linux/block/blk-mq.c

3198 lines
78 KiB
C
Raw Normal View History

/*
* Block multiqueue core code
*
* Copyright (C) 2013-2014 Jens Axboe
* Copyright (C) 2013-2014 Christoph Hellwig
*/
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/backing-dev.h>
#include <linux/bio.h>
#include <linux/blkdev.h>
#include <linux/kmemleak.h>
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
#include <linux/mm.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/workqueue.h>
#include <linux/smp.h>
#include <linux/llist.h>
#include <linux/list_sort.h>
#include <linux/cpu.h>
#include <linux/cache.h>
#include <linux/sched/sysctl.h>
#include <linux/sched/topology.h>
#include <linux/sched/signal.h>
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
#include <linux/delay.h>
#include <linux/crash_dump.h>
#include <linux/prefetch.h>
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
#include <trace/events/block.h>
#include <linux/blk-mq.h>
#include "blk.h"
#include "blk-mq.h"
#include "blk-mq-debugfs.h"
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
#include "blk-mq-tag.h"
#include "blk-stat.h"
block: hook up writeback throttling Enable throttling of buffered writeback to make it a lot more smooth, and has way less impact on other system activity. Background writeback should be, by definition, background activity. The fact that we flush huge bundles of it at the time means that it potentially has heavy impacts on foreground workloads, which isn't ideal. We can't easily limit the sizes of writes that we do, since that would impact file system layout in the presence of delayed allocation. So just throttle back buffered writeback, unless someone is waiting for it. The algorithm for when to throttle takes its inspiration in the CoDel networking scheduling algorithm. Like CoDel, blk-wb monitors the minimum latencies of requests over a window of time. In that window of time, if the minimum latency of any request exceeds a given target, then a scale count is incremented and the queue depth is shrunk. The next monitoring window is shrunk accordingly. Unlike CoDel, if we hit a window that exhibits good behavior, then we simply increment the scale count and re-calculate the limits for that scale value. This prevents us from oscillating between a close-to-ideal value and max all the time, instead remaining in the windows where we get good behavior. Unlike CoDel, blk-wb allows the scale count to to negative. This happens if we primarily have writes going on. Unlike positive scale counts, this doesn't change the size of the monitoring window. When the heavy writers finish, blk-bw quickly snaps back to it's stable state of a zero scale count. The patch registers a sysfs entry, 'wb_lat_usec'. This sets the latency target to me met. It defaults to 2 msec for non-rotational storage, and 75 msec for rotational storage. Setting this value to '0' disables blk-wb. Generally, a user would not have to touch this setting. We don't enable WBT on devices that are managed with CFQ, and have a non-root block cgroup attached. If we have a proportional share setup on this particular disk, then the wbt throttling will interfere with that. We don't have a strong need for wbt for that case, since we will rely on CFQ doing that for us. Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-09 19:38:14 +00:00
#include "blk-wbt.h"
#include "blk-mq-sched.h"
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
static bool blk_mq_poll(struct request_queue *q, blk_qc_t cookie);
blk-stat: convert to callback-based statistics reporting Currently, statistics are gathered in ~0.13s windows, and users grab the statistics whenever they need them. This is not ideal for both in-tree users: 1. Writeback throttling wants its own dynamically sized window of statistics. Since the blk-stats statistics are reset after every window and the wbt windows don't line up with the blk-stats windows, wbt doesn't see every I/O. 2. Polling currently grabs the statistics on every I/O. Again, depending on how the window lines up, we may miss some I/Os. It's also unnecessary overhead to get the statistics on every I/O; the hybrid polling heuristic would be just as happy with the statistics from the previous full window. This reworks the blk-stats infrastructure to be callback-based: users register a callback that they want called at a given time with all of the statistics from the window during which the callback was active. Users can dynamically bucketize the statistics. wbt and polling both currently use read vs. write, but polling can be extended to further subdivide based on request size. The callbacks are kept on an RCU list, and each callback has percpu stats buffers. There will only be a few users, so the overhead on the I/O completion side is low. The stats flushing is also simplified considerably: since the timer function is responsible for clearing the statistics, we don't have to worry about stale statistics. wbt is a trivial conversion. After the conversion, the windowing problem mentioned above is fixed. For polling, we register an extra callback that caches the previous window's statistics in the struct request_queue for the hybrid polling heuristic to use. Since we no longer have a single stats buffer for the request queue, this also removes the sysfs and debugfs stats entries. To replace those, we add a debugfs entry for the poll statistics. Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-03-21 15:56:08 +00:00
static void blk_mq_poll_stats_start(struct request_queue *q);
static void blk_mq_poll_stats_fn(struct blk_stat_callback *cb);
static int blk_mq_poll_stats_bkt(const struct request *rq)
{
int ddir, bytes, bucket;
ddir = rq_data_dir(rq);
bytes = blk_rq_bytes(rq);
bucket = ddir + 2*(ilog2(bytes) - 9);
if (bucket < 0)
return -1;
else if (bucket >= BLK_MQ_POLL_STATS_BKTS)
return ddir + BLK_MQ_POLL_STATS_BKTS - 2;
return bucket;
}
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
/*
* Check if any of the ctx's have pending work in this hardware queue
*/
static bool blk_mq_hctx_has_pending(struct blk_mq_hw_ctx *hctx)
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
{
return !list_empty_careful(&hctx->dispatch) ||
sbitmap_any_bit_set(&hctx->ctx_map) ||
blk_mq_sched_has_work(hctx);
}
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
/*
* Mark this ctx as having pending work in this hardware queue
*/
static void blk_mq_hctx_mark_pending(struct blk_mq_hw_ctx *hctx,
struct blk_mq_ctx *ctx)
{
if (!sbitmap_test_bit(&hctx->ctx_map, ctx->index_hw))
sbitmap_set_bit(&hctx->ctx_map, ctx->index_hw);
}
static void blk_mq_hctx_clear_pending(struct blk_mq_hw_ctx *hctx,
struct blk_mq_ctx *ctx)
{
sbitmap_clear_bit(&hctx->ctx_map, ctx->index_hw);
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
}
struct mq_inflight {
struct hd_struct *part;
unsigned int *inflight;
};
static void blk_mq_check_inflight(struct blk_mq_hw_ctx *hctx,
struct request *rq, void *priv,
bool reserved)
{
struct mq_inflight *mi = priv;
/*
* index[0] counts the specific partition that was asked for. index[1]
* counts the ones that are active on the whole device, so increment
* that if mi->part is indeed a partition, and not a whole device.
*/
if (rq->part == mi->part)
mi->inflight[0]++;
if (mi->part->partno)
mi->inflight[1]++;
}
void blk_mq_in_flight(struct request_queue *q, struct hd_struct *part,
unsigned int inflight[2])
{
struct mq_inflight mi = { .part = part, .inflight = inflight, };
inflight[0] = inflight[1] = 0;
blk_mq_queue_tag_busy_iter(q, blk_mq_check_inflight, &mi);
}
static void blk_mq_check_inflight_rw(struct blk_mq_hw_ctx *hctx,
struct request *rq, void *priv,
bool reserved)
{
struct mq_inflight *mi = priv;
if (rq->part == mi->part)
mi->inflight[rq_data_dir(rq)]++;
}
void blk_mq_in_flight_rw(struct request_queue *q, struct hd_struct *part,
unsigned int inflight[2])
{
struct mq_inflight mi = { .part = part, .inflight = inflight, };
inflight[0] = inflight[1] = 0;
blk_mq_queue_tag_busy_iter(q, blk_mq_check_inflight_rw, &mi);
}
void blk_freeze_queue_start(struct request_queue *q)
{
int freeze_depth;
freeze_depth = atomic_inc_return(&q->mq_freeze_depth);
if (freeze_depth == 1) {
block: generic request_queue reference counting Allow pmem, and other synchronous/bio-based block drivers, to fallback on a per-cpu reference count managed by the core for tracking queue live/dead state. The existing per-cpu reference count for the blk_mq case is promoted to be used in all block i/o scenarios. This involves initializing it by default, waiting for it to drop to zero at exit, and holding a live reference over the invocation of q->make_request_fn() in generic_make_request(). The blk_mq code continues to take its own reference per blk_mq request and retains the ability to freeze the queue, but the check that the queue is frozen is moved to generic_make_request(). This fixes crash signatures like the following: BUG: unable to handle kernel paging request at ffff880140000000 [..] Call Trace: [<ffffffff8145e8bf>] ? copy_user_handle_tail+0x5f/0x70 [<ffffffffa004e1e0>] pmem_do_bvec.isra.11+0x70/0xf0 [nd_pmem] [<ffffffffa004e331>] pmem_make_request+0xd1/0x200 [nd_pmem] [<ffffffff811c3162>] ? mempool_alloc+0x72/0x1a0 [<ffffffff8141f8b6>] generic_make_request+0xd6/0x110 [<ffffffff8141f966>] submit_bio+0x76/0x170 [<ffffffff81286dff>] submit_bh_wbc+0x12f/0x160 [<ffffffff81286e62>] submit_bh+0x12/0x20 [<ffffffff813395bd>] jbd2_write_superblock+0x8d/0x170 [<ffffffff8133974d>] jbd2_mark_journal_empty+0x5d/0x90 [<ffffffff813399cb>] jbd2_journal_destroy+0x24b/0x270 [<ffffffff810bc4ca>] ? put_pwq_unlocked+0x2a/0x30 [<ffffffff810bc6f5>] ? destroy_workqueue+0x225/0x250 [<ffffffff81303494>] ext4_put_super+0x64/0x360 [<ffffffff8124ab1a>] generic_shutdown_super+0x6a/0xf0 Cc: Jens Axboe <axboe@kernel.dk> Cc: Keith Busch <keith.busch@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Suggested-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Tested-by: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-10-21 17:20:12 +00:00
percpu_ref_kill(&q->q_usage_counter);
if (q->mq_ops)
blk_mq_run_hw_queues(q, false);
}
}
EXPORT_SYMBOL_GPL(blk_freeze_queue_start);
void blk_mq_freeze_queue_wait(struct request_queue *q)
{
block: generic request_queue reference counting Allow pmem, and other synchronous/bio-based block drivers, to fallback on a per-cpu reference count managed by the core for tracking queue live/dead state. The existing per-cpu reference count for the blk_mq case is promoted to be used in all block i/o scenarios. This involves initializing it by default, waiting for it to drop to zero at exit, and holding a live reference over the invocation of q->make_request_fn() in generic_make_request(). The blk_mq code continues to take its own reference per blk_mq request and retains the ability to freeze the queue, but the check that the queue is frozen is moved to generic_make_request(). This fixes crash signatures like the following: BUG: unable to handle kernel paging request at ffff880140000000 [..] Call Trace: [<ffffffff8145e8bf>] ? copy_user_handle_tail+0x5f/0x70 [<ffffffffa004e1e0>] pmem_do_bvec.isra.11+0x70/0xf0 [nd_pmem] [<ffffffffa004e331>] pmem_make_request+0xd1/0x200 [nd_pmem] [<ffffffff811c3162>] ? mempool_alloc+0x72/0x1a0 [<ffffffff8141f8b6>] generic_make_request+0xd6/0x110 [<ffffffff8141f966>] submit_bio+0x76/0x170 [<ffffffff81286dff>] submit_bh_wbc+0x12f/0x160 [<ffffffff81286e62>] submit_bh+0x12/0x20 [<ffffffff813395bd>] jbd2_write_superblock+0x8d/0x170 [<ffffffff8133974d>] jbd2_mark_journal_empty+0x5d/0x90 [<ffffffff813399cb>] jbd2_journal_destroy+0x24b/0x270 [<ffffffff810bc4ca>] ? put_pwq_unlocked+0x2a/0x30 [<ffffffff810bc6f5>] ? destroy_workqueue+0x225/0x250 [<ffffffff81303494>] ext4_put_super+0x64/0x360 [<ffffffff8124ab1a>] generic_shutdown_super+0x6a/0xf0 Cc: Jens Axboe <axboe@kernel.dk> Cc: Keith Busch <keith.busch@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Suggested-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Tested-by: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-10-21 17:20:12 +00:00
wait_event(q->mq_freeze_wq, percpu_ref_is_zero(&q->q_usage_counter));
}
EXPORT_SYMBOL_GPL(blk_mq_freeze_queue_wait);
int blk_mq_freeze_queue_wait_timeout(struct request_queue *q,
unsigned long timeout)
{
return wait_event_timeout(q->mq_freeze_wq,
percpu_ref_is_zero(&q->q_usage_counter),
timeout);
}
EXPORT_SYMBOL_GPL(blk_mq_freeze_queue_wait_timeout);
/*
* Guarantee no request is in use, so we can change any data structure of
* the queue afterward.
*/
block: generic request_queue reference counting Allow pmem, and other synchronous/bio-based block drivers, to fallback on a per-cpu reference count managed by the core for tracking queue live/dead state. The existing per-cpu reference count for the blk_mq case is promoted to be used in all block i/o scenarios. This involves initializing it by default, waiting for it to drop to zero at exit, and holding a live reference over the invocation of q->make_request_fn() in generic_make_request(). The blk_mq code continues to take its own reference per blk_mq request and retains the ability to freeze the queue, but the check that the queue is frozen is moved to generic_make_request(). This fixes crash signatures like the following: BUG: unable to handle kernel paging request at ffff880140000000 [..] Call Trace: [<ffffffff8145e8bf>] ? copy_user_handle_tail+0x5f/0x70 [<ffffffffa004e1e0>] pmem_do_bvec.isra.11+0x70/0xf0 [nd_pmem] [<ffffffffa004e331>] pmem_make_request+0xd1/0x200 [nd_pmem] [<ffffffff811c3162>] ? mempool_alloc+0x72/0x1a0 [<ffffffff8141f8b6>] generic_make_request+0xd6/0x110 [<ffffffff8141f966>] submit_bio+0x76/0x170 [<ffffffff81286dff>] submit_bh_wbc+0x12f/0x160 [<ffffffff81286e62>] submit_bh+0x12/0x20 [<ffffffff813395bd>] jbd2_write_superblock+0x8d/0x170 [<ffffffff8133974d>] jbd2_mark_journal_empty+0x5d/0x90 [<ffffffff813399cb>] jbd2_journal_destroy+0x24b/0x270 [<ffffffff810bc4ca>] ? put_pwq_unlocked+0x2a/0x30 [<ffffffff810bc6f5>] ? destroy_workqueue+0x225/0x250 [<ffffffff81303494>] ext4_put_super+0x64/0x360 [<ffffffff8124ab1a>] generic_shutdown_super+0x6a/0xf0 Cc: Jens Axboe <axboe@kernel.dk> Cc: Keith Busch <keith.busch@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Suggested-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Tested-by: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-10-21 17:20:12 +00:00
void blk_freeze_queue(struct request_queue *q)
{
block: generic request_queue reference counting Allow pmem, and other synchronous/bio-based block drivers, to fallback on a per-cpu reference count managed by the core for tracking queue live/dead state. The existing per-cpu reference count for the blk_mq case is promoted to be used in all block i/o scenarios. This involves initializing it by default, waiting for it to drop to zero at exit, and holding a live reference over the invocation of q->make_request_fn() in generic_make_request(). The blk_mq code continues to take its own reference per blk_mq request and retains the ability to freeze the queue, but the check that the queue is frozen is moved to generic_make_request(). This fixes crash signatures like the following: BUG: unable to handle kernel paging request at ffff880140000000 [..] Call Trace: [<ffffffff8145e8bf>] ? copy_user_handle_tail+0x5f/0x70 [<ffffffffa004e1e0>] pmem_do_bvec.isra.11+0x70/0xf0 [nd_pmem] [<ffffffffa004e331>] pmem_make_request+0xd1/0x200 [nd_pmem] [<ffffffff811c3162>] ? mempool_alloc+0x72/0x1a0 [<ffffffff8141f8b6>] generic_make_request+0xd6/0x110 [<ffffffff8141f966>] submit_bio+0x76/0x170 [<ffffffff81286dff>] submit_bh_wbc+0x12f/0x160 [<ffffffff81286e62>] submit_bh+0x12/0x20 [<ffffffff813395bd>] jbd2_write_superblock+0x8d/0x170 [<ffffffff8133974d>] jbd2_mark_journal_empty+0x5d/0x90 [<ffffffff813399cb>] jbd2_journal_destroy+0x24b/0x270 [<ffffffff810bc4ca>] ? put_pwq_unlocked+0x2a/0x30 [<ffffffff810bc6f5>] ? destroy_workqueue+0x225/0x250 [<ffffffff81303494>] ext4_put_super+0x64/0x360 [<ffffffff8124ab1a>] generic_shutdown_super+0x6a/0xf0 Cc: Jens Axboe <axboe@kernel.dk> Cc: Keith Busch <keith.busch@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Suggested-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Tested-by: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-10-21 17:20:12 +00:00
/*
* In the !blk_mq case we are only calling this to kill the
* q_usage_counter, otherwise this increases the freeze depth
* and waits for it to return to zero. For this reason there is
* no blk_unfreeze_queue(), and blk_freeze_queue() is not
* exported to drivers as the only user for unfreeze is blk_mq.
*/
blk_freeze_queue_start(q);
if (!q->mq_ops)
blk_drain_queue(q);
blk_mq_freeze_queue_wait(q);
}
block: generic request_queue reference counting Allow pmem, and other synchronous/bio-based block drivers, to fallback on a per-cpu reference count managed by the core for tracking queue live/dead state. The existing per-cpu reference count for the blk_mq case is promoted to be used in all block i/o scenarios. This involves initializing it by default, waiting for it to drop to zero at exit, and holding a live reference over the invocation of q->make_request_fn() in generic_make_request(). The blk_mq code continues to take its own reference per blk_mq request and retains the ability to freeze the queue, but the check that the queue is frozen is moved to generic_make_request(). This fixes crash signatures like the following: BUG: unable to handle kernel paging request at ffff880140000000 [..] Call Trace: [<ffffffff8145e8bf>] ? copy_user_handle_tail+0x5f/0x70 [<ffffffffa004e1e0>] pmem_do_bvec.isra.11+0x70/0xf0 [nd_pmem] [<ffffffffa004e331>] pmem_make_request+0xd1/0x200 [nd_pmem] [<ffffffff811c3162>] ? mempool_alloc+0x72/0x1a0 [<ffffffff8141f8b6>] generic_make_request+0xd6/0x110 [<ffffffff8141f966>] submit_bio+0x76/0x170 [<ffffffff81286dff>] submit_bh_wbc+0x12f/0x160 [<ffffffff81286e62>] submit_bh+0x12/0x20 [<ffffffff813395bd>] jbd2_write_superblock+0x8d/0x170 [<ffffffff8133974d>] jbd2_mark_journal_empty+0x5d/0x90 [<ffffffff813399cb>] jbd2_journal_destroy+0x24b/0x270 [<ffffffff810bc4ca>] ? put_pwq_unlocked+0x2a/0x30 [<ffffffff810bc6f5>] ? destroy_workqueue+0x225/0x250 [<ffffffff81303494>] ext4_put_super+0x64/0x360 [<ffffffff8124ab1a>] generic_shutdown_super+0x6a/0xf0 Cc: Jens Axboe <axboe@kernel.dk> Cc: Keith Busch <keith.busch@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Suggested-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Tested-by: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-10-21 17:20:12 +00:00
void blk_mq_freeze_queue(struct request_queue *q)
{
/*
* ...just an alias to keep freeze and unfreeze actions balanced
* in the blk_mq_* namespace
*/
blk_freeze_queue(q);
}
EXPORT_SYMBOL_GPL(blk_mq_freeze_queue);
void blk_mq_unfreeze_queue(struct request_queue *q)
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
{
int freeze_depth;
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
freeze_depth = atomic_dec_return(&q->mq_freeze_depth);
WARN_ON_ONCE(freeze_depth < 0);
if (!freeze_depth) {
block: generic request_queue reference counting Allow pmem, and other synchronous/bio-based block drivers, to fallback on a per-cpu reference count managed by the core for tracking queue live/dead state. The existing per-cpu reference count for the blk_mq case is promoted to be used in all block i/o scenarios. This involves initializing it by default, waiting for it to drop to zero at exit, and holding a live reference over the invocation of q->make_request_fn() in generic_make_request(). The blk_mq code continues to take its own reference per blk_mq request and retains the ability to freeze the queue, but the check that the queue is frozen is moved to generic_make_request(). This fixes crash signatures like the following: BUG: unable to handle kernel paging request at ffff880140000000 [..] Call Trace: [<ffffffff8145e8bf>] ? copy_user_handle_tail+0x5f/0x70 [<ffffffffa004e1e0>] pmem_do_bvec.isra.11+0x70/0xf0 [nd_pmem] [<ffffffffa004e331>] pmem_make_request+0xd1/0x200 [nd_pmem] [<ffffffff811c3162>] ? mempool_alloc+0x72/0x1a0 [<ffffffff8141f8b6>] generic_make_request+0xd6/0x110 [<ffffffff8141f966>] submit_bio+0x76/0x170 [<ffffffff81286dff>] submit_bh_wbc+0x12f/0x160 [<ffffffff81286e62>] submit_bh+0x12/0x20 [<ffffffff813395bd>] jbd2_write_superblock+0x8d/0x170 [<ffffffff8133974d>] jbd2_mark_journal_empty+0x5d/0x90 [<ffffffff813399cb>] jbd2_journal_destroy+0x24b/0x270 [<ffffffff810bc4ca>] ? put_pwq_unlocked+0x2a/0x30 [<ffffffff810bc6f5>] ? destroy_workqueue+0x225/0x250 [<ffffffff81303494>] ext4_put_super+0x64/0x360 [<ffffffff8124ab1a>] generic_shutdown_super+0x6a/0xf0 Cc: Jens Axboe <axboe@kernel.dk> Cc: Keith Busch <keith.busch@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Suggested-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Tested-by: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-10-21 17:20:12 +00:00
percpu_ref_reinit(&q->q_usage_counter);
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
wake_up_all(&q->mq_freeze_wq);
}
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
}
EXPORT_SYMBOL_GPL(blk_mq_unfreeze_queue);
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
/*
* FIXME: replace the scsi_internal_device_*block_nowait() calls in the
* mpt3sas driver such that this function can be removed.
