intel_dp_dpcd_read_wake+0x38/0x70 [i915] [<ffffffffa015a225>] intel_dp_check_mst_status+0xb5/0x250 [i915] [<ffffffffa015ac71>] intel_dp_hpd_pulse+0x181/0x210 [i915] [<ffffffffa01104f6>] i915_digport_work_func+0x96/0x120 [i915] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-12-08 21:55:22 +00:00
struct drm_dp_mst_branch *mstb;
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
switch (old_pdt) {
case DP_PEER_DEVICE_DP_LEGACY_CONV:
case DP_PEER_DEVICE_SST_SINK:
/* remove i2c over sideband */
drm_dp_mst_unregister_i2c_bus(&port->aux);
break;
case DP_PEER_DEVICE_MST_BRANCHING:
drm/dp-mst: Remove branches before dropping the reference When we unplug a dp mst branch we unreference the entire tree from the root towards the leaves. Which is ok, since that's the way the pointers and so also the refcounts go. But when we drop the reference we must make sure that we remove the branches/ports from the lists/pointers before dropping the reference. Otherwise the get_validated functions will still return it instead of returning NULL (which indicates a potentially on-going unplug). The mst branch destroy gets this right for ports: First it deletes the port from the ports list, then it unrefs. But the ports destroy function gets it wrong: First it unrefs, then it drops the ref. Which means a zombie mst branch can still be validate with get_validated_mstb_ref when it shouldn't. Fix this. This should address a backtrace Dave dug out somewhere on unplug: [<ffffffffa00cc262>] drm_dp_mst_get_validated_mstb_ref_locked+0x92/0xa0 [drm_kms_helper] [<ffffffffa00cc211>] drm_dp_mst_get_validated_mstb_ref_locked+0x41/0xa0 [drm_kms_helper] [<ffffffffa00cc2aa>] drm_dp_get_validated_mstb_ref+0x3a/0x60 [drm_kms_helper] [<ffffffffa00cc2fb>] drm_dp_payload_send_msg.isra.14+0x2b/0x100 [drm_kms_helper] [<ffffffffa00cc547>] drm_dp_update_payload_part1+0x177/0x360 [drm_kms_helper] [<ffffffffa015c52e>] intel_mst_disable_dp+0x3e/0x80 [i915] [<ffffffffa013d60b>] haswell_crtc_disable+0x1cb/0x340 [i915] [<ffffffffa0136739>] intel_crtc_control+0x49/0x100 [i915] [<ffffffffa0136857>] intel_crtc_update_dpms+0x67/0x80 [i915] [<ffffffffa013fa59>] intel_connector_dpms+0x59/0x70 [i915] [<ffffffffa015c752>] intel_dp_destroy_mst_connector+0x32/0xc0 [i915] [<ffffffffa00cb44b>] drm_dp_destroy_port+0x6b/0xa0 [drm_kms_helper] [<ffffffffa00cb588>] drm_dp_destroy_mst_branch_device+0x108/0x130 [drm_kms_helper] [<ffffffffa00cb3cd>] drm_dp_port_teardown_pdt+0x3d/0x50 [drm_kms_helper] [<ffffffffa00cdb79>] drm_dp_mst_handle_up_req+0x499/0x540 [drm_kms_helper] [<ffffffff810d9ead>] ? trace_hardirqs_on_caller+0x15d/0x200 [<ffffffffa00cdc73>] drm_dp_mst_hpd_irq+0x53/0xa00 [drm_kms_helper] [<ffffffffa00c7dfb>] ? drm_dp_dpcd_read+0x1b/0x20 [drm_kms_helper] [<ffffffffa0153ed8>] ? intel_dp_dpcd_read_wake+0x38/0x70 [i915] [<ffffffffa015a225>] intel_dp_check_mst_status+0xb5/0x250 [i915] [<ffffffffa015ac71>] intel_dp_hpd_pulse+0x181/0x210 [i915] [<ffffffffa01104f6>] i915_digport_work_func+0x96/0x120 [i915] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-12-08 21:55:22 +00:00
mstb = port->mstb;
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
port->mstb = NULL;
drm/dp-mst: Remove branches before dropping the reference When we unplug a dp mst branch we unreference the entire tree from the root towards the leaves. Which is ok, since that's the way the pointers and so also the refcounts go. But when we drop the reference we must make sure that we remove the branches/ports from the lists/pointers before dropping the reference. Otherwise the get_validated functions will still return it instead of returning NULL (which indicates a potentially on-going unplug). The mst branch destroy gets this right for ports: First it deletes the port from the ports list, then it unrefs. But the ports destroy function gets it wrong: First it unrefs, then it drops the ref. Which means a zombie mst branch can still be validate with get_validated_mstb_ref when it shouldn't. Fix this. This should address a backtrace Dave dug out somewhere on unplug: [<ffffffffa00cc262>] drm_dp_mst_get_validated_mstb_ref_locked+0x92/0xa0 [drm_kms_helper] [<ffffffffa00cc211>] drm_dp_mst_get_validated_mstb_ref_locked+0x41/0xa0 [drm_kms_helper] [<ffffffffa00cc2aa>] drm_dp_get_validated_mstb_ref+0x3a/0x60 [drm_kms_helper] [<ffffffffa00cc2fb>] drm_dp_payload_send_msg.isra.14+0x2b/0x100 [drm_kms_helper] [<ffffffffa00cc547>] drm_dp_update_payload_part1+0x177/0x360 [drm_kms_helper] [<ffffffffa015c52e>] intel_mst_disable_dp+0x3e/0x80 [i915] [<ffffffffa013d60b>] haswell_crtc_disable+0x1cb/0x340 [i915] [<ffffffffa0136739>] intel_crtc_control+0x49/0x100 [i915] [<ffffffffa0136857>] intel_crtc_update_dpms+0x67/0x80 [i915] [<ffffffffa013fa59>] intel_connector_dpms+0x59/0x70 [i915] [<ffffffffa015c752>] intel_dp_destroy_mst_connector+0x32/0xc0 [i915] [<ffffffffa00cb44b>] drm_dp_destroy_port+0x6b/0xa0 [drm_kms_helper] [<ffffffffa00cb588>] drm_dp_destroy_mst_branch_device+0x108/0x130 [drm_kms_helper] [<ffffffffa00cb3cd>] drm_dp_port_teardown_pdt+0x3d/0x50 [drm_kms_helper] [<ffffffffa00cdb79>] drm_dp_mst_handle_up_req+0x499/0x540 [drm_kms_helper] [<ffffffff810d9ead>] ? trace_hardirqs_on_caller+0x15d/0x200 [<ffffffffa00cdc73>] drm_dp_mst_hpd_irq+0x53/0xa00 [drm_kms_helper] [<ffffffffa00c7dfb>] ? drm_dp_dpcd_read+0x1b/0x20 [drm_kms_helper] [<ffffffffa0153ed8>] ? intel_dp_dpcd_read_wake+0x38/0x70 [i915] [<ffffffffa015a225>] intel_dp_check_mst_status+0xb5/0x250 [i915] [<ffffffffa015ac71>] intel_dp_hpd_pulse+0x181/0x210 [i915] [<ffffffffa01104f6>] i915_digport_work_func+0x96/0x120 [i915] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-12-08 21:55:22 +00:00
drm_dp_put_mst_branch_device(mstb);
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
break;
}
}
static void drm_dp_destroy_port(struct kref *kref)
{
struct drm_dp_mst_port *port = container_of(kref, struct drm_dp_mst_port, kref);
struct drm_dp_mst_topology_mgr *mgr = port->mgr;
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
if (!port->input) {
port->vcpi.num_slots = 0;
kfree(port->cached_edid);
/*
* The only time we don't have a connector
* on an output port is if the connector init
* fails.
*/
if (port->connector) {
/* we can't destroy the connector here, as
* we might be holding the mode_config.mutex
* from an EDID retrieval */
mutex_lock(&mgr->destroy_connector_lock);
kref_get(&port->parent->kref);
list_add(&port->next, &mgr->destroy_connector_list);
mutex_unlock(&mgr->destroy_connector_lock);
schedule_work(&mgr->destroy_connector_work);
return;
}
/* no need to clean up vcpi
* as if we have no connector we never setup a vcpi */
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
drm_dp_port_teardown_pdt(port, port->pdt);
}
kfree(port);
}
static void drm_dp_put_port(struct drm_dp_mst_port *port)
{
kref_put(&port->kref, drm_dp_destroy_port);
}
static struct drm_dp_mst_branch *drm_dp_mst_get_validated_mstb_ref_locked(struct drm_dp_mst_branch *mstb, struct drm_dp_mst_branch *to_find)
{
struct drm_dp_mst_port *port;
struct drm_dp_mst_branch *rmstb;
if (to_find == mstb) {
kref_get(&mstb->kref);
return mstb;
}
list_for_each_entry(port, &mstb->ports, next) {
if (port->mstb) {
rmstb = drm_dp_mst_get_validated_mstb_ref_locked(port->mstb, to_find);
if (rmstb)
return rmstb;
}
}
return NULL;
}
static struct drm_dp_mst_branch *drm_dp_get_validated_mstb_ref(struct drm_dp_mst_topology_mgr *mgr, struct drm_dp_mst_branch *mstb)
{
struct drm_dp_mst_branch *rmstb = NULL;
mutex_lock(&mgr->lock);
if (mgr->mst_primary)
rmstb = drm_dp_mst_get_validated_mstb_ref_locked(mgr->mst_primary, mstb);
mutex_unlock(&mgr->lock);
return rmstb;
}
static struct drm_dp_mst_port *drm_dp_mst_get_port_ref_locked(struct drm_dp_mst_branch *mstb, struct drm_dp_mst_port *to_find)
{
struct drm_dp_mst_port *port, *mport;
list_for_each_entry(port, &mstb->ports, next) {
if (port == to_find) {
kref_get(&port->kref);
return port;
}
if (port->mstb) {
mport = drm_dp_mst_get_port_ref_locked(port->mstb, to_find);
if (mport)
return mport;
}
}
return NULL;
}
static struct drm_dp_mst_port *drm_dp_get_validated_port_ref(struct drm_dp_mst_topology_mgr *mgr, struct drm_dp_mst_port *port)
{
struct drm_dp_mst_port *rport = NULL;
mutex_lock(&mgr->lock);
if (mgr->mst_primary)
rport = drm_dp_mst_get_port_ref_locked(mgr->mst_primary, port);
mutex_unlock(&mgr->lock);
return rport;
}
static struct drm_dp_mst_port *drm_dp_get_port(struct drm_dp_mst_branch *mstb, u8 port_num)
{
struct drm_dp_mst_port *port;
list_for_each_entry(port, &mstb->ports, next) {
if (port->port_num == port_num) {
kref_get(&port->kref);
return port;
}
}
return NULL;
}
/*
* calculate a new RAD for this MST branch device
* if parent has an LCT of 2 then it has 1 nibble of RAD,
* if parent has an LCT of 3 then it has 2 nibbles of RAD,
*/
static u8 drm_dp_calculate_rad(struct drm_dp_mst_port *port,
u8 *rad)
{
int parent_lct = port->parent->lct;
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
int shift = 4;
int idx = (parent_lct - 1) / 2;
if (parent_lct > 1) {
memcpy(rad, port->parent->rad, idx + 1);
shift = (parent_lct % 2) ? 4 : 0;
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
} else
rad[0] = 0;
rad[idx] |= port->port_num << shift;
return parent_lct + 1;
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
}
/*
* return sends link address for new mstb
*/
static bool drm_dp_port_setup_pdt(struct drm_dp_mst_port *port)
{
int ret;
u8 rad[6], lct;
bool send_link = false;
switch (port->pdt) {
case DP_PEER_DEVICE_DP_LEGACY_CONV:
case DP_PEER_DEVICE_SST_SINK:
/* add i2c over sideband */
ret = drm_dp_mst_register_i2c_bus(&port->aux);
break;
case DP_PEER_DEVICE_MST_BRANCHING:
lct = drm_dp_calculate_rad(port, rad);
port->mstb = drm_dp_add_mst_branch_device(lct, rad);
port->mstb->mgr = port->mgr;
port->mstb->port_parent = port;
send_link = true;
break;
}
return send_link;
}
static void drm_dp_check_mstb_guid(struct drm_dp_mst_branch *mstb, u8 *guid)
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
{
int ret;
memcpy(mstb->guid, guid, 16);
if (!drm_dp_validate_guid(mstb->mgr, mstb->guid)) {
if (mstb->port_parent) {
ret = drm_dp_send_dpcd_write(
mstb->mgr,
mstb->port_parent,
DP_GUID,
16,
mstb->guid);
} else {
ret = drm_dp_dpcd_write(
mstb->mgr->aux,
DP_GUID,
mstb->guid,
16);
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
}
}
}
static void build_mst_prop_path(const struct drm_dp_mst_branch *mstb,
int pnum,
char *proppath,
size_t proppath_size)
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
{
int i;
char temp[8];
snprintf(proppath, proppath_size, "mst:%d", mstb->mgr->conn_base_id);
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
for (i = 0; i < (mstb->lct - 1); i++) {
int shift = (i % 2) ? 0 : 4;
int port_num = (mstb->rad[i / 2] >> shift) & 0xf;
snprintf(temp, sizeof(temp), "-%d", port_num);
strlcat(proppath, temp, proppath_size);
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
}
snprintf(temp, sizeof(temp), "-%d", pnum);
strlcat(proppath, temp, proppath_size);
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
}
static void drm_dp_add_port(struct drm_dp_mst_branch *mstb,
struct device *dev,
struct drm_dp_link_addr_reply_port *port_msg)
{
struct drm_dp_mst_port *port;
bool ret;
bool created = false;
int old_pdt = 0;
int old_ddps = 0;
port = drm_dp_get_port(mstb, port_msg->port_number);
if (!port) {
port = kzalloc(sizeof(*port), GFP_KERNEL);
if (!port)
return;
kref_init(&port->kref);
port->parent = mstb;
port->port_num = port_msg->port_number;
port->mgr = mstb->mgr;
port->aux.name = "DPMST";
