linux/sound/soc/codecs/Kconfig

1616 lines
36 KiB
Plaintext
Raw Normal View History

# SPDX-License-Identifier: GPL-2.0-only
# Helper to resolve issues with configs that have SPI enabled but I2C
# modular, meaning we can't build the codec driver in with I2C support.
# We use an ordered list of conditional defaults to pick the appropriate
# setting - SPI can't be modular so that case doesn't need to be covered.
config SND_SOC_I2C_AND_SPI
tristate
default m if I2C=m
default y if I2C=y
default y if SPI_MASTER=y
menu "CODEC drivers"
config SND_SOC_ALL_CODECS
tristate "Build all ASoC CODEC drivers"
depends on COMPILE_TEST
select SND_SOC_88PM860X if MFD_88PM860X
select SND_SOC_L3
select SND_SOC_AB8500_CODEC if ABX500_CORE
select SND_SOC_AC97_CODEC
select SND_SOC_AD1836 if SPI_MASTER
select SND_SOC_AD193X_SPI if SPI_MASTER
select SND_SOC_AD193X_I2C if I2C
select SND_SOC_AD1980 if SND_SOC_AC97_BUS
select SND_SOC_AD73311
select SND_SOC_ADAU1373 if I2C
select SND_SOC_ADAU1761_I2C if I2C
select SND_SOC_ADAU1761_SPI if SPI
select SND_SOC_ADAU1781_I2C if I2C
select SND_SOC_ADAU1781_SPI if SPI
select SND_SOC_ADAV801 if SPI_MASTER
select SND_SOC_ADAV803 if I2C
select SND_SOC_ADAU1977_SPI if SPI_MASTER
select SND_SOC_ADAU1977_I2C if I2C
select SND_SOC_ADAU1701 if I2C
select SND_SOC_ADAU7002
select SND_SOC_ADAU7118_I2C if I2C
select SND_SOC_ADAU7118_HW
select SND_SOC_ADS117X
select SND_SOC_AK4104 if SPI_MASTER
select SND_SOC_AK4118 if I2C
select SND_SOC_AK4458 if I2C
select SND_SOC_AK4535 if I2C
select SND_SOC_AK4554
select SND_SOC_AK4613 if I2C
select SND_SOC_AK4641 if I2C
select SND_SOC_AK4642 if I2C
select SND_SOC_AK4671 if I2C
select SND_SOC_AK5386
select SND_SOC_AK5558 if I2C
select SND_SOC_ALC5623 if I2C
select SND_SOC_ALC5632 if I2C
select SND_SOC_BT_SCO
select SND_SOC_BD28623
select SND_SOC_CQ0093VC
select SND_SOC_CROS_EC_CODEC if CROS_EC
select SND_SOC_CS35L32 if I2C
select SND_SOC_CS35L33 if I2C
select SND_SOC_CS35L34 if I2C
select SND_SOC_CS35L35 if I2C
select SND_SOC_CS35L36 if I2C
select SND_SOC_CS42L42 if I2C
select SND_SOC_CS42L51_I2C if I2C
select SND_SOC_CS42L52 if I2C && INPUT
select SND_SOC_CS42L56 if I2C && INPUT
select SND_SOC_CS42L73 if I2C
select SND_SOC_CS4265 if I2C
select SND_SOC_CS4270 if I2C
select SND_SOC_CS4271_I2C if I2C
select SND_SOC_CS4271_SPI if SPI_MASTER
select SND_SOC_CS42XX8_I2C if I2C
select SND_SOC_CS43130 if I2C
select SND_SOC_CS4341 if SND_SOC_I2C_AND_SPI
select SND_SOC_CS4349 if I2C
select SND_SOC_CS47L15 if MFD_CS47L15
select SND_SOC_CS47L24 if MFD_CS47L24
select SND_SOC_CS47L35 if MFD_CS47L35
select SND_SOC_CS47L85 if MFD_CS47L85
select SND_SOC_CS47L90 if MFD_CS47L90
select SND_SOC_CS47L92 if MFD_CS47L92
select SND_SOC_CS53L30 if I2C
select SND_SOC_CX20442 if TTY
ASoC: Add support for Conexant CX2072X CODEC Initial commit of the Conexant CX2072X CODEC driver. Some features are not present. The CX2072X is a ultra low power stereo audio codec supports I2S/TDM host interface with EQ, DRC features in playback mode. Featues of CX2072X codec: * Two 24 bits DACs and DACs. * Stereo Headphone AMP. * 2.8W per channel class-D output. * Integrated seven bands per channel EQ and DRC. * Fully integrated headset support with detect/switch. * Stereo digital microphone for array applications. * S/PDIF output. * Bi-directional GPIOs. * Support analog and digital PC Beeep. * One headset button support. * Supports a wide variety of host interfaces. -wide variety of I2S and similar bit-stream formats with word lengths of up to 24 bits. -TDM stream supports up to 4 channels. * AEC loopback support. Further fixes by tiwai: * Rebase to 5.2+ * Missing DAPM entry definitions * Missing power hooks * Fix uninitialized variable warning * Rewrite jack detection stuff to use set_jack callback * Plumbing jack detection code for Intel ASoC * Move clk management into runtime PM * Drop incorrect regcache usages * Drop untested stuff: OF table, EQ/DRC handling * Lots of code cleanups and minor refactoring The OF code was dropped due to the lack of testability. It should be easy to re-add once if someone can test it. v1->v2: No change v2->v3: Move register tables to appropriate place Remove some confusing codes Set snd_ctl_boolean_* helpers directly Fix EQ put callback Rename to "DAC1 Switch" from "DAC1 Mute Switch" Drop superfluous regmap calls at shutdown Avoid regmap_register_patch() Add missing register definitions Fix register access on big-endian machine Remove regcache messes v3->v4: Fix the wrong endianess conversion in reg write Minor code cleanups v4->v5: Move clk management to runtime PM Sparse warning fixes Some more code simplification Drop tricky regcache fiddling Apply mutex locks around possible racy sequences Move exported jack detection stuff into set_jack callback v5->v6: Drop buggy&untested EQ and DRC codes Lots of code reduction/cleanup Add more comments about platform-specific stuff Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=115531 Signed-off-by: Simon Ho <simon.ho@conexant.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-21 06:26:52 +00:00
select SND_SOC_CX2072X if I2C
select SND_SOC_DA7210 if SND_SOC_I2C_AND_SPI
select SND_SOC_DA7213 if I2C
select SND_SOC_DA7218 if I2C
select SND_SOC_DA7219 if I2C
select SND_SOC_DA732X if I2C
select SND_SOC_DA9055 if I2C
select SND_SOC_DMIC if GPIOLIB
select SND_SOC_ES8316 if I2C
select SND_SOC_ES8328_SPI if SPI_MASTER
select SND_SOC_ES8328_I2C if I2C
select SND_SOC_ES7134
select SND_SOC_ES7241
select SND_SOC_GTM601
select SND_SOC_HDAC_HDMI
select SND_SOC_HDAC_HDA
select SND_SOC_ICS43432
select SND_SOC_INNO_RK3036
select SND_SOC_ISABELLE if I2C
select SND_SOC_JZ4740_CODEC
select SND_SOC_JZ4725B_CODEC
select SND_SOC_JZ4770_CODEC
select SND_SOC_LM4857 if I2C
select SND_SOC_LM49453 if I2C
select SND_SOC_LOCHNAGAR_SC if MFD_LOCHNAGAR
select SND_SOC_MAX98088 if I2C