*/
void blk_mq_quiesce_queue_nowait(struct request_queue *q)
{
blk_queue_flag_set(QUEUE_FLAG_QUIESCED, q);
}
EXPORT_SYMBOL_GPL(blk_mq_quiesce_queue_nowait);
/**
* blk_mq_quiesce_queue() - wait until all ongoing dispatches have finished
* @q: request queue.
*
* Note: this function does not prevent that the struct request end_io()
* callback function is invoked. Once this function is returned, we make
* sure no dispatch can happen until the queue is unquiesced via
* blk_mq_unquiesce_queue().
*/
void blk_mq_quiesce_queue(struct request_queue *q)
{
struct blk_mq_hw_ctx *hctx;
unsigned int i;
bool rcu = false;
blk_mq_quiesce_queue_nowait(q);
queue_for_each_hw_ctx(q, hctx, i) {
if (hctx->flags & BLK_MQ_F_BLOCKING)
synchronize_srcu(hctx->srcu);
else
rcu = true;
}
if (rcu)
synchronize_rcu();
}
EXPORT_SYMBOL_GPL(blk_mq_quiesce_queue);
/*
* blk_mq_unquiesce_queue() - counterpart of blk_mq_quiesce_queue()
* @q: request queue.
*
* This function recovers queue into the state before quiescing
* which is done by blk_mq_quiesce_queue.
*/
void blk_mq_unquiesce_queue(struct request_queue *q)
{
blk_queue_flag_clear(QUEUE_FLAG_QUIESCED, q);
/* dispatch requests which are inserted during quiescing */
blk_mq_run_hw_queues(q, true);
}
EXPORT_SYMBOL_GPL(blk_mq_unquiesce_queue);
void blk_mq_wake_waiters(struct request_queue *q)
{
struct blk_mq_hw_ctx *hctx;
unsigned int i;
queue_for_each_hw_ctx(q, hctx, i)
if (blk_mq_hw_queue_mapped(hctx))
blk_mq_tag_wakeup_all(hctx->tags, true);
}
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
bool blk_mq_can_queue(struct blk_mq_hw_ctx *hctx)
{
return blk_mq_has_free_tags(hctx->tags);
}
EXPORT_SYMBOL(blk_mq_can_queue);
static struct request *blk_mq_rq_ctx_init(struct blk_mq_alloc_data *data,
unsigned int tag, unsigned int op)
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
{
struct blk_mq_tags *tags = blk_mq_tags_from_data(data);
struct request *rq = tags->static_rqs[tag];
req_flags_t rq_flags = 0;
if (data->flags & BLK_MQ_REQ_INTERNAL) {
rq->tag = -1;
rq->internal_tag = tag;
} else {
if (blk_mq_tag_busy(data->hctx)) {
rq_flags = RQF_MQ_INFLIGHT;
atomic_inc(&data->hctx->nr_active);
}
rq->tag = tag;
rq->internal_tag = -1;
data->hctx->tags->rqs[rq->tag] = rq;
}
/* csd/requeue_work/fifo_time is initialized before use */
rq->q = data->q;
rq->mq_ctx = data->ctx;
rq->rq_flags = rq_flags;
rq->cpu = -1;
rq->cmd_flags = op;
if (data->flags & BLK_MQ_REQ_PREEMPT)
rq->rq_flags |= RQF_PREEMPT;
if (blk_queue_io_stat(data->q))
rq->rq_flags |= RQF_IO_STAT;
INIT_LIST_HEAD(&rq->queuelist);
INIT_HLIST_NODE(&rq->hash);
RB_CLEAR_NODE(&rq->rb_node);
rq->rq_disk = NULL;
rq->part = NULL;
rq->start_time_ns = ktime_get_ns();
rq->io_start_time_ns = 0;
rq->nr_phys_segments = 0;
#if defined(CONFIG_BLK_DEV_INTEGRITY)
rq->nr_integrity_segments = 0;
#endif
rq->special = NULL;
/* tag was already set */
rq->extra_len = 0;
rq->__deadline = 0;
INIT_LIST_HEAD(&rq->timeout_list);
rq->timeout = 0;
rq->end_io = NULL;
rq->end_io_data = NULL;
rq->next_rq = NULL;
#ifdef CONFIG_BLK_CGROUP
rq->rl = NULL;
#endif
data->ctx->rq_dispatched[op_is_sync(op)]++;
return rq;
}
static struct request *blk_mq_get_request(struct request_queue *q,
struct bio *bio, unsigned int op,
struct blk_mq_alloc_data *data)
{
struct elevator_queue *e = q->elevator;
struct request *rq;
unsigned int tag;
bool put_ctx_on_error = false;
blk_queue_enter_live(q);
data->q = q;
if (likely(!data->ctx)) {
data->ctx = blk_mq_get_ctx(q);
put_ctx_on_error = true;
}
if (likely(!data->hctx))
data->hctx = blk_mq_map_queue(q, data->ctx->cpu);
if (op & REQ_NOWAIT)
data->flags |= BLK_MQ_REQ_NOWAIT;
if (e) {
data->flags |= BLK_MQ_REQ_INTERNAL;
/*
* Flush requests are special and go directly to the
* dispatch list.
*/
if (!op_is_flush(op) && e->type->ops.mq.limit_depth)
e->type->ops.mq.limit_depth(op, data);
}
tag = blk_mq_get_tag(data);
if (tag == BLK_MQ_TAG_FAIL) {
if (put_ctx_on_error) {
blk_mq_put_ctx(data->ctx);
data->ctx = NULL;
}
blk_queue_exit(q);
return NULL;
}
rq = blk_mq_rq_ctx_init(data, tag, op);
if (!op_is_flush(op)) {
rq->elv.icq = NULL;
if (e && e->type->ops.mq.prepare_request) {
if (e->type->icq_cache && rq_ioc(bio))
blk_mq_sched_assign_ioc(rq, bio);
e->type->ops.mq.prepare_request(rq, bio);
rq->rq_flags |= RQF_ELVPRIV;
}
}
data->hctx->queued++;
return rq;
}
struct request *blk_mq_alloc_request(struct request_queue *q, unsigned int op,
blk_mq_req_flags_t flags)
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
{
struct blk_mq_alloc_data alloc_data = { .flags = flags };
struct request *rq;
int ret;
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
block, scsi: Make SCSI quiesce and resume work reliably The contexts from which a SCSI device can be quiesced or resumed are: * Writing into /sys/class/scsi_device/*/device/state. * SCSI parallel (SPI) domain validation. * The SCSI device power management methods. See also scsi_bus_pm_ops. It is essential during suspend and resume that neither the filesystem state nor the filesystem metadata in RAM changes. This is why while the hibernation image is being written or restored that SCSI devices are quiesced. The SCSI core quiesces devices through scsi_device_quiesce() and scsi_device_resume(). In the SDEV_QUIESCE state execution of non-preempt requests is deferred. This is realized by returning BLKPREP_DEFER from inside scsi_prep_state_check() for quiesced SCSI devices. Avoid that a full queue prevents power management requests to be submitted by deferring allocation of non-preempt requests for devices in the quiesced state. This patch has been tested by running the following commands and by verifying that after each resume the fio job was still running: for ((i=0; i<10; i++)); do ( cd /sys/block/md0/md && while true; do [ "$(<sync_action)" = "idle" ] && echo check > sync_action sleep 1 done ) & pids=($!) for d in /sys/class/block/sd*[a-z]; do bdev=${d#/sys/class/block/} hcil=$(readlink "$d/device") hcil=${hcil#../../../} echo 4 > "$d/queue/nr_requests" echo 1 > "/sys/class/scsi_device/$hcil/device/queue_depth" fio --name="$bdev" --filename="/dev/$bdev" --buffered=0 --bs=512 \ --rw=randread --ioengine=libaio --numjobs=4 --iodepth=16 \ --iodepth_batch=1 --thread --loops=$((2**31)) & pids+=($!) done sleep 1 echo "$(date) Hibernating ..." >>hibernate-test-log.txt systemctl hibernate sleep 10 kill "${pids[@]}" echo idle > /sys/block/md0/md/sync_action wait echo "$(date) Done." >>hibernate-test-log.txt done Reported-by: Oleksandr Natalenko <oleksandr@natalenko.name> References: "I/O hangs after resuming from suspend-to-ram" (https://marc.info/?l=linux-block&m=150340235201348). Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Tested-by: Martin Steigerwald <martin@lichtvoll.de> Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Ming Lei <ming.lei@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-09 18:49:58 +00:00
ret = blk_queue_enter(q, flags);
if (ret)
return ERR_PTR(ret);
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
rq = blk_mq_get_request(q, NULL, op, &alloc_data);
blk_queue_exit(q);
if (!rq)
return ERR_PTR(-EWOULDBLOCK);
blk_mq_put_ctx(alloc_data.ctx);
rq->__data_len = 0;
rq->__sector = (sector_t) -1;
rq->bio = rq->biotail = NULL;
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
return rq;
}
EXPORT_SYMBOL(blk_mq_alloc_request);
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
struct request *blk_mq_alloc_request_hctx(struct request_queue *q,
unsigned int op, blk_mq_req_flags_t flags, unsigned int hctx_idx)
{
struct blk_mq_alloc_data alloc_data = { .flags = flags };
struct request *rq;
unsigned int cpu;
int ret;
/*
* If the tag allocator sleeps we could get an allocation for a
* different hardware context. No need to complicate the low level
* allocator for this for the rare use case of a command tied to
* a specific queue.
*/
if (WARN_ON_ONCE(!(flags & BLK_MQ_REQ_NOWAIT)))
return ERR_PTR(-EINVAL);
if (hctx_idx >= q->nr_hw_queues)
return ERR_PTR(-EIO);
block, scsi: Make SCSI quiesce and resume work reliably The contexts from which a SCSI device can be quiesced or resumed are: * Writing into /sys/class/scsi_device/*/device/state. * SCSI parallel (SPI) domain validation. * The SCSI device power management methods. See also scsi_bus_pm_ops. It is essential during suspend and resume that neither the filesystem state nor the filesystem metadata in RAM changes. This is why while the hibernation image is being written or restored that SCSI devices are quiesced. The SCSI core quiesces devices through scsi_device_quiesce() and scsi_device_resume(). In the SDEV_QUIESCE state execution of non-preempt requests is deferred. This is realized by returning BLKPREP_DEFER from inside scsi_prep_state_check() for quiesced SCSI devices. Avoid that a full queue prevents power management requests to be submitted by deferring allocation of non-preempt requests for devices in the quiesced state. This patch has been tested by running the following commands and by verifying that after each resume the fio job was still running: for ((i=0; i<10; i++)); do ( cd /sys/block/md0/md && while true; do [ "$(<sync_action)" = "idle" ] && echo check > sync_action sleep 1 done ) & pids=($!) for d in /sys/class/block/sd*[a-z]; do bdev=${d#/sys/class/block/} hcil=$(readlink "$d/device") hcil=${hcil#../../../} echo 4 > "$d/queue/nr_requests" echo 1 > "/sys/class/scsi_device/$hcil/device/queue_depth" fio --name="$bdev" --filename="/dev/$bdev" --buffered=0 --bs=512 \ --rw=randread --ioengine=libaio --numjobs=4 --iodepth=16 \ --iodepth_batch=1 --thread --loops=$((2**31)) & pids+=($!) done sleep 1 echo "$(date) Hibernating ..." >>hibernate-test-log.txt systemctl hibernate sleep 10 kill "${pids[@]}" echo idle > /sys/block/md0/md/sync_action wait echo "$(date) Done." >>hibernate-test-log.txt done Reported-by: Oleksandr Natalenko <oleksandr@natalenko.name> References: "I/O hangs after resuming from suspend-to-ram" (https://marc.info/?l=linux-block&m=150340235201348). Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Tested-by: Martin Steigerwald <martin@lichtvoll.de> Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Ming Lei <ming.lei@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-09 18:49:58 +00:00
ret = blk_queue_enter(q, flags);
if (ret)
return ERR_PTR(ret);
/*
* Check if the hardware context is actually mapped to anything.
* If not tell the caller that it should skip this queue.
*/
alloc_data.hctx = q->queue_hw_ctx[hctx_idx];
if (!blk_mq_hw_queue_mapped(alloc_data.hctx)) {
blk_queue_exit(q);
return ERR_PTR(-EXDEV);
}
cpu = cpumask_first_and(alloc_data.hctx->cpumask, cpu_online_mask);
alloc_data.ctx = __blk_mq_get_ctx(q, cpu);
rq = blk_mq_get_request(q, NULL, op, &alloc_data);
blk_queue_exit(q);
if (!rq)
return ERR_PTR(-EWOULDBLOCK);
return rq;
}
EXPORT_SYMBOL_GPL(blk_mq_alloc_request_hctx);
void blk_mq_free_request(struct request *rq)
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
{
struct request_queue *q = rq->q;
struct elevator_queue *e = q->elevator;
struct blk_mq_ctx *ctx = rq->mq_ctx;
struct blk_mq_hw_ctx *hctx = blk_mq_map_queue(q, ctx->cpu);
const int sched_tag = rq->internal_tag;
if (rq->rq_flags & RQF_ELVPRIV) {
if (e && e->type->ops.mq.finish_request)
e->type->ops.mq.finish_request(rq);
if (rq->elv.icq) {
put_io_context(rq->elv.icq->ioc);
rq->elv.icq = NULL;
}
}
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
ctx->rq_completed[rq_is_sync(rq)]++;
if (rq->rq_flags & RQF_MQ_INFLIGHT)
atomic_dec(&hctx->nr_active);
block: hook up writeback throttling Enable throttling of buffered writeback to make it a lot more smooth, and has way less impact on other system activity. Background writeback should be, by definition, background activity. The fact that we flush huge bundles of it at the time means that it potentially has heavy impacts on foreground workloads, which isn't ideal. We can't easily limit the sizes of writes that we do, since that would impact file system layout in the presence of delayed allocation. So just throttle back buffered writeback, unless someone is waiting for it. The algorithm for when to throttle takes its inspiration in the CoDel networking scheduling algorithm. Like CoDel, blk-wb monitors the minimum latencies of requests over a window of time. In that window of time, if the minimum latency of any request exceeds a given target, then a scale count is incremented and the queue depth is shrunk. The next monitoring window is shrunk accordingly. Unlike CoDel, if we hit a window that exhibits good behavior, then we simply increment the scale count and re-calculate the limits for that scale value. This prevents us from oscillating between a close-to-ideal value and max all the time, instead remaining in the windows where we get good behavior. Unlike CoDel, blk-wb allows the scale count to to negative. This happens if we primarily have writes going on. Unlike positive scale counts, this doesn't change the size of the monitoring window. When the heavy writers finish, blk-bw quickly snaps back to it's stable state of a zero scale count. The patch registers a sysfs entry, 'wb_lat_usec'. This sets the latency target to me met. It defaults to 2 msec for non-rotational storage, and 75 msec for rotational storage. Setting this value to '0' disables blk-wb. Generally, a user would not have to touch this setting. We don't enable WBT on devices that are managed with CFQ, and have a non-root block cgroup attached. If we have a proportional share setup on this particular disk, then the wbt throttling will interfere with that. We don't have a strong need for wbt for that case, since we will rely on CFQ doing that for us. Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-09 19:38:14 +00:00
if (unlikely(laptop_mode && !blk_rq_is_passthrough(rq)))
laptop_io_completion(q->backing_dev_info);
wbt_done(q->rq_wb, rq);
if (blk_rq_rl(rq))
blk_put_rl(blk_rq_rl(rq));
blk-mq: replace timeout synchronization with a RCU and generation based scheme Currently, blk-mq timeout path synchronizes against the usual issue/completion path using a complex scheme involving atomic bitflags, REQ_ATOM_*, memory barriers and subtle memory coherence rules. Unfortunately, it contains quite a few holes. There's a complex dancing around REQ_ATOM_STARTED and REQ_ATOM_COMPLETE between issue/completion and timeout paths; however, they don't have a synchronization point across request recycle instances and it isn't clear what the barriers add. blk_mq_check_expired() can easily read STARTED from N-2'th iteration, deadline from N-1'th, blk_mark_rq_complete() against Nth instance. In fact, it's pretty easy to make blk_mq_check_expired() terminate a later instance of a request. If we induce 5 sec delay before time_after_eq() test in blk_mq_check_expired(), shorten the timeout to 2s, and issue back-to-back large IOs, blk-mq starts timing out requests spuriously pretty quickly. Nothing actually timed out. It just made the call on a recycle instance of a request and then terminated a later instance long after the original instance finished. The scenario isn't theoretical either. This patch replaces the broken synchronization mechanism with a RCU and generation number based one. 1. Each request has a u64 generation + state value, which can be updated only by the request owner. Whenever a request becomes in-flight, the generation number gets bumped up too. This provides the basis for the timeout path to distinguish different recycle instances of the request. Also, marking a request in-flight and setting its deadline are protected with a seqcount so that the timeout path can fetch both values coherently. 2. The timeout path fetches the generation, state and deadline. If the verdict is timeout, it records the generation into a dedicated request abortion field and does RCU wait. 3. The completion path is also protected by RCU (from the previous patch) and checks whether the current generation number and state match the abortion field. If so, it skips completion. 4. The timeout path, after RCU wait, scans requests again and terminates the ones whose generation and state still match the ones requested for abortion. By now, the timeout path knows that either the generation number and state changed if it lost the race or the completion will yield to it and can safely timeout the request. While it's more lines of code, it's conceptually simpler, doesn't depend on direct use of subtle memory ordering or coherence, and hopefully doesn't terminate the wrong instance. While this change makes REQ_ATOM_COMPLETE synchronization unnecessary between issue/complete and timeout paths, REQ_ATOM_COMPLETE isn't removed yet as it's still used in other places. Future patches will move all state tracking to the new mechanism and remove all bitops in the hot paths. Note that this patch adds a comment explaining a race condition in BLK_EH_RESET_TIMER path. The race has always been there and this patch doesn't change it. It's just documenting the existing race. v2: - Fixed BLK_EH_RESET_TIMER handling as pointed out by Jianchao. - s/request->gstate_seqc/request->gstate_seq/ as suggested by Peter. - READ_ONCE() added in blk_mq_rq_update_state() as suggested by Peter. v3: - Fixed possible extended seqcount / u64_stats_sync read looping spotted by Peter. - MQ_RQ_IDLE was incorrectly being set in complete_request instead of free_request. Fixed. v4: - Rebased on top of hctx_lock() refactoring patch. - Added comment explaining the use of hctx_lock() in completion path. v5: - Added comments requested by Bart. - Note the addition of BLK_EH_RESET_TIMER race condition in the commit message. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: "jianchao.wang" <jianchao.w.wang@oracle.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Bart Van Assche <Bart.VanAssche@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-09 16:29:48 +00:00
blk_mq_rq_update_state(rq, MQ_RQ_IDLE);
if (rq->tag != -1)
blk_mq_put_tag(hctx, hctx->tags, ctx, rq->tag);
if (sched_tag != -1)
blk_mq_put_tag(hctx, hctx->sched_tags, ctx, sched_tag);
blk_mq_sched_restart(hctx);
block: generic request_queue reference counting Allow pmem, and other synchronous/bio-based block drivers, to fallback on a per-cpu reference count managed by the core for tracking queue live/dead state. The existing per-cpu reference count for the blk_mq case is promoted to be used in all block i/o scenarios. This involves initializing it by default, waiting for it to drop to zero at exit, and holding a live reference over the invocation of q->make_request_fn() in generic_make_request(). The blk_mq code continues to take its own reference per blk_mq request and retains the ability to freeze the queue, but the check that the queue is frozen is moved to generic_make_request(). This fixes crash signatures like the following: BUG: unable to handle kernel paging request at ffff880140000000 [..] Call Trace: [<ffffffff8145e8bf>] ? copy_user_handle_tail+0x5f/0x70 [<ffffffffa004e1e0>] pmem_do_bvec.isra.11+0x70/0xf0 [nd_pmem] [<ffffffffa004e331>] pmem_make_request+0xd1/0x200 [nd_pmem] [<ffffffff811c3162>] ? mempool_alloc+0x72/0x1a0 [<ffffffff8141f8b6>] generic_make_request+0xd6/0x110 [<ffffffff8141f966>] submit_bio+0x76/0x170 [<ffffffff81286dff>] submit_bh_wbc+0x12f/0x160 [<ffffffff81286e62>] submit_bh+0x12/0x20 [<ffffffff813395bd>] jbd2_write_superblock+0x8d/0x170 [<ffffffff8133974d>] jbd2_mark_journal_empty+0x5d/0x90 [<ffffffff813399cb>] jbd2_journal_destroy+0x24b/0x270 [<ffffffff810bc4ca>] ? put_pwq_unlocked+0x2a/0x30 [<ffffffff810bc6f5>] ? destroy_workqueue+0x225/0x250 [<ffffffff81303494>] ext4_put_super+0x64/0x360 [<ffffffff8124ab1a>] generic_shutdown_super+0x6a/0xf0 Cc: Jens Axboe <axboe@kernel.dk> Cc: Keith Busch <keith.busch@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Suggested-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Tested-by: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-10-21 17:20:12 +00:00
blk_queue_exit(q);
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
}
EXPORT_SYMBOL_GPL(blk_mq_free_request);
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
inline void __blk_mq_end_request(struct request *rq, blk_status_t error)
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
{
u64 now = ktime_get_ns();
if (rq->rq_flags & RQF_STATS) {
blk_mq_poll_stats_start(rq->q);
blk_stat_add(rq, now);
}
blk_account_io_done(rq, now);
if (rq->end_io) {
wbt_done(rq->q->rq_wb, rq);
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
rq->end_io(rq, error);
} else {
if (unlikely(blk_bidi_rq(rq)))
blk_mq_free_request(rq->next_rq);
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
blk_mq_free_request(rq);
}
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
}
EXPORT_SYMBOL(__blk_mq_end_request);
void blk_mq_end_request(struct request *rq, blk_status_t error)
{
if (blk_update_request(rq, error, blk_rq_bytes(rq)))
BUG();
__blk_mq_end_request(rq, error);
}
EXPORT_SYMBOL(blk_mq_end_request);
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
static void __blk_mq_complete_request_remote(void *data)
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
{
struct request *rq = data;
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
rq->q->softirq_done_fn(rq);
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
}
static void __blk_mq_complete_request(struct request *rq)
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
{
struct blk_mq_ctx *ctx = rq->mq_ctx;
bool shared = false;
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
int cpu;
blk-mq: replace timeout synchronization with a RCU and generation based scheme Currently, blk-mq timeout path synchronizes against the usual issue/completion path using a complex scheme involving atomic bitflags, REQ_ATOM_*, memory barriers and subtle memory coherence rules. Unfortunately, it contains quite a few holes. There's a complex dancing around REQ_ATOM_STARTED and REQ_ATOM_COMPLETE between issue/completion and timeout paths; however, they don't have a synchronization point across request recycle instances and it isn't clear what the barriers add. blk_mq_check_expired() can easily read STARTED from N-2'th iteration, deadline from N-1'th, blk_mark_rq_complete() against Nth instance. In fact, it's pretty easy to make blk_mq_check_expired() terminate a later instance of a request. If we induce 5 sec delay before time_after_eq() test in blk_mq_check_expired(), shorten the timeout to 2s, and issue back-to-back large IOs, blk-mq starts timing out requests spuriously pretty quickly. Nothing actually timed out. It just made the call on a recycle instance of a request and then terminated a later instance long after the original instance finished. The scenario isn't theoretical either. This patch replaces the broken synchronization mechanism with a RCU and generation number based one. 1. Each request has a u64 generation + state value, which can be updated only by the request owner. Whenever a request becomes in-flight, the generation number gets bumped up too. This provides the basis for the timeout path to distinguish different recycle instances of the request. Also, marking a request in-flight and setting its deadline are protected with a seqcount so that the timeout path can fetch both values coherently. 2. The timeout path fetches the generation, state and deadline. If the verdict is timeout, it records the generation into a dedicated request abortion field and does RCU wait. 3. The completion path is also protected by RCU (from the previous patch) and checks whether the current generation number and state match the abortion field. If so, it skips completion. 4. The timeout path, after RCU wait, scans requests again and terminates the ones whose generation and state still match the ones requested for abortion. By now, the timeout path knows that either the generation number and state changed if it lost the race or the completion will yield to it and can safely timeout the request. While it's more lines of code, it's conceptually simpler, doesn't depend on direct use of subtle memory ordering or coherence, and hopefully doesn't terminate the wrong instance. While this change makes REQ_ATOM_COMPLETE synchronization unnecessary between issue/complete and timeout paths, REQ_ATOM_COMPLETE isn't removed yet as it's still used in other places. Future patches will move all state tracking to the new mechanism and remove all bitops in the hot paths. Note that this patch adds a comment explaining a race condition in BLK_EH_RESET_TIMER path. The race has always been there and this patch doesn't change it. It's just documenting the existing race. v2: - Fixed BLK_EH_RESET_TIMER handling as pointed out by Jianchao. - s/request->gstate_seqc/request->gstate_seq/ as suggested by Peter. - READ_ONCE() added in blk_mq_rq_update_state() as suggested by Peter. v3: - Fixed possible extended seqcount / u64_stats_sync read looping spotted by Peter. - MQ_RQ_IDLE was incorrectly being set in complete_request instead of free_request. Fixed. v4: - Rebased on top of hctx_lock() refactoring patch. - Added comment explaining the use of hctx_lock() in completion path. v5: - Added comments requested by Bart. - Note the addition of BLK_EH_RESET_TIMER race condition in the commit message. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: "jianchao.wang" <jianchao.w.wang@oracle.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Bart Van Assche <Bart.VanAssche@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-09 16:29:48 +00:00