port->aux.dev = dev;
created = true;
} else {
old_pdt = port->pdt;
old_ddps = port->ddps;
}
port->pdt = port_msg->peer_device_type;
port->input = port_msg->input_port;
port->mcs = port_msg->mcs;
port->ddps = port_msg->ddps;
port->ldps = port_msg->legacy_device_plug_status;
port->dpcd_rev = port_msg->dpcd_revision;
port->num_sdp_streams = port_msg->num_sdp_streams;
port->num_sdp_stream_sinks = port_msg->num_sdp_stream_sinks;
/* manage mstb port lists with mgr lock - take a reference
for this list */
if (created) {
mutex_lock(&mstb->mgr->lock);
kref_get(&port->kref);
list_add(&port->next, &mstb->ports);
mutex_unlock(&mstb->mgr->lock);
}
if (old_ddps != port->ddps) {
if (port->ddps) {
if (!port->input)
drm_dp_send_enum_path_resources(mstb->mgr, mstb, port);
} else {
port->available_pbn = 0;
}
}
if (old_pdt != port->pdt && !port->input) {
drm_dp_port_teardown_pdt(port, old_pdt);
ret = drm_dp_port_setup_pdt(port);
if (ret == true)
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
drm_dp_send_link_address(mstb->mgr, port->mstb);
}
if (created && !port->input) {
char proppath[255];
build_mst_prop_path(mstb, port->port_num, proppath, sizeof(proppath));
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
port->connector = (*mstb->mgr->cbs->add_connector)(mstb->mgr, port, proppath);
if (!port->connector) {
/* remove it from the port list */
mutex_lock(&mstb->mgr->lock);
list_del(&port->next);
mutex_unlock(&mstb->mgr->lock);
/* drop port list reference */
drm_dp_put_port(port);
goto out;
}
if (port->port_num >= DP_MST_LOGICAL_PORT_0) {
port->cached_edid = drm_get_edid(port->connector, &port->aux.ddc);
drm_mode_connector_set_tile_property(port->connector);
}
(*mstb->mgr->cbs->register_connector)(port->connector);
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
}
out:
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
/* put reference to this port */
drm_dp_put_port(port);
}
static void drm_dp_update_port(struct drm_dp_mst_branch *mstb,
struct drm_dp_connection_status_notify *conn_stat)
{
struct drm_dp_mst_port *port;
int old_pdt;
int old_ddps;
bool dowork = false;
port = drm_dp_get_port(mstb, conn_stat->port_number);
if (!port)
return;
old_ddps = port->ddps;
old_pdt = port->pdt;
port->pdt = conn_stat->peer_device_type;
port->mcs = conn_stat->message_capability_status;
port->ldps = conn_stat->legacy_device_plug_status;
port->ddps = conn_stat->displayport_device_plug_status;
if (old_ddps != port->ddps) {
if (port->ddps) {
dowork = true;
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
} else {
port->available_pbn = 0;
}
}
if (old_pdt != port->pdt && !port->input) {
drm_dp_port_teardown_pdt(port, old_pdt);
if (drm_dp_port_setup_pdt(port))
dowork = true;
}
drm_dp_put_port(port);
if (dowork)
queue_work(system_long_wq, &mstb->mgr->work);
}
static struct drm_dp_mst_branch *drm_dp_get_mst_branch_device(struct drm_dp_mst_topology_mgr *mgr,
u8 lct, u8 *rad)
{
struct drm_dp_mst_branch *mstb;
struct drm_dp_mst_port *port;
int i;
/* find the port by iterating down */
mutex_lock(&mgr->lock);
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
mstb = mgr->mst_primary;
for (i = 0; i < lct - 1; i++) {
int shift = (i % 2) ? 0 : 4;
int port_num = (rad[i / 2] >> shift) & 0xf;
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
list_for_each_entry(port, &mstb->ports, next) {
if (port->port_num == port_num) {
mstb = port->mstb;
if (!mstb) {
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
DRM_ERROR("failed to lookup MSTB with lct %d, rad %02x\n", lct, rad[0]);
goto out;
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
}
break;
}
}
}
kref_get(&mstb->kref);
out:
mutex_unlock(&mgr->lock);
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
return mstb;
}
static struct drm_dp_mst_branch *get_mst_branch_device_by_guid_helper(
struct drm_dp_mst_branch *mstb,
uint8_t *guid)
{
struct drm_dp_mst_branch *found_mstb;
struct drm_dp_mst_port *port;
if (memcmp(mstb->guid, guid, 16) == 0)
return mstb;
list_for_each_entry(port, &mstb->ports, next) {
if (!port->mstb)
continue;
found_mstb = get_mst_branch_device_by_guid_helper(port->mstb, guid);
if (found_mstb)
return found_mstb;
}
return NULL;
}
static struct drm_dp_mst_branch *drm_dp_get_mst_branch_device_by_guid(
struct drm_dp_mst_topology_mgr *mgr,
uint8_t *guid)
{
struct drm_dp_mst_branch *mstb;
/* find the port by iterating down */
mutex_lock(&mgr->lock);
mstb = get_mst_branch_device_by_guid_helper(mgr->mst_primary, guid);
if (mstb)
kref_get(&mstb->kref);
mutex_unlock(&mgr->lock);
return mstb;
}
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
static void drm_dp_check_and_send_link_address(struct drm_dp_mst_topology_mgr *mgr,
struct drm_dp_mst_branch *mstb)
{
struct drm_dp_mst_port *port;
struct drm_dp_mst_branch *mstb_child;
if (!mstb->link_address_sent)
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
drm_dp_send_link_address(mgr, mstb);
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
list_for_each_entry(port, &mstb->ports, next) {
if (port->input)
continue;
if (!port->ddps)
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
continue;
if (!port->available_pbn)
drm_dp_send_enum_path_resources(mgr, mstb, port);
if (port->mstb) {
mstb_child = drm_dp_get_validated_mstb_ref(mgr, port->mstb);
if (mstb_child) {
drm_dp_check_and_send_link_address(mgr, mstb_child);
drm_dp_put_mst_branch_device(mstb_child);
}
}
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
}
}
static void drm_dp_mst_link_probe_work(struct work_struct *work)
{
struct drm_dp_mst_topology_mgr *mgr = container_of(work, struct drm_dp_mst_topology_mgr, work);
struct drm_dp_mst_branch *mstb;
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
mutex_lock(&mgr->lock);
mstb = mgr->mst_primary;
if (mstb) {
kref_get(&mstb->kref);
}
mutex_unlock(&mgr->lock);
if (mstb) {
drm_dp_check_and_send_link_address(mgr, mstb);
drm_dp_put_mst_branch_device(mstb);
}
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
}
static bool drm_dp_validate_guid(struct drm_dp_mst_topology_mgr *mgr,
u8 *guid)
{
static u8 zero_guid[16];
if (!memcmp(guid, zero_guid, 16)) {
u64 salt = get_jiffies_64();
memcpy(&guid[0], &salt, sizeof(u64));
memcpy(&guid[8], &salt, sizeof(u64));
return false;
}
return true;
}
#if 0
static int build_dpcd_read(struct drm_dp_sideband_msg_tx *msg, u8 port_num, u32 offset, u8 num_bytes)
{
struct drm_dp_sideband_msg_req_body req;
req.req_type = DP_REMOTE_DPCD_READ;
req.u.dpcd_read.port_number = port_num;
req.u.dpcd_read.dpcd_address = offset;
req.u.dpcd_read.num_bytes = num_bytes;
drm_dp_encode_sideband_req(&req, msg);
return 0;
}
#endif
static int drm_dp_send_sideband_msg(struct drm_dp_mst_topology_mgr *mgr,
bool up, u8 *msg, int len)
{
int ret;
int regbase = up ? DP_SIDEBAND_MSG_UP_REP_BASE : DP_SIDEBAND_MSG_DOWN_REQ_BASE;
int tosend, total, offset;
int retries = 0;
retry:
total = len;
offset = 0;
do {
tosend = min3(mgr->max_dpcd_transaction_bytes, 16, total);
ret = drm_dp_dpcd_write(mgr->aux, regbase + offset,
&msg[offset],
tosend);
if (ret != tosend) {
if (ret == -EIO && retries < 5) {
retries++;
goto retry;
}
DRM_DEBUG_KMS("failed to dpcd write %d %d\n", tosend, ret);
return -EIO;
}
offset += tosend;
total -= tosend;
} while (total > 0);
return 0;
}
static int set_hdr_from_dst_qlock(struct drm_dp_sideband_msg_hdr *hdr,
struct drm_dp_sideband_msg_tx *txmsg)
{
struct drm_dp_mst_branch *mstb = txmsg->dst;
u8 req_type;
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
/* both msg slots are full */
if (txmsg->seqno == -1) {
if (mstb->tx_slots[0] && mstb->tx_slots[1]) {
DRM_DEBUG_KMS("%s: failed to find slot\n", __func__);
return -EAGAIN;
}
if (mstb->tx_slots[0] == NULL && mstb->tx_slots[1] == NULL) {
txmsg->seqno = mstb->last_seqno;
mstb->last_seqno ^= 1;
} else if (mstb->tx_slots[0] == NULL)
txmsg->seqno = 0;
else
txmsg->seqno = 1;
mstb->tx_slots[txmsg->seqno] = txmsg;
}
req_type = txmsg->msg[0] & 0x7f;
if (req_type == DP_CONNECTION_STATUS_NOTIFY ||
req_type == DP_RESOURCE_STATUS_NOTIFY)
hdr->broadcast = 1;
else
hdr->broadcast = 0;
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
hdr->path_msg = txmsg->path_msg;
hdr->lct = mstb->lct;
hdr->lcr = mstb->lct - 1;
if (mstb->lct > 1)
memcpy(hdr->rad, mstb->rad, mstb->lct / 2);
hdr->seqno = txmsg->seqno;
return 0;
}
/*
* process a single block of the next message in the sideband queue
*/
static int process_single_tx_qlock(struct drm_dp_mst_topology_mgr *mgr,
struct drm_dp_sideband_msg_tx *txmsg,
bool up)
{
u8 chunk[48];
struct drm_dp_sideband_msg_hdr hdr;
int len, space, idx, tosend;
int ret;
memset(&hdr, 0, sizeof(struct drm_dp_sideband_msg_hdr));
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
if (txmsg->state == DRM_DP_SIDEBAND_TX_QUEUED) {
txmsg->seqno = -1;
txmsg->state = DRM_DP_SIDEBAND_TX_START_SEND;
}
/* make hdr from dst mst - for replies use seqno
otherwise assign one */
ret = set_hdr_from_dst_qlock(&hdr, txmsg);
if (ret < 0)
return ret;
/* amount left to send in this message */
len = txmsg->cur_len - txmsg->cur_offset;
/* 48 - sideband msg size - 1 byte for data CRC, x header bytes */
space = 48 - 1 - drm_dp_calc_sb_hdr_size(&hdr);
tosend = min(len, space);
if (len == txmsg->cur_len)
hdr.somt = 1;
if (space >= len)
hdr.eomt = 1;
hdr.msg_len = tosend + 1;
drm_dp_encode_sideband_msg_hdr(&hdr, chunk, &idx);
memcpy(&chunk[idx], &txmsg->msg[txmsg->cur_offset], tosend);
/* add crc at end */
drm_dp_crc_sideband_chunk_req(&chunk[idx], tosend);
idx += tosend + 1;
ret = drm_dp_send_sideband_msg(mgr, up, chunk, idx);
if (ret) {
DRM_DEBUG_KMS("sideband msg failed to send\n");
return ret;
}
txmsg->cur_offset += tosend;
if (txmsg->cur_offset == txmsg->cur_len) {
txmsg->state = DRM_DP_SIDEBAND_TX_SENT;
return 1;
}
return 0;
}
static void process_single_down_tx_qlock(struct drm_dp_mst_topology_mgr *mgr)
{
struct drm_dp_sideband_msg_tx *txmsg;
int ret;
WARN_ON(!mutex_is_locked(&mgr->qlock));
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
/* construct a chunk from the first msg in the tx_msg queue */
if (list_empty(&mgr->tx_msg_downq)) {
mgr->tx_down_in_progress = false;
return;
}
mgr->tx_down_in_progress = true;
txmsg = list_first_entry(&mgr->tx_msg_downq, struct drm_dp_sideband_msg_tx, next);
ret = process_single_tx_qlock(mgr, txmsg, false);
if (ret == 1) {
/* txmsg is sent it should be in the slots now */
list_del(&txmsg->next);
} else if (ret) {
DRM_DEBUG_KMS("failed to send msg in q %d\n", ret);
list_del(&txmsg->next);
if (txmsg->seqno != -1)
txmsg->dst->tx_slots[txmsg->seqno] = NULL;
txmsg->state = DRM_DP_SIDEBAND_TX_TIMEOUT;
wake_up(&mgr->tx_waitq);
}
if (list_empty(&mgr->tx_msg_downq)) {
mgr->tx_down_in_progress = false;
return;
}
}
/* called holding qlock */
static void process_single_up_tx_qlock(struct drm_dp_mst_topology_mgr *mgr,
struct drm_dp_sideband_msg_tx *txmsg)
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
{
int ret;
/* construct a chunk from the first msg in the tx_msg queue */
ret = process_single_tx_qlock(mgr, txmsg, true);
if (ret != 1)
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
DRM_DEBUG_KMS("failed to send msg in q %d\n", ret);
txmsg->dst->tx_slots[txmsg->seqno] = NULL;
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
}
static void drm_dp_queue_down_tx(struct drm_dp_mst_topology_mgr *mgr,
struct drm_dp_sideband_msg_tx *txmsg)
{
mutex_lock(&mgr->qlock);
list_add_tail(&txmsg->next, &mgr->tx_msg_downq);
if (!mgr->tx_down_in_progress)
process_single_down_tx_qlock(mgr);
mutex_unlock(&mgr->qlock);
}
static void drm_dp_send_link_address(struct drm_dp_mst_topology_mgr *mgr,
