linux/kernel/bpf/core.c

1783 lines
45 KiB
C
Raw Normal View History

/*
* Linux Socket Filter - Kernel level socket filtering
*
* Based on the design of the Berkeley Packet Filter. The new
* internal format has been designed by PLUMgrid:
*
* Copyright (c) 2011 - 2014 PLUMgrid, http://plumgrid.com
*
* Authors:
*
* Jay Schulist <jschlst@samba.org>
* Alexei Starovoitov <ast@plumgrid.com>
* Daniel Borkmann <dborkman@redhat.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
* Andi Kleen - Fix a few bad bugs and races.
* Kris Katterjohn - Added many additional checks in bpf_check_classic()
*/
#include <linux/filter.h>
#include <linux/skbuff.h>
net: bpf: make eBPF interpreter images read-only With eBPF getting more extended and exposure to user space is on it's way, hardening the memory range the interpreter uses to steer its command flow seems appropriate. This patch moves the to be interpreted bytecode to read-only pages. In case we execute a corrupted BPF interpreter image for some reason e.g. caused by an attacker which got past a verifier stage, it would not only provide arbitrary read/write memory access but arbitrary function calls as well. After setting up the BPF interpreter image, its contents do not change until destruction time, thus we can setup the image on immutable made pages in order to mitigate modifications to that code. The idea is derived from commit 314beb9bcabf ("x86: bpf_jit_comp: secure bpf jit against spraying attacks"). This is possible because bpf_prog is not part of sk_filter anymore. After setup bpf_prog cannot be altered during its life-time. This prevents any modifications to the entire bpf_prog structure (incl. function/JIT image pointer). Every eBPF program (including classic BPF that are migrated) have to call bpf_prog_select_runtime() to select either interpreter or a JIT image as a last setup step, and they all are being freed via bpf_prog_free(), including non-JIT. Therefore, we can easily integrate this into the eBPF life-time, plus since we directly allocate a bpf_prog, we have no performance penalty. Tested with seccomp and test_bpf testsuite in JIT/non-JIT mode and manual inspection of kernel_page_tables. Brad Spengler proposed the same idea via Twitter during development of this patch. Joint work with Hannes Frederic Sowa. Suggested-by: Brad Spengler <spender@grsecurity.net> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Kees Cook <keescook@chromium.org> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-02 20:53:44 +00:00
#include <linux/vmalloc.h>
#include <linux/random.h>
#include <linux/moduleloader.h>
#include <linux/bpf.h>
bpf: Mark __bpf_prog_run() stack frame as non-standard objtool reports the following false positive warnings: kernel/bpf/core.o: warning: objtool: __bpf_prog_run()+0x5c: sibling call from callable instruction with changed frame pointer kernel/bpf/core.o: warning: objtool: __bpf_prog_run()+0x60: function has unreachable instruction kernel/bpf/core.o: warning: objtool: __bpf_prog_run()+0x64: function has unreachable instruction [...] It's confused by the following dynamic jump instruction in __bpf_prog_run():: jmp *(%r12,%rax,8) which corresponds to the following line in the C code: goto *jumptable[insn->code]; There's no way for objtool to deterministically find all possible branch targets for a dynamic jump, so it can't verify this code. In this case the jumps all stay within the function, and there's nothing unusual going on related to the stack, so we can whitelist the function. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Bernd Petrovitsch <bernd@petrovitsch.priv.at> Cc: Borislav Petkov <bp@alien8.de> Cc: Chris J Arges <chris.j.arges@canonical.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michal Marek <mmarek@suse.cz> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Pedro Alves <palves@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: live-patching@vger.kernel.org Cc: netdev@vger.kernel.org Link: http://lkml.kernel.org/r/b90e6bf3fdbfb5c4cc1b164b965502e53cf48935.1456719558.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-29 04:22:37 +00:00
#include <linux/frame.h>
bpf: make jited programs visible in traces Long standing issue with JITed programs is that stack traces from function tracing check whether a given address is kernel code through {__,}kernel_text_address(), which checks for code in core kernel, modules and dynamically allocated ftrace trampolines. But what is still missing is BPF JITed programs (interpreted programs are not an issue as __bpf_prog_run() will be attributed to them), thus when a stack trace is triggered, the code walking the stack won't see any of the JITed ones. The same for address correlation done from user space via reading /proc/kallsyms. This is read by tools like perf, but the latter is also useful for permanent live tracing with eBPF itself in combination with stack maps when other eBPF types are part of the callchain. See offwaketime example on dumping stack from a map. This work tries to tackle that issue by making the addresses and symbols known to the kernel. The lookup from *kernel_text_address() is implemented through a latched RB tree that can be read under RCU in fast-path that is also shared for symbol/size/offset lookup for a specific given address in kallsyms. The slow-path iteration through all symbols in the seq file done via RCU list, which holds a tiny fraction of all exported ksyms, usually below 0.1 percent. Function symbols are exported as bpf_prog_<tag>, in order to aide debugging and attribution. This facility is currently enabled for root-only when bpf_jit_kallsyms is set to 1, and disabled if hardening is active in any mode. The rationale behind this is that still a lot of systems ship with world read permissions on kallsyms thus addresses should not get suddenly exposed for them. If that situation gets much better in future, we always have the option to change the default on this. Likewise, unprivileged programs are not allowed to add entries there either, but that is less of a concern as most such programs types relevant in this context are for root-only anyway. If enabled, call graphs and stack traces will then show a correct attribution; one example is illustrated below, where the trace is now visible in tooling such as perf script --kallsyms=/proc/kallsyms and friends. Before: 7fff8166889d bpf_clone_redirect+0x80007f0020ed (/lib/modules/4.9.0-rc8+/build/vmlinux) f5d80 __sendmsg_nocancel+0xffff006451f1a007 (/usr/lib64/libc-2.18.so) After: 7fff816688b7 bpf_clone_redirect+0x80007f002107 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fffa0575728 bpf_prog_33c45a467c9e061a+0x8000600020fb (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fffa07ef1fc cls_bpf_classify+0x8000600020dc (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff81678b68 tc_classify+0x80007f002078 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff8164d40b __netif_receive_skb_core+0x80007f0025fb (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff8164d718 __netif_receive_skb+0x80007f002018 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff8164e565 process_backlog+0x80007f002095 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff8164dc71 net_rx_action+0x80007f002231 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff81767461 __softirqentry_text_start+0x80007f0020d1 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff817658ac do_softirq_own_stack+0x80007f00201c (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff810a2c20 do_softirq+0x80007f002050 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff810a2cb5 __local_bh_enable_ip+0x80007f002085 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff8168d452 ip_finish_output2+0x80007f002152 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff8168ea3d ip_finish_output+0x80007f00217d (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff8168f2af ip_output+0x80007f00203f (/lib/modules/4.9.0-rc8+/build/vmlinux) [...] 7fff81005854 do_syscall_64+0x80007f002054 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff817649eb return_from_SYSCALL_64+0x80007f002000 (/lib/modules/4.9.0-rc8+/build/vmlinux) f5d80 __sendmsg_nocancel+0xffff01c484812007 (/usr/lib64/libc-2.18.so) Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Cc: linux-kernel@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-16 21:24:50 +00:00
#include <linux/rbtree_latch.h>
#include <linux/kallsyms.h>
#include <linux/rcupdate.h>
#include <asm/unaligned.h>
/* Registers */
#define BPF_R0 regs[BPF_REG_0]
#define BPF_R1 regs[BPF_REG_1]
#define BPF_R2 regs[BPF_REG_2]
#define BPF_R3 regs[BPF_REG_3]
#define BPF_R4 regs[BPF_REG_4]
#define BPF_R5 regs[BPF_REG_5]
#define BPF_R6 regs[BPF_REG_6]
#define BPF_R7 regs[BPF_REG_7]
#define BPF_R8 regs[BPF_REG_8]
#define BPF_R9 regs[BPF_REG_9]
#define BPF_R10 regs[BPF_REG_10]
/* Named registers */
#define DST regs[insn->dst_reg]
#define SRC regs[insn->src_reg]
#define FP regs[BPF_REG_FP]
#define ARG1 regs[BPF_REG_ARG1]
#define CTX regs[BPF_REG_CTX]
#define IMM insn->imm
/* No hurry in this branch
*
* Exported for the bpf jit load helper.
*/
void *bpf_internal_load_pointer_neg_helper(const struct sk_buff *skb, int k, unsigned int size)
{
u8 *ptr = NULL;
if (k >= SKF_NET_OFF)
ptr = skb_network_header(skb) + k - SKF_NET_OFF;
else if (k >= SKF_LL_OFF)
ptr = skb_mac_header(skb) + k - SKF_LL_OFF;
if (ptr >= skb->head && ptr + size <= skb_tail_pointer(skb))
return ptr;
return NULL;
}
net: bpf: make eBPF interpreter images read-only With eBPF getting more extended and exposure to user space is on it's way, hardening the memory range the interpreter uses to steer its command flow seems appropriate. This patch moves the to be interpreted bytecode to read-only pages. In case we execute a corrupted BPF interpreter image for some reason e.g. caused by an attacker which got past a verifier stage, it would not only provide arbitrary read/write memory access but arbitrary function calls as well. After setting up the BPF interpreter image, its contents do not change until destruction time, thus we can setup the image on immutable made pages in order to mitigate modifications to that code. The idea is derived from commit 314beb9bcabf ("x86: bpf_jit_comp: secure bpf jit against spraying attacks"). This is possible because bpf_prog is not part of sk_filter anymore. After setup bpf_prog cannot be altered during its life-time. This prevents any modifications to the entire bpf_prog structure (incl. function/JIT image pointer). Every eBPF program (including classic BPF that are migrated) have to call bpf_prog_select_runtime() to select either interpreter or a JIT image as a last setup step, and they all are being freed via bpf_prog_free(), including non-JIT. Therefore, we can easily integrate this into the eBPF life-time, plus since we directly allocate a bpf_prog, we have no performance penalty. Tested with seccomp and test_bpf testsuite in JIT/non-JIT mode and manual inspection of kernel_page_tables. Brad Spengler proposed the same idea via Twitter during development of this patch. Joint work with Hannes Frederic Sowa. Suggested-by: Brad Spengler <spender@grsecurity.net> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Kees Cook <keescook@chromium.org> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-02 20:53:44 +00:00
struct bpf_prog *bpf_prog_alloc(unsigned int size, gfp_t gfp_extra_flags)
{
gfp_t gfp_flags = GFP_KERNEL | __GFP_ZERO | gfp_extra_flags;
struct bpf_prog_aux *aux;
net: bpf: make eBPF interpreter images read-only With eBPF getting more extended and exposure to user space is on it's way, hardening the memory range the interpreter uses to steer its command flow seems appropriate. This patch moves the to be interpreted bytecode to read-only pages. In case we execute a corrupted BPF interpreter image for some reason e.g. caused by an attacker which got past a verifier stage, it would not only provide arbitrary read/write memory access but arbitrary function calls as well. After setting up the BPF interpreter image, its contents do not change until destruction time, thus we can setup the image on immutable made pages in order to mitigate modifications to that code. The idea is derived from commit 314beb9bcabf ("x86: bpf_jit_comp: secure bpf jit against spraying attacks"). This is possible because bpf_prog is not part of sk_filter anymore. After setup bpf_prog cannot be altered during its life-time. This prevents any modifications to the entire bpf_prog structure (incl. function/JIT image pointer). Every eBPF program (including classic BPF that are migrated) have to call bpf_prog_select_runtime() to select either interpreter or a JIT image as a last setup step, and they all are being freed via bpf_prog_free(), including non-JIT. Therefore, we can easily integrate this into the eBPF life-time, plus since we directly allocate a bpf_prog, we have no performance penalty. Tested with seccomp and test_bpf testsuite in JIT/non-JIT mode and manual inspection of kernel_page_tables. Brad Spengler proposed the same idea via Twitter during development of this patch. Joint work with Hannes Frederic Sowa. Suggested-by: Brad Spengler <spender@grsecurity.net> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Kees Cook <keescook@chromium.org> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-02 20:53:44 +00:00
struct bpf_prog *fp;
size = round_up(size, PAGE_SIZE);
fp = __vmalloc(size, gfp_flags, PAGE_KERNEL);
if (fp == NULL)
return NULL;
aux = kzalloc(sizeof(*aux), GFP_KERNEL | gfp_extra_flags);
if (aux == NULL) {
net: bpf: make eBPF interpreter images read-only With eBPF getting more extended and exposure to user space is on it's way, hardening the memory range the interpreter uses to steer its command flow seems appropriate. This patch moves the to be interpreted bytecode to read-only pages. In case we execute a corrupted BPF interpreter image for some reason e.g. caused by an attacker which got past a verifier stage, it would not only provide arbitrary read/write memory access but arbitrary function calls as well. After setting up the BPF interpreter image, its contents do not change until destruction time, thus we can setup the image on immutable made pages in order to mitigate modifications to that code. The idea is derived from commit 314beb9bcabf ("x86: bpf_jit_comp: secure bpf jit against spraying attacks"). This is possible because bpf_prog is not part of sk_filter anymore. After setup bpf_prog cannot be altered during its life-time. This prevents any modifications to the entire bpf_prog structure (incl. function/JIT image pointer). Every eBPF program (including classic BPF that are migrated) have to call bpf_prog_select_runtime() to select either interpreter or a JIT image as a last setup step, and they all are being freed via bpf_prog_free(), including non-JIT. Therefore, we can easily integrate this into the eBPF life-time, plus since we directly allocate a bpf_prog, we have no performance penalty. Tested with seccomp and test_bpf testsuite in JIT/non-JIT mode and manual inspection of kernel_page_tables. Brad Spengler proposed the same idea via Twitter during development of this patch. Joint work with Hannes Frederic Sowa. Suggested-by: Brad Spengler <spender@grsecurity.net> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Kees Cook <keescook@chromium.org> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-02 20:53:44 +00:00
vfree(fp);
return NULL;
}
fp->pages = size / PAGE_SIZE;
fp->aux = aux;
fp->aux->prog = fp;
fp->jit_requested = ebpf_jit_enabled();
net: bpf: make eBPF interpreter images read-only With eBPF getting more extended and exposure to user space is on it's way, hardening the memory range the interpreter uses to steer its command flow seems appropriate. This patch moves the to be interpreted bytecode to read-only pages. In case we execute a corrupted BPF interpreter image for some reason e.g. caused by an attacker which got past a verifier stage, it would not only provide arbitrary read/write memory access but arbitrary function calls as well. After setting up the BPF interpreter image, its contents do not change until destruction time, thus we can setup the image on immutable made pages in order to mitigate modifications to that code. The idea is derived from commit 314beb9bcabf ("x86: bpf_jit_comp: secure bpf jit against spraying attacks"). This is possible because bpf_prog is not part of sk_filter anymore. After setup bpf_prog cannot be altered during its life-time. This prevents any modifications to the entire bpf_prog structure (incl. function/JIT image pointer). Every eBPF program (including classic BPF that are migrated) have to call bpf_prog_select_runtime() to select either interpreter or a JIT image as a last setup step, and they all are being freed via bpf_prog_free(), including non-JIT. Therefore, we can easily integrate this into the eBPF life-time, plus since we directly allocate a bpf_prog, we have no performance penalty. Tested with seccomp and test_bpf testsuite in JIT/non-JIT mode and manual inspection of kernel_page_tables. Brad Spengler proposed the same idea via Twitter during development of this patch. Joint work with Hannes Frederic Sowa. Suggested-by: Brad Spengler <spender@grsecurity.net> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Kees Cook <keescook@chromium.org> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-02 20:53:44 +00:00
bpf: make jited programs visible in traces Long standing issue with JITed programs is that stack traces from function tracing check whether a given address is kernel code through {__,}kernel_text_address(), which checks for code in core kernel, modules and dynamically allocated ftrace trampolines. But what is still missing is BPF JITed programs (interpreted programs are not an issue as __bpf_prog_run() will be attributed to them), thus when a stack trace is triggered, the code walking the stack won't see any of the JITed ones. The same for address correlation done from user space via reading /proc/kallsyms. This is read by tools like perf, but the latter is also useful for permanent live tracing with eBPF itself in combination with stack maps when other eBPF types are part of the callchain. See offwaketime example on dumping stack from a map. This work tries to tackle that issue by making the addresses and symbols known to the kernel. The lookup from *kernel_text_address() is implemented through a latched RB tree that can be read under RCU in fast-path that is also shared for symbol/size/offset lookup for a specific given address in kallsyms. The slow-path iteration through all symbols in the seq file done via RCU list, which holds a tiny fraction of all exported ksyms, usually below 0.1 percent. Function symbols are exported as bpf_prog_<tag>, in order to aide debugging and attribution. This facility is currently enabled for root-only when bpf_jit_kallsyms is set to 1, and disabled if hardening is active in any mode. The rationale behind this is that still a lot of systems ship with world read permissions on kallsyms thus addresses should not get suddenly exposed for them. If that situation gets much better in future, we always have the option to change the default on this. Likewise, unprivileged programs are not allowed to add entries there either, but that is less of a concern as most such programs types relevant in this context are for root-only anyway. If enabled, call graphs and stack traces will then show a correct attribution; one example is illustrated below, where the trace is now visible in tooling such as perf script --kallsyms=/proc/kallsyms and friends. Before: 7fff8166889d bpf_clone_redirect+0x80007f0020ed (/lib/modules/4.9.0-rc8+/build/vmlinux) f5d80 __sendmsg_nocancel+0xffff006451f1a007 (/usr/lib64/libc-2.18.so) After: 7fff816688b7 bpf_clone_redirect+0x80007f002107 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fffa0575728 bpf_prog_33c45a467c9e061a+0x8000600020fb (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fffa07ef1fc cls_bpf_classify+0x8000600020dc (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff81678b68 tc_classify+0x80007f002078 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff8164d40b __netif_receive_skb_core+0x80007f0025fb (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff8164d718 __netif_receive_skb+0x80007f002018 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff8164e565 process_backlog+0x80007f002095 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff8164dc71 net_rx_action+0x80007f002231 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff81767461 __softirqentry_text_start+0x80007f0020d1 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff817658ac do_softirq_own_stack+0x80007f00201c (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff810a2c20 do_softirq+0x80007f002050 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff810a2cb5 __local_bh_enable_ip+0x80007f002085 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff8168d452 ip_finish_output2+0x80007f002152 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff8168ea3d ip_finish_output+0x80007f00217d (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff8168f2af ip_output+0x80007f00203f (/lib/modules/4.9.0-rc8+/build/vmlinux) [...] 7fff81005854 do_syscall_64+0x80007f002054 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff817649eb return_from_SYSCALL_64+0x80007f002000 (/lib/modules/4.9.0-rc8+/build/vmlinux) f5d80 __sendmsg_nocancel+0xffff01c484812007 (/usr/lib64/libc-2.18.so) Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Cc: linux-kernel@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-16 21:24:50 +00:00
INIT_LIST_HEAD_RCU(&fp->aux->ksym_lnode);
net: bpf: make eBPF interpreter images read-only With eBPF getting more extended and exposure to user space is on it's way, hardening the memory range the interpreter uses to steer its command flow seems appropriate. This patch moves the to be interpreted bytecode to read-only pages. In case we execute a corrupted BPF interpreter image for some reason e.g. caused by an attacker which got past a verifier stage, it would not only provide arbitrary read/write memory access but arbitrary function calls as well. After setting up the BPF interpreter image, its contents do not change until destruction time, thus we can setup the image on immutable made pages in order to mitigate modifications to that code. The idea is derived from commit 314beb9bcabf ("x86: bpf_jit_comp: secure bpf jit against spraying attacks"). This is possible because bpf_prog is not part of sk_filter anymore. After setup bpf_prog cannot be altered during its life-time. This prevents any modifications to the entire bpf_prog structure (incl. function/JIT image pointer). Every eBPF program (including classic BPF that are migrated) have to call bpf_prog_select_runtime() to select either interpreter or a JIT image as a last setup step, and they all are being freed via bpf_prog_free(), including non-JIT. Therefore, we can easily integrate this into the eBPF life-time, plus since we directly allocate a bpf_prog, we have no performance penalty. Tested with seccomp and test_bpf testsuite in JIT/non-JIT mode and manual inspection of kernel_page_tables. Brad Spengler proposed the same idea via Twitter during development of this patch. Joint work with Hannes Frederic Sowa. Suggested-by: Brad Spengler <spender@grsecurity.net> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Kees Cook <keescook@chromium.org> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-02 20:53:44 +00:00
return fp;
}
EXPORT_SYMBOL_GPL(bpf_prog_alloc);
struct bpf_prog *bpf_prog_realloc(struct bpf_prog *fp_old, unsigned int size,
gfp_t gfp_extra_flags)
{
gfp_t gfp_flags = GFP_KERNEL | __GFP_ZERO | gfp_extra_flags;
net: bpf: make eBPF interpreter images read-only With eBPF getting more extended and exposure to user space is on it's way, hardening the memory range the interpreter uses to steer its command flow seems appropriate. This patch moves the to be interpreted bytecode to read-only pages. In case we execute a corrupted BPF interpreter image for some reason e.g. caused by an attacker which got past a verifier stage, it would not only provide arbitrary read/write memory access but arbitrary function calls as well. After setting up the BPF interpreter image, its contents do not change until destruction time, thus we can setup the image on immutable made pages in order to mitigate modifications to that code. The idea is derived from commit 314beb9bcabf ("x86: bpf_jit_comp: secure bpf jit against spraying attacks"). This is possible because bpf_prog is not part of sk_filter anymore. After setup bpf_prog cannot be altered during its life-time. This prevents any modifications to the entire bpf_prog structure (incl. function/JIT image pointer). Every eBPF program (including classic BPF that are migrated) have to call bpf_prog_select_runtime() to select either interpreter or a JIT image as a last setup step, and they all are being freed via bpf_prog_free(), including non-JIT. Therefore, we can easily integrate this into the eBPF life-time, plus since we directly allocate a bpf_prog, we have no performance penalty. Tested with seccomp and test_bpf testsuite in JIT/non-JIT mode and manual inspection of kernel_page_tables. Brad Spengler proposed the same idea via Twitter during development of this patch. Joint work with Hannes Frederic Sowa. Suggested-by: Brad Spengler <spender@grsecurity.net> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Kees Cook <keescook@chromium.org> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-02 20:53:44 +00:00
struct bpf_prog *fp;
bpf: fix overflow in prog accounting Commit aaac3ba95e4c ("bpf: charge user for creation of BPF maps and programs") made a wrong assumption of charging against prog->pages. Unlike map->pages, prog->pages are still subject to change when we need to expand the program through bpf_prog_realloc(). This can for example happen during verification stage when we need to expand and rewrite parts of the program. Should the required space cross a page boundary, then prog->pages is not the same anymore as its original value that we used to bpf_prog_charge_memlock() on. Thus, we'll hit a wrap-around during bpf_prog_uncharge_memlock() when prog is freed eventually. I noticed this that despite having unlimited memlock, programs suddenly refused to load with EPERM error due to insufficient memlock. There are two ways to fix this issue. One would be to add a cached variable to struct bpf_prog that takes a snapshot of prog->pages at the time of charging. The other approach is to also account for resizes. I chose to go with the latter for a couple of reasons: i) We want accounting rather to be more accurate instead of further fooling limits, ii) adding yet another page counter on struct bpf_prog would also be a waste just for this purpose. We also do want to charge as early as possible to avoid going into the verifier just to find out later on that we crossed limits. The only place that needs to be fixed is bpf_prog_realloc(), since only here we expand the program, so we try to account for the needed delta and should we fail, call-sites check for outcome anyway. On cBPF to eBPF migrations, we don't grab a reference to the user as they are charged differently. With that in place, my test case worked fine. Fixes: aaac3ba95e4c ("bpf: charge user for creation of BPF maps and programs") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-18 00:52:58 +00:00
u32 pages, delta;
int ret;
net: bpf: make eBPF interpreter images read-only With eBPF getting more extended and exposure to user space is on it's way, hardening the memory range the interpreter uses to steer its command flow seems appropriate. This patch moves the to be interpreted bytecode to read-only pages. In case we execute a corrupted BPF interpreter image for some reason e.g. caused by an attacker which got past a verifier stage, it would not only provide arbitrary read/write memory access but arbitrary function calls as well. After setting up the BPF interpreter image, its contents do not change until destruction time, thus we can setup the image on immutable made pages in order to mitigate modifications to that code. The idea is derived from commit 314beb9bcabf ("x86: bpf_jit_comp: secure bpf jit against spraying attacks"). This is possible because bpf_prog is not part of sk_filter anymore. After setup bpf_prog cannot be altered during its life-time. This prevents any modifications to the entire bpf_prog structure (incl. function/JIT image pointer). Every eBPF program (including classic BPF that are migrated) have to call bpf_prog_select_runtime() to select either interpreter or a JIT image as a last setup step, and they all are being freed via bpf_prog_free(), including non-JIT. Therefore, we can easily integrate this into the eBPF life-time, plus since we directly allocate a bpf_prog, we have no performance penalty. Tested with seccomp and test_bpf testsuite in JIT/non-JIT mode and manual inspection of kernel_page_tables. Brad Spengler proposed the same idea via Twitter during development of this patch. Joint work with Hannes Frederic Sowa. Suggested-by: Brad Spengler <spender@grsecurity.net> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Kees Cook <keescook@chromium.org> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-02 20:53:44 +00:00
BUG_ON(fp_old == NULL);
size = round_up(size, PAGE_SIZE);
bpf: fix overflow in prog accounting Commit aaac3ba95e4c ("bpf: charge user for creation of BPF maps and programs") made a wrong assumption of charging against prog->pages. Unlike map->pages, prog->pages are still subject to change when we need to expand the program through bpf_prog_realloc(). This can for example happen during verification stage when we need to expand and rewrite parts of the program. Should the required space cross a page boundary, then prog->pages is not the same anymore as its original value that we used to bpf_prog_charge_memlock() on. Thus, we'll hit a wrap-around during bpf_prog_uncharge_memlock() when prog is freed eventually. I noticed this that despite having unlimited memlock, programs suddenly refused to load with EPERM error due to insufficient memlock. There are two ways to fix this issue. One would be to add a cached variable to struct bpf_prog that takes a snapshot of prog->pages at the time of charging. The other approach is to also account for resizes. I chose to go with the latter for a couple of reasons: i) We want accounting rather to be more accurate instead of further fooling limits, ii) adding yet another page counter on struct bpf_prog would also be a waste just for this purpose. We also do want to charge as early as possible to avoid going into the verifier just to find out later on that we crossed limits. The only place that needs to be fixed is bpf_prog_realloc(), since only here we expand the program, so we try to account for the needed delta and should we fail, call-sites check for outcome anyway. On cBPF to eBPF migrations, we don't grab a reference to the user as they are charged differently. With that in place, my test case worked fine. Fixes: aaac3ba95e4c ("bpf: charge user for creation of BPF maps and programs") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-18 00:52:58 +00:00
pages = size / PAGE_SIZE;
if (pages <= fp_old->pages)
net: bpf: make eBPF interpreter images read-only With eBPF getting more extended and exposure to user space is on it's way, hardening the memory range the interpreter uses to steer its command flow seems appropriate. This patch moves the to be interpreted bytecode to read-only pages. In case we execute a corrupted BPF interpreter image for some reason e.g. caused by an attacker which got past a verifier stage, it would not only provide arbitrary read/write memory access but arbitrary function calls as well. After setting up the BPF interpreter image, its contents do not change until destruction time, thus we can setup the image on immutable made pages in order to mitigate modifications to that code. The idea is derived from commit 314beb9bcabf ("x86: bpf_jit_comp: secure bpf jit against spraying attacks"). This is possible because bpf_prog is not part of sk_filter anymore. After setup bpf_prog cannot be altered during its life-time. This prevents any modifications to the entire bpf_prog structure (incl. function/JIT image pointer). Every eBPF program (including classic BPF that are migrated) have to call bpf_prog_select_runtime() to select either interpreter or a JIT image as a last setup step, and they all are being freed via bpf_prog_free(), including non-JIT. Therefore, we can easily integrate this into the eBPF life-time, plus since we directly allocate a bpf_prog, we have no performance penalty. Tested with seccomp and test_bpf testsuite in JIT/non-JIT mode and manual inspection of kernel_page_tables. Brad Spengler proposed the same idea via Twitter during development of this patch. Joint work with Hannes Frederic Sowa. Suggested-by: Brad Spengler <spender@grsecurity.net> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Kees Cook <keescook@chromium.org> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-02 20:53:44 +00:00
return fp_old;
bpf: fix overflow in prog accounting Commit aaac3ba95e4c ("bpf: charge user for creation of BPF maps and programs") made a wrong assumption of charging against prog->pages. Unlike map->pages, prog->pages are still subject to change when we need to expand the program through bpf_prog_realloc(). This can for example happen during verification stage when we need to expand and rewrite parts of the program. Should the required space cross a page boundary, then prog->pages is not the same anymore as its original value that we used to bpf_prog_charge_memlock() on. Thus, we'll hit a wrap-around during bpf_prog_uncharge_memlock() when prog is freed eventually. I noticed this that despite having unlimited memlock, programs suddenly refused to load with EPERM error due to insufficient memlock. There are two ways to fix this issue. One would be to add a cached variable to struct bpf_prog that takes a snapshot of prog->pages at the time of charging. The other approach is to also account for resizes. I chose to go with the latter for a couple of reasons: i) We want accounting rather to be more accurate instead of further fooling limits, ii) adding yet another page counter on struct bpf_prog would also be a waste just for this purpose. We also do want to charge as early as possible to avoid going into the verifier just to find out later on that we crossed limits. The only place that needs to be fixed is bpf_prog_realloc(), since only here we expand the program, so we try to account for the needed delta and should we fail, call-sites check for outcome anyway. On cBPF to eBPF migrations, we don't grab a reference to the user as they are charged differently. With that in place, my test case worked fine. Fixes: aaac3ba95e4c ("bpf: charge user for creation of BPF maps and programs") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-18 00:52:58 +00:00
delta = pages - fp_old->pages;
ret = __bpf_prog_charge(fp_old->aux->user, delta);
if (ret)
return NULL;
net: bpf: make eBPF interpreter images read-only With eBPF getting more extended and exposure to user space is on it's way, hardening the memory range the interpreter uses to steer its command flow seems appropriate. This patch moves the to be interpreted bytecode to read-only pages. In case we execute a corrupted BPF interpreter image for some reason e.g. caused by an attacker which got past a verifier stage, it would not only provide arbitrary read/write memory access but arbitrary function calls as well. After setting up the BPF interpreter image, its contents do not change until destruction time, thus we can setup the image on immutable made pages in order to mitigate modifications to that code. The idea is derived from commit 314beb9bcabf ("x86: bpf_jit_comp: secure bpf jit against spraying attacks"). This is possible because bpf_prog is not part of sk_filter anymore. After setup bpf_prog cannot be altered during its life-time. This prevents any modifications to the entire bpf_prog structure (incl. function/JIT image pointer). Every eBPF program (including classic BPF that are migrated) have to call bpf_prog_select_runtime() to select either interpreter or a JIT image as a last setup step, and they all are being freed via bpf_prog_free(), including non-JIT. Therefore, we can easily integrate this into the eBPF life-time, plus since we directly allocate a bpf_prog, we have no performance penalty. Tested with seccomp and test_bpf testsuite in JIT/non-JIT mode and manual inspection of kernel_page_tables. Brad Spengler proposed the same idea via Twitter during development of this patch. Joint work with Hannes Frederic Sowa. Suggested-by: Brad Spengler <spender@grsecurity.net> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Kees Cook <keescook@chromium.org> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-02 20:53:44 +00:00
fp = __vmalloc(size, gfp_flags, PAGE_KERNEL);
bpf: fix overflow in prog accounting Commit aaac3ba95e4c ("bpf: charge user for creation of BPF maps and programs") made a wrong assumption of charging against prog->pages. Unlike map->pages, prog->pages are still subject to change when we need to expand the program through bpf_prog_realloc(). This can for example happen during verification stage when we need to expand and rewrite parts of the program. Should the required space cross a page boundary, then prog->pages is not the same anymore as its original value that we used to bpf_prog_charge_memlock() on. Thus, we'll hit a wrap-around during bpf_prog_uncharge_memlock() when prog is freed eventually. I noticed this that despite having unlimited memlock, programs suddenly refused to load with EPERM error due to insufficient memlock. There are two ways to fix this issue. One would be to add a cached variable to struct bpf_prog that takes a snapshot of prog->pages at the time of charging. The other approach is to also account for resizes. I chose to go with the latter for a couple of reasons: i) We want accounting rather to be more accurate instead of further fooling limits, ii) adding yet another page counter on struct bpf_prog would also be a waste just for this purpose. We also do want to charge as early as possible to avoid going into the verifier just to find out later on that we crossed limits. The only place that needs to be fixed is bpf_prog_realloc(), since only here we expand the program, so we try to account for the needed delta and should we fail, call-sites check for outcome anyway. On cBPF to eBPF migrations, we don't grab a reference to the user as they are charged differently. With that in place, my test case worked fine. Fixes: aaac3ba95e4c ("bpf: charge user for creation of BPF maps and programs") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-18 00:52:58 +00:00
if (fp == NULL) {
__bpf_prog_uncharge(fp_old->aux->user, delta);
} else {
net: bpf: make eBPF interpreter images read-only With eBPF getting more extended and exposure to user space is on it's way, hardening the memory range the interpreter uses to steer its command flow seems appropriate. This patch moves the to be interpreted bytecode to read-only pages. In case we execute a corrupted BPF interpreter image for some reason e.g. caused by an attacker which got past a verifier stage, it would not only provide arbitrary read/write memory access but arbitrary function calls as well. After setting up the BPF interpreter image, its contents do not change until destruction time, thus we can setup the image on immutable made pages in order to mitigate modifications to that code. The idea is derived from commit 314beb9bcabf ("x86: bpf_jit_comp: secure bpf jit against spraying attacks"). This is possible because bpf_prog is not part of sk_filter anymore. After setup bpf_prog cannot be altered during its life-time. This prevents any modifications to the entire bpf_prog structure (incl. function/JIT image pointer). Every eBPF program (including classic BPF that are migrated) have to call bpf_prog_select_runtime() to select either interpreter or a JIT image as a last setup step, and they all are being freed via bpf_prog_free(), including non-JIT. Therefore, we can easily integrate this into the eBPF life-time, plus since we directly allocate a bpf_prog, we have no performance penalty. Tested with seccomp and test_bpf testsuite in JIT/non-JIT mode and manual inspection of kernel_page_tables. Brad Spengler proposed the same idea via Twitter during development of this patch. Joint work with Hannes Frederic Sowa. Suggested-by: Brad Spengler <spender@grsecurity.net> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Kees Cook <keescook@chromium.org> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-02 20:53:44 +00:00
memcpy(fp, fp_old, fp_old->pages * PAGE_SIZE);
bpf: fix overflow in prog accounting Commit aaac3ba95e4c ("bpf: charge user for creation of BPF maps and programs") made a wrong assumption of charging against prog->pages. Unlike map->pages, prog->pages are still subject to change when we need to expand the program through bpf_prog_realloc(). This can for example happen during verification stage when we need to expand and rewrite parts of the program. Should the required space cross a page boundary, then prog->pages is not the same anymore as its original value that we used to bpf_prog_charge_memlock() on. Thus, we'll hit a wrap-around during bpf_prog_uncharge_memlock() when prog is freed eventually. I noticed this that despite having unlimited memlock, programs suddenly refused to load with EPERM error due to insufficient memlock. There are two ways to fix this issue. One would be to add a cached variable to struct bpf_prog that takes a snapshot of prog->pages at the time of charging. The other approach is to also account for resizes. I chose to go with the latter for a couple of reasons: i) We want accounting rather to be more accurate instead of further fooling limits, ii) adding yet another page counter on struct bpf_prog would also be a waste just for this purpose. We also do want to charge as early as possible to avoid going into the verifier just to find out later on that we crossed limits. The only place that needs to be fixed is bpf_prog_realloc(), since only here we expand the program, so we try to account for the needed delta and should we fail, call-sites check for outcome anyway. On cBPF to eBPF migrations, we don't grab a reference to the user as they are charged differently. With that in place, my test case worked fine. Fixes: aaac3ba95e4c ("bpf: charge user for creation of BPF maps and programs") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-18 00:52:58 +00:00
fp->pages = pages;
fp->aux->prog = fp;
net: bpf: make eBPF interpreter images read-only With eBPF getting more extended and exposure to user space is on it's way, hardening the memory range the interpreter uses to steer its command flow seems appropriate. This patch moves the to be interpreted bytecode to read-only pages. In case we execute a corrupted BPF interpreter image for some reason e.g. caused by an attacker which got past a verifier stage, it would not only provide arbitrary read/write memory access but arbitrary function calls as well. After setting up the BPF interpreter image, its contents do not change until destruction time, thus we can setup the image on immutable made pages in order to mitigate modifications to that code. The idea is derived from commit 314beb9bcabf ("x86: bpf_jit_comp: secure bpf jit against spraying attacks"). This is possible because bpf_prog is not part of sk_filter anymore. After setup bpf_prog cannot be altered during its life-time. This prevents any modifications to the entire bpf_prog structure (incl. function/JIT image pointer). Every eBPF program (including classic BPF that are migrated) have to call bpf_prog_select_runtime() to select either interpreter or a JIT image as a last setup step, and they all are being freed via bpf_prog_free(), including non-JIT. Therefore, we can easily integrate this into the eBPF life-time, plus since we directly allocate a bpf_prog, we have no performance penalty. Tested with seccomp and test_bpf testsuite in JIT/non-JIT mode and manual inspection of kernel_page_tables. Brad Spengler proposed the same idea via Twitter during development of this patch. Joint work with Hannes Frederic Sowa. Suggested-by: Brad Spengler <spender@grsecurity.net> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Kees Cook <keescook@chromium.org> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-02 20:53:44 +00:00
/* We keep fp->aux from fp_old around in the new
net: bpf: make eBPF interpreter images read-only With eBPF getting more extended and exposure to user space is on it's way, hardening the memory range the interpreter uses to steer its command flow seems appropriate. This patch moves the to be interpreted bytecode to read-only pages. In case we execute a corrupted BPF interpreter image for some reason e.g. caused by an attacker which got past a verifier stage, it would not only provide arbitrary read/write memory access but arbitrary function calls as well. After setting up the BPF interpreter image, its contents do not change until destruction time, thus we can setup the image on immutable made pages in order to mitigate modifications to that code. The idea is derived from commit 314beb9bcabf ("x86: bpf_jit_comp: secure bpf jit against spraying attacks"). This is possible because bpf_prog is not part of sk_filter anymore. After setup bpf_prog cannot be altered during its life-time. This prevents any modifications to the entire bpf_prog structure (incl. function/JIT image pointer). Every eBPF program (including classic BPF that are migrated) have to call bpf_prog_select_runtime() to select either interpreter or a JIT image as a last setup step, and they all are being freed via bpf_prog_free(), including non-JIT. Therefore, we can easily integrate this into the eBPF life-time, plus since we directly allocate a bpf_prog, we have no performance penalty. Tested with seccomp and test_bpf testsuite in JIT/non-JIT mode and manual inspection of kernel_page_tables. Brad Spengler proposed the same idea via Twitter during development of this patch. Joint work with Hannes Frederic Sowa. Suggested-by: Brad Spengler <spender@grsecurity.net> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Kees Cook <keescook@chromium.org> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-02 20:53:44 +00:00
* reallocated structure.
*/
fp_old->aux = NULL;
net: bpf: make eBPF interpreter images read-only With eBPF getting more extended and exposure to user space is on it's way, hardening the memory range the interpreter uses to steer its command flow seems appropriate. This patch moves the to be interpreted bytecode to read-only pages. In case we execute a corrupted BPF interpreter image for some reason e.g. caused by an attacker which got past a verifier stage, it would not only provide arbitrary read/write memory access but arbitrary function calls as well. After setting up the BPF interpreter image, its contents do not change until destruction time, thus we can setup the image on immutable made pages in order to mitigate modifications to that code. The idea is derived from commit 314beb9bcabf ("x86: bpf_jit_comp: secure bpf jit against spraying attacks"). This is possible because bpf_prog is not part of sk_filter anymore. After setup bpf_prog cannot be altered during its life-time. This prevents any modifications to the entire bpf_prog structure (incl. function/JIT image pointer). Every eBPF program (including classic BPF that are migrated) have to call bpf_prog_select_runtime() to select either interpreter or a JIT image as a last setup step, and they all are being freed via bpf_prog_free(), including non-JIT. Therefore, we can easily integrate this into the eBPF life-time, plus since we directly allocate a bpf_prog, we have no performance penalty. Tested with seccomp and test_bpf testsuite in JIT/non-JIT mode and manual inspection of kernel_page_tables. Brad Spengler proposed the same idea via Twitter during development of this patch. Joint work with Hannes Frederic Sowa. Suggested-by: Brad Spengler <spender@grsecurity.net> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Kees Cook <keescook@chromium.org> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-02 20:53:44 +00:00
__bpf_prog_free(fp_old);
}
return fp;
}
void __bpf_prog_free(struct bpf_prog *fp)
{
kfree(fp->aux);
net: bpf: make eBPF interpreter images read-only With eBPF getting more extended and exposure to user space is on it's way, hardening the memory range the interpreter uses to steer its command flow seems appropriate. This patch moves the to be interpreted bytecode to read-only pages. In case we execute a corrupted BPF interpreter image for some reason e.g. caused by an attacker which got past a verifier stage, it would not only provide arbitrary read/write memory access but arbitrary function calls as well. After setting up the BPF interpreter image, its contents do not change until destruction time, thus we can setup the image on immutable made pages in order to mitigate modifications to that code. The idea is derived from commit 314beb9bcabf ("x86: bpf_jit_comp: secure bpf jit against spraying attacks"). This is possible because bpf_prog is not part of sk_filter anymore. After setup bpf_prog cannot be altered during its life-time. This prevents any modifications to the entire bpf_prog structure (incl. function/JIT image pointer). Every eBPF program (including classic BPF that are migrated) have to call bpf_prog_select_runtime() to select either interpreter or a JIT image as a last setup step, and they all are being freed via bpf_prog_free(), including non-JIT. Therefore, we can easily integrate this into the eBPF life-time, plus since we directly allocate a bpf_prog, we have no performance penalty. Tested with seccomp and test_bpf testsuite in JIT/non-JIT mode and manual inspection of kernel_page_tables. Brad Spengler proposed the same idea via Twitter during development of this patch. Joint work with Hannes Frederic Sowa. Suggested-by: Brad Spengler <spender@grsecurity.net> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Kees Cook <keescook@chromium.org> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-02 20:53:44 +00:00
vfree(fp);
}
bpf: rework prog_digest into prog_tag Commit 7bd509e311f4 ("bpf: add prog_digest and expose it via fdinfo/netlink") was recently discussed, partially due to admittedly suboptimal name of "prog_digest" in combination with sha1 hash usage, thus inevitably and rightfully concerns about its security in terms of collision resistance were raised with regards to use-cases. The intended use cases are for debugging resp. introspection only for providing a stable "tag" over the instruction sequence that both kernel and user space can calculate independently. It's not usable at all for making a security relevant decision. So collisions where two different instruction sequences generate the same tag can happen, but ideally at a rather low rate. The "tag" will be dumped in hex and is short enough to introspect in tracepoints or kallsyms output along with other data such as stack trace, etc. Thus, this patch performs a rename into prog_tag and truncates the tag to a short output (64 bits) to make it obvious it's not collision-free. Should in future a hash or facility be needed with a security relevant focus, then we can think about requirements, constraints, etc that would fit to that situation. For now, rework the exposed parts for the current use cases as long as nothing has been released yet. Tested on x86_64 and s390x. Fixes: 7bd509e311f4 ("bpf: add prog_digest and expose it via fdinfo/netlink") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Cc: Andy Lutomirski <luto@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-13 22:38:15 +00:00
int bpf_prog_calc_tag(struct bpf_prog *fp)
{
const u32 bits_offset = SHA_MESSAGE_BYTES - sizeof(__be64);
bpf: rework prog_digest into prog_tag Commit 7bd509e311f4 ("bpf: add prog_digest and expose it via fdinfo/netlink") was recently discussed, partially due to admittedly suboptimal name of "prog_digest" in combination with sha1 hash usage, thus inevitably and rightfully concerns about its security in terms of collision resistance were raised with regards to use-cases. The intended use cases are for debugging resp. introspection only for providing a stable "tag" over the instruction sequence that both kernel and user space can calculate independently. It's not usable at all for making a security relevant decision. So collisions where two different instruction sequences generate the same tag can happen, but ideally at a rather low rate. The "tag" will be dumped in hex and is short enough to introspect in tracepoints or kallsyms output along with other data such as stack trace, etc. Thus, this patch performs a rename into prog_tag and truncates the tag to a short output (64 bits) to make it obvious it's not collision-free. Should in future a hash or facility be needed with a security relevant focus, then we can think about requirements, constraints, etc that would fit to that situation. For now, rework the exposed parts for the current use cases as long as nothing has been released yet. Tested on x86_64 and s390x. Fixes: 7bd509e311f4 ("bpf: add prog_digest and expose it via fdinfo/netlink") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Cc: Andy Lutomirski <luto@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-13 22:38:15 +00:00
u32 raw_size = bpf_prog_tag_scratch_size(fp);
u32 digest[SHA_DIGEST_WORDS];
u32 ws[SHA_WORKSPACE_WORDS];
u32 i, bsize, psize, blocks;
struct bpf_insn *dst;
bool was_ld_map;
u8 *raw, *todo;
__be32 *result;
__be64 *bits;
raw = vmalloc(raw_size);
if (!raw)
return -ENOMEM;
bpf: rework prog_digest into prog_tag Commit 7bd509e311f4 ("bpf: add prog_digest and expose it via fdinfo/netlink") was recently discussed, partially due to admittedly suboptimal name of "prog_digest" in combination with sha1 hash usage, thus inevitably and rightfully concerns about its security in terms of collision resistance were raised with regards to use-cases. The intended use cases are for debugging resp. introspection only for providing a stable "tag" over the instruction sequence that both kernel and user space can calculate independently. It's not usable at all for making a security relevant decision. So collisions where two different instruction sequences generate the same tag can happen, but ideally at a rather low rate. The "tag" will be dumped in hex and is short enough to introspect in tracepoints or kallsyms output along with other data such as stack trace, etc. Thus, this patch performs a rename into prog_tag and truncates the tag to a short output (64 bits) to make it obvious it's not collision-free. Should in future a hash or facility be needed with a security relevant focus, then we can think about requirements, constraints, etc that would fit to that situation. For now, rework the exposed parts for the current use cases as long as nothing has been released yet. Tested on x86_64 and s390x. Fixes: 7bd509e311f4 ("bpf: add prog_digest and expose it via fdinfo/netlink") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Cc: Andy Lutomirski <luto@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-13 22:38:15 +00:00
sha_init(digest);
memset(ws, 0, sizeof(ws));
/* We need to take out the map fd for the digest calculation
* since they are unstable from user space side.