select SND_SOC_MAX98090 if I2C
select SND_SOC_MAX98095 if I2C
select SND_SOC_MAX98357A if GPIOLIB
select SND_SOC_MAX98371 if I2C
select SND_SOC_MAX98504 if I2C
select SND_SOC_MAX9867 if I2C
select SND_SOC_MAX98925 if I2C
select SND_SOC_MAX98926 if I2C
select SND_SOC_MAX98927 if I2C
select SND_SOC_MAX98373 if I2C
select SND_SOC_MAX9850 if I2C
select SND_SOC_MAX9860 if I2C
select SND_SOC_MAX9759
select SND_SOC_MAX9768 if I2C
select SND_SOC_MAX9877 if I2C
select SND_SOC_MC13783 if MFD_MC13XXX
select SND_SOC_ML26124 if I2C
select SND_SOC_MT6351 if MTK_PMIC_WRAP
select SND_SOC_MT6358 if MTK_PMIC_WRAP
select SND_SOC_MT6660 if I2C
select SND_SOC_NAU8540 if I2C
select SND_SOC_NAU8810 if I2C
select SND_SOC_NAU8822 if I2C
select SND_SOC_NAU8824 if I2C
select SND_SOC_NAU8825 if I2C
select SND_SOC_HDMI_CODEC
select SND_SOC_PCM1681 if I2C
select SND_SOC_PCM1789_I2C if I2C
select SND_SOC_PCM179X_I2C if I2C
select SND_SOC_PCM179X_SPI if SPI_MASTER
select SND_SOC_PCM186X_I2C if I2C
select SND_SOC_PCM186X_SPI if SPI_MASTER
select SND_SOC_PCM3008
select SND_SOC_PCM3060_I2C if I2C
select SND_SOC_PCM3060_SPI if SPI_MASTER
select SND_SOC_PCM3168A_I2C if I2C
select SND_SOC_PCM3168A_SPI if SPI_MASTER
select SND_SOC_PCM5102A
select SND_SOC_PCM512x_I2C if I2C
select SND_SOC_PCM512x_SPI if SPI_MASTER
select SND_SOC_RK3328
select SND_SOC_RT274 if I2C
select SND_SOC_RT286 if I2C
select SND_SOC_RT298 if I2C
select SND_SOC_RT1011 if I2C
select SND_SOC_RT1015 if I2C
select SND_SOC_RT1305 if I2C
select SND_SOC_RT1308 if I2C
select SND_SOC_RT5514 if I2C
select SND_SOC_RT5616 if I2C
select SND_SOC_RT5631 if I2C
select SND_SOC_RT5640 if I2C
select SND_SOC_RT5645 if I2C
select SND_SOC_RT5651 if I2C
select SND_SOC_RT5659 if I2C
select SND_SOC_RT5660 if I2C
select SND_SOC_RT5663 if I2C
select SND_SOC_RT5665 if I2C
select SND_SOC_RT5668 if I2C
select SND_SOC_RT5670 if I2C
select SND_SOC_RT5677 if I2C && SPI_MASTER
select SND_SOC_RT5682 if I2C
select SND_SOC_RT700_SDW if SOUNDWIRE
select SND_SOC_RT711_SDW if SOUNDWIRE
select SND_SOC_RT715_SDW if SOUNDWIRE
select SND_SOC_RT1308_SDW if SOUNDWIRE
select SND_SOC_SGTL5000 if I2C
select SND_SOC_SI476X if MFD_SI476X_CORE
select SND_SOC_SIMPLE_AMPLIFIER
select SND_SOC_SIRF_AUDIO_CODEC
select SND_SOC_SPDIF
select SND_SOC_SSM2305
select SND_SOC_SSM2518 if I2C
select SND_SOC_SSM2602_SPI if SPI_MASTER
select SND_SOC_SSM2602_I2C if I2C
select SND_SOC_SSM4567 if I2C
select SND_SOC_STA32X if I2C
select SND_SOC_STA350 if I2C
select SND_SOC_STA529 if I2C
select SND_SOC_STAC9766 if SND_SOC_AC97_BUS
select SND_SOC_STI_SAS
select SND_SOC_TAS2552 if I2C
select SND_SOC_TAS2562 if I2C
select SND_SOC_TAS2770 if I2C
select SND_SOC_TAS5086 if I2C
select SND_SOC_TAS571X if I2C
select SND_SOC_TAS5720 if I2C
select SND_SOC_TAS6424 if I2C
select SND_SOC_TDA7419 if I2C
select SND_SOC_TFA9879 if I2C
select SND_SOC_TLV320AIC23_I2C if I2C
select SND_SOC_TLV320AIC23_SPI if SPI_MASTER
select SND_SOC_TLV320AIC26 if SPI_MASTER
select SND_SOC_TLV320AIC31XX if I2C
select SND_SOC_TLV320AIC32X4_I2C if I2C && COMMON_CLK
select SND_SOC_TLV320AIC32X4_SPI if SPI_MASTER && COMMON_CLK
select SND_SOC_TLV320AIC3X if I2C
select SND_SOC_TPA6130A2 if I2C
select SND_SOC_TLV320DAC33 if I2C
select SND_SOC_TSCS42XX if I2C
select SND_SOC_TSCS454 if I2C
select SND_SOC_TS3A227E if I2C
select SND_SOC_TWL4030 if TWL4030_CORE
select SND_SOC_TWL6040 if TWL6040_CORE
select SND_SOC_UDA1334 if GPIOLIB
select SND_SOC_UDA134X
select SND_SOC_UDA1380 if I2C
select SND_SOC_WCD9335 if SLIMBUS
select SND_SOC_WCD934X if MFD_WCD934X
select SND_SOC_WL1273 if MFD_WL1273_CORE
select SND_SOC_WM0010 if SPI_MASTER
select SND_SOC_WM1250_EV1 if I2C
select SND_SOC_WM2000 if I2C
select SND_SOC_WM2200 if I2C
select SND_SOC_WM5100 if I2C
select SND_SOC_WM5102 if MFD_WM5102
select SND_SOC_WM5110 if MFD_WM5110
select SND_SOC_WM8350 if MFD_WM8350
select SND_SOC_WM8400 if MFD_WM8400
select SND_SOC_WM8510 if SND_SOC_I2C_AND_SPI
select SND_SOC_WM8523 if I2C
select SND_SOC_WM8524 if GPIOLIB
select SND_SOC_WM8580 if I2C
select SND_SOC_WM8711 if SND_SOC_I2C_AND_SPI
select SND_SOC_WM8727
select SND_SOC_WM8728 if SND_SOC_I2C_AND_SPI
select SND_SOC_WM8731 if SND_SOC_I2C_AND_SPI
select SND_SOC_WM8737 if SND_SOC_I2C_AND_SPI
select SND_SOC_WM8741 if SND_SOC_I2C_AND_SPI
select SND_SOC_WM8750 if SND_SOC_I2C_AND_SPI
select SND_SOC_WM8753 if SND_SOC_I2C_AND_SPI
select SND_SOC_WM8770 if SPI_MASTER
select SND_SOC_WM8776 if SND_SOC_I2C_AND_SPI
select SND_SOC_WM8782
select SND_SOC_WM8804_I2C if I2C
select SND_SOC_WM8804_SPI if SPI_MASTER
select SND_SOC_WM8900 if I2C
select SND_SOC_WM8903 if I2C
select SND_SOC_WM8904 if I2C
select SND_SOC_WM8940 if I2C
select SND_SOC_WM8955 if I2C
select SND_SOC_WM8960 if I2C
select SND_SOC_WM8961 if I2C
select SND_SOC_WM8962 if I2C && INPUT
select SND_SOC_WM8971 if I2C
select SND_SOC_WM8974 if I2C
select SND_SOC_WM8978 if I2C
select SND_SOC_WM8983 if SND_SOC_I2C_AND_SPI
select SND_SOC_WM8985 if SND_SOC_I2C_AND_SPI
select SND_SOC_WM8988 if SND_SOC_I2C_AND_SPI
select SND_SOC_WM8990 if I2C
select SND_SOC_WM8991 if I2C
select SND_SOC_WM8993 if I2C
select SND_SOC_WM8994 if MFD_WM8994
select SND_SOC_WM8995 if SND_SOC_I2C_AND_SPI
select SND_SOC_WM8996 if I2C
select SND_SOC_WM8997 if MFD_WM8997
select SND_SOC_WM8998 if MFD_WM8998
select SND_SOC_WM9081 if I2C
select SND_SOC_WM9090 if I2C
select SND_SOC_WM9705 if (SND_SOC_AC97_BUS || SND_SOC_AC97_BUS_NEW)
select SND_SOC_WM9712 if (SND_SOC_AC97_BUS || SND_SOC_AC97_BUS_NEW)
select SND_SOC_WM9713 if (SND_SOC_AC97_BUS || SND_SOC_AC97_BUS_NEW)
select SND_SOC_WSA881X if SOUNDWIRE
help
Normally ASoC codec drivers are only built if a machine driver which
uses them is also built since they are only usable with a machine
driver. Selecting this option will allow these drivers to be built
without an explicit machine driver for test and development purposes.