struct drm_dp_mst_branch *mstb)
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
{
int len;
struct drm_dp_sideband_msg_tx *txmsg;
int ret;
txmsg = kzalloc(sizeof(*txmsg), GFP_KERNEL);
if (!txmsg)
return;
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
txmsg->dst = mstb;
len = build_link_address(txmsg);
mstb->link_address_sent = true;
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
drm_dp_queue_down_tx(mgr, txmsg);
ret = drm_dp_mst_wait_tx_reply(mstb, txmsg);
if (ret > 0) {
int i;
if (txmsg->reply.reply_type == 1)
DRM_DEBUG_KMS("link address nak received\n");
else {
DRM_DEBUG_KMS("link address reply: %d\n", txmsg->reply.u.link_addr.nports);
for (i = 0; i < txmsg->reply.u.link_addr.nports; i++) {
DRM_DEBUG_KMS("port %d: input %d, pdt: %d, pn: %d, dpcd_rev: %02x, mcs: %d, ddps: %d, ldps %d, sdp %d/%d\n", i,
txmsg->reply.u.link_addr.ports[i].input_port,
txmsg->reply.u.link_addr.ports[i].peer_device_type,
txmsg->reply.u.link_addr.ports[i].port_number,
txmsg->reply.u.link_addr.ports[i].dpcd_revision,
txmsg->reply.u.link_addr.ports[i].mcs,
txmsg->reply.u.link_addr.ports[i].ddps,
txmsg->reply.u.link_addr.ports[i].legacy_device_plug_status,
txmsg->reply.u.link_addr.ports[i].num_sdp_streams,
txmsg->reply.u.link_addr.ports[i].num_sdp_stream_sinks);
}
drm_dp_check_mstb_guid(mstb, txmsg->reply.u.link_addr.guid);
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
for (i = 0; i < txmsg->reply.u.link_addr.nports; i++) {
drm_dp_add_port(mstb, mgr->dev, &txmsg->reply.u.link_addr.ports[i]);
}
(*mgr->cbs->hotplug)(mgr);
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
}
} else {
mstb->link_address_sent = false;
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
DRM_DEBUG_KMS("link address failed %d\n", ret);
}
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
kfree(txmsg);
}
static int drm_dp_send_enum_path_resources(struct drm_dp_mst_topology_mgr *mgr,
struct drm_dp_mst_branch *mstb,
struct drm_dp_mst_port *port)
{
int len;
struct drm_dp_sideband_msg_tx *txmsg;
int ret;
txmsg = kzalloc(sizeof(*txmsg), GFP_KERNEL);
if (!txmsg)
return -ENOMEM;
txmsg->dst = mstb;
len = build_enum_path_resources(txmsg, port->port_num);
drm_dp_queue_down_tx(mgr, txmsg);
ret = drm_dp_mst_wait_tx_reply(mstb, txmsg);
if (ret > 0) {
if (txmsg->reply.reply_type == 1)
DRM_DEBUG_KMS("enum path resources nak received\n");
else {
if (port->port_num != txmsg->reply.u.path_resources.port_number)
DRM_ERROR("got incorrect port in response\n");
DRM_DEBUG_KMS("enum path resources %d: %d %d\n", txmsg->reply.u.path_resources.port_number, txmsg->reply.u.path_resources.full_payload_bw_number,
txmsg->reply.u.path_resources.avail_payload_bw_number);
port->available_pbn = txmsg->reply.u.path_resources.avail_payload_bw_number;
}
}
kfree(txmsg);
return 0;
}
static struct drm_dp_mst_port *drm_dp_get_last_connected_port_to_mstb(struct drm_dp_mst_branch *mstb)
{
if (!mstb->port_parent)
return NULL;
if (mstb->port_parent->mstb != mstb)
return mstb->port_parent;
return drm_dp_get_last_connected_port_to_mstb(mstb->port_parent->parent);
}
static struct drm_dp_mst_branch *drm_dp_get_last_connected_port_and_mstb(struct drm_dp_mst_topology_mgr *mgr,
struct drm_dp_mst_branch *mstb,
int *port_num)
{
struct drm_dp_mst_branch *rmstb = NULL;
struct drm_dp_mst_port *found_port;
mutex_lock(&mgr->lock);
if (mgr->mst_primary) {
found_port = drm_dp_get_last_connected_port_to_mstb(mstb);
if (found_port) {
rmstb = found_port->parent;
kref_get(&rmstb->kref);
*port_num = found_port->port_num;
}
}
mutex_unlock(&mgr->lock);
return rmstb;
}
static int drm_dp_payload_send_msg(struct drm_dp_mst_topology_mgr *mgr,
struct drm_dp_mst_port *port,
int id,
int pbn)
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
{
struct drm_dp_sideband_msg_tx *txmsg;
struct drm_dp_mst_branch *mstb;
int len, ret, port_num;
u8 sinks[DRM_DP_MAX_SDP_STREAMS];
int i;
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
drm/dp/mst: Validate port in drm_dp_payload_send_msg() With the joys of things running concurrently, there's always a chance that the port we get passed in drm_dp_payload_send_msg() isn't actually valid anymore. Because of this, we need to make sure we validate the reference to the port before we use it otherwise we risk running into various race conditions. For instance, on the Dell MST monitor I have here for testing, hotplugging it enough times causes us to kernel panic: [drm:intel_mst_enable_dp] 1 [drm:drm_dp_update_payload_part2] payload 0 1 [drm:intel_get_hpd_pins] hotplug event received, stat 0x00200000, dig 0x10101011, pins 0x00000020 [drm:intel_hpd_irq_handler] digital hpd port B - short [drm:intel_dp_hpd_pulse] got hpd irq on port B - short [drm:intel_dp_check_mst_status] got esi 00 10 00 [drm:drm_dp_update_payload_part2] payload 1 1 general protection fault: 0000 [#1] SMP … Call Trace: [<ffffffffa012b632>] drm_dp_update_payload_part2+0xc2/0x130 [drm_kms_helper] [<ffffffffa032ef08>] intel_mst_enable_dp+0xf8/0x180 [i915] [<ffffffffa0310dbd>] haswell_crtc_enable+0x3ed/0x8c0 [i915] [<ffffffffa030c84d>] intel_atomic_commit+0x5ad/0x1590 [i915] [<ffffffffa01db877>] ? drm_atomic_set_crtc_for_connector+0x57/0xe0 [drm] [<ffffffffa01dc4e7>] drm_atomic_commit+0x37/0x60 [drm] [<ffffffffa0130a3a>] drm_atomic_helper_set_config+0x7a/0xb0 [drm_kms_helper] [<ffffffffa01cc482>] drm_mode_set_config_internal+0x62/0x100 [drm] [<ffffffffa01d02ad>] drm_mode_setcrtc+0x3cd/0x4e0 [drm] [<ffffffffa01c18e3>] drm_ioctl+0x143/0x510 [drm] [<ffffffffa01cfee0>] ? drm_mode_setplane+0x1b0/0x1b0 [drm] [<ffffffff810f79a7>] ? hrtimer_start_range_ns+0x1b7/0x3a0 [<ffffffff81212962>] do_vfs_ioctl+0x92/0x570 [<ffffffff81590852>] ? __sys_recvmsg+0x42/0x80 [<ffffffff81212eb9>] SyS_ioctl+0x79/0x90 [<ffffffff816b4e32>] entry_SYSCALL_64_fastpath+0x1a/0xa4 RIP [<ffffffffa012b026>] drm_dp_payload_send_msg+0x146/0x1f0 [drm_kms_helper] Which occurs because of the hotplug event shown in the log, which ends up causing DRM's dp helpers to drop the port we're updating the payload on and panic. CC: stable@vger.kernel.org Signed-off-by: Lyude <cpaul@redhat.com> Reviewed-by: David Airlie <airlied@linux.ie> Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-04-04 23:58:47 +00:00
port = drm_dp_get_validated_port_ref(mgr, port);
if (!port)
return -EINVAL;
port_num = port->port_num;
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
mstb = drm_dp_get_validated_mstb_ref(mgr, port->parent);
if (!mstb) {
mstb = drm_dp_get_last_connected_port_and_mstb(mgr, port->parent, &port_num);
drm/dp/mst: Validate port in drm_dp_payload_send_msg() With the joys of things running concurrently, there's always a chance that the port we get passed in drm_dp_payload_send_msg() isn't actually valid anymore. Because of this, we need to make sure we validate the reference to the port before we use it otherwise we risk running into various race conditions. For instance, on the Dell MST monitor I have here for testing, hotplugging it enough times causes us to kernel panic: [drm:intel_mst_enable_dp] 1 [drm:drm_dp_update_payload_part2] payload 0 1 [drm:intel_get_hpd_pins] hotplug event received, stat 0x00200000, dig 0x10101011, pins 0x00000020 [drm:intel_hpd_irq_handler] digital hpd port B - short [drm:intel_dp_hpd_pulse] got hpd irq on port B - short [drm:intel_dp_check_mst_status] got esi 00 10 00 [drm:drm_dp_update_payload_part2] payload 1 1 general protection fault: 0000 [#1] SMP … Call Trace: [<ffffffffa012b632>] drm_dp_update_payload_part2+0xc2/0x130 [drm_kms_helper] [<ffffffffa032ef08>] intel_mst_enable_dp+0xf8/0x180 [i915] [<ffffffffa0310dbd>] haswell_crtc_enable+0x3ed/0x8c0 [i915] [<ffffffffa030c84d>] intel_atomic_commit+0x5ad/0x1590 [i915] [<ffffffffa01db877>] ? drm_atomic_set_crtc_for_connector+0x57/0xe0 [drm] [<ffffffffa01dc4e7>] drm_atomic_commit+0x37/0x60 [drm] [<ffffffffa0130a3a>] drm_atomic_helper_set_config+0x7a/0xb0 [drm_kms_helper] [<ffffffffa01cc482>] drm_mode_set_config_internal+0x62/0x100 [drm] [<ffffffffa01d02ad>] drm_mode_setcrtc+0x3cd/0x4e0 [drm] [<ffffffffa01c18e3>] drm_ioctl+0x143/0x510 [drm] [<ffffffffa01cfee0>] ? drm_mode_setplane+0x1b0/0x1b0 [drm] [<ffffffff810f79a7>] ? hrtimer_start_range_ns+0x1b7/0x3a0 [<ffffffff81212962>] do_vfs_ioctl+0x92/0x570 [<ffffffff81590852>] ? __sys_recvmsg+0x42/0x80 [<ffffffff81212eb9>] SyS_ioctl+0x79/0x90 [<ffffffff816b4e32>] entry_SYSCALL_64_fastpath+0x1a/0xa4 RIP [<ffffffffa012b026>] drm_dp_payload_send_msg+0x146/0x1f0 [drm_kms_helper] Which occurs because of the hotplug event shown in the log, which ends up causing DRM's dp helpers to drop the port we're updating the payload on and panic. CC: stable@vger.kernel.org Signed-off-by: Lyude <cpaul@redhat.com> Reviewed-by: David Airlie <airlied@linux.ie> Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-04-04 23:58:47 +00:00
if (!mstb) {
drm_dp_put_port(port);
return -EINVAL;
drm/dp/mst: Validate port in drm_dp_payload_send_msg() With the joys of things running concurrently, there's always a chance that the port we get passed in drm_dp_payload_send_msg() isn't actually valid anymore. Because of this, we need to make sure we validate the reference to the port before we use it otherwise we risk running into various race conditions. For instance, on the Dell MST monitor I have here for testing, hotplugging it enough times causes us to kernel panic: [drm:intel_mst_enable_dp] 1 [drm:drm_dp_update_payload_part2] payload 0 1 [drm:intel_get_hpd_pins] hotplug event received, stat 0x00200000, dig 0x10101011, pins 0x00000020 [drm:intel_hpd_irq_handler] digital hpd port B - short [drm:intel_dp_hpd_pulse] got hpd irq on port B - short [drm:intel_dp_check_mst_status] got esi 00 10 00 [drm:drm_dp_update_payload_part2] payload 1 1 general protection fault: 0000 [#1] SMP … Call Trace: [<ffffffffa012b632>] drm_dp_update_payload_part2+0xc2/0x130 [drm_kms_helper] [<ffffffffa032ef08>] intel_mst_enable_dp+0xf8/0x180 [i915] [<ffffffffa0310dbd>] haswell_crtc_enable+0x3ed/0x8c0 [i915] [<ffffffffa030c84d>] intel_atomic_commit+0x5ad/0x1590 [i915] [<ffffffffa01db877>] ? drm_atomic_set_crtc_for_connector+0x57/0xe0 [drm] [<ffffffffa01dc4e7>] drm_atomic_commit+0x37/0x60 [drm] [<ffffffffa0130a3a>] drm_atomic_helper_set_config+0x7a/0xb0 [drm_kms_helper] [<ffffffffa01cc482>] drm_mode_set_config_internal+0x62/0x100 [drm] [<ffffffffa01d02ad>] drm_mode_setcrtc+0x3cd/0x4e0 [drm] [<ffffffffa01c18e3>] drm_ioctl+0x143/0x510 [drm] [<ffffffffa01cfee0>] ? drm_mode_setplane+0x1b0/0x1b0 [drm] [<ffffffff810f79a7>] ? hrtimer_start_range_ns+0x1b7/0x3a0 [<ffffffff81212962>] do_vfs_ioctl+0x92/0x570 [<ffffffff81590852>] ? __sys_recvmsg+0x42/0x80 [<ffffffff81212eb9>] SyS_ioctl+0x79/0x90 [<ffffffff816b4e32>] entry_SYSCALL_64_fastpath+0x1a/0xa4 RIP [<ffffffffa012b026>] drm_dp_payload_send_msg+0x146/0x1f0 [drm_kms_helper] Which occurs because of the hotplug event shown in the log, which ends up causing DRM's dp helpers to drop the port we're updating the payload on and panic. CC: stable@vger.kernel.org Signed-off-by: Lyude <cpaul@redhat.com> Reviewed-by: David Airlie <airlied@linux.ie> Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-04-04 23:58:47 +00:00
}
}
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
txmsg = kzalloc(sizeof(*txmsg), GFP_KERNEL);
if (!txmsg) {
ret = -ENOMEM;
goto fail_put;
}
for (i = 0; i < port->num_sdp_streams; i++)
sinks[i] = i;
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
txmsg->dst = mstb;
len = build_allocate_payload(txmsg, port_num,
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
