Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-11-18 10:01:43 +00:00
Code Issues Packages Projects Releases Wiki Activity
1a4b181995
linux/drivers/clk/rockchip/clk.c

299 lines
7.9 KiB
C
Raw Normal View History

clk: rockchip: add basic infrastructure for clock branches This adds infrastructure for registering clock branches. On Rockchip SoCs most clock branches are a combination of mux,divider and gate components, thus a composite clock is used when appropriate. Clock branches are supposed to be declared in an array using the COMPOSITE* or MUX, etc makros defined in the header and then registered using rockchip_clk_register_branches. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-By: Max Schwarz <max.schwarz@online.de> Tested-By: Max Schwarz <max.schwarz@online.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-02 23:58:39 +00:00
/*
* Copyright (c) 2014 MundoReader S.L.
* Author: Heiko Stuebner <heiko@sntech.de>
*
* based on
*
* samsung/clk.c
* Copyright (c) 2013 Samsung Electronics Co., Ltd.
* Copyright (c) 2013 Linaro Ltd.
* Author: Thomas Abraham <thomas.ab@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/slab.h>
#include <linux/clk.h>
#include <linux/clk-provider.h>
clk: rockchip: add clock type for pll clocks and pll used on rk3066 All known Rockchip SoCs down to the RK28xx (ARM9) use a similar pattern to handle their plls: |--\ xin32k ----------------|mux\ xin24m -----| pll |----|pll|--- pll output \---------------|src/ |--/ The pll output is sourced from 1 of 3 sources, the actual pll being one of them. To change the pll frequency it is imperative to remux it to another source beforehand. This is done by adding a clock-listener to the pll that handles the remuxing before and after the rate change. The output mux is implemented as a separate clock to make use of already existing common-clock features for disabling the pll if one of the other two sources is used. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-By: Max Schwarz <max.schwarz@online.de> Tested-By: Max Schwarz <max.schwarz@online.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-02 23:59:10 +00:00
#include <linux/mfd/syscon.h>
#include <linux/regmap.h>
clk: rockchip: add basic infrastructure for clock branches This adds infrastructure for registering clock branches. On Rockchip SoCs most clock branches are a combination of mux,divider and gate components, thus a composite clock is used when appropriate. Clock branches are supposed to be declared in an array using the COMPOSITE* or MUX, etc makros defined in the header and then registered using rockchip_clk_register_branches. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-By: Max Schwarz <max.schwarz@online.de> Tested-By: Max Schwarz <max.schwarz@online.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-02 23:58:39 +00:00
#include "clk.h"
/**
* Register a clock branch.
* Most clock branches have a form like
*
* src1 --|--\
* |M |--[GATE]-[DIV]-
* src2 --|--/
*
* sometimes without one of those components.
*/
clk: rockchip: make rockchip_clk_register_branch static It is only used locally in clk/rockchip/clk.c and thus can be static. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-08-26 22:54:56 +00:00
static struct clk *rockchip_clk_register_branch(const char *name,
clk: rockchip: add basic infrastructure for clock branches This adds infrastructure for registering clock branches. On Rockchip SoCs most clock branches are a combination of mux,divider and gate components, thus a composite clock is used when appropriate. Clock branches are supposed to be declared in an array using the COMPOSITE* or MUX, etc makros defined in the header and then registered using rockchip_clk_register_branches. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-By: Max Schwarz <max.schwarz@online.de> Tested-By: Max Schwarz <max.schwarz@online.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-02 23:58:39 +00:00
const char **parent_names, u8 num_parents, void __iomem *base,
int muxdiv_offset, u8 mux_shift, u8 mux_width, u8 mux_flags,
u8 div_shift, u8 div_width, u8 div_flags,
struct clk_div_table *div_table, int gate_offset,
u8 gate_shift, u8 gate_flags, unsigned long flags,
spinlock_t *lock)
{
struct clk *clk;
struct clk_mux *mux = NULL;
struct clk_gate *gate = NULL;
struct clk_divider *div = NULL;
const struct clk_ops *mux_ops = NULL, *div_ops = NULL,
*gate_ops = NULL;
if (num_parents > 1) {
mux = kzalloc(sizeof(*mux), GFP_KERNEL);
if (!mux)
return ERR_PTR(-ENOMEM);
mux->reg = base + muxdiv_offset;
mux->shift = mux_shift;
mux->mask = BIT(mux_width) - 1;
mux->flags = mux_flags;
mux->lock = lock;
mux_ops = (mux_flags & CLK_MUX_READ_ONLY) ? &clk_mux_ro_ops
: &clk_mux_ops;
}
if (gate_offset >= 0) {
gate = kzalloc(sizeof(*gate), GFP_KERNEL);
if (!gate)
return ERR_PTR(-ENOMEM);