Support for the bus types used to access the codecs to be built must
be selected separately.
If unsure select "N".
config SND_SOC_88PM860X
tristate
config SND_SOC_ARIZONA
tristate
default y if SND_SOC_CS47L24=y
default y if SND_SOC_WM5102=y
default y if SND_SOC_WM5110=y
default y if SND_SOC_WM8997=y
default y if SND_SOC_WM8998=y
default m if SND_SOC_CS47L24=m
default m if SND_SOC_WM5102=m
default m if SND_SOC_WM5110=m
default m if SND_SOC_WM8997=m
default m if SND_SOC_WM8998=m
config SND_SOC_WM_HUBS
tristate
default y if SND_SOC_WM8993=y || SND_SOC_WM8994=y
default m if SND_SOC_WM8993=m || SND_SOC_WM8994=m
config SND_SOC_WM_ADSP
tristate
select SND_SOC_COMPRESS
default y if SND_SOC_MADERA=y
default y if SND_SOC_CS47L24=y
default y if SND_SOC_WM5102=y
default y if SND_SOC_WM5110=y
default y if SND_SOC_WM2200=y
default m if SND_SOC_MADERA=m
default m if SND_SOC_CS47L24=m
default m if SND_SOC_WM5102=m
default m if SND_SOC_WM5110=m
default m if SND_SOC_WM2200=m
config SND_SOC_AB8500_CODEC
tristate
config SND_SOC_AC97_CODEC
tristate "Build generic ASoC AC97 CODEC driver"
select SND_AC97_CODEC
select SND_SOC_AC97_BUS
config SND_SOC_AD1836
tristate
config SND_SOC_AD193X
tristate
config SND_SOC_AD193X_SPI
tristate
select SND_SOC_AD193X
config SND_SOC_AD193X_I2C
tristate
select SND_SOC_AD193X
config SND_SOC_AD1980
select REGMAP_AC97
tristate
config SND_SOC_AD73311
tristate
config SND_SOC_ADAU_UTILS
tristate
config SND_SOC_ADAU1373
tristate
select SND_SOC_ADAU_UTILS
config SND_SOC_ADAU1701
tristate "Analog Devices ADAU1701 CODEC"
depends on I2C
select SND_SOC_SIGMADSP_I2C
config SND_SOC_ADAU17X1
tristate
select SND_SOC_SIGMADSP_REGMAP
select SND_SOC_ADAU_UTILS
config SND_SOC_ADAU1761
tristate
select SND_SOC_ADAU17X1
config SND_SOC_ADAU1761_I2C
tristate "Analog Devices AU1761 CODEC - I2C"
depends on I2C
select SND_SOC_ADAU1761
select REGMAP_I2C
config SND_SOC_ADAU1761_SPI
tristate "Analog Devices AU1761 CODEC - SPI"
depends on SPI
select SND_SOC_ADAU1761
select REGMAP_SPI
config SND_SOC_ADAU1781
select SND_SOC_ADAU17X1
tristate
config SND_SOC_ADAU1781_I2C
tristate
select SND_SOC_ADAU1781
select REGMAP_I2C
config SND_SOC_ADAU1781_SPI
tristate
select SND_SOC_ADAU1781
select REGMAP_SPI
config SND_SOC_ADAU1977
tristate
config SND_SOC_ADAU1977_SPI
tristate
select SND_SOC_ADAU1977
select REGMAP_SPI
config SND_SOC_ADAU1977_I2C
tristate
select SND_SOC_ADAU1977
select REGMAP_I2C
config SND_SOC_ADAU7002
tristate "Analog Devices ADAU7002 Stereo PDM-to-I2S/TDM Converter"
config SND_SOC_ADAU7118
tristate
config SND_SOC_ADAU7118_HW
tristate "Analog Devices ADAU7118 8 Channel PDM-to-I2S/TDM Converter - HW Mode"
select SND_SOC_ADAU7118
help
Enable support for the Analog Devices ADAU7118 8 Channel PDM-to-I2S/TDM
Converter. In this mode, the device works in standalone mode which
means that there is no bus to comunicate with it. Stereo mode is not
supported in this mode.
To compile this driver as a module, choose M here: the module
will be called snd-soc-adau7118-hw.
config SND_SOC_ADAU7118_I2C
tristate "Analog Devices ADAU7118 8 Channel PDM-to-I2S/TDM Converter - I2C"
depends on I2C
select SND_SOC_ADAU7118
select REGMAP_I2C
help
Enable support for the Analog Devices ADAU7118 8 Channel PDM-to-I2S/TDM
Converter over I2C. This gives full support over the device.
To compile this driver as a module, choose M here: the module
will be called snd-soc-adau7118-i2c.
config SND_SOC_ADAV80X
tristate
config SND_SOC_ADAV801
tristate
select SND_SOC_ADAV80X
config SND_SOC_ADAV803
tristate
select SND_SOC_ADAV80X
config SND_SOC_ADS117X
tristate
config SND_SOC_AK4104
tristate "AKM AK4104 CODEC"
depends on SPI_MASTER
config SND_SOC_AK4118
tristate "AKM AK4118 CODEC"
depends on I2C
select REGMAP_I2C
config SND_SOC_AK4458
tristate "AKM AK4458 CODEC"
depends on I2C
select REGMAP_I2C
config SND_SOC_AK4535
tristate
config SND_SOC_AK4554
tristate "AKM AK4554 CODEC"
config SND_SOC_AK4613
tristate "AKM AK4613 CODEC"
depends on I2C
config SND_SOC_AK4641
tristate
config SND_SOC_AK4642
tristate "AKM AK4642 CODEC"
depends on I2C
config SND_SOC_AK4671
tristate
config SND_SOC_AK5386
tristate "AKM AK5638 CODEC"
config SND_SOC_AK5558
tristate "AKM AK5558 CODEC"
depends on I2C
select REGMAP_I2C
config SND_SOC_ALC5623
tristate "Realtek ALC5623 CODEC"
depends on I2C
config SND_SOC_ALC5632
tristate
config SND_SOC_BD28623
tristate "ROHM BD28623 CODEC"
help
Enable support for ROHM BD28623MUV Class D speaker amplifier.