id,
pbn, port->num_sdp_streams, sinks);
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
drm_dp_queue_down_tx(mgr, txmsg);
ret = drm_dp_mst_wait_tx_reply(mstb, txmsg);
if (ret > 0) {
if (txmsg->reply.reply_type == 1) {
ret = -EINVAL;
} else
ret = 0;
}
kfree(txmsg);
fail_put:
drm_dp_put_mst_branch_device(mstb);
drm/dp/mst: Validate port in drm_dp_payload_send_msg() With the joys of things running concurrently, there's always a chance that the port we get passed in drm_dp_payload_send_msg() isn't actually valid anymore. Because of this, we need to make sure we validate the reference to the port before we use it otherwise we risk running into various race conditions. For instance, on the Dell MST monitor I have here for testing, hotplugging it enough times causes us to kernel panic: [drm:intel_mst_enable_dp] 1 [drm:drm_dp_update_payload_part2] payload 0 1 [drm:intel_get_hpd_pins] hotplug event received, stat 0x00200000, dig 0x10101011, pins 0x00000020 [drm:intel_hpd_irq_handler] digital hpd port B - short [drm:intel_dp_hpd_pulse] got hpd irq on port B - short [drm:intel_dp_check_mst_status] got esi 00 10 00 [drm:drm_dp_update_payload_part2] payload 1 1 general protection fault: 0000 [#1] SMP … Call Trace: [<ffffffffa012b632>] drm_dp_update_payload_part2+0xc2/0x130 [drm_kms_helper] [<ffffffffa032ef08>] intel_mst_enable_dp+0xf8/0x180 [i915] [<ffffffffa0310dbd>] haswell_crtc_enable+0x3ed/0x8c0 [i915] [<ffffffffa030c84d>] intel_atomic_commit+0x5ad/0x1590 [i915] [<ffffffffa01db877>] ? drm_atomic_set_crtc_for_connector+0x57/0xe0 [drm] [<ffffffffa01dc4e7>] drm_atomic_commit+0x37/0x60 [drm] [<ffffffffa0130a3a>] drm_atomic_helper_set_config+0x7a/0xb0 [drm_kms_helper] [<ffffffffa01cc482>] drm_mode_set_config_internal+0x62/0x100 [drm] [<ffffffffa01d02ad>] drm_mode_setcrtc+0x3cd/0x4e0 [drm] [<ffffffffa01c18e3>] drm_ioctl+0x143/0x510 [drm] [<ffffffffa01cfee0>] ? drm_mode_setplane+0x1b0/0x1b0 [drm] [<ffffffff810f79a7>] ? hrtimer_start_range_ns+0x1b7/0x3a0 [<ffffffff81212962>] do_vfs_ioctl+0x92/0x570 [<ffffffff81590852>] ? __sys_recvmsg+0x42/0x80 [<ffffffff81212eb9>] SyS_ioctl+0x79/0x90 [<ffffffff816b4e32>] entry_SYSCALL_64_fastpath+0x1a/0xa4 RIP [<ffffffffa012b026>] drm_dp_payload_send_msg+0x146/0x1f0 [drm_kms_helper] Which occurs because of the hotplug event shown in the log, which ends up causing DRM's dp helpers to drop the port we're updating the payload on and panic. CC: stable@vger.kernel.org Signed-off-by: Lyude <cpaul@redhat.com> Reviewed-by: David Airlie <airlied@linux.ie> Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-04-04 23:58:47 +00:00
drm_dp_put_port(port);
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
return ret;
}
static int drm_dp_create_payload_step1(struct drm_dp_mst_topology_mgr *mgr,
int id,
struct drm_dp_payload *payload)
{
int ret;
ret = drm_dp_dpcd_write_payload(mgr, id, payload);
if (ret < 0) {
payload->payload_state = 0;
return ret;
}
payload->payload_state = DP_PAYLOAD_LOCAL;
return 0;
}
static int drm_dp_create_payload_step2(struct drm_dp_mst_topology_mgr *mgr,
struct drm_dp_mst_port *port,
int id,
struct drm_dp_payload *payload)
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
{
int ret;
ret = drm_dp_payload_send_msg(mgr, port, id, port->vcpi.pbn);
if (ret < 0)
return ret;
payload->payload_state = DP_PAYLOAD_REMOTE;
return ret;
}
static int drm_dp_destroy_payload_step1(struct drm_dp_mst_topology_mgr *mgr,
struct drm_dp_mst_port *port,
int id,
struct drm_dp_payload *payload)
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
{
DRM_DEBUG_KMS("\n");
/* its okay for these to fail */
if (port) {
drm_dp_payload_send_msg(mgr, port, id, 0);
}
drm_dp_dpcd_write_payload(mgr, id, payload);
payload->payload_state = DP_PAYLOAD_DELETE_LOCAL;
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
return 0;
}
static int drm_dp_destroy_payload_step2(struct drm_dp_mst_topology_mgr *mgr,
int id,
struct drm_dp_payload *payload)
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
{
payload->payload_state = 0;
return 0;
}
/**
* drm_dp_update_payload_part1() - Execute payload update part 1
* @mgr: manager to use.
*
* This iterates over all proposed virtual channels, and tries to
* allocate space in the link for them. For 0->slots transitions,
* this step just writes the VCPI to the MST device. For slots->0
* transitions, this writes the updated VCPIs and removes the
* remote VC payloads.
*
* after calling this the driver should generate ACT and payload
* packets.
*/
int drm_dp_update_payload_part1(struct drm_dp_mst_topology_mgr *mgr)
{
int i, j;
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
int cur_slots = 1;
struct drm_dp_payload req_payload;
struct drm_dp_mst_port *port;
mutex_lock(&mgr->payload_lock);
for (i = 0; i < mgr->max_payloads; i++) {
/* solve the current payloads - compare to the hw ones
- update the hw view */
req_payload.start_slot = cur_slots;
if (mgr->proposed_vcpis[i]) {
port = container_of(mgr->proposed_vcpis[i], struct drm_dp_mst_port, vcpi);
drm/dp/mst: Get validated port ref in drm_dp_update_payload_part1() We can thank KASAN for finding this, otherwise I probably would have spent hours on it. This fixes a somewhat harder to trigger kernel panic, occuring while enabling MST where the port we were currently updating the payload on would have all of it's refs dropped before we finished what we were doing: ================================================================== BUG: KASAN: use-after-free in drm_dp_update_payload_part1+0xb3f/0xdb0 [drm_kms_helper] at addr ffff8800d29de018 Read of size 4 by task Xorg/973 ============================================================================= BUG kmalloc-2048 (Tainted: G B W ): kasan: bad access detected ----------------------------------------------------------------------------- INFO: Allocated in drm_dp_add_port+0x1aa/0x1ed0 [drm_kms_helper] age=16477 cpu=0 pid=2175 ___slab_alloc+0x472/0x490 __slab_alloc+0x20/0x40 kmem_cache_alloc_trace+0x151/0x190 drm_dp_add_port+0x1aa/0x1ed0 [drm_kms_helper] drm_dp_send_link_address+0x526/0x960 [drm_kms_helper] drm_dp_check_and_send_link_address+0x1ac/0x210 [drm_kms_helper] drm_dp_mst_link_probe_work+0x77/0xd0 [drm_kms_helper] process_one_work+0x562/0x1350 worker_thread+0xd9/0x1390 kthread+0x1c5/0x260 ret_from_fork+0x22/0x40 INFO: Freed in drm_dp_free_mst_port+0x50/0x60 [drm_kms_helper] age=7521 cpu=0 pid=2175 __slab_free+0x17f/0x2d0 kfree+0x169/0x180 drm_dp_free_mst_port+0x50/0x60 [drm_kms_helper] drm_dp_destroy_connector_work+0x2b8/0x490 [drm_kms_helper] process_one_work+0x562/0x1350 worker_thread+0xd9/0x1390 kthread+0x1c5/0x260 ret_from_fork+0x22/0x40 which on this T460s, would eventually lead to kernel panics in somewhat random places later in intel_mst_enable_dp() if we got lucky enough. Signed-off-by: Lyude <cpaul@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-04-22 20:08:46 +00:00
port = drm_dp_get_validated_port_ref(mgr, port);
if (!port) {
mutex_unlock(&mgr->payload_lock);
return -EINVAL;
}
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
req_payload.num_slots = mgr->proposed_vcpis[i]->num_slots;
req_payload.vcpi = mgr->proposed_vcpis[i]->vcpi;
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
} else {
port = NULL;
req_payload.num_slots = 0;
}
if (mgr->payloads[i].start_slot != req_payload.start_slot) {
mgr->payloads[i].start_slot = req_payload.start_slot;
}
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
/* work out what is required to happen with this payload */
if (mgr->payloads[i].num_slots != req_payload.num_slots) {
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
/* need to push an update for this payload */
if (req_payload.num_slots) {
drm_dp_create_payload_step1(mgr, mgr->proposed_vcpis[i]->vcpi, &req_payload);
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
mgr->payloads[i].num_slots = req_payload.num_slots;
mgr->payloads[i].vcpi = req_payload.vcpi;
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
} else if (mgr->payloads[i].num_slots) {
mgr->payloads[i].num_slots = 0;
drm_dp_destroy_payload_step1(mgr, port, port->vcpi.vcpi, &mgr->payloads[i]);
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
req_payload.payload_state = mgr->payloads[i].payload_state;
mgr->payloads[i].start_slot = 0;
}
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
mgr->payloads[i].payload_state = req_payload.payload_state;
}
cur_slots += req_payload.num_slots;
drm/dp/mst: Get validated port ref in drm_dp_update_payload_part1() We can thank KASAN for finding this, otherwise I probably would have spent hours on it. This fixes a somewhat harder to trigger kernel panic, occuring while enabling MST where the port we were currently updating the payload on would have all of it's refs dropped before we finished what we were doing: ================================================================== BUG: KASAN: use-after-free in drm_dp_update_payload_part1+0xb3f/0xdb0 [drm_kms_helper] at addr ffff8800d29de018 Read of size 4 by task Xorg/973 ============================================================================= BUG kmalloc-2048 (Tainted: G B W ): kasan: bad access detected ----------------------------------------------------------------------------- INFO: Allocated in drm_dp_add_port+0x1aa/0x1ed0 [drm_kms_helper] age=16477 cpu=0 pid=2175 ___slab_alloc+0x472/0x490 __slab_alloc+0x20/0x40 kmem_cache_alloc_trace+0x151/0x190 drm_dp_add_port+0x1aa/0x1ed0 [drm_kms_helper] drm_dp_send_link_address+0x526/0x960 [drm_kms_helper] drm_dp_check_and_send_link_address+0x1ac/0x210 [drm_kms_helper] drm_dp_mst_link_probe_work+0x77/0xd0 [drm_kms_helper] process_one_work+0x562/0x1350 worker_thread+0xd9/0x1390 kthread+0x1c5/0x260 ret_from_fork+0x22/0x40 INFO: Freed in drm_dp_free_mst_port+0x50/0x60 [drm_kms_helper] age=7521 cpu=0 pid=2175 __slab_free+0x17f/0x2d0 kfree+0x169/0x180 drm_dp_free_mst_port+0x50/0x60 [drm_kms_helper] drm_dp_destroy_connector_work+0x2b8/0x490 [drm_kms_helper] process_one_work+0x562/0x1350 worker_thread+0xd9/0x1390 kthread+0x1c5/0x260 ret_from_fork+0x22/0x40 which on this T460s, would eventually lead to kernel panics in somewhat random places later in intel_mst_enable_dp() if we got lucky enough. Signed-off-by: Lyude <cpaul@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-04-22 20:08:46 +00:00
if (port)
drm_dp_put_port(port);
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
}
for (i = 0; i < mgr->max_payloads; i++) {
if (mgr->payloads[i].payload_state == DP_PAYLOAD_DELETE_LOCAL) {
DRM_DEBUG_KMS("removing payload %d\n", i);
for (j = i; j < mgr->max_payloads - 1; j++) {
memcpy(&mgr->payloads[j], &mgr->payloads[j + 1], sizeof(struct drm_dp_payload));
mgr->proposed_vcpis[j] = mgr->proposed_vcpis[j + 1];
if (mgr->proposed_vcpis[j] && mgr->proposed_vcpis[j]->num_slots) {
set_bit(j + 1, &mgr->payload_mask);
} else {
clear_bit(j + 1, &mgr->payload_mask);
}
}
memset(&mgr->payloads[mgr->max_payloads - 1], 0, sizeof(struct drm_dp_payload));
mgr->proposed_vcpis[mgr->max_payloads - 1] = NULL;
clear_bit(mgr->max_payloads, &mgr->payload_mask);
}
}
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
mutex_unlock(&mgr->payload_lock);
return 0;
}
EXPORT_SYMBOL(drm_dp_update_payload_part1);
/**
* drm_dp_update_payload_part2() - Execute payload update part 2
* @mgr: manager to use.
*
* This iterates over all proposed virtual channels, and tries to
* allocate space in the link for them. For 0->slots transitions,
* this step writes the remote VC payload commands. For slots->0
* this just resets some internal state.