WARN_ON_ONCE(blk_mq_rq_state(rq) != MQ_RQ_IN_FLIGHT);
blk_mq_rq_update_state(rq, MQ_RQ_COMPLETE);
blk-mq: replace timeout synchronization with a RCU and generation based scheme Currently, blk-mq timeout path synchronizes against the usual issue/completion path using a complex scheme involving atomic bitflags, REQ_ATOM_*, memory barriers and subtle memory coherence rules. Unfortunately, it contains quite a few holes. There's a complex dancing around REQ_ATOM_STARTED and REQ_ATOM_COMPLETE between issue/completion and timeout paths; however, they don't have a synchronization point across request recycle instances and it isn't clear what the barriers add. blk_mq_check_expired() can easily read STARTED from N-2'th iteration, deadline from N-1'th, blk_mark_rq_complete() against Nth instance. In fact, it's pretty easy to make blk_mq_check_expired() terminate a later instance of a request. If we induce 5 sec delay before time_after_eq() test in blk_mq_check_expired(), shorten the timeout to 2s, and issue back-to-back large IOs, blk-mq starts timing out requests spuriously pretty quickly. Nothing actually timed out. It just made the call on a recycle instance of a request and then terminated a later instance long after the original instance finished. The scenario isn't theoretical either. This patch replaces the broken synchronization mechanism with a RCU and generation number based one. 1. Each request has a u64 generation + state value, which can be updated only by the request owner. Whenever a request becomes in-flight, the generation number gets bumped up too. This provides the basis for the timeout path to distinguish different recycle instances of the request. Also, marking a request in-flight and setting its deadline are protected with a seqcount so that the timeout path can fetch both values coherently. 2. The timeout path fetches the generation, state and deadline. If the verdict is timeout, it records the generation into a dedicated request abortion field and does RCU wait. 3. The completion path is also protected by RCU (from the previous patch) and checks whether the current generation number and state match the abortion field. If so, it skips completion. 4. The timeout path, after RCU wait, scans requests again and terminates the ones whose generation and state still match the ones requested for abortion. By now, the timeout path knows that either the generation number and state changed if it lost the race or the completion will yield to it and can safely timeout the request. While it's more lines of code, it's conceptually simpler, doesn't depend on direct use of subtle memory ordering or coherence, and hopefully doesn't terminate the wrong instance. While this change makes REQ_ATOM_COMPLETE synchronization unnecessary between issue/complete and timeout paths, REQ_ATOM_COMPLETE isn't removed yet as it's still used in other places. Future patches will move all state tracking to the new mechanism and remove all bitops in the hot paths. Note that this patch adds a comment explaining a race condition in BLK_EH_RESET_TIMER path. The race has always been there and this patch doesn't change it. It's just documenting the existing race. v2: - Fixed BLK_EH_RESET_TIMER handling as pointed out by Jianchao. - s/request->gstate_seqc/request->gstate_seq/ as suggested by Peter. - READ_ONCE() added in blk_mq_rq_update_state() as suggested by Peter. v3: - Fixed possible extended seqcount / u64_stats_sync read looping spotted by Peter. - MQ_RQ_IDLE was incorrectly being set in complete_request instead of free_request. Fixed. v4: - Rebased on top of hctx_lock() refactoring patch. - Added comment explaining the use of hctx_lock() in completion path. v5: - Added comments requested by Bart. - Note the addition of BLK_EH_RESET_TIMER race condition in the commit message. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: "jianchao.wang" <jianchao.w.wang@oracle.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Bart Van Assche <Bart.VanAssche@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-09 16:29:48 +00:00
if (rq->internal_tag != -1)
blk_mq_sched_completed_request(rq);
if (!test_bit(QUEUE_FLAG_SAME_COMP, &rq->q->queue_flags)) {
rq->q->softirq_done_fn(rq);
return;
}
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
cpu = get_cpu();
if (!test_bit(QUEUE_FLAG_SAME_FORCE, &rq->q->queue_flags))
shared = cpus_share_cache(cpu, ctx->cpu);
if (cpu != ctx->cpu && !shared && cpu_online(ctx->cpu)) {
rq->csd.func = __blk_mq_complete_request_remote;
rq->csd.info = rq;
rq->csd.flags = 0;
smp_call_function_single_async(ctx->cpu, &rq->csd);
} else {
rq->q->softirq_done_fn(rq);
}
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
put_cpu();
}
static void hctx_unlock(struct blk_mq_hw_ctx *hctx, int srcu_idx)
__releases(hctx->srcu)
{
if (!(hctx->flags & BLK_MQ_F_BLOCKING))
rcu_read_unlock();
else
srcu_read_unlock(hctx->srcu, srcu_idx);
}
static void hctx_lock(struct blk_mq_hw_ctx *hctx, int *srcu_idx)
__acquires(hctx->srcu)
{
if (!(hctx->flags & BLK_MQ_F_BLOCKING)) {
/* shut up gcc false positive */
*srcu_idx = 0;
rcu_read_lock();
} else
*srcu_idx = srcu_read_lock(hctx->srcu);
}
blk-mq: replace timeout synchronization with a RCU and generation based scheme Currently, blk-mq timeout path synchronizes against the usual issue/completion path using a complex scheme involving atomic bitflags, REQ_ATOM_*, memory barriers and subtle memory coherence rules. Unfortunately, it contains quite a few holes. There's a complex dancing around REQ_ATOM_STARTED and REQ_ATOM_COMPLETE between issue/completion and timeout paths; however, they don't have a synchronization point across request recycle instances and it isn't clear what the barriers add. blk_mq_check_expired() can easily read STARTED from N-2'th iteration, deadline from N-1'th, blk_mark_rq_complete() against Nth instance. In fact, it's pretty easy to make blk_mq_check_expired() terminate a later instance of a request. If we induce 5 sec delay before time_after_eq() test in blk_mq_check_expired(), shorten the timeout to 2s, and issue back-to-back large IOs, blk-mq starts timing out requests spuriously pretty quickly. Nothing actually timed out. It just made the call on a recycle instance of a request and then terminated a later instance long after the original instance finished. The scenario isn't theoretical either. This patch replaces the broken synchronization mechanism with a RCU and generation number based one. 1. Each request has a u64 generation + state value, which can be updated only by the request owner. Whenever a request becomes in-flight, the generation number gets bumped up too. This provides the basis for the timeout path to distinguish different recycle instances of the request. Also, marking a request in-flight and setting its deadline are protected with a seqcount so that the timeout path can fetch both values coherently. 2. The timeout path fetches the generation, state and deadline. If the verdict is timeout, it records the generation into a dedicated request abortion field and does RCU wait. 3. The completion path is also protected by RCU (from the previous patch) and checks whether the current generation number and state match the abortion field. If so, it skips completion. 4. The timeout path, after RCU wait, scans requests again and terminates the ones whose generation and state still match the ones requested for abortion. By now, the timeout path knows that either the generation number and state changed if it lost the race or the completion will yield to it and can safely timeout the request. While it's more lines of code, it's conceptually simpler, doesn't depend on direct use of subtle memory ordering or coherence, and hopefully doesn't terminate the wrong instance. While this change makes REQ_ATOM_COMPLETE synchronization unnecessary between issue/complete and timeout paths, REQ_ATOM_COMPLETE isn't removed yet as it's still used in other places. Future patches will move all state tracking to the new mechanism and remove all bitops in the hot paths. Note that this patch adds a comment explaining a race condition in BLK_EH_RESET_TIMER path. The race has always been there and this patch doesn't change it. It's just documenting the existing race. v2: - Fixed BLK_EH_RESET_TIMER handling as pointed out by Jianchao. - s/request->gstate_seqc/request->gstate_seq/ as suggested by Peter. - READ_ONCE() added in blk_mq_rq_update_state() as suggested by Peter. v3: - Fixed possible extended seqcount / u64_stats_sync read looping spotted by Peter. - MQ_RQ_IDLE was incorrectly being set in complete_request instead of free_request. Fixed. v4: - Rebased on top of hctx_lock() refactoring patch. - Added comment explaining the use of hctx_lock() in completion path. v5: - Added comments requested by Bart. - Note the addition of BLK_EH_RESET_TIMER race condition in the commit message. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: "jianchao.wang" <jianchao.w.wang@oracle.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Bart Van Assche <Bart.VanAssche@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-09 16:29:48 +00:00
static void blk_mq_rq_update_aborted_gstate(struct request *rq, u64 gstate)
{
unsigned long flags;
/*
* blk_mq_rq_aborted_gstate() is used from the completion path and
* can thus be called from irq context. u64_stats_fetch in the
* middle of update on the same CPU leads to lockup. Disable irq
* while updating.
*/
local_irq_save(flags);
u64_stats_update_begin(&rq->aborted_gstate_sync);
rq->aborted_gstate = gstate;
u64_stats_update_end(&rq->aborted_gstate_sync);
local_irq_restore(flags);
}
static u64 blk_mq_rq_aborted_gstate(struct request *rq)
{
unsigned int start;
u64 aborted_gstate;
do {
start = u64_stats_fetch_begin(&rq->aborted_gstate_sync);
aborted_gstate = rq->aborted_gstate;
} while (u64_stats_fetch_retry(&rq->aborted_gstate_sync, start));
return aborted_gstate;
}
/**
* blk_mq_complete_request - end I/O on a request
* @rq: the request being processed
*
* Description:
* Ends all I/O on a request. It does not handle partial completions.
* The actual completion happens out-of-order, through a IPI handler.
**/
void blk_mq_complete_request(struct request *rq)
{
struct request_queue *q = rq->q;
struct blk_mq_hw_ctx *hctx = blk_mq_map_queue(q, rq->mq_ctx->cpu);
int srcu_idx;
if (unlikely(blk_should_fake_timeout(q)))
return;
blk-mq: replace timeout synchronization with a RCU and generation based scheme Currently, blk-mq timeout path synchronizes against the usual issue/completion path using a complex scheme involving atomic bitflags, REQ_ATOM_*, memory barriers and subtle memory coherence rules. Unfortunately, it contains quite a few holes. There's a complex dancing around REQ_ATOM_STARTED and REQ_ATOM_COMPLETE between issue/completion and timeout paths; however, they don't have a synchronization point across request recycle instances and it isn't clear what the barriers add. blk_mq_check_expired() can easily read STARTED from N-2'th iteration, deadline from N-1'th, blk_mark_rq_complete() against Nth instance. In fact, it's pretty easy to make blk_mq_check_expired() terminate a later instance of a request. If we induce 5 sec delay before time_after_eq() test in blk_mq_check_expired(), shorten the timeout to 2s, and issue back-to-back large IOs, blk-mq starts timing out requests spuriously pretty quickly. Nothing actually timed out. It just made the call on a recycle instance of a request and then terminated a later instance long after the original instance finished. The scenario isn't theoretical either. This patch replaces the broken synchronization mechanism with a RCU and generation number based one. 1. Each request has a u64 generation + state value, which can be updated only by the request owner. Whenever a request becomes in-flight, the generation number gets bumped up too. This provides the basis for the timeout path to distinguish different recycle instances of the request. Also, marking a request in-flight and setting its deadline are protected with a seqcount so that the timeout path can fetch both values coherently. 2. The timeout path fetches the generation, state and deadline. If the verdict is timeout, it records the generation into a dedicated request abortion field and does RCU wait. 3. The completion path is also protected by RCU (from the previous patch) and checks whether the current generation number and state match the abortion field. If so, it skips completion. 4. The timeout path, after RCU wait, scans requests again and terminates the ones whose generation and state still match the ones requested for abortion. By now, the timeout path knows that either the generation number and state changed if it lost the race or the completion will yield to it and can safely timeout the request. While it's more lines of code, it's conceptually simpler, doesn't depend on direct use of subtle memory ordering or coherence, and hopefully doesn't terminate the wrong instance. While this change makes REQ_ATOM_COMPLETE synchronization unnecessary between issue/complete and timeout paths, REQ_ATOM_COMPLETE isn't removed yet as it's still used in other places. Future patches will move all state tracking to the new mechanism and remove all bitops in the hot paths. Note that this patch adds a comment explaining a race condition in BLK_EH_RESET_TIMER path. The race has always been there and this patch doesn't change it. It's just documenting the existing race. v2: - Fixed BLK_EH_RESET_TIMER handling as pointed out by Jianchao. - s/request->gstate_seqc/request->gstate_seq/ as suggested by Peter. - READ_ONCE() added in blk_mq_rq_update_state() as suggested by Peter. v3: - Fixed possible extended seqcount / u64_stats_sync read looping spotted by Peter. - MQ_RQ_IDLE was incorrectly being set in complete_request instead of free_request. Fixed. v4: - Rebased on top of hctx_lock() refactoring patch. - Added comment explaining the use of hctx_lock() in completion path. v5: - Added comments requested by Bart. - Note the addition of BLK_EH_RESET_TIMER race condition in the commit message. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: "jianchao.wang" <jianchao.w.wang@oracle.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Bart Van Assche <Bart.VanAssche@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-09 16:29:48 +00:00
/*
* If @rq->aborted_gstate equals the current instance, timeout is
* claiming @rq and we lost. This is synchronized through
* hctx_lock(). See blk_mq_timeout_work() for details.
*
* Completion path never blocks and we can directly use RCU here
* instead of hctx_lock() which can be either RCU or SRCU.
* However, that would complicate paths which want to synchronize
* against us. Let stay in sync with the issue path so that
* hctx_lock() covers both issue and completion paths.
*/
hctx_lock(hctx, &srcu_idx);
if (blk_mq_rq_aborted_gstate(rq) != rq->gstate)
__blk_mq_complete_request(rq);
hctx_unlock(hctx, srcu_idx);
}
EXPORT_SYMBOL(blk_mq_complete_request);
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
int blk_mq_request_started(struct request *rq)
{
return blk_mq_rq_state(rq) != MQ_RQ_IDLE;
}
EXPORT_SYMBOL_GPL(blk_mq_request_started);
void blk_mq_start_request(struct request *rq)
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
{
struct request_queue *q = rq->q;
blk_mq_sched_started_request(rq);
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
trace_block_rq_issue(q, rq);
if (test_bit(QUEUE_FLAG_STATS, &q->queue_flags)) {
rq->io_start_time_ns = ktime_get_ns();
#ifdef CONFIG_BLK_DEV_THROTTLING_LOW
rq->throtl_size = blk_rq_sectors(rq);
#endif
rq->rq_flags |= RQF_STATS;
wbt_issue(q->rq_wb, rq);
}
blk-mq: replace timeout synchronization with a RCU and generation based scheme Currently, blk-mq timeout path synchronizes against the usual issue/completion path using a complex scheme involving atomic bitflags, REQ_ATOM_*, memory barriers and subtle memory coherence rules. Unfortunately, it contains quite a few holes. There's a complex dancing around REQ_ATOM_STARTED and REQ_ATOM_COMPLETE between issue/completion and timeout paths; however, they don't have a synchronization point across request recycle instances and it isn't clear what the barriers add. blk_mq_check_expired() can easily read STARTED from N-2'th iteration, deadline from N-1'th, blk_mark_rq_complete() against Nth instance. In fact, it's pretty easy to make blk_mq_check_expired() terminate a later instance of a request. If we induce 5 sec delay before time_after_eq() test in blk_mq_check_expired(), shorten the timeout to 2s, and issue back-to-back large IOs, blk-mq starts timing out requests spuriously pretty quickly. Nothing actually timed out. It just made the call on a recycle instance of a request and then terminated a later instance long after the original instance finished. The scenario isn't theoretical either. This patch replaces the broken synchronization mechanism with a RCU and generation number based one. 1. Each request has a u64 generation + state value, which can be updated only by the request owner. Whenever a request becomes in-flight, the generation number gets bumped up too. This provides the basis for the timeout path to distinguish different recycle instances of the request. Also, marking a request in-flight and setting its deadline are protected with a seqcount so that the timeout path can fetch both values coherently. 2. The timeout path fetches the generation, state and deadline. If the verdict is timeout, it records the generation into a dedicated request abortion field and does RCU wait. 3. The completion path is also protected by RCU (from the previous patch) and checks whether the current generation number and state match the abortion field. If so, it skips completion. 4. The timeout path, after RCU wait, scans requests again and terminates the ones whose generation and state still match the ones requested for abortion. By now, the timeout path knows that either the generation number and state changed if it lost the race or the completion will yield to it and can safely timeout the request. While it's more lines of code, it's conceptually simpler, doesn't depend on direct use of subtle memory ordering or coherence, and hopefully doesn't terminate the wrong instance. While this change makes REQ_ATOM_COMPLETE synchronization unnecessary between issue/complete and timeout paths, REQ_ATOM_COMPLETE isn't removed yet as it's still used in other places. Future patches will move all state tracking to the new mechanism and remove all bitops in the hot paths. Note that this patch adds a comment explaining a race condition in BLK_EH_RESET_TIMER path. The race has always been there and this patch doesn't change it. It's just documenting the existing race. v2: - Fixed BLK_EH_RESET_TIMER handling as pointed out by Jianchao. - s/request->gstate_seqc/request->gstate_seq/ as suggested by Peter. - READ_ONCE() added in blk_mq_rq_update_state() as suggested by Peter. v3: - Fixed possible extended seqcount / u64_stats_sync read looping spotted by Peter. - MQ_RQ_IDLE was incorrectly being set in complete_request instead of free_request. Fixed. v4: - Rebased on top of hctx_lock() refactoring patch. - Added comment explaining the use of hctx_lock() in completion path. v5: - Added comments requested by Bart. - Note the addition of BLK_EH_RESET_TIMER race condition in the commit message. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: "jianchao.wang" <jianchao.w.wang@oracle.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Bart Van Assche <Bart.VanAssche@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-09 16:29:48 +00:00
WARN_ON_ONCE(blk_mq_rq_state(rq) != MQ_RQ_IDLE);
/*
blk-mq: replace timeout synchronization with a RCU and generation based scheme Currently, blk-mq timeout path synchronizes against the usual issue/completion path using a complex scheme involving atomic bitflags, REQ_ATOM_*, memory barriers and subtle memory coherence rules. Unfortunately, it contains quite a few holes. There's a complex dancing around REQ_ATOM_STARTED and REQ_ATOM_COMPLETE between issue/completion and timeout paths; however, they don't have a synchronization point across request recycle instances and it isn't clear what the barriers add. blk_mq_check_expired() can easily read STARTED from N-2'th iteration, deadline from N-1'th, blk_mark_rq_complete() against Nth instance. In fact, it's pretty easy to make blk_mq_check_expired() terminate a later instance of a request. If we induce 5 sec delay before time_after_eq() test in blk_mq_check_expired(), shorten the timeout to 2s, and issue back-to-back large IOs, blk-mq starts timing out requests spuriously pretty quickly. Nothing actually timed out. It just made the call on a recycle instance of a request and then terminated a later instance long after the original instance finished. The scenario isn't theoretical either. This patch replaces the broken synchronization mechanism with a RCU and generation number based one. 1. Each request has a u64 generation + state value, which can be updated only by the request owner. Whenever a request becomes in-flight, the generation number gets bumped up too. This provides the basis for the timeout path to distinguish different recycle instances of the request. Also, marking a request in-flight and setting its deadline are protected with a seqcount so that the timeout path can fetch both values coherently. 2. The timeout path fetches the generation, state and deadline. If the verdict is timeout, it records the generation into a dedicated request abortion field and does RCU wait. 3. The completion path is also protected by RCU (from the previous patch) and checks whether the current generation number and state match the abortion field. If so, it skips completion. 4. The timeout path, after RCU wait, scans requests again and terminates the ones whose generation and state still match the ones requested for abortion. By now, the timeout path knows that either the generation number and state changed if it lost the race or the completion will yield to it and can safely timeout the request. While it's more lines of code, it's conceptually simpler, doesn't depend on direct use of subtle memory ordering or coherence, and hopefully doesn't terminate the wrong instance. While this change makes REQ_ATOM_COMPLETE synchronization unnecessary between issue/complete and timeout paths, REQ_ATOM_COMPLETE isn't removed yet as it's still used in other places. Future patches will move all state tracking to the new mechanism and remove all bitops in the hot paths. Note that this patch adds a comment explaining a race condition in BLK_EH_RESET_TIMER path. The race has always been there and this patch doesn't change it. It's just documenting the existing race. v2: - Fixed BLK_EH_RESET_TIMER handling as pointed out by Jianchao. - s/request->gstate_seqc/request->gstate_seq/ as suggested by Peter. - READ_ONCE() added in blk_mq_rq_update_state() as suggested by Peter. v3: - Fixed possible extended seqcount / u64_stats_sync read looping spotted by Peter. - MQ_RQ_IDLE was incorrectly being set in complete_request instead of free_request. Fixed. v4: - Rebased on top of hctx_lock() refactoring patch. - Added comment explaining the use of hctx_lock() in completion path. v5: - Added comments requested by Bart. - Note the addition of BLK_EH_RESET_TIMER race condition in the commit message. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: "jianchao.wang" <jianchao.w.wang@oracle.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Bart Van Assche <Bart.VanAssche@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-09 16:29:48 +00:00
* Mark @rq in-flight which also advances the generation number,
* and register for timeout. Protect with a seqcount to allow the
* timeout path to read both @rq->gstate and @rq->deadline
* coherently.