*/
dst = (void *)raw;
for (i = 0, was_ld_map = false; i < fp->len; i++) {
dst[i] = fp->insnsi[i];
if (!was_ld_map &&
dst[i].code == (BPF_LD | BPF_IMM | BPF_DW) &&
dst[i].src_reg == BPF_PSEUDO_MAP_FD) {
was_ld_map = true;
dst[i].imm = 0;
} else if (was_ld_map &&
dst[i].code == 0 &&
dst[i].dst_reg == 0 &&
dst[i].src_reg == 0 &&
dst[i].off == 0) {
was_ld_map = false;
dst[i].imm = 0;
} else {
was_ld_map = false;
}
}
psize = bpf_prog_insn_size(fp);
memset(&raw[psize], 0, raw_size - psize);
raw[psize++] = 0x80;
bsize = round_up(psize, SHA_MESSAGE_BYTES);
blocks = bsize / SHA_MESSAGE_BYTES;
todo = raw;
if (bsize - psize >= sizeof(__be64)) {
bits = (__be64 *)(todo + bsize - sizeof(__be64));
} else {
bits = (__be64 *)(todo + bsize + bits_offset);
blocks++;
}
*bits = cpu_to_be64((psize - 1) << 3);
while (blocks--) {
bpf: rework prog_digest into prog_tag Commit 7bd509e311f4 ("bpf: add prog_digest and expose it via fdinfo/netlink") was recently discussed, partially due to admittedly suboptimal name of "prog_digest" in combination with sha1 hash usage, thus inevitably and rightfully concerns about its security in terms of collision resistance were raised with regards to use-cases. The intended use cases are for debugging resp. introspection only for providing a stable "tag" over the instruction sequence that both kernel and user space can calculate independently. It's not usable at all for making a security relevant decision. So collisions where two different instruction sequences generate the same tag can happen, but ideally at a rather low rate. The "tag" will be dumped in hex and is short enough to introspect in tracepoints or kallsyms output along with other data such as stack trace, etc. Thus, this patch performs a rename into prog_tag and truncates the tag to a short output (64 bits) to make it obvious it's not collision-free. Should in future a hash or facility be needed with a security relevant focus, then we can think about requirements, constraints, etc that would fit to that situation. For now, rework the exposed parts for the current use cases as long as nothing has been released yet. Tested on x86_64 and s390x. Fixes: 7bd509e311f4 ("bpf: add prog_digest and expose it via fdinfo/netlink") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Cc: Andy Lutomirski <luto@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-13 22:38:15 +00:00
sha_transform(digest, todo, ws);
todo += SHA_MESSAGE_BYTES;
}
bpf: rework prog_digest into prog_tag Commit 7bd509e311f4 ("bpf: add prog_digest and expose it via fdinfo/netlink") was recently discussed, partially due to admittedly suboptimal name of "prog_digest" in combination with sha1 hash usage, thus inevitably and rightfully concerns about its security in terms of collision resistance were raised with regards to use-cases. The intended use cases are for debugging resp. introspection only for providing a stable "tag" over the instruction sequence that both kernel and user space can calculate independently. It's not usable at all for making a security relevant decision. So collisions where two different instruction sequences generate the same tag can happen, but ideally at a rather low rate. The "tag" will be dumped in hex and is short enough to introspect in tracepoints or kallsyms output along with other data such as stack trace, etc. Thus, this patch performs a rename into prog_tag and truncates the tag to a short output (64 bits) to make it obvious it's not collision-free. Should in future a hash or facility be needed with a security relevant focus, then we can think about requirements, constraints, etc that would fit to that situation. For now, rework the exposed parts for the current use cases as long as nothing has been released yet. Tested on x86_64 and s390x. Fixes: 7bd509e311f4 ("bpf: add prog_digest and expose it via fdinfo/netlink") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Cc: Andy Lutomirski <luto@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-13 22:38:15 +00:00
result = (__force __be32 *)digest;
for (i = 0; i < SHA_DIGEST_WORDS; i++)
bpf: rework prog_digest into prog_tag Commit 7bd509e311f4 ("bpf: add prog_digest and expose it via fdinfo/netlink") was recently discussed, partially due to admittedly suboptimal name of "prog_digest" in combination with sha1 hash usage, thus inevitably and rightfully concerns about its security in terms of collision resistance were raised with regards to use-cases. The intended use cases are for debugging resp. introspection only for providing a stable "tag" over the instruction sequence that both kernel and user space can calculate independently. It's not usable at all for making a security relevant decision. So collisions where two different instruction sequences generate the same tag can happen, but ideally at a rather low rate. The "tag" will be dumped in hex and is short enough to introspect in tracepoints or kallsyms output along with other data such as stack trace, etc. Thus, this patch performs a rename into prog_tag and truncates the tag to a short output (64 bits) to make it obvious it's not collision-free. Should in future a hash or facility be needed with a security relevant focus, then we can think about requirements, constraints, etc that would fit to that situation. For now, rework the exposed parts for the current use cases as long as nothing has been released yet. Tested on x86_64 and s390x. Fixes: 7bd509e311f4 ("bpf: add prog_digest and expose it via fdinfo/netlink") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Cc: Andy Lutomirski <luto@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-13 22:38:15 +00:00
result[i] = cpu_to_be32(digest[i]);
memcpy(fp->tag, result, sizeof(fp->tag));
vfree(raw);
return 0;
}
static void bpf_adj_branches(struct bpf_prog *prog, u32 pos, u32 delta)
{
struct bpf_insn *insn = prog->insnsi;
u32 i, insn_cnt = prog->len;
bool pseudo_call;
u8 code;
int off;
for (i = 0; i < insn_cnt; i++, insn++) {
code = insn->code;
if (BPF_CLASS(code) != BPF_JMP)
continue;
if (BPF_OP(code) == BPF_EXIT)
continue;
if (BPF_OP(code) == BPF_CALL) {
if (insn->src_reg == BPF_PSEUDO_CALL)
pseudo_call = true;
else
continue;
} else {
pseudo_call = false;
}
off = pseudo_call ? insn->imm : insn->off;
/* Adjust offset of jmps if we cross boundaries. */
if (i < pos && i + off + 1 > pos)
off += delta;
else if (i > pos + delta && i + off + 1 <= pos + delta)
off -= delta;
if (pseudo_call)
insn->imm = off;
else
insn->off = off;
}
}
struct bpf_prog *bpf_patch_insn_single(struct bpf_prog *prog, u32 off,
const struct bpf_insn *patch, u32 len)
{
u32 insn_adj_cnt, insn_rest, insn_delta = len - 1;
struct bpf_prog *prog_adj;
/* Since our patchlet doesn't expand the image, we're done. */
if (insn_delta == 0) {
memcpy(prog->insnsi + off, patch, sizeof(*patch));
return prog;
}
insn_adj_cnt = prog->len + insn_delta;
/* Several new instructions need to be inserted. Make room
* for them. Likely, there's no need for a new allocation as
* last page could have large enough tailroom.
*/
prog_adj = bpf_prog_realloc(prog, bpf_prog_size(insn_adj_cnt),
GFP_USER);
if (!prog_adj)
return NULL;
prog_adj->len = insn_adj_cnt;
/* Patching happens in 3 steps:
*
* 1) Move over tail of insnsi from next instruction onwards,
* so we can patch the single target insn with one or more
* new ones (patching is always from 1 to n insns, n > 0).
* 2) Inject new instructions at the target location.
* 3) Adjust branch offsets if necessary.
*/
insn_rest = insn_adj_cnt - off - len;
memmove(prog_adj->insnsi + off + len, prog_adj->insnsi + off + 1,
sizeof(*patch) * insn_rest);
memcpy(prog_adj->insnsi + off, patch, sizeof(*patch) * len);
bpf_adj_branches(prog_adj, off, insn_delta);
return prog_adj;
}
#ifdef CONFIG_BPF_JIT
bpf: make jited programs visible in traces Long standing issue with JITed programs is that stack traces from function tracing check whether a given address is kernel code through {__,}kernel_text_address(), which checks for code in core kernel, modules and dynamically allocated ftrace trampolines. But what is still missing is BPF JITed programs (interpreted programs are not an issue as __bpf_prog_run() will be attributed to them), thus when a stack trace is triggered, the code walking the stack won't see any of the JITed ones. The same for address correlation done from user space via reading /proc/kallsyms. This is read by tools like perf, but the latter is also useful for permanent live tracing with eBPF itself in combination with stack maps when other eBPF types are part of the callchain. See offwaketime example on dumping stack from a map. This work tries to tackle that issue by making the addresses and symbols known to the kernel. The lookup from *kernel_text_address() is implemented through a latched RB tree that can be read under RCU in fast-path that is also shared for symbol/size/offset lookup for a specific given address in kallsyms. The slow-path iteration through all symbols in the seq file done via RCU list, which holds a tiny fraction of all exported ksyms, usually below 0.1 percent. Function symbols are exported as bpf_prog_<tag>, in order to aide debugging and attribution. This facility is currently enabled for root-only when bpf_jit_kallsyms is set to 1, and disabled if hardening is active in any mode. The rationale behind this is that still a lot of systems ship with world read permissions on kallsyms thus addresses should not get suddenly exposed for them. If that situation gets much better in future, we always have the option to change the default on this. Likewise, unprivileged programs are not allowed to add entries there either, but that is less of a concern as most such programs types relevant in this context are for root-only anyway. If enabled, call graphs and stack traces will then show a correct attribution; one example is illustrated below, where the trace is now visible in tooling such as perf script --kallsyms=/proc/kallsyms and friends. Before: 7fff8166889d bpf_clone_redirect+0x80007f0020ed (/lib/modules/4.9.0-rc8+/build/vmlinux) f5d80 __sendmsg_nocancel+0xffff006451f1a007 (/usr/lib64/libc-2.18.so) After: 7fff816688b7 bpf_clone_redirect+0x80007f002107 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fffa0575728 bpf_prog_33c45a467c9e061a+0x8000600020fb (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fffa07ef1fc cls_bpf_classify+0x8000600020dc (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff81678b68 tc_classify+0x80007f002078 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff8164d40b __netif_receive_skb_core+0x80007f0025fb (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff8164d718 __netif_receive_skb+0x80007f002018 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff8164e565 process_backlog+0x80007f002095 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff8164dc71 net_rx_action+0x80007f002231 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff81767461 __softirqentry_text_start+0x80007f0020d1 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff817658ac do_softirq_own_stack+0x80007f00201c (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff810a2c20 do_softirq+0x80007f002050 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff810a2cb5 __local_bh_enable_ip+0x80007f002085 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff8168d452 ip_finish_output2+0x80007f002152 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff8168ea3d ip_finish_output+0x80007f00217d (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff8168f2af ip_output+0x80007f00203f (/lib/modules/4.9.0-rc8+/build/vmlinux) [...] 7fff81005854 do_syscall_64+0x80007f002054 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff817649eb return_from_SYSCALL_64+0x80007f002000 (/lib/modules/4.9.0-rc8+/build/vmlinux) f5d80 __sendmsg_nocancel+0xffff01c484812007 (/usr/lib64/libc-2.18.so) Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Cc: linux-kernel@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-16 21:24:50 +00:00
static __always_inline void
bpf_get_prog_addr_region(const struct bpf_prog *prog,
unsigned long *symbol_start,
unsigned long *symbol_end)
{
const struct bpf_binary_header *hdr = bpf_jit_binary_hdr(prog);
unsigned long addr = (unsigned long)hdr;
WARN_ON_ONCE(!bpf_prog_ebpf_jited(prog));
*symbol_start = addr;
*symbol_end = addr + hdr->pages * PAGE_SIZE;
}
static void bpf_get_prog_name(const struct bpf_prog *prog, char *sym)
{
const char *end = sym + KSYM_NAME_LEN;
bpf: make jited programs visible in traces Long standing issue with JITed programs is that stack traces from function tracing check whether a given address is kernel code through {__,}kernel_text_address(), which checks for code in core kernel, modules and dynamically allocated ftrace trampolines. But what is still missing is BPF JITed programs (interpreted programs are not an issue as __bpf_prog_run() will be attributed to them), thus when a stack trace is triggered, the code walking the stack won't see any of the JITed ones. The same for address correlation done from user space via reading /proc/kallsyms. This is read by tools like perf, but the latter is also useful for permanent live tracing with eBPF itself in combination with stack maps when other eBPF types are part of the callchain. See offwaketime example on dumping stack from a map. This work tries to tackle that issue by making the addresses and symbols known to the kernel. The lookup from *kernel_text_address() is implemented through a latched RB tree that can be read under RCU in fast-path that is also shared for symbol/size/offset lookup for a specific given address in kallsyms. The slow-path iteration through all symbols in the seq file done via RCU list, which holds a tiny fraction of all exported ksyms, usually below 0.1 percent. Function symbols are exported as bpf_prog_<tag>, in order to aide debugging and attribution. This facility is currently enabled for root-only when bpf_jit_kallsyms is set to 1, and disabled if hardening is active in any mode. The rationale behind this is that still a lot of systems ship with world read permissions on kallsyms thus addresses should not get suddenly exposed for them. If that situation gets much better in future, we always have the option to change the default on this. Likewise, unprivileged programs are not allowed to add entries there either, but that is less of a concern as most such programs types relevant in this context are for root-only anyway. If enabled, call graphs and stack traces will then show a correct attribution; one example is illustrated below, where the trace is now visible in tooling such as perf script --kallsyms=/proc/kallsyms and friends. Before: 7fff8166889d bpf_clone_redirect+0x80007f0020ed (/lib/modules/4.9.0-rc8+/build/vmlinux) f5d80 __sendmsg_nocancel+0xffff006451f1a007 (/usr/lib64/libc-2.18.so) After: 7fff816688b7 bpf_clone_redirect+0x80007f002107 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fffa0575728 bpf_prog_33c45a467c9e061a+0x8000600020fb (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fffa07ef1fc cls_bpf_classify+0x8000600020dc (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff81678b68 tc_classify+0x80007f002078 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff8164d40b __netif_receive_skb_core+0x80007f0025fb (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff8164d718 __netif_receive_skb+0x80007f002018 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff8164e565 process_backlog+0x80007f002095 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff8164dc71 net_rx_action+0x80007f002231 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff81767461 __softirqentry_text_start+0x80007f0020d1 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff817658ac do_softirq_own_stack+0x80007f00201c (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff810a2c20 do_softirq+0x80007f002050 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff810a2cb5 __local_bh_enable_ip+0x80007f002085 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff8168d452 ip_finish_output2+0x80007f002152 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff8168ea3d ip_finish_output+0x80007f00217d (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff8168f2af ip_output+0x80007f00203f (/lib/modules/4.9.0-rc8+/build/vmlinux) [...] 7fff81005854 do_syscall_64+0x80007f002054 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff817649eb return_from_SYSCALL_64+0x80007f002000 (/lib/modules/4.9.0-rc8+/build/vmlinux) f5d80 __sendmsg_nocancel+0xffff01c484812007 (/usr/lib64/libc-2.18.so) Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Cc: linux-kernel@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-16 21:24:50 +00:00
BUILD_BUG_ON(sizeof("bpf_prog_") +
sizeof(prog->tag) * 2 +
/* name has been null terminated.
* We should need +1 for the '_' preceding
* the name. However, the null character
* is double counted between the name and the
* sizeof("bpf_prog_") above, so we omit
* the +1 here.
*/
sizeof(prog->aux->name) > KSYM_NAME_LEN);
bpf: make jited programs visible in traces Long standing issue with JITed programs is that stack traces from function tracing check whether a given address is kernel code through {__,}kernel_text_address(), which checks for code in core kernel, modules and dynamically allocated ftrace trampolines. But what is still missing is BPF JITed programs (interpreted programs are not an issue as __bpf_prog_run() will be attributed to them), thus when a stack trace is triggered, the code walking the stack won't see any of the JITed ones. The same for address correlation done from user space via reading /proc/kallsyms. This is read by tools like perf, but the latter is also useful for permanent live tracing with eBPF itself in combination with stack maps when other eBPF types are part of the callchain. See offwaketime example on dumping stack from a map. This work tries to tackle that issue by making the addresses and symbols known to the kernel. The lookup from *kernel_text_address() is implemented through a latched RB tree that can be read under RCU in fast-path that is also shared for symbol/size/offset lookup for a specific given address in kallsyms. The slow-path iteration through all symbols in the seq file done via RCU list, which holds a tiny fraction of all exported ksyms, usually below 0.1 percent. Function symbols are exported as bpf_prog_<tag>, in order to aide debugging and attribution. This facility is currently enabled for root-only when bpf_jit_kallsyms is set to 1, and disabled if hardening is active in any mode. The rationale behind this is that still a lot of systems ship with world read permissions on kallsyms thus addresses should not get suddenly exposed for them. If that situation gets much better in future, we always have the option to change the default on this. Likewise, unprivileged programs are not allowed to add entries there either, but that is less of a concern as most such programs types relevant in this context are for root-only anyway. If enabled, call graphs and stack traces will then show a correct attribution; one example is illustrated below, where the trace is now visible in tooling such as perf script --kallsyms=/proc/kallsyms and friends. Before: 7fff8166889d bpf_clone_redirect+0x80007f0020ed (/lib/modules/4.9.0-rc8+/build/vmlinux) f5d80 __sendmsg_nocancel+0xffff006451f1a007 (/usr/lib64/libc-2.18.so) After: 7fff816688b7 bpf_clone_redirect+0x80007f002107 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fffa0575728 bpf_prog_33c45a467c9e061a+0x8000600020fb (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fffa07ef1fc cls_bpf_classify+0x8000600020dc (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff81678b68 tc_classify+0x80007f002078 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff8164d40b __netif_receive_skb_core+0x80007f0025fb (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff8164d718 __netif_receive_skb+0x80007f002018 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff8164e565 process_backlog+0x80007f002095 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff8164dc71 net_rx_action+0x80007f002231 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff81767461 __softirqentry_text_start+0x80007f0020d1 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff817658ac do_softirq_own_stack+0x80007f00201c (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff810a2c20 do_softirq+0x80007f002050 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff810a2cb5 __local_bh_enable_ip+0x80007f002085 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff8168d452 ip_finish_output2+0x80007f002152 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff8168ea3d ip_finish_output+0x80007f00217d (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff8168f2af ip_output+0x80007f00203f (/lib/modules/4.9.0-rc8+/build/vmlinux) [...] 7fff81005854 do_syscall_64+0x80007f002054 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff817649eb return_from_SYSCALL_64+0x80007f002000 (/lib/modules/4.9.0-rc8+/build/vmlinux) f5d80 __sendmsg_nocancel+0xffff01c484812007 (/usr/lib64/libc-2.18.so) Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Cc: linux-kernel@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-16 21:24:50 +00:00
sym += snprintf(sym, KSYM_NAME_LEN, "bpf_prog_");
sym = bin2hex(sym, prog->tag, sizeof(prog->tag));
if (prog->aux->name[0])
snprintf(sym, (size_t)(end - sym), "_%s", prog->aux->name);
else
*sym = 0;
bpf: make jited programs visible in traces Long standing issue with JITed programs is that stack traces from function tracing check whether a given address is kernel code through {__,}kernel_text_address(), which checks for code in core kernel, modules and dynamically allocated ftrace trampolines. But what is still missing is BPF JITed programs (interpreted programs are not an issue as __bpf_prog_run() will be attributed to them), thus when a stack trace is triggered, the code walking the stack won't see any of the JITed ones. The same for address correlation done from user space via reading /proc/kallsyms. This is read by tools like perf, but the latter is also useful for permanent live tracing with eBPF itself in combination with stack maps when other eBPF types are part of the callchain. See offwaketime example on dumping stack from a map. This work tries to tackle that issue by making the addresses and symbols known to the kernel. The lookup from *kernel_text_address() is implemented through a latched RB tree that can be read under RCU in fast-path that is also shared for symbol/size/offset lookup for a specific given address in kallsyms. The slow-path iteration through all symbols in the seq file done via RCU list, which holds a tiny fraction of all exported ksyms, usually below 0.1 percent. Function symbols are exported as bpf_prog_<tag>, in order to aide debugging and attribution. This facility is currently enabled for root-only when bpf_jit_kallsyms is set to 1, and disabled if hardening is active in any mode. The rationale behind this is that still a lot of systems ship with world read permissions on kallsyms thus addresses should not get suddenly exposed for them. If that situation gets much better in future, we always have the option to change the default on this. Likewise, unprivileged programs are not allowed to add entries there either, but that is less of a concern as most such programs types relevant in this context are for root-only anyway. If enabled, call graphs and stack traces will then show a correct attribution; one example is illustrated below, where the trace is now visible in tooling such as perf script --kallsyms=/proc/kallsyms and friends. Before: 7fff8166889d bpf_clone_redirect+0x80007f0020ed (/lib/modules/4.9.0-rc8+/build/vmlinux) f5d80 __sendmsg_nocancel+0xffff006451f1a007 (/usr/lib64/libc-2.18.so) After: 7fff816688b7 bpf_clone_redirect+0x80007f002107 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fffa0575728 bpf_prog_33c45a467c9e061a+0x8000600020fb (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fffa07ef1fc cls_bpf_classify+0x8000600020dc (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff81678b68 tc_classify+0x80007f002078 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff8164d40b __netif_receive_skb_core+0x80007f0025fb (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff8164d718 __netif_receive_skb+0x80007f002018 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff8164e565 process_backlog+0x80007f002095 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff8164dc71 net_rx_action+0x80007f002231 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff81767461 __softirqentry_text_start+0x80007f0020d1 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff817658ac do_softirq_own_stack+0x80007f00201c (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff810a2c20 do_softirq+0x80007f002050 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff810a2cb5 __local_bh_enable_ip+0x80007f002085 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff8168d452 ip_finish_output2+0x80007f002152 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff8168ea3d ip_finish_output+0x80007f00217d (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff8168f2af ip_output+0x80007f00203f (/lib/modules/4.9.0-rc8+/build/vmlinux) [...] 7fff81005854 do_syscall_64+0x80007f002054 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff817649eb return_from_SYSCALL_64+0x80007f002000 (/lib/modules/4.9.0-rc8+/build/vmlinux) f5d80 __sendmsg_nocancel+0xffff01c484812007 (/usr/lib64/libc-2.18.so) Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Cc: linux-kernel@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-16 21:24:50 +00:00
}
static __always_inline unsigned long
bpf_get_prog_addr_start(struct latch_tree_node *n)
{
unsigned long symbol_start, symbol_end;
const struct bpf_prog_aux *aux;
aux = container_of(n, struct bpf_prog_aux, ksym_tnode);
bpf_get_prog_addr_region(aux->prog, &symbol_start, &symbol_end);
return symbol_start;
}
static __always_inline bool bpf_tree_less(struct latch_tree_node *a,
struct latch_tree_node *b)
{
return bpf_get_prog_addr_start(a) < bpf_get_prog_addr_start(b);
}
static __always_inline int bpf_tree_comp(void *key, struct latch_tree_node *n)
{
unsigned long val = (unsigned long)key;
unsigned long symbol_start, symbol_end;
const struct bpf_prog_aux *aux;
aux = container_of(n, struct bpf_prog_aux, ksym_tnode);
bpf_get_prog_addr_region(aux->prog, &symbol_start, &symbol_end);
if (val < symbol_start)
return -1;
if (val >= symbol_end)
return 1;
return 0;
}
static const struct latch_tree_ops bpf_tree_ops = {
.less = bpf_tree_less,
.comp = bpf_tree_comp,
};
static DEFINE_SPINLOCK(bpf_lock);
static LIST_HEAD(bpf_kallsyms);
static struct latch_tree_root bpf_tree __cacheline_aligned;
int bpf_jit_kallsyms __read_mostly;
static void bpf_prog_ksym_node_add(struct bpf_prog_aux *aux)
{
WARN_ON_ONCE(!list_empty(&aux->ksym_lnode));
list_add_tail_rcu(&aux->ksym_lnode, &bpf_kallsyms);
latch_tree_insert(&aux->ksym_tnode, &bpf_tree, &bpf_tree_ops);
}
static void bpf_prog_ksym_node_del(struct bpf_prog_aux *aux)
{
if (list_empty(&aux->ksym_lnode))
return;
latch_tree_erase(&aux->ksym_tnode, &bpf_tree, &bpf_tree_ops);
list_del_rcu(&aux->ksym_lnode);
}
static bool bpf_prog_kallsyms_candidate(const struct bpf_prog *fp)
{
return fp->jited && !bpf_prog_was_classic(fp);
}
static bool bpf_prog_kallsyms_verify_off(const struct bpf_prog *fp)
{
return list_empty(&fp->aux->ksym_lnode) ||
fp->aux->ksym_lnode.prev == LIST_POISON2;
}
void bpf_prog_kallsyms_add(struct bpf_prog *fp)
{
if (!bpf_prog_kallsyms_candidate(fp) ||
!capable(CAP_SYS_ADMIN))
return;
spin_lock_bh(&bpf_lock);
bpf: make jited programs visible in traces Long standing issue with JITed programs is that stack traces from function tracing check whether a given address is kernel code through {__,}kernel_text_address(), which checks for code in core kernel, modules and dynamically allocated ftrace trampolines. But what is still missing is BPF JITed programs (interpreted programs are not an issue as __bpf_prog_run() will be attributed to them), thus when a stack trace is triggered, the code walking the stack won't see any of the JITed ones. The same for address correlation done from user space via reading /proc/kallsyms. This is read by tools like perf, but the latter is also useful for permanent live tracing with eBPF itself in combination with stack maps when other eBPF types are part of the callchain. See offwaketime example on dumping stack from a map. This work tries to tackle that issue by making the addresses and symbols known to the kernel. The lookup from *kernel_text_address() is implemented through a latched RB tree that can be read under RCU in fast-path that is also shared for symbol/size/offset lookup for a specific given address in kallsyms. The slow-path iteration through all symbols in the seq file done via RCU list, which holds a tiny fraction of all exported ksyms, usually below 0.1 percent. Function symbols are exported as bpf_prog_<tag>, in order to aide debugging and attribution. This facility is currently enabled for root-only when bpf_jit_kallsyms is set to 1, and disabled if hardening is active in any mode. The rationale behind this is that still a lot of systems ship with world read permissions on kallsyms thus addresses should not get suddenly exposed for them. If that situation gets much better in future, we always have the option to change the default on this. Likewise, unprivileged programs are not allowed to add entries there either, but that is less of a concern as most such programs types relevant in this context are for root-only anyway. If enabled, call graphs and stack traces will then show a correct attribution; one example is illustrated below, where the trace is now visible in tooling such as perf script --kallsyms=/proc/kallsyms and friends. Before: 7fff8166889d bpf_clone_redirect+0x80007f0020ed (/lib/modules/4.9.0-rc8+/build/vmlinux) f5d80 __sendmsg_nocancel+0xffff006451f1a007 (/usr/lib64/libc-2.18.so) After: 7fff816688b7 bpf_clone_redirect+0x80007f002107 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fffa0575728 bpf_prog_33c45a467c9e061a+0x8000600020fb (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fffa07ef1fc cls_bpf_classify+0x8000600020dc (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff81678b68 tc_classify+0x80007f002078 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff8164d40b __netif_receive_skb_core+0x80007f0025fb (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff8164d718 __netif_receive_skb+0x80007f002018 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff8164e565 process_backlog+0x80007f002095 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff8164dc71 net_rx_action+0x80007f002231 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff81767461 __softirqentry_text_start+0x80007f0020d1 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff817658ac do_softirq_own_stack+0x80007f00201c (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff810a2c20 do_softirq+0x80007f002050 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff810a2cb5 __local_bh_enable_ip+0x80007f002085 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff8168d452 ip_finish_output2+0x80007f002152 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff8168ea3d ip_finish_output+0x80007f00217d (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff8168f2af ip_output+0x80007f00203f (/lib/modules/4.9.0-rc8+/build/vmlinux) [...] 7fff81005854 do_syscall_64+0x80007f002054 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff817649eb return_from_SYSCALL_64+0x80007f002000 (/lib/modules/4.9.0-rc8+/build/vmlinux) f5d80 __sendmsg_nocancel+0xffff01c484812007 (/usr/lib64/libc-2.18.so) Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Cc: linux-kernel@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-16 21:24:50 +00:00
bpf_prog_ksym_node_add(fp->aux);
spin_unlock_bh(&bpf_lock);
bpf: make jited programs visible in traces Long standing issue with JITed programs is that stack traces from function tracing check whether a given address is kernel code through {__,}kernel_text_address(), which checks for code in core kernel, modules and dynamically allocated ftrace trampolines. But what is still missing is BPF JITed programs (interpreted programs are not an issue as __bpf_prog_run() will be attributed to them), thus when a stack trace is triggered, the code walking the stack won't see any of the JITed ones. The same for address correlation done from user space via reading /proc/kallsyms. This is read by tools like perf, but the latter is also useful for permanent live tracing with eBPF itself in combination with stack maps when other eBPF types are part of the callchain. See offwaketime example on dumping stack from a map. This work tries to tackle that issue by making the addresses and symbols known to the kernel. The lookup from *kernel_text_address() is implemented through a latched RB tree that can be read under RCU in fast-path that is also shared for symbol/size/offset lookup for a specific given address in kallsyms. The slow-path iteration through all symbols in the seq file done via RCU list, which holds a tiny fraction of all exported ksyms, usually below 0.1 percent. Function symbols are exported as bpf_prog_<tag>, in order to aide debugging and attribution. This facility is currently enabled for root-only when bpf_jit_kallsyms is set to 1, and disabled if hardening is active in any mode. The rationale behind this is that still a lot of systems ship with world read permissions on kallsyms thus addresses should not get suddenly exposed for them. If that situation gets much better in future, we always have the option to change the default on this. Likewise, unprivileged programs are not allowed to add entries there either, but that is less of a concern as most such programs types relevant in this context are for root-only anyway. If enabled, call graphs and stack traces will then show a correct attribution; one example is illustrated below, where the trace is now visible in tooling such as perf script --kallsyms=/proc/kallsyms and friends. Before: 7fff8166889d bpf_clone_redirect+0x80007f0020ed (/lib/modules/4.9.0-rc8+/build/vmlinux) f5d80 __sendmsg_nocancel+0xffff006451f1a007 (/usr/lib64/libc-2.18.so) After: 7fff816688b7 bpf_clone_redirect+0x80007f002107 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fffa0575728 bpf_prog_33c45a467c9e061a+0x8000600020fb (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fffa07ef1fc cls_bpf_classify+0x8000600020dc (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff81678b68 tc_classify+0x80007f002078 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff8164d40b __netif_receive_skb_core+0x80007f0025fb (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff8164d718 __netif_receive_skb+0x80007f002018 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff8164e565 process_backlog+0x80007f002095 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff8164dc71 net_rx_action+0x80007f002231 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff81767461 __softirqentry_text_start+0x80007f0020d1 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff817658ac do_softirq_own_stack+0x80007f00201c (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff810a2c20 do_softirq+0x80007f002050 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff810a2cb5 __local_bh_enable_ip+0x80007f002085 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff8168d452 ip_finish_output2+0x80007f002152 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff8168ea3d ip_finish_output+0x80007f00217d (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff8168f2af ip_output+0x80007f00203f (/lib/modules/4.9.0-rc8+/build/vmlinux) [...] 7fff81005854 do_syscall_64+0x80007f002054 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff817649eb return_from_SYSCALL_64+0x80007f002000 (/lib/modules/4.9.0-rc8+/build/vmlinux) f5d80 __sendmsg_nocancel+0xffff01c484812007 (/usr/lib64/libc-2.18.so) Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Cc: linux-kernel@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-16 21:24:50 +00:00
}
void bpf_prog_kallsyms_del(struct bpf_prog *fp)
{
if (!bpf_prog_kallsyms_candidate(fp))
return;
spin_lock_bh(&bpf_lock);
bpf: make jited programs visible in traces Long standing issue with JITed programs is that stack traces from function tracing check whether a given address is kernel code through {__,}kernel_text_address(), which checks for code in core kernel, modules and dynamically allocated ftrace trampolines. But what is still missing is BPF JITed programs (interpreted programs are not an issue as __bpf_prog_run() will be attributed to them), thus when a stack trace is triggered, the code walking the stack won't see any of the JITed ones. The same for address correlation done from user space via reading /proc/kallsyms. This is read by tools like perf, but the latter is also useful for permanent live tracing with eBPF itself in combination with stack maps when other eBPF types are part of the callchain. See offwaketime example on dumping stack from a map. This work tries to tackle that issue by making the addresses and symbols known to the kernel. The lookup from *kernel_text_address() is implemented through a latched RB tree that can be read under RCU in fast-path that is also shared for symbol/size/offset lookup for a specific given address in kallsyms. The slow-path iteration through all symbols in the seq file done via RCU list, which holds a tiny fraction of all exported ksyms, usually below 0.1 percent. Function symbols are exported as bpf_prog_<tag>, in order to aide debugging and attribution. This facility is currently enabled for root-only when bpf_jit_kallsyms is set to 1, and disabled if hardening is active in any mode. The rationale behind this is that still a lot of systems ship with world read permissions on kallsyms thus addresses should not get suddenly exposed for them. If that situation gets much better in future, we always have the option to change the default on this. Likewise, unprivileged programs are not allowed to add entries there either, but that is less of a concern as most such programs types relevant in this context are for root-only anyway. If enabled, call graphs and stack traces will then show a correct attribution; one example is illustrated below, where the trace is now visible in tooling such as perf script --kallsyms=/proc/kallsyms and friends. Before: 7fff8166889d bpf_clone_redirect+0x80007f0020ed (/lib/modules/4.9.0-rc8+/build/vmlinux) f5d80 __sendmsg_nocancel+0xffff006451f1a007 (/usr/lib64/libc-2.18.so) After: 7fff816688b7 bpf_clone_redirect+0x80007f002107 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fffa0575728 bpf_prog_33c45a467c9e061a+0x8000600020fb (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fffa07ef1fc cls_bpf_classify+0x8000600020dc (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff81678b68 tc_classify+0x80007f002078 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff8164d40b __netif_receive_skb_core+0x80007f0025fb (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff8164d718 __netif_receive_skb+0x80007f002018 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff8164e565 process_backlog+0x80007f002095 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff8164dc71 net_rx_action+0x80007f002231 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff81767461 __softirqentry_text_start+0x80007f0020d1 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff817658ac do_softirq_own_stack+0x80007f00201c (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff810a2c20 do_softirq+0x80007f002050 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff810a2cb5 __local_bh_enable_ip+0x80007f002085 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff8168d452 ip_finish_output2+0x80007f002152 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff8168ea3d ip_finish_output+0x80007f00217d (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff8168f2af ip_output+0x80007f00203f (/lib/modules/4.9.0-rc8+/build/vmlinux) [...] 7fff81005854 do_syscall_64+0x80007f002054 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff817649eb return_from_SYSCALL_64+0x80007f002000 (/lib/modules/4.9.0-rc8+/build/vmlinux) f5d80 __sendmsg_nocancel+0xffff01c484812007 (/usr/lib64/libc-2.18.so) Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Cc: linux-kernel@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-16 21:24:50 +00:00
bpf_prog_ksym_node_del(fp->aux);
spin_unlock_bh(&bpf_lock);
bpf: make jited programs visible in traces Long standing issue with JITed programs is that stack traces from function tracing check whether a given address is kernel code through {__,}kernel_text_address(), which checks for code in core kernel, modules and dynamically allocated ftrace trampolines. But what is still missing is BPF JITed programs (interpreted programs are not an issue as __bpf_prog_run() will be attributed to them), thus when a stack trace is triggered, the code walking the stack won't see any of the JITed ones. The same for address correlation done from user space via reading /proc/kallsyms. This is read by tools like perf, but the latter is also useful for permanent live tracing with eBPF itself in combination with stack maps when other eBPF types are part of the callchain. See offwaketime example on dumping stack from a map. This work tries to tackle that issue by making the addresses and symbols known to the kernel. The lookup from *kernel_text_address() is implemented through a latched RB tree that can be read under RCU in fast-path that is also shared for symbol/size/offset lookup for a specific given address in kallsyms. The slow-path iteration through all symbols in the seq file done via RCU list, which holds a tiny fraction of all exported ksyms, usually below 0.1 percent. Function symbols are exported as bpf_prog_<tag>, in order to aide debugging and attribution. This facility is currently enabled for root-only when bpf_jit_kallsyms is set to 1, and disabled if hardening is active in any mode. The rationale behind this is that still a lot of systems ship with world read permissions on kallsyms thus addresses should not get suddenly exposed for them. If that situation gets much better in future, we always have the option to change the default on this. Likewise, unprivileged programs are not allowed to add entries there either, but that is less of a concern as most such programs types relevant in this context are for root-only anyway. If enabled, call graphs and stack traces will then show a correct attribution; one example is illustrated below, where the trace is now visible in tooling such as perf script --kallsyms=/proc/kallsyms and friends. Before: 7fff8166889d bpf_clone_redirect+0x80007f0020ed (/lib/modules/4.9.0-rc8+/build/vmlinux) f5d80 __sendmsg_nocancel+0xffff006451f1a007 (/usr/lib64/libc-2.18.so) After: 7fff816688b7 bpf_clone_redirect+0x80007f002107 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fffa0575728 bpf_prog_33c45a467c9e061a+0x8000600020fb (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fffa07ef1fc cls_bpf_classify+0x8000600020dc (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff81678b68 tc_classify+0x80007f002078 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff8164d40b __netif_receive_skb_core+0x80007f0025fb (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff8164d718 __netif_receive_skb+0x80007f002018 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff8164e565 process_backlog+0x80007f002095 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff8164dc71 net_rx_action+0x80007f002231 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff81767461 __softirqentry_text_start+0x80007f0020d1 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff817658ac do_softirq_own_stack+0x80007f00201c (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff810a2c20 do_softirq+0x80007f002050 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff810a2cb5 __local_bh_enable_ip+0x80007f002085 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff8168d452 ip_finish_output2+0x80007f002152 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff8168ea3d ip_finish_output+0x80007f00217d (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff8168f2af ip_output+0x80007f00203f (/lib/modules/4.9.0-rc8+/build/vmlinux) [...] 7fff81005854 do_syscall_64+0x80007f002054 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff817649eb return_from_SYSCALL_64+0x80007f002000 (/lib/modules/4.9.0-rc8+/build/vmlinux) f5d80 __sendmsg_nocancel+0xffff01c484812007 (/usr/lib64/libc-2.18.so) Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Cc: linux-kernel@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-16 21:24:50 +00:00
}
static struct bpf_prog *bpf_prog_kallsyms_find(unsigned long addr)
{
struct latch_tree_node *n;
if (!bpf_jit_kallsyms_enabled())
return NULL;
n = latch_tree_find((void *)addr, &bpf_tree, &bpf_tree_ops);
return n ?
container_of(n, struct bpf_prog_aux, ksym_tnode)->prog :
NULL;
}
const char *__bpf_address_lookup(unsigned long addr, unsigned long *size,
unsigned long *off, char *sym)
{
unsigned long symbol_start, symbol_end;
struct bpf_prog *prog;
char *ret = NULL;
rcu_read_lock();
prog = bpf_prog_kallsyms_find(addr);
if (prog) {
bpf_get_prog_addr_region(prog, &symbol_start, &symbol_end);
bpf_get_prog_name(prog, sym);
ret = sym;
if (size)
*size = symbol_end - symbol_start;
if (off)
*off = addr - symbol_start;
}
rcu_read_unlock();
return ret;
}
bool is_bpf_text_address(unsigned long addr)
{
bool ret;
rcu_read_lock();
ret = bpf_prog_kallsyms_find(addr) != NULL;
rcu_read_unlock();
return ret;
}
int bpf_get_kallsym(unsigned int symnum, unsigned long *value, char *type,
char *sym)
{
unsigned long symbol_start, symbol_end;
struct bpf_prog_aux *aux;
unsigned int it = 0;
int ret = -ERANGE;
if (!bpf_jit_kallsyms_enabled())
return ret;
rcu_read_lock();
list_for_each_entry_rcu(aux, &bpf_kallsyms, ksym_lnode) {
if (it++ != symnum)
continue;
bpf_get_prog_addr_region(aux->prog, &symbol_start, &symbol_end);
bpf_get_prog_name(aux->prog, sym);
*value = symbol_start;
*type = BPF_SYM_ELF_TYPE;
ret = 0;
break;
}
rcu_read_unlock();
return ret;
}
struct bpf_binary_header *
bpf_jit_binary_alloc(unsigned int proglen, u8 **image_ptr,
unsigned int alignment,
bpf_jit_fill_hole_t bpf_fill_ill_insns)
{
struct bpf_binary_header *hdr;
unsigned int size, hole, start;
/* Most of BPF filters are really small, but if some of them
* fill a page, allow at least 128 extra bytes to insert a
* random section of illegal instructions.