This codec does not have any control buses such as I2C, it
detect format of I2S automatically.
config SND_SOC_BT_SCO
tristate "Dummy BT SCO codec driver"
config SND_SOC_CPCAP
tristate "Motorola CPCAP codec"
depends on MFD_CPCAP
config SND_SOC_CQ0093VC
tristate
config SND_SOC_CROS_EC_CODEC
tristate "codec driver for ChromeOS EC"
depends on CROS_EC
select CRYPTO
select CRYPTO_SHA256
help
If you say yes here you will get support for the
ChromeOS Embedded Controller's Audio Codec.
config SND_SOC_CS35L32
tristate "Cirrus Logic CS35L32 CODEC"
depends on I2C
config SND_SOC_CS35L33
tristate "Cirrus Logic CS35L33 CODEC"
depends on I2C
config SND_SOC_CS35L34
tristate "Cirrus Logic CS35L34 CODEC"
depends on I2C
config SND_SOC_CS35L35
tristate "Cirrus Logic CS35L35 CODEC"
depends on I2C
config SND_SOC_CS35L36
tristate "Cirrus Logic CS35L36 CODEC"
depends on I2C
config SND_SOC_CS42L42
tristate "Cirrus Logic CS42L42 CODEC"
depends on I2C
config SND_SOC_CS42L51
tristate
config SND_SOC_CS42L51_I2C
tristate "Cirrus Logic CS42L51 CODEC (I2C)"
depends on I2C
select SND_SOC_CS42L51
config SND_SOC_CS42L52
tristate "Cirrus Logic CS42L52 CODEC"
depends on I2C && INPUT
config SND_SOC_CS42L56
tristate "Cirrus Logic CS42L56 CODEC"
depends on I2C && INPUT
config SND_SOC_CS42L73
tristate "Cirrus Logic CS42L73 CODEC"
depends on I2C
config SND_SOC_CS4265
tristate "Cirrus Logic CS4265 CODEC"
depends on I2C
select REGMAP_I2C
# Cirrus Logic CS4270 Codec
config SND_SOC_CS4270
tristate "Cirrus Logic CS4270 CODEC"
depends on I2C
# Cirrus Logic CS4270 Codec VD = 3.3V Errata
# Select if you are affected by the errata where the part will not function
# if MCLK divide-by-1.5 is selected and VD is set to 3.3V. The driver will
# not select any sample rates that require MCLK to be divided by 1.5.
config SND_SOC_CS4270_VD33_ERRATA
bool
depends on SND_SOC_CS4270
config SND_SOC_CS4271
tristate
config SND_SOC_CS4271_I2C
tristate "Cirrus Logic CS4271 CODEC (I2C)"
depends on I2C
select SND_SOC_CS4271
select REGMAP_I2C
config SND_SOC_CS4271_SPI
tristate "Cirrus Logic CS4271 CODEC (SPI)"
depends on SPI_MASTER
select SND_SOC_CS4271
select REGMAP_SPI
config SND_SOC_CS42XX8
tristate
config SND_SOC_CS42XX8_I2C
tristate "Cirrus Logic CS42448/CS42888 CODEC (I2C)"
depends on I2C
select SND_SOC_CS42XX8
select REGMAP_I2C
# Cirrus Logic CS43130 HiFi DAC
config SND_SOC_CS43130
tristate "Cirrus Logic CS43130 CODEC"
depends on I2C
config SND_SOC_CS4341
tristate "Cirrus Logic CS4341 CODEC"
depends on SND_SOC_I2C_AND_SPI
select REGMAP_I2C if I2C
select REGMAP_SPI if SPI_MASTER
# Cirrus Logic CS4349 HiFi DAC
config SND_SOC_CS4349
tristate "Cirrus Logic CS4349 CODEC"
depends on I2C
config SND_SOC_CS47L15
tristate
config SND_SOC_CS47L24
tristate
config SND_SOC_CS47L35
tristate
config SND_SOC_CS47L85
tristate
config SND_SOC_CS47L90
tristate
config SND_SOC_CS47L92
tristate
# Cirrus Logic Quad-Channel ADC
config SND_SOC_CS53L30
tristate "Cirrus Logic CS53L30 CODEC"
depends on I2C
ASoC: Add support for Conexant CX20442-11 voice modem codec This patch adds support for Conexant CX20442-11 voice modem codec, suitable for use by the ASoC board driver for Amstrad E3 (Delta) videophone. Related sound card driver will follow. This codec is an optional part of the Conexant SmartV three chip modem design. As such, documentation for its proprietary digital audio interface is not available. However, on Amstrad Delta board, thanks to Mark Underwood who created an initial, omap-alsa based sound driver a few years ago[1], the codec has been discovered to be accessible not only from the modem side, but also over the OMAP McBSP based CPU DAI. Thus, the driver can be used by any sound card that can access the codec DAI directly. The DAI configuration parameters (sample rate and format, number of channels) has been selected out empirically for best user experience. The codec analogue interface consists of two pairs of analogue I/O pins: speakerphone interface or telephone handset/headset interface. Furthermore, it seams to provide two operation modes for speakerphone I/O: standard and advanced, with automatic gain control and echo cancelation. Even if the codec control interface is unknown and not available, all those interfaces and modes can be selected over the modem chip using V.253 commands. The driver is able to issue necessary commands over a suitable hw_write function if provided by a sound card driver. Otherwise, the codec can be controlled over the modem from userspace while inactive. Even if nothig is known about the codec internal power management capabilities, DAPM widgets has been used to model the codec audio map. Automatically performed powering up/down of those virtual widgets results in corresponding V.253 commands being issued. Some driver features/oddities may be board specific, but I have no way to verify that with any board other than Amstrad Delta. [1] http://www.earth.li/pipermail/e3-hacking/2006-April/000481.html Created and tested against linux-2.6.31-rc3. Applies and works with linux-omap-2.6 commit 7c5cb7862d32cb344be7831d466535d5255e35ac as well. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-22 03:22:28 +00:00
config SND_SOC_CX20442
tristate
depends on TTY
ASoC: Add support for Conexant CX20442-11 voice modem codec This patch adds support for Conexant CX20442-11 voice modem codec, suitable for use by the ASoC board driver for Amstrad E3 (Delta) videophone. Related sound card driver will follow. This codec is an optional part of the Conexant SmartV three chip modem design. As such, documentation for its proprietary digital audio interface is not available. However, on Amstrad Delta board, thanks to Mark Underwood who created an initial, omap-alsa based sound driver a few years ago[1], the codec has been discovered to be accessible not only from the modem side, but also over the OMAP McBSP based CPU DAI. Thus, the driver can be used by any sound card that can access the codec DAI directly. The DAI configuration parameters (sample rate and format, number of channels) has been selected out empirically for best user experience. The codec analogue interface consists of two pairs of analogue