blk-mq: attempt to fix atomic flag memory ordering Attempt to untangle the ordering in blk-mq. The patch introducing the single smp_mb__before_atomic() is obviously broken in that it doesn't clearly specify a pairing barrier and an obtained guarantee. The comment is further misleading in that it hints that the deadline store and the COMPLETE store also need to be ordered, but AFAICT there is no such dependency. However what does appear to be important is the clear happening _after_ the store, and that worked by pure accident. This clarifies blk_mq_start_request() -- we should not get there with STARTING set -- this simplifies the code and makes the barrier usage sane (the old code could be read to allow not having _any_ atomic after the barrier, in which case the barrier hasn't got anything to order). We then also introduce the missing pairing barrier for it. Also down-grade the barrier to smp_wmb(), this is cheaper for PowerPC/ARM and doesn't cost anything extra on x86. And it documents the STARTING vs COMPLETE ordering. Although I've not been entirely successful in reverse engineering the blk-mq state machine so there might still be more funnies around timeout vs requeue. If I got anything wrong, feel free to educate me by adding comments to clarify things ;-) Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Will Deacon <will.deacon@arm.com> Cc: Ming Lei <tom.leiming@gmail.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Andrea Parri <parri.andrea@gmail.com> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Bart Van Assche <bart.vanassche@wdc.com> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Fixes: 538b75341835 ("blk-mq: request deadline must be visible before marking rq as started") Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-09-06 08:00:22 +00:00
*
blk-mq: replace timeout synchronization with a RCU and generation based scheme Currently, blk-mq timeout path synchronizes against the usual issue/completion path using a complex scheme involving atomic bitflags, REQ_ATOM_*, memory barriers and subtle memory coherence rules. Unfortunately, it contains quite a few holes. There's a complex dancing around REQ_ATOM_STARTED and REQ_ATOM_COMPLETE between issue/completion and timeout paths; however, they don't have a synchronization point across request recycle instances and it isn't clear what the barriers add. blk_mq_check_expired() can easily read STARTED from N-2'th iteration, deadline from N-1'th, blk_mark_rq_complete() against Nth instance. In fact, it's pretty easy to make blk_mq_check_expired() terminate a later instance of a request. If we induce 5 sec delay before time_after_eq() test in blk_mq_check_expired(), shorten the timeout to 2s, and issue back-to-back large IOs, blk-mq starts timing out requests spuriously pretty quickly. Nothing actually timed out. It just made the call on a recycle instance of a request and then terminated a later instance long after the original instance finished. The scenario isn't theoretical either. This patch replaces the broken synchronization mechanism with a RCU and generation number based one. 1. Each request has a u64 generation + state value, which can be updated only by the request owner. Whenever a request becomes in-flight, the generation number gets bumped up too. This provides the basis for the timeout path to distinguish different recycle instances of the request. Also, marking a request in-flight and setting its deadline are protected with a seqcount so that the timeout path can fetch both values coherently. 2. The timeout path fetches the generation, state and deadline. If the verdict is timeout, it records the generation into a dedicated request abortion field and does RCU wait. 3. The completion path is also protected by RCU (from the previous patch) and checks whether the current generation number and state match the abortion field. If so, it skips completion. 4. The timeout path, after RCU wait, scans requests again and terminates the ones whose generation and state still match the ones requested for abortion. By now, the timeout path knows that either the generation number and state changed if it lost the race or the completion will yield to it and can safely timeout the request. While it's more lines of code, it's conceptually simpler, doesn't depend on direct use of subtle memory ordering or coherence, and hopefully doesn't terminate the wrong instance. While this change makes REQ_ATOM_COMPLETE synchronization unnecessary between issue/complete and timeout paths, REQ_ATOM_COMPLETE isn't removed yet as it's still used in other places. Future patches will move all state tracking to the new mechanism and remove all bitops in the hot paths. Note that this patch adds a comment explaining a race condition in BLK_EH_RESET_TIMER path. The race has always been there and this patch doesn't change it. It's just documenting the existing race. v2: - Fixed BLK_EH_RESET_TIMER handling as pointed out by Jianchao. - s/request->gstate_seqc/request->gstate_seq/ as suggested by Peter. - READ_ONCE() added in blk_mq_rq_update_state() as suggested by Peter. v3: - Fixed possible extended seqcount / u64_stats_sync read looping spotted by Peter. - MQ_RQ_IDLE was incorrectly being set in complete_request instead of free_request. Fixed. v4: - Rebased on top of hctx_lock() refactoring patch. - Added comment explaining the use of hctx_lock() in completion path. v5: - Added comments requested by Bart. - Note the addition of BLK_EH_RESET_TIMER race condition in the commit message. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: "jianchao.wang" <jianchao.w.wang@oracle.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Bart Van Assche <Bart.VanAssche@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-09 16:29:48 +00:00
* This is the only place where a request is marked in-flight. If
* the timeout path reads an in-flight @rq->gstate, the
* @rq->deadline it reads together under @rq->gstate_seq is
* guaranteed to be the matching one.
*/
blk-mq: replace timeout synchronization with a RCU and generation based scheme Currently, blk-mq timeout path synchronizes against the usual issue/completion path using a complex scheme involving atomic bitflags, REQ_ATOM_*, memory barriers and subtle memory coherence rules. Unfortunately, it contains quite a few holes. There's a complex dancing around REQ_ATOM_STARTED and REQ_ATOM_COMPLETE between issue/completion and timeout paths; however, they don't have a synchronization point across request recycle instances and it isn't clear what the barriers add. blk_mq_check_expired() can easily read STARTED from N-2'th iteration, deadline from N-1'th, blk_mark_rq_complete() against Nth instance. In fact, it's pretty easy to make blk_mq_check_expired() terminate a later instance of a request. If we induce 5 sec delay before time_after_eq() test in blk_mq_check_expired(), shorten the timeout to 2s, and issue back-to-back large IOs, blk-mq starts timing out requests spuriously pretty quickly. Nothing actually timed out. It just made the call on a recycle instance of a request and then terminated a later instance long after the original instance finished. The scenario isn't theoretical either. This patch replaces the broken synchronization mechanism with a RCU and generation number based one. 1. Each request has a u64 generation + state value, which can be updated only by the request owner. Whenever a request becomes in-flight, the generation number gets bumped up too. This provides the basis for the timeout path to distinguish different recycle instances of the request. Also, marking a request in-flight and setting its deadline are protected with a seqcount so that the timeout path can fetch both values coherently. 2. The timeout path fetches the generation, state and deadline. If the verdict is timeout, it records the generation into a dedicated request abortion field and does RCU wait. 3. The completion path is also protected by RCU (from the previous patch) and checks whether the current generation number and state match the abortion field. If so, it skips completion. 4. The timeout path, after RCU wait, scans requests again and terminates the ones whose generation and state still match the ones requested for abortion. By now, the timeout path knows that either the generation number and state changed if it lost the race or the completion will yield to it and can safely timeout the request. While it's more lines of code, it's conceptually simpler, doesn't depend on direct use of subtle memory ordering or coherence, and hopefully doesn't terminate the wrong instance. While this change makes REQ_ATOM_COMPLETE synchronization unnecessary between issue/complete and timeout paths, REQ_ATOM_COMPLETE isn't removed yet as it's still used in other places. Future patches will move all state tracking to the new mechanism and remove all bitops in the hot paths. Note that this patch adds a comment explaining a race condition in BLK_EH_RESET_TIMER path. The race has always been there and this patch doesn't change it. It's just documenting the existing race. v2: - Fixed BLK_EH_RESET_TIMER handling as pointed out by Jianchao. - s/request->gstate_seqc/request->gstate_seq/ as suggested by Peter. - READ_ONCE() added in blk_mq_rq_update_state() as suggested by Peter. v3: - Fixed possible extended seqcount / u64_stats_sync read looping spotted by Peter. - MQ_RQ_IDLE was incorrectly being set in complete_request instead of free_request. Fixed. v4: - Rebased on top of hctx_lock() refactoring patch. - Added comment explaining the use of hctx_lock() in completion path. v5: - Added comments requested by Bart. - Note the addition of BLK_EH_RESET_TIMER race condition in the commit message. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: "jianchao.wang" <jianchao.w.wang@oracle.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Bart Van Assche <Bart.VanAssche@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-09 16:29:48 +00:00
preempt_disable();
write_seqcount_begin(&rq->gstate_seq);
blk_mq_rq_update_state(rq, MQ_RQ_IN_FLIGHT);
blk_add_timer(rq);
write_seqcount_end(&rq->gstate_seq);
preempt_enable();
if (q->dma_drain_size && blk_rq_bytes(rq)) {
/*
* Make sure space for the drain appears. We know we can do
* this because max_hw_segments has been adjusted to be one
* fewer than the device can handle.
*/
rq->nr_phys_segments++;
}
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
}
EXPORT_SYMBOL(blk_mq_start_request);
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
/*
* When we reach here because queue is busy, it's safe to change the state
* to IDLE without checking @rq->aborted_gstate because we should still be
* holding the RCU read lock and thus protected against timeout.
*/
static void __blk_mq_requeue_request(struct request *rq)
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
{
struct request_queue *q = rq->q;
blk_mq_put_driver_tag(rq);
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
trace_block_rq_requeue(q, rq);
wbt_requeue(q->rq_wb, rq);
if (blk_mq_rq_state(rq) != MQ_RQ_IDLE) {
blk-mq: replace timeout synchronization with a RCU and generation based scheme Currently, blk-mq timeout path synchronizes against the usual issue/completion path using a complex scheme involving atomic bitflags, REQ_ATOM_*, memory barriers and subtle memory coherence rules. Unfortunately, it contains quite a few holes. There's a complex dancing around REQ_ATOM_STARTED and REQ_ATOM_COMPLETE between issue/completion and timeout paths; however, they don't have a synchronization point across request recycle instances and it isn't clear what the barriers add. blk_mq_check_expired() can easily read STARTED from N-2'th iteration, deadline from N-1'th, blk_mark_rq_complete() against Nth instance. In fact, it's pretty easy to make blk_mq_check_expired() terminate a later instance of a request. If we induce 5 sec delay before time_after_eq() test in blk_mq_check_expired(), shorten the timeout to 2s, and issue back-to-back large IOs, blk-mq starts timing out requests spuriously pretty quickly. Nothing actually timed out. It just made the call on a recycle instance of a request and then terminated a later instance long after the original instance finished. The scenario isn't theoretical either. This patch replaces the broken synchronization mechanism with a RCU and generation number based one. 1. Each request has a u64 generation + state value, which can be updated only by the request owner. Whenever a request becomes in-flight, the generation number gets bumped up too. This provides the basis for the timeout path to distinguish different recycle instances of the request. Also, marking a request in-flight and setting its deadline are protected with a seqcount so that the timeout path can fetch both values coherently. 2. The timeout path fetches the generation, state and deadline. If the verdict is timeout, it records the generation into a dedicated request abortion field and does RCU wait. 3. The completion path is also protected by RCU (from the previous patch) and checks whether the current generation number and state match the abortion field. If so, it skips completion. 4. The timeout path, after RCU wait, scans requests again and terminates the ones whose generation and state still match the ones requested for abortion. By now, the timeout path knows that either the generation number and state changed if it lost the race or the completion will yield to it and can safely timeout the request. While it's more lines of code, it's conceptually simpler, doesn't depend on direct use of subtle memory ordering or coherence, and hopefully doesn't terminate the wrong instance. While this change makes REQ_ATOM_COMPLETE synchronization unnecessary between issue/complete and timeout paths, REQ_ATOM_COMPLETE isn't removed yet as it's still used in other places. Future patches will move all state tracking to the new mechanism and remove all bitops in the hot paths. Note that this patch adds a comment explaining a race condition in BLK_EH_RESET_TIMER path. The race has always been there and this patch doesn't change it. It's just documenting the existing race. v2: - Fixed BLK_EH_RESET_TIMER handling as pointed out by Jianchao. - s/request->gstate_seqc/request->gstate_seq/ as suggested by Peter. - READ_ONCE() added in blk_mq_rq_update_state() as suggested by Peter. v3: - Fixed possible extended seqcount / u64_stats_sync read looping spotted by Peter. - MQ_RQ_IDLE was incorrectly being set in complete_request instead of free_request. Fixed. v4: - Rebased on top of hctx_lock() refactoring patch. - Added comment explaining the use of hctx_lock() in completion path. v5: - Added comments requested by Bart. - Note the addition of BLK_EH_RESET_TIMER race condition in the commit message. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: "jianchao.wang" <jianchao.w.wang@oracle.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Bart Van Assche <Bart.VanAssche@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-09 16:29:48 +00:00
blk_mq_rq_update_state(rq, MQ_RQ_IDLE);
if (q->dma_drain_size && blk_rq_bytes(rq))
rq->nr_phys_segments--;
}
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
}
void blk_mq_requeue_request(struct request *rq, bool kick_requeue_list)
{
__blk_mq_requeue_request(rq);
/* this request will be re-inserted to io scheduler queue */
blk_mq_sched_requeue_request(rq);
BUG_ON(blk_queued_rq(rq));
blk_mq_add_to_requeue_list(rq, true, kick_requeue_list);
}
EXPORT_SYMBOL(blk_mq_requeue_request);
static void blk_mq_requeue_work(struct work_struct *work)
{
struct request_queue *q =
container_of(work, struct request_queue, requeue_work.work);
LIST_HEAD(rq_list);
struct request *rq, *next;
spin_lock_irq(&q->requeue_lock);
list_splice_init(&q->requeue_list, &rq_list);
spin_unlock_irq(&q->requeue_lock);
list_for_each_entry_safe(rq, next, &rq_list, queuelist) {
if (!(rq->rq_flags & RQF_SOFTBARRIER))
continue;
rq->rq_flags &= ~RQF_SOFTBARRIER;
list_del_init(&rq->queuelist);
blk_mq_sched_insert_request(rq, true, false, false);
}
while (!list_empty(&rq_list)) {
rq = list_entry(rq_list.next, struct request, queuelist);
list_del_init(&rq->queuelist);
blk_mq_sched_insert_request(rq, false, false, false);
}
blk-mq: Avoid that requeueing starts stopped queues Since blk_mq_requeue_work() starts stopped queues and since execution of this function can be scheduled after a queue has been stopped it is not possible to stop queues without using an additional state variable to track whether or not the queue has been stopped. Hence modify blk_mq_requeue_work() such that it does not start stopped queues. My conclusion after a review of the blk_mq_stop_hw_queues() and blk_mq_{delay_,}kick_requeue_list() callers is as follows: * In the dm driver starting and stopping queues should only happen if __dm_suspend() or __dm_resume() is called and not if the requeue list is processed. * In the SCSI core queue stopping and starting should only be performed by the scsi_internal_device_block() and scsi_internal_device_unblock() functions but not by any other function. Although the blk_mq_stop_hw_queue() call in scsi_queue_rq() may help to reduce CPU load if a LLD queue is full, figuring out whether or not a queue should be restarted when requeueing a command would require to introduce additional locking in scsi_mq_requeue_cmd() to avoid a race with scsi_internal_device_block(). Avoid this complexity by removing the blk_mq_stop_hw_queue() call from scsi_queue_rq(). * In the NVMe core only the functions that call blk_mq_start_stopped_hw_queues() explicitly should start stopped queues. * A blk_mq_start_stopped_hwqueues() call must be added in the xen-blkfront driver in its blkif_recover() function. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Roger Pau Monné <roger.pau@citrix.com> Cc: Mike Snitzer <snitzer@redhat.com> Cc: James Bottomley <jejb@linux.vnet.ibm.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-10-29 00:20:32 +00:00
blk_mq_run_hw_queues(q, false);
}
void blk_mq_add_to_requeue_list(struct request *rq, bool at_head,
bool kick_requeue_list)
{
struct request_queue *q = rq->q;
unsigned long flags;
/*
* We abuse this flag that is otherwise used by the I/O scheduler to
* request head insertion from the workqueue.