*/
size = round_up(proglen + sizeof(*hdr) + 128, PAGE_SIZE);
hdr = module_alloc(size);
if (hdr == NULL)
return NULL;
/* Fill space with illegal/arch-dep instructions. */
bpf_fill_ill_insns(hdr, size);
hdr->pages = size / PAGE_SIZE;
hole = min_t(unsigned int, size - (proglen + sizeof(*hdr)),
PAGE_SIZE - sizeof(*hdr));
start = (get_random_int() % hole) & ~(alignment - 1);
/* Leave a random number of instructions before BPF code. */
*image_ptr = &hdr->image[start];
return hdr;
}
void bpf_jit_binary_free(struct bpf_binary_header *hdr)
{
module_memfree(hdr);
}
bpf: add generic constant blinding for use in jits This work adds a generic facility for use from eBPF JIT compilers that allows for further hardening of JIT generated images through blinding constants. In response to the original work on BPF JIT spraying published by Keegan McAllister [1], most BPF JITs were changed to make images read-only and start at a randomized offset in the page, where the rest was filled with trap instructions. We have this nowadays in x86, arm, arm64 and s390 JIT compilers. Additionally, later work also made eBPF interpreter images read only for kernels supporting DEBUG_SET_MODULE_RONX, that is, x86, arm, arm64 and s390 archs as well currently. This is done by default for mentioned JITs when JITing is enabled. Furthermore, we had a generic and configurable constant blinding facility on our todo for quite some time now to further make spraying harder, and first implementation since around netconf 2016. We found that for systems where untrusted users can load cBPF/eBPF code where JIT is enabled, start offset randomization helps a bit to make jumps into crafted payload harder, but in case where larger programs that cross page boundary are injected, we again have some part of the program opcodes at a page start offset. With improved guessing and more reliable payload injection, chances can increase to jump into such payload. Elena Reshetova recently wrote a test case for it [2, 3]. Moreover, eBPF comes with 64 bit constants, which can leave some more room for payloads. Note that for all this, additional bugs in the kernel are still required to make the jump (and of course to guess right, to not jump into a trap) and naturally the JIT must be enabled, which is disabled by default. For helping mitigation, the general idea is to provide an option bpf_jit_harden that admins can tweak along with bpf_jit_enable, so that for cases where JIT should be enabled for performance reasons, the generated image can be further hardened with blinding constants for unpriviledged users (bpf_jit_harden == 1), with trading off performance for these, but not for privileged ones. We also added the option of blinding for all users (bpf_jit_harden == 2), which is quite helpful for testing f.e. with test_bpf.ko. There are no further e.g. hardening levels of bpf_jit_harden switch intended, rationale is to have it dead simple to use as on/off. Since this functionality would need to be duplicated over and over for JIT compilers to use, which are already complex enough, we provide a generic eBPF byte-code level based blinding implementation, which is then just transparently JITed. JIT compilers need to make only a few changes to integrate this facility and can be migrated one by one. This option is for eBPF JITs and will be used in x86, arm64, s390 without too much effort, and soon ppc64 JITs, thus that native eBPF can be blinded as well as cBPF to eBPF migrations, so that both can be covered with a single implementation. The rule for JITs is that bpf_jit_blind_constants() must be called from bpf_int_jit_compile(), and in case blinding is disabled, we follow normally with JITing the passed program. In case blinding is enabled and we fail during the process of blinding itself, we must return with the interpreter. Similarly, in case the JITing process after the blinding failed, we return normally to the interpreter with the non-blinded code. Meaning, interpreter doesn't change in any way and operates on eBPF code as usual. For doing this pre-JIT blinding step, we need to make use of a helper/auxiliary register, here BPF_REG_AX. This is strictly internal to the JIT and not in any way part of the eBPF architecture. Just like in the same way as JITs internally make use of some helper registers when emitting code, only that here the helper register is one abstraction level higher in eBPF bytecode, but nevertheless in JIT phase. That helper register is needed since f.e. manually written program can issue loads to all registers of eBPF architecture. The core concept with the additional register is: blind out all 32 and 64 bit constants by converting BPF_K based instructions into a small sequence from K_VAL into ((RND ^ K_VAL) ^ RND). Therefore, this is transformed into: BPF_REG_AX := (RND ^ K_VAL), BPF_REG_AX ^= RND, and REG <OP> BPF_REG_AX, so actual operation on the target register is translated from BPF_K into BPF_X one that is operating on BPF_REG_AX's content. During rewriting phase when blinding, RND is newly generated via prandom_u32() for each processed instruction. 64 bit loads are split into two 32 bit loads to make translation and patching not too complex. Only basic thing required by JITs is to call the helper bpf_jit_blind_constants()/bpf_jit_prog_release_other() pair, and to map BPF_REG_AX into an unused register. Small bpf_jit_disasm extract from [2] when applied to x86 JIT: echo 0 > /proc/sys/net/core/bpf_jit_harden ffffffffa034f5e9 + <x>: [...] 39: mov $0xa8909090,%eax 3e: mov $0xa8909090,%eax 43: mov $0xa8ff3148,%eax 48: mov $0xa89081b4,%eax 4d: mov $0xa8900bb0,%eax 52: mov $0xa810e0c1,%eax 57: mov $0xa8908eb4,%eax 5c: mov $0xa89020b0,%eax [...] echo 1 > /proc/sys/net/core/bpf_jit_harden ffffffffa034f1e5 + <x>: [...] 39: mov $0xe1192563,%r10d 3f: xor $0x4989b5f3,%r10d 46: mov %r10d,%eax 49: mov $0xb8296d93,%r10d 4f: xor $0x10b9fd03,%r10d 56: mov %r10d,%eax 59: mov $0x8c381146,%r10d 5f: xor $0x24c7200e,%r10d 66: mov %r10d,%eax 69: mov $0xeb2a830e,%r10d 6f: xor $0x43ba02ba,%r10d 76: mov %r10d,%eax 79: mov $0xd9730af,%r10d 7f: xor $0xa5073b1f,%r10d 86: mov %r10d,%eax 89: mov $0x9a45662b,%r10d 8f: xor $0x325586ea,%r10d 96: mov %r10d,%eax [...] As can be seen, original constants that carry payload are hidden when enabled, actual operations are transformed from constant-based to register-based ones, making jumps into constants ineffective. Above extract/example uses single BPF load instruction over and over, but of course all instructions with constants are blinded. Performance wise, JIT with blinding performs a bit slower than just JIT and faster than interpreter case. This is expected, since we still get all the performance benefits from JITing and in normal use-cases not every single instruction needs to be blinded. Summing up all 296 test cases averaged over multiple runs from test_bpf.ko suite, interpreter was 55% slower than JIT only and JIT with blinding was 8% slower than JIT only. Since there are also some extremes in the test suite, I expect for ordinary workloads that the performance for the JIT with blinding case is even closer to JIT only case, f.e. nmap test case from suite has averaged timings in ns 29 (JIT), 35 (+ blinding), and 151 (interpreter). BPF test suite, seccomp test suite, eBPF sample code and various bigger networking eBPF programs have been tested with this and were running fine. For testing purposes, I also adapted interpreter and redirected blinded eBPF image to interpreter and also here all tests pass. [1] http://mainisusuallyafunction.blogspot.com/2012/11/attacking-hardened-linux-systems-with.html [2] https://github.com/01org/jit-spray-poc-for-ksp/ [3] http://www.openwall.com/lists/kernel-hardening/2016/05/03/5 Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Elena Reshetova <elena.reshetova@intel.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-13 17:08:32 +00:00
bpf: make jited programs visible in traces Long standing issue with JITed programs is that stack traces from function tracing check whether a given address is kernel code through {__,}kernel_text_address(), which checks for code in core kernel, modules and dynamically allocated ftrace trampolines. But what is still missing is BPF JITed programs (interpreted programs are not an issue as __bpf_prog_run() will be attributed to them), thus when a stack trace is triggered, the code walking the stack won't see any of the JITed ones. The same for address correlation done from user space via reading /proc/kallsyms. This is read by tools like perf, but the latter is also useful for permanent live tracing with eBPF itself in combination with stack maps when other eBPF types are part of the callchain. See offwaketime example on dumping stack from a map. This work tries to tackle that issue by making the addresses and symbols known to the kernel. The lookup from *kernel_text_address() is implemented through a latched RB tree that can be read under RCU in fast-path that is also shared for symbol/size/offset lookup for a specific given address in kallsyms. The slow-path iteration through all symbols in the seq file done via RCU list, which holds a tiny fraction of all exported ksyms, usually below 0.1 percent. Function symbols are exported as bpf_prog_<tag>, in order to aide debugging and attribution. This facility is currently enabled for root-only when bpf_jit_kallsyms is set to 1, and disabled if hardening is active in any mode. The rationale behind this is that still a lot of systems ship with world read permissions on kallsyms thus addresses should not get suddenly exposed for them. If that situation gets much better in future, we always have the option to change the default on this. Likewise, unprivileged programs are not allowed to add entries there either, but that is less of a concern as most such programs types relevant in this context are for root-only anyway. If enabled, call graphs and stack traces will then show a correct attribution; one example is illustrated below, where the trace is now visible in tooling such as perf script --kallsyms=/proc/kallsyms and friends. Before: 7fff8166889d bpf_clone_redirect+0x80007f0020ed (/lib/modules/4.9.0-rc8+/build/vmlinux) f5d80 __sendmsg_nocancel+0xffff006451f1a007 (/usr/lib64/libc-2.18.so) After: 7fff816688b7 bpf_clone_redirect+0x80007f002107 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fffa0575728 bpf_prog_33c45a467c9e061a+0x8000600020fb (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fffa07ef1fc cls_bpf_classify+0x8000600020dc (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff81678b68 tc_classify+0x80007f002078 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff8164d40b __netif_receive_skb_core+0x80007f0025fb (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff8164d718 __netif_receive_skb+0x80007f002018 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff8164e565 process_backlog+0x80007f002095 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff8164dc71 net_rx_action+0x80007f002231 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff81767461 __softirqentry_text_start+0x80007f0020d1 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff817658ac do_softirq_own_stack+0x80007f00201c (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff810a2c20 do_softirq+0x80007f002050 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff810a2cb5 __local_bh_enable_ip+0x80007f002085 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff8168d452 ip_finish_output2+0x80007f002152 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff8168ea3d ip_finish_output+0x80007f00217d (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff8168f2af ip_output+0x80007f00203f (/lib/modules/4.9.0-rc8+/build/vmlinux) [...] 7fff81005854 do_syscall_64+0x80007f002054 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff817649eb return_from_SYSCALL_64+0x80007f002000 (/lib/modules/4.9.0-rc8+/build/vmlinux) f5d80 __sendmsg_nocancel+0xffff01c484812007 (/usr/lib64/libc-2.18.so) Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Cc: linux-kernel@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-16 21:24:50 +00:00
/* This symbol is only overridden by archs that have different
* requirements than the usual eBPF JITs, f.e. when they only
* implement cBPF JIT, do not set images read-only, etc.
*/
void __weak bpf_jit_free(struct bpf_prog *fp)
{
if (fp->jited) {
struct bpf_binary_header *hdr = bpf_jit_binary_hdr(fp);
bpf_jit_binary_unlock_ro(hdr);
bpf_jit_binary_free(hdr);
WARN_ON_ONCE(!bpf_prog_kallsyms_verify_off(fp));
}
bpf_prog_unlock_free(fp);
}
bpf: add generic constant blinding for use in jits This work adds a generic facility for use from eBPF JIT compilers that allows for further hardening of JIT generated images through blinding constants. In response to the original work on BPF JIT spraying published by Keegan McAllister [1], most BPF JITs were changed to make images read-only and start at a randomized offset in the page, where the rest was filled with trap instructions. We have this nowadays in x86, arm, arm64 and s390 JIT compilers. Additionally, later work also made eBPF interpreter images read only for kernels supporting DEBUG_SET_MODULE_RONX, that is, x86, arm, arm64 and s390 archs as well currently. This is done by default for mentioned JITs when JITing is enabled. Furthermore, we had a generic and configurable constant blinding facility on our todo for quite some time now to further make spraying harder, and first implementation since around netconf 2016. We found that for systems where untrusted users can load cBPF/eBPF code where JIT is enabled, start offset randomization helps a bit to make jumps into crafted payload harder, but in case where larger programs that cross page boundary are injected, we again have some part of the program opcodes at a page start offset. With improved guessing and more reliable payload injection, chances can increase to jump into such payload. Elena Reshetova recently wrote a test case for it [2, 3]. Moreover, eBPF comes with 64 bit constants, which can leave some more room for payloads. Note that for all this, additional bugs in the kernel are still required to make the jump (and of course to guess right, to not jump into a trap) and naturally the JIT must be enabled, which is disabled by default. For helping mitigation, the general idea is to provide an option bpf_jit_harden that admins can tweak along with bpf_jit_enable, so that for cases where JIT should be enabled for performance reasons, the generated image can be further hardened with blinding constants for unpriviledged users (bpf_jit_harden == 1), with trading off performance for these, but not for privileged ones. We also added the option of blinding for all users (bpf_jit_harden == 2), which is quite helpful for testing f.e. with test_bpf.ko. There are no further e.g. hardening levels of bpf_jit_harden switch intended, rationale is to have it dead simple to use as on/off. Since this functionality would need to be duplicated over and over for JIT compilers to use, which are already complex enough, we provide a generic eBPF byte-code level based blinding implementation, which is then just transparently JITed. JIT compilers need to make only a few changes to integrate this facility and can be migrated one by one. This option is for eBPF JITs and will be used in x86, arm64, s390 without too much effort, and soon ppc64 JITs, thus that native eBPF can be blinded as well as cBPF to eBPF migrations, so that both can be covered with a single implementation. The rule for JITs is that bpf_jit_blind_constants() must be called from bpf_int_jit_compile(), and in case blinding is disabled, we follow normally with JITing the passed program. In case blinding is enabled and we fail during the process of blinding itself, we must return with the interpreter. Similarly, in case the JITing process after the blinding failed, we return normally to the interpreter with the non-blinded code. Meaning, interpreter doesn't change in any way and operates on eBPF code as usual. For doing this pre-JIT blinding step, we need to make use of a helper/auxiliary register, here BPF_REG_AX. This is strictly internal to the JIT and not in any way part of the eBPF architecture. Just like in the same way as JITs internally make use of some helper registers when emitting code, only that here the helper register is one abstraction level higher in eBPF bytecode, but nevertheless in JIT phase. That helper register is needed since f.e. manually written program can issue loads to all registers of eBPF architecture. The core concept with the additional register is: blind out all 32 and 64 bit constants by converting BPF_K based instructions into a small sequence from K_VAL into ((RND ^ K_VAL) ^ RND). Therefore, this is transformed into: BPF_REG_AX := (RND ^ K_VAL), BPF_REG_AX ^= RND, and REG <OP> BPF_REG_AX, so actual operation on the target register is translated from BPF_K into BPF_X one that is operating on BPF_REG_AX's content. During rewriting phase when blinding, RND is newly generated via prandom_u32() for each processed instruction. 64 bit loads are split into two 32 bit loads to make translation and patching not too complex. Only basic thing required by JITs is to call the helper bpf_jit_blind_constants()/bpf_jit_prog_release_other() pair, and to map BPF_REG_AX into an unused register. Small bpf_jit_disasm extract from [2] when applied to x86 JIT: echo 0 > /proc/sys/net/core/bpf_jit_harden ffffffffa034f5e9 + <x>: [...] 39: mov $0xa8909090,%eax 3e: mov $0xa8909090,%eax 43: mov $0xa8ff3148,%eax 48: mov $0xa89081b4,%eax 4d: mov $0xa8900bb0,%eax 52: mov $0xa810e0c1,%eax 57: mov $0xa8908eb4,%eax 5c: mov $0xa89020b0,%eax [...] echo 1 > /proc/sys/net/core/bpf_jit_harden ffffffffa034f1e5 + <x>: [...] 39: mov $0xe1192563,%r10d 3f: xor $0x4989b5f3,%r10d 46: mov %r10d,%eax 49: mov $0xb8296d93,%r10d 4f: xor $0x10b9fd03,%r10d 56: mov %r10d,%eax 59: mov $0x8c381146,%r10d 5f: xor $0x24c7200e,%r10d 66: mov %r10d,%eax 69: mov $0xeb2a830e,%r10d 6f: xor $0x43ba02ba,%r10d 76: mov %r10d,%eax 79: mov $0xd9730af,%r10d 7f: xor $0xa5073b1f,%r10d 86: mov %r10d,%eax 89: mov $0x9a45662b,%r10d 8f: xor $0x325586ea,%r10d 96: mov %r10d,%eax [...] As can be seen, original constants that carry payload are hidden when enabled, actual operations are transformed from constant-based to register-based ones, making jumps into constants ineffective. Above extract/example uses single BPF load instruction over and over, but of course all instructions with constants are blinded. Performance wise, JIT with blinding performs a bit slower than just JIT and faster than interpreter case. This is expected, since we still get all the performance benefits from JITing and in normal use-cases not every single instruction needs to be blinded. Summing up all 296 test cases averaged over multiple runs from test_bpf.ko suite, interpreter was 55% slower than JIT only and JIT with blinding was 8% slower than JIT only. Since there are also some extremes in the test suite, I expect for ordinary workloads that the performance for the JIT with blinding case is even closer to JIT only case, f.e. nmap test case from suite has averaged timings in ns 29 (JIT), 35 (+ blinding), and 151 (interpreter). BPF test suite, seccomp test suite, eBPF sample code and various bigger networking eBPF programs have been tested with this and were running fine. For testing purposes, I also adapted interpreter and redirected blinded eBPF image to interpreter and also here all tests pass. [1] http://mainisusuallyafunction.blogspot.com/2012/11/attacking-hardened-linux-systems-with.html [2] https://github.com/01org/jit-spray-poc-for-ksp/ [3] http://www.openwall.com/lists/kernel-hardening/2016/05/03/5 Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Elena Reshetova <elena.reshetova@intel.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-13 17:08:32 +00:00
int bpf_jit_harden __read_mostly;
static int bpf_jit_blind_insn(const struct bpf_insn *from,
const struct bpf_insn *aux,
struct bpf_insn *to_buff)
{
struct bpf_insn *to = to_buff;
u32 imm_rnd = get_random_int();
bpf: add generic constant blinding for use in jits This work adds a generic facility for use from eBPF JIT compilers that allows for further hardening of JIT generated images through blinding constants. In response to the original work on BPF JIT spraying published by Keegan McAllister [1], most BPF JITs were changed to make images read-only and start at a randomized offset in the page, where the rest was filled with trap instructions. We have this nowadays in x86, arm, arm64 and s390 JIT compilers. Additionally, later work also made eBPF interpreter images read only for kernels supporting DEBUG_SET_MODULE_RONX, that is, x86, arm, arm64 and s390 archs as well currently. This is done by default for mentioned JITs when JITing is enabled. Furthermore, we had a generic and configurable constant blinding facility on our todo for quite some time now to further make spraying harder, and first implementation since around netconf 2016. We found that for systems where untrusted users can load cBPF/eBPF code where JIT is enabled, start offset randomization helps a bit to make jumps into crafted payload harder, but in case where larger programs that cross page boundary are injected, we again have some part of the program opcodes at a page start offset. With improved guessing and more reliable payload injection, chances can increase to jump into such payload. Elena Reshetova recently wrote a test case for it [2, 3]. Moreover, eBPF comes with 64 bit constants, which can leave some more room for payloads. Note that for all this, additional bugs in the kernel are still required to make the jump (and of course to guess right, to not jump into a trap) and naturally the JIT must be enabled, which is disabled by default. For helping mitigation, the general idea is to provide an option bpf_jit_harden that admins can tweak along with bpf_jit_enable, so that for cases where JIT should be enabled for performance reasons, the generated image can be further hardened with blinding constants for unpriviledged users (bpf_jit_harden == 1), with trading off performance for these, but not for privileged ones. We also added the option of blinding for all users (bpf_jit_harden == 2), which is quite helpful for testing f.e. with test_bpf.ko. There are no further e.g. hardening levels of bpf_jit_harden switch intended, rationale is to have it dead simple to use as on/off. Since this functionality would need to be duplicated over and over for JIT compilers to use, which are already complex enough, we provide a generic eBPF byte-code level based blinding implementation, which is then just transparently JITed. JIT compilers need to make only a few changes to integrate this facility and can be migrated one by one. This option is for eBPF JITs and will be used in x86, arm64, s390 without too much effort, and soon ppc64 JITs, thus that native eBPF can be blinded as well as cBPF to eBPF migrations, so that both can be covered with a single implementation. The rule for JITs is that bpf_jit_blind_constants() must be called from bpf_int_jit_compile(), and in case blinding is disabled, we follow normally with JITing the passed program. In case blinding is enabled and we fail during the process of blinding itself, we must return with the interpreter. Similarly, in case the JITing process after the blinding failed, we return normally to the interpreter with the non-blinded code. Meaning, interpreter doesn't change in any way and operates on eBPF code as usual. For doing this pre-JIT blinding step, we need to make use of a helper/auxiliary register, here BPF_REG_AX. This is strictly internal to the JIT and not in any way part of the eBPF architecture. Just like in the same way as JITs internally make use of some helper registers when emitting code, only that here the helper register is one abstraction level higher in eBPF bytecode, but nevertheless in JIT phase. That helper register is needed since f.e. manually written program can issue loads to all registers of eBPF architecture. The core concept with the additional register is: blind out all 32 and 64 bit constants by converting BPF_K based instructions into a small sequence from K_VAL into ((RND ^ K_VAL) ^ RND). Therefore, this is transformed into: BPF_REG_AX := (RND ^ K_VAL), BPF_REG_AX ^= RND, and REG <OP> BPF_REG_AX, so actual operation on the target register is translated from BPF_K into BPF_X one that is operating on BPF_REG_AX's content. During rewriting phase when blinding, RND is newly generated via prandom_u32() for each processed instruction. 64 bit loads are split into two 32 bit loads to make translation and patching not too complex. Only basic thing required by JITs is to call the helper bpf_jit_blind_constants()/bpf_jit_prog_release_other() pair, and to map BPF_REG_AX into an unused register. Small bpf_jit_disasm extract from [2] when applied to x86 JIT: echo 0 > /proc/sys/net/core/bpf_jit_harden ffffffffa034f5e9 + <x>: [...] 39: mov $0xa8909090,%eax 3e: mov $0xa8909090,%eax 43: mov $0xa8ff3148,%eax 48: mov $0xa89081b4,%eax 4d: mov $0xa8900bb0,%eax 52: mov $0xa810e0c1,%eax 57: mov $0xa8908eb4,%eax 5c: mov $0xa89020b0,%eax [...] echo 1 > /proc/sys/net/core/bpf_jit_harden ffffffffa034f1e5 + <x>: [...] 39: mov $0xe1192563,%r10d 3f: xor $0x4989b5f3,%r10d 46: mov %r10d,%eax 49: mov $0xb8296d93,%r10d 4f: xor $0x10b9fd03,%r10d 56: mov %r10d,%eax 59: mov $0x8c381146,%r10d 5f: xor $0x24c7200e,%r10d 66: mov %r10d,%eax 69: mov $0xeb2a830e,%r10d 6f: xor $0x43ba02ba,%r10d 76: mov %r10d,%eax 79: mov $0xd9730af,%r10d 7f: xor $0xa5073b1f,%r10d 86: mov %r10d,%eax 89: mov $0x9a45662b,%r10d 8f: xor $0x325586ea,%r10d 96: mov %r10d,%eax [...] As can be seen, original constants that carry payload are hidden when enabled, actual operations are transformed from constant-based to register-based ones, making jumps into constants ineffective. Above extract/example uses single BPF load instruction over and over, but of course all instructions with constants are blinded. Performance wise, JIT with blinding performs a bit slower than just JIT and faster than interpreter case. This is expected, since we still get all the performance benefits from JITing and in normal use-cases not every single instruction needs to be blinded. Summing up all 296 test cases averaged over multiple runs from test_bpf.ko suite, interpreter was 55% slower than JIT only and JIT with blinding was 8% slower than JIT only. Since there are also some extremes in the test suite, I expect for ordinary workloads that the performance for the JIT with blinding case is even closer to JIT only case, f.e. nmap test case from suite has averaged timings in ns 29 (JIT), 35 (+ blinding), and 151 (interpreter). BPF test suite, seccomp test suite, eBPF sample code and various bigger networking eBPF programs have been tested with this and were running fine. For testing purposes, I also adapted interpreter and redirected blinded eBPF image to interpreter and also here all tests pass. [1] http://mainisusuallyafunction.blogspot.com/2012/11/attacking-hardened-linux-systems-with.html [2] https://github.com/01org/jit-spray-poc-for-ksp/ [3] http://www.openwall.com/lists/kernel-hardening/2016/05/03/5 Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Elena Reshetova <elena.reshetova@intel.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-13 17:08:32 +00:00
s16 off;
BUILD_BUG_ON(BPF_REG_AX + 1 != MAX_BPF_JIT_REG);
BUILD_BUG_ON(MAX_BPF_REG + 1 != MAX_BPF_JIT_REG);
if (from->imm == 0 &&
(from->code == (BPF_ALU | BPF_MOV | BPF_K) ||
from->code == (BPF_ALU64 | BPF_MOV | BPF_K))) {
*to++ = BPF_ALU64_REG(BPF_XOR, from->dst_reg, from->dst_reg);
goto out;
}
switch (from->code) {
case BPF_ALU | BPF_ADD | BPF_K:
case BPF_ALU | BPF_SUB | BPF_K:
case BPF_ALU | BPF_AND | BPF_K:
case BPF_ALU | BPF_OR | BPF_K:
case BPF_ALU | BPF_XOR | BPF_K:
case BPF_ALU | BPF_MUL | BPF_K:
case BPF_ALU | BPF_MOV | BPF_K:
case BPF_ALU | BPF_DIV | BPF_K:
case BPF_ALU | BPF_MOD | BPF_K:
*to++ = BPF_ALU32_IMM(BPF_MOV, BPF_REG_AX, imm_rnd ^ from->imm);
*to++ = BPF_ALU32_IMM(BPF_XOR, BPF_REG_AX, imm_rnd);
*to++ = BPF_ALU32_REG(from->code, from->dst_reg, BPF_REG_AX);
break;
case BPF_ALU64 | BPF_ADD | BPF_K:
case BPF_ALU64 | BPF_SUB | BPF_K:
case BPF_ALU64 | BPF_AND | BPF_K:
case BPF_ALU64 | BPF_OR | BPF_K:
case BPF_ALU64 | BPF_XOR | BPF_K:
case BPF_ALU64 | BPF_MUL | BPF_K:
case BPF_ALU64 | BPF_MOV | BPF_K:
case BPF_ALU64 | BPF_DIV | BPF_K:
case BPF_ALU64 | BPF_MOD | BPF_K:
*to++ = BPF_ALU64_IMM(BPF_MOV, BPF_REG_AX, imm_rnd ^ from->imm);
*to++ = BPF_ALU64_IMM(BPF_XOR, BPF_REG_AX, imm_rnd);
*to++ = BPF_ALU64_REG(from->code, from->dst_reg, BPF_REG_AX);
break;
case BPF_JMP | BPF_JEQ | BPF_K:
case BPF_JMP | BPF_JNE | BPF_K:
case BPF_JMP | BPF_JGT | BPF_K:
bpf: add BPF_J{LT,LE,SLT,SLE} instructions Currently, eBPF only understands BPF_JGT (>), BPF_JGE (>=), BPF_JSGT (s>), BPF_JSGE (s>=) instructions, this means that particularly *JLT/*JLE counterparts involving immediates need to be rewritten from e.g. X < [IMM] by swapping arguments into [IMM] > X, meaning the immediate first is required to be loaded into a register Y := [IMM], such that then we can compare with Y > X. Note that the destination operand is always required to be a register. This has the downside of having unnecessarily increased register pressure, meaning complex program would need to spill other registers temporarily to stack in order to obtain an unused register for the [IMM]. Loading to registers will thus also affect state pruning since we need to account for that register use and potentially those registers that had to be spilled/filled again. As a consequence slightly more stack space might have been used due to spilling, and BPF programs are a bit longer due to extra code involving the register load and potentially required spill/fills. Thus, add BPF_JLT (<), BPF_JLE (<=), BPF_JSLT (s<), BPF_JSLE (s<=) counterparts to the eBPF instruction set. Modifying LLVM to remove the NegateCC() workaround in a PoC patch at [1] and allowing it to also emit the new instructions resulted in cilium's BPF programs that are injected into the fast-path to have a reduced program length in the range of 2-3% (e.g. accumulated main and tail call sections from one of the object file reduced from 4864 to 4729 insns), reduced complexity in the range of 10-30% (e.g. accumulated sections reduced in one of the cases from 116432 to 88428 insns), and reduced stack usage in the range of 1-5% (e.g. accumulated sections from one of the object files reduced from 824 to 784b). The modification for LLVM will be incorporated in a backwards compatible way. Plan is for LLVM to have i) a target specific option to offer a possibility to explicitly enable the extension by the user (as we have with -m target specific extensions today for various CPU insns), and ii) have the kernel checked for presence of the extensions and enable them transparently when the user is selecting more aggressive options such as -march=native in a bpf target context. (Other frontends generating BPF byte code, e.g. ply can probe the kernel directly for its code generation.) [1] https://github.com/borkmann/llvm/tree/bpf-insns Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-09 23:39:55 +00:00
case BPF_JMP | BPF_JLT | BPF_K:
bpf: add generic constant blinding for use in jits This work adds a generic facility for use from eBPF JIT compilers that allows for further hardening of JIT generated images through blinding constants. In response to the original work on BPF JIT spraying published by Keegan McAllister [1], most BPF JITs were changed to make images read-only and start at a randomized offset in the page, where the rest was filled with trap instructions. We have this nowadays in x86, arm, arm64 and s390 JIT compilers. Additionally, later work also made eBPF interpreter images read only for kernels supporting DEBUG_SET_MODULE_RONX, that is, x86, arm, arm64 and s390 archs as well currently. This is done by default for mentioned JITs when JITing is enabled. Furthermore, we had a generic and configurable constant blinding facility on our todo for quite some time now to further make spraying harder, and first implementation since around netconf 2016. We found that for systems where untrusted users can load cBPF/eBPF code where JIT is enabled, start offset randomization helps a bit to make jumps into crafted payload harder, but in case where larger programs that cross page boundary are injected, we again have some part of the program opcodes at a page start offset. With improved guessing and more reliable payload injection, chances can increase to jump into such payload. Elena Reshetova recently wrote a test case for it [2, 3]. Moreover, eBPF comes with 64 bit constants, which can leave some more room for payloads. Note that for all this, additional bugs in the kernel are still required to make the jump (and of course to guess right, to not jump into a trap) and naturally the JIT must be enabled, which is disabled by default. For helping mitigation, the general idea is to provide an option bpf_jit_harden that admins can tweak along with bpf_jit_enable, so that for cases where JIT should be enabled for performance reasons, the generated image can be further hardened with blinding constants for unpriviledged users (bpf_jit_harden == 1), with trading off performance for these, but not for privileged ones. We also added the option of blinding for all users (bpf_jit_harden == 2), which is quite helpful for testing f.e. with test_bpf.ko. There are no further e.g. hardening levels of bpf_jit_harden switch intended, rationale is to have it dead simple to use as on/off. Since this functionality would need to be duplicated over and over for JIT compilers to use, which are already complex enough, we provide a generic eBPF byte-code level based blinding implementation, which is then just transparently JITed. JIT compilers need to make only a few changes to integrate this facility and can be migrated one by one. This option is for eBPF JITs and will be used in x86, arm64, s390 without too much effort, and soon ppc64 JITs, thus that native eBPF can be blinded as well as cBPF to eBPF migrations, so that both can be covered with a single implementation. The rule for JITs is that bpf_jit_blind_constants() must be called from bpf_int_jit_compile(), and in case blinding is disabled, we follow normally with JITing the passed program. In case blinding is enabled and we fail during the process of blinding itself, we must return with the interpreter. Similarly, in case the JITing process after the blinding failed, we return normally to the interpreter with the non-blinded code. Meaning, interpreter doesn't change in any way and operates on eBPF code as usual. For doing this pre-JIT blinding step, we need to make use of a helper/auxiliary register, here BPF_REG_AX. This is strictly internal to the JIT and not in any way part of the eBPF architecture. Just like in the same way as JITs internally make use of some helper registers when emitting code, only that here the helper register is one abstraction level higher in eBPF bytecode, but nevertheless in JIT phase. That helper register is needed since f.e. manually written program can issue loads to all registers of eBPF architecture. The core concept with the additional register is: blind out all 32 and 64 bit constants by converting BPF_K based instructions into a small sequence from K_VAL into ((RND ^ K_VAL) ^ RND). Therefore, this is transformed into: BPF_REG_AX := (RND ^ K_VAL), BPF_REG_AX ^= RND, and REG <OP> BPF_REG_AX, so actual operation on the target register is translated from BPF_K into BPF_X one that is operating on BPF_REG_AX's content. During rewriting phase when blinding, RND is newly generated via prandom_u32() for each processed instruction. 64 bit loads are split into two 32 bit loads to make translation and patching not too complex. Only basic thing required by JITs is to call the helper bpf_jit_blind_constants()/bpf_jit_prog_release_other() pair, and to map BPF_REG_AX into an unused register. Small bpf_jit_disasm extract from [2] when applied to x86 JIT: echo 0 > /proc/sys/net/core/bpf_jit_harden ffffffffa034f5e9 + <x>: [...] 39: mov $0xa8909090,%eax 3e: mov $0xa8909090,%eax 43: mov $0xa8ff3148,%eax 48: mov $0xa89081b4,%eax 4d: mov $0xa8900bb0,%eax 52: mov $0xa810e0c1,%eax 57: mov $0xa8908eb4,%eax 5c: mov $0xa89020b0,%eax [...] echo 1 > /proc/sys/net/core/bpf_jit_harden ffffffffa034f1e5 + <x>: [...] 39: mov $0xe1192563,%r10d 3f: xor $0x4989b5f3,%r10d 46: mov %r10d,%eax 49: mov $0xb8296d93,%r10d 4f: xor $0x10b9fd03,%r10d 56: mov %r10d,%eax 59: mov $0x8c381146,%r10d 5f: xor $0x24c7200e,%r10d 66: mov %r10d,%eax 69: mov $0xeb2a830e,%r10d 6f: xor $0x43ba02ba,%r10d 76: mov %r10d,%eax 79: mov $0xd9730af,%r10d 7f: xor $0xa5073b1f,%r10d 86: mov %r10d,%eax 89: mov $0x9a45662b,%r10d 8f: xor $0x325586ea,%r10d 96: mov %r10d,%eax [...] As can be seen, original constants that carry payload are hidden when enabled, actual operations are transformed from constant-based to register-based ones, making jumps into constants ineffective. Above extract/example uses single BPF load instruction over and over, but of course all instructions with constants are blinded. Performance wise, JIT with blinding performs a bit slower than just JIT and faster than interpreter case. This is expected, since we still get all the performance benefits from JITing and in normal use-cases not every single instruction needs to be blinded. Summing up all 296 test cases averaged over multiple runs from test_bpf.ko suite, interpreter was 55% slower than JIT only and JIT with blinding was 8% slower than JIT only. Since there are also some extremes in the test suite, I expect for ordinary workloads that the performance for the JIT with blinding case is even closer to JIT only case, f.e. nmap test case from suite has averaged timings in ns 29 (JIT), 35 (+ blinding), and 151 (interpreter). BPF test suite, seccomp test suite, eBPF sample code and various bigger networking eBPF programs have been tested with this and were running fine. For testing purposes, I also adapted interpreter and redirected blinded eBPF image to interpreter and also here all tests pass. [1] http://mainisusuallyafunction.blogspot.com/2012/11/attacking-hardened-linux-systems-with.html [2] https://github.com/01org/jit-spray-poc-for-ksp/ [3] http://www.openwall.com/lists/kernel-hardening/2016/05/03/5 Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Elena Reshetova <elena.reshetova@intel.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-13 17:08:32 +00:00
case BPF_JMP | BPF_JGE | BPF_K:
bpf: add BPF_J{LT,LE,SLT,SLE} instructions Currently, eBPF only understands BPF_JGT (>), BPF_JGE (>=), BPF_JSGT (s>), BPF_JSGE (s>=) instructions, this means that particularly *JLT/*JLE counterparts involving immediates need to be rewritten from e.g. X < [IMM] by swapping arguments into [IMM] > X, meaning the immediate first is required to be loaded into a register Y := [IMM], such that then we can compare with Y > X. Note that the destination operand is always required to be a register. This has the downside of having unnecessarily increased register pressure, meaning complex program would need to spill other registers temporarily to stack in order to obtain an unused register for the [IMM]. Loading to registers will thus also affect state pruning since we need to account for that register use and potentially those registers that had to be spilled/filled again. As a consequence slightly more stack space might have been used due to spilling, and BPF programs are a bit longer due to extra code involving the register load and potentially required spill/fills. Thus, add BPF_JLT (<), BPF_JLE (<=), BPF_JSLT (s<), BPF_JSLE (s<=) counterparts to the eBPF instruction set. Modifying LLVM to remove the NegateCC() workaround in a PoC patch at [1] and allowing it to also emit the new instructions resulted in cilium's BPF programs that are injected into the fast-path to have a reduced program length in the range of 2-3% (e.g. accumulated main and tail call sections from one of the object file reduced from 4864 to 4729 insns), reduced complexity in the range of 10-30% (e.g. accumulated sections reduced in one of the cases from 116432 to 88428 insns), and reduced stack usage in the range of 1-5% (e.g. accumulated sections from one of the object files reduced from 824 to 784b). The modification for LLVM will be incorporated in a backwards compatible way. Plan is for LLVM to have i) a target specific option to offer a possibility to explicitly enable the extension by the user (as we have with -m target specific extensions today for various CPU insns), and ii) have the kernel checked for presence of the extensions and enable them transparently when the user is selecting more aggressive options such as -march=native in a bpf target context. (Other frontends generating BPF byte code, e.g. ply can probe the kernel directly for its code generation.) [1] https://github.com/borkmann/llvm/tree/bpf-insns Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-09 23:39:55 +00:00
case BPF_JMP | BPF_JLE | BPF_K:
bpf: add generic constant blinding for use in jits This work adds a generic facility for use from eBPF JIT compilers that allows for further hardening of JIT generated images through blinding constants. In response to the original work on BPF JIT spraying published by Keegan McAllister [1], most BPF JITs were changed to make images read-only and start at a randomized offset in the page, where the rest was filled with trap instructions. We have this nowadays in x86, arm, arm64 and s390 JIT compilers. Additionally, later work also made eBPF interpreter images read only for kernels supporting DEBUG_SET_MODULE_RONX, that is, x86, arm, arm64 and s390 archs as well currently. This is done by default for mentioned JITs when JITing is enabled. Furthermore, we had a generic and configurable constant blinding facility on our todo for quite some time now to further make spraying harder, and first implementation since around netconf 2016. We found that for systems where untrusted users can load cBPF/eBPF code where JIT is enabled, start offset randomization helps a bit to make jumps into crafted payload harder, but in case where larger programs that cross page boundary are injected, we again have some part of the program opcodes at a page start offset. With improved guessing and more reliable payload injection, chances can increase to jump into such payload. Elena Reshetova recently wrote a test case for it [2, 3]. Moreover, eBPF comes with 64 bit constants, which can leave some more room for payloads. Note that for all this, additional bugs in the kernel are still required to make the jump (and of course to guess right, to not jump into a trap) and naturally the JIT must be enabled, which is disabled by default. For helping mitigation, the general idea is to provide an option bpf_jit_harden that admins can tweak along with bpf_jit_enable, so that for cases where JIT should be enabled for performance reasons, the generated image can be further hardened with blinding constants for unpriviledged users (bpf_jit_harden == 1), with trading off performance for these, but not for privileged ones. We also added the option of blinding for all users (bpf_jit_harden == 2), which is quite helpful for testing f.e. with test_bpf.ko. There are no further e.g. hardening levels of bpf_jit_harden switch intended, rationale is to have it dead simple to use as on/off. Since this functionality would need to be duplicated over and over for JIT compilers to use, which are already complex enough, we provide a generic eBPF byte-code level based blinding implementation, which is then just transparently JITed. JIT compilers need to make only a few changes to integrate this facility and can be migrated one by one. This option is for eBPF JITs and will be used in x86, arm64, s390 without too much effort, and soon ppc64 JITs, thus that native eBPF can be blinded as well as cBPF to eBPF migrations, so that both can be covered with a single implementation. The rule for JITs is that bpf_jit_blind_constants() must be called from bpf_int_jit_compile(), and in case blinding is disabled, we follow normally with JITing the passed program. In case blinding is enabled and we fail during the process of blinding itself, we must return with the interpreter. Similarly, in case the JITing process after the blinding failed, we return normally to the interpreter with the non-blinded code. Meaning, interpreter doesn't change in any way and operates on eBPF code as usual. For doing this pre-JIT blinding step, we need to make use of a helper/auxiliary register, here BPF_REG_AX. This is strictly internal to the JIT and not in any way part of the eBPF architecture. Just like in the same way as JITs internally make use of some helper registers when emitting code, only that here the helper register is one abstraction level higher in eBPF bytecode, but nevertheless in JIT phase. That helper register is needed since f.e. manually written program can issue loads to all registers of eBPF architecture. The core concept with the additional register is: blind out all 32 and 64 bit constants by converting BPF_K based instructions into a small sequence from K_VAL into ((RND ^ K_VAL) ^ RND). Therefore, this is transformed into: BPF_REG_AX := (RND ^ K_VAL), BPF_REG_AX ^= RND, and REG <OP> BPF_REG_AX, so actual operation on the target register is translated from BPF_K into BPF_X one that is operating on BPF_REG_AX's content. During rewriting phase when blinding, RND is newly generated via prandom_u32() for each processed instruction. 64 bit loads are split into two 32 bit loads to make translation and patching not too complex. Only basic thing required by JITs is to call the helper bpf_jit_blind_constants()/bpf_jit_prog_release_other() pair, and to map BPF_REG_AX into an unused register. Small bpf_jit_disasm extract from [2] when applied to x86 JIT: echo 0 > /proc/sys/net/core/bpf_jit_harden ffffffffa034f5e9 + <x>: [...] 39: mov $0xa8909090,%eax 3e: mov $0xa8909090,%eax 43: mov $0xa8ff3148,%eax 48: mov $0xa89081b4,%eax 4d: mov $0xa8900bb0,%eax 52: mov $0xa810e0c1,%eax 57: mov $0xa8908eb4,%eax 5c: mov $0xa89020b0,%eax [...] echo 1 > /proc/sys/net/core/bpf_jit_harden ffffffffa034f1e5 + <x>: [...] 39: mov $0xe1192563,%r10d 3f: xor $0x4989b5f3,%r10d 46: mov %r10d,%eax 49: mov $0xb8296d93,%r10d 4f: xor $0x10b9fd03,%r10d 56: mov %r10d,%eax 59: mov $0x8c381146,%r10d 5f: xor $0x24c7200e,%r10d 66: mov %r10d,%eax 69: mov $0xeb2a830e,%r10d 6f: xor $0x43ba02ba,%r10d 76: mov %r10d,%eax 79: mov $0xd9730af,%r10d 7f: xor $0xa5073b1f,%r10d 86: mov %r10d,%eax 89: mov $0x9a45662b,%r10d 8f: xor $0x325586ea,%r10d 96: mov %r10d,%eax [...] As can be seen, original constants that carry payload are hidden when enabled, actual operations are transformed from constant-based to register-based ones, making jumps into constants ineffective. Above extract/example uses single BPF load instruction over and over, but of course all instructions with constants are blinded. Performance wise, JIT with blinding performs a bit slower than just JIT and faster than interpreter case. This is expected, since we still get all the performance benefits from JITing and in normal use-cases not every single instruction needs to be blinded. Summing up all 296 test cases averaged over multiple runs from test_bpf.ko suite, interpreter was 55% slower than JIT only and JIT with blinding was 8% slower than JIT only. Since there are also some extremes in the test suite, I expect for ordinary workloads that the performance for the JIT with blinding case is even closer to JIT only case, f.e. nmap test case from suite has averaged timings in ns 29 (JIT), 35 (+ blinding), and 151 (interpreter). BPF test suite, seccomp test suite, eBPF sample code and various bigger networking eBPF programs have been tested with this and were running fine. For testing purposes, I also adapted interpreter and redirected blinded eBPF image to interpreter and also here all tests pass. [1] http://mainisusuallyafunction.blogspot.com/2012/11/attacking-hardened-linux-systems-with.html [2] https://github.com/01org/jit-spray-poc-for-ksp/ [3] http://www.openwall.com/lists/kernel-hardening/2016/05/03/5 Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Elena Reshetova <elena.reshetova@intel.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-13 17:08:32 +00:00
case BPF_JMP | BPF_JSGT | BPF_K:
bpf: add BPF_J{LT,LE,SLT,SLE} instructions Currently, eBPF only understands BPF_JGT (>), BPF_JGE (>=), BPF_JSGT (s>), BPF_JSGE (s>=) instructions, this means that particularly *JLT/*JLE counterparts involving immediates need to be rewritten from e.g. X < [IMM] by swapping arguments into [IMM] > X, meaning the immediate first is required to be loaded into a register Y := [IMM], such that then we can compare with Y > X. Note that the destination operand is always required to be a register. This has the downside of having unnecessarily increased register pressure, meaning complex program would need to spill other registers temporarily to stack in order to obtain an unused register for the [IMM]. Loading to registers will thus also affect state pruning since we need to account for that register use and potentially those registers that had to be spilled/filled again. As a consequence slightly more stack space might have been used due to spilling, and BPF programs are a bit longer due to extra code involving the register load and potentially required spill/fills. Thus, add BPF_JLT (<), BPF_JLE (<=), BPF_JSLT (s<), BPF_JSLE (s<=) counterparts to the eBPF instruction set. Modifying LLVM to remove the NegateCC() workaround in a PoC patch at [1] and allowing it to also emit the new instructions resulted in cilium's BPF programs that are injected into the fast-path to have a reduced program length in the range of 2-3% (e.g. accumulated main and tail call sections from one of the object file reduced from 4864 to 4729 insns), reduced complexity in the range of 10-30% (e.g. accumulated sections reduced in one of the cases from 116432 to 88428 insns), and reduced stack usage in the range of 1-5% (e.g. accumulated sections from one of the object files reduced from 824 to 784b). The modification for LLVM will be incorporated in a backwards compatible way. Plan is for LLVM to have i) a target specific option to offer a possibility to explicitly enable the extension by the user (as we have with -m target specific extensions today for various CPU insns), and ii) have the kernel checked for presence of the extensions and enable them transparently when the user is selecting more aggressive options such as -march=native in a bpf target context. (Other frontends generating BPF byte code, e.g. ply can probe the kernel directly for its code generation.) [1] https://github.com/borkmann/llvm/tree/bpf-insns Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-09 23:39:55 +00:00