gate->flags = gate_flags;
gate->reg = base + gate_offset;
gate->bit_idx = gate_shift;
gate->lock = lock;
gate_ops = &clk_gate_ops;
}
if (div_width > 0) {
div = kzalloc(sizeof(*div), GFP_KERNEL);
if (!div)
return ERR_PTR(-ENOMEM);
div->flags = div_flags;
div->reg = base + muxdiv_offset;
div->shift = div_shift;
div->width = div_width;
div->lock = lock;
div->table = div_table;
div_ops = (div_flags & CLK_DIVIDER_READ_ONLY)
? &clk_divider_ro_ops
: &clk_divider_ops;
}
clk = clk_register_composite(NULL, name, parent_names, num_parents,
mux ? &mux->hw : NULL, mux_ops,
div ? &div->hw : NULL, div_ops,
gate ? &gate->hw : NULL, gate_ops,
flags);
return clk;
}
clk: rockchip: implement the fraction divider branch type Rockchip SoCs may provide fraction dividers for some clocks, mostly for i2s and uarts. In contrast to the other registers, these do not use the hiword-mask paradigm, but instead split the register into the upper 16 bit for the nominator and the lower 16 bit for the denominator. The common clock framework got a generic fractional divider clock type recently that can accomodate this setting easily. All currently known fraction dividers have a separate gate too, therefore implement the divider as composite using the ops-struct from fractional_divider clock and add the gate if necessary. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-08-26 22:54:21 +00:00
static struct clk *rockchip_clk_register_frac_branch(const char *name,
const char **parent_names, u8 num_parents, void __iomem *base,
int muxdiv_offset, u8 div_flags,
int gate_offset, u8 gate_shift, u8 gate_flags,
unsigned long flags, spinlock_t *lock)
{
struct clk *clk;
struct clk_gate *gate = NULL;
struct clk_fractional_divider *div = NULL;
const struct clk_ops *div_ops = NULL, *gate_ops = NULL;
if (gate_offset >= 0) {
gate = kzalloc(sizeof(*gate), GFP_KERNEL);
if (!gate)
return ERR_PTR(-ENOMEM);
gate->flags = gate_flags;
gate->reg = base + gate_offset;
gate->bit_idx = gate_shift;
gate->lock = lock;
gate_ops = &clk_gate_ops;
}
if (muxdiv_offset < 0)
return ERR_PTR(-EINVAL);
div = kzalloc(sizeof(*div), GFP_KERNEL);
if (!div)
return ERR_PTR(-ENOMEM);
div->flags = div_flags;
div->reg = base + muxdiv_offset;
div->mshift = 16;
div->mmask = 0xffff0000;
div->nshift = 0;
div->nmask = 0xffff;
div->lock = lock;
div_ops = &clk_fractional_divider_ops;
clk = clk_register_composite(NULL, name, parent_names, num_parents,
NULL, NULL,
&div->hw, div_ops,
gate ? &gate->hw : NULL, gate_ops,
flags);
return clk;
}
clk: rockchip: add basic infrastructure for clock branches This adds infrastructure for registering clock branches. On Rockchip SoCs most clock branches are a combination of mux,divider and gate components, thus a composite clock is used when appropriate. Clock branches are supposed to be declared in an array using the COMPOSITE* or MUX, etc makros defined in the header and then registered using rockchip_clk_register_branches. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-By: Max Schwarz <max.schwarz@online.de> Tested-By: Max Schwarz <max.schwarz@online.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-02 23:58:39 +00:00
static DEFINE_SPINLOCK(clk_lock);
static struct clk **clk_table;
static void __iomem *reg_base;
static struct clk_onecell_data clk_data;
clk: rockchip: add clock type for pll clocks and pll used on rk3066 All known Rockchip SoCs down to the RK28xx (ARM9) use a similar pattern to handle their plls: |--\ xin32k ----------------|mux\ xin24m -----| pll |----|pll|--- pll output \---------------|src/ |--/ The pll output is sourced from 1 of 3 sources, the actual pll being one of them. To change the pll frequency it is imperative to remux it to another source beforehand. This is done by adding a clock-listener to the pll that handles the remuxing before and after the rate change. The output mux is implemented as a separate clock to make use of already existing common-clock features for disabling the pll if one of the other two sources is used. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-By: Max Schwarz <max.schwarz@online.de> Tested-By: Max Schwarz <max.schwarz@online.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-02 23:59:10 +00:00
static struct device_node *cru_node;
static struct regmap *grf;
clk: rockchip: add basic infrastructure for clock branches This adds infrastructure for registering clock branches. On Rockchip SoCs most clock branches are a combination of mux,divider and gate components, thus a composite clock is used when appropriate. Clock branches are supposed to be declared in an array using the COMPOSITE* or MUX, etc makros defined in the header and then registered using rockchip_clk_register_branches. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-By: Max Schwarz <max.schwarz@online.de> Tested-By: Max Schwarz <max.schwarz@online.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-02 23:58:39 +00:00