*/
BUG_ON(rq->rq_flags & RQF_SOFTBARRIER);
spin_lock_irqsave(&q->requeue_lock, flags);
if (at_head) {
rq->rq_flags |= RQF_SOFTBARRIER;
list_add(&rq->queuelist, &q->requeue_list);
} else {
list_add_tail(&rq->queuelist, &q->requeue_list);
}
spin_unlock_irqrestore(&q->requeue_lock, flags);
if (kick_requeue_list)
blk_mq_kick_requeue_list(q);
}
EXPORT_SYMBOL(blk_mq_add_to_requeue_list);
void blk_mq_kick_requeue_list(struct request_queue *q)
{
kblockd_mod_delayed_work_on(WORK_CPU_UNBOUND, &q->requeue_work, 0);
}
EXPORT_SYMBOL(blk_mq_kick_requeue_list);
void blk_mq_delay_kick_requeue_list(struct request_queue *q,
unsigned long msecs)
{
kblockd_mod_delayed_work_on(WORK_CPU_UNBOUND, &q->requeue_work,
msecs_to_jiffies(msecs));
}
EXPORT_SYMBOL(blk_mq_delay_kick_requeue_list);
struct request *blk_mq_tag_to_rq(struct blk_mq_tags *tags, unsigned int tag)
{
if (tag < tags->nr_tags) {
prefetch(tags->rqs[tag]);
return tags->rqs[tag];
}
return NULL;
}
EXPORT_SYMBOL(blk_mq_tag_to_rq);
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
struct blk_mq_timeout_data {
unsigned long next;
unsigned int next_set;
blk-mq: replace timeout synchronization with a RCU and generation based scheme Currently, blk-mq timeout path synchronizes against the usual issue/completion path using a complex scheme involving atomic bitflags, REQ_ATOM_*, memory barriers and subtle memory coherence rules. Unfortunately, it contains quite a few holes. There's a complex dancing around REQ_ATOM_STARTED and REQ_ATOM_COMPLETE between issue/completion and timeout paths; however, they don't have a synchronization point across request recycle instances and it isn't clear what the barriers add. blk_mq_check_expired() can easily read STARTED from N-2'th iteration, deadline from N-1'th, blk_mark_rq_complete() against Nth instance. In fact, it's pretty easy to make blk_mq_check_expired() terminate a later instance of a request. If we induce 5 sec delay before time_after_eq() test in blk_mq_check_expired(), shorten the timeout to 2s, and issue back-to-back large IOs, blk-mq starts timing out requests spuriously pretty quickly. Nothing actually timed out. It just made the call on a recycle instance of a request and then terminated a later instance long after the original instance finished. The scenario isn't theoretical either. This patch replaces the broken synchronization mechanism with a RCU and generation number based one. 1. Each request has a u64 generation + state value, which can be updated only by the request owner. Whenever a request becomes in-flight, the generation number gets bumped up too. This provides the basis for the timeout path to distinguish different recycle instances of the request. Also, marking a request in-flight and setting its deadline are protected with a seqcount so that the timeout path can fetch both values coherently. 2. The timeout path fetches the generation, state and deadline. If the verdict is timeout, it records the generation into a dedicated request abortion field and does RCU wait. 3. The completion path is also protected by RCU (from the previous patch) and checks whether the current generation number and state match the abortion field. If so, it skips completion. 4. The timeout path, after RCU wait, scans requests again and terminates the ones whose generation and state still match the ones requested for abortion. By now, the timeout path knows that either the generation number and state changed if it lost the race or the completion will yield to it and can safely timeout the request. While it's more lines of code, it's conceptually simpler, doesn't depend on direct use of subtle memory ordering or coherence, and hopefully doesn't terminate the wrong instance. While this change makes REQ_ATOM_COMPLETE synchronization unnecessary between issue/complete and timeout paths, REQ_ATOM_COMPLETE isn't removed yet as it's still used in other places. Future patches will move all state tracking to the new mechanism and remove all bitops in the hot paths. Note that this patch adds a comment explaining a race condition in BLK_EH_RESET_TIMER path. The race has always been there and this patch doesn't change it. It's just documenting the existing race. v2: - Fixed BLK_EH_RESET_TIMER handling as pointed out by Jianchao. - s/request->gstate_seqc/request->gstate_seq/ as suggested by Peter. - READ_ONCE() added in blk_mq_rq_update_state() as suggested by Peter. v3: - Fixed possible extended seqcount / u64_stats_sync read looping spotted by Peter. - MQ_RQ_IDLE was incorrectly being set in complete_request instead of free_request. Fixed. v4: - Rebased on top of hctx_lock() refactoring patch. - Added comment explaining the use of hctx_lock() in completion path. v5: - Added comments requested by Bart. - Note the addition of BLK_EH_RESET_TIMER race condition in the commit message. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: "jianchao.wang" <jianchao.w.wang@oracle.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Bart Van Assche <Bart.VanAssche@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-09 16:29:48 +00:00
unsigned int nr_expired;
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
};
static void blk_mq_rq_timed_out(struct request *req, bool reserved)
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
{
const struct blk_mq_ops *ops = req->q->mq_ops;
enum blk_eh_timer_return ret = BLK_EH_RESET_TIMER;
req->rq_flags |= RQF_MQ_TIMEOUT_EXPIRED;
if (ops->timeout)
ret = ops->timeout(req, reserved);
switch (ret) {
case BLK_EH_HANDLED:
__blk_mq_complete_request(req);
break;
case BLK_EH_RESET_TIMER:
blk-mq: replace timeout synchronization with a RCU and generation based scheme Currently, blk-mq timeout path synchronizes against the usual issue/completion path using a complex scheme involving atomic bitflags, REQ_ATOM_*, memory barriers and subtle memory coherence rules. Unfortunately, it contains quite a few holes. There's a complex dancing around REQ_ATOM_STARTED and REQ_ATOM_COMPLETE between issue/completion and timeout paths; however, they don't have a synchronization point across request recycle instances and it isn't clear what the barriers add. blk_mq_check_expired() can easily read STARTED from N-2'th iteration, deadline from N-1'th, blk_mark_rq_complete() against Nth instance. In fact, it's pretty easy to make blk_mq_check_expired() terminate a later instance of a request. If we induce 5 sec delay before time_after_eq() test in blk_mq_check_expired(), shorten the timeout to 2s, and issue back-to-back large IOs, blk-mq starts timing out requests spuriously pretty quickly. Nothing actually timed out. It just made the call on a recycle instance of a request and then terminated a later instance long after the original instance finished. The scenario isn't theoretical either. This patch replaces the broken synchronization mechanism with a RCU and generation number based one. 1. Each request has a u64 generation + state value, which can be updated only by the request owner. Whenever a request becomes in-flight, the generation number gets bumped up too. This provides the basis for the timeout path to distinguish different recycle instances of the request. Also, marking a request in-flight and setting its deadline are protected with a seqcount so that the timeout path can fetch both values coherently. 2. The timeout path fetches the generation, state and deadline. If the verdict is timeout, it records the generation into a dedicated request abortion field and does RCU wait. 3. The completion path is also protected by RCU (from the previous patch) and checks whether the current generation number and state match the abortion field. If so, it skips completion. 4. The timeout path, after RCU wait, scans requests again and terminates the ones whose generation and state still match the ones requested for abortion. By now, the timeout path knows that either the generation number and state changed if it lost the race or the completion will yield to it and can safely timeout the request. While it's more lines of code, it's conceptually simpler, doesn't depend on direct use of subtle memory ordering or coherence, and hopefully doesn't terminate the wrong instance. While this change makes REQ_ATOM_COMPLETE synchronization unnecessary between issue/complete and timeout paths, REQ_ATOM_COMPLETE isn't removed yet as it's still used in other places. Future patches will move all state tracking to the new mechanism and remove all bitops in the hot paths. Note that this patch adds a comment explaining a race condition in BLK_EH_RESET_TIMER path. The race has always been there and this patch doesn't change it. It's just documenting the existing race. v2: - Fixed BLK_EH_RESET_TIMER handling as pointed out by Jianchao. - s/request->gstate_seqc/request->gstate_seq/ as suggested by Peter. - READ_ONCE() added in blk_mq_rq_update_state() as suggested by Peter. v3: - Fixed possible extended seqcount / u64_stats_sync read looping spotted by Peter. - MQ_RQ_IDLE was incorrectly being set in complete_request instead of free_request. Fixed. v4: - Rebased on top of hctx_lock() refactoring patch. - Added comment explaining the use of hctx_lock() in completion path. v5: - Added comments requested by Bart. - Note the addition of BLK_EH_RESET_TIMER race condition in the commit message. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: "jianchao.wang" <jianchao.w.wang@oracle.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Bart Van Assche <Bart.VanAssche@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-09 16:29:48 +00:00
/*
* As nothing prevents from completion happening while
* ->aborted_gstate is set, this may lead to ignored
* completions and further spurious timeouts.
*/
blk_mq_rq_update_aborted_gstate(req, 0);
blk_add_timer(req);
break;
case BLK_EH_NOT_HANDLED:
break;
default:
printk(KERN_ERR "block: bad eh return: %d\n", ret);
break;
}
}
static void blk_mq_check_expired(struct blk_mq_hw_ctx *hctx,
struct request *rq, void *priv, bool reserved)
{
struct blk_mq_timeout_data *data = priv;
blk-mq: replace timeout synchronization with a RCU and generation based scheme Currently, blk-mq timeout path synchronizes against the usual issue/completion path using a complex scheme involving atomic bitflags, REQ_ATOM_*, memory barriers and subtle memory coherence rules. Unfortunately, it contains quite a few holes. There's a complex dancing around REQ_ATOM_STARTED and REQ_ATOM_COMPLETE between issue/completion and timeout paths; however, they don't have a synchronization point across request recycle instances and it isn't clear what the barriers add. blk_mq_check_expired() can easily read STARTED from N-2'th iteration, deadline from N-1'th, blk_mark_rq_complete() against Nth instance. In fact, it's pretty easy to make blk_mq_check_expired() terminate a later instance of a request. If we induce 5 sec delay before time_after_eq() test in blk_mq_check_expired(), shorten the timeout to 2s, and issue back-to-back large IOs, blk-mq starts timing out requests spuriously pretty quickly. Nothing actually timed out. It just made the call on a recycle instance of a request and then terminated a later instance long after the original instance finished. The scenario isn't theoretical either. This patch replaces the broken synchronization mechanism with a RCU and generation number based one. 1. Each request has a u64 generation + state value, which can be updated only by the request owner. Whenever a request becomes in-flight, the generation number gets bumped up too. This provides the basis for the timeout path to distinguish different recycle instances of the request. Also, marking a request in-flight and setting its deadline are protected with a seqcount so that the timeout path can fetch both values coherently. 2. The timeout path fetches the generation, state and deadline. If the verdict is timeout, it records the generation into a dedicated request abortion field and does RCU wait. 3. The completion path is also protected by RCU (from the previous patch) and checks whether the current generation number and state match the abortion field. If so, it skips completion. 4. The timeout path, after RCU wait, scans requests again and terminates the ones whose generation and state still match the ones requested for abortion. By now, the timeout path knows that either the generation number and state changed if it lost the race or the completion will yield to it and can safely timeout the request. While it's more lines of code, it's conceptually simpler, doesn't depend on direct use of subtle memory ordering or coherence, and hopefully doesn't terminate the wrong instance. While this change makes REQ_ATOM_COMPLETE synchronization unnecessary between issue/complete and timeout paths, REQ_ATOM_COMPLETE isn't removed yet as it's still used in other places. Future patches will move all state tracking to the new mechanism and remove all bitops in the hot paths. Note that this patch adds a comment explaining a race condition in BLK_EH_RESET_TIMER path. The race has always been there and this patch doesn't change it. It's just documenting the existing race. v2: - Fixed BLK_EH_RESET_TIMER handling as pointed out by Jianchao. - s/request->gstate_seqc/request->gstate_seq/ as suggested by Peter. - READ_ONCE() added in blk_mq_rq_update_state() as suggested by Peter. v3: - Fixed possible extended seqcount / u64_stats_sync read looping spotted by Peter. - MQ_RQ_IDLE was incorrectly being set in complete_request instead of free_request. Fixed. v4: - Rebased on top of hctx_lock() refactoring patch. - Added comment explaining the use of hctx_lock() in completion path. v5: - Added comments requested by Bart. - Note the addition of BLK_EH_RESET_TIMER race condition in the commit message. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: "jianchao.wang" <jianchao.w.wang@oracle.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Bart Van Assche <Bart.VanAssche@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-09 16:29:48 +00:00
unsigned long gstate, deadline;
int start;
blk-mq: replace timeout synchronization with a RCU and generation based scheme Currently, blk-mq timeout path synchronizes against the usual issue/completion path using a complex scheme involving atomic bitflags, REQ_ATOM_*, memory barriers and subtle memory coherence rules. Unfortunately, it contains quite a few holes. There's a complex dancing around REQ_ATOM_STARTED and REQ_ATOM_COMPLETE between issue/completion and timeout paths; however, they don't have a synchronization point across request recycle instances and it isn't clear what the barriers add. blk_mq_check_expired() can easily read STARTED from N-2'th iteration, deadline from N-1'th, blk_mark_rq_complete() against Nth instance. In fact, it's pretty easy to make blk_mq_check_expired() terminate a later instance of a request. If we induce 5 sec delay before time_after_eq() test in blk_mq_check_expired(), shorten the timeout to 2s, and issue back-to-back large IOs, blk-mq starts timing out requests spuriously pretty quickly. Nothing actually timed out. It just made the call on a recycle instance of a request and then terminated a later instance long after the original instance finished. The scenario isn't theoretical either. This patch replaces the broken synchronization mechanism with a RCU and generation number based one. 1. Each request has a u64 generation + state value, which can be updated only by the request owner. Whenever a request becomes in-flight, the generation number gets bumped up too. This provides the basis for the timeout path to distinguish different recycle instances of the request. Also, marking a request in-flight and setting its deadline are protected with a seqcount so that the timeout path can fetch both values coherently. 2. The timeout path fetches the generation, state and deadline. If the verdict is timeout, it records the generation into a dedicated request abortion field and does RCU wait. 3. The completion path is also protected by RCU (from the previous patch) and checks whether the current generation number and state match the abortion field. If so, it skips completion. 4. The timeout path, after RCU wait, scans requests again and terminates the ones whose generation and state still match the ones requested for abortion. By now, the timeout path knows that either the generation number and state changed if it lost the race or the completion will yield to it and can safely timeout the request. While it's more lines of code, it's conceptually simpler, doesn't depend on direct use of subtle memory ordering or coherence, and hopefully doesn't terminate the wrong instance. While this change makes REQ_ATOM_COMPLETE synchronization unnecessary between issue/complete and timeout paths, REQ_ATOM_COMPLETE isn't removed yet as it's still used in other places. Future patches will move all state tracking to the new mechanism and remove all bitops in the hot paths. Note that this patch adds a comment explaining a race condition in BLK_EH_RESET_TIMER path. The race has always been there and this patch doesn't change it. It's just documenting the existing race. v2: - Fixed BLK_EH_RESET_TIMER handling as pointed out by Jianchao. - s/request->gstate_seqc/request->gstate_seq/ as suggested by Peter. - READ_ONCE() added in blk_mq_rq_update_state() as suggested by Peter. v3: - Fixed possible extended seqcount / u64_stats_sync read looping spotted by Peter. - MQ_RQ_IDLE was incorrectly being set in complete_request instead of free_request. Fixed. v4: - Rebased on top of hctx_lock() refactoring patch. - Added comment explaining the use of hctx_lock() in completion path. v5: - Added comments requested by Bart. - Note the addition of BLK_EH_RESET_TIMER race condition in the commit message. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: "jianchao.wang" <jianchao.w.wang@oracle.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Bart Van Assche <Bart.VanAssche@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-09 16:29:48 +00:00
might_sleep();
if (rq->rq_flags & RQF_MQ_TIMEOUT_EXPIRED)
return;
blk-mq: attempt to fix atomic flag memory ordering Attempt to untangle the ordering in blk-mq. The patch introducing the single smp_mb__before_atomic() is obviously broken in that it doesn't clearly specify a pairing barrier and an obtained guarantee. The comment is further misleading in that it hints that the deadline store and the COMPLETE store also need to be ordered, but AFAICT there is no such dependency. However what does appear to be important is the clear happening _after_ the store, and that worked by pure accident. This clarifies blk_mq_start_request() -- we should not get there with STARTING set -- this simplifies the code and makes the barrier usage sane (the old code could be read to allow not having _any_ atomic after the barrier, in which case the barrier hasn't got anything to order). We then also introduce the missing pairing barrier for it. Also down-grade the barrier to smp_wmb(), this is cheaper for PowerPC/ARM and doesn't cost anything extra on x86. And it documents the STARTING vs COMPLETE ordering. Although I've not been entirely successful in reverse engineering the blk-mq state machine so there might still be more funnies around timeout vs requeue. If I got anything wrong, feel free to educate me by adding comments to clarify things ;-) Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Will Deacon <will.deacon@arm.com> Cc: Ming Lei <tom.leiming@gmail.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Andrea Parri <parri.andrea@gmail.com> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Bart Van Assche <bart.vanassche@wdc.com> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Fixes: 538b75341835 ("blk-mq: request deadline must be visible before marking rq as started") Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-09-06 08:00:22 +00:00
blk-mq: replace timeout synchronization with a RCU and generation based scheme Currently, blk-mq timeout path synchronizes against the usual issue/completion path using a complex scheme involving atomic bitflags, REQ_ATOM_*, memory barriers and subtle memory coherence rules. Unfortunately, it contains quite a few holes. There's a complex dancing around REQ_ATOM_STARTED and REQ_ATOM_COMPLETE between issue/completion and timeout paths; however, they don't have a synchronization point across request recycle instances and it isn't clear what the barriers add. blk_mq_check_expired() can easily read STARTED from N-2'th iteration, deadline from N-1'th, blk_mark_rq_complete() against Nth instance. In fact, it's pretty easy to make blk_mq_check_expired() terminate a later instance of a request. If we induce 5 sec delay before time_after_eq() test in blk_mq_check_expired(), shorten the timeout to 2s, and issue back-to-back large IOs, blk-mq starts timing out requests spuriously pretty quickly. Nothing actually timed out. It just made the call on a recycle instance of a request and then terminated a later instance long after the original instance finished. The scenario isn't theoretical either. This patch replaces the broken synchronization mechanism with a RCU and generation number based one. 1. Each request has a u64 generation + state value, which can be updated only by the request owner. Whenever a request becomes in-flight, the generation number gets bumped up too. This provides the basis for the timeout path to distinguish different recycle instances of the request. Also, marking a request in-flight and setting its deadline are protected with a seqcount so that the timeout path can fetch both values coherently. 2. The timeout path fetches the generation, state and deadline. If the verdict is timeout, it records the generation into a dedicated request abortion field and does RCU wait. 3. The completion path is also protected by RCU (from the previous patch) and checks whether the current generation number and state match the abortion field. If so, it skips completion. 4. The timeout path, after RCU wait, scans requests again and terminates the ones whose generation and state still match the ones requested for abortion. By now, the timeout path knows that either the generation number and state changed if it lost the race or the completion will yield to it and can safely timeout the request. While it's more lines of code, it's conceptually simpler, doesn't depend on direct use of subtle memory ordering or coherence, and hopefully doesn't terminate the wrong instance. While this change makes REQ_ATOM_COMPLETE synchronization unnecessary between issue/complete and timeout paths, REQ_ATOM_COMPLETE isn't removed yet as it's still used in other places. Future patches will move all state tracking to the new mechanism and remove all bitops in the hot paths. Note that this patch adds a comment explaining a race condition in BLK_EH_RESET_TIMER path. The race has always been there and this patch doesn't change it. It's just documenting the existing race. v2: - Fixed BLK_EH_RESET_TIMER handling as pointed out by Jianchao. - s/request->gstate_seqc/request->gstate_seq/ as suggested by Peter. - READ_ONCE() added in blk_mq_rq_update_state() as suggested by Peter. v3: - Fixed possible extended seqcount / u64_stats_sync read looping spotted by Peter. - MQ_RQ_IDLE was incorrectly being set in complete_request instead of free_request. Fixed. v4: - Rebased on top of hctx_lock() refactoring patch. - Added comment explaining the use of hctx_lock() in completion path. v5: - Added comments requested by Bart. - Note the addition of BLK_EH_RESET_TIMER race condition in the commit message. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: "jianchao.wang" <jianchao.w.wang@oracle.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Bart Van Assche <Bart.VanAssche@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-09 16:29:48 +00:00
/* read coherent snapshots of @rq->state_gen and @rq->deadline */
while (true) {
start = read_seqcount_begin(&rq->gstate_seq);
gstate = READ_ONCE(rq->gstate);
deadline = blk_rq_deadline(rq);
blk-mq: replace timeout synchronization with a RCU and generation based scheme Currently, blk-mq timeout path synchronizes against the usual issue/completion path using a complex scheme involving atomic bitflags, REQ_ATOM_*, memory barriers and subtle memory coherence rules. Unfortunately, it contains quite a few holes. There's a complex dancing around REQ_ATOM_STARTED and REQ_ATOM_COMPLETE between issue/completion and timeout paths; however, they don't have a synchronization point across request recycle instances and it isn't clear what the barriers add. blk_mq_check_expired() can easily read STARTED from N-2'th iteration, deadline from N-1'th, blk_mark_rq_complete() against Nth instance. In fact, it's pretty easy to make blk_mq_check_expired() terminate a later instance of a request. If we induce 5 sec delay before time_after_eq() test in blk_mq_check_expired(), shorten the timeout to 2s, and issue back-to-back large IOs, blk-mq starts timing out requests spuriously pretty quickly. Nothing actually timed out. It just made the call on a recycle instance of a request and then terminated a later instance long after the original instance finished. The scenario isn't theoretical either. This patch replaces the broken synchronization mechanism with a RCU and generation number based one. 1. Each request has a u64 generation + state value, which can be updated only by the request owner. Whenever a request becomes in-flight, the generation number gets bumped up too. This provides the basis for the timeout path to distinguish different recycle instances of the request. Also, marking a request in-flight and setting its deadline are protected with a seqcount so that the timeout path can fetch both values coherently. 2. The timeout path fetches the generation, state and deadline. If the verdict is timeout, it records the generation into a dedicated request abortion field and does RCU wait. 3. The completion path is also protected by RCU (from the previous patch) and checks whether the current generation number and state match the abortion field. If so, it skips completion. 4. The timeout path, after RCU wait, scans requests again and terminates the ones whose generation and state still match the ones requested for abortion. By now, the timeout path knows that either the generation number and state changed if it lost the race or the completion will yield to it and can safely timeout the request. While it's more lines of code, it's conceptually simpler, doesn't depend on direct use of subtle memory ordering or coherence, and hopefully doesn't terminate the wrong instance. While this change makes REQ_ATOM_COMPLETE synchronization unnecessary between issue/complete and timeout paths, REQ_ATOM_COMPLETE isn't removed yet as it's still used in other places. Future patches will move all state tracking to the new mechanism and remove all bitops in the hot paths. Note that this patch adds a comment explaining a race condition in BLK_EH_RESET_TIMER path. The race has always been there and this patch doesn't change it. It's just documenting the existing race. v2: - Fixed BLK_EH_RESET_TIMER handling as pointed out by Jianchao. - s/request->gstate_seqc/request->gstate_seq/ as suggested by Peter. - READ_ONCE() added in blk_mq_rq_update_state() as suggested by Peter. v3: - Fixed possible extended seqcount / u64_stats_sync read looping spotted by Peter. - MQ_RQ_IDLE was incorrectly being set in complete_request instead of free_request. Fixed. v4: - Rebased on top of hctx_lock() refactoring patch. - Added comment explaining the use of hctx_lock() in completion path. v5: - Added comments requested by Bart. - Note the addition of BLK_EH_RESET_TIMER race condition in the commit message. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: "jianchao.wang" <jianchao.w.wang@oracle.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Bart Van Assche <Bart.VanAssche@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-09 16:29:48 +00:00
if (!read_seqcount_retry(&rq->gstate_seq, start))
break;
cond_resched();
}