case BPF_JMP | BPF_JSLT | BPF_K:
bpf: add generic constant blinding for use in jits This work adds a generic facility for use from eBPF JIT compilers that allows for further hardening of JIT generated images through blinding constants. In response to the original work on BPF JIT spraying published by Keegan McAllister [1], most BPF JITs were changed to make images read-only and start at a randomized offset in the page, where the rest was filled with trap instructions. We have this nowadays in x86, arm, arm64 and s390 JIT compilers. Additionally, later work also made eBPF interpreter images read only for kernels supporting DEBUG_SET_MODULE_RONX, that is, x86, arm, arm64 and s390 archs as well currently. This is done by default for mentioned JITs when JITing is enabled. Furthermore, we had a generic and configurable constant blinding facility on our todo for quite some time now to further make spraying harder, and first implementation since around netconf 2016. We found that for systems where untrusted users can load cBPF/eBPF code where JIT is enabled, start offset randomization helps a bit to make jumps into crafted payload harder, but in case where larger programs that cross page boundary are injected, we again have some part of the program opcodes at a page start offset. With improved guessing and more reliable payload injection, chances can increase to jump into such payload. Elena Reshetova recently wrote a test case for it [2, 3]. Moreover, eBPF comes with 64 bit constants, which can leave some more room for payloads. Note that for all this, additional bugs in the kernel are still required to make the jump (and of course to guess right, to not jump into a trap) and naturally the JIT must be enabled, which is disabled by default. For helping mitigation, the general idea is to provide an option bpf_jit_harden that admins can tweak along with bpf_jit_enable, so that for cases where JIT should be enabled for performance reasons, the generated image can be further hardened with blinding constants for unpriviledged users (bpf_jit_harden == 1), with trading off performance for these, but not for privileged ones. We also added the option of blinding for all users (bpf_jit_harden == 2), which is quite helpful for testing f.e. with test_bpf.ko. There are no further e.g. hardening levels of bpf_jit_harden switch intended, rationale is to have it dead simple to use as on/off. Since this functionality would need to be duplicated over and over for JIT compilers to use, which are already complex enough, we provide a generic eBPF byte-code level based blinding implementation, which is then just transparently JITed. JIT compilers need to make only a few changes to integrate this facility and can be migrated one by one. This option is for eBPF JITs and will be used in x86, arm64, s390 without too much effort, and soon ppc64 JITs, thus that native eBPF can be blinded as well as cBPF to eBPF migrations, so that both can be covered with a single implementation. The rule for JITs is that bpf_jit_blind_constants() must be called from bpf_int_jit_compile(), and in case blinding is disabled, we follow normally with JITing the passed program. In case blinding is enabled and we fail during the process of blinding itself, we must return with the interpreter. Similarly, in case the JITing process after the blinding failed, we return normally to the interpreter with the non-blinded code. Meaning, interpreter doesn't change in any way and operates on eBPF code as usual. For doing this pre-JIT blinding step, we need to make use of a helper/auxiliary register, here BPF_REG_AX. This is strictly internal to the JIT and not in any way part of the eBPF architecture. Just like in the same way as JITs internally make use of some helper registers when emitting code, only that here the helper register is one abstraction level higher in eBPF bytecode, but nevertheless in JIT phase. That helper register is needed since f.e. manually written program can issue loads to all registers of eBPF architecture. The core concept with the additional register is: blind out all 32 and 64 bit constants by converting BPF_K based instructions into a small sequence from K_VAL into ((RND ^ K_VAL) ^ RND). Therefore, this is transformed into: BPF_REG_AX := (RND ^ K_VAL), BPF_REG_AX ^= RND, and REG <OP> BPF_REG_AX, so actual operation on the target register is translated from BPF_K into BPF_X one that is operating on BPF_REG_AX's content. During rewriting phase when blinding, RND is newly generated via prandom_u32() for each processed instruction. 64 bit loads are split into two 32 bit loads to make translation and patching not too complex. Only basic thing required by JITs is to call the helper bpf_jit_blind_constants()/bpf_jit_prog_release_other() pair, and to map BPF_REG_AX into an unused register. Small bpf_jit_disasm extract from [2] when applied to x86 JIT: echo 0 > /proc/sys/net/core/bpf_jit_harden ffffffffa034f5e9 + <x>: [...] 39: mov $0xa8909090,%eax 3e: mov $0xa8909090,%eax 43: mov $0xa8ff3148,%eax 48: mov $0xa89081b4,%eax 4d: mov $0xa8900bb0,%eax 52: mov $0xa810e0c1,%eax 57: mov $0xa8908eb4,%eax 5c: mov $0xa89020b0,%eax [...] echo 1 > /proc/sys/net/core/bpf_jit_harden ffffffffa034f1e5 + <x>: [...] 39: mov $0xe1192563,%r10d 3f: xor $0x4989b5f3,%r10d 46: mov %r10d,%eax 49: mov $0xb8296d93,%r10d 4f: xor $0x10b9fd03,%r10d 56: mov %r10d,%eax 59: mov $0x8c381146,%r10d 5f: xor $0x24c7200e,%r10d 66: mov %r10d,%eax 69: mov $0xeb2a830e,%r10d 6f: xor $0x43ba02ba,%r10d 76: mov %r10d,%eax 79: mov $0xd9730af,%r10d 7f: xor $0xa5073b1f,%r10d 86: mov %r10d,%eax 89: mov $0x9a45662b,%r10d 8f: xor $0x325586ea,%r10d 96: mov %r10d,%eax [...] As can be seen, original constants that carry payload are hidden when enabled, actual operations are transformed from constant-based to register-based ones, making jumps into constants ineffective. Above extract/example uses single BPF load instruction over and over, but of course all instructions with constants are blinded. Performance wise, JIT with blinding performs a bit slower than just JIT and faster than interpreter case. This is expected, since we still get all the performance benefits from JITing and in normal use-cases not every single instruction needs to be blinded. Summing up all 296 test cases averaged over multiple runs from test_bpf.ko suite, interpreter was 55% slower than JIT only and JIT with blinding was 8% slower than JIT only. Since there are also some extremes in the test suite, I expect for ordinary workloads that the performance for the JIT with blinding case is even closer to JIT only case, f.e. nmap test case from suite has averaged timings in ns 29 (JIT), 35 (+ blinding), and 151 (interpreter). BPF test suite, seccomp test suite, eBPF sample code and various bigger networking eBPF programs have been tested with this and were running fine. For testing purposes, I also adapted interpreter and redirected blinded eBPF image to interpreter and also here all tests pass. [1] http://mainisusuallyafunction.blogspot.com/2012/11/attacking-hardened-linux-systems-with.html [2] https://github.com/01org/jit-spray-poc-for-ksp/ [3] http://www.openwall.com/lists/kernel-hardening/2016/05/03/5 Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Elena Reshetova <elena.reshetova@intel.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-13 17:08:32 +00:00
case BPF_JMP | BPF_JSGE | BPF_K:
bpf: add BPF_J{LT,LE,SLT,SLE} instructions Currently, eBPF only understands BPF_JGT (>), BPF_JGE (>=), BPF_JSGT (s>), BPF_JSGE (s>=) instructions, this means that particularly *JLT/*JLE counterparts involving immediates need to be rewritten from e.g. X < [IMM] by swapping arguments into [IMM] > X, meaning the immediate first is required to be loaded into a register Y := [IMM], such that then we can compare with Y > X. Note that the destination operand is always required to be a register. This has the downside of having unnecessarily increased register pressure, meaning complex program would need to spill other registers temporarily to stack in order to obtain an unused register for the [IMM]. Loading to registers will thus also affect state pruning since we need to account for that register use and potentially those registers that had to be spilled/filled again. As a consequence slightly more stack space might have been used due to spilling, and BPF programs are a bit longer due to extra code involving the register load and potentially required spill/fills. Thus, add BPF_JLT (<), BPF_JLE (<=), BPF_JSLT (s<), BPF_JSLE (s<=) counterparts to the eBPF instruction set. Modifying LLVM to remove the NegateCC() workaround in a PoC patch at [1] and allowing it to also emit the new instructions resulted in cilium's BPF programs that are injected into the fast-path to have a reduced program length in the range of 2-3% (e.g. accumulated main and tail call sections from one of the object file reduced from 4864 to 4729 insns), reduced complexity in the range of 10-30% (e.g. accumulated sections reduced in one of the cases from 116432 to 88428 insns), and reduced stack usage in the range of 1-5% (e.g. accumulated sections from one of the object files reduced from 824 to 784b). The modification for LLVM will be incorporated in a backwards compatible way. Plan is for LLVM to have i) a target specific option to offer a possibility to explicitly enable the extension by the user (as we have with -m target specific extensions today for various CPU insns), and ii) have the kernel checked for presence of the extensions and enable them transparently when the user is selecting more aggressive options such as -march=native in a bpf target context. (Other frontends generating BPF byte code, e.g. ply can probe the kernel directly for its code generation.) [1] https://github.com/borkmann/llvm/tree/bpf-insns Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-09 23:39:55 +00:00
case BPF_JMP | BPF_JSLE | BPF_K:
bpf: add generic constant blinding for use in jits This work adds a generic facility for use from eBPF JIT compilers that allows for further hardening of JIT generated images through blinding constants. In response to the original work on BPF JIT spraying published by Keegan McAllister [1], most BPF JITs were changed to make images read-only and start at a randomized offset in the page, where the rest was filled with trap instructions. We have this nowadays in x86, arm, arm64 and s390 JIT compilers. Additionally, later work also made eBPF interpreter images read only for kernels supporting DEBUG_SET_MODULE_RONX, that is, x86, arm, arm64 and s390 archs as well currently. This is done by default for mentioned JITs when JITing is enabled. Furthermore, we had a generic and configurable constant blinding facility on our todo for quite some time now to further make spraying harder, and first implementation since around netconf 2016. We found that for systems where untrusted users can load cBPF/eBPF code where JIT is enabled, start offset randomization helps a bit to make jumps into crafted payload harder, but in case where larger programs that cross page boundary are injected, we again have some part of the program opcodes at a page start offset. With improved guessing and more reliable payload injection, chances can increase to jump into such payload. Elena Reshetova recently wrote a test case for it [2, 3]. Moreover, eBPF comes with 64 bit constants, which can leave some more room for payloads. Note that for all this, additional bugs in the kernel are still required to make the jump (and of course to guess right, to not jump into a trap) and naturally the JIT must be enabled, which is disabled by default. For helping mitigation, the general idea is to provide an option bpf_jit_harden that admins can tweak along with bpf_jit_enable, so that for cases where JIT should be enabled for performance reasons, the generated image can be further hardened with blinding constants for unpriviledged users (bpf_jit_harden == 1), with trading off performance for these, but not for privileged ones. We also added the option of blinding for all users (bpf_jit_harden == 2), which is quite helpful for testing f.e. with test_bpf.ko. There are no further e.g. hardening levels of bpf_jit_harden switch intended, rationale is to have it dead simple to use as on/off. Since this functionality would need to be duplicated over and over for JIT compilers to use, which are already complex enough, we provide a generic eBPF byte-code level based blinding implementation, which is then just transparently JITed. JIT compilers need to make only a few changes to integrate this facility and can be migrated one by one. This option is for eBPF JITs and will be used in x86, arm64, s390 without too much effort, and soon ppc64 JITs, thus that native eBPF can be blinded as well as cBPF to eBPF migrations, so that both can be covered with a single implementation. The rule for JITs is that bpf_jit_blind_constants() must be called from bpf_int_jit_compile(), and in case blinding is disabled, we follow normally with JITing the passed program. In case blinding is enabled and we fail during the process of blinding itself, we must return with the interpreter. Similarly, in case the JITing process after the blinding failed, we return normally to the interpreter with the non-blinded code. Meaning, interpreter doesn't change in any way and operates on eBPF code as usual. For doing this pre-JIT blinding step, we need to make use of a helper/auxiliary register, here BPF_REG_AX. This is strictly internal to the JIT and not in any way part of the eBPF architecture. Just like in the same way as JITs internally make use of some helper registers when emitting code, only that here the helper register is one abstraction level higher in eBPF bytecode, but nevertheless in JIT phase. That helper register is needed since f.e. manually written program can issue loads to all registers of eBPF architecture. The core concept with the additional register is: blind out all 32 and 64 bit constants by converting BPF_K based instructions into a small sequence from K_VAL into ((RND ^ K_VAL) ^ RND). Therefore, this is transformed into: BPF_REG_AX := (RND ^ K_VAL), BPF_REG_AX ^= RND, and REG <OP> BPF_REG_AX, so actual operation on the target register is translated from BPF_K into BPF_X one that is operating on BPF_REG_AX's content. During rewriting phase when blinding, RND is newly generated via prandom_u32() for each processed instruction. 64 bit loads are split into two 32 bit loads to make translation and patching not too complex. Only basic thing required by JITs is to call the helper bpf_jit_blind_constants()/bpf_jit_prog_release_other() pair, and to map BPF_REG_AX into an unused register. Small bpf_jit_disasm extract from [2] when applied to x86 JIT: echo 0 > /proc/sys/net/core/bpf_jit_harden ffffffffa034f5e9 + <x>: [...] 39: mov $0xa8909090,%eax 3e: mov $0xa8909090,%eax 43: mov $0xa8ff3148,%eax 48: mov $0xa89081b4,%eax 4d: mov $0xa8900bb0,%eax 52: mov $0xa810e0c1,%eax 57: mov $0xa8908eb4,%eax 5c: mov $0xa89020b0,%eax [...] echo 1 > /proc/sys/net/core/bpf_jit_harden ffffffffa034f1e5 + <x>: [...] 39: mov $0xe1192563,%r10d 3f: xor $0x4989b5f3,%r10d 46: mov %r10d,%eax 49: mov $0xb8296d93,%r10d 4f: xor $0x10b9fd03,%r10d 56: mov %r10d,%eax 59: mov $0x8c381146,%r10d 5f: xor $0x24c7200e,%r10d 66: mov %r10d,%eax 69: mov $0xeb2a830e,%r10d 6f: xor $0x43ba02ba,%r10d 76: mov %r10d,%eax 79: mov $0xd9730af,%r10d 7f: xor $0xa5073b1f,%r10d 86: mov %r10d,%eax 89: mov $0x9a45662b,%r10d 8f: xor $0x325586ea,%r10d 96: mov %r10d,%eax [...] As can be seen, original constants that carry payload are hidden when enabled, actual operations are transformed from constant-based to register-based ones, making jumps into constants ineffective. Above extract/example uses single BPF load instruction over and over, but of course all instructions with constants are blinded. Performance wise, JIT with blinding performs a bit slower than just JIT and faster than interpreter case. This is expected, since we still get all the performance benefits from JITing and in normal use-cases not every single instruction needs to be blinded. Summing up all 296 test cases averaged over multiple runs from test_bpf.ko suite, interpreter was 55% slower than JIT only and JIT with blinding was 8% slower than JIT only. Since there are also some extremes in the test suite, I expect for ordinary workloads that the performance for the JIT with blinding case is even closer to JIT only case, f.e. nmap test case from suite has averaged timings in ns 29 (JIT), 35 (+ blinding), and 151 (interpreter). BPF test suite, seccomp test suite, eBPF sample code and various bigger networking eBPF programs have been tested with this and were running fine. For testing purposes, I also adapted interpreter and redirected blinded eBPF image to interpreter and also here all tests pass. [1] http://mainisusuallyafunction.blogspot.com/2012/11/attacking-hardened-linux-systems-with.html [2] https://github.com/01org/jit-spray-poc-for-ksp/ [3] http://www.openwall.com/lists/kernel-hardening/2016/05/03/5 Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Elena Reshetova <elena.reshetova@intel.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-13 17:08:32 +00:00
case BPF_JMP | BPF_JSET | BPF_K:
/* Accommodate for extra offset in case of a backjump. */
off = from->off;
if (off < 0)
off -= 2;
*to++ = BPF_ALU64_IMM(BPF_MOV, BPF_REG_AX, imm_rnd ^ from->imm);
*to++ = BPF_ALU64_IMM(BPF_XOR, BPF_REG_AX, imm_rnd);
*to++ = BPF_JMP_REG(from->code, from->dst_reg, BPF_REG_AX, off);
break;
case BPF_LD | BPF_ABS | BPF_W:
case BPF_LD | BPF_ABS | BPF_H:
case BPF_LD | BPF_ABS | BPF_B:
*to++ = BPF_ALU64_IMM(BPF_MOV, BPF_REG_AX, imm_rnd ^ from->imm);
*to++ = BPF_ALU64_IMM(BPF_XOR, BPF_REG_AX, imm_rnd);
*to++ = BPF_LD_IND(from->code, BPF_REG_AX, 0);
break;
case BPF_LD | BPF_IND | BPF_W:
case BPF_LD | BPF_IND | BPF_H:
case BPF_LD | BPF_IND | BPF_B:
*to++ = BPF_ALU64_IMM(BPF_MOV, BPF_REG_AX, imm_rnd ^ from->imm);
*to++ = BPF_ALU64_IMM(BPF_XOR, BPF_REG_AX, imm_rnd);
*to++ = BPF_ALU32_REG(BPF_ADD, BPF_REG_AX, from->src_reg);
*to++ = BPF_LD_IND(from->code, BPF_REG_AX, 0);
break;
case BPF_LD | BPF_IMM | BPF_DW:
*to++ = BPF_ALU64_IMM(BPF_MOV, BPF_REG_AX, imm_rnd ^ aux[1].imm);
*to++ = BPF_ALU64_IMM(BPF_XOR, BPF_REG_AX, imm_rnd);
*to++ = BPF_ALU64_IMM(BPF_LSH, BPF_REG_AX, 32);
*to++ = BPF_ALU64_REG(BPF_MOV, aux[0].dst_reg, BPF_REG_AX);
break;
case 0: /* Part 2 of BPF_LD | BPF_IMM | BPF_DW. */
*to++ = BPF_ALU32_IMM(BPF_MOV, BPF_REG_AX, imm_rnd ^ aux[0].imm);
*to++ = BPF_ALU32_IMM(BPF_XOR, BPF_REG_AX, imm_rnd);
*to++ = BPF_ALU64_REG(BPF_OR, aux[0].dst_reg, BPF_REG_AX);
break;
case BPF_ST | BPF_MEM | BPF_DW:
case BPF_ST | BPF_MEM | BPF_W:
case BPF_ST | BPF_MEM | BPF_H:
case BPF_ST | BPF_MEM | BPF_B:
*to++ = BPF_ALU64_IMM(BPF_MOV, BPF_REG_AX, imm_rnd ^ from->imm);
*to++ = BPF_ALU64_IMM(BPF_XOR, BPF_REG_AX, imm_rnd);
*to++ = BPF_STX_MEM(from->code, from->dst_reg, BPF_REG_AX, from->off);
break;
}
out:
return to - to_buff;
}
static struct bpf_prog *bpf_prog_clone_create(struct bpf_prog *fp_other,
gfp_t gfp_extra_flags)
{
gfp_t gfp_flags = GFP_KERNEL | __GFP_ZERO | gfp_extra_flags;
bpf: add generic constant blinding for use in jits This work adds a generic facility for use from eBPF JIT compilers that allows for further hardening of JIT generated images through blinding constants. In response to the original work on BPF JIT spraying published by Keegan McAllister [1], most BPF JITs were changed to make images read-only and start at a randomized offset in the page, where the rest was filled with trap instructions. We have this nowadays in x86, arm, arm64 and s390 JIT compilers. Additionally, later work also made eBPF interpreter images read only for kernels supporting DEBUG_SET_MODULE_RONX, that is, x86, arm, arm64 and s390 archs as well currently. This is done by default for mentioned JITs when JITing is enabled. Furthermore, we had a generic and configurable constant blinding facility on our todo for quite some time now to further make spraying harder, and first implementation since around netconf 2016. We found that for systems where untrusted users can load cBPF/eBPF code where JIT is enabled, start offset randomization helps a bit to make jumps into crafted payload harder, but in case where larger programs that cross page boundary are injected, we again have some part of the program opcodes at a page start offset. With improved guessing and more reliable payload injection, chances can increase to jump into such payload. Elena Reshetova recently wrote a test case for it [2, 3]. Moreover, eBPF comes with 64 bit constants, which can leave some more room for payloads. Note that for all this, additional bugs in the kernel are still required to make the jump (and of course to guess right, to not jump into a trap) and naturally the JIT must be enabled, which is disabled by default. For helping mitigation, the general idea is to provide an option bpf_jit_harden that admins can tweak along with bpf_jit_enable, so that for cases where JIT should be enabled for performance reasons, the generated image can be further hardened with blinding constants for unpriviledged users (bpf_jit_harden == 1), with trading off performance for these, but not for privileged ones. We also added the option of blinding for all users (bpf_jit_harden == 2), which is quite helpful for testing f.e. with test_bpf.ko. There are no further e.g. hardening levels of bpf_jit_harden switch intended, rationale is to have it dead simple to use as on/off. Since this functionality would need to be duplicated over and over for JIT compilers to use, which are already complex enough, we provide a generic eBPF byte-code level based blinding implementation, which is then just transparently JITed. JIT compilers need to make only a few changes to integrate this facility and can be migrated one by one. This option is for eBPF JITs and will be used in x86, arm64, s390 without too much effort, and soon ppc64 JITs, thus that native eBPF can be blinded as well as cBPF to eBPF migrations, so that both can be covered with a single implementation. The rule for JITs is that bpf_jit_blind_constants() must be called from bpf_int_jit_compile(), and in case blinding is disabled, we follow normally with JITing the passed program. In case blinding is enabled and we fail during the process of blinding itself, we must return with the interpreter. Similarly, in case the JITing process after the blinding failed, we return normally to the interpreter with the non-blinded code. Meaning, interpreter doesn't change in any way and operates on eBPF code as usual. For doing this pre-JIT blinding step, we need to make use of a helper/auxiliary register, here BPF_REG_AX. This is strictly internal to the JIT and not in any way part of the eBPF architecture. Just like in the same way as JITs internally make use of some helper registers when emitting code, only that here the helper register is one abstraction level higher in eBPF bytecode, but nevertheless in JIT phase. That helper register is needed since f.e. manually written program can issue loads to all registers of eBPF architecture. The core concept with the additional register is: blind out all 32 and 64 bit constants by converting BPF_K based instructions into a small sequence from K_VAL into ((RND ^ K_VAL) ^ RND). Therefore, this is transformed into: BPF_REG_AX := (RND ^ K_VAL), BPF_REG_AX ^= RND, and REG <OP> BPF_REG_AX, so actual operation on the target register is translated from BPF_K into BPF_X one that is operating on BPF_REG_AX's content. During rewriting phase when blinding, RND is newly generated via prandom_u32() for each processed instruction. 64 bit loads are split into two 32 bit loads to make translation and patching not too complex. Only basic thing required by JITs is to call the helper bpf_jit_blind_constants()/bpf_jit_prog_release_other() pair, and to map BPF_REG_AX into an unused register. Small bpf_jit_disasm extract from [2] when applied to x86 JIT: echo 0 > /proc/sys/net/core/bpf_jit_harden ffffffffa034f5e9 + <x>: [...] 39: mov $0xa8909090,%eax 3e: mov $0xa8909090,%eax 43: mov $0xa8ff3148,%eax 48: mov $0xa89081b4,%eax 4d: mov $0xa8900bb0,%eax 52: mov $0xa810e0c1,%eax 57: mov $0xa8908eb4,%eax 5c: mov $0xa89020b0,%eax [...] echo 1 > /proc/sys/net/core/bpf_jit_harden ffffffffa034f1e5 + <x>: [...] 39: mov $0xe1192563,%r10d 3f: xor $0x4989b5f3,%r10d 46: mov %r10d,%eax 49: mov $0xb8296d93,%r10d 4f: xor $0x10b9fd03,%r10d 56: mov %r10d,%eax 59: mov $0x8c381146,%r10d 5f: xor $0x24c7200e,%r10d 66: mov %r10d,%eax 69: mov $0xeb2a830e,%r10d 6f: xor $0x43ba02ba,%r10d 76: mov %r10d,%eax 79: mov $0xd9730af,%r10d 7f: xor $0xa5073b1f,%r10d 86: mov %r10d,%eax 89: mov $0x9a45662b,%r10d 8f: xor $0x325586ea,%r10d 96: mov %r10d,%eax [...] As can be seen, original constants that carry payload are hidden when enabled, actual operations are transformed from constant-based to register-based ones, making jumps into constants ineffective. Above extract/example uses single BPF load instruction over and over, but of course all instructions with constants are blinded. Performance wise, JIT with blinding performs a bit slower than just JIT and faster than interpreter case. This is expected, since we still get all the performance benefits from JITing and in normal use-cases not every single instruction needs to be blinded. Summing up all 296 test cases averaged over multiple runs from test_bpf.ko suite, interpreter was 55% slower than JIT only and JIT with blinding was 8% slower than JIT only. Since there are also some extremes in the test suite, I expect for ordinary workloads that the performance for the JIT with blinding case is even closer to JIT only case, f.e. nmap test case from suite has averaged timings in ns 29 (JIT), 35 (+ blinding), and 151 (interpreter). BPF test suite, seccomp test suite, eBPF sample code and various bigger networking eBPF programs have been tested with this and were running fine. For testing purposes, I also adapted interpreter and redirected blinded eBPF image to interpreter and also here all tests pass. [1] http://mainisusuallyafunction.blogspot.com/2012/11/attacking-hardened-linux-systems-with.html [2] https://github.com/01org/jit-spray-poc-for-ksp/ [3] http://www.openwall.com/lists/kernel-hardening/2016/05/03/5 Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Elena Reshetova <elena.reshetova@intel.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-13 17:08:32 +00:00
struct bpf_prog *fp;
fp = __vmalloc(fp_other->pages * PAGE_SIZE, gfp_flags, PAGE_KERNEL);
if (fp != NULL) {
/* aux->prog still points to the fp_other one, so
* when promoting the clone to the real program,
* this still needs to be adapted.
*/
memcpy(fp, fp_other, fp_other->pages * PAGE_SIZE);
}
return fp;
}
static void bpf_prog_clone_free(struct bpf_prog *fp)
{
/* aux was stolen by the other clone, so we cannot free
* it from this path! It will be freed eventually by the
* other program on release.
*
* At this point, we don't need a deferred release since
* clone is guaranteed to not be locked.
*/
fp->aux = NULL;
__bpf_prog_free(fp);
}
void bpf_jit_prog_release_other(struct bpf_prog *fp, struct bpf_prog *fp_other)
{
/* We have to repoint aux->prog to self, as we don't
* know whether fp here is the clone or the original.
*/
fp->aux->prog = fp;
bpf_prog_clone_free(fp_other);
}
struct bpf_prog *bpf_jit_blind_constants(struct bpf_prog *prog)
{
struct bpf_insn insn_buff[16], aux[2];
struct bpf_prog *clone, *tmp;
int insn_delta, insn_cnt;
struct bpf_insn *insn;
int i, rewritten;
bpf: x64: add JIT support for multi-function programs Typical JIT does several passes over bpf instructions to compute total size and relative offsets of jumps and calls. With multitple bpf functions calling each other all relative calls will have invalid offsets intially therefore we need to additional last pass over the program to emit calls with correct offsets. For example in case of three bpf functions: main: call foo call bpf_map_lookup exit foo: call bar exit bar: exit We will call bpf_int_jit_compile() indepedently for main(), foo() and bar() x64 JIT typically does 4-5 passes to converge. After these initial passes the image for these 3 functions will be good except call targets, since start addresses of foo() and bar() are unknown when we were JITing main() (note that call bpf_map_lookup will be resolved properly during initial passes). Once start addresses of 3 functions are known we patch call_insn->imm to point to right functions and call bpf_int_jit_compile() again which needs only one pass. Additional safety checks are done to make sure this last pass doesn't produce image that is larger or smaller than previous pass. When constant blinding is on it's applied to all functions at the first pass, since doing it once again at the last pass can change size of the JITed code. Tested on x64 and arm64 hw with JIT on/off, blinding on/off. x64 jits bpf-to-bpf calls correctly while arm64 falls back to interpreter. All other JITs that support normal BPF_CALL will behave the same way since bpf-to-bpf call is equivalent to bpf-to-kernel call from JITs point of view. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:15 +00:00
if (!bpf_jit_blinding_enabled(prog) || prog->blinded)
bpf: add generic constant blinding for use in jits This work adds a generic facility for use from eBPF JIT compilers that allows for further hardening of JIT generated images through blinding constants. In response to the original work on BPF JIT spraying published by Keegan McAllister [1], most BPF JITs were changed to make images read-only and start at a randomized offset in the page, where the rest was filled with trap instructions. We have this nowadays in x86, arm, arm64 and s390 JIT compilers. Additionally, later work also made eBPF interpreter images read only for kernels supporting DEBUG_SET_MODULE_RONX, that is, x86, arm, arm64 and s390 archs as well currently. This is done by default for mentioned JITs when JITing is enabled. Furthermore, we had a generic and configurable constant blinding facility on our todo for quite some time now to further make spraying harder, and first implementation since around netconf 2016. We found that for systems where untrusted users can load cBPF/eBPF code where JIT is enabled, start offset randomization helps a bit to make jumps into crafted payload harder, but in case where larger programs that cross page boundary are injected, we again have some part of the program opcodes at a page start offset. With improved guessing and more reliable payload injection, chances can increase to jump into such payload. Elena Reshetova recently wrote a test case for it [2, 3]. Moreover, eBPF comes with 64 bit constants, which can leave some more room for payloads. Note that for all this, additional bugs in the kernel are still required to make the jump (and of course to guess right, to not jump into a trap) and naturally the JIT must be enabled, which is disabled by default. For helping mitigation, the general idea is to provide an option bpf_jit_harden that admins can tweak along with bpf_jit_enable, so that for cases where JIT should be enabled for performance reasons, the generated image can be further hardened with blinding constants for unpriviledged users (bpf_jit_harden == 1), with trading off performance for these, but not for privileged ones. We also added the option of blinding for all users (bpf_jit_harden == 2), which is quite helpful for testing f.e. with test_bpf.ko. There are no further e.g. hardening levels of bpf_jit_harden switch intended, rationale is to have it dead simple to use as on/off. Since this functionality would need to be duplicated over and over for JIT compilers to use, which are already complex enough, we provide a generic eBPF byte-code level based blinding implementation, which is then just transparently JITed. JIT compilers need to make only a few changes to integrate this facility and can be migrated one by one. This option is for eBPF JITs and will be used in x86, arm64, s390 without too much effort, and soon ppc64 JITs, thus that native eBPF can be blinded as well as cBPF to eBPF migrations, so that both can be covered with a single implementation. The rule for JITs is that bpf_jit_blind_constants() must be called from bpf_int_jit_compile(), and in case blinding is disabled, we follow normally with JITing the passed program. In case blinding is enabled and we fail during the process of blinding itself, we must return with the interpreter. Similarly, in case the JITing process after the blinding failed, we return normally to the interpreter with the non-blinded code. Meaning, interpreter doesn't change in any way and operates on eBPF code as usual. For doing this pre-JIT blinding step, we need to make use of a helper/auxiliary register, here BPF_REG_AX. This is strictly internal to the JIT and not in any way part of the eBPF architecture. Just like in the same way as JITs internally make use of some helper registers when emitting code, only that here the helper register is one abstraction level higher in eBPF bytecode, but nevertheless in JIT phase. That helper register is needed since f.e. manually written program can issue loads to all registers of eBPF architecture. The core concept with the additional register is: blind out all 32 and 64 bit constants by converting BPF_K based instructions into a small sequence from K_VAL into ((RND ^ K_VAL) ^ RND). Therefore, this is transformed into: BPF_REG_AX := (RND ^ K_VAL), BPF_REG_AX ^= RND, and REG <OP> BPF_REG_AX, so actual operation on the target register is translated from BPF_K into BPF_X one that is operating on BPF_REG_AX's content. During rewriting phase when blinding, RND is newly generated via prandom_u32() for each processed instruction. 64 bit loads are split into two 32 bit loads to make translation and patching not too complex. Only basic thing required by JITs is to call the helper bpf_jit_blind_constants()/bpf_jit_prog_release_other() pair, and to map BPF_REG_AX into an unused register. Small bpf_jit_disasm extract from [2] when applied to x86 JIT: echo 0 > /proc/sys/net/core/bpf_jit_harden ffffffffa034f5e9 + <x>: [...] 39: mov $0xa8909090,%eax 3e: mov $0xa8909090,%eax 43: mov $0xa8ff3148,%eax 48: mov $0xa89081b4,%eax 4d: mov $0xa8900bb0,%eax 52: mov $0xa810e0c1,%eax 57: mov $0xa8908eb4,%eax 5c: mov $0xa89020b0,%eax [...] echo 1 > /proc/sys/net/core/bpf_jit_harden ffffffffa034f1e5 + <x>: [...] 39: mov $0xe1192563,%r10d 3f: xor $0x4989b5f3,%r10d 46: mov %r10d,%eax 49: mov $0xb8296d93,%r10d 4f: xor $0x10b9fd03,%r10d 56: mov %r10d,%eax 59: mov $0x8c381146,%r10d 5f: xor $0x24c7200e,%r10d 66: mov %r10d,%eax 69: mov $0xeb2a830e,%r10d 6f: xor $0x43ba02ba,%r10d 76: mov %r10d,%eax 79: mov $0xd9730af,%r10d 7f: xor $0xa5073b1f,%r10d 86: mov %r10d,%eax 89: mov $0x9a45662b,%r10d 8f: xor $0x325586ea,%r10d 96: mov %r10d,%eax [...] As can be seen, original constants that carry payload are hidden when enabled, actual operations are transformed from constant-based to register-based ones, making jumps into constants ineffective. Above extract/example uses single BPF load instruction over and over, but of course all instructions with constants are blinded. Performance wise, JIT with blinding performs a bit slower than just JIT and faster than interpreter case. This is expected, since we still get all the performance benefits from JITing and in normal use-cases not every single instruction needs to be blinded. Summing up all 296 test cases averaged over multiple runs from test_bpf.ko suite, interpreter was 55% slower than JIT only and JIT with blinding was 8% slower than JIT only. Since there are also some extremes in the test suite, I expect for ordinary workloads that the performance for the JIT with blinding case is even closer to JIT only case, f.e. nmap test case from suite has averaged timings in ns 29 (JIT), 35 (+ blinding), and 151 (interpreter). BPF test suite, seccomp test suite, eBPF sample code and various bigger networking eBPF programs have been tested with this and were running fine. For testing purposes, I also adapted interpreter and redirected blinded eBPF image to interpreter and also here all tests pass. [1] http://mainisusuallyafunction.blogspot.com/2012/11/attacking-hardened-linux-systems-with.html [2] https://github.com/01org/jit-spray-poc-for-ksp/ [3] http://www.openwall.com/lists/kernel-hardening/2016/05/03/5 Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Elena Reshetova <elena.reshetova@intel.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-13 17:08:32 +00:00
return prog;
clone = bpf_prog_clone_create(prog, GFP_USER);
if (!clone)
return ERR_PTR(-ENOMEM);
insn_cnt = clone->len;
insn = clone->insnsi;
for (i = 0; i < insn_cnt; i++, insn++) {
/* We temporarily need to hold the original ld64 insn
* so that we can still access the first part in the
* second blinding run.
*/
if (insn[0].code == (BPF_LD | BPF_IMM | BPF_DW) &&
insn[1].code == 0)
memcpy(aux, insn, sizeof(aux));
rewritten = bpf_jit_blind_insn(insn, aux, insn_buff);
if (!rewritten)
continue;
tmp = bpf_patch_insn_single(clone, i, insn_buff, rewritten);
if (!tmp) {
/* Patching may have repointed aux->prog during
* realloc from the original one, so we need to
* fix it up here on error.
*/
bpf_jit_prog_release_other(prog, clone);
return ERR_PTR(-ENOMEM);
}
clone = tmp;
insn_delta = rewritten - 1;
/* Walk new program and skip insns we just inserted. */
insn = clone->insnsi + i + insn_delta;
insn_cnt += insn_delta;
i += insn_delta;
}
bpf: x64: add JIT support for multi-function programs Typical JIT does several passes over bpf instructions to compute total size and relative offsets of jumps and calls. With multitple bpf functions calling each other all relative calls will have invalid offsets intially therefore we need to additional last pass over the program to emit calls with correct offsets. For example in case of three bpf functions: main: call foo call bpf_map_lookup exit foo: call bar exit bar: exit We will call bpf_int_jit_compile() indepedently for main(), foo() and bar() x64 JIT typically does 4-5 passes to converge. After these initial passes the image for these 3 functions will be good except call targets, since start addresses of foo() and bar() are unknown when we were JITing main() (note that call bpf_map_lookup will be resolved properly during initial passes). Once start addresses of 3 functions are known we patch call_insn->imm to point to right functions and call bpf_int_jit_compile() again which needs only one pass. Additional safety checks are done to make sure this last pass doesn't produce image that is larger or smaller than previous pass. When constant blinding is on it's applied to all functions at the first pass, since doing it once again at the last pass can change size of the JITed code. Tested on x64 and arm64 hw with JIT on/off, blinding on/off. x64 jits bpf-to-bpf calls correctly while arm64 falls back to interpreter. All other JITs that support normal BPF_CALL will behave the same way since bpf-to-bpf call is equivalent to bpf-to-kernel call from JITs point of view. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:15 +00:00
clone->blinded = 1;
bpf: add generic constant blinding for use in jits This work adds a generic facility for use from eBPF JIT compilers that allows for further hardening of JIT generated images through blinding constants. In response to the original work on BPF JIT spraying published by Keegan McAllister [1], most BPF JITs were changed to make images read-only and start at a randomized offset in the page, where the rest was filled with trap instructions. We have this nowadays in x86, arm, arm64 and s390 JIT compilers. Additionally, later work also made eBPF interpreter images read only for kernels supporting DEBUG_SET_MODULE_RONX, that is, x86, arm, arm64 and s390 archs as well currently. This is done by default for mentioned JITs when JITing is enabled. Furthermore, we had a generic and configurable constant blinding facility on our todo for quite some time now to further make spraying harder, and first implementation since around netconf 2016. We found that for systems where untrusted users can load cBPF/eBPF code where JIT is enabled, start offset randomization helps a bit to make jumps into crafted payload harder, but in case where larger programs that cross page boundary are injected, we again have some part of the program opcodes at a page start offset. With improved guessing and more reliable payload injection, chances can increase to jump into such payload. Elena Reshetova recently wrote a test case for it [2, 3]. Moreover, eBPF comes with 64 bit constants, which can leave some more room for payloads. Note that for all this, additional bugs in the kernel are still required to make the jump (and of course to guess right, to not jump into a trap) and naturally the JIT must be enabled, which is disabled by default. For helping mitigation, the general idea is to provide an option bpf_jit_harden that admins can tweak along with bpf_jit_enable, so that for cases where JIT should be enabled for performance reasons, the generated image can be further hardened with blinding constants for unpriviledged users (bpf_jit_harden == 1), with trading off performance for these, but not for privileged ones. We also added the option of blinding for all users (bpf_jit_harden == 2), which is quite helpful for testing f.e. with test_bpf.ko. There are no further e.g. hardening levels of bpf_jit_harden switch intended, rationale is to have it dead simple to use as on/off. Since this functionality would need to be duplicated over and over for JIT compilers to use, which are already complex enough, we provide a generic eBPF byte-code level based blinding implementation, which is then just transparently JITed. JIT compilers need to make only a few changes to integrate this facility and can be migrated one by one. This option is for eBPF JITs and will be used in x86, arm64, s390 without too much effort, and soon ppc64 JITs, thus that native eBPF can be blinded as well as cBPF to eBPF migrations, so that both can be covered with a single implementation. The rule for JITs is that bpf_jit_blind_constants() must be called from bpf_int_jit_compile(), and in case blinding is disabled, we follow normally with JITing the passed program. In case blinding is enabled and we fail during the process of blinding itself, we must return with the interpreter. Similarly, in case the JITing process after the blinding failed, we return normally to the interpreter with the non-blinded code. Meaning, interpreter doesn't change in any way and operates on eBPF code as usual. For doing this pre-JIT blinding step, we need to make use of a helper/auxiliary register, here BPF_REG_AX. This is strictly internal to the JIT and not in any way part of the eBPF architecture. Just like in the same way as JITs internally make use of some helper registers when emitting code, only that here the helper register is one abstraction level higher in eBPF bytecode, but nevertheless in JIT phase. That helper register is needed since f.e. manually written program can issue loads to all registers of eBPF architecture. The core concept with the additional register is: blind out all 32 and 64 bit constants by converting BPF_K based instructions into a small sequence from K_VAL into ((RND ^ K_VAL) ^ RND). Therefore, this is transformed into: BPF_REG_AX := (RND ^ K_VAL), BPF_REG_AX ^= RND, and REG <OP> BPF_REG_AX, so actual operation on the target register is translated from BPF_K into BPF_X one that is operating on BPF_REG_AX's content. During rewriting phase when blinding, RND is newly generated via prandom_u32() for each processed instruction. 64 bit loads are split into two 32 bit loads to make translation and patching not too complex. Only basic thing required by JITs is to call the helper bpf_jit_blind_constants()/bpf_jit_prog_release_other() pair, and to map BPF_REG_AX into an unused register. Small bpf_jit_disasm extract from [2] when applied to x86 JIT: echo 0 > /proc/sys/net/core/bpf_jit_harden ffffffffa034f5e9 + <x>: [...] 39: mov $0xa8909090,%eax 3e: mov $0xa8909090,%eax 43: mov $0xa8ff3148,%eax 48: mov $0xa89081b4,%eax 4d: mov $0xa8900bb0,%eax 52: mov $0xa810e0c1,%eax 57: mov $0xa8908eb4,%eax 5c: mov $0xa89020b0,%eax [...] echo 1 > /proc/sys/net/core/bpf_jit_harden ffffffffa034f1e5 + <x>: [...] 39: mov $0xe1192563,%r10d 3f: xor $0x4989b5f3,%r10d 46: mov %r10d,%eax 49: mov $0xb8296d93,%r10d 4f: xor $0x10b9fd03,%r10d 56: mov %r10d,%eax 59: mov $0x8c381146,%r10d 5f: xor $0x24c7200e,%r10d 66: mov %r10d,%eax 69: mov $0xeb2a830e,%r10d 6f: xor $0x43ba02ba,%r10d 76: mov %r10d,%eax 79: mov $0xd9730af,%r10d 7f: xor $0xa5073b1f,%r10d 86: mov %r10d,%eax 89: mov $0x9a45662b,%r10d 8f: xor $0x325586ea,%r10d 96: mov %r10d,%eax [...] As can be seen, original constants that carry payload are hidden when enabled, actual operations are transformed from constant-based to register-based ones, making jumps into constants ineffective. Above extract/example uses single BPF load instruction over and over, but of course all instructions with constants are blinded. Performance wise, JIT with blinding performs a bit slower than just JIT and faster than interpreter case. This is expected, since we still get all the performance benefits from JITing and in normal use-cases not every single instruction needs to be blinded. Summing up all 296 test cases averaged over multiple runs from test_bpf.ko suite, interpreter was 55% slower than JIT only and JIT with blinding was 8% slower than JIT only. Since there are also some extremes in the test suite, I expect for ordinary workloads that the performance for the JIT with blinding case is even closer to JIT only case, f.e. nmap test case from suite has averaged timings in ns 29 (JIT), 35 (+ blinding), and 151 (interpreter). BPF test suite, seccomp test suite, eBPF sample code and various bigger networking eBPF programs have been tested with this and were running fine. For testing purposes, I also adapted interpreter and redirected blinded eBPF image to interpreter and also here all tests pass. [1] http://mainisusuallyafunction.blogspot.com/2012/11/attacking-hardened-linux-systems-with.html [2] https://github.com/01org/jit-spray-poc-for-ksp/ [3] http://www.openwall.com/lists/kernel-hardening/2016/05/03/5 Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Elena Reshetova <elena.reshetova@intel.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-13 17:08:32 +00:00
return clone;
}
#endif /* CONFIG_BPF_JIT */
/* Base function for offset calculation. Needs to go into .text section,
* therefore keeping it non-static as well; will also be used by JITs
bpf: allow for correlation of maps and helpers in dump Currently a dump of an xlated prog (post verifier stage) doesn't correlate used helpers as well as maps. The prog info lists involved map ids, however there's no correlation of where in the program they are used as of today. Likewise, bpftool does not correlate helper calls with the target functions. The latter can be done w/o any kernel changes through kallsyms, and also has the advantage that this works with inlined helpers and BPF calls. Example, via interpreter: # tc filter show dev foo ingress filter protocol all pref 49152 bpf chain 0 filter protocol all pref 49152 bpf chain 0 handle 0x1 foo.o:[ingress] \ direct-action not_in_hw id 1 tag c74773051b364165 <-- prog id:1 * Output before patch (calls/maps remain unclear): # bpftool prog dump xlated id 1 <-- dump prog id:1 0: (b7) r1 = 2 1: (63) *(u32 *)(r10 -4) = r1 2: (bf) r2 = r10 3: (07) r2 += -4 4: (18) r1 = 0xffff95c47a8d4800 6: (85) call unknown#73040 7: (15) if r0 == 0x0 goto pc+18 8: (bf) r2 = r10 9: (07) r2 += -4 10: (bf) r1 = r0 11: (85) call unknown#73040 12: (15) if r0 == 0x0 goto pc+23 [...] * Output after patch: # bpftool prog dump xlated id 1 0: (b7) r1 = 2 1: (63) *(u32 *)(r10 -4) = r1 2: (bf) r2 = r10 3: (07) r2 += -4 4: (18) r1 = map[id:2] <-- map id:2 6: (85) call bpf_map_lookup_elem#73424 <-- helper call 7: (15) if r0 == 0x0 goto pc+18 8: (bf) r2 = r10 9: (07) r2 += -4 10: (bf) r1 = r0 11: (85) call bpf_map_lookup_elem#73424 12: (15) if r0 == 0x0 goto pc+23 [...] # bpftool map show id 2 <-- show/dump/etc map id:2 2: hash_of_maps flags 0x0 key 4B value 4B max_entries 3 memlock 4096B Example, JITed, same prog: # tc filter show dev foo ingress filter protocol all pref 49152 bpf chain 0 filter protocol all pref 49152 bpf chain 0 handle 0x1 foo.o:[ingress] \ direct-action not_in_hw id 3 tag c74773051b364165 jited # bpftool prog show id 3 3: sched_cls tag c74773051b364165 loaded_at Dec 19/13:48 uid 0 xlated 384B jited 257B memlock 4096B map_ids 2 # bpftool prog dump xlated id 3 0: (b7) r1 = 2 1: (63) *(u32 *)(r10 -4) = r1 2: (bf) r2 = r10 3: (07) r2 += -4 4: (18) r1 = map[id:2] <-- map id:2 6: (85) call __htab_map_lookup_elem#77408 <-+ inlined rewrite 7: (15) if r0 == 0x0 goto pc+2 | 8: (07) r0 += 56 | 9: (79) r0 = *(u64 *)(r0 +0) <-+ 10: (15) if r0 == 0x0 goto pc+24 11: (bf) r2 = r10 12: (07) r2 += -4 [...] Example, same prog, but kallsyms disabled (in that case we are also not allowed to pass any relative offsets, etc, so prog becomes pointer sanitized on dump): # sysctl kernel.kptr_restrict=2 kernel.kptr_restrict = 2 # bpftool prog dump xlated id 3 0: (b7) r1 = 2 1: (63) *(u32 *)(r10 -4) = r1 2: (bf) r2 = r10 3: (07) r2 += -4 4: (18) r1 = map[id:2] 6: (85) call bpf_unspec#0 7: (15) if r0 == 0x0 goto pc+2 [...] Example, BPF calls via interpreter: # bpftool prog dump xlated id 1 0: (85) call pc+2#__bpf_prog_run_args32 1: (b7) r0 = 1 2: (95) exit 3: (b7) r0 = 2 4: (95) exit Example, BPF calls via JIT: # sysctl net.core.bpf_jit_enable=1 net.core.bpf_jit_enable = 1 # sysctl net.core.bpf_jit_kallsyms=1 net.core.bpf_jit_kallsyms = 1 # bpftool prog dump xlated id 1 0: (85) call pc+2#bpf_prog_3b185187f1855c4c_F 1: (b7) r0 = 1 2: (95) exit 3: (b7) r0 = 2 4: (95) exit And finally, an example for tail calls that is now working as well wrt correlation: # bpftool prog dump xlated id 2 [...] 10: (b7) r2 = 8 11: (85) call bpf_trace_printk#-41312 12: (bf) r1 = r6 13: (18) r2 = map[id:1] 15: (b7) r3 = 0 16: (85) call bpf_tail_call#12 17: (b7) r1 = 42 18: (6b) *(u16 *)(r6 +46) = r1 19: (b7) r0 = 0 20: (95) exit # bpftool map show id 1 1: prog_array flags 0x0 key 4B value 4B max_entries 1 memlock 4096B Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2017-12-20 12:42:57 +00:00
* anyway later on, so do not let the compiler omit it. This also needs
* to go into kallsyms for correlation from e.g. bpftool, so naming
* must not change.