I/O pins: speakerphone interface or telephone handset/headset interface. Furthermore, it seams to provide two operation modes for speakerphone I/O: standard and advanced, with automatic gain control and echo cancelation. Even if the codec control interface is unknown and not available, all those interfaces and modes can be selected over the modem chip using V.253 commands. The driver is able to issue necessary commands over a suitable hw_write function if provided by a sound card driver. Otherwise, the codec can be controlled over the modem from userspace while inactive. Even if nothig is known about the codec internal power management capabilities, DAPM widgets has been used to model the codec audio map. Automatically performed powering up/down of those virtual widgets results in corresponding V.253 commands being issued. Some driver features/oddities may be board specific, but I have no way to verify that with any board other than Amstrad Delta. [1] http://www.earth.li/pipermail/e3-hacking/2006-April/000481.html Created and tested against linux-2.6.31-rc3. Applies and works with linux-omap-2.6 commit 7c5cb7862d32cb344be7831d466535d5255e35ac as well. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-22 03:22:28 +00:00
ASoC: Add support for Conexant CX2072X CODEC Initial commit of the Conexant CX2072X CODEC driver. Some features are not present. The CX2072X is a ultra low power stereo audio codec supports I2S/TDM host interface with EQ, DRC features in playback mode. Featues of CX2072X codec: * Two 24 bits DACs and DACs. * Stereo Headphone AMP. * 2.8W per channel class-D output. * Integrated seven bands per channel EQ and DRC. * Fully integrated headset support with detect/switch. * Stereo digital microphone for array applications. * S/PDIF output. * Bi-directional GPIOs. * Support analog and digital PC Beeep. * One headset button support. * Supports a wide variety of host interfaces. -wide variety of I2S and similar bit-stream formats with word lengths of up to 24 bits. -TDM stream supports up to 4 channels. * AEC loopback support. Further fixes by tiwai: * Rebase to 5.2+ * Missing DAPM entry definitions * Missing power hooks * Fix uninitialized variable warning * Rewrite jack detection stuff to use set_jack callback * Plumbing jack detection code for Intel ASoC * Move clk management into runtime PM * Drop incorrect regcache usages * Drop untested stuff: OF table, EQ/DRC handling * Lots of code cleanups and minor refactoring The OF code was dropped due to the lack of testability. It should be easy to re-add once if someone can test it. v1->v2: No change v2->v3: Move register tables to appropriate place Remove some confusing codes Set snd_ctl_boolean_* helpers directly Fix EQ put callback Rename to "DAC1 Switch" from "DAC1 Mute Switch" Drop superfluous regmap calls at shutdown Avoid regmap_register_patch() Add missing register definitions Fix register access on big-endian machine Remove regcache messes v3->v4: Fix the wrong endianess conversion in reg write Minor code cleanups v4->v5: Move clk management to runtime PM Sparse warning fixes Some more code simplification Drop tricky regcache fiddling Apply mutex locks around possible racy sequences Move exported jack detection stuff into set_jack callback v5->v6: Drop buggy&untested EQ and DRC codes Lots of code reduction/cleanup Add more comments about platform-specific stuff Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=115531 Signed-off-by: Simon Ho <simon.ho@conexant.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-21 06:26:52 +00:00
config SND_SOC_CX2072X
tristate "Conexant CX2072X CODEC"
depends on I2C
help
Enable support for Conexant CX20721 and CX20723 codec chips.
config SND_SOC_JZ4740_CODEC
depends on MIPS || COMPILE_TEST
select REGMAP_MMIO
tristate "Ingenic JZ4740 internal CODEC"
help
Enable support for the internal CODEC found in the JZ4740 SoC
from Ingenic.
This driver can also be built as a module. If so, the module
will be called snd-soc-jz4740-codec.
config SND_SOC_JZ4725B_CODEC
depends on MIPS || COMPILE_TEST
select REGMAP
tristate "Ingenic JZ4725B internal CODEC"
help
Enable support for the internal CODEC found in the JZ4725B SoC
from Ingenic.
This driver can also be built as a module. If so, the module
will be called snd-soc-jz4725b-codec.
config SND_SOC_JZ4770_CODEC
depends on MIPS || COMPILE_TEST
select REGMAP
tristate "Ingenic JZ4770 internal CODEC"
help
Enable support for the internal CODEC found in the JZ4770 SoC
from Ingenic.
This driver can also be built as a module. If so, the module
will be called snd-soc-jz4770-codec.
config SND_SOC_L3
tristate
config SND_SOC_DA7210
tristate
config SND_SOC_DA7213
tristate "Dialog DA7213 CODEC"
depends on I2C
config SND_SOC_DA7218
tristate
config SND_SOC_DA7219
tristate
config SND_SOC_DA732X
tristate
config SND_SOC_DA9055
tristate
config SND_SOC_DMIC
tristate "Generic Digital Microphone CODEC"
depends on GPIOLIB
help
Enable support for the Generic Digital Microphone CODEC.
Select this if your sound card has DMICs.
config SND_SOC_HDMI_CODEC
tristate
select SND_PCM_ELD
select SND_PCM_IEC958
select HDMI
config SND_SOC_ES7134
tristate "Everest Semi ES7134 CODEC"
config SND_SOC_ES7241
tristate "Everest Semi ES7241 CODEC"
config SND_SOC_ES8316
tristate "Everest Semi ES8316 CODEC"
depends on I2C
config SND_SOC_ES8328
tristate
config SND_SOC_ES8328_I2C
tristate "Everest Semi ES8328 CODEC (I2C)"
depends on I2C
select SND_SOC_ES8328
config SND_SOC_ES8328_SPI
tristate "Everest Semi ES8328 CODEC (SPI)"
depends on SPI_MASTER
select SND_SOC_ES8328
config SND_SOC_GTM601
tristate 'GTM601 UMTS modem audio codec'
config SND_SOC_HDAC_HDMI
tristate
select SND_HDA_EXT_CORE
select SND_PCM_ELD
select HDMI
config SND_SOC_HDAC_HDA
tristate
select SND_HDA
config SND_SOC_ICS43432
tristate
config SND_SOC_INNO_RK3036
tristate "Inno codec driver for RK3036 SoC"
select REGMAP_MMIO
config SND_SOC_ISABELLE
tristate
config SND_SOC_LM49453
tristate
config SND_SOC_LOCHNAGAR_SC
tristate "Lochnagar Sound Card"
depends on MFD_LOCHNAGAR
help
This driver support the sound card functionality of the Cirrus
Logic Lochnagar audio development board.