blk-mq: attempt to fix atomic flag memory ordering Attempt to untangle the ordering in blk-mq. The patch introducing the single smp_mb__before_atomic() is obviously broken in that it doesn't clearly specify a pairing barrier and an obtained guarantee. The comment is further misleading in that it hints that the deadline store and the COMPLETE store also need to be ordered, but AFAICT there is no such dependency. However what does appear to be important is the clear happening _after_ the store, and that worked by pure accident. This clarifies blk_mq_start_request() -- we should not get there with STARTING set -- this simplifies the code and makes the barrier usage sane (the old code could be read to allow not having _any_ atomic after the barrier, in which case the barrier hasn't got anything to order). We then also introduce the missing pairing barrier for it. Also down-grade the barrier to smp_wmb(), this is cheaper for PowerPC/ARM and doesn't cost anything extra on x86. And it documents the STARTING vs COMPLETE ordering. Although I've not been entirely successful in reverse engineering the blk-mq state machine so there might still be more funnies around timeout vs requeue. If I got anything wrong, feel free to educate me by adding comments to clarify things ;-) Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Will Deacon <will.deacon@arm.com> Cc: Ming Lei <tom.leiming@gmail.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Andrea Parri <parri.andrea@gmail.com> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Bart Van Assche <bart.vanassche@wdc.com> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Fixes: 538b75341835 ("blk-mq: request deadline must be visible before marking rq as started") Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-09-06 08:00:22 +00:00
blk-mq: replace timeout synchronization with a RCU and generation based scheme Currently, blk-mq timeout path synchronizes against the usual issue/completion path using a complex scheme involving atomic bitflags, REQ_ATOM_*, memory barriers and subtle memory coherence rules. Unfortunately, it contains quite a few holes. There's a complex dancing around REQ_ATOM_STARTED and REQ_ATOM_COMPLETE between issue/completion and timeout paths; however, they don't have a synchronization point across request recycle instances and it isn't clear what the barriers add. blk_mq_check_expired() can easily read STARTED from N-2'th iteration, deadline from N-1'th, blk_mark_rq_complete() against Nth instance. In fact, it's pretty easy to make blk_mq_check_expired() terminate a later instance of a request. If we induce 5 sec delay before time_after_eq() test in blk_mq_check_expired(), shorten the timeout to 2s, and issue back-to-back large IOs, blk-mq starts timing out requests spuriously pretty quickly. Nothing actually timed out. It just made the call on a recycle instance of a request and then terminated a later instance long after the original instance finished. The scenario isn't theoretical either. This patch replaces the broken synchronization mechanism with a RCU and generation number based one. 1. Each request has a u64 generation + state value, which can be updated only by the request owner. Whenever a request becomes in-flight, the generation number gets bumped up too. This provides the basis for the timeout path to distinguish different recycle instances of the request. Also, marking a request in-flight and setting its deadline are protected with a seqcount so that the timeout path can fetch both values coherently. 2. The timeout path fetches the generation, state and deadline. If the verdict is timeout, it records the generation into a dedicated request abortion field and does RCU wait. 3. The completion path is also protected by RCU (from the previous patch) and checks whether the current generation number and state match the abortion field. If so, it skips completion. 4. The timeout path, after RCU wait, scans requests again and terminates the ones whose generation and state still match the ones requested for abortion. By now, the timeout path knows that either the generation number and state changed if it lost the race or the completion will yield to it and can safely timeout the request. While it's more lines of code, it's conceptually simpler, doesn't depend on direct use of subtle memory ordering or coherence, and hopefully doesn't terminate the wrong instance. While this change makes REQ_ATOM_COMPLETE synchronization unnecessary between issue/complete and timeout paths, REQ_ATOM_COMPLETE isn't removed yet as it's still used in other places. Future patches will move all state tracking to the new mechanism and remove all bitops in the hot paths. Note that this patch adds a comment explaining a race condition in BLK_EH_RESET_TIMER path. The race has always been there and this patch doesn't change it. It's just documenting the existing race. v2: - Fixed BLK_EH_RESET_TIMER handling as pointed out by Jianchao. - s/request->gstate_seqc/request->gstate_seq/ as suggested by Peter. - READ_ONCE() added in blk_mq_rq_update_state() as suggested by Peter. v3: - Fixed possible extended seqcount / u64_stats_sync read looping spotted by Peter. - MQ_RQ_IDLE was incorrectly being set in complete_request instead of free_request. Fixed. v4: - Rebased on top of hctx_lock() refactoring patch. - Added comment explaining the use of hctx_lock() in completion path. v5: - Added comments requested by Bart. - Note the addition of BLK_EH_RESET_TIMER race condition in the commit message. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: "jianchao.wang" <jianchao.w.wang@oracle.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Bart Van Assche <Bart.VanAssche@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-09 16:29:48 +00:00
/* if in-flight && overdue, mark for abortion */
if ((gstate & MQ_RQ_STATE_MASK) == MQ_RQ_IN_FLIGHT &&
time_after_eq(jiffies, deadline)) {
blk_mq_rq_update_aborted_gstate(rq, gstate);
data->nr_expired++;
hctx->nr_expired++;
blk-mq: attempt to fix atomic flag memory ordering Attempt to untangle the ordering in blk-mq. The patch introducing the single smp_mb__before_atomic() is obviously broken in that it doesn't clearly specify a pairing barrier and an obtained guarantee. The comment is further misleading in that it hints that the deadline store and the COMPLETE store also need to be ordered, but AFAICT there is no such dependency. However what does appear to be important is the clear happening _after_ the store, and that worked by pure accident. This clarifies blk_mq_start_request() -- we should not get there with STARTING set -- this simplifies the code and makes the barrier usage sane (the old code could be read to allow not having _any_ atomic after the barrier, in which case the barrier hasn't got anything to order). We then also introduce the missing pairing barrier for it. Also down-grade the barrier to smp_wmb(), this is cheaper for PowerPC/ARM and doesn't cost anything extra on x86. And it documents the STARTING vs COMPLETE ordering. Although I've not been entirely successful in reverse engineering the blk-mq state machine so there might still be more funnies around timeout vs requeue. If I got anything wrong, feel free to educate me by adding comments to clarify things ;-) Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Will Deacon <will.deacon@arm.com> Cc: Ming Lei <tom.leiming@gmail.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Andrea Parri <parri.andrea@gmail.com> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Bart Van Assche <bart.vanassche@wdc.com> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Fixes: 538b75341835 ("blk-mq: request deadline must be visible before marking rq as started") Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-09-06 08:00:22 +00:00
} else if (!data->next_set || time_after(data->next, deadline)) {
data->next = deadline;
data->next_set = 1;
}
}
blk-mq: replace timeout synchronization with a RCU and generation based scheme Currently, blk-mq timeout path synchronizes against the usual issue/completion path using a complex scheme involving atomic bitflags, REQ_ATOM_*, memory barriers and subtle memory coherence rules. Unfortunately, it contains quite a few holes. There's a complex dancing around REQ_ATOM_STARTED and REQ_ATOM_COMPLETE between issue/completion and timeout paths; however, they don't have a synchronization point across request recycle instances and it isn't clear what the barriers add. blk_mq_check_expired() can easily read STARTED from N-2'th iteration, deadline from N-1'th, blk_mark_rq_complete() against Nth instance. In fact, it's pretty easy to make blk_mq_check_expired() terminate a later instance of a request. If we induce 5 sec delay before time_after_eq() test in blk_mq_check_expired(), shorten the timeout to 2s, and issue back-to-back large IOs, blk-mq starts timing out requests spuriously pretty quickly. Nothing actually timed out. It just made the call on a recycle instance of a request and then terminated a later instance long after the original instance finished. The scenario isn't theoretical either. This patch replaces the broken synchronization mechanism with a RCU and generation number based one. 1. Each request has a u64 generation + state value, which can be updated only by the request owner. Whenever a request becomes in-flight, the generation number gets bumped up too. This provides the basis for the timeout path to distinguish different recycle instances of the request. Also, marking a request in-flight and setting its deadline are protected with a seqcount so that the timeout path can fetch both values coherently. 2. The timeout path fetches the generation, state and deadline. If the verdict is timeout, it records the generation into a dedicated request abortion field and does RCU wait. 3. The completion path is also protected by RCU (from the previous patch) and checks whether the current generation number and state match the abortion field. If so, it skips completion. 4. The timeout path, after RCU wait, scans requests again and terminates the ones whose generation and state still match the ones requested for abortion. By now, the timeout path knows that either the generation number and state changed if it lost the race or the completion will yield to it and can safely timeout the request. While it's more lines of code, it's conceptually simpler, doesn't depend on direct use of subtle memory ordering or coherence, and hopefully doesn't terminate the wrong instance. While this change makes REQ_ATOM_COMPLETE synchronization unnecessary between issue/complete and timeout paths, REQ_ATOM_COMPLETE isn't removed yet as it's still used in other places. Future patches will move all state tracking to the new mechanism and remove all bitops in the hot paths. Note that this patch adds a comment explaining a race condition in BLK_EH_RESET_TIMER path. The race has always been there and this patch doesn't change it. It's just documenting the existing race. v2: - Fixed BLK_EH_RESET_TIMER handling as pointed out by Jianchao. - s/request->gstate_seqc/request->gstate_seq/ as suggested by Peter. - READ_ONCE() added in blk_mq_rq_update_state() as suggested by Peter. v3: - Fixed possible extended seqcount / u64_stats_sync read looping spotted by Peter. - MQ_RQ_IDLE was incorrectly being set in complete_request instead of free_request. Fixed. v4: - Rebased on top of hctx_lock() refactoring patch. - Added comment explaining the use of hctx_lock() in completion path. v5: - Added comments requested by Bart. - Note the addition of BLK_EH_RESET_TIMER race condition in the commit message. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: "jianchao.wang" <jianchao.w.wang@oracle.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Bart Van Assche <Bart.VanAssche@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-09 16:29:48 +00:00
static void blk_mq_terminate_expired(struct blk_mq_hw_ctx *hctx,
struct request *rq, void *priv, bool reserved)
{
/*
* We marked @rq->aborted_gstate and waited for RCU. If there were
* completions that we lost to, they would have finished and
* updated @rq->gstate by now; otherwise, the completion path is
* now guaranteed to see @rq->aborted_gstate and yield. If
* @rq->aborted_gstate still matches @rq->gstate, @rq is ours.
*/
if (!(rq->rq_flags & RQF_MQ_TIMEOUT_EXPIRED) &&
READ_ONCE(rq->gstate) == rq->aborted_gstate)
blk-mq: replace timeout synchronization with a RCU and generation based scheme Currently, blk-mq timeout path synchronizes against the usual issue/completion path using a complex scheme involving atomic bitflags, REQ_ATOM_*, memory barriers and subtle memory coherence rules. Unfortunately, it contains quite a few holes. There's a complex dancing around REQ_ATOM_STARTED and REQ_ATOM_COMPLETE between issue/completion and timeout paths; however, they don't have a synchronization point across request recycle instances and it isn't clear what the barriers add. blk_mq_check_expired() can easily read STARTED from N-2'th iteration, deadline from N-1'th, blk_mark_rq_complete() against Nth instance. In fact, it's pretty easy to make blk_mq_check_expired() terminate a later instance of a request. If we induce 5 sec delay before time_after_eq() test in blk_mq_check_expired(), shorten the timeout to 2s, and issue back-to-back large IOs, blk-mq starts timing out requests spuriously pretty quickly. Nothing actually timed out. It just made the call on a recycle instance of a request and then terminated a later instance long after the original instance finished. The scenario isn't theoretical either. This patch replaces the broken synchronization mechanism with a RCU and generation number based one. 1. Each request has a u64 generation + state value, which can be updated only by the request owner. Whenever a request becomes in-flight, the generation number gets bumped up too. This provides the basis for the timeout path to distinguish different recycle instances of the request. Also, marking a request in-flight and setting its deadline are protected with a seqcount so that the timeout path can fetch both values coherently. 2. The timeout path fetches the generation, state and deadline. If the verdict is timeout, it records the generation into a dedicated request abortion field and does RCU wait. 3. The completion path is also protected by RCU (from the previous patch) and checks whether the current generation number and state match the abortion field. If so, it skips completion. 4. The timeout path, after RCU wait, scans requests again and terminates the ones whose generation and state still match the ones requested for abortion. By now, the timeout path knows that either the generation number and state changed if it lost the race or the completion will yield to it and can safely timeout the request. While it's more lines of code, it's conceptually simpler, doesn't depend on direct use of subtle memory ordering or coherence, and hopefully doesn't terminate the wrong instance. While this change makes REQ_ATOM_COMPLETE synchronization unnecessary between issue/complete and timeout paths, REQ_ATOM_COMPLETE isn't removed yet as it's still used in other places. Future patches will move all state tracking to the new mechanism and remove all bitops in the hot paths. Note that this patch adds a comment explaining a race condition in BLK_EH_RESET_TIMER path. The race has always been there and this patch doesn't change it. It's just documenting the existing race. v2: - Fixed BLK_EH_RESET_TIMER handling as pointed out by Jianchao. - s/request->gstate_seqc/request->gstate_seq/ as suggested by Peter. - READ_ONCE() added in blk_mq_rq_update_state() as suggested by Peter. v3: - Fixed possible extended seqcount / u64_stats_sync read looping spotted by Peter. - MQ_RQ_IDLE was incorrectly being set in complete_request instead of free_request. Fixed. v4: - Rebased on top of hctx_lock() refactoring patch. - Added comment explaining the use of hctx_lock() in completion path. v5: - Added comments requested by Bart. - Note the addition of BLK_EH_RESET_TIMER race condition in the commit message. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: "jianchao.wang" <jianchao.w.wang@oracle.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Bart Van Assche <Bart.VanAssche@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-09 16:29:48 +00:00
blk_mq_rq_timed_out(rq, reserved);
}
static void blk_mq_timeout_work(struct work_struct *work)
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
{
struct request_queue *q =
container_of(work, struct request_queue, timeout_work);
struct blk_mq_timeout_data data = {
.next = 0,
.next_set = 0,
blk-mq: replace timeout synchronization with a RCU and generation based scheme Currently, blk-mq timeout path synchronizes against the usual issue/completion path using a complex scheme involving atomic bitflags, REQ_ATOM_*, memory barriers and subtle memory coherence rules. Unfortunately, it contains quite a few holes. There's a complex dancing around REQ_ATOM_STARTED and REQ_ATOM_COMPLETE between issue/completion and timeout paths; however, they don't have a synchronization point across request recycle instances and it isn't clear what the barriers add. blk_mq_check_expired() can easily read STARTED from N-2'th iteration, deadline from N-1'th, blk_mark_rq_complete() against Nth instance. In fact, it's pretty easy to make blk_mq_check_expired() terminate a later instance of a request. If we induce 5 sec delay before time_after_eq() test in blk_mq_check_expired(), shorten the timeout to 2s, and issue back-to-back large IOs, blk-mq starts timing out requests spuriously pretty quickly. Nothing actually timed out. It just made the call on a recycle instance of a request and then terminated a later instance long after the original instance finished. The scenario isn't theoretical either. This patch replaces the broken synchronization mechanism with a RCU and generation number based one. 1. Each request has a u64 generation + state value, which can be updated only by the request owner. Whenever a request becomes in-flight, the generation number gets bumped up too. This provides the basis for the timeout path to distinguish different recycle instances of the request. Also, marking a request in-flight and setting its deadline are protected with a seqcount so that the timeout path can fetch both values coherently. 2. The timeout path fetches the generation, state and deadline. If the verdict is timeout, it records the generation into a dedicated request abortion field and does RCU wait. 3. The completion path is also protected by RCU (from the previous patch) and checks whether the current generation number and state match the abortion field. If so, it skips completion. 4. The timeout path, after RCU wait, scans requests again and terminates the ones whose generation and state still match the ones requested for abortion. By now, the timeout path knows that either the generation number and state changed if it lost the race or the completion will yield to it and can safely timeout the request. While it's more lines of code, it's conceptually simpler, doesn't depend on direct use of subtle memory ordering or coherence, and hopefully doesn't terminate the wrong instance. While this change makes REQ_ATOM_COMPLETE synchronization unnecessary between issue/complete and timeout paths, REQ_ATOM_COMPLETE isn't removed yet as it's still used in other places. Future patches will move all state tracking to the new mechanism and remove all bitops in the hot paths. Note that this patch adds a comment explaining a race condition in BLK_EH_RESET_TIMER path. The race has always been there and this patch doesn't change it. It's just documenting the existing race. v2: - Fixed BLK_EH_RESET_TIMER handling as pointed out by Jianchao. - s/request->gstate_seqc/request->gstate_seq/ as suggested by Peter. - READ_ONCE() added in blk_mq_rq_update_state() as suggested by Peter. v3: - Fixed possible extended seqcount / u64_stats_sync read looping spotted by Peter. - MQ_RQ_IDLE was incorrectly being set in complete_request instead of free_request. Fixed. v4: - Rebased on top of hctx_lock() refactoring patch. - Added comment explaining the use of hctx_lock() in completion path. v5: - Added comments requested by Bart. - Note the addition of BLK_EH_RESET_TIMER race condition in the commit message. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: "jianchao.wang" <jianchao.w.wang@oracle.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Bart Van Assche <Bart.VanAssche@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-09 16:29:48 +00:00
.nr_expired = 0,
};
blk-mq: replace timeout synchronization with a RCU and generation based scheme Currently, blk-mq timeout path synchronizes against the usual issue/completion path using a complex scheme involving atomic bitflags, REQ_ATOM_*, memory barriers and subtle memory coherence rules. Unfortunately, it contains quite a few holes. There's a complex dancing around REQ_ATOM_STARTED and REQ_ATOM_COMPLETE between issue/completion and timeout paths; however, they don't have a synchronization point across request recycle instances and it isn't clear what the barriers add. blk_mq_check_expired() can easily read STARTED from N-2'th iteration, deadline from N-1'th, blk_mark_rq_complete() against Nth instance. In fact, it's pretty easy to make blk_mq_check_expired() terminate a later instance of a request. If we induce 5 sec delay before time_after_eq() test in blk_mq_check_expired(), shorten the timeout to 2s, and issue back-to-back large IOs, blk-mq starts timing out requests spuriously pretty quickly. Nothing actually timed out. It just made the call on a recycle instance of a request and then terminated a later instance long after the original instance finished. The scenario isn't theoretical either. This patch replaces the broken synchronization mechanism with a RCU and generation number based one. 1. Each request has a u64 generation + state value, which can be updated only by the request owner. Whenever a request becomes in-flight, the generation number gets bumped up too. This provides the basis for the timeout path to distinguish different recycle instances of the request. Also, marking a request in-flight and setting its deadline are protected with a seqcount so that the timeout path can fetch both values coherently. 2. The timeout path fetches the generation, state and deadline. If the verdict is timeout, it records the generation into a dedicated request abortion field and does RCU wait. 3. The completion path is also protected by RCU (from the previous patch) and checks whether the current generation number and state match the abortion field. If so, it skips completion. 4. The timeout path, after RCU wait, scans requests again and terminates the ones whose generation and state still match the ones requested for abortion. By now, the timeout path knows that either the generation number and state changed if it lost the race or the completion will yield to it and can safely timeout the request. While it's more lines of code, it's conceptually simpler, doesn't depend on direct use of subtle memory ordering or coherence, and hopefully doesn't terminate the wrong instance. While this change makes REQ_ATOM_COMPLETE synchronization unnecessary between issue/complete and timeout paths, REQ_ATOM_COMPLETE isn't removed yet as it's still used in other places. Future patches will move all state tracking to the new mechanism and remove all bitops in the hot paths. Note that this patch adds a comment explaining a race condition in BLK_EH_RESET_TIMER path. The race has always been there and this patch doesn't change it. It's just documenting the existing race. v2: - Fixed BLK_EH_RESET_TIMER handling as pointed out by Jianchao. - s/request->gstate_seqc/request->gstate_seq/ as suggested by Peter. - READ_ONCE() added in blk_mq_rq_update_state() as suggested by Peter. v3: - Fixed possible extended seqcount / u64_stats_sync read looping spotted by Peter. - MQ_RQ_IDLE was incorrectly being set in complete_request instead of free_request. Fixed. v4: - Rebased on top of hctx_lock() refactoring patch. - Added comment explaining the use of hctx_lock() in completion path. v5: - Added comments requested by Bart. - Note the addition of BLK_EH_RESET_TIMER race condition in the commit message. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: "jianchao.wang" <jianchao.w.wang@oracle.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Bart Van Assche <Bart.VanAssche@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-09 16:29:48 +00:00
struct blk_mq_hw_ctx *hctx;
int i;
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
blk-mq: Allow timeouts to run while queue is freezing In case a submitted request gets stuck for some reason, the block layer can prevent the request starvation by starting the scheduled timeout work. If this stuck request occurs at the same time another thread has started a queue freeze, the blk_mq_timeout_work will not be able to acquire the queue reference and will return silently, thus not issuing the timeout. But since the request is already holding a q_usage_counter reference and is unable to complete, it will never release its reference, preventing the queue from completing the freeze started by first thread. This puts the request_queue in a hung state, forever waiting for the freeze completion. This was observed while running IO to a NVMe device at the same time we toggled the CPU hotplug code. Eventually, once a request got stuck requiring a timeout during a queue freeze, we saw the CPU Hotplug notification code get stuck inside blk_mq_freeze_queue_wait, as shown in the trace below. [c000000deaf13690] [c000000deaf13738] 0xc000000deaf13738 (unreliable) [c000000deaf13860] [c000000000015ce8] __switch_to+0x1f8/0x350 [c000000deaf138b0] [c000000000ade0e4] __schedule+0x314/0x990 [c000000deaf13940] [c000000000ade7a8] schedule+0x48/0xc0 [c000000deaf13970] [c0000000005492a4] blk_mq_freeze_queue_wait+0x74/0x110 [c000000deaf139e0] [c00000000054b6a8] blk_mq_queue_reinit_notify+0x1a8/0x2e0 [c000000deaf13a40] [c0000000000e7878] notifier_call_chain+0x98/0x100 [c000000deaf13a90] [c0000000000b8e08] cpu_notify_nofail+0x48/0xa0 [c000000deaf13ac0] [c0000000000b92f0] _cpu_down+0x2a0/0x400 [c000000deaf13b90] [c0000000000b94a8] cpu_down+0x58/0xa0 [c000000deaf13bc0] [c0000000006d5dcc] cpu_subsys_offline+0x2c/0x50 [c000000deaf13bf0] [c0000000006cd244] device_offline+0x104/0x140 [c000000deaf13c30] [c0000000006cd40c] online_store+0x6c/0xc0 [c000000deaf13c80] [c0000000006c8c78] dev_attr_store+0x68/0xa0 [c000000deaf13cc0] [c0000000003974d0] sysfs_kf_write+0x80/0xb0 [c000000deaf13d00] [c0000000003963e8] kernfs_fop_write+0x188/0x200 [c000000deaf13d50] [c0000000002e0f6c] __vfs_write+0x6c/0xe0 [c000000deaf13d90] [c0000000002e1ca0] vfs_write+0xc0/0x230 [c000000deaf13de0] [c0000000002e2cdc] SyS_write+0x6c/0x110 [c000000deaf13e30] [c000000000009204] system_call+0x38/0xb4 The fix is to allow the timeout work to execute in the window between dropping the initial refcount reference and the release of the last reference, which actually marks the freeze completion. This can be achieved with percpu_refcount_tryget, which does not require the counter to be alive. This way the timeout work can do it's job and terminate a stuck request even during a freeze, returning its reference and avoiding the deadlock. Allowing the timeout to run is just a part of the fix, since for some devices, we might get stuck again inside the device driver's timeout handler, should it attempt to allocate a new request in that path - which is a quite common action for Abort commands, which need to be sent after a timeout. In NVMe, for instance, we call blk_mq_alloc_request from inside the timeout handler, which will fail during a freeze, since it also tries to acquire a queue reference. I considered a similar change to blk_mq_alloc_request as a generic solution for further device driver hangs, but we can't do that, since it would allow new requests to disturb the freeze process. I thought about creating a new function in the block layer to support unfreezable requests for these occasions, but after working on it for a while, I feel like this should be handled in a per-driver basis. I'm now experimenting with changes to the NVMe timeout path, but I'm open to suggestions of ways to make this generic. Signed-off-by: Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com> Cc: Brian King <brking@linux.vnet.ibm.com> Cc: Keith Busch <keith.busch@intel.com> Cc: linux-nvme@lists.infradead.org Cc: linux-block@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-08-01 14:23:39 +00:00
/* A deadlock might occur if a request is stuck requiring a
* timeout at the same time a queue freeze is waiting
* completion, since the timeout code would not be able to
* acquire the queue reference here.