*/
noinline u64 __bpf_call_base(u64 r1, u64 r2, u64 r3, u64 r4, u64 r5)
{
return 0;
}
EXPORT_SYMBOL_GPL(__bpf_call_base);
bpf: introduce BPF_JIT_ALWAYS_ON config The BPF interpreter has been used as part of the spectre 2 attack CVE-2017-5715. A quote from goolge project zero blog: "At this point, it would normally be necessary to locate gadgets in the host kernel code that can be used to actually leak data by reading from an attacker-controlled location, shifting and masking the result appropriately and then using the result of that as offset to an attacker-controlled address for a load. But piecing gadgets together and figuring out which ones work in a speculation context seems annoying. So instead, we decided to use the eBPF interpreter, which is built into the host kernel - while there is no legitimate way to invoke it from inside a VM, the presence of the code in the host kernel's text section is sufficient to make it usable for the attack, just like with ordinary ROP gadgets." To make attacker job harder introduce BPF_JIT_ALWAYS_ON config option that removes interpreter from the kernel in favor of JIT-only mode. So far eBPF JIT is supported by: x64, arm64, arm32, sparc64, s390, powerpc64, mips64 The start of JITed program is randomized and code page is marked as read-only. In addition "constant blinding" can be turned on with net.core.bpf_jit_harden v2->v3: - move __bpf_prog_ret0 under ifdef (Daniel) v1->v2: - fix init order, test_bpf and cBPF (Daniel's feedback) - fix offloaded bpf (Jakub's feedback) - add 'return 0' dummy in case something can invoke prog->bpf_func - retarget bpf tree. For bpf-next the patch would need one extra hunk. It will be sent when the trees are merged back to net-next Considered doing: int bpf_jit_enable __read_mostly = BPF_EBPF_JIT_DEFAULT; but it seems better to land the patch as-is and in bpf-next remove bpf_jit_enable global variable from all JITs, consolidate in one place and remove this jit_init() function. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-01-09 18:04:29 +00:00
#ifndef CONFIG_BPF_JIT_ALWAYS_ON
/**
net: filter: split 'struct sk_filter' into socket and bpf parts clean up names related to socket filtering and bpf in the following way: - everything that deals with sockets keeps 'sk_*' prefix - everything that is pure BPF is changed to 'bpf_*' prefix split 'struct sk_filter' into struct sk_filter { atomic_t refcnt; struct rcu_head rcu; struct bpf_prog *prog; }; and struct bpf_prog { u32 jited:1, len:31; struct sock_fprog_kern *orig_prog; unsigned int (*bpf_func)(const struct sk_buff *skb, const struct bpf_insn *filter); union { struct sock_filter insns[0]; struct bpf_insn insnsi[0]; struct work_struct work; }; }; so that 'struct bpf_prog' can be used independent of sockets and cleans up 'unattached' bpf use cases split SK_RUN_FILTER macro into: SK_RUN_FILTER to be used with 'struct sk_filter *' and BPF_PROG_RUN to be used with 'struct bpf_prog *' __sk_filter_release(struct sk_filter *) gains __bpf_prog_release(struct bpf_prog *) helper function also perform related renames for the functions that work with 'struct bpf_prog *', since they're on the same lines: sk_filter_size -> bpf_prog_size sk_filter_select_runtime -> bpf_prog_select_runtime sk_filter_free -> bpf_prog_free sk_unattached_filter_create -> bpf_prog_create sk_unattached_filter_destroy -> bpf_prog_destroy sk_store_orig_filter -> bpf_prog_store_orig_filter sk_release_orig_filter -> bpf_release_orig_filter __sk_migrate_filter -> bpf_migrate_filter __sk_prepare_filter -> bpf_prepare_filter API for attaching classic BPF to a socket stays the same: sk_attach_filter(prog, struct sock *)/sk_detach_filter(struct sock *) and SK_RUN_FILTER(struct sk_filter *, ctx) to execute a program which is used by sockets, tun, af_packet API for 'unattached' BPF programs becomes: bpf_prog_create(struct bpf_prog **)/bpf_prog_destroy(struct bpf_prog *) and BPF_PROG_RUN(struct bpf_prog *, ctx) to execute a program which is used by isdn, ppp, team, seccomp, ptp, xt_bpf, cls_bpf, test_bpf Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-31 03:34:16 +00:00
* __bpf_prog_run - run eBPF program on a given context
* @ctx: is the data we are operating on
* @insn: is the array of eBPF instructions
*
net: filter: split 'struct sk_filter' into socket and bpf parts clean up names related to socket filtering and bpf in the following way: - everything that deals with sockets keeps 'sk_*' prefix - everything that is pure BPF is changed to 'bpf_*' prefix split 'struct sk_filter' into struct sk_filter { atomic_t refcnt; struct rcu_head rcu; struct bpf_prog *prog; }; and struct bpf_prog { u32 jited:1, len:31; struct sock_fprog_kern *orig_prog; unsigned int (*bpf_func)(const struct sk_buff *skb, const struct bpf_insn *filter); union { struct sock_filter insns[0]; struct bpf_insn insnsi[0]; struct work_struct work; }; }; so that 'struct bpf_prog' can be used independent of sockets and cleans up 'unattached' bpf use cases split SK_RUN_FILTER macro into: SK_RUN_FILTER to be used with 'struct sk_filter *' and BPF_PROG_RUN to be used with 'struct bpf_prog *' __sk_filter_release(struct sk_filter *) gains __bpf_prog_release(struct bpf_prog *) helper function also perform related renames for the functions that work with 'struct bpf_prog *', since they're on the same lines: sk_filter_size -> bpf_prog_size sk_filter_select_runtime -> bpf_prog_select_runtime sk_filter_free -> bpf_prog_free sk_unattached_filter_create -> bpf_prog_create sk_unattached_filter_destroy -> bpf_prog_destroy sk_store_orig_filter -> bpf_prog_store_orig_filter sk_release_orig_filter -> bpf_release_orig_filter __sk_migrate_filter -> bpf_migrate_filter __sk_prepare_filter -> bpf_prepare_filter API for attaching classic BPF to a socket stays the same: sk_attach_filter(prog, struct sock *)/sk_detach_filter(struct sock *) and SK_RUN_FILTER(struct sk_filter *, ctx) to execute a program which is used by sockets, tun, af_packet API for 'unattached' BPF programs becomes: bpf_prog_create(struct bpf_prog **)/bpf_prog_destroy(struct bpf_prog *) and BPF_PROG_RUN(struct bpf_prog *, ctx) to execute a program which is used by isdn, ppp, team, seccomp, ptp, xt_bpf, cls_bpf, test_bpf Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-31 03:34:16 +00:00
* Decode and execute eBPF instructions.
*/
static u64 ___bpf_prog_run(u64 *regs, const struct bpf_insn *insn, u64 *stack)
{
bpf: split bpf core interpreter split __bpf_prog_run() interpreter into stack allocation and execution parts. The code section shrinks which helps interpreter performance in some cases. text data bss dec hex filename 26350 10328 624 37302 91b6 kernel/bpf/core.o.before 25777 10328 624 36729 8f79 kernel/bpf/core.o.after Very short programs got slower (due to extra function call): Before: test_bpf: #89 ALU64_ADD_K: 1 + 2 = 3 jited:0 7 PASS test_bpf: #90 ALU64_ADD_K: 3 + 0 = 3 jited:0 8 PASS test_bpf: #91 ALU64_ADD_K: 1 + 2147483646 = 2147483647 jited:0 7 PASS test_bpf: #92 ALU64_ADD_K: 4294967294 + 2 = 4294967296 jited:0 11 PASS test_bpf: #93 ALU64_ADD_K: 2147483646 + -2147483647 = -1 jited:0 7 PASS After: test_bpf: #89 ALU64_ADD_K: 1 + 2 = 3 jited:0 11 PASS test_bpf: #90 ALU64_ADD_K: 3 + 0 = 3 jited:0 11 PASS test_bpf: #91 ALU64_ADD_K: 1 + 2147483646 = 2147483647 jited:0 11 PASS test_bpf: #92 ALU64_ADD_K: 4294967294 + 2 = 4294967296 jited:0 14 PASS test_bpf: #93 ALU64_ADD_K: 2147483646 + -2147483647 = -1 jited:0 10 PASS Longer programs got faster: Before: test_bpf: #266 BPF_MAXINSNS: Ctx heavy transformations jited:0 20286 20513 PASS test_bpf: #267 BPF_MAXINSNS: Call heavy transformations jited:0 31853 31768 PASS test_bpf: #268 BPF_MAXINSNS: Jump heavy test jited:0 9815 PASS test_bpf: #269 BPF_MAXINSNS: Very long jump backwards jited:0 6 PASS test_bpf: #270 BPF_MAXINSNS: Edge hopping nuthouse jited:0 13959 PASS test_bpf: #271 BPF_MAXINSNS: Jump, gap, jump, ... jited:0 210 PASS test_bpf: #272 BPF_MAXINSNS: ld_abs+get_processor_id jited:0 21724 PASS test_bpf: #273 BPF_MAXINSNS: ld_abs+vlan_push/pop jited:0 19118 PASS After: test_bpf: #266 BPF_MAXINSNS: Ctx heavy transformations jited:0 19008 18827 PASS test_bpf: #267 BPF_MAXINSNS: Call heavy transformations jited:0 29238 28450 PASS test_bpf: #268 BPF_MAXINSNS: Jump heavy test jited:0 9485 PASS test_bpf: #269 BPF_MAXINSNS: Very long jump backwards jited:0 12 PASS test_bpf: #270 BPF_MAXINSNS: Edge hopping nuthouse jited:0 13257 PASS test_bpf: #271 BPF_MAXINSNS: Jump, gap, jump, ... jited:0 213 PASS test_bpf: #272 BPF_MAXINSNS: ld_abs+get_processor_id jited:0 19389 PASS test_bpf: #273 BPF_MAXINSNS: ld_abs+vlan_push/pop jited:0 19583 PASS For real world production programs the difference is noise. This patch is first step towards reducing interpreter stack consumption. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-30 20:31:28 +00:00
u64 tmp;
static const void *jumptable[256] = {
[0 ... 255] = &&default_label,
/* Now overwrite non-defaults ... */
/* 32 bit ALU operations */
[BPF_ALU | BPF_ADD | BPF_X] = &&ALU_ADD_X,
[BPF_ALU | BPF_ADD | BPF_K] = &&ALU_ADD_K,
[BPF_ALU | BPF_SUB | BPF_X] = &&ALU_SUB_X,
[BPF_ALU | BPF_SUB | BPF_K] = &&ALU_SUB_K,
[BPF_ALU | BPF_AND | BPF_X] = &&ALU_AND_X,
[BPF_ALU | BPF_AND | BPF_K] = &&ALU_AND_K,
[BPF_ALU | BPF_OR | BPF_X] = &&ALU_OR_X,
[BPF_ALU | BPF_OR | BPF_K] = &&ALU_OR_K,
[BPF_ALU | BPF_LSH | BPF_X] = &&ALU_LSH_X,
[BPF_ALU | BPF_LSH | BPF_K] = &&ALU_LSH_K,
[BPF_ALU | BPF_RSH | BPF_X] = &&ALU_RSH_X,
[BPF_ALU | BPF_RSH | BPF_K] = &&ALU_RSH_K,
[BPF_ALU | BPF_XOR | BPF_X] = &&ALU_XOR_X,
[BPF_ALU | BPF_XOR | BPF_K] = &&ALU_XOR_K,
[BPF_ALU | BPF_MUL | BPF_X] = &&ALU_MUL_X,
[BPF_ALU | BPF_MUL | BPF_K] = &&ALU_MUL_K,
[BPF_ALU | BPF_MOV | BPF_X] = &&ALU_MOV_X,
[BPF_ALU | BPF_MOV | BPF_K] = &&ALU_MOV_K,
[BPF_ALU | BPF_DIV | BPF_X] = &&ALU_DIV_X,
[BPF_ALU | BPF_DIV | BPF_K] = &&ALU_DIV_K,
[BPF_ALU | BPF_MOD | BPF_X] = &&ALU_MOD_X,
[BPF_ALU | BPF_MOD | BPF_K] = &&ALU_MOD_K,
[BPF_ALU | BPF_NEG] = &&ALU_NEG,
[BPF_ALU | BPF_END | BPF_TO_BE] = &&ALU_END_TO_BE,
[BPF_ALU | BPF_END | BPF_TO_LE] = &&ALU_END_TO_LE,
/* 64 bit ALU operations */
[BPF_ALU64 | BPF_ADD | BPF_X] = &&ALU64_ADD_X,
[BPF_ALU64 | BPF_ADD | BPF_K] = &&ALU64_ADD_K,
[BPF_ALU64 | BPF_SUB | BPF_X] = &&ALU64_SUB_X,
[BPF_ALU64 | BPF_SUB | BPF_K] = &&ALU64_SUB_K,
[BPF_ALU64 | BPF_AND | BPF_X] = &&ALU64_AND_X,
[BPF_ALU64 | BPF_AND | BPF_K] = &&ALU64_AND_K,
[BPF_ALU64 | BPF_OR | BPF_X] = &&ALU64_OR_X,
[BPF_ALU64 | BPF_OR | BPF_K] = &&ALU64_OR_K,
[BPF_ALU64 | BPF_LSH | BPF_X] = &&ALU64_LSH_X,
[BPF_ALU64 | BPF_LSH | BPF_K] = &&ALU64_LSH_K,
[BPF_ALU64 | BPF_RSH | BPF_X] = &&ALU64_RSH_X,
[BPF_ALU64 | BPF_RSH | BPF_K] = &&ALU64_RSH_K,
[BPF_ALU64 | BPF_XOR | BPF_X] = &&ALU64_XOR_X,
[BPF_ALU64 | BPF_XOR | BPF_K] = &&ALU64_XOR_K,
[BPF_ALU64 | BPF_MUL | BPF_X] = &&ALU64_MUL_X,
[BPF_ALU64 | BPF_MUL | BPF_K] = &&ALU64_MUL_K,
[BPF_ALU64 | BPF_MOV | BPF_X] = &&ALU64_MOV_X,
[BPF_ALU64 | BPF_MOV | BPF_K] = &&ALU64_MOV_K,
[BPF_ALU64 | BPF_ARSH | BPF_X] = &&ALU64_ARSH_X,
[BPF_ALU64 | BPF_ARSH | BPF_K] = &&ALU64_ARSH_K,
[BPF_ALU64 | BPF_DIV | BPF_X] = &&ALU64_DIV_X,
[BPF_ALU64 | BPF_DIV | BPF_K] = &&ALU64_DIV_K,
[BPF_ALU64 | BPF_MOD | BPF_X] = &&ALU64_MOD_X,
[BPF_ALU64 | BPF_MOD | BPF_K] = &&ALU64_MOD_K,
[BPF_ALU64 | BPF_NEG] = &&ALU64_NEG,
/* Call instruction */
[BPF_JMP | BPF_CALL] = &&JMP_CALL,
[BPF_JMP | BPF_CALL_ARGS] = &&JMP_CALL_ARGS,
[BPF_JMP | BPF_TAIL_CALL] = &&JMP_TAIL_CALL,
/* Jumps */
[BPF_JMP | BPF_JA] = &&JMP_JA,
[BPF_JMP | BPF_JEQ | BPF_X] = &&JMP_JEQ_X,
[BPF_JMP | BPF_JEQ | BPF_K] = &&JMP_JEQ_K,
[BPF_JMP | BPF_JNE | BPF_X] = &&JMP_JNE_X,
[BPF_JMP | BPF_JNE | BPF_K] = &&JMP_JNE_K,
[BPF_JMP | BPF_JGT | BPF_X] = &&JMP_JGT_X,
[BPF_JMP | BPF_JGT | BPF_K] = &&JMP_JGT_K,
bpf: add BPF_J{LT,LE,SLT,SLE} instructions Currently, eBPF only understands BPF_JGT (>), BPF_JGE (>=), BPF_JSGT (s>), BPF_JSGE (s>=) instructions, this means that particularly *JLT/*JLE counterparts involving immediates need to be rewritten from e.g. X < [IMM] by swapping arguments into [IMM] > X, meaning the immediate first is required to be loaded into a register Y := [IMM], such that then we can compare with Y > X. Note that the destination operand is always required to be a register. This has the downside of having unnecessarily increased register pressure, meaning complex program would need to spill other registers temporarily to stack in order to obtain an unused register for the [IMM]. Loading to registers will thus also affect state pruning since we need to account for that register use and potentially those registers that had to be spilled/filled again. As a consequence slightly more stack space might have been used due to spilling, and BPF programs are a bit longer due to extra code involving the register load and potentially required spill/fills. Thus, add BPF_JLT (<), BPF_JLE (<=), BPF_JSLT (s<), BPF_JSLE (s<=) counterparts to the eBPF instruction set. Modifying LLVM to remove the NegateCC() workaround in a PoC patch at [1] and allowing it to also emit the new instructions resulted in cilium's BPF programs that are injected into the fast-path to have a reduced program length in the range of 2-3% (e.g. accumulated main and tail call sections from one of the object file reduced from 4864 to 4729 insns), reduced complexity in the range of 10-30% (e.g. accumulated sections reduced in one of the cases from 116432 to 88428 insns), and reduced stack usage in the range of 1-5% (e.g. accumulated sections from one of the object files reduced from 824 to 784b). The modification for LLVM will be incorporated in a backwards compatible way. Plan is for LLVM to have i) a target specific option to offer a possibility to explicitly enable the extension by the user (as we have with -m target specific extensions today for various CPU insns), and ii) have the kernel checked for presence of the extensions and enable them transparently when the user is selecting more aggressive options such as -march=native in a bpf target context. (Other frontends generating BPF byte code, e.g. ply can probe the kernel directly for its code generation.) [1] https://github.com/borkmann/llvm/tree/bpf-insns Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-09 23:39:55 +00:00
[BPF_JMP | BPF_JLT | BPF_X] = &&JMP_JLT_X,
[BPF_JMP | BPF_JLT | BPF_K] = &&JMP_JLT_K,
[BPF_JMP | BPF_JGE | BPF_X] = &&JMP_JGE_X,
[BPF_JMP | BPF_JGE | BPF_K] = &&JMP_JGE_K,
bpf: add BPF_J{LT,LE,SLT,SLE} instructions Currently, eBPF only understands BPF_JGT (>), BPF_JGE (>=), BPF_JSGT (s>), BPF_JSGE (s>=) instructions, this means that particularly *JLT/*JLE counterparts involving immediates need to be rewritten from e.g. X < [IMM] by swapping arguments into [IMM] > X, meaning the immediate first is required to be loaded into a register Y := [IMM], such that then we can compare with Y > X. Note that the destination operand is always required to be a register. This has the downside of having unnecessarily increased register pressure, meaning complex program would need to spill other registers temporarily to stack in order to obtain an unused register for the [IMM]. Loading to registers will thus also affect state pruning since we need to account for that register use and potentially those registers that had to be spilled/filled again. As a consequence slightly more stack space might have been used due to spilling, and BPF programs are a bit longer due to extra code involving the register load and potentially required spill/fills. Thus, add BPF_JLT (<), BPF_JLE (<=), BPF_JSLT (s<), BPF_JSLE (s<=) counterparts to the eBPF instruction set. Modifying LLVM to remove the NegateCC() workaround in a PoC patch at [1] and allowing it to also emit the new instructions resulted in cilium's BPF programs that are injected into the fast-path to have a reduced program length in the range of 2-3% (e.g. accumulated main and tail call sections from one of the object file reduced from 4864 to 4729 insns), reduced complexity in the range of 10-30% (e.g. accumulated sections reduced in one of the cases from 116432 to 88428 insns), and reduced stack usage in the range of 1-5% (e.g. accumulated sections from one of the object files reduced from 824 to 784b). The modification for LLVM will be incorporated in a backwards compatible way. Plan is for LLVM to have i) a target specific option to offer a possibility to explicitly enable the extension by the user (as we have with -m target specific extensions today for various CPU insns), and ii) have the kernel checked for presence of the extensions and enable them transparently when the user is selecting more aggressive options such as -march=native in a bpf target context. (Other frontends generating BPF byte code, e.g. ply can probe the kernel directly for its code generation.) [1] https://github.com/borkmann/llvm/tree/bpf-insns Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-09 23:39:55 +00:00
[BPF_JMP | BPF_JLE | BPF_X] = &&JMP_JLE_X,
[BPF_JMP | BPF_JLE | BPF_K] = &&JMP_JLE_K,
[BPF_JMP | BPF_JSGT | BPF_X] = &&JMP_JSGT_X,
[BPF_JMP | BPF_JSGT | BPF_K] = &&JMP_JSGT_K,
bpf: add BPF_J{LT,LE,SLT,SLE} instructions Currently, eBPF only understands BPF_JGT (>), BPF_JGE (>=), BPF_JSGT (s>), BPF_JSGE (s>=) instructions, this means that particularly *JLT/*JLE counterparts involving immediates need to be rewritten from e.g. X < [IMM] by swapping arguments into [IMM] > X, meaning the immediate first is required to be loaded into a register Y := [IMM], such that then we can compare with Y > X. Note that the destination operand is always required to be a register. This has the downside of having unnecessarily increased register pressure, meaning complex program would need to spill other registers temporarily to stack in order to obtain an unused register for the [IMM]. Loading to registers will thus also affect state pruning since we need to account for that register use and potentially those registers that had to be spilled/filled again. As a consequence slightly more stack space might have been used due to spilling, and BPF programs are a bit longer due to extra code involving the register load and potentially required spill/fills. Thus, add BPF_JLT (<), BPF_JLE (<=), BPF_JSLT (s<), BPF_JSLE (s<=) counterparts to the eBPF instruction set. Modifying LLVM to remove the NegateCC() workaround in a PoC patch at [1] and allowing it to also emit the new instructions resulted in cilium's BPF programs that are injected into the fast-path to have a reduced program length in the range of 2-3% (e.g. accumulated main and tail call sections from one of the object file reduced from 4864 to 4729 insns), reduced complexity in the range of 10-30% (e.g. accumulated sections reduced in one of the cases from 116432 to 88428 insns), and reduced stack usage in the range of 1-5% (e.g. accumulated sections from one of the object files reduced from 824 to 784b). The modification for LLVM will be incorporated in a backwards compatible way. Plan is for LLVM to have i) a target specific option to offer a possibility to explicitly enable the extension by the user (as we have with -m target specific extensions today for various CPU insns), and ii) have the kernel checked for presence of the extensions and enable them transparently when the user is selecting more aggressive options such as -march=native in a bpf target context. (Other frontends generating BPF byte code, e.g. ply can probe the kernel directly for its code generation.) [1] https://github.com/borkmann/llvm/tree/bpf-insns Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-09 23:39:55 +00:00
[BPF_JMP | BPF_JSLT | BPF_X] = &&JMP_JSLT_X,
[BPF_JMP | BPF_JSLT | BPF_K] = &&JMP_JSLT_K,
[BPF_JMP | BPF_JSGE | BPF_X] = &&JMP_JSGE_X,
[BPF_JMP | BPF_JSGE | BPF_K] = &&JMP_JSGE_K,
bpf: add BPF_J{LT,LE,SLT,SLE} instructions Currently, eBPF only understands BPF_JGT (>), BPF_JGE (>=), BPF_JSGT (s>), BPF_JSGE (s>=) instructions, this means that particularly *JLT/*JLE counterparts involving immediates need to be rewritten from e.g. X < [IMM] by swapping arguments into [IMM] > X, meaning the immediate first is required to be loaded into a register Y := [IMM], such that then we can compare with Y > X. Note that the destination operand is always required to be a register. This has the downside of having unnecessarily increased register pressure, meaning complex program would need to spill other registers temporarily to stack in order to obtain an unused register for the [IMM]. Loading to registers will thus also affect state pruning since we need to account for that register use and potentially those registers that had to be spilled/filled again. As a consequence slightly more stack space might have been used due to spilling, and BPF programs are a bit longer due to extra code involving the register load and potentially required spill/fills. Thus, add BPF_JLT (<), BPF_JLE (<=), BPF_JSLT (s<), BPF_JSLE (s<=) counterparts to the eBPF instruction set. Modifying LLVM to remove the NegateCC() workaround in a PoC patch at [1] and allowing it to also emit the new instructions resulted in cilium's BPF programs that are injected into the fast-path to have a reduced program length in the range of 2-3% (e.g. accumulated main and tail call sections from one of the object file reduced from 4864 to 4729 insns), reduced complexity in the range of 10-30% (e.g. accumulated sections reduced in one of the cases from 116432 to 88428 insns), and reduced stack usage in the range of 1-5% (e.g. accumulated sections from one of the object files reduced from 824 to 784b). The modification for LLVM will be incorporated in a backwards compatible way. Plan is for LLVM to have i) a target specific option to offer a possibility to explicitly enable the extension by the user (as we have with -m target specific extensions today for various CPU insns), and ii) have the kernel checked for presence of the extensions and enable them transparently when the user is selecting more aggressive options such as -march=native in a bpf target context. (Other frontends generating BPF byte code, e.g. ply can probe the kernel directly for its code generation.) [1] https://github.com/borkmann/llvm/tree/bpf-insns Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-09 23:39:55 +00:00
[BPF_JMP | BPF_JSLE | BPF_X] = &&JMP_JSLE_X,
[BPF_JMP | BPF_JSLE | BPF_K] = &&JMP_JSLE_K,
[BPF_JMP | BPF_JSET | BPF_X] = &&JMP_JSET_X,
[BPF_JMP | BPF_JSET | BPF_K] = &&JMP_JSET_K,
/* Program return */
[BPF_JMP | BPF_EXIT] = &&JMP_EXIT,
/* Store instructions */
[BPF_STX | BPF_MEM | BPF_B] = &&STX_MEM_B,
[BPF_STX | BPF_MEM | BPF_H] = &&STX_MEM_H,
[BPF_STX | BPF_MEM | BPF_W] = &&STX_MEM_W,
[BPF_STX | BPF_MEM | BPF_DW] = &&STX_MEM_DW,
[BPF_STX | BPF_XADD | BPF_W] = &&STX_XADD_W,
[BPF_STX | BPF_XADD | BPF_DW] = &&STX_XADD_DW,
[BPF_ST | BPF_MEM | BPF_B] = &&ST_MEM_B,
[BPF_ST | BPF_MEM | BPF_H] = &&ST_MEM_H,
[BPF_ST | BPF_MEM | BPF_W] = &&ST_MEM_W,
[BPF_ST | BPF_MEM | BPF_DW] = &&ST_MEM_DW,
/* Load instructions */
[BPF_LDX | BPF_MEM | BPF_B] = &&LDX_MEM_B,
[BPF_LDX | BPF_MEM | BPF_H] = &&LDX_MEM_H,
[BPF_LDX | BPF_MEM | BPF_W] = &&LDX_MEM_W,
[BPF_LDX | BPF_MEM | BPF_DW] = &&LDX_MEM_DW,
[BPF_LD | BPF_ABS | BPF_W] = &&LD_ABS_W,
[BPF_LD | BPF_ABS | BPF_H] = &&LD_ABS_H,
[BPF_LD | BPF_ABS | BPF_B] = &&LD_ABS_B,
[BPF_LD | BPF_IND | BPF_W] = &&LD_IND_W,
[BPF_LD | BPF_IND | BPF_H] = &&LD_IND_H,
[BPF_LD | BPF_IND | BPF_B] = &&LD_IND_B,
net: filter: add "load 64-bit immediate" eBPF instruction add BPF_LD_IMM64 instruction to load 64-bit immediate value into a register. All previous instructions were 8-byte. This is first 16-byte instruction. Two consecutive 'struct bpf_insn' blocks are interpreted as single instruction: insn[0].code = BPF_LD | BPF_DW | BPF_IMM insn[0].dst_reg = destination register insn[0].imm = lower 32-bit insn[1].code = 0 insn[1].imm = upper 32-bit All unused fields must be zero. Classic BPF has similar instruction: BPF_LD | BPF_W | BPF_IMM which loads 32-bit immediate value into a register. x64 JITs it as single 'movabsq %rax, imm64' arm64 may JIT as sequence of four 'movk x0, #imm16, lsl #shift' insn Note that old eBPF programs are binary compatible with new interpreter. It helps eBPF programs load 64-bit constant into a register with one instruction instead of using two registers and 4 instructions: BPF_MOV32_IMM(R1, imm32) BPF_ALU64_IMM(BPF_LSH, R1, 32) BPF_MOV32_IMM(R2, imm32) BPF_ALU64_REG(BPF_OR, R1, R2) User space generated programs will use this instruction to load constants only. To tell kernel that user space needs a pointer the _pseudo_ variant of this instruction may be added later, which will use extra bits of encoding to indicate what type of pointer user space is asking kernel to provide. For example 'off' or 'src_reg' fields can be used for such purpose. src_reg = 1 could mean that user space is asking kernel to validate and load in-kernel map pointer. src_reg = 2 could mean that user space needs readonly data section pointer src_reg = 3 could mean that user space needs a pointer to per-cpu local data All such future pseudo instructions will not be carrying the actual pointer as part of the instruction, but rather will be treated as a request to kernel to provide one. The kernel will verify the request_for_a_pointer, then will drop _pseudo_ marking and will store actual internal pointer inside the instruction, so the end result is the interpreter and JITs never see pseudo BPF_LD_IMM64 insns and only operate on generic BPF_LD_IMM64 that loads 64-bit immediate into a register. User space never operates on direct pointers and verifier can easily recognize request_for_pointer vs other instructions. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-05 05:17:17 +00:00
[BPF_LD | BPF_IMM | BPF_DW] = &&LD_IMM_DW,
};
bpf: allow bpf programs to tail-call other bpf programs introduce bpf_tail_call(ctx, &jmp_table, index) helper function which can be used from BPF programs like: int bpf_prog(struct pt_regs *ctx) { ... bpf_tail_call(ctx, &jmp_table, index); ... } that is roughly equivalent to: int bpf_prog(struct pt_regs *ctx) { ... if (jmp_table[index]) return (*jmp_table[index])(ctx); ... } The important detail that it's not a normal call, but a tail call. The kernel stack is precious, so this helper reuses the current stack frame and jumps into another BPF program without adding extra call frame. It's trivially done in interpreter and a bit trickier in JITs. In case of x64 JIT the bigger part of generated assembler prologue is common for all programs, so it is simply skipped while jumping. Other JITs can do similar prologue-skipping optimization or do stack unwind before jumping into the next program. bpf_tail_call() arguments: ctx - context pointer jmp_table - one of BPF_MAP_TYPE_PROG_ARRAY maps used as the jump table index - index in the jump table Since all BPF programs are idenitified by file descriptor, user space need to populate the jmp_table with FDs of other BPF programs. If jmp_table[index] is empty the bpf_tail_call() doesn't jump anywhere and program execution continues as normal. New BPF_MAP_TYPE_PROG_ARRAY map type is introduced so that user space can populate this jmp_table array with FDs of other bpf programs. Programs can share the same jmp_table array or use multiple jmp_tables. The chain of tail calls can form unpredictable dynamic loops therefore tail_call_cnt is used to limit the number of calls and currently is set to 32. Use cases: Acked-by: Daniel Borkmann <daniel@iogearbox.net> ========== - simplify complex programs by splitting them into a sequence of small programs - dispatch routine For tracing and future seccomp the program may be triggered on all system calls, but processing of syscall arguments will be different. It's more efficient to implement them as: int syscall_entry(struct seccomp_data *ctx) { bpf_tail_call(ctx, &syscall_jmp_table, ctx->nr /* syscall number */); ... default: process unknown syscall ... } int sys_write_event(struct seccomp_data *ctx) {...} int sys_read_event(struct seccomp_data *ctx) {...} syscall_jmp_table[__NR_write] = sys_write_event; syscall_jmp_table[__NR_read] = sys_read_event; For networking the program may call into different parsers depending on packet format, like: int packet_parser(struct __sk_buff *skb) { ... parse L2, L3 here ... __u8 ipproto = load_byte(skb, ... offsetof(struct iphdr, protocol)); bpf_tail_call(skb, &ipproto_jmp_table, ipproto); ... default: process unknown protocol ... } int parse_tcp(struct __sk_buff *skb) {...} int parse_udp(struct __sk_buff *skb) {...} ipproto_jmp_table[IPPROTO_TCP] = parse_tcp; ipproto_jmp_table[IPPROTO_UDP] = parse_udp; - for TC use case, bpf_tail_call() allows to implement reclassify-like logic - bpf_map_update_elem/delete calls into BPF_MAP_TYPE_PROG_ARRAY jump table are atomic, so user space can build chains of BPF programs on the fly Implementation details: ======================= - high performance of bpf_tail_call() is the goal. It could have been implemented without JIT changes as a wrapper on top of BPF_PROG_RUN() macro, but with two downsides: . all programs would have to pay performance penalty for this feature and tail call itself would be slower, since mandatory stack unwind, return, stack allocate would be done for every tailcall. . tailcall would be limited to programs running preempt_disabled, since generic 'void *ctx' doesn't have room for 'tail_call_cnt' and it would need to be either global per_cpu variable accessed by helper and by wrapper or global variable protected by locks. In this implementation x64 JIT bypasses stack unwind and jumps into the callee program after prologue. - bpf_prog_array_compatible() ensures that prog_type of callee and caller are the same and JITed/non-JITed flag is the same, since calling JITed program from non-JITed is invalid, since stack frames are different. Similarly calling kprobe type program from socket type program is invalid. - jump table is implemented as BPF_MAP_TYPE_PROG_ARRAY to reuse 'map' abstraction, its user space API and all of verifier logic. It's in the existing arraymap.c file, since several functions are shared with regular array map. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-19 23:59:03 +00:00
u32 tail_call_cnt = 0;
void *ptr;
int off;
#define CONT ({ insn++; goto select_insn; })
#define CONT_JMP ({ insn++; goto select_insn; })
select_insn:
goto *jumptable[insn->code];
/* ALU */
#define ALU(OPCODE, OP) \
ALU64_##OPCODE##_X: \
DST = DST OP SRC; \
CONT; \
ALU_##OPCODE##_X: \
DST = (u32) DST OP (u32) SRC; \
CONT; \
ALU64_##OPCODE##_K: \
DST = DST OP IMM; \
CONT; \
ALU_##OPCODE##_K: \
DST = (u32) DST OP (u32) IMM; \
CONT;
ALU(ADD, +)
ALU(SUB, -)
ALU(AND, &)
ALU(OR, |)
ALU(LSH, <<)
ALU(RSH, >>)
ALU(XOR, ^)
ALU(MUL, *)
#undef ALU
ALU_NEG:
DST = (u32) -DST;
CONT;
ALU64_NEG:
DST = -DST;
CONT;
ALU_MOV_X:
DST = (u32) SRC;
CONT;
ALU_MOV_K:
DST = (u32) IMM;
CONT;
ALU64_MOV_X:
DST = SRC;
CONT;
ALU64_MOV_K:
DST = IMM;
CONT;
net: filter: add "load 64-bit immediate" eBPF instruction add BPF_LD_IMM64 instruction to load 64-bit immediate value into a register. All previous instructions were 8-byte. This is first 16-byte instruction. Two consecutive 'struct bpf_insn' blocks are interpreted as single instruction: insn[0].code = BPF_LD | BPF_DW | BPF_IMM insn[0].dst_reg = destination register insn[0].imm = lower 32-bit insn[1].code = 0 insn[1].imm = upper 32-bit All unused fields must be zero. Classic BPF has similar instruction: BPF_LD | BPF_W | BPF_IMM which loads 32-bit immediate value into a register. x64 JITs it as single 'movabsq %rax, imm64' arm64 may JIT as sequence of four 'movk x0, #imm16, lsl #shift' insn Note that old eBPF programs are binary compatible with new interpreter. It helps eBPF programs load 64-bit constant into a register with one instruction instead of using two registers and 4 instructions: BPF_MOV32_IMM(R1, imm32) BPF_ALU64_IMM(BPF_LSH, R1, 32) BPF_MOV32_IMM(R2, imm32) BPF_ALU64_REG(BPF_OR, R1, R2) User space generated programs will use this instruction to load constants only. To tell kernel that user space needs a pointer the _pseudo_ variant of this instruction may be added later, which will use extra bits of encoding to indicate what type of pointer user space is asking kernel to provide. For example 'off' or 'src_reg' fields can be used for such purpose. src_reg = 1 could mean that user space is asking kernel to validate and load in-kernel map pointer. src_reg = 2 could mean that user space needs readonly data section pointer src_reg = 3 could mean that user space needs a pointer to per-cpu local data All such future pseudo instructions will not be carrying the actual pointer as part of the instruction, but rather will be treated as a request to kernel to provide one. The kernel will verify the request_for_a_pointer, then will drop _pseudo_ marking and will store actual internal pointer inside the instruction, so the end result is the interpreter and JITs never see pseudo BPF_LD_IMM64 insns and only operate on generic BPF_LD_IMM64 that loads 64-bit immediate into a register. User space never operates on direct pointers and verifier can easily recognize request_for_pointer vs other instructions. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-05 05:17:17 +00:00
LD_IMM_DW:
DST = (u64) (u32) insn[0].imm | ((u64) (u32) insn[1].imm) << 32;
insn++;
CONT;
ALU64_ARSH_X:
(*(s64 *) &DST) >>= SRC;
CONT;
ALU64_ARSH_K:
(*(s64 *) &DST) >>= IMM;
CONT;
ALU64_MOD_X:
if (unlikely(SRC == 0))
return 0;
div64_u64_rem(DST, SRC, &tmp);
DST = tmp;
CONT;
ALU_MOD_X:
if (unlikely(SRC == 0))
return 0;
tmp = (u32) DST;
DST = do_div(tmp, (u32) SRC);
CONT;
ALU64_MOD_K:
div64_u64_rem(DST, IMM, &tmp);
DST = tmp;
CONT;
ALU_MOD_K:
tmp = (u32) DST;
DST = do_div(tmp, (u32) IMM);
CONT;
ALU64_DIV_X:
if (unlikely(SRC == 0))
return 0;
DST = div64_u64(DST, SRC);
CONT;
ALU_DIV_X:
if (unlikely(SRC == 0))
return 0;
tmp = (u32) DST;
do_div(tmp, (u32) SRC);
DST = (u32) tmp;
CONT;
ALU64_DIV_K:
DST = div64_u64(DST, IMM);
CONT;
ALU_DIV_K:
tmp = (u32) DST;
do_div(tmp, (u32) IMM);
DST = (u32) tmp;
CONT;
ALU_END_TO_BE:
switch (IMM) {
case 16:
DST = (__force u16) cpu_to_be16(DST);
break;
case 32:
DST = (__force u32) cpu_to_be32(DST);
break;
case 64:
DST = (__force u64) cpu_to_be64(DST);
break;
}
CONT;
ALU_END_TO_LE:
switch (IMM) {
case 16:
DST = (__force u16) cpu_to_le16(DST);
break;
case 32:
DST = (__force u32) cpu_to_le32(DST);
break;
case 64:
DST = (__force u64) cpu_to_le64(DST);
break;
}
CONT;
/* CALL */
JMP_CALL:
/* Function call scratches BPF_R1-BPF_R5 registers,
* preserves BPF_R6-BPF_R9, and stores return value
* into BPF_R0.