void __init rockchip_clk_init(struct device_node *np, void __iomem *base,
unsigned long nr_clks)
{
reg_base = base;
clk: rockchip: add clock type for pll clocks and pll used on rk3066 All known Rockchip SoCs down to the RK28xx (ARM9) use a similar pattern to handle their plls: |--\ xin32k ----------------|mux\ xin24m -----| pll |----|pll|--- pll output \---------------|src/ |--/ The pll output is sourced from 1 of 3 sources, the actual pll being one of them. To change the pll frequency it is imperative to remux it to another source beforehand. This is done by adding a clock-listener to the pll that handles the remuxing before and after the rate change. The output mux is implemented as a separate clock to make use of already existing common-clock features for disabling the pll if one of the other two sources is used. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-By: Max Schwarz <max.schwarz@online.de> Tested-By: Max Schwarz <max.schwarz@online.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-02 23:59:10 +00:00
cru_node = np;
grf = ERR_PTR(-EPROBE_DEFER);
clk: rockchip: add basic infrastructure for clock branches This adds infrastructure for registering clock branches. On Rockchip SoCs most clock branches are a combination of mux,divider and gate components, thus a composite clock is used when appropriate. Clock branches are supposed to be declared in an array using the COMPOSITE* or MUX, etc makros defined in the header and then registered using rockchip_clk_register_branches. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-By: Max Schwarz <max.schwarz@online.de> Tested-By: Max Schwarz <max.schwarz@online.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-02 23:58:39 +00:00
clk_table = kcalloc(nr_clks, sizeof(struct clk *), GFP_KERNEL);
if (!clk_table)
pr_err("%s: could not allocate clock lookup table\n", __func__);
clk_data.clks = clk_table;
clk_data.clk_num = nr_clks;
of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
}
clk: rockchip: add clock type for pll clocks and pll used on rk3066 All known Rockchip SoCs down to the RK28xx (ARM9) use a similar pattern to handle their plls: |--\ xin32k ----------------|mux\ xin24m -----| pll |----|pll|--- pll output \---------------|src/ |--/ The pll output is sourced from 1 of 3 sources, the actual pll being one of them. To change the pll frequency it is imperative to remux it to another source beforehand. This is done by adding a clock-listener to the pll that handles the remuxing before and after the rate change. The output mux is implemented as a separate clock to make use of already existing common-clock features for disabling the pll if one of the other two sources is used. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-By: Max Schwarz <max.schwarz@online.de> Tested-By: Max Schwarz <max.schwarz@online.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-02 23:59:10 +00:00
struct regmap *rockchip_clk_get_grf(void)
{
if (IS_ERR(grf))
grf = syscon_regmap_lookup_by_phandle(cru_node, "rockchip,grf");
return grf;
}
clk: rockchip: add basic infrastructure for clock branches This adds infrastructure for registering clock branches. On Rockchip SoCs most clock branches are a combination of mux,divider and gate components, thus a composite clock is used when appropriate. Clock branches are supposed to be declared in an array using the COMPOSITE* or MUX, etc makros defined in the header and then registered using rockchip_clk_register_branches. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-By: Max Schwarz <max.schwarz@online.de> Tested-By: Max Schwarz <max.schwarz@online.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-02 23:58:39 +00:00
void rockchip_clk_add_lookup(struct clk *clk, unsigned int id)
{
if (clk_table && id)
clk_table[id] = clk;
}
clk: rockchip: add clock type for pll clocks and pll used on rk3066 All known Rockchip SoCs down to the RK28xx (ARM9) use a similar pattern to handle their plls: |--\ xin32k ----------------|mux\ xin24m -----| pll |----|pll|--- pll output \---------------|src/ |--/ The pll output is sourced from 1 of 3 sources, the actual pll being one of them. To change the pll frequency it is imperative to remux it to another source beforehand. This is done by adding a clock-listener to the pll that handles the remuxing before and after the rate change. The output mux is implemented as a separate clock to make use of already existing common-clock features for disabling the pll if one of the other two sources is used. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-By: Max Schwarz <max.schwarz@online.de> Tested-By: Max Schwarz <max.schwarz@online.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-02 23:59:10 +00:00