config SND_SOC_MADERA
tristate
default y if SND_SOC_CS47L15=y
default y if SND_SOC_CS47L35=y
default y if SND_SOC_CS47L85=y
default y if SND_SOC_CS47L90=y
default y if SND_SOC_CS47L92=y
default m if SND_SOC_CS47L15=m
default m if SND_SOC_CS47L35=m
default m if SND_SOC_CS47L85=m
default m if SND_SOC_CS47L90=m
default m if SND_SOC_CS47L92=m
config SND_SOC_MAX98088
tristate "Maxim MAX98088/9 Low-Power, Stereo Audio Codec"
depends on I2C
config SND_SOC_MAX98090
tristate
config SND_SOC_MAX98095
tristate
config SND_SOC_MAX98357A
tristate "Maxim MAX98357A CODEC"
depends on GPIOLIB
config SND_SOC_MAX98371
tristate
ASoC: max98504: Add max98504 speaker amplifier driver This patch adds driver for the MAX98504 speaker amplifier. The MAX98504 is a high efficiency mono class D amplifier that features an integrated boost converter with voltage and current sensing ADCs for Dynamic Speaker Management. This driver does not include support for the I2S DAI, as we wouldn't be able to test such code in a hardware configuration where the amplifier has only wired the analogue input. Signed-off-by: Inha Song <ideal.song@samsung.com> [k.kozlowski: rebased on 4.1] Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> [s.nawrocki: removed unused macro definitions, rewrote regulator supply related parts, rewrote regmap configuration code, added support for speaker enable and global chip enable through DAPM, rewritten as component driver, added PDM DAI definition and TDM callbacks for PDM channels configuration] Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> -- Changes since v2: - added parsing of the VBAT brownout DT properties, - removed MAX98504_REG_SPEAKER_SOURCE_SELECT register initialization, - removed unused macro definitions. Changes since v1: - none. Changes since initial version: - added regulator supply handling, - added DAPM widges for speaker source selection, - added PDM DAI definition and TDM callbacks for setting up active PDM Tx channels and I/V sense ADC data mapping, - removed all optional DT properties, added regulator supply properties in the DT binding. Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-29 11:26:37 +00:00
config SND_SOC_MAX98504
tristate "Maxim MAX98504 speaker amplifier"
depends on I2C
config SND_SOC_MAX9867
tristate "Maxim MAX9867 CODEC"
depends on I2C
config SND_SOC_MAX98925
tristate
config SND_SOC_MAX98926
tristate
config SND_SOC_MAX98927
tristate "Maxim Integrated MAX98927 Speaker Amplifier"
depends on I2C
config SND_SOC_MAX98373
tristate "Maxim Integrated MAX98373 Speaker Amplifier"
depends on I2C
config SND_SOC_MAX9850
tristate
config SND_SOC_MAX9860
tristate "Maxim MAX9860 Mono Audio Voice Codec"
depends on I2C
select REGMAP_I2C
config SND_SOC_MSM8916_WCD_ANALOG
tristate "Qualcomm MSM8916 WCD Analog Codec"
depends on SPMI || COMPILE_TEST
config SND_SOC_MSM8916_WCD_DIGITAL
tristate "Qualcomm MSM8916 WCD DIGITAL Codec"
select REGMAP_MMIO
config SND_SOC_PCM1681
tristate "Texas Instruments PCM1681 CODEC"
depends on I2C
config SND_SOC_PCM1789
tristate
config SND_SOC_PCM1789_I2C
tristate "Texas Instruments PCM1789 CODEC (I2C)"
depends on I2C
select SND_SOC_PCM1789
help
Enable support for Texas Instruments PCM1789 CODEC.
Select this if your PCM1789 is connected via an I2C bus.
config SND_SOC_PCM179X
tristate
config SND_SOC_PCM179X_I2C
tristate "Texas Instruments PCM179X CODEC (I2C)"
depends on I2C
select SND_SOC_PCM179X
help
Enable support for Texas Instruments PCM179x CODEC.
Select this if your PCM179x is connected via an I2C bus.
config SND_SOC_PCM179X_SPI
tristate "Texas Instruments PCM179X CODEC (SPI)"
depends on SPI_MASTER
select SND_SOC_PCM179X
help
Enable support for Texas Instruments PCM179x CODEC.
Select this if your PCM179x is connected via an SPI bus.
config SND_SOC_PCM186X
tristate
config SND_SOC_PCM186X_I2C
tristate "Texas Instruments PCM186x CODECs - I2C"
depends on I2C
select SND_SOC_PCM186X
select REGMAP_I2C
config SND_SOC_PCM186X_SPI
tristate "Texas Instruments PCM186x CODECs - SPI"
depends on SPI_MASTER
select SND_SOC_PCM186X
select REGMAP_SPI
config SND_SOC_PCM3008
tristate
config SND_SOC_PCM3060
tristate
config SND_SOC_PCM3060_I2C
tristate "Texas Instruments PCM3060 CODEC - I2C"
depends on I2C
select SND_SOC_PCM3060
select REGMAP_I2C
config SND_SOC_PCM3060_SPI
tristate "Texas Instruments PCM3060 CODEC - SPI"
depends on SPI_MASTER
select SND_SOC_PCM3060
select REGMAP_SPI
config SND_SOC_PCM3168A
tristate
config SND_SOC_PCM3168A_I2C
tristate "Texas Instruments PCM3168A CODEC - I2C"
depends on I2C
select SND_SOC_PCM3168A
select REGMAP_I2C
config SND_SOC_PCM3168A_SPI
tristate "Texas Instruments PCM3168A CODEC - SPI"
depends on SPI_MASTER
select SND_SOC_PCM3168A
select REGMAP_SPI
config SND_SOC_PCM5102A
tristate
config SND_SOC_PCM512x
tristate
config SND_SOC_PCM512x_I2C
tristate "Texas Instruments PCM512x CODECs - I2C"
depends on I2C
select SND_SOC_PCM512x
select REGMAP_I2C
config SND_SOC_PCM512x_SPI
tristate "Texas Instruments PCM512x CODECs - SPI"
depends on SPI_MASTER
select SND_SOC_PCM512x
select REGMAP_SPI
config SND_SOC_RK3328
tristate "Rockchip RK3328 audio CODEC"
select REGMAP_MMIO
config SND_SOC_RL6231
tristate
default y if SND_SOC_RT5514=y
default y if SND_SOC_RT5616=y
default y if SND_SOC_RT5640=y
default y if SND_SOC_RT5645=y
default y if SND_SOC_RT5651=y
default y if SND_SOC_RT5659=y
default y if SND_SOC_RT5660=y
default y if SND_SOC_RT5663=y
default y if SND_SOC_RT5665=y
default y if SND_SOC_RT5668=y
default y if SND_SOC_RT5670=y
default y if SND_SOC_RT5677=y
default y if SND_SOC_RT5682=y
default y if SND_SOC_RT1011=y
default y if SND_SOC_RT1015=y
default y if SND_SOC_RT1305=y
default y if SND_SOC_RT1308=y
default m if SND_SOC_RT5514=m
default m if SND_SOC_RT5616=m
default m if SND_SOC_RT5640=m
default m if SND_SOC_RT5645=m
default m if SND_SOC_RT5651=m
default m if SND_SOC_RT5659=m
default m if SND_SOC_RT5660=m
default m if SND_SOC_RT5663=m
default m if SND_SOC_RT5665=m
default m if SND_SOC_RT5668=m
default m if SND_SOC_RT5670=m
default m if SND_SOC_RT5677=m
default m if SND_SOC_RT5682=m
default m if SND_SOC_RT1011=m
default m if SND_SOC_RT1015=m
default m if SND_SOC_RT1305=m
default m if SND_SOC_RT1308=m
config SND_SOC_RL6347A