*/
BPF_R0 = (__bpf_call_base + insn->imm)(BPF_R1, BPF_R2, BPF_R3,
BPF_R4, BPF_R5);
CONT;
JMP_CALL_ARGS:
BPF_R0 = (__bpf_call_base_args + insn->imm)(BPF_R1, BPF_R2,
BPF_R3, BPF_R4,
BPF_R5,
insn + insn->off + 1);
CONT;
bpf: allow bpf programs to tail-call other bpf programs introduce bpf_tail_call(ctx, &jmp_table, index) helper function which can be used from BPF programs like: int bpf_prog(struct pt_regs *ctx) { ... bpf_tail_call(ctx, &jmp_table, index); ... } that is roughly equivalent to: int bpf_prog(struct pt_regs *ctx) { ... if (jmp_table[index]) return (*jmp_table[index])(ctx); ... } The important detail that it's not a normal call, but a tail call. The kernel stack is precious, so this helper reuses the current stack frame and jumps into another BPF program without adding extra call frame. It's trivially done in interpreter and a bit trickier in JITs. In case of x64 JIT the bigger part of generated assembler prologue is common for all programs, so it is simply skipped while jumping. Other JITs can do similar prologue-skipping optimization or do stack unwind before jumping into the next program. bpf_tail_call() arguments: ctx - context pointer jmp_table - one of BPF_MAP_TYPE_PROG_ARRAY maps used as the jump table index - index in the jump table Since all BPF programs are idenitified by file descriptor, user space need to populate the jmp_table with FDs of other BPF programs. If jmp_table[index] is empty the bpf_tail_call() doesn't jump anywhere and program execution continues as normal. New BPF_MAP_TYPE_PROG_ARRAY map type is introduced so that user space can populate this jmp_table array with FDs of other bpf programs. Programs can share the same jmp_table array or use multiple jmp_tables. The chain of tail calls can form unpredictable dynamic loops therefore tail_call_cnt is used to limit the number of calls and currently is set to 32. Use cases: Acked-by: Daniel Borkmann <daniel@iogearbox.net> ========== - simplify complex programs by splitting them into a sequence of small programs - dispatch routine For tracing and future seccomp the program may be triggered on all system calls, but processing of syscall arguments will be different. It's more efficient to implement them as: int syscall_entry(struct seccomp_data *ctx) { bpf_tail_call(ctx, &syscall_jmp_table, ctx->nr /* syscall number */); ... default: process unknown syscall ... } int sys_write_event(struct seccomp_data *ctx) {...} int sys_read_event(struct seccomp_data *ctx) {...} syscall_jmp_table[__NR_write] = sys_write_event; syscall_jmp_table[__NR_read] = sys_read_event; For networking the program may call into different parsers depending on packet format, like: int packet_parser(struct __sk_buff *skb) { ... parse L2, L3 here ... __u8 ipproto = load_byte(skb, ... offsetof(struct iphdr, protocol)); bpf_tail_call(skb, &ipproto_jmp_table, ipproto); ... default: process unknown protocol ... } int parse_tcp(struct __sk_buff *skb) {...} int parse_udp(struct __sk_buff *skb) {...} ipproto_jmp_table[IPPROTO_TCP] = parse_tcp; ipproto_jmp_table[IPPROTO_UDP] = parse_udp; - for TC use case, bpf_tail_call() allows to implement reclassify-like logic - bpf_map_update_elem/delete calls into BPF_MAP_TYPE_PROG_ARRAY jump table are atomic, so user space can build chains of BPF programs on the fly Implementation details: ======================= - high performance of bpf_tail_call() is the goal. It could have been implemented without JIT changes as a wrapper on top of BPF_PROG_RUN() macro, but with two downsides: . all programs would have to pay performance penalty for this feature and tail call itself would be slower, since mandatory stack unwind, return, stack allocate would be done for every tailcall. . tailcall would be limited to programs running preempt_disabled, since generic 'void *ctx' doesn't have room for 'tail_call_cnt' and it would need to be either global per_cpu variable accessed by helper and by wrapper or global variable protected by locks. In this implementation x64 JIT bypasses stack unwind and jumps into the callee program after prologue. - bpf_prog_array_compatible() ensures that prog_type of callee and caller are the same and JITed/non-JITed flag is the same, since calling JITed program from non-JITed is invalid, since stack frames are different. Similarly calling kprobe type program from socket type program is invalid. - jump table is implemented as BPF_MAP_TYPE_PROG_ARRAY to reuse 'map' abstraction, its user space API and all of verifier logic. It's in the existing arraymap.c file, since several functions are shared with regular array map. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-19 23:59:03 +00:00
JMP_TAIL_CALL: {
struct bpf_map *map = (struct bpf_map *) (unsigned long) BPF_R2;
struct bpf_array *array = container_of(map, struct bpf_array, map);
struct bpf_prog *prog;
u32 index = BPF_R3;
bpf: allow bpf programs to tail-call other bpf programs introduce bpf_tail_call(ctx, &jmp_table, index) helper function which can be used from BPF programs like: int bpf_prog(struct pt_regs *ctx) { ... bpf_tail_call(ctx, &jmp_table, index); ... } that is roughly equivalent to: int bpf_prog(struct pt_regs *ctx) { ... if (jmp_table[index]) return (*jmp_table[index])(ctx); ... } The important detail that it's not a normal call, but a tail call. The kernel stack is precious, so this helper reuses the current stack frame and jumps into another BPF program without adding extra call frame. It's trivially done in interpreter and a bit trickier in JITs. In case of x64 JIT the bigger part of generated assembler prologue is common for all programs, so it is simply skipped while jumping. Other JITs can do similar prologue-skipping optimization or do stack unwind before jumping into the next program. bpf_tail_call() arguments: ctx - context pointer jmp_table - one of BPF_MAP_TYPE_PROG_ARRAY maps used as the jump table index - index in the jump table Since all BPF programs are idenitified by file descriptor, user space need to populate the jmp_table with FDs of other BPF programs. If jmp_table[index] is empty the bpf_tail_call() doesn't jump anywhere and program execution continues as normal. New BPF_MAP_TYPE_PROG_ARRAY map type is introduced so that user space can populate this jmp_table array with FDs of other bpf programs. Programs can share the same jmp_table array or use multiple jmp_tables. The chain of tail calls can form unpredictable dynamic loops therefore tail_call_cnt is used to limit the number of calls and currently is set to 32. Use cases: Acked-by: Daniel Borkmann <daniel@iogearbox.net> ========== - simplify complex programs by splitting them into a sequence of small programs - dispatch routine For tracing and future seccomp the program may be triggered on all system calls, but processing of syscall arguments will be different. It's more efficient to implement them as: int syscall_entry(struct seccomp_data *ctx) { bpf_tail_call(ctx, &syscall_jmp_table, ctx->nr /* syscall number */); ... default: process unknown syscall ... } int sys_write_event(struct seccomp_data *ctx) {...} int sys_read_event(struct seccomp_data *ctx) {...} syscall_jmp_table[__NR_write] = sys_write_event; syscall_jmp_table[__NR_read] = sys_read_event; For networking the program may call into different parsers depending on packet format, like: int packet_parser(struct __sk_buff *skb) { ... parse L2, L3 here ... __u8 ipproto = load_byte(skb, ... offsetof(struct iphdr, protocol)); bpf_tail_call(skb, &ipproto_jmp_table, ipproto); ... default: process unknown protocol ... } int parse_tcp(struct __sk_buff *skb) {...} int parse_udp(struct __sk_buff *skb) {...} ipproto_jmp_table[IPPROTO_TCP] = parse_tcp; ipproto_jmp_table[IPPROTO_UDP] = parse_udp; - for TC use case, bpf_tail_call() allows to implement reclassify-like logic - bpf_map_update_elem/delete calls into BPF_MAP_TYPE_PROG_ARRAY jump table are atomic, so user space can build chains of BPF programs on the fly Implementation details: ======================= - high performance of bpf_tail_call() is the goal. It could have been implemented without JIT changes as a wrapper on top of BPF_PROG_RUN() macro, but with two downsides: . all programs would have to pay performance penalty for this feature and tail call itself would be slower, since mandatory stack unwind, return, stack allocate would be done for every tailcall. . tailcall would be limited to programs running preempt_disabled, since generic 'void *ctx' doesn't have room for 'tail_call_cnt' and it would need to be either global per_cpu variable accessed by helper and by wrapper or global variable protected by locks. In this implementation x64 JIT bypasses stack unwind and jumps into the callee program after prologue. - bpf_prog_array_compatible() ensures that prog_type of callee and caller are the same and JITed/non-JITed flag is the same, since calling JITed program from non-JITed is invalid, since stack frames are different. Similarly calling kprobe type program from socket type program is invalid. - jump table is implemented as BPF_MAP_TYPE_PROG_ARRAY to reuse 'map' abstraction, its user space API and all of verifier logic. It's in the existing arraymap.c file, since several functions are shared with regular array map. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-19 23:59:03 +00:00
if (unlikely(index >= array->map.max_entries))
goto out;
if (unlikely(tail_call_cnt > MAX_TAIL_CALL_CNT))
goto out;
tail_call_cnt++;
prog = READ_ONCE(array->ptrs[index]);
if (!prog)
bpf: allow bpf programs to tail-call other bpf programs introduce bpf_tail_call(ctx, &jmp_table, index) helper function which can be used from BPF programs like: int bpf_prog(struct pt_regs *ctx) { ... bpf_tail_call(ctx, &jmp_table, index); ... } that is roughly equivalent to: int bpf_prog(struct pt_regs *ctx) { ... if (jmp_table[index]) return (*jmp_table[index])(ctx); ... } The important detail that it's not a normal call, but a tail call. The kernel stack is precious, so this helper reuses the current stack frame and jumps into another BPF program without adding extra call frame. It's trivially done in interpreter and a bit trickier in JITs. In case of x64 JIT the bigger part of generated assembler prologue is common for all programs, so it is simply skipped while jumping. Other JITs can do similar prologue-skipping optimization or do stack unwind before jumping into the next program. bpf_tail_call() arguments: ctx - context pointer jmp_table - one of BPF_MAP_TYPE_PROG_ARRAY maps used as the jump table index - index in the jump table Since all BPF programs are idenitified by file descriptor, user space need to populate the jmp_table with FDs of other BPF programs. If jmp_table[index] is empty the bpf_tail_call() doesn't jump anywhere and program execution continues as normal. New BPF_MAP_TYPE_PROG_ARRAY map type is introduced so that user space can populate this jmp_table array with FDs of other bpf programs. Programs can share the same jmp_table array or use multiple jmp_tables. The chain of tail calls can form unpredictable dynamic loops therefore tail_call_cnt is used to limit the number of calls and currently is set to 32. Use cases: Acked-by: Daniel Borkmann <daniel@iogearbox.net> ========== - simplify complex programs by splitting them into a sequence of small programs - dispatch routine For tracing and future seccomp the program may be triggered on all system calls, but processing of syscall arguments will be different. It's more efficient to implement them as: int syscall_entry(struct seccomp_data *ctx) { bpf_tail_call(ctx, &syscall_jmp_table, ctx->nr /* syscall number */); ... default: process unknown syscall ... } int sys_write_event(struct seccomp_data *ctx) {...} int sys_read_event(struct seccomp_data *ctx) {...} syscall_jmp_table[__NR_write] = sys_write_event; syscall_jmp_table[__NR_read] = sys_read_event; For networking the program may call into different parsers depending on packet format, like: int packet_parser(struct __sk_buff *skb) { ... parse L2, L3 here ... __u8 ipproto = load_byte(skb, ... offsetof(struct iphdr, protocol)); bpf_tail_call(skb, &ipproto_jmp_table, ipproto); ... default: process unknown protocol ... } int parse_tcp(struct __sk_buff *skb) {...} int parse_udp(struct __sk_buff *skb) {...} ipproto_jmp_table[IPPROTO_TCP] = parse_tcp; ipproto_jmp_table[IPPROTO_UDP] = parse_udp; - for TC use case, bpf_tail_call() allows to implement reclassify-like logic - bpf_map_update_elem/delete calls into BPF_MAP_TYPE_PROG_ARRAY jump table are atomic, so user space can build chains of BPF programs on the fly Implementation details: ======================= - high performance of bpf_tail_call() is the goal. It could have been implemented without JIT changes as a wrapper on top of BPF_PROG_RUN() macro, but with two downsides: . all programs would have to pay performance penalty for this feature and tail call itself would be slower, since mandatory stack unwind, return, stack allocate would be done for every tailcall. . tailcall would be limited to programs running preempt_disabled, since generic 'void *ctx' doesn't have room for 'tail_call_cnt' and it would need to be either global per_cpu variable accessed by helper and by wrapper or global variable protected by locks. In this implementation x64 JIT bypasses stack unwind and jumps into the callee program after prologue. - bpf_prog_array_compatible() ensures that prog_type of callee and caller are the same and JITed/non-JITed flag is the same, since calling JITed program from non-JITed is invalid, since stack frames are different. Similarly calling kprobe type program from socket type program is invalid. - jump table is implemented as BPF_MAP_TYPE_PROG_ARRAY to reuse 'map' abstraction, its user space API and all of verifier logic. It's in the existing arraymap.c file, since several functions are shared with regular array map. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-19 23:59:03 +00:00
goto out;
/* ARG1 at this point is guaranteed to point to CTX from
* the verifier side due to the fact that the tail call is
* handeled like a helper, that is, bpf_tail_call_proto,
* where arg1_type is ARG_PTR_TO_CTX.
*/
bpf: allow bpf programs to tail-call other bpf programs introduce bpf_tail_call(ctx, &jmp_table, index) helper function which can be used from BPF programs like: int bpf_prog(struct pt_regs *ctx) { ... bpf_tail_call(ctx, &jmp_table, index); ... } that is roughly equivalent to: int bpf_prog(struct pt_regs *ctx) { ... if (jmp_table[index]) return (*jmp_table[index])(ctx); ... } The important detail that it's not a normal call, but a tail call. The kernel stack is precious, so this helper reuses the current stack frame and jumps into another BPF program without adding extra call frame. It's trivially done in interpreter and a bit trickier in JITs. In case of x64 JIT the bigger part of generated assembler prologue is common for all programs, so it is simply skipped while jumping. Other JITs can do similar prologue-skipping optimization or do stack unwind before jumping into the next program. bpf_tail_call() arguments: ctx - context pointer jmp_table - one of BPF_MAP_TYPE_PROG_ARRAY maps used as the jump table index - index in the jump table Since all BPF programs are idenitified by file descriptor, user space need to populate the jmp_table with FDs of other BPF programs. If jmp_table[index] is empty the bpf_tail_call() doesn't jump anywhere and program execution continues as normal. New BPF_MAP_TYPE_PROG_ARRAY map type is introduced so that user space can populate this jmp_table array with FDs of other bpf programs. Programs can share the same jmp_table array or use multiple jmp_tables. The chain of tail calls can form unpredictable dynamic loops therefore tail_call_cnt is used to limit the number of calls and currently is set to 32. Use cases: Acked-by: Daniel Borkmann <daniel@iogearbox.net> ========== - simplify complex programs by splitting them into a sequence of small programs - dispatch routine For tracing and future seccomp the program may be triggered on all system calls, but processing of syscall arguments will be different. It's more efficient to implement them as: int syscall_entry(struct seccomp_data *ctx) { bpf_tail_call(ctx, &syscall_jmp_table, ctx->nr /* syscall number */); ... default: process unknown syscall ... } int sys_write_event(struct seccomp_data *ctx) {...} int sys_read_event(struct seccomp_data *ctx) {...} syscall_jmp_table[__NR_write] = sys_write_event; syscall_jmp_table[__NR_read] = sys_read_event; For networking the program may call into different parsers depending on packet format, like: int packet_parser(struct __sk_buff *skb) { ... parse L2, L3 here ... __u8 ipproto = load_byte(skb, ... offsetof(struct iphdr, protocol)); bpf_tail_call(skb, &ipproto_jmp_table, ipproto); ... default: process unknown protocol ... } int parse_tcp(struct __sk_buff *skb) {...} int parse_udp(struct __sk_buff *skb) {...} ipproto_jmp_table[IPPROTO_TCP] = parse_tcp; ipproto_jmp_table[IPPROTO_UDP] = parse_udp; - for TC use case, bpf_tail_call() allows to implement reclassify-like logic - bpf_map_update_elem/delete calls into BPF_MAP_TYPE_PROG_ARRAY jump table are atomic, so user space can build chains of BPF programs on the fly Implementation details: ======================= - high performance of bpf_tail_call() is the goal. It could have been implemented without JIT changes as a wrapper on top of BPF_PROG_RUN() macro, but with two downsides: . all programs would have to pay performance penalty for this feature and tail call itself would be slower, since mandatory stack unwind, return, stack allocate would be done for every tailcall. . tailcall would be limited to programs running preempt_disabled, since generic 'void *ctx' doesn't have room for 'tail_call_cnt' and it would need to be either global per_cpu variable accessed by helper and by wrapper or global variable protected by locks. In this implementation x64 JIT bypasses stack unwind and jumps into the callee program after prologue. - bpf_prog_array_compatible() ensures that prog_type of callee and caller are the same and JITed/non-JITed flag is the same, since calling JITed program from non-JITed is invalid, since stack frames are different. Similarly calling kprobe type program from socket type program is invalid. - jump table is implemented as BPF_MAP_TYPE_PROG_ARRAY to reuse 'map' abstraction, its user space API and all of verifier logic. It's in the existing arraymap.c file, since several functions are shared with regular array map. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-19 23:59:03 +00:00
insn = prog->insnsi;
goto select_insn;
out:
CONT;
}
/* JMP */
JMP_JA:
insn += insn->off;
CONT;
JMP_JEQ_X:
if (DST == SRC) {
insn += insn->off;
CONT_JMP;
}
CONT;
JMP_JEQ_K:
if (DST == IMM) {
insn += insn->off;
CONT_JMP;
}
CONT;
JMP_JNE_X:
if (DST != SRC) {
insn += insn->off;
CONT_JMP;
}
CONT;
JMP_JNE_K:
if (DST != IMM) {
insn += insn->off;
CONT_JMP;
}
CONT;
JMP_JGT_X:
if (DST > SRC) {
insn += insn->off;
CONT_JMP;
}
CONT;
JMP_JGT_K:
if (DST > IMM) {
insn += insn->off;
CONT_JMP;
}
CONT;
bpf: add BPF_J{LT,LE,SLT,SLE} instructions Currently, eBPF only understands BPF_JGT (>), BPF_JGE (>=), BPF_JSGT (s>), BPF_JSGE (s>=) instructions, this means that particularly *JLT/*JLE counterparts involving immediates need to be rewritten from e.g. X < [IMM] by swapping arguments into [IMM] > X, meaning the immediate first is required to be loaded into a register Y := [IMM], such that then we can compare with Y > X. Note that the destination operand is always required to be a register. This has the downside of having unnecessarily increased register pressure, meaning complex program would need to spill other registers temporarily to stack in order to obtain an unused register for the [IMM]. Loading to registers will thus also affect state pruning since we need to account for that register use and potentially those registers that had to be spilled/filled again. As a consequence slightly more stack space might have been used due to spilling, and BPF programs are a bit longer due to extra code involving the register load and potentially required spill/fills. Thus, add BPF_JLT (<), BPF_JLE (<=), BPF_JSLT (s<), BPF_JSLE (s<=) counterparts to the eBPF instruction set. Modifying LLVM to remove the NegateCC() workaround in a PoC patch at [1] and allowing it to also emit the new instructions resulted in cilium's BPF programs that are injected into the fast-path to have a reduced program length in the range of 2-3% (e.g. accumulated main and tail call sections from one of the object file reduced from 4864 to 4729 insns), reduced complexity in the range of 10-30% (e.g. accumulated sections reduced in one of the cases from 116432 to 88428 insns), and reduced stack usage in the range of 1-5% (e.g. accumulated sections from one of the object files reduced from 824 to 784b). The modification for LLVM will be incorporated in a backwards compatible way. Plan is for LLVM to have i) a target specific option to offer a possibility to explicitly enable the extension by the user (as we have with -m target specific extensions today for various CPU insns), and ii) have the kernel checked for presence of the extensions and enable them transparently when the user is selecting more aggressive options such as -march=native in a bpf target context. (Other frontends generating BPF byte code, e.g. ply can probe the kernel directly for its code generation.) [1] https://github.com/borkmann/llvm/tree/bpf-insns Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-09 23:39:55 +00:00
JMP_JLT_X:
if (DST < SRC) {
insn += insn->off;
CONT_JMP;
}
CONT;
JMP_JLT_K:
if (DST < IMM) {
insn += insn->off;
CONT_JMP;
}
CONT;
JMP_JGE_X:
if (DST >= SRC) {
insn += insn->off;
CONT_JMP;
}
CONT;
JMP_JGE_K:
if (DST >= IMM) {
insn += insn->off;
CONT_JMP;
}
CONT;
bpf: add BPF_J{LT,LE,SLT,SLE} instructions Currently, eBPF only understands BPF_JGT (>), BPF_JGE (>=), BPF_JSGT (s>), BPF_JSGE (s>=) instructions, this means that particularly *JLT/*JLE counterparts involving immediates need to be rewritten from e.g. X < [IMM] by swapping arguments into [IMM] > X, meaning the immediate first is required to be loaded into a register Y := [IMM], such that then we can compare with Y > X. Note that the destination operand is always required to be a register. This has the downside of having unnecessarily increased register pressure, meaning complex program would need to spill other registers temporarily to stack in order to obtain an unused register for the [IMM]. Loading to registers will thus also affect state pruning since we need to account for that register use and potentially those registers that had to be spilled/filled again. As a consequence slightly more stack space might have been used due to spilling, and BPF programs are a bit longer due to extra code involving the register load and potentially required spill/fills. Thus, add BPF_JLT (<), BPF_JLE (<=), BPF_JSLT (s<), BPF_JSLE (s<=) counterparts to the eBPF instruction set. Modifying LLVM to remove the NegateCC() workaround in a PoC patch at [1] and allowing it to also emit the new instructions resulted in cilium's BPF programs that are injected into the fast-path to have a reduced program length in the range of 2-3% (e.g. accumulated main and tail call sections from one of the object file reduced from 4864 to 4729 insns), reduced complexity in the range of 10-30% (e.g. accumulated sections reduced in one of the cases from 116432 to 88428 insns), and reduced stack usage in the range of 1-5% (e.g. accumulated sections from one of the object files reduced from 824 to 784b). The modification for LLVM will be incorporated in a backwards compatible way. Plan is for LLVM to have i) a target specific option to offer a possibility to explicitly enable the extension by the user (as we have with -m target specific extensions today for various CPU insns), and ii) have the kernel checked for presence of the extensions and enable them transparently when the user is selecting more aggressive options such as -march=native in a bpf target context. (Other frontends generating BPF byte code, e.g. ply can probe the kernel directly for its code generation.) [1] https://github.com/borkmann/llvm/tree/bpf-insns Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-09 23:39:55 +00:00
JMP_JLE_X:
if (DST <= SRC) {
insn += insn->off;
CONT_JMP;
}
CONT;
JMP_JLE_K:
if (DST <= IMM) {
insn += insn->off;
CONT_JMP;
}
CONT;
JMP_JSGT_X:
if (((s64) DST) > ((s64) SRC)) {
insn += insn->off;
CONT_JMP;
}
CONT;
JMP_JSGT_K:
if (((s64) DST) > ((s64) IMM)) {
insn += insn->off;
CONT_JMP;
}
CONT;
bpf: add BPF_J{LT,LE,SLT,SLE} instructions Currently, eBPF only understands BPF_JGT (>), BPF_JGE (>=), BPF_JSGT (s>), BPF_JSGE (s>=) instructions, this means that particularly *JLT/*JLE counterparts involving immediates need to be rewritten from e.g. X < [IMM] by swapping arguments into [IMM] > X, meaning the immediate first is required to be loaded into a register Y := [IMM], such that then we can compare with Y > X. Note that the destination operand is always required to be a register. This has the downside of having unnecessarily increased register pressure, meaning complex program would need to spill other registers temporarily to stack in order to obtain an unused register for the [IMM]. Loading to registers will thus also affect state pruning since we need to account for that register use and potentially those registers that had to be spilled/filled again. As a consequence slightly more stack space might have been used due to spilling, and BPF programs are a bit longer due to extra code involving the register load and potentially required spill/fills. Thus, add BPF_JLT (<), BPF_JLE (<=), BPF_JSLT (s<), BPF_JSLE (s<=) counterparts to the eBPF instruction set. Modifying LLVM to remove the NegateCC() workaround in a PoC patch at [1] and allowing it to also emit the new instructions resulted in cilium's BPF programs that are injected into the fast-path to have a reduced program length in the range of 2-3% (e.g. accumulated main and tail call sections from one of the object file reduced from 4864 to 4729 insns), reduced complexity in the range of 10-30% (e.g. accumulated sections reduced in one of the cases from 116432 to 88428 insns), and reduced stack usage in the range of 1-5% (e.g. accumulated sections from one of the object files reduced from 824 to 784b). The modification for LLVM will be incorporated in a backwards compatible way. Plan is for LLVM to have i) a target specific option to offer a possibility to explicitly enable the extension by the user (as we have with -m target specific extensions today for various CPU insns), and ii) have the kernel checked for presence of the extensions and enable them transparently when the user is selecting more aggressive options such as -march=native in a bpf target context. (Other frontends generating BPF byte code, e.g. ply can probe the kernel directly for its code generation.) [1] https://github.com/borkmann/llvm/tree/bpf-insns Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-09 23:39:55 +00:00
JMP_JSLT_X:
if (((s64) DST) < ((s64) SRC)) {
insn += insn->off;
CONT_JMP;
}
CONT;
JMP_JSLT_K:
if (((s64) DST) < ((s64) IMM)) {
insn += insn->off;
CONT_JMP;
}
CONT;
JMP_JSGE_X:
if (((s64) DST) >= ((s64) SRC)) {
insn += insn->off;
CONT_JMP;
}
CONT;
JMP_JSGE_K:
if (((s64) DST) >= ((s64) IMM)) {
insn += insn->off;
CONT_JMP;
}
CONT;
bpf: add BPF_J{LT,LE,SLT,SLE} instructions Currently, eBPF only understands BPF_JGT (>), BPF_JGE (>=), BPF_JSGT (s>), BPF_JSGE (s>=) instructions, this means that particularly *JLT/*JLE counterparts involving immediates need to be rewritten from e.g. X < [IMM] by swapping arguments into [IMM] > X, meaning the immediate first is required to be loaded into a register Y := [IMM], such that then we can compare with Y > X. Note that the destination operand is always required to be a register. This has the downside of having unnecessarily increased register pressure, meaning complex program would need to spill other registers temporarily to stack in order to obtain an unused register for the [IMM]. Loading to registers will thus also affect state pruning since we need to account for that register use and potentially those registers that had to be spilled/filled again. As a consequence slightly more stack space might have been used due to spilling, and BPF programs are a bit longer due to extra code involving the register load and potentially required spill/fills. Thus, add BPF_JLT (<), BPF_JLE (<=), BPF_JSLT (s<), BPF_JSLE (s<=) counterparts to the eBPF instruction set. Modifying LLVM to remove the NegateCC() workaround in a PoC patch at [1] and allowing it to also emit the new instructions resulted in cilium's BPF programs that are injected into the fast-path to have a reduced program length in the range of 2-3% (e.g. accumulated main and tail call sections from one of the object file reduced from 4864 to 4729 insns), reduced complexity in the range of 10-30% (e.g. accumulated sections reduced in one of the cases from 116432 to 88428 insns), and reduced stack usage in the range of 1-5% (e.g. accumulated sections from one of the object files reduced from 824 to 784b). The modification for LLVM will be incorporated in a backwards compatible way. Plan is for LLVM to have i) a target specific option to offer a possibility to explicitly enable the extension by the user (as we have with -m target specific extensions today for various CPU insns), and ii) have the kernel checked for presence of the extensions and enable them transparently when the user is selecting more aggressive options such as -march=native in a bpf target context. (Other frontends generating BPF byte code, e.g. ply can probe the kernel directly for its code generation.) [1] https://github.com/borkmann/llvm/tree/bpf-insns Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-09 23:39:55 +00:00
JMP_JSLE_X:
if (((s64) DST) <= ((s64) SRC)) {
insn += insn->off;
CONT_JMP;
}
CONT;
JMP_JSLE_K:
if (((s64) DST) <= ((s64) IMM)) {
insn += insn->off;
CONT_JMP;
}
CONT;
JMP_JSET_X:
if (DST & SRC) {
insn += insn->off;
CONT_JMP;
}
CONT;
JMP_JSET_K:
if (DST & IMM) {
insn += insn->off;
CONT_JMP;
}
CONT;
JMP_EXIT:
return BPF_R0;
/* STX and ST and LDX*/
#define LDST(SIZEOP, SIZE) \
STX_MEM_##SIZEOP: \
*(SIZE *)(unsigned long) (DST + insn->off) = SRC; \
CONT; \
ST_MEM_##SIZEOP: \
*(SIZE *)(unsigned long) (DST + insn->off) = IMM; \
CONT; \
LDX_MEM_##SIZEOP: \
DST = *(SIZE *)(unsigned long) (SRC + insn->off); \
CONT;
LDST(B, u8)
LDST(H, u16)
LDST(W, u32)
LDST(DW, u64)
#undef LDST
STX_XADD_W: /* lock xadd *(u32 *)(dst_reg + off16) += src_reg */
atomic_add((u32) SRC, (atomic_t *)(unsigned long)
(DST + insn->off));
CONT;
STX_XADD_DW: /* lock xadd *(u64 *)(dst_reg + off16) += src_reg */
atomic64_add((u64) SRC, (atomic64_t *)(unsigned long)
(DST + insn->off));
CONT;
LD_ABS_W: /* BPF_R0 = ntohl(*(u32 *) (skb->data + imm32)) */
off = IMM;
load_word:
/* BPF_LD + BPD_ABS and BPF_LD + BPF_IND insns are only
* appearing in the programs where ctx == skb
* (see may_access_skb() in the verifier). All programs
* keep 'ctx' in regs[BPF_REG_CTX] == BPF_R6,
* bpf_convert_filter() saves it in BPF_R6, internal BPF
* verifier will check that BPF_R6 == ctx.
*
* BPF_ABS and BPF_IND are wrappers of function calls,
* so they scratch BPF_R1-BPF_R5 registers, preserve
* BPF_R6-BPF_R9, and store return value into BPF_R0.
*
* Implicit input:
* ctx == skb == BPF_R6 == CTX
*
* Explicit input:
* SRC == any register
* IMM == 32-bit immediate
*
* Output:
* BPF_R0 - 8/16/32-bit skb data converted to cpu endianness
*/
ptr = bpf_load_pointer((struct sk_buff *) (unsigned long) CTX, off, 4, &tmp);
if (likely(ptr != NULL)) {
BPF_R0 = get_unaligned_be32(ptr);
CONT;
}
return 0;
LD_ABS_H: /* BPF_R0 = ntohs(*(u16 *) (skb->data + imm32)) */
off = IMM;
load_half:
ptr = bpf_load_pointer((struct sk_buff *) (unsigned long) CTX, off, 2, &tmp);
if (likely(ptr != NULL)) {
BPF_R0 = get_unaligned_be16(ptr);
CONT;
}
return 0;
LD_ABS_B: /* BPF_R0 = *(u8 *) (skb->data + imm32) */
off = IMM;
load_byte:
ptr = bpf_load_pointer((struct sk_buff *) (unsigned long) CTX, off, 1, &tmp);
if (likely(ptr != NULL)) {
BPF_R0 = *(u8 *)ptr;
CONT;
}
return 0;
LD_IND_W: /* BPF_R0 = ntohl(*(u32 *) (skb->data + src_reg + imm32)) */
off = IMM + SRC;
goto load_word;
LD_IND_H: /* BPF_R0 = ntohs(*(u16 *) (skb->data + src_reg + imm32)) */
off = IMM + SRC;
goto load_half;
LD_IND_B: /* BPF_R0 = *(u8 *) (skb->data + src_reg + imm32) */
off = IMM + SRC;
goto load_byte;
default_label:
/* If we ever reach this, we have a bug somewhere. */
WARN_RATELIMIT(1, "unknown opcode %02x\n", insn->code);
return 0;
}
bpf: split bpf core interpreter split __bpf_prog_run() interpreter into stack allocation and execution parts. The code section shrinks which helps interpreter performance in some cases. text data bss dec hex filename 26350 10328 624 37302 91b6 kernel/bpf/core.o.before 25777 10328 624 36729 8f79 kernel/bpf/core.o.after Very short programs got slower (due to extra function call): Before: test_bpf: #89 ALU64_ADD_K: 1 + 2 = 3 jited:0 7 PASS test_bpf: #90 ALU64_ADD_K: 3 + 0 = 3 jited:0 8 PASS test_bpf: #91 ALU64_ADD_K: 1 + 2147483646 = 2147483647 jited:0 7 PASS test_bpf: #92 ALU64_ADD_K: 4294967294 + 2 = 4294967296 jited:0 11 PASS test_bpf: #93 ALU64_ADD_K: 2147483646 + -2147483647 = -1 jited:0 7 PASS After: test_bpf: #89 ALU64_ADD_K: 1 + 2 = 3 jited:0 11 PASS test_bpf: #90 ALU64_ADD_K: 3 + 0 = 3 jited:0 11 PASS test_bpf: #91 ALU64_ADD_K: 1 + 2147483646 = 2147483647 jited:0 11 PASS test_bpf: #92 ALU64_ADD_K: 4294967294 + 2 = 4294967296 jited:0 14 PASS test_bpf: #93 ALU64_ADD_K: 2147483646 + -2147483647 = -1 jited:0 10 PASS Longer programs got faster: Before: test_bpf: #266 BPF_MAXINSNS: Ctx heavy transformations jited:0 20286 20513 PASS test_bpf: #267 BPF_MAXINSNS: Call heavy transformations jited:0 31853 31768 PASS test_bpf: #268 BPF_MAXINSNS: Jump heavy test jited:0 9815 PASS test_bpf: #269 BPF_MAXINSNS: Very long jump backwards jited:0 6 PASS test_bpf: #270 BPF_MAXINSNS: Edge hopping nuthouse jited:0 13959 PASS test_bpf: #271 BPF_MAXINSNS: Jump, gap, jump, ... jited:0 210 PASS test_bpf: #272 BPF_MAXINSNS: ld_abs+get_processor_id jited:0 21724 PASS test_bpf: #273 BPF_MAXINSNS: ld_abs+vlan_push/pop jited:0 19118 PASS After: test_bpf: #266 BPF_MAXINSNS: Ctx heavy transformations jited:0 19008 18827 PASS test_bpf: #267 BPF_MAXINSNS: Call heavy transformations jited:0 29238 28450 PASS test_bpf: #268 BPF_MAXINSNS: Jump heavy test jited:0 9485 PASS test_bpf: #269 BPF_MAXINSNS: Very long jump backwards jited:0 12 PASS test_bpf: #270 BPF_MAXINSNS: Edge hopping nuthouse jited:0 13257 PASS test_bpf: #271 BPF_MAXINSNS: Jump, gap, jump, ... jited:0 213 PASS test_bpf: #272 BPF_MAXINSNS: ld_abs+get_processor_id jited:0 19389 PASS test_bpf: #273 BPF_MAXINSNS: ld_abs+vlan_push/pop jited:0 19583 PASS For real world production programs the difference is noise. This patch is first step towards reducing interpreter stack consumption. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-30 20:31:28 +00:00
STACK_FRAME_NON_STANDARD(___bpf_prog_run); /* jump table */
#define PROG_NAME(stack_size) __bpf_prog_run##stack_size
#define DEFINE_BPF_PROG_RUN(stack_size) \
static unsigned int PROG_NAME(stack_size)(const void *ctx, const struct bpf_insn *insn) \
{ \
u64 stack[stack_size / sizeof(u64)]; \
u64 regs[MAX_BPF_REG]; \
\
FP = (u64) (unsigned long) &stack[ARRAY_SIZE(stack)]; \
ARG1 = (u64) (unsigned long) ctx; \
return ___bpf_prog_run(regs, insn, stack); \
bpf: split bpf core interpreter split __bpf_prog_run() interpreter into stack allocation and execution parts. The code section shrinks which helps interpreter performance in some cases. text data bss dec hex filename 26350 10328 624 37302 91b6 kernel/bpf/core.o.before 25777 10328 624 36729 8f79 kernel/bpf/core.o.after Very short programs got slower (due to extra function call): Before: test_bpf: #89 ALU64_ADD_K: 1 + 2 = 3 jited:0 7 PASS test_bpf: #90 ALU64_ADD_K: 3 + 0 = 3 jited:0 8 PASS test_bpf: #91 ALU64_ADD_K: 1 + 2147483646 = 2147483647 jited:0 7 PASS test_bpf: #92 ALU64_ADD_K: 4294967294 + 2 = 4294967296 jited:0 11 PASS test_bpf: #93 ALU64_ADD_K: 2147483646 + -2147483647 = -1 jited:0 7 PASS After: test_bpf: #89 ALU64_ADD_K: 1 + 2 = 3 jited:0 11 PASS test_bpf: #90 ALU64_ADD_K: 3 + 0 = 3 jited:0 11 PASS test_bpf: #91 ALU64_ADD_K: 1 + 2147483646 = 2147483647 jited:0 11 PASS test_bpf: #92 ALU64_ADD_K: 4294967294 + 2 = 4294967296 jited:0 14 PASS test_bpf: #93 ALU64_ADD_K: 2147483646 + -2147483647 = -1 jited:0 10 PASS Longer programs got faster: Before: test_bpf: #266 BPF_MAXINSNS: Ctx heavy transformations jited:0 20286 20513 PASS test_bpf: #267 BPF_MAXINSNS: Call heavy transformations jited:0 31853 31768 PASS test_bpf: #268 BPF_MAXINSNS: Jump heavy test jited:0 9815 PASS test_bpf: #269 BPF_MAXINSNS: Very long jump backwards jited:0 6 PASS test_bpf: #270 BPF_MAXINSNS: Edge hopping nuthouse jited:0 13959 PASS test_bpf: #271 BPF_MAXINSNS: Jump, gap, jump, ... jited:0 210 PASS test_bpf: #272 BPF_MAXINSNS: ld_abs+get_processor_id jited:0 21724 PASS test_bpf: #273 BPF_MAXINSNS: ld_abs+vlan_push/pop jited:0 19118 PASS After: test_bpf: #266 BPF_MAXINSNS: Ctx heavy transformations jited:0 19008 18827 PASS test_bpf: #267 BPF_MAXINSNS: Call heavy transformations jited:0 29238 28450 PASS test_bpf: #268 BPF_MAXINSNS: Jump heavy test jited:0 9485 PASS test_bpf: #269 BPF_MAXINSNS: Very long jump backwards jited:0 12 PASS test_bpf: #270 BPF_MAXINSNS: Edge hopping nuthouse jited:0 13257 PASS test_bpf: #271 BPF_MAXINSNS: Jump, gap, jump, ... jited:0 213 PASS test_bpf: #272 BPF_MAXINSNS: ld_abs+get_processor_id jited:0 19389 PASS test_bpf: #273 BPF_MAXINSNS: ld_abs+vlan_push/pop jited:0 19583 PASS For real world production programs the difference is noise. This patch is first step towards reducing interpreter stack consumption. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-30 20:31:28 +00:00
}
#define PROG_NAME_ARGS(stack_size) __bpf_prog_run_args##stack_size
#define DEFINE_BPF_PROG_RUN_ARGS(stack_size) \
static u64 PROG_NAME_ARGS(stack_size)(u64 r1, u64 r2, u64 r3, u64 r4, u64 r5, \
const struct bpf_insn *insn) \
{ \
u64 stack[stack_size / sizeof(u64)]; \
u64 regs[MAX_BPF_REG]; \
\
FP = (u64) (unsigned long) &stack[ARRAY_SIZE(stack)]; \
BPF_R1 = r1; \
BPF_R2 = r2; \
BPF_R3 = r3; \
BPF_R4 = r4; \
BPF_R5 = r5; \
return ___bpf_prog_run(regs, insn, stack); \
}
#define EVAL1(FN, X) FN(X)
#define EVAL2(FN, X, Y...) FN(X) EVAL1(FN, Y)
#define EVAL3(FN, X, Y...) FN(X) EVAL2(FN, Y)
#define EVAL4(FN, X, Y...) FN(X) EVAL3(FN, Y)
#define EVAL5(FN, X, Y...) FN(X) EVAL4(FN, Y)
#define EVAL6(FN, X, Y...) FN(X) EVAL5(FN, Y)
EVAL6(DEFINE_BPF_PROG_RUN, 32, 64, 96, 128, 160, 192);
EVAL6(DEFINE_BPF_PROG_RUN, 224, 256, 288, 320, 352, 384);
EVAL4(DEFINE_BPF_PROG_RUN, 416, 448, 480, 512);
EVAL6(DEFINE_BPF_PROG_RUN_ARGS, 32, 64, 96, 128, 160, 192);
EVAL6(DEFINE_BPF_PROG_RUN_ARGS, 224, 256, 288, 320, 352, 384);
EVAL4(DEFINE_BPF_PROG_RUN_ARGS, 416, 448, 480, 512);
#define PROG_NAME_LIST(stack_size) PROG_NAME(stack_size),
static unsigned int (*interpreters[])(const void *ctx,
const struct bpf_insn *insn) = {
EVAL6(PROG_NAME_LIST, 32, 64, 96, 128, 160, 192)
EVAL6(PROG_NAME_LIST, 224, 256, 288, 320, 352, 384)
EVAL4(PROG_NAME_LIST, 416, 448, 480, 512)
};
#undef PROG_NAME_LIST
#define PROG_NAME_LIST(stack_size) PROG_NAME_ARGS(stack_size),
static u64 (*interpreters_args[])(u64 r1, u64 r2, u64 r3, u64 r4, u64 r5,
const struct bpf_insn *insn) = {
EVAL6(PROG_NAME_LIST, 32, 64, 96, 128, 160, 192)
EVAL6(PROG_NAME_LIST, 224, 256, 288, 320, 352, 384)
EVAL4(PROG_NAME_LIST, 416, 448, 480, 512)
};
#undef PROG_NAME_LIST
void bpf_patch_call_args(struct bpf_insn *insn, u32 stack_depth)
{
stack_depth = max_t(u32, stack_depth, 1);
insn->off = (s16) insn->imm;
insn->imm = interpreters_args[(round_up(stack_depth, 32) / 32) - 1] -
__bpf_call_base_args;
insn->code = BPF_JMP | BPF_CALL_ARGS;
}
bpf: introduce BPF_JIT_ALWAYS_ON config The BPF interpreter has been used as part of the spectre 2 attack CVE-2017-5715. A quote from goolge project zero blog: "At this point, it would normally be necessary to locate gadgets in the host kernel code that can be used to actually leak data by reading from an attacker-controlled location, shifting and masking the result appropriately and then using the result of that as offset to an attacker-controlled address for a load. But piecing gadgets together and figuring out which ones work in a speculation context seems annoying. So instead, we decided to use the eBPF interpreter, which is built into the host kernel - while there is no legitimate way to invoke it from inside a VM, the presence of the code in the host kernel's text section is sufficient to make it usable for the attack, just like with ordinary ROP gadgets." To make attacker job harder introduce BPF_JIT_ALWAYS_ON config option that removes interpreter from the kernel in favor of JIT-only mode. So far eBPF JIT is supported by: x64, arm64, arm32, sparc64, s390, powerpc64, mips64 The start of JITed program is randomized and code page is marked as read-only. In addition "constant blinding" can be turned on with net.core.bpf_jit_harden v2->v3: - move __bpf_prog_ret0 under ifdef (Daniel) v1->v2: - fix init order, test_bpf and cBPF (Daniel's feedback) - fix offloaded bpf (Jakub's feedback) - add 'return 0' dummy in case something can invoke prog->bpf_func - retarget bpf tree. For bpf-next the patch would need one extra hunk. It will be sent when the trees are merged back to net-next Considered doing: int bpf_jit_enable __read_mostly = BPF_EBPF_JIT_DEFAULT; but it seems better to land the patch as-is and in bpf-next remove bpf_jit_enable global variable from all JITs, consolidate in one place and remove this jit_init() function. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-01-09 18:04:29 +00:00
#else
static unsigned int __bpf_prog_ret0(const void *ctx,
const struct bpf_insn *insn)
{
return 0;
}
#endif
bool bpf_prog_array_compatible(struct bpf_array *array,
const struct bpf_prog *fp)
bpf: allow bpf programs to tail-call other bpf programs introduce bpf_tail_call(ctx, &jmp_table, index) helper function which can be used from BPF programs like: int bpf_prog(struct pt_regs *ctx) { ... bpf_tail_call(ctx, &jmp_table, index); ... } that is roughly equivalent to: int bpf_prog(struct pt_regs *ctx) { ... if (jmp_table[index]) return (*jmp_table[index])(ctx); ... } The important detail that it's not a normal call, but a tail call. The kernel stack is precious, so this helper reuses the current stack frame and jumps into another BPF program without adding extra call frame. It's trivially done in interpreter and a bit trickier in JITs. In case of x64 JIT the bigger part of generated assembler prologue is common for all programs, so it is simply skipped while jumping. Other JITs can do similar prologue-skipping optimization or do stack unwind before jumping into the next program. bpf_tail_call() arguments: ctx - context pointer jmp_table - one of BPF_MAP_TYPE_PROG_ARRAY maps used as the jump table index - index in the jump table Since all BPF programs are idenitified by file descriptor, user space need to populate the jmp_table with FDs of other BPF programs. If jmp_table[index] is empty the bpf_tail_call() doesn't jump anywhere and program execution continues as normal. New BPF_MAP_TYPE_PROG_ARRAY map type is introduced so that user space can populate this jmp_table array with FDs of other bpf programs. Programs can share the same jmp_table array or use multiple jmp_tables. The chain of tail calls can form unpredictable dynamic loops therefore tail_call_cnt is used to limit the number of calls and currently is set to 32. Use cases: Acked-by: Daniel Borkmann <daniel@iogearbox.net> ========== - simplify complex programs by splitting them into a sequence of small programs - dispatch routine For tracing and future seccomp the program may be triggered on all system calls, but processing of syscall arguments will be different. It's more efficient to implement them as: int syscall_entry(struct seccomp_data *ctx) { bpf_tail_call(ctx, &syscall_jmp_table, ctx->nr /* syscall number */); ... default: process unknown syscall ... } int sys_write_event(struct seccomp_data *ctx) {...} int sys_read_event(struct seccomp_data *ctx) {...} syscall_jmp_table[__NR_write] = sys_write_event; syscall_jmp_table[__NR_read] = sys_read_event; For networking the program may call into different parsers depending on packet format, like: int packet_parser(struct __sk_buff *skb) { ... parse L2, L3 here ... __u8 ipproto = load_byte(skb, ... offsetof(struct iphdr, protocol)); bpf_tail_call(skb, &ipproto_jmp_table, ipproto); ... default: process unknown protocol ... } int parse_tcp(struct __sk_buff *skb) {...} int parse_udp(struct __sk_buff *skb) {...} ipproto_jmp_table[IPPROTO_TCP] = parse_tcp; ipproto_jmp_table[IPPROTO_UDP] = parse_udp; - for TC use case, bpf_tail_call() allows to implement reclassify-like logic - bpf_map_update_elem/delete calls into BPF_MAP_TYPE_PROG_ARRAY jump table are atomic, so user space can build chains of BPF programs on the fly Implementation details: ======================= - high performance of bpf_tail_call() is the goal. It could have been implemented without JIT changes as a wrapper on top of BPF_PROG_RUN() macro, but with two downsides: . all programs would have to pay performance penalty for this feature and tail call itself would be slower, since mandatory stack unwind, return, stack allocate would be done for every tailcall. . tailcall would be limited to programs running preempt_disabled, since generic 'void *ctx' doesn't have room for 'tail_call_cnt' and it would need to be either global per_cpu variable accessed by helper and by wrapper or global variable protected by locks. In this implementation x64 JIT bypasses stack unwind and jumps into the callee program after prologue. - bpf_prog_array_compatible() ensures that prog_type of callee and caller are the same and JITed/non-JITed flag is the same, since calling JITed program from non-JITed is invalid, since stack frames are different. Similarly calling kprobe type program from socket type program is invalid. - jump table is implemented as BPF_MAP_TYPE_PROG_ARRAY to reuse 'map' abstraction, its user space API and all of verifier logic. It's in the existing arraymap.c file, since several functions are shared with regular array map. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-19 23:59:03 +00:00
{
if (fp->kprobe_override)
return false;
if (!array->owner_prog_type) {
/* There's no owner yet where we could check for
* compatibility.