void __init rockchip_clk_register_plls(struct rockchip_pll_clock *list,
unsigned int nr_pll, int grf_lock_offset)
{
struct clk *clk;
int idx;
for (idx = 0; idx < nr_pll; idx++, list++) {
clk = rockchip_clk_register_pll(list->type, list->name,
list->parent_names, list->num_parents,
reg_base, list->con_offset, grf_lock_offset,
list->lock_shift, list->mode_offset,
list->mode_shift, list->rate_table, &clk_lock);
if (IS_ERR(clk)) {
pr_err("%s: failed to register clock %s\n", __func__,
list->name);
continue;
}
rockchip_clk_add_lookup(clk, list->id);
}
}
clk: rockchip: add basic infrastructure for clock branches This adds infrastructure for registering clock branches. On Rockchip SoCs most clock branches are a combination of mux,divider and gate components, thus a composite clock is used when appropriate. Clock branches are supposed to be declared in an array using the COMPOSITE* or MUX, etc makros defined in the header and then registered using rockchip_clk_register_branches. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-By: Max Schwarz <max.schwarz@online.de> Tested-By: Max Schwarz <max.schwarz@online.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-02 23:58:39 +00:00
void __init rockchip_clk_register_branches(
struct rockchip_clk_branch *list,
unsigned int nr_clk)
{
struct clk *clk = NULL;
unsigned int idx;
unsigned long flags;
for (idx = 0; idx < nr_clk; idx++, list++) {
flags = list->flags;
/* catch simple muxes */
switch (list->branch_type) {
case branch_mux:
clk = clk_register_mux(NULL, list->name,
list->parent_names, list->num_parents,
flags, reg_base + list->muxdiv_offset,
list->mux_shift, list->mux_width,
list->mux_flags, &clk_lock);
break;
case branch_divider:
if (list->div_table)
clk = clk_register_divider_table(NULL,
list->name, list->parent_names[0],
flags, reg_base + list->muxdiv_offset,
list->div_shift, list->div_width,
list->div_flags, list->div_table,
&clk_lock);
else
clk = clk_register_divider(NULL, list->name,
list->parent_names[0], flags,
reg_base + list->muxdiv_offset,
list->div_shift, list->div_width,
list->div_flags, &clk_lock);
break;
case branch_fraction_divider:
clk: rockchip: implement the fraction divider branch type Rockchip SoCs may provide fraction dividers for some clocks, mostly for i2s and uarts. In contrast to the other registers, these do not use the hiword-mask paradigm, but instead split the register into the upper 16 bit for the nominator and the lower 16 bit for the denominator. The common clock framework got a generic fractional divider clock type recently that can accomodate this setting easily. All currently known fraction dividers have a separate gate too, therefore implement the divider as composite using the ops-struct from fractional_divider clock and add the gate if necessary. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-08-26 22:54:21 +00:00
/* keep all gates untouched for now */
flags |= CLK_IGNORE_UNUSED;
clk = rockchip_clk_register_frac_branch(list->name,
list->parent_names, list->num_parents,
reg_base, list->muxdiv_offset, list->div_flags,
list->gate_offset, list->gate_shift,
list->gate_flags, flags, &clk_lock);
clk: rockchip: add basic infrastructure for clock branches This adds infrastructure for registering clock branches. On Rockchip SoCs most clock branches are a combination of mux,divider and gate components, thus a composite clock is used when appropriate. Clock branches are supposed to be declared in an array using the COMPOSITE* or MUX, etc makros defined in the header and then registered using rockchip_clk_register_branches. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-By: Max Schwarz <max.schwarz@online.de> Tested-By: Max Schwarz <max.schwarz@online.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-02 23:58:39 +00:00
break;
case branch_gate:
flags |= CLK_SET_RATE_PARENT;
/* keep all gates untouched for now */
flags |= CLK_IGNORE_UNUSED;
clk = clk_register_gate(NULL, list->name,
list->parent_names[0], flags,
reg_base + list->gate_offset,
list->gate_shift, list->gate_flags, &clk_lock);
break;
case branch_composite:
/* keep all gates untouched for now */
flags |= CLK_IGNORE_UNUSED;
clk = rockchip_clk_register_branch(list->name,
list->parent_names, list->num_parents,
reg_base, list->muxdiv_offset, list->mux_shift,
list->mux_width, list->mux_flags,
list->div_shift, list->div_width,
list->div_flags, list->div_table,
list->gate_offset, list->gate_shift,
list->gate_flags, flags, &clk_lock);
break;
}
/* none of the cases above matched */
if (!clk) {
pr_err("%s: unknown clock type %d\n",
__func__, list->branch_type);
continue;
}
if (IS_ERR(clk)) {
pr_err("%s: failed to register clock %s: %ld\n",
__func__, list->name, PTR_ERR(clk));
continue;
}
rockchip_clk_add_lookup(clk, list->id);
}
}
Reference in New Issue Copy Permalink