*
* That's why we don't use blk_queue_enter here; instead, we use
* percpu_ref_tryget directly, because we need to be able to
* obtain a reference even in the short window between the queue
* starting to freeze, by dropping the first reference in
* blk_freeze_queue_start, and the moment the last request is
blk-mq: Allow timeouts to run while queue is freezing In case a submitted request gets stuck for some reason, the block layer can prevent the request starvation by starting the scheduled timeout work. If this stuck request occurs at the same time another thread has started a queue freeze, the blk_mq_timeout_work will not be able to acquire the queue reference and will return silently, thus not issuing the timeout. But since the request is already holding a q_usage_counter reference and is unable to complete, it will never release its reference, preventing the queue from completing the freeze started by first thread. This puts the request_queue in a hung state, forever waiting for the freeze completion. This was observed while running IO to a NVMe device at the same time we toggled the CPU hotplug code. Eventually, once a request got stuck requiring a timeout during a queue freeze, we saw the CPU Hotplug notification code get stuck inside blk_mq_freeze_queue_wait, as shown in the trace below. [c000000deaf13690] [c000000deaf13738] 0xc000000deaf13738 (unreliable) [c000000deaf13860] [c000000000015ce8] __switch_to+0x1f8/0x350 [c000000deaf138b0] [c000000000ade0e4] __schedule+0x314/0x990 [c000000deaf13940] [c000000000ade7a8] schedule+0x48/0xc0 [c000000deaf13970] [c0000000005492a4] blk_mq_freeze_queue_wait+0x74/0x110 [c000000deaf139e0] [c00000000054b6a8] blk_mq_queue_reinit_notify+0x1a8/0x2e0 [c000000deaf13a40] [c0000000000e7878] notifier_call_chain+0x98/0x100 [c000000deaf13a90] [c0000000000b8e08] cpu_notify_nofail+0x48/0xa0 [c000000deaf13ac0] [c0000000000b92f0] _cpu_down+0x2a0/0x400 [c000000deaf13b90] [c0000000000b94a8] cpu_down+0x58/0xa0 [c000000deaf13bc0] [c0000000006d5dcc] cpu_subsys_offline+0x2c/0x50 [c000000deaf13bf0] [c0000000006cd244] device_offline+0x104/0x140 [c000000deaf13c30] [c0000000006cd40c] online_store+0x6c/0xc0 [c000000deaf13c80] [c0000000006c8c78] dev_attr_store+0x68/0xa0 [c000000deaf13cc0] [c0000000003974d0] sysfs_kf_write+0x80/0xb0 [c000000deaf13d00] [c0000000003963e8] kernfs_fop_write+0x188/0x200 [c000000deaf13d50] [c0000000002e0f6c] __vfs_write+0x6c/0xe0 [c000000deaf13d90] [c0000000002e1ca0] vfs_write+0xc0/0x230 [c000000deaf13de0] [c0000000002e2cdc] SyS_write+0x6c/0x110 [c000000deaf13e30] [c000000000009204] system_call+0x38/0xb4 The fix is to allow the timeout work to execute in the window between dropping the initial refcount reference and the release of the last reference, which actually marks the freeze completion. This can be achieved with percpu_refcount_tryget, which does not require the counter to be alive. This way the timeout work can do it's job and terminate a stuck request even during a freeze, returning its reference and avoiding the deadlock. Allowing the timeout to run is just a part of the fix, since for some devices, we might get stuck again inside the device driver's timeout handler, should it attempt to allocate a new request in that path - which is a quite common action for Abort commands, which need to be sent after a timeout. In NVMe, for instance, we call blk_mq_alloc_request from inside the timeout handler, which will fail during a freeze, since it also tries to acquire a queue reference. I considered a similar change to blk_mq_alloc_request as a generic solution for further device driver hangs, but we can't do that, since it would allow new requests to disturb the freeze process. I thought about creating a new function in the block layer to support unfreezable requests for these occasions, but after working on it for a while, I feel like this should be handled in a per-driver basis. I'm now experimenting with changes to the NVMe timeout path, but I'm open to suggestions of ways to make this generic. Signed-off-by: Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com> Cc: Brian King <brking@linux.vnet.ibm.com> Cc: Keith Busch <keith.busch@intel.com> Cc: linux-nvme@lists.infradead.org Cc: linux-block@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-08-01 14:23:39 +00:00
* consumed, marked by the instant q_usage_counter reaches
* zero.
*/
if (!percpu_ref_tryget(&q->q_usage_counter))
return;
blk-mq: replace timeout synchronization with a RCU and generation based scheme Currently, blk-mq timeout path synchronizes against the usual issue/completion path using a complex scheme involving atomic bitflags, REQ_ATOM_*, memory barriers and subtle memory coherence rules. Unfortunately, it contains quite a few holes. There's a complex dancing around REQ_ATOM_STARTED and REQ_ATOM_COMPLETE between issue/completion and timeout paths; however, they don't have a synchronization point across request recycle instances and it isn't clear what the barriers add. blk_mq_check_expired() can easily read STARTED from N-2'th iteration, deadline from N-1'th, blk_mark_rq_complete() against Nth instance. In fact, it's pretty easy to make blk_mq_check_expired() terminate a later instance of a request. If we induce 5 sec delay before time_after_eq() test in blk_mq_check_expired(), shorten the timeout to 2s, and issue back-to-back large IOs, blk-mq starts timing out requests spuriously pretty quickly. Nothing actually timed out. It just made the call on a recycle instance of a request and then terminated a later instance long after the original instance finished. The scenario isn't theoretical either. This patch replaces the broken synchronization mechanism with a RCU and generation number based one. 1. Each request has a u64 generation + state value, which can be updated only by the request owner. Whenever a request becomes in-flight, the generation number gets bumped up too. This provides the basis for the timeout path to distinguish different recycle instances of the request. Also, marking a request in-flight and setting its deadline are protected with a seqcount so that the timeout path can fetch both values coherently. 2. The timeout path fetches the generation, state and deadline. If the verdict is timeout, it records the generation into a dedicated request abortion field and does RCU wait. 3. The completion path is also protected by RCU (from the previous patch) and checks whether the current generation number and state match the abortion field. If so, it skips completion. 4. The timeout path, after RCU wait, scans requests again and terminates the ones whose generation and state still match the ones requested for abortion. By now, the timeout path knows that either the generation number and state changed if it lost the race or the completion will yield to it and can safely timeout the request. While it's more lines of code, it's conceptually simpler, doesn't depend on direct use of subtle memory ordering or coherence, and hopefully doesn't terminate the wrong instance. While this change makes REQ_ATOM_COMPLETE synchronization unnecessary between issue/complete and timeout paths, REQ_ATOM_COMPLETE isn't removed yet as it's still used in other places. Future patches will move all state tracking to the new mechanism and remove all bitops in the hot paths. Note that this patch adds a comment explaining a race condition in BLK_EH_RESET_TIMER path. The race has always been there and this patch doesn't change it. It's just documenting the existing race. v2: - Fixed BLK_EH_RESET_TIMER handling as pointed out by Jianchao. - s/request->gstate_seqc/request->gstate_seq/ as suggested by Peter. - READ_ONCE() added in blk_mq_rq_update_state() as suggested by Peter. v3: - Fixed possible extended seqcount / u64_stats_sync read looping spotted by Peter. - MQ_RQ_IDLE was incorrectly being set in complete_request instead of free_request. Fixed. v4: - Rebased on top of hctx_lock() refactoring patch. - Added comment explaining the use of hctx_lock() in completion path. v5: - Added comments requested by Bart. - Note the addition of BLK_EH_RESET_TIMER race condition in the commit message. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: "jianchao.wang" <jianchao.w.wang@oracle.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Bart Van Assche <Bart.VanAssche@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-09 16:29:48 +00:00
/* scan for the expired ones and set their ->aborted_gstate */
blk_mq_queue_tag_busy_iter(q, blk_mq_check_expired, &data);
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
blk-mq: replace timeout synchronization with a RCU and generation based scheme Currently, blk-mq timeout path synchronizes against the usual issue/completion path using a complex scheme involving atomic bitflags, REQ_ATOM_*, memory barriers and subtle memory coherence rules. Unfortunately, it contains quite a few holes. There's a complex dancing around REQ_ATOM_STARTED and REQ_ATOM_COMPLETE between issue/completion and timeout paths; however, they don't have a synchronization point across request recycle instances and it isn't clear what the barriers add. blk_mq_check_expired() can easily read STARTED from N-2'th iteration, deadline from N-1'th, blk_mark_rq_complete() against Nth instance. In fact, it's pretty easy to make blk_mq_check_expired() terminate a later instance of a request. If we induce 5 sec delay before time_after_eq() test in blk_mq_check_expired(), shorten the timeout to 2s, and issue back-to-back large IOs, blk-mq starts timing out requests spuriously pretty quickly. Nothing actually timed out. It just made the call on a recycle instance of a request and then terminated a later instance long after the original instance finished. The scenario isn't theoretical either. This patch replaces the broken synchronization mechanism with a RCU and generation number based one. 1. Each request has a u64 generation + state value, which can be updated only by the request owner. Whenever a request becomes in-flight, the generation number gets bumped up too. This provides the basis for the timeout path to distinguish different recycle instances of the request. Also, marking a request in-flight and setting its deadline are protected with a seqcount so that the timeout path can fetch both values coherently. 2. The timeout path fetches the generation, state and deadline. If the verdict is timeout, it records the generation into a dedicated request abortion field and does RCU wait. 3. The completion path is also protected by RCU (from the previous patch) and checks whether the current generation number and state match the abortion field. If so, it skips completion. 4. The timeout path, after RCU wait, scans requests again and terminates the ones whose generation and state still match the ones requested for abortion. By now, the timeout path knows that either the generation number and state changed if it lost the race or the completion will yield to it and can safely timeout the request. While it's more lines of code, it's conceptually simpler, doesn't depend on direct use of subtle memory ordering or coherence, and hopefully doesn't terminate the wrong instance. While this change makes REQ_ATOM_COMPLETE synchronization unnecessary between issue/complete and timeout paths, REQ_ATOM_COMPLETE isn't removed yet as it's still used in other places. Future patches will move all state tracking to the new mechanism and remove all bitops in the hot paths. Note that this patch adds a comment explaining a race condition in BLK_EH_RESET_TIMER path. The race has always been there and this patch doesn't change it. It's just documenting the existing race. v2: - Fixed BLK_EH_RESET_TIMER handling as pointed out by Jianchao. - s/request->gstate_seqc/request->gstate_seq/ as suggested by Peter. - READ_ONCE() added in blk_mq_rq_update_state() as suggested by Peter. v3: - Fixed possible extended seqcount / u64_stats_sync read looping spotted by Peter. - MQ_RQ_IDLE was incorrectly being set in complete_request instead of free_request. Fixed. v4: - Rebased on top of hctx_lock() refactoring patch. - Added comment explaining the use of hctx_lock() in completion path. v5: - Added comments requested by Bart. - Note the addition of BLK_EH_RESET_TIMER race condition in the commit message. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: "jianchao.wang" <jianchao.w.wang@oracle.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Bart Van Assche <Bart.VanAssche@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-09 16:29:48 +00:00
if (data.nr_expired) {
bool has_rcu = false;
/*
* Wait till everyone sees ->aborted_gstate. The
* sequential waits for SRCUs aren't ideal. If this ever
* becomes a problem, we can add per-hw_ctx rcu_head and
* wait in parallel.
*/
queue_for_each_hw_ctx(q, hctx, i) {
if (!hctx->nr_expired)
continue;
if (!(hctx->flags & BLK_MQ_F_BLOCKING))
has_rcu = true;
else
synchronize_srcu(hctx->srcu);
blk-mq: replace timeout synchronization with a RCU and generation based scheme Currently, blk-mq timeout path synchronizes against the usual issue/completion path using a complex scheme involving atomic bitflags, REQ_ATOM_*, memory barriers and subtle memory coherence rules. Unfortunately, it contains quite a few holes. There's a complex dancing around REQ_ATOM_STARTED and REQ_ATOM_COMPLETE between issue/completion and timeout paths; however, they don't have a synchronization point across request recycle instances and it isn't clear what the barriers add. blk_mq_check_expired() can easily read STARTED from N-2'th iteration, deadline from N-1'th, blk_mark_rq_complete() against Nth instance. In fact, it's pretty easy to make blk_mq_check_expired() terminate a later instance of a request. If we induce 5 sec delay before time_after_eq() test in blk_mq_check_expired(), shorten the timeout to 2s, and issue back-to-back large IOs, blk-mq starts timing out requests spuriously pretty quickly. Nothing actually timed out. It just made the call on a recycle instance of a request and then terminated a later instance long after the original instance finished. The scenario isn't theoretical either. This patch replaces the broken synchronization mechanism with a RCU and generation number based one. 1. Each request has a u64 generation + state value, which can be updated only by the request owner. Whenever a request becomes in-flight, the generation number gets bumped up too. This provides the basis for the timeout path to distinguish different recycle instances of the request. Also, marking a request in-flight and setting its deadline are protected with a seqcount so that the timeout path can fetch both values coherently. 2. The timeout path fetches the generation, state and deadline. If the verdict is timeout, it records the generation into a dedicated request abortion field and does RCU wait. 3. The completion path is also protected by RCU (from the previous patch) and checks whether the current generation number and state match the abortion field. If so, it skips completion. 4. The timeout path, after RCU wait, scans requests again and terminates the ones whose generation and state still match the ones requested for abortion. By now, the timeout path knows that either the generation number and state changed if it lost the race or the completion will yield to it and can safely timeout the request. While it's more lines of code, it's conceptually simpler, doesn't depend on direct use of subtle memory ordering or coherence, and hopefully doesn't terminate the wrong instance. While this change makes REQ_ATOM_COMPLETE synchronization unnecessary between issue/complete and timeout paths, REQ_ATOM_COMPLETE isn't removed yet as it's still used in other places. Future patches will move all state tracking to the new mechanism and remove all bitops in the hot paths. Note that this patch adds a comment explaining a race condition in BLK_EH_RESET_TIMER path. The race has always been there and this patch doesn't change it. It's just documenting the existing race. v2: - Fixed BLK_EH_RESET_TIMER handling as pointed out by Jianchao. - s/request->gstate_seqc/request->gstate_seq/ as suggested by Peter. - READ_ONCE() added in blk_mq_rq_update_state() as suggested by Peter. v3: - Fixed possible extended seqcount / u64_stats_sync read looping spotted by Peter. - MQ_RQ_IDLE was incorrectly being set in complete_request instead of free_request. Fixed. v4: - Rebased on top of hctx_lock() refactoring patch. - Added comment explaining the use of hctx_lock() in completion path. v5: - Added comments requested by Bart. - Note the addition of BLK_EH_RESET_TIMER race condition in the commit message. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: "jianchao.wang" <jianchao.w.wang@oracle.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Bart Van Assche <Bart.VanAssche@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-09 16:29:48 +00:00
hctx->nr_expired = 0;
}
if (has_rcu)
synchronize_rcu();
/* terminate the ones we won */
blk_mq_queue_tag_busy_iter(q, blk_mq_terminate_expired, NULL);
}
if (data.next_set) {
data.next = blk_rq_timeout(round_jiffies_up(data.next));
mod_timer(&q->timeout, data.next);
} else {
/*
* Request timeouts are handled as a forward rolling timer. If
* we end up here it means that no requests are pending and
* also that no request has been pending for a while. Mark
* each hctx as idle.
*/
queue_for_each_hw_ctx(q, hctx, i) {
/* the hctx may be unmapped, so check it here */
if (blk_mq_hw_queue_mapped(hctx))
blk_mq_tag_idle(hctx);
}
}
blk_queue_exit(q);
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
}
struct flush_busy_ctx_data {
struct blk_mq_hw_ctx *hctx;
struct list_head *list;
};
static bool flush_busy_ctx(struct sbitmap *sb, unsigned int bitnr, void *data)
{
struct flush_busy_ctx_data *flush_data = data;
struct blk_mq_hw_ctx *hctx = flush_data->hctx;
struct blk_mq_ctx *ctx = hctx->ctxs[bitnr];
spin_lock(&ctx->lock);
list_splice_tail_init(&ctx->rq_list, flush_data->list);
sbitmap_clear_bit(sb, bitnr);
spin_unlock(&ctx->lock);
return true;
}
/*
* Process software queues that have been marked busy, splicing them
* to the for-dispatch
*/
void blk_mq_flush_busy_ctxs(struct blk_mq_hw_ctx *hctx, struct list_head *list)
{
struct flush_busy_ctx_data data = {
.hctx = hctx,
.list = list,
};
sbitmap_for_each_set(&hctx->ctx_map, flush_busy_ctx, &data);
}
EXPORT_SYMBOL_GPL(blk_mq_flush_busy_ctxs);
struct dispatch_rq_data {
struct blk_mq_hw_ctx *hctx;
struct request *rq;
};
static bool dispatch_rq_from_ctx(struct sbitmap *sb, unsigned int bitnr,
void *data)
{
struct dispatch_rq_data *dispatch_data = data;
struct blk_mq_hw_ctx *hctx = dispatch_data->hctx;
struct blk_mq_ctx *ctx = hctx->ctxs[bitnr];
spin_lock(&ctx->lock);
if (unlikely(!list_empty(&ctx->rq_list))) {
dispatch_data->rq = list_entry_rq(ctx->rq_list.next);
list_del_init(&dispatch_data->rq->queuelist);
if (list_empty(&ctx->rq_list))
sbitmap_clear_bit(sb, bitnr);
}
spin_unlock(&ctx->lock);
return !dispatch_data->rq;
}
struct request *blk_mq_dequeue_from_ctx(struct blk_mq_hw_ctx *hctx,
struct blk_mq_ctx *start)
{
unsigned off = start ? start->index_hw : 0;
struct dispatch_rq_data data = {
.hctx = hctx,
.rq = NULL,
};
__sbitmap_for_each_set(&hctx->ctx_map, off,
dispatch_rq_from_ctx, &data);
return data.rq;
}
static inline unsigned int queued_to_index(unsigned int queued)
{
if (!queued)
return 0;
return min(BLK_MQ_MAX_DISPATCH_ORDER - 1, ilog2(queued) + 1);
}
bool blk_mq_get_driver_tag(struct request *rq, struct blk_mq_hw_ctx **hctx,
bool wait)
{
struct blk_mq_alloc_data data = {
.q = rq->q,
.hctx = blk_mq_map_queue(rq->q, rq->mq_ctx->cpu),
.flags = wait ? 0 : BLK_MQ_REQ_NOWAIT,
};
might_sleep_if(wait);
if (rq->tag != -1)
goto done;
if (blk_mq_tag_is_reserved(data.hctx->sched_tags, rq->internal_tag))
data.flags |= BLK_MQ_REQ_RESERVED;
rq->tag = blk_mq_get_tag(&data);
if (rq->tag >= 0) {
if (blk_mq_tag_busy(data.hctx)) {
rq->rq_flags |= RQF_MQ_INFLIGHT;
atomic_inc(&data.hctx->nr_active);
}
data.hctx->tags->rqs[rq->tag] = rq;
}
done:
if (hctx)
*hctx = data.hctx;
return rq->tag != -1;
}
static int blk_mq_dispatch_wake(wait_queue_entry_t *wait, unsigned mode,
int flags, void *key)
{
struct blk_mq_hw_ctx *hctx;
hctx = container_of(wait, struct blk_mq_hw_ctx, dispatch_wait);
list_del_init(&wait->entry);
blk_mq_run_hw_queue(hctx, true);
return 1;
}
/*
* Mark us waiting for a tag. For shared tags, this involves hooking us into
* the tag wakeups. For non-shared tags, we can simply mark us needing a
* restart. For both cases, take care to check the condition again after
* marking us as waiting.
*/
static bool blk_mq_mark_tag_wait(struct blk_mq_hw_ctx **hctx,
struct request *rq)
{
struct blk_mq_hw_ctx *this_hctx = *hctx;
struct sbq_wait_state *ws;
wait_queue_entry_t *wait;
bool ret;
if (!(this_hctx->flags & BLK_MQ_F_TAG_SHARED)) {
if (!test_bit(BLK_MQ_S_SCHED_RESTART, &this_hctx->state))
set_bit(BLK_MQ_S_SCHED_RESTART, &this_hctx->state);
/*
* It's possible that a tag was freed in the window between the
* allocation failure and adding the hardware queue to the wait
* queue.
*
* Don't clear RESTART here, someone else could have set it.
* At most this will cost an extra queue run.
*/
return blk_mq_get_driver_tag(rq, hctx, false);
}
wait = &this_hctx->dispatch_wait;
if (!list_empty_careful(&wait->entry))
return false;
spin_lock(&this_hctx->lock);
if (!list_empty(&wait->entry)) {
spin_unlock(&this_hctx->lock);
return false;
}
ws = bt_wait_ptr(&this_hctx->tags->bitmap_tags, this_hctx);
add_wait_queue(&ws->wait, wait);
/*
* It's possible that a tag was freed in the window between the
* allocation failure and adding the hardware queue to the wait
* queue.