*/
bpf: allow bpf programs to tail-call other bpf programs introduce bpf_tail_call(ctx, &jmp_table, index) helper function which can be used from BPF programs like: int bpf_prog(struct pt_regs *ctx) { ... bpf_tail_call(ctx, &jmp_table, index); ... } that is roughly equivalent to: int bpf_prog(struct pt_regs *ctx) { ... if (jmp_table[index]) return (*jmp_table[index])(ctx); ... } The important detail that it's not a normal call, but a tail call. The kernel stack is precious, so this helper reuses the current stack frame and jumps into another BPF program without adding extra call frame. It's trivially done in interpreter and a bit trickier in JITs. In case of x64 JIT the bigger part of generated assembler prologue is common for all programs, so it is simply skipped while jumping. Other JITs can do similar prologue-skipping optimization or do stack unwind before jumping into the next program. bpf_tail_call() arguments: ctx - context pointer jmp_table - one of BPF_MAP_TYPE_PROG_ARRAY maps used as the jump table index - index in the jump table Since all BPF programs are idenitified by file descriptor, user space need to populate the jmp_table with FDs of other BPF programs. If jmp_table[index] is empty the bpf_tail_call() doesn't jump anywhere and program execution continues as normal. New BPF_MAP_TYPE_PROG_ARRAY map type is introduced so that user space can populate this jmp_table array with FDs of other bpf programs. Programs can share the same jmp_table array or use multiple jmp_tables. The chain of tail calls can form unpredictable dynamic loops therefore tail_call_cnt is used to limit the number of calls and currently is set to 32. Use cases: Acked-by: Daniel Borkmann <daniel@iogearbox.net> ========== - simplify complex programs by splitting them into a sequence of small programs - dispatch routine For tracing and future seccomp the program may be triggered on all system calls, but processing of syscall arguments will be different. It's more efficient to implement them as: int syscall_entry(struct seccomp_data *ctx) { bpf_tail_call(ctx, &syscall_jmp_table, ctx->nr /* syscall number */); ... default: process unknown syscall ... } int sys_write_event(struct seccomp_data *ctx) {...} int sys_read_event(struct seccomp_data *ctx) {...} syscall_jmp_table[__NR_write] = sys_write_event; syscall_jmp_table[__NR_read] = sys_read_event; For networking the program may call into different parsers depending on packet format, like: int packet_parser(struct __sk_buff *skb) { ... parse L2, L3 here ... __u8 ipproto = load_byte(skb, ... offsetof(struct iphdr, protocol)); bpf_tail_call(skb, &ipproto_jmp_table, ipproto); ... default: process unknown protocol ... } int parse_tcp(struct __sk_buff *skb) {...} int parse_udp(struct __sk_buff *skb) {...} ipproto_jmp_table[IPPROTO_TCP] = parse_tcp; ipproto_jmp_table[IPPROTO_UDP] = parse_udp; - for TC use case, bpf_tail_call() allows to implement reclassify-like logic - bpf_map_update_elem/delete calls into BPF_MAP_TYPE_PROG_ARRAY jump table are atomic, so user space can build chains of BPF programs on the fly Implementation details: ======================= - high performance of bpf_tail_call() is the goal. It could have been implemented without JIT changes as a wrapper on top of BPF_PROG_RUN() macro, but with two downsides: . all programs would have to pay performance penalty for this feature and tail call itself would be slower, since mandatory stack unwind, return, stack allocate would be done for every tailcall. . tailcall would be limited to programs running preempt_disabled, since generic 'void *ctx' doesn't have room for 'tail_call_cnt' and it would need to be either global per_cpu variable accessed by helper and by wrapper or global variable protected by locks. In this implementation x64 JIT bypasses stack unwind and jumps into the callee program after prologue. - bpf_prog_array_compatible() ensures that prog_type of callee and caller are the same and JITed/non-JITed flag is the same, since calling JITed program from non-JITed is invalid, since stack frames are different. Similarly calling kprobe type program from socket type program is invalid. - jump table is implemented as BPF_MAP_TYPE_PROG_ARRAY to reuse 'map' abstraction, its user space API and all of verifier logic. It's in the existing arraymap.c file, since several functions are shared with regular array map. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-19 23:59:03 +00:00
array->owner_prog_type = fp->type;
array->owner_jited = fp->jited;
return true;
bpf: allow bpf programs to tail-call other bpf programs introduce bpf_tail_call(ctx, &jmp_table, index) helper function which can be used from BPF programs like: int bpf_prog(struct pt_regs *ctx) { ... bpf_tail_call(ctx, &jmp_table, index); ... } that is roughly equivalent to: int bpf_prog(struct pt_regs *ctx) { ... if (jmp_table[index]) return (*jmp_table[index])(ctx); ... } The important detail that it's not a normal call, but a tail call. The kernel stack is precious, so this helper reuses the current stack frame and jumps into another BPF program without adding extra call frame. It's trivially done in interpreter and a bit trickier in JITs. In case of x64 JIT the bigger part of generated assembler prologue is common for all programs, so it is simply skipped while jumping. Other JITs can do similar prologue-skipping optimization or do stack unwind before jumping into the next program. bpf_tail_call() arguments: ctx - context pointer jmp_table - one of BPF_MAP_TYPE_PROG_ARRAY maps used as the jump table index - index in the jump table Since all BPF programs are idenitified by file descriptor, user space need to populate the jmp_table with FDs of other BPF programs. If jmp_table[index] is empty the bpf_tail_call() doesn't jump anywhere and program execution continues as normal. New BPF_MAP_TYPE_PROG_ARRAY map type is introduced so that user space can populate this jmp_table array with FDs of other bpf programs. Programs can share the same jmp_table array or use multiple jmp_tables. The chain of tail calls can form unpredictable dynamic loops therefore tail_call_cnt is used to limit the number of calls and currently is set to 32. Use cases: Acked-by: Daniel Borkmann <daniel@iogearbox.net> ========== - simplify complex programs by splitting them into a sequence of small programs - dispatch routine For tracing and future seccomp the program may be triggered on all system calls, but processing of syscall arguments will be different. It's more efficient to implement them as: int syscall_entry(struct seccomp_data *ctx) { bpf_tail_call(ctx, &syscall_jmp_table, ctx->nr /* syscall number */); ... default: process unknown syscall ... } int sys_write_event(struct seccomp_data *ctx) {...} int sys_read_event(struct seccomp_data *ctx) {...} syscall_jmp_table[__NR_write] = sys_write_event; syscall_jmp_table[__NR_read] = sys_read_event; For networking the program may call into different parsers depending on packet format, like: int packet_parser(struct __sk_buff *skb) { ... parse L2, L3 here ... __u8 ipproto = load_byte(skb, ... offsetof(struct iphdr, protocol)); bpf_tail_call(skb, &ipproto_jmp_table, ipproto); ... default: process unknown protocol ... } int parse_tcp(struct __sk_buff *skb) {...} int parse_udp(struct __sk_buff *skb) {...} ipproto_jmp_table[IPPROTO_TCP] = parse_tcp; ipproto_jmp_table[IPPROTO_UDP] = parse_udp; - for TC use case, bpf_tail_call() allows to implement reclassify-like logic - bpf_map_update_elem/delete calls into BPF_MAP_TYPE_PROG_ARRAY jump table are atomic, so user space can build chains of BPF programs on the fly Implementation details: ======================= - high performance of bpf_tail_call() is the goal. It could have been implemented without JIT changes as a wrapper on top of BPF_PROG_RUN() macro, but with two downsides: . all programs would have to pay performance penalty for this feature and tail call itself would be slower, since mandatory stack unwind, return, stack allocate would be done for every tailcall. . tailcall would be limited to programs running preempt_disabled, since generic 'void *ctx' doesn't have room for 'tail_call_cnt' and it would need to be either global per_cpu variable accessed by helper and by wrapper or global variable protected by locks. In this implementation x64 JIT bypasses stack unwind and jumps into the callee program after prologue. - bpf_prog_array_compatible() ensures that prog_type of callee and caller are the same and JITed/non-JITed flag is the same, since calling JITed program from non-JITed is invalid, since stack frames are different. Similarly calling kprobe type program from socket type program is invalid. - jump table is implemented as BPF_MAP_TYPE_PROG_ARRAY to reuse 'map' abstraction, its user space API and all of verifier logic. It's in the existing arraymap.c file, since several functions are shared with regular array map. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-19 23:59:03 +00:00
}
return array->owner_prog_type == fp->type &&
array->owner_jited == fp->jited;
bpf: allow bpf programs to tail-call other bpf programs introduce bpf_tail_call(ctx, &jmp_table, index) helper function which can be used from BPF programs like: int bpf_prog(struct pt_regs *ctx) { ... bpf_tail_call(ctx, &jmp_table, index); ... } that is roughly equivalent to: int bpf_prog(struct pt_regs *ctx) { ... if (jmp_table[index]) return (*jmp_table[index])(ctx); ... } The important detail that it's not a normal call, but a tail call. The kernel stack is precious, so this helper reuses the current stack frame and jumps into another BPF program without adding extra call frame. It's trivially done in interpreter and a bit trickier in JITs. In case of x64 JIT the bigger part of generated assembler prologue is common for all programs, so it is simply skipped while jumping. Other JITs can do similar prologue-skipping optimization or do stack unwind before jumping into the next program. bpf_tail_call() arguments: ctx - context pointer jmp_table - one of BPF_MAP_TYPE_PROG_ARRAY maps used as the jump table index - index in the jump table Since all BPF programs are idenitified by file descriptor, user space need to populate the jmp_table with FDs of other BPF programs. If jmp_table[index] is empty the bpf_tail_call() doesn't jump anywhere and program execution continues as normal. New BPF_MAP_TYPE_PROG_ARRAY map type is introduced so that user space can populate this jmp_table array with FDs of other bpf programs. Programs can share the same jmp_table array or use multiple jmp_tables. The chain of tail calls can form unpredictable dynamic loops therefore tail_call_cnt is used to limit the number of calls and currently is set to 32. Use cases: Acked-by: Daniel Borkmann <daniel@iogearbox.net> ========== - simplify complex programs by splitting them into a sequence of small programs - dispatch routine For tracing and future seccomp the program may be triggered on all system calls, but processing of syscall arguments will be different. It's more efficient to implement them as: int syscall_entry(struct seccomp_data *ctx) { bpf_tail_call(ctx, &syscall_jmp_table, ctx->nr /* syscall number */); ... default: process unknown syscall ... } int sys_write_event(struct seccomp_data *ctx) {...} int sys_read_event(struct seccomp_data *ctx) {...} syscall_jmp_table[__NR_write] = sys_write_event; syscall_jmp_table[__NR_read] = sys_read_event; For networking the program may call into different parsers depending on packet format, like: int packet_parser(struct __sk_buff *skb) { ... parse L2, L3 here ... __u8 ipproto = load_byte(skb, ... offsetof(struct iphdr, protocol)); bpf_tail_call(skb, &ipproto_jmp_table, ipproto); ... default: process unknown protocol ... } int parse_tcp(struct __sk_buff *skb) {...} int parse_udp(struct __sk_buff *skb) {...} ipproto_jmp_table[IPPROTO_TCP] = parse_tcp; ipproto_jmp_table[IPPROTO_UDP] = parse_udp; - for TC use case, bpf_tail_call() allows to implement reclassify-like logic - bpf_map_update_elem/delete calls into BPF_MAP_TYPE_PROG_ARRAY jump table are atomic, so user space can build chains of BPF programs on the fly Implementation details: ======================= - high performance of bpf_tail_call() is the goal. It could have been implemented without JIT changes as a wrapper on top of BPF_PROG_RUN() macro, but with two downsides: . all programs would have to pay performance penalty for this feature and tail call itself would be slower, since mandatory stack unwind, return, stack allocate would be done for every tailcall. . tailcall would be limited to programs running preempt_disabled, since generic 'void *ctx' doesn't have room for 'tail_call_cnt' and it would need to be either global per_cpu variable accessed by helper and by wrapper or global variable protected by locks. In this implementation x64 JIT bypasses stack unwind and jumps into the callee program after prologue. - bpf_prog_array_compatible() ensures that prog_type of callee and caller are the same and JITed/non-JITed flag is the same, since calling JITed program from non-JITed is invalid, since stack frames are different. Similarly calling kprobe type program from socket type program is invalid. - jump table is implemented as BPF_MAP_TYPE_PROG_ARRAY to reuse 'map' abstraction, its user space API and all of verifier logic. It's in the existing arraymap.c file, since several functions are shared with regular array map. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-19 23:59:03 +00:00
}
static int bpf_check_tail_call(const struct bpf_prog *fp)
bpf: allow bpf programs to tail-call other bpf programs introduce bpf_tail_call(ctx, &jmp_table, index) helper function which can be used from BPF programs like: int bpf_prog(struct pt_regs *ctx) { ... bpf_tail_call(ctx, &jmp_table, index); ... } that is roughly equivalent to: int bpf_prog(struct pt_regs *ctx) { ... if (jmp_table[index]) return (*jmp_table[index])(ctx); ... } The important detail that it's not a normal call, but a tail call. The kernel stack is precious, so this helper reuses the current stack frame and jumps into another BPF program without adding extra call frame. It's trivially done in interpreter and a bit trickier in JITs. In case of x64 JIT the bigger part of generated assembler prologue is common for all programs, so it is simply skipped while jumping. Other JITs can do similar prologue-skipping optimization or do stack unwind before jumping into the next program. bpf_tail_call() arguments: ctx - context pointer jmp_table - one of BPF_MAP_TYPE_PROG_ARRAY maps used as the jump table index - index in the jump table Since all BPF programs are idenitified by file descriptor, user space need to populate the jmp_table with FDs of other BPF programs. If jmp_table[index] is empty the bpf_tail_call() doesn't jump anywhere and program execution continues as normal. New BPF_MAP_TYPE_PROG_ARRAY map type is introduced so that user space can populate this jmp_table array with FDs of other bpf programs. Programs can share the same jmp_table array or use multiple jmp_tables. The chain of tail calls can form unpredictable dynamic loops therefore tail_call_cnt is used to limit the number of calls and currently is set to 32. Use cases: Acked-by: Daniel Borkmann <daniel@iogearbox.net> ========== - simplify complex programs by splitting them into a sequence of small programs - dispatch routine For tracing and future seccomp the program may be triggered on all system calls, but processing of syscall arguments will be different. It's more efficient to implement them as: int syscall_entry(struct seccomp_data *ctx) { bpf_tail_call(ctx, &syscall_jmp_table, ctx->nr /* syscall number */); ... default: process unknown syscall ... } int sys_write_event(struct seccomp_data *ctx) {...} int sys_read_event(struct seccomp_data *ctx) {...} syscall_jmp_table[__NR_write] = sys_write_event; syscall_jmp_table[__NR_read] = sys_read_event; For networking the program may call into different parsers depending on packet format, like: int packet_parser(struct __sk_buff *skb) { ... parse L2, L3 here ... __u8 ipproto = load_byte(skb, ... offsetof(struct iphdr, protocol)); bpf_tail_call(skb, &ipproto_jmp_table, ipproto); ... default: process unknown protocol ... } int parse_tcp(struct __sk_buff *skb) {...} int parse_udp(struct __sk_buff *skb) {...} ipproto_jmp_table[IPPROTO_TCP] = parse_tcp; ipproto_jmp_table[IPPROTO_UDP] = parse_udp; - for TC use case, bpf_tail_call() allows to implement reclassify-like logic - bpf_map_update_elem/delete calls into BPF_MAP_TYPE_PROG_ARRAY jump table are atomic, so user space can build chains of BPF programs on the fly Implementation details: ======================= - high performance of bpf_tail_call() is the goal. It could have been implemented without JIT changes as a wrapper on top of BPF_PROG_RUN() macro, but with two downsides: . all programs would have to pay performance penalty for this feature and tail call itself would be slower, since mandatory stack unwind, return, stack allocate would be done for every tailcall. . tailcall would be limited to programs running preempt_disabled, since generic 'void *ctx' doesn't have room for 'tail_call_cnt' and it would need to be either global per_cpu variable accessed by helper and by wrapper or global variable protected by locks. In this implementation x64 JIT bypasses stack unwind and jumps into the callee program after prologue. - bpf_prog_array_compatible() ensures that prog_type of callee and caller are the same and JITed/non-JITed flag is the same, since calling JITed program from non-JITed is invalid, since stack frames are different. Similarly calling kprobe type program from socket type program is invalid. - jump table is implemented as BPF_MAP_TYPE_PROG_ARRAY to reuse 'map' abstraction, its user space API and all of verifier logic. It's in the existing arraymap.c file, since several functions are shared with regular array map. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-19 23:59:03 +00:00
{
struct bpf_prog_aux *aux = fp->aux;
int i;
for (i = 0; i < aux->used_map_cnt; i++) {
struct bpf_map *map = aux->used_maps[i];
bpf: allow bpf programs to tail-call other bpf programs introduce bpf_tail_call(ctx, &jmp_table, index) helper function which can be used from BPF programs like: int bpf_prog(struct pt_regs *ctx) { ... bpf_tail_call(ctx, &jmp_table, index); ... } that is roughly equivalent to: int bpf_prog(struct pt_regs *ctx) { ... if (jmp_table[index]) return (*jmp_table[index])(ctx); ... } The important detail that it's not a normal call, but a tail call. The kernel stack is precious, so this helper reuses the current stack frame and jumps into another BPF program without adding extra call frame. It's trivially done in interpreter and a bit trickier in JITs. In case of x64 JIT the bigger part of generated assembler prologue is common for all programs, so it is simply skipped while jumping. Other JITs can do similar prologue-skipping optimization or do stack unwind before jumping into the next program. bpf_tail_call() arguments: ctx - context pointer jmp_table - one of BPF_MAP_TYPE_PROG_ARRAY maps used as the jump table index - index in the jump table Since all BPF programs are idenitified by file descriptor, user space need to populate the jmp_table with FDs of other BPF programs. If jmp_table[index] is empty the bpf_tail_call() doesn't jump anywhere and program execution continues as normal. New BPF_MAP_TYPE_PROG_ARRAY map type is introduced so that user space can populate this jmp_table array with FDs of other bpf programs. Programs can share the same jmp_table array or use multiple jmp_tables. The chain of tail calls can form unpredictable dynamic loops therefore tail_call_cnt is used to limit the number of calls and currently is set to 32. Use cases: Acked-by: Daniel Borkmann <daniel@iogearbox.net> ========== - simplify complex programs by splitting them into a sequence of small programs - dispatch routine For tracing and future seccomp the program may be triggered on all system calls, but processing of syscall arguments will be different. It's more efficient to implement them as: int syscall_entry(struct seccomp_data *ctx) { bpf_tail_call(ctx, &syscall_jmp_table, ctx->nr /* syscall number */); ... default: process unknown syscall ... } int sys_write_event(struct seccomp_data *ctx) {...} int sys_read_event(struct seccomp_data *ctx) {...} syscall_jmp_table[__NR_write] = sys_write_event; syscall_jmp_table[__NR_read] = sys_read_event; For networking the program may call into different parsers depending on packet format, like: int packet_parser(struct __sk_buff *skb) { ... parse L2, L3 here ... __u8 ipproto = load_byte(skb, ... offsetof(struct iphdr, protocol)); bpf_tail_call(skb, &ipproto_jmp_table, ipproto); ... default: process unknown protocol ... } int parse_tcp(struct __sk_buff *skb) {...} int parse_udp(struct __sk_buff *skb) {...} ipproto_jmp_table[IPPROTO_TCP] = parse_tcp; ipproto_jmp_table[IPPROTO_UDP] = parse_udp; - for TC use case, bpf_tail_call() allows to implement reclassify-like logic - bpf_map_update_elem/delete calls into BPF_MAP_TYPE_PROG_ARRAY jump table are atomic, so user space can build chains of BPF programs on the fly Implementation details: ======================= - high performance of bpf_tail_call() is the goal. It could have been implemented without JIT changes as a wrapper on top of BPF_PROG_RUN() macro, but with two downsides: . all programs would have to pay performance penalty for this feature and tail call itself would be slower, since mandatory stack unwind, return, stack allocate would be done for every tailcall. . tailcall would be limited to programs running preempt_disabled, since generic 'void *ctx' doesn't have room for 'tail_call_cnt' and it would need to be either global per_cpu variable accessed by helper and by wrapper or global variable protected by locks. In this implementation x64 JIT bypasses stack unwind and jumps into the callee program after prologue. - bpf_prog_array_compatible() ensures that prog_type of callee and caller are the same and JITed/non-JITed flag is the same, since calling JITed program from non-JITed is invalid, since stack frames are different. Similarly calling kprobe type program from socket type program is invalid. - jump table is implemented as BPF_MAP_TYPE_PROG_ARRAY to reuse 'map' abstraction, its user space API and all of verifier logic. It's in the existing arraymap.c file, since several functions are shared with regular array map. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-19 23:59:03 +00:00
struct bpf_array *array;
if (map->map_type != BPF_MAP_TYPE_PROG_ARRAY)
continue;
bpf: allow bpf programs to tail-call other bpf programs introduce bpf_tail_call(ctx, &jmp_table, index) helper function which can be used from BPF programs like: int bpf_prog(struct pt_regs *ctx) { ... bpf_tail_call(ctx, &jmp_table, index); ... } that is roughly equivalent to: int bpf_prog(struct pt_regs *ctx) { ... if (jmp_table[index]) return (*jmp_table[index])(ctx); ... } The important detail that it's not a normal call, but a tail call. The kernel stack is precious, so this helper reuses the current stack frame and jumps into another BPF program without adding extra call frame. It's trivially done in interpreter and a bit trickier in JITs. In case of x64 JIT the bigger part of generated assembler prologue is common for all programs, so it is simply skipped while jumping. Other JITs can do similar prologue-skipping optimization or do stack unwind before jumping into the next program. bpf_tail_call() arguments: ctx - context pointer jmp_table - one of BPF_MAP_TYPE_PROG_ARRAY maps used as the jump table index - index in the jump table Since all BPF programs are idenitified by file descriptor, user space need to populate the jmp_table with FDs of other BPF programs. If jmp_table[index] is empty the bpf_tail_call() doesn't jump anywhere and program execution continues as normal. New BPF_MAP_TYPE_PROG_ARRAY map type is introduced so that user space can populate this jmp_table array with FDs of other bpf programs. Programs can share the same jmp_table array or use multiple jmp_tables. The chain of tail calls can form unpredictable dynamic loops therefore tail_call_cnt is used to limit the number of calls and currently is set to 32. Use cases: Acked-by: Daniel Borkmann <daniel@iogearbox.net> ========== - simplify complex programs by splitting them into a sequence of small programs - dispatch routine For tracing and future seccomp the program may be triggered on all system calls, but processing of syscall arguments will be different. It's more efficient to implement them as: int syscall_entry(struct seccomp_data *ctx) { bpf_tail_call(ctx, &syscall_jmp_table, ctx->nr /* syscall number */); ... default: process unknown syscall ... } int sys_write_event(struct seccomp_data *ctx) {...} int sys_read_event(struct seccomp_data *ctx) {...} syscall_jmp_table[__NR_write] = sys_write_event; syscall_jmp_table[__NR_read] = sys_read_event; For networking the program may call into different parsers depending on packet format, like: int packet_parser(struct __sk_buff *skb) { ... parse L2, L3 here ... __u8 ipproto = load_byte(skb, ... offsetof(struct iphdr, protocol)); bpf_tail_call(skb, &ipproto_jmp_table, ipproto); ... default: process unknown protocol ... } int parse_tcp(struct __sk_buff *skb) {...} int parse_udp(struct __sk_buff *skb) {...} ipproto_jmp_table[IPPROTO_TCP] = parse_tcp; ipproto_jmp_table[IPPROTO_UDP] = parse_udp; - for TC use case, bpf_tail_call() allows to implement reclassify-like logic - bpf_map_update_elem/delete calls into BPF_MAP_TYPE_PROG_ARRAY jump table are atomic, so user space can build chains of BPF programs on the fly Implementation details: ======================= - high performance of bpf_tail_call() is the goal. It could have been implemented without JIT changes as a wrapper on top of BPF_PROG_RUN() macro, but with two downsides: . all programs would have to pay performance penalty for this feature and tail call itself would be slower, since mandatory stack unwind, return, stack allocate would be done for every tailcall. . tailcall would be limited to programs running preempt_disabled, since generic 'void *ctx' doesn't have room for 'tail_call_cnt' and it would need to be either global per_cpu variable accessed by helper and by wrapper or global variable protected by locks. In this implementation x64 JIT bypasses stack unwind and jumps into the callee program after prologue. - bpf_prog_array_compatible() ensures that prog_type of callee and caller are the same and JITed/non-JITed flag is the same, since calling JITed program from non-JITed is invalid, since stack frames are different. Similarly calling kprobe type program from socket type program is invalid. - jump table is implemented as BPF_MAP_TYPE_PROG_ARRAY to reuse 'map' abstraction, its user space API and all of verifier logic. It's in the existing arraymap.c file, since several functions are shared with regular array map. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-19 23:59:03 +00:00
array = container_of(map, struct bpf_array, map);
if (!bpf_prog_array_compatible(array, fp))
return -EINVAL;
}
return 0;
}
/**
* bpf_prog_select_runtime - select exec runtime for BPF program
net: filter: split 'struct sk_filter' into socket and bpf parts clean up names related to socket filtering and bpf in the following way: - everything that deals with sockets keeps 'sk_*' prefix - everything that is pure BPF is changed to 'bpf_*' prefix split 'struct sk_filter' into struct sk_filter { atomic_t refcnt; struct rcu_head rcu; struct bpf_prog *prog; }; and struct bpf_prog { u32 jited:1, len:31; struct sock_fprog_kern *orig_prog; unsigned int (*bpf_func)(const struct sk_buff *skb, const struct bpf_insn *filter); union { struct sock_filter insns[0]; struct bpf_insn insnsi[0]; struct work_struct work; }; }; so that 'struct bpf_prog' can be used independent of sockets and cleans up 'unattached' bpf use cases split SK_RUN_FILTER macro into: SK_RUN_FILTER to be used with 'struct sk_filter *' and BPF_PROG_RUN to be used with 'struct bpf_prog *' __sk_filter_release(struct sk_filter *) gains __bpf_prog_release(struct bpf_prog *) helper function also perform related renames for the functions that work with 'struct bpf_prog *', since they're on the same lines: sk_filter_size -> bpf_prog_size sk_filter_select_runtime -> bpf_prog_select_runtime sk_filter_free -> bpf_prog_free sk_unattached_filter_create -> bpf_prog_create sk_unattached_filter_destroy -> bpf_prog_destroy sk_store_orig_filter -> bpf_prog_store_orig_filter sk_release_orig_filter -> bpf_release_orig_filter __sk_migrate_filter -> bpf_migrate_filter __sk_prepare_filter -> bpf_prepare_filter API for attaching classic BPF to a socket stays the same: sk_attach_filter(prog, struct sock *)/sk_detach_filter(struct sock *) and SK_RUN_FILTER(struct sk_filter *, ctx) to execute a program which is used by sockets, tun, af_packet API for 'unattached' BPF programs becomes: bpf_prog_create(struct bpf_prog **)/bpf_prog_destroy(struct bpf_prog *) and BPF_PROG_RUN(struct bpf_prog *, ctx) to execute a program which is used by isdn, ppp, team, seccomp, ptp, xt_bpf, cls_bpf, test_bpf Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-31 03:34:16 +00:00
* @fp: bpf_prog populated with internal BPF program
* @err: pointer to error variable
*
* Try to JIT eBPF program, if JIT is not available, use interpreter.
* The BPF program will be executed via BPF_PROG_RUN() macro.
*/
struct bpf_prog *bpf_prog_select_runtime(struct bpf_prog *fp, int *err)
{
bpf: introduce BPF_JIT_ALWAYS_ON config The BPF interpreter has been used as part of the spectre 2 attack CVE-2017-5715. A quote from goolge project zero blog: "At this point, it would normally be necessary to locate gadgets in the host kernel code that can be used to actually leak data by reading from an attacker-controlled location, shifting and masking the result appropriately and then using the result of that as offset to an attacker-controlled address for a load. But piecing gadgets together and figuring out which ones work in a speculation context seems annoying. So instead, we decided to use the eBPF interpreter, which is built into the host kernel - while there is no legitimate way to invoke it from inside a VM, the presence of the code in the host kernel's text section is sufficient to make it usable for the attack, just like with ordinary ROP gadgets." To make attacker job harder introduce BPF_JIT_ALWAYS_ON config option that removes interpreter from the kernel in favor of JIT-only mode. So far eBPF JIT is supported by: x64, arm64, arm32, sparc64, s390, powerpc64, mips64 The start of JITed program is randomized and code page is marked as read-only. In addition "constant blinding" can be turned on with net.core.bpf_jit_harden v2->v3: - move __bpf_prog_ret0 under ifdef (Daniel) v1->v2: - fix init order, test_bpf and cBPF (Daniel's feedback) - fix offloaded bpf (Jakub's feedback) - add 'return 0' dummy in case something can invoke prog->bpf_func - retarget bpf tree. For bpf-next the patch would need one extra hunk. It will be sent when the trees are merged back to net-next Considered doing: int bpf_jit_enable __read_mostly = BPF_EBPF_JIT_DEFAULT; but it seems better to land the patch as-is and in bpf-next remove bpf_jit_enable global variable from all JITs, consolidate in one place and remove this jit_init() function. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-01-09 18:04:29 +00:00
#ifndef CONFIG_BPF_JIT_ALWAYS_ON
bpf: Fix out-of-bound access on interpreters[] The index is off-by-one when fp->aux->stack_depth has already been rounded up to 32. In particular, if stack_depth is 512, the index will be 16. The fix is to round_up and then takes -1 instead of round_down. [ 22.318680] ================================================================== [ 22.319745] BUG: KASAN: global-out-of-bounds in bpf_prog_select_runtime+0x48a/0x670 [ 22.320737] Read of size 8 at addr ffffffff82aadae0 by task sockex3/1946 [ 22.321646] [ 22.321858] CPU: 1 PID: 1946 Comm: sockex3 Tainted: G W 4.12.0-rc6-01680-g2ee87db3a287 #22 [ 22.323061] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.9.3-1.el7.centos 04/01/2014 [ 22.324260] Call Trace: [ 22.324612] dump_stack+0x67/0x99 [ 22.325081] print_address_description+0x1e8/0x290 [ 22.325734] ? bpf_prog_select_runtime+0x48a/0x670 [ 22.326360] kasan_report+0x265/0x350 [ 22.326860] __asan_report_load8_noabort+0x19/0x20 [ 22.327484] bpf_prog_select_runtime+0x48a/0x670 [ 22.328109] bpf_prog_load+0x626/0xd40 [ 22.328637] ? __bpf_prog_charge+0xc0/0xc0 [ 22.329222] ? check_nnp_nosuid.isra.61+0x100/0x100 [ 22.329890] ? __might_fault+0xf6/0x1b0 [ 22.330446] ? lock_acquire+0x360/0x360 [ 22.331013] SyS_bpf+0x67c/0x24d0 [ 22.331491] ? trace_hardirqs_on+0xd/0x10 [ 22.332049] ? __getnstimeofday64+0xaf/0x1c0 [ 22.332635] ? bpf_prog_get+0x20/0x20 [ 22.333135] ? __audit_syscall_entry+0x300/0x600 [ 22.333770] ? syscall_trace_enter+0x540/0xdd0 [ 22.334339] ? exit_to_usermode_loop+0xe0/0xe0 [ 22.334950] ? do_syscall_64+0x48/0x410 [ 22.335446] ? bpf_prog_get+0x20/0x20 [ 22.335954] do_syscall_64+0x181/0x410 [ 22.336454] entry_SYSCALL64_slow_path+0x25/0x25 [ 22.337121] RIP: 0033:0x7f263fe81f19 [ 22.337618] RSP: 002b:00007ffd9a3440c8 EFLAGS: 00000202 ORIG_RAX: 0000000000000141 [ 22.338619] RAX: ffffffffffffffda RBX: 0000000000aac5fb RCX: 00007f263fe81f19 [ 22.339600] RDX: 0000000000000030 RSI: 00007ffd9a3440d0 RDI: 0000000000000005 [ 22.340470] RBP: 0000000000a9a1e0 R08: 0000000000a9a1e0 R09: 0000009d00000001 [ 22.341430] R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000010000 [ 22.342411] R13: 0000000000a9a023 R14: 0000000000000001 R15: 0000000000000003 [ 22.343369] [ 22.343593] The buggy address belongs to the variable: [ 22.344241] interpreters+0x80/0x980 [ 22.344708] [ 22.344908] Memory state around the buggy address: [ 22.345556] ffffffff82aad980: 00 00 00 04 fa fa fa fa 04 fa fa fa fa fa fa fa [ 22.346449] ffffffff82aada00: 00 00 00 00 00 fa fa fa fa fa fa fa 00 00 00 00 [ 22.347361] >ffffffff82aada80: 00 00 00 00 00 00 00 00 00 00 00 00 fa fa fa fa [ 22.348301] ^ [ 22.349142] ffffffff82aadb00: 00 01 fa fa fa fa fa fa 00 00 00 00 00 00 00 00 [ 22.350058] ffffffff82aadb80: 00 00 07 fa fa fa fa fa 00 00 05 fa fa fa fa fa [ 22.350984] ================================================================== Fixes: b870aa901f4b ("bpf: use different interpreter depending on required stack size") Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Alexei Starovoitov <ast@fb.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-28 17:41:24 +00:00
u32 stack_depth = max_t(u32, fp->aux->stack_depth, 1);
fp->bpf_func = interpreters[(round_up(stack_depth, 32) / 32) - 1];
bpf: introduce BPF_JIT_ALWAYS_ON config The BPF interpreter has been used as part of the spectre 2 attack CVE-2017-5715. A quote from goolge project zero blog: "At this point, it would normally be necessary to locate gadgets in the host kernel code that can be used to actually leak data by reading from an attacker-controlled location, shifting and masking the result appropriately and then using the result of that as offset to an attacker-controlled address for a load. But piecing gadgets together and figuring out which ones work in a speculation context seems annoying. So instead, we decided to use the eBPF interpreter, which is built into the host kernel - while there is no legitimate way to invoke it from inside a VM, the presence of the code in the host kernel's text section is sufficient to make it usable for the attack, just like with ordinary ROP gadgets." To make attacker job harder introduce BPF_JIT_ALWAYS_ON config option that removes interpreter from the kernel in favor of JIT-only mode. So far eBPF JIT is supported by: x64, arm64, arm32, sparc64, s390, powerpc64, mips64 The start of JITed program is randomized and code page is marked as read-only. In addition "constant blinding" can be turned on with net.core.bpf_jit_harden v2->v3: - move __bpf_prog_ret0 under ifdef (Daniel) v1->v2: - fix init order, test_bpf and cBPF (Daniel's feedback) - fix offloaded bpf (Jakub's feedback) - add 'return 0' dummy in case something can invoke prog->bpf_func - retarget bpf tree. For bpf-next the patch would need one extra hunk. It will be sent when the trees are merged back to net-next Considered doing: int bpf_jit_enable __read_mostly = BPF_EBPF_JIT_DEFAULT; but it seems better to land the patch as-is and in bpf-next remove bpf_jit_enable global variable from all JITs, consolidate in one place and remove this jit_init() function. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-01-09 18:04:29 +00:00
#else
fp->bpf_func = __bpf_prog_ret0;
#endif
/* eBPF JITs can rewrite the program in case constant
* blinding is active. However, in case of error during
* blinding, bpf_int_jit_compile() must always return a
* valid program, which in this case would simply not
* be JITed, but falls back to the interpreter.
*/
if (!bpf_prog_is_dev_bound(fp->aux)) {
fp = bpf_int_jit_compile(fp);
bpf: introduce BPF_JIT_ALWAYS_ON config The BPF interpreter has been used as part of the spectre 2 attack CVE-2017-5715. A quote from goolge project zero blog: "At this point, it would normally be necessary to locate gadgets in the host kernel code that can be used to actually leak data by reading from an attacker-controlled location, shifting and masking the result appropriately and then using the result of that as offset to an attacker-controlled address for a load. But piecing gadgets together and figuring out which ones work in a speculation context seems annoying. So instead, we decided to use the eBPF interpreter, which is built into the host kernel - while there is no legitimate way to invoke it from inside a VM, the presence of the code in the host kernel's text section is sufficient to make it usable for the attack, just like with ordinary ROP gadgets." To make attacker job harder introduce BPF_JIT_ALWAYS_ON config option that removes interpreter from the kernel in favor of JIT-only mode. So far eBPF JIT is supported by: x64, arm64, arm32, sparc64, s390, powerpc64, mips64 The start of JITed program is randomized and code page is marked as read-only. In addition "constant blinding" can be turned on with net.core.bpf_jit_harden v2->v3: - move __bpf_prog_ret0 under ifdef (Daniel) v1->v2: - fix init order, test_bpf and cBPF (Daniel's feedback) - fix offloaded bpf (Jakub's feedback) - add 'return 0' dummy in case something can invoke prog->bpf_func - retarget bpf tree. For bpf-next the patch would need one extra hunk. It will be sent when the trees are merged back to net-next Considered doing: int bpf_jit_enable __read_mostly = BPF_EBPF_JIT_DEFAULT; but it seems better to land the patch as-is and in bpf-next remove bpf_jit_enable global variable from all JITs, consolidate in one place and remove this jit_init() function. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-01-09 18:04:29 +00:00
#ifdef CONFIG_BPF_JIT_ALWAYS_ON
if (!fp->jited) {
*err = -ENOTSUPP;
return fp;
}
#endif
} else {
*err = bpf_prog_offload_compile(fp);
if (*err)
return fp;
}
net: bpf: make eBPF interpreter images read-only With eBPF getting more extended and exposure to user space is on it's way, hardening the memory range the interpreter uses to steer its command flow seems appropriate. This patch moves the to be interpreted bytecode to read-only pages. In case we execute a corrupted BPF interpreter image for some reason e.g. caused by an attacker which got past a verifier stage, it would not only provide arbitrary read/write memory access but arbitrary function calls as well. After setting up the BPF interpreter image, its contents do not change until destruction time, thus we can setup the image on immutable made pages in order to mitigate modifications to that code. The idea is derived from commit 314beb9bcabf ("x86: bpf_jit_comp: secure bpf jit against spraying attacks"). This is possible because bpf_prog is not part of sk_filter anymore. After setup bpf_prog cannot be altered during its life-time. This prevents any modifications to the entire bpf_prog structure (incl. function/JIT image pointer). Every eBPF program (including classic BPF that are migrated) have to call bpf_prog_select_runtime() to select either interpreter or a JIT image as a last setup step, and they all are being freed via bpf_prog_free(), including non-JIT. Therefore, we can easily integrate this into the eBPF life-time, plus since we directly allocate a bpf_prog, we have no performance penalty. Tested with seccomp and test_bpf testsuite in JIT/non-JIT mode and manual inspection of kernel_page_tables. Brad Spengler proposed the same idea via Twitter during development of this patch. Joint work with Hannes Frederic Sowa. Suggested-by: Brad Spengler <spender@grsecurity.net> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Kees Cook <keescook@chromium.org> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-02 20:53:44 +00:00
bpf_prog_lock_ro(fp);
bpf: allow bpf programs to tail-call other bpf programs introduce bpf_tail_call(ctx, &jmp_table, index) helper function which can be used from BPF programs like: int bpf_prog(struct pt_regs *ctx) { ... bpf_tail_call(ctx, &jmp_table, index); ... } that is roughly equivalent to: int bpf_prog(struct pt_regs *ctx) { ... if (jmp_table[index]) return (*jmp_table[index])(ctx); ... } The important detail that it's not a normal call, but a tail call. The kernel stack is precious, so this helper reuses the current stack frame and jumps into another BPF program without adding extra call frame. It's trivially done in interpreter and a bit trickier in JITs. In case of x64 JIT the bigger part of generated assembler prologue is common for all programs, so it is simply skipped while jumping. Other JITs can do similar prologue-skipping optimization or do stack unwind before jumping into the next program. bpf_tail_call() arguments: ctx - context pointer jmp_table - one of BPF_MAP_TYPE_PROG_ARRAY maps used as the jump table index - index in the jump table Since all BPF programs are idenitified by file descriptor, user space need to populate the jmp_table with FDs of other BPF programs. If jmp_table[index] is empty the bpf_tail_call() doesn't jump anywhere and program execution continues as normal. New BPF_MAP_TYPE_PROG_ARRAY map type is introduced so that user space can populate this jmp_table array with FDs of other bpf programs. Programs can share the same jmp_table array or use multiple jmp_tables. The chain of tail calls can form unpredictable dynamic loops therefore tail_call_cnt is used to limit the number of calls and currently is set to 32. Use cases: Acked-by: Daniel Borkmann <daniel@iogearbox.net> ========== - simplify complex programs by splitting them into a sequence of small programs - dispatch routine For tracing and future seccomp the program may be triggered on all system calls, but processing of syscall arguments will be different. It's more efficient to implement them as: int syscall_entry(struct seccomp_data *ctx) { bpf_tail_call(ctx, &syscall_jmp_table, ctx->nr /* syscall number */); ... default: process unknown syscall ... } int sys_write_event(struct seccomp_data *ctx) {...} int sys_read_event(struct seccomp_data *ctx) {...} syscall_jmp_table[__NR_write] = sys_write_event; syscall_jmp_table[__NR_read] = sys_read_event; For networking the program may call into different parsers depending on packet format, like: int packet_parser(struct __sk_buff *skb) { ... parse L2, L3 here ... __u8 ipproto = load_byte(skb, ... offsetof(struct iphdr, protocol)); bpf_tail_call(skb, &ipproto_jmp_table, ipproto); ... default: process unknown protocol ... } int parse_tcp(struct __sk_buff *skb) {...} int parse_udp(struct __sk_buff *skb) {...} ipproto_jmp_table[IPPROTO_TCP] = parse_tcp; ipproto_jmp_table[IPPROTO_UDP] = parse_udp; - for TC use case, bpf_tail_call() allows to implement reclassify-like logic - bpf_map_update_elem/delete calls into BPF_MAP_TYPE_PROG_ARRAY jump table are atomic, so user space can build chains of BPF programs on the fly Implementation details: ======================= - high performance of bpf_tail_call() is the goal. It could have been implemented without JIT changes as a wrapper on top of BPF_PROG_RUN() macro, but with two downsides: . all programs would have to pay performance penalty for this feature and tail call itself would be slower, since mandatory stack unwind, return, stack allocate would be done for every tailcall. . tailcall would be limited to programs running preempt_disabled, since generic 'void *ctx' doesn't have room for 'tail_call_cnt' and it would need to be either global per_cpu variable accessed by helper and by wrapper or global variable protected by locks. In this implementation x64 JIT bypasses stack unwind and jumps into the callee program after prologue. - bpf_prog_array_compatible() ensures that prog_type of callee and caller are the same and JITed/non-JITed flag is the same, since calling JITed program from non-JITed is invalid, since stack frames are different. Similarly calling kprobe type program from socket type program is invalid. - jump table is implemented as BPF_MAP_TYPE_PROG_ARRAY to reuse 'map' abstraction, its user space API and all of verifier logic. It's in the existing arraymap.c file, since several functions are shared with regular array map. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-19 23:59:03 +00:00
/* The tail call compatibility check can only be done at
* this late stage as we need to determine, if we deal
* with JITed or non JITed program concatenations and not
* all eBPF JITs might immediately support all features.