tristate
default y if SND_SOC_RT274=y
default y if SND_SOC_RT286=y
default y if SND_SOC_RT298=y
default m if SND_SOC_RT274=m
default m if SND_SOC_RT286=m
default m if SND_SOC_RT298=m
config SND_SOC_RT274
tristate
depends on I2C
config SND_SOC_RT286
tristate
depends on I2C
config SND_SOC_RT298
tristate
depends on I2C
config SND_SOC_RT1011
tristate
config SND_SOC_RT1015
tristate
config SND_SOC_RT1305
tristate
config SND_SOC_RT1308
tristate
config SND_SOC_RT1308_SDW
tristate "Realtek RT1308 Codec - SDW"
depends on SOUNDWIRE
select REGMAP_SOUNDWIRE
config SND_SOC_RT5514
tristate
config SND_SOC_RT5514_SPI
tristate
config SND_SOC_RT5514_SPI_BUILTIN
bool # force RT5514_SPI to be built-in to avoid link errors
default SND_SOC_RT5514=y && SND_SOC_RT5514_SPI=m
config SND_SOC_RT5616
tristate "Realtek RT5616 CODEC"
depends on I2C
config SND_SOC_RT5631
tristate "Realtek ALC5631/RT5631 CODEC"
depends on I2C
config SND_SOC_RT5640
tristate
config SND_SOC_RT5645
tristate
config SND_SOC_RT5651
tristate
config SND_SOC_RT5659
tristate
config SND_SOC_RT5660
tristate
config SND_SOC_RT5663
tristate
config SND_SOC_RT5665
tristate
config SND_SOC_RT5668
tristate
config SND_SOC_RT5670
tristate
config SND_SOC_RT5677
tristate
select REGMAP_I2C
select REGMAP_IRQ
config SND_SOC_RT5677_SPI
tristate
default SND_SOC_RT5677 && SPI
config SND_SOC_RT5682
tristate
config SND_SOC_RT700
tristate
config SND_SOC_RT700_SDW
tristate "Realtek RT700 Codec - SDW"
depends on SOUNDWIRE
select SND_SOC_RT700
select REGMAP_SOUNDWIRE
config SND_SOC_RT711
tristate
config SND_SOC_RT711_SDW
tristate "Realtek RT711 Codec - SDW"
depends on SOUNDWIRE
select SND_SOC_RT711
select REGMAP_SOUNDWIRE
config SND_SOC_RT715
tristate
config SND_SOC_RT715_SDW
tristate "Realtek RT715 Codec - SDW"
depends on SOUNDWIRE
select SND_SOC_RT715
select REGMAP_SOUNDWIRE
#Freescale sgtl5000 codec
config SND_SOC_SGTL5000
tristate "Freescale SGTL5000 CODEC"
depends on I2C
config SND_SOC_SI476X
tristate
config SND_SOC_SIGMADSP
tristate
select CRC32
config SND_SOC_SIGMADSP_I2C
tristate
select SND_SOC_SIGMADSP
config SND_SOC_SIGMADSP_REGMAP
tristate
select SND_SOC_SIGMADSP
config SND_SOC_SIMPLE_AMPLIFIER
tristate "Simple Audio Amplifier"
select GPIOLIB
config SND_SOC_SIRF_AUDIO_CODEC
tristate "SiRF SoC internal audio codec"
select REGMAP_MMIO
config SND_SOC_SPDIF
tristate "S/PDIF CODEC"
config SND_SOC_SSM2305
tristate "Analog Devices SSM2305 Class-D Amplifier"
help
Enable support for Analog Devices SSM2305 filterless
high-efficiency mono Class-D audio power amplifiers.
config SND_SOC_SSM2518
tristate
config SND_SOC_SSM2602
tristate
config SND_SOC_SSM2602_SPI
tristate "Analog Devices SSM2602 CODEC - SPI"
depends on SPI_MASTER
select SND_SOC_SSM2602
select REGMAP_SPI
config SND_SOC_SSM2602_I2C
tristate "Analog Devices SSM2602 CODEC - I2C"
depends on I2C
select SND_SOC_SSM2602
select REGMAP_I2C
config SND_SOC_SSM4567
tristate "Analog Devices ssm4567 amplifier driver support"
depends on I2C
config SND_SOC_STA32X
tristate "STA326, STA328 and STA329 speaker amplifier"
depends on I2C
select REGMAP_I2C
config SND_SOC_STA350
tristate "STA350 speaker amplifier"
depends on I2C
config SND_SOC_STA529
tristate
config SND_SOC_STAC9766
tristate
config SND_SOC_STI_SAS
tristate "codec Audio support for STI SAS codec"
config SND_SOC_TAS2552
tristate "Texas Instruments TAS2552 Mono Audio amplifier"
depends on I2C
config SND_SOC_TAS2562
tristate "Texas Instruments TAS2562 Mono Audio amplifier"
depends on I2C
config SND_SOC_TAS2770
tristate "Texas Instruments TAS2770 speaker amplifier"
depends on I2C
config SND_SOC_TAS5086
tristate "Texas Instruments TAS5086 speaker amplifier"
depends on I2C
config SND_SOC_TAS571X
tristate "Texas Instruments TAS571x power amplifiers"
depends on I2C
help
Enable support for Texas Instruments TAS5707, TAS5711, TAS5717,
TAS5719 and TAS5721 power amplifiers
config SND_SOC_TAS5720
tristate "Texas Instruments TAS5720 Mono Audio amplifier"
depends on I2C
help
Enable support for Texas Instruments TAS5720L/M high-efficiency mono
Class-D audio power amplifiers.
config SND_SOC_TAS6424
tristate "Texas Instruments TAS6424 Quad-Channel Audio amplifier"
depends on I2C
help
Enable support for Texas Instruments TAS6424 high-efficiency
digital input quad-channel Class-D audio power amplifiers.
config SND_SOC_TDA7419
tristate "ST TDA7419 audio processor"
depends on I2C
select REGMAP_I2C
config SND_SOC_TFA9879
tristate "NXP Semiconductors TFA9879 amplifier"
depends on I2C
config SND_SOC_TLV320AIC23
tristate
config SND_SOC_TLV320AIC23_I2C
tristate "Texas Instruments TLV320AIC23 audio CODEC - I2C"
depends on I2C
select SND_SOC_TLV320AIC23
config SND_SOC_TLV320AIC23_SPI
tristate "Texas Instruments TLV320AIC23 audio CODEC - SPI"
depends on SPI_MASTER
select SND_SOC_TLV320AIC23
config SND_SOC_TLV320AIC26
tristate
depends on SPI
config SND_SOC_TLV320AIC31XX
tristate "Texas Instruments TLV320AIC31xx CODECs"
depends on I2C
select REGMAP_I2C
config SND_SOC_TLV320AIC32X4
tristate
depends on COMMON_CLK
config SND_SOC_TLV320AIC32X4_I2C
tristate "Texas Instruments TLV320AIC32x4 audio CODECs - I2C"
depends on I2C
depends on COMMON_CLK
select SND_SOC_TLV320AIC32X4
config SND_SOC_TLV320AIC32X4_SPI
tristate "Texas Instruments TLV320AIC32x4 audio CODECs - SPI"
depends on SPI_MASTER
depends on COMMON_CLK
select SND_SOC_TLV320AIC32X4
config SND_SOC_TLV320AIC3X
tristate "Texas Instruments TLV320AIC3x CODECs"
depends on I2C
config SND_SOC_TLV320DAC33
tristate
config SND_SOC_TS3A227E
tristate "TI Headset/Mic detect and keypress chip"
depends on I2C
config SND_SOC_TSCS42XX
tristate "Tempo Semiconductor TSCS42xx CODEC"
depends on I2C
select REGMAP_I2C
help
Add support for Tempo Semiconductor's TSCS42xx audio CODEC.
config SND_SOC_TSCS454
tristate "Tempo Semiconductor TSCS454 CODEC"
depends on I2C
select REGMAP_I2C
help
Add support for Tempo Semiconductor's TSCS454 audio CODEC.
config SND_SOC_TWL4030
select MFD_TWL4030_AUDIO
tristate
config SND_SOC_TWL6040
tristate
config SND_SOC_UDA1334
tristate "NXP UDA1334 DAC"
depends on GPIOLIB
help
The UDA1334 is an NXP audio codec, supports the I2S-bus data format
and has basic features such as de-emphasis (at 44.1 kHz sampling
rate) and mute.