*/
int drm_dp_update_payload_part2(struct drm_dp_mst_topology_mgr *mgr)
{
struct drm_dp_mst_port *port;
int i;
int ret = 0;
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
mutex_lock(&mgr->payload_lock);
for (i = 0; i < mgr->max_payloads; i++) {
if (!mgr->proposed_vcpis[i])
continue;
port = container_of(mgr->proposed_vcpis[i], struct drm_dp_mst_port, vcpi);
DRM_DEBUG_KMS("payload %d %d\n", i, mgr->payloads[i].payload_state);
if (mgr->payloads[i].payload_state == DP_PAYLOAD_LOCAL) {
ret = drm_dp_create_payload_step2(mgr, port, mgr->proposed_vcpis[i]->vcpi, &mgr->payloads[i]);
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
} else if (mgr->payloads[i].payload_state == DP_PAYLOAD_DELETE_LOCAL) {
ret = drm_dp_destroy_payload_step2(mgr, mgr->proposed_vcpis[i]->vcpi, &mgr->payloads[i]);
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
}
if (ret) {
mutex_unlock(&mgr->payload_lock);
return ret;
}
}
mutex_unlock(&mgr->payload_lock);
return 0;
}
EXPORT_SYMBOL(drm_dp_update_payload_part2);
#if 0 /* unused as of yet */
static int drm_dp_send_dpcd_read(struct drm_dp_mst_topology_mgr *mgr,
struct drm_dp_mst_port *port,
int offset, int size)
{
int len;
struct drm_dp_sideband_msg_tx *txmsg;
txmsg = kzalloc(sizeof(*txmsg), GFP_KERNEL);
if (!txmsg)
return -ENOMEM;
len = build_dpcd_read(txmsg, port->port_num, 0, 8);
txmsg->dst = port->parent;
drm_dp_queue_down_tx(mgr, txmsg);
return 0;
}
#endif
static int drm_dp_send_dpcd_write(struct drm_dp_mst_topology_mgr *mgr,
struct drm_dp_mst_port *port,
int offset, int size, u8 *bytes)
{
int len;
int ret;
struct drm_dp_sideband_msg_tx *txmsg;
struct drm_dp_mst_branch *mstb;
mstb = drm_dp_get_validated_mstb_ref(mgr, port->parent);
if (!mstb)
return -EINVAL;
txmsg = kzalloc(sizeof(*txmsg), GFP_KERNEL);
if (!txmsg) {
ret = -ENOMEM;
goto fail_put;
}
len = build_dpcd_write(txmsg, port->port_num, offset, size, bytes);
txmsg->dst = mstb;
drm_dp_queue_down_tx(mgr, txmsg);
ret = drm_dp_mst_wait_tx_reply(mstb, txmsg);
if (ret > 0) {
if (txmsg->reply.reply_type == 1) {
ret = -EINVAL;
} else
ret = 0;
}
kfree(txmsg);
fail_put:
drm_dp_put_mst_branch_device(mstb);
return ret;
}
static int drm_dp_encode_up_ack_reply(struct drm_dp_sideband_msg_tx *msg, u8 req_type)
{
struct drm_dp_sideband_msg_reply_body reply;
reply.reply_type = 0;
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
reply.req_type = req_type;
drm_dp_encode_sideband_reply(&reply, msg);
return 0;
}
static int drm_dp_send_up_ack_reply(struct drm_dp_mst_topology_mgr *mgr,
struct drm_dp_mst_branch *mstb,
int req_type, int seqno, bool broadcast)
{
struct drm_dp_sideband_msg_tx *txmsg;
txmsg = kzalloc(sizeof(*txmsg), GFP_KERNEL);
if (!txmsg)
return -ENOMEM;
txmsg->dst = mstb;
txmsg->seqno = seqno;
drm_dp_encode_up_ack_reply(txmsg, req_type);
mutex_lock(&mgr->qlock);
process_single_up_tx_qlock(mgr, txmsg);
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
mutex_unlock(&mgr->qlock);
kfree(txmsg);
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
return 0;
}
static bool drm_dp_get_vc_payload_bw(int dp_link_bw,
int dp_link_count,
int *out)
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
{
switch (dp_link_bw) {
default:
DRM_DEBUG_KMS("invalid link bandwidth in DPCD: %x (link count: %d)\n",
dp_link_bw, dp_link_count);
return false;
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
case DP_LINK_BW_1_62:
*out = 3 * dp_link_count;
break;
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
case DP_LINK_BW_2_7:
*out = 5 * dp_link_count;
break;
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
case DP_LINK_BW_5_4:
*out = 10 * dp_link_count;
break;
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
}
return true;
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
}
/**
* drm_dp_mst_topology_mgr_set_mst() - Set the MST state for a topology manager
* @mgr: manager to set state for
* @mst_state: true to enable MST on this connector - false to disable.
*
* This is called by the driver when it detects an MST capable device plugged
* into a DP MST capable port, or when a DP MST capable device is unplugged.
*/
int drm_dp_mst_topology_mgr_set_mst(struct drm_dp_mst_topology_mgr *mgr, bool mst_state)
{
int ret = 0;
struct drm_dp_mst_branch *mstb = NULL;
mutex_lock(&mgr->lock);
if (mst_state == mgr->mst_state)
goto out_unlock;
mgr->mst_state = mst_state;
/* set the device into MST mode */
if (mst_state) {
WARN_ON(mgr->mst_primary);
/* get dpcd info */
ret = drm_dp_dpcd_read(mgr->aux, DP_DPCD_REV, mgr->dpcd, DP_RECEIVER_CAP_SIZE);
if (ret != DP_RECEIVER_CAP_SIZE) {
DRM_DEBUG_KMS("failed to read DPCD\n");
goto out_unlock;
}
if (!drm_dp_get_vc_payload_bw(mgr->dpcd[1],
mgr->dpcd[2] & DP_MAX_LANE_COUNT_MASK,
&mgr->pbn_div)) {
ret = -EINVAL;
goto out_unlock;
}
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
mgr->total_pbn = 2560;
mgr->total_slots = DIV_ROUND_UP(mgr->total_pbn, mgr->pbn_div);
mgr->avail_slots = mgr->total_slots;
/* add initial branch device at LCT 1 */
mstb = drm_dp_add_mst_branch_device(1, NULL);
if (mstb == NULL) {
ret = -ENOMEM;
goto out_unlock;
}
mstb->mgr = mgr;
/* give this the main reference */
mgr->mst_primary = mstb;
kref_get(&mgr->mst_primary->kref);
ret = drm_dp_dpcd_writeb(mgr->aux, DP_MSTM_CTRL,
DP_MST_EN | DP_UP_REQ_EN | DP_UPSTREAM_IS_SRC);
if (ret < 0) {
goto out_unlock;
}
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
{
struct drm_dp_payload reset_pay;
reset_pay.start_slot = 0;
reset_pay.num_slots = 0x3f;
drm_dp_dpcd_write_payload(mgr, 0, &reset_pay);
}
queue_work(system_long_wq, &mgr->work);
ret = 0;
} else {
/* disable MST on the device */
mstb = mgr->mst_primary;
mgr->mst_primary = NULL;
/* this can fail if the device is gone */
drm_dp_dpcd_writeb(mgr->aux, DP_MSTM_CTRL, 0);
ret = 0;
memset(mgr->payloads, 0, mgr->max_payloads * sizeof(struct drm_dp_payload));
mgr->payload_mask = 0;
set_bit(0, &mgr->payload_mask);
mgr->vcpi_mask = 0;
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
}
out_unlock:
mutex_unlock(&mgr->lock);
if (mstb)
drm_dp_put_mst_branch_device(mstb);
return ret;
}
EXPORT_SYMBOL(drm_dp_mst_topology_mgr_set_mst);
/**
* drm_dp_mst_topology_mgr_suspend() - suspend the MST manager
* @mgr: manager to suspend
*
* This function tells the MST device that we can't handle UP messages
* anymore. This should stop it from sending any since we are suspended.
*/
void drm_dp_mst_topology_mgr_suspend(struct drm_dp_mst_topology_mgr *mgr)
{
mutex_lock(&mgr->lock);
drm_dp_dpcd_writeb(mgr->aux, DP_MSTM_CTRL,
DP_MST_EN | DP_UPSTREAM_IS_SRC);
mutex_unlock(&mgr->lock);
drm/dp/mst: drop cancel work sync in the mstb destroy path (v2) Since 9eb1e57f564d4e6e10991402726cc83fe0b9172f drm/dp/mst: make sure mst_primary mstb is valid in work function we validate the mstb structs in the work function, and doing that takes a reference. So we should never get here with the work function running using the mstb device, only if the work function hasn't run yet or is running for another mstb. So we don't need to sync the work here, this was causing lockdep spew as below. [ +0.000160] ============================================= [ +0.000001] [ INFO: possible recursive locking detected ] [ +0.000002] 3.10.0-320.el7.rhel72.stable.backport.3.x86_64.debug #1 Tainted: G W ------------ [ +0.000001] --------------------------------------------- [ +0.000001] kworker/4:2/1262 is trying to acquire lock: [ +0.000001] ((&mgr->work)){+.+.+.}, at: [<ffffffff810b29a5>] flush_work+0x5/0x2e0 [ +0.000007] but task is already holding lock: [ +0.000001] ((&mgr->work)){+.+.+.}, at: [<ffffffff810b57e4>] process_one_work+0x1b4/0x710 [ +0.000004] other info that might help us debug this: [ +0.000001] Possible unsafe locking scenario: [ +0.000002] CPU0 [ +0.000000] ---- [ +0.000001] lock((&mgr->work)); [ +0.000002] lock((&mgr->work)); [ +0.000001] *** DEADLOCK *** [ +0.000001] May be due to missing lock nesting notation [ +0.000002] 2 locks held by kworker/4:2/1262: [ +0.000001] #0: (events_long){.+.+.+}, at: [<ffffffff810b57e4>] process_one_work+0x1b4/0x710 [ +0.000004] #1: ((&mgr->work)){+.+.+.}, at: [<ffffffff810b57e4>] process_one_work+0x1b4/0x710 [ +0.000003] stack backtrace: [ +0.000003] CPU: 4 PID: 1262 Comm: kworker/4:2 Tainted: G W ------------ 3.10.0-320.el7.rhel72.stable.backport.3.x86_64.debug #1 [ +0.000001] Hardware name: LENOVO 20EGS0R600/20EGS0R600, BIOS GNET71WW (2.19 ) 02/05/2015 [ +0.000008] Workqueue: events_long drm_dp_mst_link_probe_work [drm_kms_helper] [ +0.000001] ffffffff82c26c90 00000000a527b914 ffff88046399bae8 ffffffff816fe04d [ +0.000004] ffff88046399bb58 ffffffff8110f47f ffff880461438000 0001009b840fc003 [ +0.000002] ffff880461438a98 0000000000000000 0000000804dc26e1 ffffffff824a2c00 [ +0.000003] Call Trace: [ +0.000004] [<ffffffff816fe04d>] dump_stack+0x19/0x1b [ +0.000004] [<ffffffff8110f47f>] __lock_acquire+0x115f/0x1250 [ +0.000002] [<ffffffff8110fd49>] lock_acquire+0x99/0x1e0 [ +0.000002] [<ffffffff810b29a5>] ? flush_work+0x5/0x2e0 [ +0.000002] [<ffffffff810b29ee>] flush_work+0x4e/0x2e0 [ +0.000002] [<ffffffff810b29a5>] ? flush_work+0x5/0x2e0 [ +0.000004] [<ffffffff81025905>] ? native_sched_clock+0x35/0x80 [ +0.000002] [<ffffffff81025959>] ? sched_clock+0x9/0x10 [ +0.000002] [<ffffffff810da1f5>] ? local_clock+0x25/0x30 [ +0.000002] [<ffffffff8110dca9>] ? mark_held_locks+0xb9/0x140 [ +0.000003] [<ffffffff810b4ed5>] ? __cancel_work_timer+0x95/0x160 [ +0.000002] [<ffffffff810b4ee8>] __cancel_work_timer+0xa8/0x160 [ +0.000002] [<ffffffff810b4fb0>] cancel_work_sync+0x10/0x20 [ +0.000007] [<ffffffffa0160d17>] drm_dp_destroy_mst_branch_device+0x27/0x120 [drm_kms_helper] [ +0.000006] [<ffffffffa0163968>] drm_dp_mst_link_probe_work+0x78/0xa0 [drm_kms_helper] [ +0.000002] [<ffffffff810b5850>] process_one_work+0x220/0x710 [ +0.000002] [<ffffffff810b57e4>] ? process_one_work+0x1b4/0x710 [ +0.000005] [<ffffffff810b5e5b>] worker_thread+0x11b/0x3a0 [ +0.000003] [<ffffffff810b5d40>] ? process_one_work+0x710/0x710 [ +0.000002] [<ffffffff810beced>] kthread+0xed/0x100 [ +0.000003] [<ffffffff810bec00>] ? insert_kthread_work+0x80/0x80 [ +0.000003] [<ffffffff817121d8>] ret_from_fork+0x58/0x90 v2: add flush_work. Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2015-09-30 00:39:42 +00:00
flush_work(&mgr->work);
flush_work(&mgr->destroy_connector_work);
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
}
EXPORT_SYMBOL(drm_dp_mst_topology_mgr_suspend);
/**
* drm_dp_mst_topology_mgr_resume() - resume the MST manager
* @mgr: manager to resume
*
* This will fetch DPCD and see if the device is still there,
* if it is, it will rewrite the MSTM control bits, and return.
*
* if the device fails this returns -1, and the driver should do
* a full MST reprobe, in case we were undocked.