*/
*err = bpf_check_tail_call(fp);
return fp;
}
net: filter: split 'struct sk_filter' into socket and bpf parts clean up names related to socket filtering and bpf in the following way: - everything that deals with sockets keeps 'sk_*' prefix - everything that is pure BPF is changed to 'bpf_*' prefix split 'struct sk_filter' into struct sk_filter { atomic_t refcnt; struct rcu_head rcu; struct bpf_prog *prog; }; and struct bpf_prog { u32 jited:1, len:31; struct sock_fprog_kern *orig_prog; unsigned int (*bpf_func)(const struct sk_buff *skb, const struct bpf_insn *filter); union { struct sock_filter insns[0]; struct bpf_insn insnsi[0]; struct work_struct work; }; }; so that 'struct bpf_prog' can be used independent of sockets and cleans up 'unattached' bpf use cases split SK_RUN_FILTER macro into: SK_RUN_FILTER to be used with 'struct sk_filter *' and BPF_PROG_RUN to be used with 'struct bpf_prog *' __sk_filter_release(struct sk_filter *) gains __bpf_prog_release(struct bpf_prog *) helper function also perform related renames for the functions that work with 'struct bpf_prog *', since they're on the same lines: sk_filter_size -> bpf_prog_size sk_filter_select_runtime -> bpf_prog_select_runtime sk_filter_free -> bpf_prog_free sk_unattached_filter_create -> bpf_prog_create sk_unattached_filter_destroy -> bpf_prog_destroy sk_store_orig_filter -> bpf_prog_store_orig_filter sk_release_orig_filter -> bpf_release_orig_filter __sk_migrate_filter -> bpf_migrate_filter __sk_prepare_filter -> bpf_prepare_filter API for attaching classic BPF to a socket stays the same: sk_attach_filter(prog, struct sock *)/sk_detach_filter(struct sock *) and SK_RUN_FILTER(struct sk_filter *, ctx) to execute a program which is used by sockets, tun, af_packet API for 'unattached' BPF programs becomes: bpf_prog_create(struct bpf_prog **)/bpf_prog_destroy(struct bpf_prog *) and BPF_PROG_RUN(struct bpf_prog *, ctx) to execute a program which is used by isdn, ppp, team, seccomp, ptp, xt_bpf, cls_bpf, test_bpf Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-31 03:34:16 +00:00
EXPORT_SYMBOL_GPL(bpf_prog_select_runtime);
static unsigned int __bpf_prog_ret1(const void *ctx,
const struct bpf_insn *insn)
{
return 1;
}
static struct bpf_prog_dummy {
struct bpf_prog prog;
} dummy_bpf_prog = {
.prog = {
.bpf_func = __bpf_prog_ret1,
},
};
bpf: multi program support for cgroup+bpf introduce BPF_F_ALLOW_MULTI flag that can be used to attach multiple bpf programs to a cgroup. The difference between three possible flags for BPF_PROG_ATTACH command: - NONE(default): No further bpf programs allowed in the subtree. - BPF_F_ALLOW_OVERRIDE: If a sub-cgroup installs some bpf program, the program in this cgroup yields to sub-cgroup program. - BPF_F_ALLOW_MULTI: If a sub-cgroup installs some bpf program, that cgroup program gets run in addition to the program in this cgroup. NONE and BPF_F_ALLOW_OVERRIDE existed before. This patch doesn't change their behavior. It only clarifies the semantics in relation to new flag. Only one program is allowed to be attached to a cgroup with NONE or BPF_F_ALLOW_OVERRIDE flag. Multiple programs are allowed to be attached to a cgroup with BPF_F_ALLOW_MULTI flag. They are executed in FIFO order (those that were attached first, run first) The programs of sub-cgroup are executed first, then programs of this cgroup and then programs of parent cgroup. All eligible programs are executed regardless of return code from earlier programs. To allow efficient execution of multiple programs attached to a cgroup and to avoid penalizing cgroups without any programs attached introduce 'struct bpf_prog_array' which is RCU protected array of pointers to bpf programs. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> for cgroup bits Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03 05:50:21 +00:00
/* to avoid allocating empty bpf_prog_array for cgroups that
* don't have bpf program attached use one global 'empty_prog_array'
* It will not be modified the caller of bpf_prog_array_alloc()
* (since caller requested prog_cnt == 0)
* that pointer should be 'freed' by bpf_prog_array_free()
*/
static struct {
struct bpf_prog_array hdr;
struct bpf_prog *null_prog;
} empty_prog_array = {
.null_prog = NULL,
};
struct bpf_prog_array __rcu *bpf_prog_array_alloc(u32 prog_cnt, gfp_t flags)
{
if (prog_cnt)
return kzalloc(sizeof(struct bpf_prog_array) +
sizeof(struct bpf_prog *) * (prog_cnt + 1),
flags);
return &empty_prog_array.hdr;
}
void bpf_prog_array_free(struct bpf_prog_array __rcu *progs)
{
if (!progs ||
progs == (struct bpf_prog_array __rcu *)&empty_prog_array.hdr)
return;
kfree_rcu(progs, rcu);
}
int bpf_prog_array_length(struct bpf_prog_array __rcu *progs)
{
struct bpf_prog **prog;
u32 cnt = 0;
rcu_read_lock();
prog = rcu_dereference(progs)->progs;
for (; *prog; prog++)
if (*prog != &dummy_bpf_prog.prog)
cnt++;
rcu_read_unlock();
return cnt;
}
int bpf_prog_array_copy_to_user(struct bpf_prog_array __rcu *progs,
__u32 __user *prog_ids, u32 cnt)
{
struct bpf_prog **prog;
u32 i = 0, id;
rcu_read_lock();
prog = rcu_dereference(progs)->progs;
for (; *prog; prog++) {
bpf/tracing: allow user space to query prog array on the same tp Commit e87c6bc3852b ("bpf: permit multiple bpf attachments for a single perf event") added support to attach multiple bpf programs to a single perf event. Although this provides flexibility, users may want to know what other bpf programs attached to the same tp interface. Besides getting visibility for the underlying bpf system, such information may also help consolidate multiple bpf programs, understand potential performance issues due to a large array, and debug (e.g., one bpf program which overwrites return code may impact subsequent program results). Commit 2541517c32be ("tracing, perf: Implement BPF programs attached to kprobes") utilized the existing perf ioctl interface and added the command PERF_EVENT_IOC_SET_BPF to attach a bpf program to a tracepoint. This patch adds a new ioctl command, given a perf event fd, to query the bpf program array attached to the same perf tracepoint event. The new uapi ioctl command: PERF_EVENT_IOC_QUERY_BPF The new uapi/linux/perf_event.h structure: struct perf_event_query_bpf { __u32 ids_len; __u32 prog_cnt; __u32 ids[0]; }; User space provides buffer "ids" for kernel to copy to. When returning from the kernel, the number of available programs in the array is set in "prog_cnt". The usage: struct perf_event_query_bpf *query = malloc(sizeof(*query) + sizeof(u32) * ids_len); query.ids_len = ids_len; err = ioctl(pmu_efd, PERF_EVENT_IOC_QUERY_BPF, query); if (err == 0) { /* query.prog_cnt is the number of available progs, * number of progs in ids: (ids_len == 0) ? 0 : query.prog_cnt */ } else if (errno == ENOSPC) { /* query.ids_len number of progs copied, * query.prog_cnt is the number of available progs */ } else { /* other errors */ } Signed-off-by: Yonghong Song <yhs@fb.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2017-12-11 19:39:02 +00:00
if (*prog == &dummy_bpf_prog.prog)
continue;
id = (*prog)->aux->id;
if (copy_to_user(prog_ids + i, &id, sizeof(id))) {
rcu_read_unlock();
return -EFAULT;
}
if (++i == cnt) {
prog++;
break;
}
}
rcu_read_unlock();
if (*prog)
return -ENOSPC;
return 0;
}
void bpf_prog_array_delete_safe(struct bpf_prog_array __rcu *progs,
struct bpf_prog *old_prog)
{
struct bpf_prog **prog = progs->progs;
for (; *prog; prog++)
if (*prog == old_prog) {
WRITE_ONCE(*prog, &dummy_bpf_prog.prog);
break;
}
}
int bpf_prog_array_copy(struct bpf_prog_array __rcu *old_array,
struct bpf_prog *exclude_prog,
struct bpf_prog *include_prog,
struct bpf_prog_array **new_array)
{
int new_prog_cnt, carry_prog_cnt = 0;
struct bpf_prog **existing_prog;
struct bpf_prog_array *array;
int new_prog_idx = 0;
/* Figure out how many existing progs we need to carry over to
* the new array.
*/
if (old_array) {
existing_prog = old_array->progs;
for (; *existing_prog; existing_prog++) {
if (*existing_prog != exclude_prog &&
*existing_prog != &dummy_bpf_prog.prog)
carry_prog_cnt++;
if (*existing_prog == include_prog)
return -EEXIST;
}
}
/* How many progs (not NULL) will be in the new array? */
new_prog_cnt = carry_prog_cnt;
if (include_prog)
new_prog_cnt += 1;
/* Do we have any prog (not NULL) in the new array? */
if (!new_prog_cnt) {
*new_array = NULL;
return 0;
}
/* +1 as the end of prog_array is marked with NULL */
array = bpf_prog_array_alloc(new_prog_cnt + 1, GFP_KERNEL);
if (!array)
return -ENOMEM;
/* Fill in the new prog array */
if (carry_prog_cnt) {
existing_prog = old_array->progs;
for (; *existing_prog; existing_prog++)
if (*existing_prog != exclude_prog &&
*existing_prog != &dummy_bpf_prog.prog)
array->progs[new_prog_idx++] = *existing_prog;
}
if (include_prog)
array->progs[new_prog_idx++] = include_prog;
array->progs[new_prog_idx] = NULL;
*new_array = array;
return 0;
}
bpf/tracing: allow user space to query prog array on the same tp Commit e87c6bc3852b ("bpf: permit multiple bpf attachments for a single perf event") added support to attach multiple bpf programs to a single perf event. Although this provides flexibility, users may want to know what other bpf programs attached to the same tp interface. Besides getting visibility for the underlying bpf system, such information may also help consolidate multiple bpf programs, understand potential performance issues due to a large array, and debug (e.g., one bpf program which overwrites return code may impact subsequent program results). Commit 2541517c32be ("tracing, perf: Implement BPF programs attached to kprobes") utilized the existing perf ioctl interface and added the command PERF_EVENT_IOC_SET_BPF to attach a bpf program to a tracepoint. This patch adds a new ioctl command, given a perf event fd, to query the bpf program array attached to the same perf tracepoint event. The new uapi ioctl command: PERF_EVENT_IOC_QUERY_BPF The new uapi/linux/perf_event.h structure: struct perf_event_query_bpf { __u32 ids_len; __u32 prog_cnt; __u32 ids[0]; }; User space provides buffer "ids" for kernel to copy to. When returning from the kernel, the number of available programs in the array is set in "prog_cnt". The usage: struct perf_event_query_bpf *query = malloc(sizeof(*query) + sizeof(u32) * ids_len); query.ids_len = ids_len; err = ioctl(pmu_efd, PERF_EVENT_IOC_QUERY_BPF, query); if (err == 0) { /* query.prog_cnt is the number of available progs, * number of progs in ids: (ids_len == 0) ? 0 : query.prog_cnt */ } else if (errno == ENOSPC) { /* query.ids_len number of progs copied, * query.prog_cnt is the number of available progs */ } else { /* other errors */ } Signed-off-by: Yonghong Song <yhs@fb.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2017-12-11 19:39:02 +00:00
int bpf_prog_array_copy_info(struct bpf_prog_array __rcu *array,
__u32 __user *prog_ids, u32 request_cnt,
__u32 __user *prog_cnt)
{
u32 cnt = 0;
if (array)
cnt = bpf_prog_array_length(array);
if (copy_to_user(prog_cnt, &cnt, sizeof(cnt)))
return -EFAULT;
/* return early if user requested only program count or nothing to copy */
if (!request_cnt || !cnt)
return 0;
return bpf_prog_array_copy_to_user(array, prog_ids, request_cnt);
}
net: bpf: make eBPF interpreter images read-only With eBPF getting more extended and exposure to user space is on it's way, hardening the memory range the interpreter uses to steer its command flow seems appropriate. This patch moves the to be interpreted bytecode to read-only pages. In case we execute a corrupted BPF interpreter image for some reason e.g. caused by an attacker which got past a verifier stage, it would not only provide arbitrary read/write memory access but arbitrary function calls as well. After setting up the BPF interpreter image, its contents do not change until destruction time, thus we can setup the image on immutable made pages in order to mitigate modifications to that code. The idea is derived from commit 314beb9bcabf ("x86: bpf_jit_comp: secure bpf jit against spraying attacks"). This is possible because bpf_prog is not part of sk_filter anymore. After setup bpf_prog cannot be altered during its life-time. This prevents any modifications to the entire bpf_prog structure (incl. function/JIT image pointer). Every eBPF program (including classic BPF that are migrated) have to call bpf_prog_select_runtime() to select either interpreter or a JIT image as a last setup step, and they all are being freed via bpf_prog_free(), including non-JIT. Therefore, we can easily integrate this into the eBPF life-time, plus since we directly allocate a bpf_prog, we have no performance penalty. Tested with seccomp and test_bpf testsuite in JIT/non-JIT mode and manual inspection of kernel_page_tables. Brad Spengler proposed the same idea via Twitter during development of this patch. Joint work with Hannes Frederic Sowa. Suggested-by: Brad Spengler <spender@grsecurity.net> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Kees Cook <keescook@chromium.org> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-02 20:53:44 +00:00
static void bpf_prog_free_deferred(struct work_struct *work)
{
struct bpf_prog_aux *aux;
bpf: x64: add JIT support for multi-function programs Typical JIT does several passes over bpf instructions to compute total size and relative offsets of jumps and calls. With multitple bpf functions calling each other all relative calls will have invalid offsets intially therefore we need to additional last pass over the program to emit calls with correct offsets. For example in case of three bpf functions: main: call foo call bpf_map_lookup exit foo: call bar exit bar: exit We will call bpf_int_jit_compile() indepedently for main(), foo() and bar() x64 JIT typically does 4-5 passes to converge. After these initial passes the image for these 3 functions will be good except call targets, since start addresses of foo() and bar() are unknown when we were JITing main() (note that call bpf_map_lookup will be resolved properly during initial passes). Once start addresses of 3 functions are known we patch call_insn->imm to point to right functions and call bpf_int_jit_compile() again which needs only one pass. Additional safety checks are done to make sure this last pass doesn't produce image that is larger or smaller than previous pass. When constant blinding is on it's applied to all functions at the first pass, since doing it once again at the last pass can change size of the JITed code. Tested on x64 and arm64 hw with JIT on/off, blinding on/off. x64 jits bpf-to-bpf calls correctly while arm64 falls back to interpreter. All other JITs that support normal BPF_CALL will behave the same way since bpf-to-bpf call is equivalent to bpf-to-kernel call from JITs point of view. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:15 +00:00
int i;
net: bpf: make eBPF interpreter images read-only With eBPF getting more extended and exposure to user space is on it's way, hardening the memory range the interpreter uses to steer its command flow seems appropriate. This patch moves the to be interpreted bytecode to read-only pages. In case we execute a corrupted BPF interpreter image for some reason e.g. caused by an attacker which got past a verifier stage, it would not only provide arbitrary read/write memory access but arbitrary function calls as well. After setting up the BPF interpreter image, its contents do not change until destruction time, thus we can setup the image on immutable made pages in order to mitigate modifications to that code. The idea is derived from commit 314beb9bcabf ("x86: bpf_jit_comp: secure bpf jit against spraying attacks"). This is possible because bpf_prog is not part of sk_filter anymore. After setup bpf_prog cannot be altered during its life-time. This prevents any modifications to the entire bpf_prog structure (incl. function/JIT image pointer). Every eBPF program (including classic BPF that are migrated) have to call bpf_prog_select_runtime() to select either interpreter or a JIT image as a last setup step, and they all are being freed via bpf_prog_free(), including non-JIT. Therefore, we can easily integrate this into the eBPF life-time, plus since we directly allocate a bpf_prog, we have no performance penalty. Tested with seccomp and test_bpf testsuite in JIT/non-JIT mode and manual inspection of kernel_page_tables. Brad Spengler proposed the same idea via Twitter during development of this patch. Joint work with Hannes Frederic Sowa. Suggested-by: Brad Spengler <spender@grsecurity.net> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Kees Cook <keescook@chromium.org> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-02 20:53:44 +00:00
aux = container_of(work, struct bpf_prog_aux, work);
if (bpf_prog_is_dev_bound(aux))
bpf_prog_offload_destroy(aux->prog);
bpf: x64: add JIT support for multi-function programs Typical JIT does several passes over bpf instructions to compute total size and relative offsets of jumps and calls. With multitple bpf functions calling each other all relative calls will have invalid offsets intially therefore we need to additional last pass over the program to emit calls with correct offsets. For example in case of three bpf functions: main: call foo call bpf_map_lookup exit foo: call bar exit bar: exit We will call bpf_int_jit_compile() indepedently for main(), foo() and bar() x64 JIT typically does 4-5 passes to converge. After these initial passes the image for these 3 functions will be good except call targets, since start addresses of foo() and bar() are unknown when we were JITing main() (note that call bpf_map_lookup will be resolved properly during initial passes). Once start addresses of 3 functions are known we patch call_insn->imm to point to right functions and call bpf_int_jit_compile() again which needs only one pass. Additional safety checks are done to make sure this last pass doesn't produce image that is larger or smaller than previous pass. When constant blinding is on it's applied to all functions at the first pass, since doing it once again at the last pass can change size of the JITed code. Tested on x64 and arm64 hw with JIT on/off, blinding on/off. x64 jits bpf-to-bpf calls correctly while arm64 falls back to interpreter. All other JITs that support normal BPF_CALL will behave the same way since bpf-to-bpf call is equivalent to bpf-to-kernel call from JITs point of view. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:15 +00:00
for (i = 0; i < aux->func_cnt; i++)
bpf_jit_free(aux->func[i]);
if (aux->func_cnt) {
kfree(aux->func);
bpf_prog_unlock_free(aux->prog);
} else {
bpf_jit_free(aux->prog);
}
net: bpf: make eBPF interpreter images read-only With eBPF getting more extended and exposure to user space is on it's way, hardening the memory range the interpreter uses to steer its command flow seems appropriate. This patch moves the to be interpreted bytecode to read-only pages. In case we execute a corrupted BPF interpreter image for some reason e.g. caused by an attacker which got past a verifier stage, it would not only provide arbitrary read/write memory access but arbitrary function calls as well. After setting up the BPF interpreter image, its contents do not change until destruction time, thus we can setup the image on immutable made pages in order to mitigate modifications to that code. The idea is derived from commit 314beb9bcabf ("x86: bpf_jit_comp: secure bpf jit against spraying attacks"). This is possible because bpf_prog is not part of sk_filter anymore. After setup bpf_prog cannot be altered during its life-time. This prevents any modifications to the entire bpf_prog structure (incl. function/JIT image pointer). Every eBPF program (including classic BPF that are migrated) have to call bpf_prog_select_runtime() to select either interpreter or a JIT image as a last setup step, and they all are being freed via bpf_prog_free(), including non-JIT. Therefore, we can easily integrate this into the eBPF life-time, plus since we directly allocate a bpf_prog, we have no performance penalty. Tested with seccomp and test_bpf testsuite in JIT/non-JIT mode and manual inspection of kernel_page_tables. Brad Spengler proposed the same idea via Twitter during development of this patch. Joint work with Hannes Frederic Sowa. Suggested-by: Brad Spengler <spender@grsecurity.net> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Kees Cook <keescook@chromium.org> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-02 20:53:44 +00:00
}
/* Free internal BPF program */
net: filter: split 'struct sk_filter' into socket and bpf parts clean up names related to socket filtering and bpf in the following way: - everything that deals with sockets keeps 'sk_*' prefix - everything that is pure BPF is changed to 'bpf_*' prefix split 'struct sk_filter' into struct sk_filter { atomic_t refcnt; struct rcu_head rcu; struct bpf_prog *prog; }; and struct bpf_prog { u32 jited:1, len:31; struct sock_fprog_kern *orig_prog; unsigned int (*bpf_func)(const struct sk_buff *skb, const struct bpf_insn *filter); union { struct sock_filter insns[0]; struct bpf_insn insnsi[0]; struct work_struct work; }; }; so that 'struct bpf_prog' can be used independent of sockets and cleans up 'unattached' bpf use cases split SK_RUN_FILTER macro into: SK_RUN_FILTER to be used with 'struct sk_filter *' and BPF_PROG_RUN to be used with 'struct bpf_prog *' __sk_filter_release(struct sk_filter *) gains __bpf_prog_release(struct bpf_prog *) helper function also perform related renames for the functions that work with 'struct bpf_prog *', since they're on the same lines: sk_filter_size -> bpf_prog_size sk_filter_select_runtime -> bpf_prog_select_runtime sk_filter_free -> bpf_prog_free sk_unattached_filter_create -> bpf_prog_create sk_unattached_filter_destroy -> bpf_prog_destroy sk_store_orig_filter -> bpf_prog_store_orig_filter sk_release_orig_filter -> bpf_release_orig_filter __sk_migrate_filter -> bpf_migrate_filter __sk_prepare_filter -> bpf_prepare_filter API for attaching classic BPF to a socket stays the same: sk_attach_filter(prog, struct sock *)/sk_detach_filter(struct sock *) and SK_RUN_FILTER(struct sk_filter *, ctx) to execute a program which is used by sockets, tun, af_packet API for 'unattached' BPF programs becomes: bpf_prog_create(struct bpf_prog **)/bpf_prog_destroy(struct bpf_prog *) and BPF_PROG_RUN(struct bpf_prog *, ctx) to execute a program which is used by isdn, ppp, team, seccomp, ptp, xt_bpf, cls_bpf, test_bpf Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-31 03:34:16 +00:00
void bpf_prog_free(struct bpf_prog *fp)
{
struct bpf_prog_aux *aux = fp->aux;
net: bpf: make eBPF interpreter images read-only With eBPF getting more extended and exposure to user space is on it's way, hardening the memory range the interpreter uses to steer its command flow seems appropriate. This patch moves the to be interpreted bytecode to read-only pages. In case we execute a corrupted BPF interpreter image for some reason e.g. caused by an attacker which got past a verifier stage, it would not only provide arbitrary read/write memory access but arbitrary function calls as well. After setting up the BPF interpreter image, its contents do not change until destruction time, thus we can setup the image on immutable made pages in order to mitigate modifications to that code. The idea is derived from commit 314beb9bcabf ("x86: bpf_jit_comp: secure bpf jit against spraying attacks"). This is possible because bpf_prog is not part of sk_filter anymore. After setup bpf_prog cannot be altered during its life-time. This prevents any modifications to the entire bpf_prog structure (incl. function/JIT image pointer). Every eBPF program (including classic BPF that are migrated) have to call bpf_prog_select_runtime() to select either interpreter or a JIT image as a last setup step, and they all are being freed via bpf_prog_free(), including non-JIT. Therefore, we can easily integrate this into the eBPF life-time, plus since we directly allocate a bpf_prog, we have no performance penalty. Tested with seccomp and test_bpf testsuite in JIT/non-JIT mode and manual inspection of kernel_page_tables. Brad Spengler proposed the same idea via Twitter during development of this patch. Joint work with Hannes Frederic Sowa. Suggested-by: Brad Spengler <spender@grsecurity.net> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Kees Cook <keescook@chromium.org> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-02 20:53:44 +00:00
INIT_WORK(&aux->work, bpf_prog_free_deferred);
schedule_work(&aux->work);
}
net: filter: split 'struct sk_filter' into socket and bpf parts clean up names related to socket filtering and bpf in the following way: - everything that deals with sockets keeps 'sk_*' prefix - everything that is pure BPF is changed to 'bpf_*' prefix split 'struct sk_filter' into struct sk_filter { atomic_t refcnt; struct rcu_head rcu; struct bpf_prog *prog; }; and struct bpf_prog { u32 jited:1, len:31; struct sock_fprog_kern *orig_prog; unsigned int (*bpf_func)(const struct sk_buff *skb, const struct bpf_insn *filter); union { struct sock_filter insns[0]; struct bpf_insn insnsi[0]; struct work_struct work; }; }; so that 'struct bpf_prog' can be used independent of sockets and cleans up 'unattached' bpf use cases split SK_RUN_FILTER macro into: SK_RUN_FILTER to be used with 'struct sk_filter *' and BPF_PROG_RUN to be used with 'struct bpf_prog *' __sk_filter_release(struct sk_filter *) gains __bpf_prog_release(struct bpf_prog *) helper function also perform related renames for the functions that work with 'struct bpf_prog *', since they're on the same lines: sk_filter_size -> bpf_prog_size sk_filter_select_runtime -> bpf_prog_select_runtime sk_filter_free -> bpf_prog_free sk_unattached_filter_create -> bpf_prog_create sk_unattached_filter_destroy -> bpf_prog_destroy sk_store_orig_filter -> bpf_prog_store_orig_filter sk_release_orig_filter -> bpf_release_orig_filter __sk_migrate_filter -> bpf_migrate_filter __sk_prepare_filter -> bpf_prepare_filter API for attaching classic BPF to a socket stays the same: sk_attach_filter(prog, struct sock *)/sk_detach_filter(struct sock *) and SK_RUN_FILTER(struct sk_filter *, ctx) to execute a program which is used by sockets, tun, af_packet API for 'unattached' BPF programs becomes: bpf_prog_create(struct bpf_prog **)/bpf_prog_destroy(struct bpf_prog *) and BPF_PROG_RUN(struct bpf_prog *, ctx) to execute a program which is used by isdn, ppp, team, seccomp, ptp, xt_bpf, cls_bpf, test_bpf Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-31 03:34:16 +00:00
EXPORT_SYMBOL_GPL(bpf_prog_free);
bpf: split state from prandom_u32() and consolidate {c, e}BPF prngs While recently arguing on a seccomp discussion that raw prandom_u32() access shouldn't be exposed to unpriviledged user space, I forgot the fact that SKF_AD_RANDOM extension actually already does it for some time in cBPF via commit 4cd3675ebf74 ("filter: added BPF random opcode"). Since prandom_u32() is being used in a lot of critical networking code, lets be more conservative and split their states. Furthermore, consolidate eBPF and cBPF prandom handlers to use the new internal PRNG. For eBPF, bpf_get_prandom_u32() was only accessible for priviledged users, but should that change one day, we also don't want to leak raw sequences through things like eBPF maps. One thought was also to have own per bpf_prog states, but due to ABI reasons this is not easily possible, i.e. the program code currently cannot access bpf_prog itself, and copying the rnd_state to/from the stack scratch space whenever a program uses the prng seems not really worth the trouble and seems too hacky. If needed, taus113 could in such cases be implemented within eBPF using a map entry to keep the state space, or get_random_bytes() could become a second helper in cases where performance would not be critical. Both sides can trigger a one-time late init via prandom_init_once() on the shared state. Performance-wise, there should even be a tiny gain as bpf_user_rnd_u32() saves one function call. The PRNG needs to live inside the BPF core since kernels could have a NET-less config as well. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Cc: Chema Gonzalez <chema@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07 23:20:39 +00:00
/* RNG for unpriviledged user space with separated state from prandom_u32(). */
static DEFINE_PER_CPU(struct rnd_state, bpf_user_rnd_state);
void bpf_user_rnd_init_once(void)
{
prandom_init_once(&bpf_user_rnd_state);
}
bpf: add BPF_CALL_x macros for declaring helpers This work adds BPF_CALL_<n>() macros and converts all the eBPF helper functions to use them, in a similar fashion like we do with SYSCALL_DEFINE<n>() macros that are used today. Motivation for this is to hide all the register handling and all necessary casts from the user, so that it is done automatically in the background when adding a BPF_CALL_<n>() call. This makes current helpers easier to review, eases to write future helpers, avoids getting the casting mess wrong, and allows for extending all helpers at once (f.e. build time checks, etc). It also helps detecting more easily in code reviews that unused registers are not instrumented in the code by accident, breaking compatibility with existing programs. BPF_CALL_<n>() internals are quite similar to SYSCALL_DEFINE<n>() ones with some fundamental differences, for example, for generating the actual helper function that carries all u64 regs, we need to fill unused regs, so that we always end up with 5 u64 regs as an argument. I reviewed several 0-5 generated BPF_CALL_<n>() variants of the .i results and they look all as expected. No sparse issue spotted. We let this also sit for a few days with Fengguang's kbuild test robot, and there were no issues seen. On s390, it barked on the "uses dynamic stack allocation" notice, which is an old one from bpf_perf_event_output{,_tp}() reappearing here due to the conversion to the call wrapper, just telling that the perf raw record/frag sits on stack (gcc with s390's -mwarn-dynamicstack), but that's all. Did various runtime tests and they were fine as well. All eBPF helpers are now converted to use these macros, getting rid of a good chunk of all the raw castings. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-09 00:45:31 +00:00
BPF_CALL_0(bpf_user_rnd_u32)
bpf: split state from prandom_u32() and consolidate {c, e}BPF prngs While recently arguing on a seccomp discussion that raw prandom_u32() access shouldn't be exposed to unpriviledged user space, I forgot the fact that SKF_AD_RANDOM extension actually already does it for some time in cBPF via commit 4cd3675ebf74 ("filter: added BPF random opcode"). Since prandom_u32() is being used in a lot of critical networking code, lets be more conservative and split their states. Furthermore, consolidate eBPF and cBPF prandom handlers to use the new internal PRNG. For eBPF, bpf_get_prandom_u32() was only accessible for priviledged users, but should that change one day, we also don't want to leak raw sequences through things like eBPF maps. One thought was also to have own per bpf_prog states, but due to ABI reasons this is not easily possible, i.e. the program code currently cannot access bpf_prog itself, and copying the rnd_state to/from the stack scratch space whenever a program uses the prng seems not really worth the trouble and seems too hacky. If needed, taus113 could in such cases be implemented within eBPF using a map entry to keep the state space, or get_random_bytes() could become a second helper in cases where performance would not be critical. Both sides can trigger a one-time late init via prandom_init_once() on the shared state. Performance-wise, there should even be a tiny gain as bpf_user_rnd_u32() saves one function call. The PRNG needs to live inside the BPF core since kernels could have a NET-less config as well. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Cc: Chema Gonzalez <chema@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07 23:20:39 +00:00
{
/* Should someone ever have the rather unwise idea to use some
* of the registers passed into this function, then note that
* this function is called from native eBPF and classic-to-eBPF
* transformations. Register assignments from both sides are
* different, f.e. classic always sets fn(ctx, A, X) here.
*/
struct rnd_state *state;
u32 res;
state = &get_cpu_var(bpf_user_rnd_state);
res = prandom_u32_state(state);
put_cpu_var(bpf_user_rnd_state);
bpf: split state from prandom_u32() and consolidate {c, e}BPF prngs While recently arguing on a seccomp discussion that raw prandom_u32() access shouldn't be exposed to unpriviledged user space, I forgot the fact that SKF_AD_RANDOM extension actually already does it for some time in cBPF via commit 4cd3675ebf74 ("filter: added BPF random opcode"). Since prandom_u32() is being used in a lot of critical networking code, lets be more conservative and split their states. Furthermore, consolidate eBPF and cBPF prandom handlers to use the new internal PRNG. For eBPF, bpf_get_prandom_u32() was only accessible for priviledged users, but should that change one day, we also don't want to leak raw sequences through things like eBPF maps. One thought was also to have own per bpf_prog states, but due to ABI reasons this is not easily possible, i.e. the program code currently cannot access bpf_prog itself, and copying the rnd_state to/from the stack scratch space whenever a program uses the prng seems not really worth the trouble and seems too hacky. If needed, taus113 could in such cases be implemented within eBPF using a map entry to keep the state space, or get_random_bytes() could become a second helper in cases where performance would not be critical. Both sides can trigger a one-time late init via prandom_init_once() on the shared state. Performance-wise, there should even be a tiny gain as bpf_user_rnd_u32() saves one function call. The PRNG needs to live inside the BPF core since kernels could have a NET-less config as well. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Cc: Chema Gonzalez <chema@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07 23:20:39 +00:00
return res;
}
/* Weak definitions of helper functions in case we don't have bpf syscall. */
const struct bpf_func_proto bpf_map_lookup_elem_proto __weak;
const struct bpf_func_proto bpf_map_update_elem_proto __weak;
const struct bpf_func_proto bpf_map_delete_elem_proto __weak;
const struct bpf_func_proto bpf_get_prandom_u32_proto __weak;
const struct bpf_func_proto bpf_get_smp_processor_id_proto __weak;
const struct bpf_func_proto bpf_get_numa_node_id_proto __weak;
const struct bpf_func_proto bpf_ktime_get_ns_proto __weak;
bpf: add event output helper for notifications/sampling/logging This patch adds a new helper for cls/act programs that can push events to user space applications. For networking, this can be f.e. for sampling, debugging, logging purposes or pushing of arbitrary wake-up events. The idea is similar to a43eec304259 ("bpf: introduce bpf_perf_event_output() helper") and 39111695b1b8 ("samples: bpf: add bpf_perf_event_output example"). The eBPF program utilizes a perf event array map that user space populates with fds from perf_event_open(), the eBPF program calls into the helper f.e. as skb_event_output(skb, &my_map, BPF_F_CURRENT_CPU, raw, sizeof(raw)) so that the raw data is pushed into the fd f.e. at the map index of the current CPU. User space can poll/mmap/etc on this and has a data channel for receiving events that can be post-processed. The nice thing is that since the eBPF program and user space application making use of it are tightly coupled, they can define their own arbitrary raw data format and what/when they want to push. While f.e. packet headers could be one part of the meta data that is being pushed, this is not a substitute for things like packet sockets as whole packet is not being pushed and push is only done in a single direction. Intention is more of a generically usable, efficient event pipe to applications. Workflow is that tc can pin the map and applications can attach themselves e.g. after cls/act setup to one or multiple map slots, demuxing is done by the eBPF program. Adding this facility is with minimal effort, it reuses the helper introduced in a43eec304259 ("bpf: introduce bpf_perf_event_output() helper") and we get its functionality for free by overloading its BPF_FUNC_ identifier for cls/act programs, ctx is currently unused, but will be made use of in future. Example will be added to iproute2's BPF example files. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-18 19:01:24 +00:00
const struct bpf_func_proto bpf_get_current_pid_tgid_proto __weak;
const struct bpf_func_proto bpf_get_current_uid_gid_proto __weak;
const struct bpf_func_proto bpf_get_current_comm_proto __weak;
const struct bpf_func_proto bpf_sock_map_update_proto __weak;
bpf: add event output helper for notifications/sampling/logging This patch adds a new helper for cls/act programs that can push events to user space applications. For networking, this can be f.e. for sampling, debugging, logging purposes or pushing of arbitrary wake-up events. The idea is similar to a43eec304259 ("bpf: introduce bpf_perf_event_output() helper") and 39111695b1b8 ("samples: bpf: add bpf_perf_event_output example"). The eBPF program utilizes a perf event array map that user space populates with fds from perf_event_open(), the eBPF program calls into the helper f.e. as skb_event_output(skb, &my_map, BPF_F_CURRENT_CPU, raw, sizeof(raw)) so that the raw data is pushed into the fd f.e. at the map index of the current CPU. User space can poll/mmap/etc on this and has a data channel for receiving events that can be post-processed. The nice thing is that since the eBPF program and user space application making use of it are tightly coupled, they can define their own arbitrary raw data format and what/when they want to push. While f.e. packet headers could be one part of the meta data that is being pushed, this is not a substitute for things like packet sockets as whole packet is not being pushed and push is only done in a single direction. Intention is more of a generically usable, efficient event pipe to applications. Workflow is that tc can pin the map and applications can attach themselves e.g. after cls/act setup to one or multiple map slots, demuxing is done by the eBPF program. Adding this facility is with minimal effort, it reuses the helper introduced in a43eec304259 ("bpf: introduce bpf_perf_event_output() helper") and we get its functionality for free by overloading its BPF_FUNC_ identifier for cls/act programs, ctx is currently unused, but will be made use of in future. Example will be added to iproute2's BPF example files. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-18 19:01:24 +00:00
const struct bpf_func_proto * __weak bpf_get_trace_printk_proto(void)
{
return NULL;
}
bpf: avoid stack copy and use skb ctx for event output This work addresses a couple of issues bpf_skb_event_output() helper currently has: i) We need two copies instead of just a single one for the skb data when it should be part of a sample. The data can be non-linear and thus needs to be extracted via bpf_skb_load_bytes() helper first, and then copied once again into the ring buffer slot. ii) Since bpf_skb_load_bytes() currently needs to be used first, the helper needs to see a constant size on the passed stack buffer to make sure BPF verifier can do sanity checks on it during verification time. Thus, just passing skb->len (or any other non-constant value) wouldn't work, but changing bpf_skb_load_bytes() is also not the proper solution, since the two copies are generally still needed. iii) bpf_skb_load_bytes() is just for rather small buffers like headers, since they need to sit on the limited BPF stack anyway. Instead of working around in bpf_skb_load_bytes(), this work improves the bpf_skb_event_output() helper to address all 3 at once. We can make use of the passed in skb context that we have in the helper anyway, and use some of the reserved flag bits as a length argument. The helper will use the new __output_custom() facility from perf side with bpf_skb_copy() as callback helper to walk and extract the data. It will pass the data for setup to bpf_event_output(), which generates and pushes the raw record with an additional frag part. The linear data used in the first frag of the record serves as programmatically defined meta data passed along with the appended sample. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-14 16:08:05 +00:00
u64 __weak
bpf_event_output(struct bpf_map *map, u64 flags, void *meta, u64 meta_size,
void *ctx, u64 ctx_size, bpf_ctx_copy_t ctx_copy)
bpf: add event output helper for notifications/sampling/logging This patch adds a new helper for cls/act programs that can push events to user space applications. For networking, this can be f.e. for sampling, debugging, logging purposes or pushing of arbitrary wake-up events. The idea is similar to a43eec304259 ("bpf: introduce bpf_perf_event_output() helper") and 39111695b1b8 ("samples: bpf: add bpf_perf_event_output example"). The eBPF program utilizes a perf event array map that user space populates with fds from perf_event_open(), the eBPF program calls into the helper f.e. as skb_event_output(skb, &my_map, BPF_F_CURRENT_CPU, raw, sizeof(raw)) so that the raw data is pushed into the fd f.e. at the map index of the current CPU. User space can poll/mmap/etc on this and has a data channel for receiving events that can be post-processed. The nice thing is that since the eBPF program and user space application making use of it are tightly coupled, they can define their own arbitrary raw data format and what/when they want to push. While f.e. packet headers could be one part of the meta data that is being pushed, this is not a substitute for things like packet sockets as whole packet is not being pushed and push is only done in a single direction. Intention is more of a generically usable, efficient event pipe to applications. Workflow is that tc can pin the map and applications can attach themselves e.g. after cls/act setup to one or multiple map slots, demuxing is done by the eBPF program. Adding this facility is with minimal effort, it reuses the helper introduced in a43eec304259 ("bpf: introduce bpf_perf_event_output() helper") and we get its functionality for free by overloading its BPF_FUNC_ identifier for cls/act programs, ctx is currently unused, but will be made use of in future. Example will be added to iproute2's BPF example files. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-18 19:01:24 +00:00
{
bpf: avoid stack copy and use skb ctx for event output This work addresses a couple of issues bpf_skb_event_output() helper currently has: i) We need two copies instead of just a single one for the skb data when it should be part of a sample. The data can be non-linear and thus needs to be extracted via bpf_skb_load_bytes() helper first, and then copied once again into the ring buffer slot. ii) Since bpf_skb_load_bytes() currently needs to be used first, the helper needs to see a constant size on the passed stack buffer to make sure BPF verifier can do sanity checks on it during verification time. Thus, just passing skb->len (or any other non-constant value) wouldn't work, but changing bpf_skb_load_bytes() is also not the proper solution, since the two copies are generally still needed. iii) bpf_skb_load_bytes() is just for rather small buffers like headers, since they need to sit on the limited BPF stack anyway. Instead of working around in bpf_skb_load_bytes(), this work improves the bpf_skb_event_output() helper to address all 3 at once. We can make use of the passed in skb context that we have in the helper anyway, and use some of the reserved flag bits as a length argument. The helper will use the new __output_custom() facility from perf side with bpf_skb_copy() as callback helper to walk and extract the data. It will pass the data for setup to bpf_event_output(), which generates and pushes the raw record with an additional frag part. The linear data used in the first frag of the record serves as programmatically defined meta data passed along with the appended sample. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-14 16:08:05 +00:00
return -ENOTSUPP;
bpf: add event output helper for notifications/sampling/logging This patch adds a new helper for cls/act programs that can push events to user space applications. For networking, this can be f.e. for sampling, debugging, logging purposes or pushing of arbitrary wake-up events. The idea is similar to a43eec304259 ("bpf: introduce bpf_perf_event_output() helper") and 39111695b1b8 ("samples: bpf: add bpf_perf_event_output example"). The eBPF program utilizes a perf event array map that user space populates with fds from perf_event_open(), the eBPF program calls into the helper f.e. as skb_event_output(skb, &my_map, BPF_F_CURRENT_CPU, raw, sizeof(raw)) so that the raw data is pushed into the fd f.e. at the map index of the current CPU. User space can poll/mmap/etc on this and has a data channel for receiving events that can be post-processed. The nice thing is that since the eBPF program and user space application making use of it are tightly coupled, they can define their own arbitrary raw data format and what/when they want to push. While f.e. packet headers could be one part of the meta data that is being pushed, this is not a substitute for things like packet sockets as whole packet is not being pushed and push is only done in a single direction. Intention is more of a generically usable, efficient event pipe to applications. Workflow is that tc can pin the map and applications can attach themselves e.g. after cls/act setup to one or multiple map slots, demuxing is done by the eBPF program. Adding this facility is with minimal effort, it reuses the helper introduced in a43eec304259 ("bpf: introduce bpf_perf_event_output() helper") and we get its functionality for free by overloading its BPF_FUNC_ identifier for cls/act programs, ctx is currently unused, but will be made use of in future. Example will be added to iproute2's BPF example files. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-18 19:01:24 +00:00
}
/* Always built-in helper functions. */
const struct bpf_func_proto bpf_tail_call_proto = {
.func = NULL,
.gpl_only = false,
.ret_type = RET_VOID,
.arg1_type = ARG_PTR_TO_CTX,
.arg2_type = ARG_CONST_MAP_PTR,
.arg3_type = ARG_ANYTHING,
};
/* Stub for JITs that only support cBPF. eBPF programs are interpreted.
* It is encouraged to implement bpf_int_jit_compile() instead, so that
* eBPF and implicitly also cBPF can get JITed!
*/
struct bpf_prog * __weak bpf_int_jit_compile(struct bpf_prog *prog)
{
return prog;
}
/* Stub for JITs that support eBPF. All cBPF code gets transformed into
* eBPF by the kernel and is later compiled by bpf_int_jit_compile().
*/
void __weak bpf_jit_compile(struct bpf_prog *prog)
{
}
bool __weak bpf_helper_changes_pkt_data(void *func)
bpf: direct packet access Extended BPF carried over two instructions from classic to access packet data: LD_ABS and LD_IND. They're highly optimized in JITs, but due to their design they have to do length check for every access. When BPF is processing 20M packets per second single LD_ABS after JIT is consuming 3% cpu. Hence the need to optimize it further by amortizing the cost of 'off < skb_headlen' over multiple packet accesses. One option is to introduce two new eBPF instructions LD_ABS_DW and LD_IND_DW with similar usage as skb_header_pointer(). The kernel part for interpreter and x64 JIT was implemented in [1], but such new insns behave like old ld_abs and abort the program with 'return 0' if access is beyond linear data. Such hidden control flow is hard to workaround plus changing JITs and rolling out new llvm is incovenient. Therefore allow cls_bpf/act_bpf program access skb->data directly: int bpf_prog(struct __sk_buff *skb) { struct iphdr *ip; if (skb->data + sizeof(struct iphdr) + ETH_HLEN > skb->data_end) /* packet too small */ return 0; ip = skb->data + ETH_HLEN; /* access IP header fields with direct loads */ if (ip->version != 4 || ip->saddr == 0x7f000001) return 1; [...] } This solution avoids introduction of new instructions. llvm stays the same and all JITs stay the same, but verifier has to work extra hard to prove safety of the above program. For XDP the direct store instructions can be allowed as well. The skb->data is NET_IP_ALIGNED, so for common cases the verifier can check the alignment. The complex packet parsers where packet pointer is adjusted incrementally cannot be tracked for alignment, so allow byte access in such cases and misaligned access on architectures that define efficient_unaligned_access [1] https://git.kernel.org/cgit/linux/kernel/git/ast/bpf.git/?h=ld_abs_dw Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-06 02:49:10 +00:00
{
return false;
}
/* To execute LD_ABS/LD_IND instructions __bpf_prog_run() may call
* skb_copy_bits(), so provide a weak definition of it for NET-less config.
*/
int __weak skb_copy_bits(const struct sk_buff *skb, int offset, void *to,
int len)
{
return -EFAULT;
}
bpf: add initial bpf tracepoints This work adds a number of tracepoints to paths that are either considered slow-path or exception-like states, where monitoring or inspecting them would be desirable. For bpf(2) syscall, tracepoints have been placed for main commands when they succeed. In XDP case, tracepoint is for exceptions, that is, f.e. on abnormal BPF program exit such as unknown or XDP_ABORTED return code, or when error occurs during XDP_TX action and the packet could not be forwarded. Both have been split into separate event headers, and can be further extended. Worst case, if they unexpectedly should get into our way in future, they can also removed [1]. Of course, these tracepoints (like any other) can be analyzed by eBPF itself, etc. Example output: # ./perf record -a -e bpf:* sleep 10 # ./perf script sock_example 6197 [005] 283.980322: bpf:bpf_map_create: map type=ARRAY ufd=4 key=4 val=8 max=256 flags=0 sock_example 6197 [005] 283.980721: bpf:bpf_prog_load: prog=a5ea8fa30ea6849c type=SOCKET_FILTER ufd=5 sock_example 6197 [005] 283.988423: bpf:bpf_prog_get_type: prog=a5ea8fa30ea6849c type=SOCKET_FILTER sock_example 6197 [005] 283.988443: bpf:bpf_map_lookup_elem: map type=ARRAY ufd=4 key=[06 00 00 00] val=[00 00 00 00 00 00 00 00] [...] sock_example 6197 [005] 288.990868: bpf:bpf_map_lookup_elem: map type=ARRAY ufd=4 key=[01 00 00 00] val=[14 00 00 00 00 00 00 00] swapper 0 [005] 289.338243: bpf:bpf_prog_put_rcu: prog=a5ea8fa30ea6849c type=SOCKET_FILTER [1] https://lwn.net/Articles/705270/ Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-25 01:28:18 +00:00
/* All definitions of tracepoints related to BPF. */
#define CREATE_TRACE_POINTS
#include <linux/bpf_trace.h>
EXPORT_TRACEPOINT_SYMBOL_GPL(xdp_exception);
/* These are only used within the BPF_SYSCALL code */
#ifdef CONFIG_BPF_SYSCALL
bpf: add initial bpf tracepoints This work adds a number of tracepoints to paths that are either considered slow-path or exception-like states, where monitoring or inspecting them would be desirable. For bpf(2) syscall, tracepoints have been placed for main commands when they succeed. In XDP case, tracepoint is for exceptions, that is, f.e. on abnormal BPF program exit such as unknown or XDP_ABORTED return code, or when error occurs during XDP_TX action and the packet could not be forwarded. Both have been split into separate event headers, and can be further extended. Worst case, if they unexpectedly should get into our way in future, they can also removed [1]. Of course, these tracepoints (like any other) can be analyzed by eBPF itself, etc. Example output: # ./perf record -a -e bpf:* sleep 10 # ./perf script sock_example 6197 [005] 283.980322: bpf:bpf_map_create: map type=ARRAY ufd=4 key=4 val=8 max=256 flags=0 sock_example 6197 [005] 283.980721: bpf:bpf_prog_load: prog=a5ea8fa30ea6849c type=SOCKET_FILTER ufd=5 sock_example 6197 [005] 283.988423: bpf:bpf_prog_get_type: prog=a5ea8fa30ea6849c type=SOCKET_FILTER sock_example 6197 [005] 283.988443: bpf:bpf_map_lookup_elem: map type=ARRAY ufd=4 key=[06 00 00 00] val=[00 00 00 00 00 00 00 00] [...] sock_example 6197 [005] 288.990868: bpf:bpf_map_lookup_elem: map type=ARRAY ufd=4 key=[01 00 00 00] val=[14 00 00 00 00 00 00 00] swapper 0 [005] 289.338243: bpf:bpf_prog_put_rcu: prog=a5ea8fa30ea6849c type=SOCKET_FILTER [1] https://lwn.net/Articles/705270/ Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-25 01:28:18 +00:00
EXPORT_TRACEPOINT_SYMBOL_GPL(bpf_prog_get_type);
EXPORT_TRACEPOINT_SYMBOL_GPL(bpf_prog_put_rcu);
#endif