config SND_SOC_UDA134X
tristate
config SND_SOC_UDA1380
tristate
depends on I2C
config SND_SOC_WCD9335
tristate "WCD9335 Codec"
depends on SLIMBUS
select REGMAP_SLIMBUS
select REGMAP_IRQ
help
The WCD9335 is a standalone Hi-Fi audio CODEC IC, supports
Qualcomm Technologies, Inc. (QTI) multimedia solutions,
including the MSM8996, MSM8976, and MSM8956 chipsets.
config SND_SOC_WCD934X
tristate "WCD9340/WCD9341 Codec"
depends on MFD_WCD934X
help
The WCD9340/9341 is a audio codec IC Integrated in
Qualcomm SoCs like SDM845.
config SND_SOC_WL1273
tristate
config SND_SOC_WM0010
tristate
config SND_SOC_WM1250_EV1
tristate
config SND_SOC_WM2000
tristate
config SND_SOC_WM2200
tristate
config SND_SOC_WM5100
tristate
config SND_SOC_WM5102
tristate
config SND_SOC_WM5110
tristate
config SND_SOC_WM8350
tristate
config SND_SOC_WM8400
tristate
config SND_SOC_WM8510
tristate "Wolfson Microelectronics WM8510 CODEC"
depends on SND_SOC_I2C_AND_SPI
config SND_SOC_WM8523
tristate "Wolfson Microelectronics WM8523 DAC"
depends on I2C
config SND_SOC_WM8524
tristate "Wolfson Microelectronics WM8524 DAC"
depends on GPIOLIB
config SND_SOC_WM8580
tristate "Wolfson Microelectronics WM8580 and WM8581 CODECs"
depends on I2C
config SND_SOC_WM8711
tristate "Wolfson Microelectronics WM8711 CODEC"
depends on SND_SOC_I2C_AND_SPI
config SND_SOC_WM8727
tristate
config SND_SOC_WM8728
tristate "Wolfson Microelectronics WM8728 DAC"
depends on SND_SOC_I2C_AND_SPI
config SND_SOC_WM8731
tristate "Wolfson Microelectronics WM8731 CODEC"
depends on SND_SOC_I2C_AND_SPI
config SND_SOC_WM8737
tristate "Wolfson Microelectronics WM8737 ADC"
depends on SND_SOC_I2C_AND_SPI
config SND_SOC_WM8741
tristate "Wolfson Microelectronics WM8737 DAC"
depends on SND_SOC_I2C_AND_SPI
config SND_SOC_WM8750
tristate "Wolfson Microelectronics WM8750 CODEC"
depends on SND_SOC_I2C_AND_SPI
config SND_SOC_WM8753
tristate "Wolfson Microelectronics WM8753 CODEC"
depends on SND_SOC_I2C_AND_SPI
config SND_SOC_WM8770
tristate "Wolfson Microelectronics WM8770 CODEC"
depends on SPI_MASTER
config SND_SOC_WM8776
tristate "Wolfson Microelectronics WM8776 CODEC"
depends on SND_SOC_I2C_AND_SPI
config SND_SOC_WM8782
tristate "Wolfson Microelectronics WM8782 ADC"
config SND_SOC_WM8804
tristate
config SND_SOC_WM8804_I2C
tristate "Wolfson Microelectronics WM8804 S/PDIF transceiver I2C"
depends on I2C
select SND_SOC_WM8804
select REGMAP_I2C
config SND_SOC_WM8804_SPI
tristate "Wolfson Microelectronics WM8804 S/PDIF transceiver SPI"
depends on SPI_MASTER
select SND_SOC_WM8804
select REGMAP_SPI
config SND_SOC_WM8900
tristate
config SND_SOC_WM8903
tristate "Wolfson Microelectronics WM8903 CODEC"
depends on I2C
config SND_SOC_WM8904
tristate "Wolfson Microelectronics WM8904 CODEC"
depends on I2C
config SND_SOC_WM8940
tristate
config SND_SOC_WM8955
tristate
config SND_SOC_WM8960
tristate "Wolfson Microelectronics WM8960 CODEC"
depends on I2C
config SND_SOC_WM8961
tristate
config SND_SOC_WM8962
tristate "Wolfson Microelectronics WM8962 CODEC"
depends on I2C && INPUT
config SND_SOC_WM8971
tristate
config SND_SOC_WM8974
tristate "Wolfson Microelectronics WM8974 codec"
depends on I2C
config SND_SOC_WM8978
tristate "Wolfson Microelectronics WM8978 codec"
depends on I2C
config SND_SOC_WM8983
tristate
config SND_SOC_WM8985
tristate "Wolfson Microelectronics WM8985 and WM8758 codec driver"
depends on SND_SOC_I2C_AND_SPI
config SND_SOC_WM8988
tristate
config SND_SOC_WM8990
tristate
config SND_SOC_WM8991
tristate
config SND_SOC_WM8993
tristate
config SND_SOC_WM8994
tristate
config SND_SOC_WM8995
tristate
config SND_SOC_WM8996
tristate
config SND_SOC_WM8997
tristate
config SND_SOC_WM8998
tristate
config SND_SOC_WM9081
tristate
depends on I2C
config SND_SOC_WM9090
tristate
config SND_SOC_WM9705
tristate
select REGMAP_AC97
select AC97_BUS_COMPAT if AC97_BUS_NEW
config SND_SOC_WM9712
tristate
select REGMAP_AC97
select AC97_BUS_COMPAT if AC97_BUS_NEW
config SND_SOC_WM9713
tristate
select REGMAP_AC97
select AC97_BUS_COMPAT if AC97_BUS_NEW
config SND_SOC_WSA881X
tristate "WSA881X Codec"
depends on SOUNDWIRE
select REGMAP_SOUNDWIRE
tristate
help
This enables support for Qualcomm WSA8810/WSA8815 Class-D
Smart Speaker Amplifier.
config SND_SOC_ZX_AUD96P22
tristate "ZTE ZX AUD96P22 CODEC"
depends on I2C
select REGMAP_I2C
# Amp
config SND_SOC_LM4857
tristate
config SND_SOC_MAX9759
tristate "Maxim MAX9759 speaker Amplifier"
select GPIOLIB
config SND_SOC_MAX9768
tristate
config SND_SOC_MAX9877
tristate
config SND_SOC_MC13783
tristate
config SND_SOC_ML26124
tristate
config SND_SOC_MT6351
tristate "MediaTek MT6351 Codec"
config SND_SOC_MT6358
tristate "MediaTek MT6358 Codec"
help
Enable support for the platform which uses MT6358 as
external codec device.
config SND_SOC_MT6660
tristate "Mediatek MT6660 Speaker Amplifier"
depends on I2C
help
MediaTek MT6660 is a smart power amplifier which contain
speaker protection, multi-band DRC, equalizer functions.
Select N if you don't have MT6660 on board.
Select M to build this as module.
config SND_SOC_NAU8540
tristate "Nuvoton Technology Corporation NAU85L40 CODEC"
depends on I2C
config SND_SOC_NAU8810
tristate "Nuvoton Technology Corporation NAU88C10 CODEC"
depends on I2C
config SND_SOC_NAU8822
tristate "Nuvoton Technology Corporation NAU88C22 CODEC"
depends on I2C
config SND_SOC_NAU8824
tristate "Nuvoton Technology Corporation NAU88L24 CODEC"
depends on I2C
config SND_SOC_NAU8825
tristate
config SND_SOC_TPA6130A2
tristate "Texas Instruments TPA6130A2 headphone amplifier"
depends on I2C
endmenu