*/
int drm_dp_mst_topology_mgr_resume(struct drm_dp_mst_topology_mgr *mgr)
{
int ret = 0;
mutex_lock(&mgr->lock);
if (mgr->mst_primary) {
int sret;
u8 guid[16];
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
sret = drm_dp_dpcd_read(mgr->aux, DP_DPCD_REV, mgr->dpcd, DP_RECEIVER_CAP_SIZE);
if (sret != DP_RECEIVER_CAP_SIZE) {
DRM_DEBUG_KMS("dpcd read failed - undocked during suspend?\n");
ret = -1;
goto out_unlock;
}
ret = drm_dp_dpcd_writeb(mgr->aux, DP_MSTM_CTRL,
DP_MST_EN | DP_UP_REQ_EN | DP_UPSTREAM_IS_SRC);
if (ret < 0) {
DRM_DEBUG_KMS("mst write failed - undocked during suspend?\n");
ret = -1;
goto out_unlock;
}
/* Some hubs forget their guids after they resume */
sret = drm_dp_dpcd_read(mgr->aux, DP_GUID, guid, 16);
if (sret != 16) {
DRM_DEBUG_KMS("dpcd read failed - undocked during suspend?\n");
ret = -1;
goto out_unlock;
}
drm_dp_check_mstb_guid(mgr->mst_primary, guid);
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
ret = 0;
} else
ret = -1;
out_unlock:
mutex_unlock(&mgr->lock);
return ret;
}
EXPORT_SYMBOL(drm_dp_mst_topology_mgr_resume);
static void drm_dp_get_one_sb_msg(struct drm_dp_mst_topology_mgr *mgr, bool up)
{
int len;
u8 replyblock[32];
int replylen, origlen, curreply;
int ret;
struct drm_dp_sideband_msg_rx *msg;
int basereg = up ? DP_SIDEBAND_MSG_UP_REQ_BASE : DP_SIDEBAND_MSG_DOWN_REP_BASE;
msg = up ? &mgr->up_req_recv : &mgr->down_rep_recv;
len = min(mgr->max_dpcd_transaction_bytes, 16);
ret = drm_dp_dpcd_read(mgr->aux, basereg,
replyblock, len);
if (ret != len) {
DRM_DEBUG_KMS("failed to read DPCD down rep %d %d\n", len, ret);
return;
}
ret = drm_dp_sideband_msg_build(msg, replyblock, len, true);
if (!ret) {
DRM_DEBUG_KMS("sideband msg build failed %d\n", replyblock[0]);
return;
}
replylen = msg->curchunk_len + msg->curchunk_hdrlen;
origlen = replylen;
replylen -= len;
curreply = len;
while (replylen > 0) {
len = min3(replylen, mgr->max_dpcd_transaction_bytes, 16);
ret = drm_dp_dpcd_read(mgr->aux, basereg + curreply,
replyblock, len);
if (ret != len) {
DRM_DEBUG_KMS("failed to read a chunk\n");
}
ret = drm_dp_sideband_msg_build(msg, replyblock, len, false);
if (ret == false)
DRM_DEBUG_KMS("failed to build sideband msg\n");
curreply += len;
replylen -= len;
}
}
static int drm_dp_mst_handle_down_rep(struct drm_dp_mst_topology_mgr *mgr)
{
int ret = 0;
drm_dp_get_one_sb_msg(mgr, false);
if (mgr->down_rep_recv.have_eomt) {
struct drm_dp_sideband_msg_tx *txmsg;
struct drm_dp_mst_branch *mstb;
int slot = -1;
mstb = drm_dp_get_mst_branch_device(mgr,
mgr->down_rep_recv.initial_hdr.lct,
mgr->down_rep_recv.initial_hdr.rad);
if (!mstb) {
DRM_DEBUG_KMS("Got MST reply from unknown device %d\n", mgr->down_rep_recv.initial_hdr.lct);
memset(&mgr->down_rep_recv, 0, sizeof(struct drm_dp_sideband_msg_rx));
return 0;
}
/* find the message */
slot = mgr->down_rep_recv.initial_hdr.seqno;
mutex_lock(&mgr->qlock);
txmsg = mstb->tx_slots[slot];
/* remove from slots */
mutex_unlock(&mgr->qlock);
if (!txmsg) {
DRM_DEBUG_KMS("Got MST reply with no msg %p %d %d %02x %02x\n",
mstb,
mgr->down_rep_recv.initial_hdr.seqno,
mgr->down_rep_recv.initial_hdr.lct,
mgr->down_rep_recv.initial_hdr.rad[0],
mgr->down_rep_recv.msg[0]);
drm_dp_put_mst_branch_device(mstb);
memset(&mgr->down_rep_recv, 0, sizeof(struct drm_dp_sideband_msg_rx));
return 0;
}
drm_dp_sideband_parse_reply(&mgr->down_rep_recv, &txmsg->reply);
if (txmsg->reply.reply_type == 1) {
DRM_DEBUG_KMS("Got NAK reply: req 0x%02x, reason 0x%02x, nak data 0x%02x\n", txmsg->reply.req_type, txmsg->reply.u.nak.reason, txmsg->reply.u.nak.nak_data);
}
memset(&mgr->down_rep_recv, 0, sizeof(struct drm_dp_sideband_msg_rx));
drm_dp_put_mst_branch_device(mstb);
mutex_lock(&mgr->qlock);
txmsg->state = DRM_DP_SIDEBAND_TX_RX;
mstb->tx_slots[slot] = NULL;
mutex_unlock(&mgr->qlock);
wake_up(&mgr->tx_waitq);
}
return ret;
}
static int drm_dp_mst_handle_up_req(struct drm_dp_mst_topology_mgr *mgr)
{
int ret = 0;
drm_dp_get_one_sb_msg(mgr, true);
if (mgr->up_req_recv.have_eomt) {
struct drm_dp_sideband_msg_req_body msg;
struct drm_dp_mst_branch *mstb = NULL;
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
bool seqno;
if (!mgr->up_req_recv.initial_hdr.broadcast) {
mstb = drm_dp_get_mst_branch_device(mgr,
mgr->up_req_recv.initial_hdr.lct,
mgr->up_req_recv.initial_hdr.rad);
if (!mstb) {
DRM_DEBUG_KMS("Got MST reply from unknown device %d\n", mgr->up_req_recv.initial_hdr.lct);
memset(&mgr->up_req_recv, 0, sizeof(struct drm_dp_sideband_msg_rx));
return 0;
}
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
}
seqno = mgr->up_req_recv.initial_hdr.seqno;
drm_dp_sideband_parse_req(&mgr->up_req_recv, &msg);
if (msg.req_type == DP_CONNECTION_STATUS_NOTIFY) {
drm_dp_send_up_ack_reply(mgr, mgr->mst_primary, msg.req_type, seqno, false);
if (!mstb)
mstb = drm_dp_get_mst_branch_device_by_guid(mgr, msg.u.conn_stat.guid);
if (!mstb) {
DRM_DEBUG_KMS("Got MST reply from unknown device %d\n", mgr->up_req_recv.initial_hdr.lct);
memset(&mgr->up_req_recv, 0, sizeof(struct drm_dp_sideband_msg_rx));
return 0;
}
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
drm_dp_update_port(mstb, &msg.u.conn_stat);
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
DRM_DEBUG_KMS("Got CSN: pn: %d ldps:%d ddps: %d mcs: %d ip: %d pdt: %d\n", msg.u.conn_stat.port_number, msg.u.conn_stat.legacy_device_plug_status, msg.u.conn_stat.displayport_device_plug_status, msg.u.conn_stat.message_capability_status, msg.u.conn_stat.input_port, msg.u.conn_stat.peer_device_type);
(*mgr->cbs->hotplug)(mgr);
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
} else if (msg.req_type == DP_RESOURCE_STATUS_NOTIFY) {
drm_dp_send_up_ack_reply(mgr, mgr->mst_primary, msg.req_type, seqno, false);
if (!mstb)
mstb = drm_dp_get_mst_branch_device_by_guid(mgr, msg.u.resource_stat.guid);
if (!mstb) {
DRM_DEBUG_KMS("Got MST reply from unknown device %d\n", mgr->up_req_recv.initial_hdr.lct);
memset(&mgr->up_req_recv, 0, sizeof(struct drm_dp_sideband_msg_rx));
return 0;
}
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
DRM_DEBUG_KMS("Got RSN: pn: %d avail_pbn %d\n", msg.u.resource_stat.port_number, msg.u.resource_stat.available_pbn);
}
drm_dp_put_mst_branch_device(mstb);
memset(&mgr->up_req_recv, 0, sizeof(struct drm_dp_sideband_msg_rx));
}
return ret;
}
/**
* drm_dp_mst_hpd_irq() - MST hotplug IRQ notify
* @mgr: manager to notify irq for.
* @esi: 4 bytes from SINK_COUNT_ESI
* @handled: whether the hpd interrupt was consumed or not
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
*
* This should be called from the driver when it detects a short IRQ,
* along with the value of the DEVICE_SERVICE_IRQ_VECTOR_ESI0. The
* topology manager will process the sideband messages received as a result
* of this.
*/
int drm_dp_mst_hpd_irq(struct drm_dp_mst_topology_mgr *mgr, u8 *esi, bool *handled)
{
int ret = 0;
int sc;
*handled = false;
sc = esi[0] & 0x3f;
if (sc != mgr->sink_count) {
mgr->sink_count = sc;
*handled = true;
}
if (esi[1] & DP_DOWN_REP_MSG_RDY) {
ret = drm_dp_mst_handle_down_rep(mgr);
*handled = true;
}
if (esi[1] & DP_UP_REQ_MSG_RDY) {
ret |= drm_dp_mst_handle_up_req(mgr);
*handled = true;
}
drm_dp_mst_kick_tx(mgr);
return ret;
}
EXPORT_SYMBOL(drm_dp_mst_hpd_irq);
/**
* drm_dp_mst_detect_port() - get connection status for an MST port
* @mgr: manager for this port
* @port: unverified pointer to a port
*
* This returns the current connection state for a port. It validates the
* port pointer still exists so the caller doesn't require a reference
*/
enum drm_connector_status drm_dp_mst_detect_port(struct drm_connector *connector,
struct drm_dp_mst_topology_mgr *mgr, struct drm_dp_mst_port *port)
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
{
enum drm_connector_status status = connector_status_disconnected;
/* we need to search for the port in the mgr in case its gone */
port = drm_dp_get_validated_port_ref(mgr, port);
if (!port)
return connector_status_disconnected;
if (!port->ddps)
goto out;
switch (port->pdt) {
case DP_PEER_DEVICE_NONE:
case DP_PEER_DEVICE_MST_BRANCHING:
break;
case DP_PEER_DEVICE_SST_SINK:
status = connector_status_connected;
/* for logical ports - cache the EDID */
if (port->port_num >= 8 && !port->cached_edid) {
port->cached_edid = drm_get_edid(connector, &port->aux.ddc);
}
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
break;
case DP_PEER_DEVICE_DP_LEGACY_CONV:
if (port->ldps)
status = connector_status_connected;
break;
}
out:
drm_dp_put_port(port);
return status;
}
EXPORT_SYMBOL(drm_dp_mst_detect_port);
/**
* drm_dp_mst_port_has_audio() - Check whether port has audio capability or not
* @mgr: manager for this port
* @port: unverified pointer to a port.
*
* This returns whether the port supports audio or not.
*/
bool drm_dp_mst_port_has_audio(struct drm_dp_mst_topology_mgr *mgr,
struct drm_dp_mst_port *port)
{
bool ret = false;
port = drm_dp_get_validated_port_ref(mgr, port);
if (!port)
return ret;
ret = port->has_audio;
drm_dp_put_port(port);
return ret;
}
EXPORT_SYMBOL(drm_dp_mst_port_has_audio);
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
/**
* drm_dp_mst_get_edid() - get EDID for an MST port
* @connector: toplevel connector to get EDID for
* @mgr: manager for this port
* @port: unverified pointer to a port.
*
* This returns an EDID for the port connected to a connector,
* It validates the pointer still exists so the caller doesn't require a
* reference.
*/
struct edid *drm_dp_mst_get_edid(struct drm_connector *connector, struct drm_dp_mst_topology_mgr *mgr, struct drm_dp_mst_port *port)
{
struct edid *edid = NULL;
/* we need to search for the port in the mgr in case its gone */
port = drm_dp_get_validated_port_ref(mgr, port);
if (!port)
return NULL;
if (port->cached_edid)
edid = drm_edid_duplicate(port->cached_edid);
else {
edid = drm_get_edid(connector, &port->aux.ddc);
drm_mode_connector_set_tile_property(connector);
}
port->has_audio = drm_detect_monitor_audio(edid);
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
drm_dp_put_port(port);
return edid;
}
EXPORT_SYMBOL(drm_dp_mst_get_edid);
/**
* drm_dp_find_vcpi_slots() - find slots for this PBN value
* @mgr: manager to use
* @pbn: payload bandwidth to convert into slots.
*/
int drm_dp_find_vcpi_slots(struct drm_dp_mst_topology_mgr *mgr,
int pbn)
{
int num_slots;
num_slots = DIV_ROUND_UP(pbn, mgr->pbn_div);
if (num_slots > mgr->avail_slots)
return -ENOSPC;
return num_slots;
}
EXPORT_SYMBOL(drm_dp_find_vcpi_slots);
static int drm_dp_init_vcpi(struct drm_dp_mst_topology_mgr *mgr,
struct drm_dp_vcpi *vcpi, int pbn)
{
int num_slots;
int ret;
num_slots = DIV_ROUND_UP(pbn, mgr->pbn_div);
if (num_slots > mgr->avail_slots)
return -ENOSPC;
vcpi->pbn = pbn;
vcpi->aligned_pbn = num_slots * mgr->pbn_div;
vcpi->num_slots = num_slots;
ret = drm_dp_mst_assign_payload_id(mgr, vcpi);
if (ret < 0)
return ret;
return 0;
}
/**
* drm_dp_mst_allocate_vcpi() - Allocate a virtual channel
* @mgr: manager for this port
* @port: port to allocate a virtual channel for.
* @pbn: payload bandwidth number to request
* @slots: returned number of slots for this PBN.
*/
bool drm_dp_mst_allocate_vcpi(struct drm_dp_mst_topology_mgr *mgr, struct drm_dp_mst_port *port, int pbn, int *slots)
{
int ret;
port = drm_dp_get_validated_port_ref(mgr, port);
if (!port)
return false;
if (port->vcpi.vcpi > 0) {
DRM_DEBUG_KMS("payload: vcpi %d already allocated for pbn %d - requested pbn %d\n", port->vcpi.vcpi, port->vcpi.pbn, pbn);
if (pbn == port->vcpi.pbn) {
*slots = port->vcpi.num_slots;
drm_dp_put_port(port);
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
return true;
}
}
ret = drm_dp_init_vcpi(mgr, &port->vcpi, pbn);
if (ret) {
DRM_DEBUG_KMS("failed to init vcpi %d %d %d\n", DIV_ROUND_UP(pbn, mgr->pbn_div), mgr->avail_slots, ret);
goto out;
}
DRM_DEBUG_KMS("initing vcpi for %d %d\n", pbn, port->vcpi.num_slots);
*slots = port->vcpi.num_slots;
drm_dp_put_port(port);
return true;
out:
return false;
}
EXPORT_SYMBOL(drm_dp_mst_allocate_vcpi);
int drm_dp_mst_get_vcpi_slots(struct drm_dp_mst_topology_mgr *mgr, struct drm_dp_mst_port *port)
{
int slots = 0;
port = drm_dp_get_validated_port_ref(mgr, port);
if (!port)
return slots;
slots = port->vcpi.num_slots;
drm_dp_put_port(port);
return slots;
}
EXPORT_SYMBOL(drm_dp_mst_get_vcpi_slots);
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
/**
* drm_dp_mst_reset_vcpi_slots() - Reset number of slots to 0 for VCPI
* @mgr: manager for this port
* @port: unverified pointer to a port.
*
* This just resets the number of slots for the ports VCPI for later programming.
*/
void drm_dp_mst_reset_vcpi_slots(struct drm_dp_mst_topology_mgr *mgr, struct drm_dp_mst_port *port)
{
port = drm_dp_get_validated_port_ref(mgr, port);
if (!port)
return;
port->vcpi.num_slots = 0;
drm_dp_put_port(port);
}
EXPORT_SYMBOL(drm_dp_mst_reset_vcpi_slots);
/**
* drm_dp_mst_deallocate_vcpi() - deallocate a VCPI
* @mgr: manager for this port
* @port: unverified port to deallocate vcpi for
*/
void drm_dp_mst_deallocate_vcpi(struct drm_dp_mst_topology_mgr *mgr, struct drm_dp_mst_port *port)
{
port = drm_dp_get_validated_port_ref(mgr, port);
if (!port)
return;
drm_dp_mst_put_payload_id(mgr, port->vcpi.vcpi);
port->vcpi.num_slots = 0;
port->vcpi.pbn = 0;
port->vcpi.aligned_pbn = 0;
port->vcpi.vcpi = 0;
drm_dp_put_port(port);
}
EXPORT_SYMBOL(drm_dp_mst_deallocate_vcpi);
static int drm_dp_dpcd_write_payload(struct drm_dp_mst_topology_mgr *mgr,
int id, struct drm_dp_payload *payload)
{
u8 payload_alloc[3], status;
int ret;
int retries = 0;
drm_dp_dpcd_writeb(mgr->aux, DP_PAYLOAD_TABLE_UPDATE_STATUS,
DP_PAYLOAD_TABLE_UPDATED);
payload_alloc[0] = id;
payload_alloc[1] = payload->start_slot;
payload_alloc[2] = payload->num_slots;
ret = drm_dp_dpcd_write(mgr->aux, DP_PAYLOAD_ALLOCATE_SET, payload_alloc, 3);
if (ret != 3) {
DRM_DEBUG_KMS("failed to write payload allocation %d\n", ret);
goto fail;
}
retry:
ret = drm_dp_dpcd_readb(mgr->aux, DP_PAYLOAD_TABLE_UPDATE_STATUS, &status);
if (ret < 0) {
DRM_DEBUG_KMS("failed to read payload table status %d\n", ret);
goto fail;
}
if (!(status & DP_PAYLOAD_TABLE_UPDATED)) {
retries++;
if (retries < 20) {
usleep_range(10000, 20000);
goto retry;
}
DRM_DEBUG_KMS("status not set after read payload table status %d\n", status);
ret = -EINVAL;
goto fail;
}
ret = 0;
fail:
return ret;
}
/**
* drm_dp_check_act_status() - Check ACT handled status.
* @mgr: manager to use
*
* Check the payload status bits in the DPCD for ACT handled completion.
*/
int drm_dp_check_act_status(struct drm_dp_mst_topology_mgr *mgr)
{
u8 status;
int ret;
int count = 0;
do {
ret = drm_dp_dpcd_readb(mgr->aux, DP_PAYLOAD_TABLE_UPDATE_STATUS, &status);
if (ret < 0) {
DRM_DEBUG_KMS("failed to read payload table status %d\n", ret);
goto fail;
}
if (status & DP_PAYLOAD_ACT_HANDLED)
break;
count++;
udelay(100);
} while (count < 30);
if (!(status & DP_PAYLOAD_ACT_HANDLED)) {
DRM_DEBUG_KMS("failed to get ACT bit %d after %d retries\n", status, count);
ret = -EINVAL;
goto fail;
}
return 0;
fail:
return ret;
}
EXPORT_SYMBOL(drm_dp_check_act_status);
/**
* drm_dp_calc_pbn_mode() - Calculate the PBN for a mode.
* @clock: dot clock for the mode
* @bpp: bpp for the mode.
*
* This uses the formula in the spec to calculate the PBN value for a mode.
*/
int drm_dp_calc_pbn_mode(int clock, int bpp)
{
u64 kbps;
s64 peak_kbps;
u32 numerator;
u32 denominator;
kbps = clock * bpp;
/*
* margin 5300ppm + 300ppm ~ 0.6% as per spec, factor is 1.006
* The unit of 54/64Mbytes/sec is an arbitrary unit chosen based on
* common multiplier to render an integer PBN for all link rate/lane
* counts combinations
* calculate
* peak_kbps *= (1006/1000)
* peak_kbps *= (64/54)
* peak_kbps *= 8 convert to bytes
*/
numerator = 64 * 1006;
denominator = 54 * 8 * 1000 * 1000;
kbps *= numerator;
peak_kbps = drm_fixp_from_fraction(kbps, denominator);
return drm_fixp2int_ceil(peak_kbps);
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
}
EXPORT_SYMBOL(drm_dp_calc_pbn_mode);
static int test_calc_pbn_mode(void)
{
int ret;
ret = drm_dp_calc_pbn_mode(154000, 30);
if (ret != 689) {
DRM_ERROR("PBN calculation test failed - clock %d, bpp %d, expected PBN %d, actual PBN %d.\n",
154000, 30, 689, ret);
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
return -EINVAL;
}
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
ret = drm_dp_calc_pbn_mode(234000, 30);
if (ret != 1047) {
DRM_ERROR("PBN calculation test failed - clock %d, bpp %d, expected PBN %d, actual PBN %d.\n",
234000, 30, 1047, ret);
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
return -EINVAL;
}
ret = drm_dp_calc_pbn_mode(297000, 24);
if (ret != 1063) {
DRM_ERROR("PBN calculation test failed - clock %d, bpp %d, expected PBN %d, actual PBN %d.\n",
297000, 24, 1063, ret);
return -EINVAL;
}
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
return 0;
}
/* we want to kick the TX after we've ack the up/down IRQs. */
static void drm_dp_mst_kick_tx(struct drm_dp_mst_topology_mgr *mgr)
{
queue_work(system_long_wq, &mgr->tx_work);
}
static void drm_dp_mst_dump_mstb(struct seq_file *m,
struct drm_dp_mst_branch *mstb)
{
struct drm_dp_mst_port *port;
int tabs = mstb->lct;
char prefix[10];
int i;
for (i = 0; i < tabs; i++)
prefix[i] = '\t';
prefix[i] = '\0';
seq_printf(m, "%smst: %p, %d\n", prefix, mstb, mstb->num_ports);
list_for_each_entry(port, &mstb->ports, next) {
seq_printf(m, "%sport: %d: input: %d: pdt: %d, ddps: %d ldps: %d, sdp: %d/%d, %p, conn: %p\n", prefix, port->port_num, port->input, port->pdt, port->ddps, port->ldps, port->num_sdp_streams, port->num_sdp_stream_sinks, port, port->connector);
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
if (port->mstb)
drm_dp_mst_dump_mstb(m, port->mstb);
}
}
static bool dump_dp_payload_table(struct drm_dp_mst_topology_mgr *mgr,
char *buf)
{
int ret;
int i;
for (i = 0; i < 4; i++) {
ret = drm_dp_dpcd_read(mgr->aux, DP_PAYLOAD_TABLE_UPDATE_STATUS + (i * 16), &buf[i * 16], 16);
if (ret != 16)
break;
}
if (i == 4)
return true;
return false;
}
static void fetch_monitor_name(struct drm_dp_mst_topology_mgr *mgr,
struct drm_dp_mst_port *port, char *name,
int namelen)
{
struct edid *mst_edid;
mst_edid = drm_dp_mst_get_edid(port->connector, mgr, port);
drm_edid_get_monitor_name(mst_edid, name, namelen);
}
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
/**
* drm_dp_mst_dump_topology(): dump topology to seq file.
* @m: seq_file to dump output to
* @mgr: manager to dump current topology for.
*
* helper to dump MST topology to a seq file for debugfs.
*/
void drm_dp_mst_dump_topology(struct seq_file *m,
struct drm_dp_mst_topology_mgr *mgr)
{
int i;
struct drm_dp_mst_port *port;
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
mutex_lock(&mgr->lock);
if (mgr->mst_primary)
drm_dp_mst_dump_mstb(m, mgr->mst_primary);
/* dump VCPIs */
mutex_unlock(&mgr->lock);
mutex_lock(&mgr->payload_lock);
seq_printf(m, "vcpi: %lx %lx %d\n", mgr->payload_mask, mgr->vcpi_mask,
mgr->max_payloads);
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
for (i = 0; i < mgr->max_payloads; i++) {
if (mgr->proposed_vcpis[i]) {
char name[14];
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
port = container_of(mgr->proposed_vcpis[i], struct drm_dp_mst_port, vcpi);
fetch_monitor_name(mgr, port, name, sizeof(name));
seq_printf(m, "vcpi %d: %d %d %d sink name: %s\n", i,
port->port_num, port->vcpi.vcpi,
port->vcpi.num_slots,
(*name != 0) ? name : "Unknown");
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
} else
seq_printf(m, "vcpi %d:unused\n", i);
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
}
for (i = 0; i < mgr->max_payloads; i++) {
seq_printf(m, "payload %d: %d, %d, %d\n",
i,
mgr->payloads[i].payload_state,
mgr->payloads[i].start_slot,
mgr->payloads[i].num_slots);
}
mutex_unlock(&mgr->payload_lock);
mutex_lock(&mgr->lock);
if (mgr->mst_primary) {
u8 buf[64];
bool bret;
int ret;
ret = drm_dp_dpcd_read(mgr->aux, DP_DPCD_REV, buf, DP_RECEIVER_CAP_SIZE);
seq_printf(m, "dpcd: ");
for (i = 0; i < DP_RECEIVER_CAP_SIZE; i++)
seq_printf(m, "%02x ", buf[i]);
seq_printf(m, "\n");
ret = drm_dp_dpcd_read(mgr->aux, DP_FAUX_CAP, buf, 2);
seq_printf(m, "faux/mst: ");
for (i = 0; i < 2; i++)
seq_printf(m, "%02x ", buf[i]);
seq_printf(m, "\n");
ret = drm_dp_dpcd_read(mgr->aux, DP_MSTM_CTRL, buf, 1);
seq_printf(m, "mst ctrl: ");
for (i = 0; i < 1; i++)
seq_printf(m, "%02x ", buf[i]);
seq_printf(m, "\n");
/* dump the standard OUI branch header */
ret = drm_dp_dpcd_read(mgr->aux, DP_BRANCH_OUI, buf, DP_BRANCH_OUI_HEADER_SIZE);
seq_printf(m, "branch oui: ");
for (i = 0; i < 0x3; i++)
seq_printf(m, "%02x", buf[i]);
seq_printf(m, " devid: ");
for (i = 0x3; i < 0x8 && buf[i]; i++)
seq_printf(m, "%c", buf[i]);
seq_printf(m, " revision: hw: %x.%x sw: %x.%x", buf[0x9] >> 4, buf[0x9] & 0xf, buf[0xa], buf[0xb]);
seq_printf(m, "\n");
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
bret = dump_dp_payload_table(mgr, buf);
if (bret == true) {
seq_printf(m, "payload table: ");
for (i = 0; i < 63; i++)
seq_printf(m, "%02x ", buf[i]);
seq_printf(m, "\n");
}
}
mutex_unlock(&mgr->lock);
}
EXPORT_SYMBOL(drm_dp_mst_dump_topology);
static void drm_dp_tx_work(struct work_struct *work)
{
struct drm_dp_mst_topology_mgr *mgr = container_of(work, struct drm_dp_mst_topology_mgr, tx_work);
mutex_lock(&mgr->qlock);
if (mgr->tx_down_in_progress)
process_single_down_tx_qlock(mgr);
mutex_unlock(&mgr->qlock);
}
static void drm_dp_free_mst_port(struct kref *kref)
{
struct drm_dp_mst_port *port = container_of(kref, struct drm_dp_mst_port, kref);
kref_put(&port->parent->kref, drm_dp_free_mst_branch_device);
kfree(port);
}
static void drm_dp_destroy_connector_work(struct work_struct *work)
{
struct drm_dp_mst_topology_mgr *mgr = container_of(work, struct drm_dp_mst_topology_mgr, destroy_connector_work);
struct drm_dp_mst_port *port;
bool send_hotplug = false;
/*
* Not a regular list traverse as we have to drop the destroy
* connector lock before destroying the connector, to avoid AB->BA
* ordering between this lock and the config mutex.
*/
for (;;) {
mutex_lock(&mgr->destroy_connector_lock);
port = list_first_entry_or_null(&mgr->destroy_connector_list, struct drm_dp_mst_port, next);
if (!port) {
mutex_unlock(&mgr->destroy_connector_lock);
break;
}
list_del(&port->next);
mutex_unlock(&mgr->destroy_connector_lock);
kref_init(&port->kref);
INIT_LIST_HEAD(&port->next);
mgr->cbs->destroy_connector(mgr, port->connector);
drm_dp_port_teardown_pdt(port, port->pdt);
if (!port->input && port->vcpi.vcpi > 0) {
drm_dp_mst_reset_vcpi_slots(mgr, port);
drm_dp_update_payload_part1(mgr);
drm_dp_mst_put_payload_id(mgr, port->vcpi.vcpi);
}
kref_put(&port->kref, drm_dp_free_mst_port);
send_hotplug = true;
}
if (send_hotplug)
(*mgr->cbs->hotplug)(mgr);
}
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
/**
* drm_dp_mst_topology_mgr_init - initialise a topology manager
* @mgr: manager struct to initialise
* @dev: device providing this structure - for i2c addition.
* @aux: DP helper aux channel to talk to this device
* @max_dpcd_transaction_bytes: hw specific DPCD transaction limit
* @max_payloads: maximum number of payloads this GPU can source
* @conn_base_id: the connector object ID the MST device is connected to.
*
* Return 0 for success, or negative error code on failure
*/
int drm_dp_mst_topology_mgr_init(struct drm_dp_mst_topology_mgr *mgr,
struct device *dev, struct drm_dp_aux *aux,
int max_dpcd_transaction_bytes,
int max_payloads, int conn_base_id)
{
mutex_init(&mgr->lock);
mutex_init(&mgr->qlock);
mutex_init(&mgr->payload_lock);
mutex_init(&mgr->destroy_connector_lock);
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
INIT_LIST_HEAD(&mgr->tx_msg_downq);
INIT_LIST_HEAD(&mgr->destroy_connector_list);
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
INIT_WORK(&mgr->work, drm_dp_mst_link_probe_work);
INIT_WORK(&mgr->tx_work, drm_dp_tx_work);
INIT_WORK(&mgr->destroy_connector_work, drm_dp_destroy_connector_work);
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
init_waitqueue_head(&mgr->tx_waitq);
mgr->dev = dev;
mgr->aux = aux;
mgr->max_dpcd_transaction_bytes = max_dpcd_transaction_bytes;
mgr->max_payloads = max_payloads;
mgr->conn_base_id = conn_base_id;
if (max_payloads + 1 > sizeof(mgr->payload_mask) * 8 ||
max_payloads + 1 > sizeof(mgr->vcpi_mask) * 8)
return -EINVAL;
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
mgr->payloads = kcalloc(max_payloads, sizeof(struct drm_dp_payload), GFP_KERNEL);
if (!mgr->payloads)
return -ENOMEM;
mgr->proposed_vcpis = kcalloc(max_payloads, sizeof(struct drm_dp_vcpi *), GFP_KERNEL);
if (!mgr->proposed_vcpis)
return -ENOMEM;
set_bit(0, &mgr->payload_mask);
if (test_calc_pbn_mode() < 0)
DRM_ERROR("MST PBN self-test failed\n");
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
return 0;
}
EXPORT_SYMBOL(drm_dp_mst_topology_mgr_init);
/**
* drm_dp_mst_topology_mgr_destroy() - destroy topology manager.
* @mgr: manager to destroy
*/
void drm_dp_mst_topology_mgr_destroy(struct drm_dp_mst_topology_mgr *mgr)
{
drm/dp/mst: drop cancel work sync in the mstb destroy path (v2) Since 9eb1e57f564d4e6e10991402726cc83fe0b9172f drm/dp/mst: make sure mst_primary mstb is valid in work function we validate the mstb structs in the work function, and doing that takes a reference. So we should never get here with the work function running using the mstb device, only if the work function hasn't run yet or is running for another mstb. So we don't need to sync the work here, this was causing lockdep spew as below. [ +0.000160] ============================================= [ +0.000001] [ INFO: possible recursive locking detected ] [ +0.000002] 3.10.0-320.el7.rhel72.stable.backport.3.x86_64.debug #1 Tainted: G W ------------ [ +0.000001] --------------------------------------------- [ +0.000001] kworker/4:2/1262 is trying to acquire lock: [ +0.000001] ((&mgr->work)){+.+.+.}, at: [<ffffffff810b29a5>] flush_work+0x5/0x2e0 [ +0.000007] but task is already holding lock: [ +0.000001] ((&mgr->work)){+.+.+.}, at: [<ffffffff810b57e4>] process_one_work+0x1b4/0x710 [ +0.000004] other info that might help us debug this: [ +0.000001] Possible unsafe locking scenario: [ +0.000002] CPU0 [ +0.000000] ---- [ +0.000001] lock((&mgr->work)); [ +0.000002] lock((&mgr->work)); [ +0.000001] *** DEADLOCK *** [ +0.000001] May be due to missing lock nesting notation [ +0.000002] 2 locks held by kworker/4:2/1262: [ +0.000001] #0: (events_long){.+.+.+}, at: [<ffffffff810b57e4>] process_one_work+0x1b4/0x710 [ +0.000004] #1: ((&mgr->work)){+.+.+.}, at: [<ffffffff810b57e4>] process_one_work+0x1b4/0x710 [ +0.000003] stack backtrace: [ +0.000003] CPU: 4 PID: 1262 Comm: kworker/4:2 Tainted: G W ------------ 3.10.0-320.el7.rhel72.stable.backport.3.x86_64.debug #1 [ +0.000001] Hardware name: LENOVO 20EGS0R600/20EGS0R600, BIOS GNET71WW (2.19 ) 02/05/2015 [ +0.000008] Workqueue: events_long drm_dp_mst_link_probe_work [drm_kms_helper] [ +0.000001] ffffffff82c26c90 00000000a527b914 ffff88046399bae8 ffffffff816fe04d [ +0.000004] ffff88046399bb58 ffffffff8110f47f ffff880461438000 0001009b840fc003 [ +0.000002] ffff880461438a98 0000000000000000 0000000804dc26e1 ffffffff824a2c00 [ +0.000003] Call Trace: [ +0.000004] [<ffffffff816fe04d>] dump_stack+0x19/0x1b [ +0.000004] [<ffffffff8110f47f>] __lock_acquire+0x115f/0x1250 [ +0.000002] [<ffffffff8110fd49>] lock_acquire+0x99/0x1e0 [ +0.000002] [<ffffffff810b29a5>] ? flush_work+0x5/0x2e0 [ +0.000002] [<ffffffff810b29ee>] flush_work+0x4e/0x2e0 [ +0.000002] [<ffffffff810b29a5>] ? flush_work+0x5/0x2e0 [ +0.000004] [<ffffffff81025905>] ? native_sched_clock+0x35/0x80 [ +0.000002] [<ffffffff81025959>] ? sched_clock+0x9/0x10 [ +0.000002] [<ffffffff810da1f5>] ? local_clock+0x25/0x30 [ +0.000002] [<ffffffff8110dca9>] ? mark_held_locks+0xb9/0x140 [ +0.000003] [<ffffffff810b4ed5>] ? __cancel_work_timer+0x95/0x160 [ +0.000002] [<ffffffff810b4ee8>] __cancel_work_timer+0xa8/0x160 [ +0.000002] [<ffffffff810b4fb0>] cancel_work_sync+0x10/0x20 [ +0.000007] [<ffffffffa0160d17>] drm_dp_destroy_mst_branch_device+0x27/0x120 [drm_kms_helper] [ +0.000006] [<ffffffffa0163968>] drm_dp_mst_link_probe_work+0x78/0xa0 [drm_kms_helper] [ +0.000002] [<ffffffff810b5850>] process_one_work+0x220/0x710 [ +0.000002] [<ffffffff810b57e4>] ? process_one_work+0x1b4/0x710 [ +0.000005] [<ffffffff810b5e5b>] worker_thread+0x11b/0x3a0 [ +0.000003] [<ffffffff810b5d40>] ? process_one_work+0x710/0x710 [ +0.000002] [<ffffffff810beced>] kthread+0xed/0x100 [ +0.000003] [<ffffffff810bec00>] ? insert_kthread_work+0x80/0x80 [ +0.000003] [<ffffffff817121d8>] ret_from_fork+0x58/0x90 v2: add flush_work. Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2015-09-30 00:39:42 +00:00
flush_work(&mgr->work);
flush_work(&mgr->destroy_connector_work);
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
mutex_lock(&mgr->payload_lock);
kfree(mgr->payloads);
mgr->payloads = NULL;
kfree(mgr->proposed_vcpis);
mgr->proposed_vcpis = NULL;
mutex_unlock(&mgr->payload_lock);
mgr->dev = NULL;
mgr->aux = NULL;
}
EXPORT_SYMBOL(drm_dp_mst_topology_mgr_destroy);
/* I2C device */
static int drm_dp_mst_i2c_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs,
int num)
{
struct drm_dp_aux *aux = adapter->algo_data;
struct drm_dp_mst_port *port = container_of(aux, struct drm_dp_mst_port, aux);
struct drm_dp_mst_branch *mstb;
struct drm_dp_mst_topology_mgr *mgr = port->mgr;
unsigned int i;
bool reading = false;
struct drm_dp_sideband_msg_req_body msg;
struct drm_dp_sideband_msg_tx *txmsg = NULL;
int ret;
mstb = drm_dp_get_validated_mstb_ref(mgr, port->parent);
if (!mstb)
return -EREMOTEIO;
/* construct i2c msg */
/* see if last msg is a read */
if (msgs[num - 1].flags & I2C_M_RD)
reading = true;
if (!reading || (num - 1 > DP_REMOTE_I2C_READ_MAX_TRANSACTIONS)) {
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
DRM_DEBUG_KMS("Unsupported I2C transaction for MST device\n");
ret = -EIO;
goto out;
}
memset(&msg, 0, sizeof(msg));
drm/helper: add Displayport multi-stream helper (v0.6) This is the initial import of the helper for displayport multistream. It consists of a topology manager, init/destroy/set mst state It supports DP 1.2 MST sideband msg protocol handler - via hpd irqs connector detect and edid retrieval interface. It supports i2c device over DP 1.2 sideband msg protocol (EDID reads only) bandwidth manager API via vcpi allocation and payload updating, along with a helper to check the ACT status. Objects: MST topology manager - one per toplevel MST capable GPU port - not sure if this should be higher level again MST branch unit - one instance per plugged branching unit - one at top of hierarchy - others hanging from ports MST port - one port per port reported by branching units, can have MST units hanging from them as well. Changes since initial posting: a) add a mutex responsbile for the queues, it locks the sideband and msg slots, and msgs to transmit state b) add worker to handle connection state change events, for MST device chaining and hotplug c) add a payload spinlock d) add path sideband msg support e) fixup enum path resources transmit f) reduce max dpcd msg to 16, as per DP1.2 spec. g) separate tx queue kicking from irq processing and move irq acking back to drivers. Changes since v0.2: a) reorganise code, b) drop ACT forcing code c) add connector naming interface using path property d) add topology dumper helper e) proper reference counting and lookup for ports and mstbs. f) move tx kicking into a workq g) add aux locking - this should be redone h) split teardown into two parts i) start working on documentation on interface. Changes since v0.3: a) vc payload locking and tracking fixes b) add hotplug callback into driver - replaces crazy return 1 scheme c) txmsg + mst branch device refcount fixes d) don't bail on mst shutdown if device is gone e) change irq handler to take all 4 bytes of SINK_COUNT + ESI vectors f) make DP payload updates timeout longer - observed on docking station redock g) add more info to debugfs dumper Changes since v0.4: a) suspend/resume support b) more debugging in debugfs Changes since v0.5: a) use byte * to avoid unnecessary stack usage b) fix num_sdp_streams interpretation. c) init payload state for unplug events d) remove lenovo dock sink count hack e) drop aux lock - post rebase f) call hotplug on port destroy TODO: misc features Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 04:01:32 +00:00
msg.req_type = DP_REMOTE_I2C_READ;
msg.u.i2c_read.num_transactions = num - 1;
msg.u.i2c_read.port_number = port->port_num;
for (i = 0; i < num - 1; i++) {
msg.u.i2c_read.transactions[i].i2c_dev_id = msgs[i].addr;
msg.u.i2c_read.transactions[i].num_bytes = msgs[i].len;
msg.u.i2c_read.transactions[i].bytes = msgs[i].buf;
}
msg.u.i2c_read.read_i2c_device_id = msgs[num - 1].addr;
msg.u.i2c_read.num_bytes_read = msgs[num - 1].len;
txmsg = kzalloc(sizeof(*txmsg), GFP_KERNEL);
if (!txmsg) {
ret = -ENOMEM;
goto out;
}
txmsg->dst = mstb;
drm_dp_encode_sideband_req(&msg, txmsg);
drm_dp_queue_down_tx(mgr, txmsg);
ret = drm_dp_mst_wait_tx_reply(mstb, txmsg);
if (ret > 0) {
if (txmsg->reply.reply_type == 1) { /* got a NAK back */
ret = -EREMOTEIO;
goto out;
}
if (txmsg->reply.u.remote_i2c_read_ack.num_bytes != msgs[num - 1].len) {
ret = -EIO;
goto out;
}
memcpy(msgs[num - 1].buf, txmsg->reply.u.remote_i2c_read_ack.bytes, msgs[num - 1].len);
ret = num;
}
out:
kfree(txmsg);
drm_dp_put_mst_branch_device(mstb);
return ret;
}
static u32 drm_dp_mst_i2c_functionality(struct i2c_adapter *adapter)
{
return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL |
I2C_FUNC_SMBUS_READ_BLOCK_DATA |
I2C_FUNC_SMBUS_BLOCK_PROC_CALL |
I2C_FUNC_10BIT_ADDR;
}
static const struct i2c_algorithm drm_dp_mst_i2c_algo = {
.functionality = drm_dp_mst_i2c_functionality,
.master_xfer = drm_dp_mst_i2c_xfer,
};
/**
* drm_dp_mst_register_i2c_bus() - register an I2C adapter for I2C-over-AUX
* @aux: DisplayPort AUX channel
*
* Returns 0 on success or a negative error code on failure.
*/
static int drm_dp_mst_register_i2c_bus(struct drm_dp_aux *aux)
{
aux->ddc.algo = &drm_dp_mst_i2c_algo;
aux->ddc.algo_data = aux;
aux->ddc.retries = 3;
aux->ddc.class = I2C_CLASS_DDC;
aux->ddc.owner = THIS_MODULE;
aux->ddc.dev.parent = aux->dev;
aux->ddc.dev.of_node = aux->dev->of_node;
strlcpy(aux->ddc.name, aux->name ? aux->name : dev_name(aux->dev),
sizeof(aux->ddc.name));
return i2c_add_adapter(&aux->ddc);
}
/**
* drm_dp_mst_unregister_i2c_bus() - unregister an I2C-over-AUX adapter
* @aux: DisplayPort AUX channel
*/
static void drm_dp_mst_unregister_i2c_bus(struct drm_dp_aux *aux)
{
i2c_del_adapter(&aux->ddc);
}