*/
ret = blk_mq_get_driver_tag(rq, hctx, false);
if (!ret) {
spin_unlock(&this_hctx->lock);
return false;
}
/*
* We got a tag, remove ourselves from the wait queue to ensure
* someone else gets the wakeup.
*/
spin_lock_irq(&ws->wait.lock);
list_del_init(&wait->entry);
spin_unlock_irq(&ws->wait.lock);
spin_unlock(&this_hctx->lock);
return true;
}
blk-mq: introduce BLK_STS_DEV_RESOURCE This status is returned from driver to block layer if device related resource is unavailable, but driver can guarantee that IO dispatch will be triggered in future when the resource is available. Convert some drivers to return BLK_STS_DEV_RESOURCE. Also, if driver returns BLK_STS_RESOURCE and SCHED_RESTART is set, rerun queue after a delay (BLK_MQ_DELAY_QUEUE) to avoid IO stalls. BLK_MQ_DELAY_QUEUE is 3 ms because both scsi-mq and nvmefc are using that magic value. If a driver can make sure there is in-flight IO, it is safe to return BLK_STS_DEV_RESOURCE because: 1) If all in-flight IOs complete before examining SCHED_RESTART in blk_mq_dispatch_rq_list(), SCHED_RESTART must be cleared, so queue is run immediately in this case by blk_mq_dispatch_rq_list(); 2) if there is any in-flight IO after/when examining SCHED_RESTART in blk_mq_dispatch_rq_list(): - if SCHED_RESTART isn't set, queue is run immediately as handled in 1) - otherwise, this request will be dispatched after any in-flight IO is completed via blk_mq_sched_restart() 3) if SCHED_RESTART is set concurently in context because of BLK_STS_RESOURCE, blk_mq_delay_run_hw_queue() will cover the above two cases and make sure IO hang can be avoided. One invariant is that queue will be rerun if SCHED_RESTART is set. Suggested-by: Jens Axboe <axboe@kernel.dk> Tested-by: Laurence Oberman <loberman@redhat.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-31 03:04:57 +00:00
#define BLK_MQ_RESOURCE_DELAY 3 /* ms units */
bool blk_mq_dispatch_rq_list(struct request_queue *q, struct list_head *list,
bool got_budget)
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
{
struct blk_mq_hw_ctx *hctx;
struct request *rq, *nxt;
bool no_tag = false;
int errors, queued;
blk-mq: introduce BLK_STS_DEV_RESOURCE This status is returned from driver to block layer if device related resource is unavailable, but driver can guarantee that IO dispatch will be triggered in future when the resource is available. Convert some drivers to return BLK_STS_DEV_RESOURCE. Also, if driver returns BLK_STS_RESOURCE and SCHED_RESTART is set, rerun queue after a delay (BLK_MQ_DELAY_QUEUE) to avoid IO stalls. BLK_MQ_DELAY_QUEUE is 3 ms because both scsi-mq and nvmefc are using that magic value. If a driver can make sure there is in-flight IO, it is safe to return BLK_STS_DEV_RESOURCE because: 1) If all in-flight IOs complete before examining SCHED_RESTART in blk_mq_dispatch_rq_list(), SCHED_RESTART must be cleared, so queue is run immediately in this case by blk_mq_dispatch_rq_list(); 2) if there is any in-flight IO after/when examining SCHED_RESTART in blk_mq_dispatch_rq_list(): - if SCHED_RESTART isn't set, queue is run immediately as handled in 1) - otherwise, this request will be dispatched after any in-flight IO is completed via blk_mq_sched_restart() 3) if SCHED_RESTART is set concurently in context because of BLK_STS_RESOURCE, blk_mq_delay_run_hw_queue() will cover the above two cases and make sure IO hang can be avoided. One invariant is that queue will be rerun if SCHED_RESTART is set. Suggested-by: Jens Axboe <axboe@kernel.dk> Tested-by: Laurence Oberman <loberman@redhat.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-31 03:04:57 +00:00
blk_status_t ret = BLK_STS_OK;
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
if (list_empty(list))
return false;
WARN_ON(!list_is_singular(list) && got_budget);
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
/*
* Now process all the entries, sending them to the driver.
*/
errors = queued = 0;
do {
struct blk_mq_queue_data bd;
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
rq = list_first_entry(list, struct request, queuelist);
hctx = blk_mq_map_queue(rq->q, rq->mq_ctx->cpu);
if (!got_budget && !blk_mq_get_dispatch_budget(hctx))
break;
if (!blk_mq_get_driver_tag(rq, NULL, false)) {
/*
* The initial allocation attempt failed, so we need to
* rerun the hardware queue when a tag is freed. The
* waitqueue takes care of that. If the queue is run
* before we add this entry back on the dispatch list,
* we'll re-run it below.
*/
if (!blk_mq_mark_tag_wait(&hctx, rq)) {
blk_mq_put_dispatch_budget(hctx);
/*
* For non-shared tags, the RESTART check
* will suffice.
*/
if (hctx->flags & BLK_MQ_F_TAG_SHARED)
no_tag = true;
break;
}
}
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
list_del_init(&rq->queuelist);
bd.rq = rq;
/*
* Flag last if we have no more requests, or if we have more
* but can't assign a driver tag to it.
*/
if (list_empty(list))
bd.last = true;
else {
nxt = list_first_entry(list, struct request, queuelist);
bd.last = !blk_mq_get_driver_tag(nxt, NULL, false);
}
ret = q->mq_ops->queue_rq(hctx, &bd);
blk-mq: introduce BLK_STS_DEV_RESOURCE This status is returned from driver to block layer if device related resource is unavailable, but driver can guarantee that IO dispatch will be triggered in future when the resource is available. Convert some drivers to return BLK_STS_DEV_RESOURCE. Also, if driver returns BLK_STS_RESOURCE and SCHED_RESTART is set, rerun queue after a delay (BLK_MQ_DELAY_QUEUE) to avoid IO stalls. BLK_MQ_DELAY_QUEUE is 3 ms because both scsi-mq and nvmefc are using that magic value. If a driver can make sure there is in-flight IO, it is safe to return BLK_STS_DEV_RESOURCE because: 1) If all in-flight IOs complete before examining SCHED_RESTART in blk_mq_dispatch_rq_list(), SCHED_RESTART must be cleared, so queue is run immediately in this case by blk_mq_dispatch_rq_list(); 2) if there is any in-flight IO after/when examining SCHED_RESTART in blk_mq_dispatch_rq_list(): - if SCHED_RESTART isn't set, queue is run immediately as handled in 1) - otherwise, this request will be dispatched after any in-flight IO is completed via blk_mq_sched_restart() 3) if SCHED_RESTART is set concurently in context because of BLK_STS_RESOURCE, blk_mq_delay_run_hw_queue() will cover the above two cases and make sure IO hang can be avoided. One invariant is that queue will be rerun if SCHED_RESTART is set. Suggested-by: Jens Axboe <axboe@kernel.dk> Tested-by: Laurence Oberman <loberman@redhat.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-31 03:04:57 +00:00
if (ret == BLK_STS_RESOURCE || ret == BLK_STS_DEV_RESOURCE) {
/*
* If an I/O scheduler has been configured and we got a
* driver tag for the next request already, free it
* again.
*/
if (!list_empty(list)) {
nxt = list_first_entry(list, struct request, queuelist);
blk_mq_put_driver_tag(nxt);
}
list_add(&rq->queuelist, list);
__blk_mq_requeue_request(rq);
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
break;
}
if (unlikely(ret != BLK_STS_OK)) {
errors++;
blk_mq_end_request(rq, BLK_STS_IOERR);
continue;
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
}
queued++;
} while (!list_empty(list));
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
hctx->dispatched[queued_to_index(queued)]++;
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
/*
* Any items that need requeuing? Stuff them into hctx->dispatch,
* that is where we will continue on next queue run.
*/
if (!list_empty(list)) {
blk-mq: introduce BLK_STS_DEV_RESOURCE This status is returned from driver to block layer if device related resource is unavailable, but driver can guarantee that IO dispatch will be triggered in future when the resource is available. Convert some drivers to return BLK_STS_DEV_RESOURCE. Also, if driver returns BLK_STS_RESOURCE and SCHED_RESTART is set, rerun queue after a delay (BLK_MQ_DELAY_QUEUE) to avoid IO stalls. BLK_MQ_DELAY_QUEUE is 3 ms because both scsi-mq and nvmefc are using that magic value. If a driver can make sure there is in-flight IO, it is safe to return BLK_STS_DEV_RESOURCE because: 1) If all in-flight IOs complete before examining SCHED_RESTART in blk_mq_dispatch_rq_list(), SCHED_RESTART must be cleared, so queue is run immediately in this case by blk_mq_dispatch_rq_list(); 2) if there is any in-flight IO after/when examining SCHED_RESTART in blk_mq_dispatch_rq_list(): - if SCHED_RESTART isn't set, queue is run immediately as handled in 1) - otherwise, this request will be dispatched after any in-flight IO is completed via blk_mq_sched_restart() 3) if SCHED_RESTART is set concurently in context because of BLK_STS_RESOURCE, blk_mq_delay_run_hw_queue() will cover the above two cases and make sure IO hang can be avoided. One invariant is that queue will be rerun if SCHED_RESTART is set. Suggested-by: Jens Axboe <axboe@kernel.dk> Tested-by: Laurence Oberman <loberman@redhat.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-31 03:04:57 +00:00
bool needs_restart;
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
spin_lock(&hctx->lock);
list_splice_init(list, &hctx->dispatch);
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
spin_unlock(&hctx->lock);
/*
* If SCHED_RESTART was set by the caller of this function and
* it is no longer set that means that it was cleared by another
* thread and hence that a queue rerun is needed.
*
* If 'no_tag' is set, that means that we failed getting
* a driver tag with an I/O scheduler attached. If our dispatch
* waitqueue is no longer active, ensure that we run the queue
* AFTER adding our entries back to the list.
*
* If no I/O scheduler has been configured it is possible that
* the hardware queue got stopped and restarted before requests
* were pushed back onto the dispatch list. Rerun the queue to
* avoid starvation. Notes:
* - blk_mq_run_hw_queue() checks whether or not a queue has
* been stopped before rerunning a queue.
* - Some but not all block drivers stop a queue before
* returning BLK_STS_RESOURCE. Two exceptions are scsi-mq
* and dm-rq.
blk-mq: introduce BLK_STS_DEV_RESOURCE This status is returned from driver to block layer if device related resource is unavailable, but driver can guarantee that IO dispatch will be triggered in future when the resource is available. Convert some drivers to return BLK_STS_DEV_RESOURCE. Also, if driver returns BLK_STS_RESOURCE and SCHED_RESTART is set, rerun queue after a delay (BLK_MQ_DELAY_QUEUE) to avoid IO stalls. BLK_MQ_DELAY_QUEUE is 3 ms because both scsi-mq and nvmefc are using that magic value. If a driver can make sure there is in-flight IO, it is safe to return BLK_STS_DEV_RESOURCE because: 1) If all in-flight IOs complete before examining SCHED_RESTART in blk_mq_dispatch_rq_list(), SCHED_RESTART must be cleared, so queue is run immediately in this case by blk_mq_dispatch_rq_list(); 2) if there is any in-flight IO after/when examining SCHED_RESTART in blk_mq_dispatch_rq_list(): - if SCHED_RESTART isn't set, queue is run immediately as handled in 1) - otherwise, this request will be dispatched after any in-flight IO is completed via blk_mq_sched_restart() 3) if SCHED_RESTART is set concurently in context because of BLK_STS_RESOURCE, blk_mq_delay_run_hw_queue() will cover the above two cases and make sure IO hang can be avoided. One invariant is that queue will be rerun if SCHED_RESTART is set. Suggested-by: Jens Axboe <axboe@kernel.dk> Tested-by: Laurence Oberman <loberman@redhat.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-31 03:04:57 +00:00
*
* If driver returns BLK_STS_RESOURCE and SCHED_RESTART
* bit is set, run queue after a delay to avoid IO stalls
* that could otherwise occur if the queue is idle.
*/
blk-mq: introduce BLK_STS_DEV_RESOURCE This status is returned from driver to block layer if device related resource is unavailable, but driver can guarantee that IO dispatch will be triggered in future when the resource is available. Convert some drivers to return BLK_STS_DEV_RESOURCE. Also, if driver returns BLK_STS_RESOURCE and SCHED_RESTART is set, rerun queue after a delay (BLK_MQ_DELAY_QUEUE) to avoid IO stalls. BLK_MQ_DELAY_QUEUE is 3 ms because both scsi-mq and nvmefc are using that magic value. If a driver can make sure there is in-flight IO, it is safe to return BLK_STS_DEV_RESOURCE because: 1) If all in-flight IOs complete before examining SCHED_RESTART in blk_mq_dispatch_rq_list(), SCHED_RESTART must be cleared, so queue is run immediately in this case by blk_mq_dispatch_rq_list(); 2) if there is any in-flight IO after/when examining SCHED_RESTART in blk_mq_dispatch_rq_list(): - if SCHED_RESTART isn't set, queue is run immediately as handled in 1) - otherwise, this request will be dispatched after any in-flight IO is completed via blk_mq_sched_restart() 3) if SCHED_RESTART is set concurently in context because of BLK_STS_RESOURCE, blk_mq_delay_run_hw_queue() will cover the above two cases and make sure IO hang can be avoided. One invariant is that queue will be rerun if SCHED_RESTART is set. Suggested-by: Jens Axboe <axboe@kernel.dk> Tested-by: Laurence Oberman <loberman@redhat.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-31 03:04:57 +00:00
needs_restart = blk_mq_sched_needs_restart(hctx);
if (!needs_restart ||
(no_tag && list_empty_careful(&hctx->dispatch_wait.entry)))
blk_mq_run_hw_queue(hctx, true);
blk-mq: introduce BLK_STS_DEV_RESOURCE This status is returned from driver to block layer if device related resource is unavailable, but driver can guarantee that IO dispatch will be triggered in future when the resource is available. Convert some drivers to return BLK_STS_DEV_RESOURCE. Also, if driver returns BLK_STS_RESOURCE and SCHED_RESTART is set, rerun queue after a delay (BLK_MQ_DELAY_QUEUE) to avoid IO stalls. BLK_MQ_DELAY_QUEUE is 3 ms because both scsi-mq and nvmefc are using that magic value. If a driver can make sure there is in-flight IO, it is safe to return BLK_STS_DEV_RESOURCE because: 1) If all in-flight IOs complete before examining SCHED_RESTART in blk_mq_dispatch_rq_list(), SCHED_RESTART must be cleared, so queue is run immediately in this case by blk_mq_dispatch_rq_list(); 2) if there is any in-flight IO after/when examining SCHED_RESTART in blk_mq_dispatch_rq_list(): - if SCHED_RESTART isn't set, queue is run immediately as handled in 1) - otherwise, this request will be dispatched after any in-flight IO is completed via blk_mq_sched_restart() 3) if SCHED_RESTART is set concurently in context because of BLK_STS_RESOURCE, blk_mq_delay_run_hw_queue() will cover the above two cases and make sure IO hang can be avoided. One invariant is that queue will be rerun if SCHED_RESTART is set. Suggested-by: Jens Axboe <axboe@kernel.dk> Tested-by: Laurence Oberman <loberman@redhat.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-31 03:04:57 +00:00
else if (needs_restart && (ret == BLK_STS_RESOURCE))
blk_mq_delay_run_hw_queue(hctx, BLK_MQ_RESOURCE_DELAY);
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
}
return (queued + errors) != 0;
}
static void __blk_mq_run_hw_queue(struct blk_mq_hw_ctx *hctx)
{
int srcu_idx;
/*
* We should be running this queue from one of the CPUs that
* are mapped to it.
*
* There are at least two related races now between setting
* hctx->next_cpu from blk_mq_hctx_next_cpu() and running
* __blk_mq_run_hw_queue():
*
* - hctx->next_cpu is found offline in blk_mq_hctx_next_cpu(),
* but later it becomes online, then this warning is harmless
* at all
*
* - hctx->next_cpu is found online in blk_mq_hctx_next_cpu(),
* but later it becomes offline, then the warning can't be
* triggered, and we depend on blk-mq timeout handler to
* handle dispatched requests to this hctx
*/
if (!cpumask_test_cpu(raw_smp_processor_id(), hctx->cpumask) &&
cpu_online(hctx->next_cpu)) {
printk(KERN_WARNING "run queue from wrong CPU %d, hctx %s\n",
raw_smp_processor_id(),
cpumask_empty(hctx->cpumask) ? "inactive": "active");
dump_stack();
}
/*
* We can't run the queue inline with ints disabled. Ensure that
* we catch bad users of this early.
*/
WARN_ON_ONCE(in_interrupt());
might_sleep_if(hctx->flags & BLK_MQ_F_BLOCKING);
hctx_lock(hctx, &srcu_idx);
blk_mq_sched_dispatch_requests(hctx);
hctx_unlock(hctx, srcu_idx);
}
static inline int blk_mq_first_mapped_cpu(struct blk_mq_hw_ctx *hctx)
{
int cpu = cpumask_first_and(hctx->cpumask, cpu_online_mask);
if (cpu >= nr_cpu_ids)
cpu = cpumask_first(hctx->cpumask);
return cpu;
}
/*
* It'd be great if the workqueue API had a way to pass
* in a mask and had some smarts for more clever placement.
* For now we just round-robin here, switching for every
* BLK_MQ_CPU_WORK_BATCH queued items.
*/
static int blk_mq_hctx_next_cpu(struct blk_mq_hw_ctx *hctx)
{
bool tried = false;
int next_cpu = hctx->next_cpu;
if (hctx->queue->nr_hw_queues == 1)
return WORK_CPU_UNBOUND;
if (--hctx->next_cpu_batch <= 0) {
select_cpu:
next_cpu = cpumask_next_and(next_cpu, hctx->cpumask,
cpu_online_mask);
if (next_cpu >= nr_cpu_ids)
next_cpu = blk_mq_first_mapped_cpu(hctx);
hctx->next_cpu_batch = BLK_MQ_CPU_WORK_BATCH;
}
/*
* Do unbound schedule if we can't find a online CPU for this hctx,
* and it should only happen in the path of handling CPU DEAD.
*/
if (!cpu_online(next_cpu)) {
if (!tried) {
tried = true;
goto select_cpu;
}
/*
* Make sure to re-select CPU next time once after CPUs
* in hctx->cpumask become online again.
*/
hctx->next_cpu = next_cpu;
hctx->next_cpu_batch = 1;
return WORK_CPU_UNBOUND;
}
hctx->next_cpu = next_cpu;
return next_cpu;
}
static void __blk_mq_delay_run_hw_queue(struct blk_mq_hw_ctx *hctx, bool async,
unsigned long msecs)
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
{
if (unlikely(blk_mq_hctx_stopped(hctx)))
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
return;
if (!async && !(hctx->flags & BLK_MQ_F_BLOCKING)) {
int cpu = get_cpu();
if (cpumask_test_cpu(cpu, hctx->cpumask)) {
__blk_mq_run_hw_queue(hctx);
put_cpu();
return;
}
put_cpu();
}
kblockd_mod_delayed_work_on(blk_mq_hctx_next_cpu(hctx), &hctx->run_work,
msecs_to_jiffies(msecs));
}
void blk_mq_delay_run_hw_queue(struct blk_mq_hw_ctx *hctx, unsigned long msecs)
{
__blk_mq_delay_run_hw_queue(hctx, true, msecs);
}
EXPORT_SYMBOL(blk_mq_delay_run_hw_queue);
bool blk_mq_run_hw_queue(struct blk_mq_hw_ctx *hctx, bool async)
{
int srcu_idx;
bool need_run;
/*
* When queue is quiesced, we may be switching io scheduler, or
* updating nr_hw_queues, or other things, and we can't run queue
* any more, even __blk_mq_hctx_has_pending() can't be called safely.
*
* And queue will be rerun in blk_mq_unquiesce_queue() if it is
* quiesced.
*/
hctx_lock(hctx, &srcu_idx);
need_run = !blk_queue_quiesced(hctx->queue) &&
blk_mq_hctx_has_pending(hctx);
hctx_unlock(hctx, srcu_idx);
if (need_run) {
__blk_mq_delay_run_hw_queue(hctx, async, 0);
return true;
}
return false;
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
}
EXPORT_SYMBOL(blk_mq_run_hw_queue);
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
void blk_mq_run_hw_queues(struct request_queue *q, bool async)
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
{
struct blk_mq_hw_ctx *hctx;
int i;
queue_for_each_hw_ctx(q, hctx, i) {
if (blk_mq_hctx_stopped(hctx))
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
continue;
blk_mq_run_hw_queue(hctx, async);
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
}
}
EXPORT_SYMBOL(blk_mq_run_hw_queues);
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
/**
* blk_mq_queue_stopped() - check whether one or more hctxs have been stopped
* @q: request queue.
*
* The caller is responsible for serializing this function against
* blk_mq_{start,stop}_hw_queue().
*/
bool blk_mq_queue_stopped(struct request_queue *q)
{
struct blk_mq_hw_ctx *hctx;
int i;
queue_for_each_hw_ctx(q, hctx, i)
if (blk_mq_hctx_stopped(hctx))
return true;
return false;
}
EXPORT_SYMBOL(blk_mq_queue_stopped);
/*
* This function is often used for pausing .queue_rq() by driver when
* there isn't enough resource or some conditions aren't satisfied, and
* BLK_STS_RESOURCE is usually returned.
*
* We do not guarantee that dispatch can be drained or blocked
* after blk_mq_stop_hw_queue() returns. Please use
* blk_mq_quiesce_queue() for that requirement.
*/
void blk_mq_stop_hw_queue(struct blk_mq_hw_ctx *hctx)
{
cancel_delayed_work(&hctx->run_work);
set_bit(BLK_MQ_S_STOPPED, &hctx->state);
}
EXPORT_SYMBOL(blk_mq_stop_hw_queue);
/*
* This function is often used for pausing .queue_rq() by driver when
* there isn't enough resource or some conditions aren't satisfied, and
* BLK_STS_RESOURCE is usually returned.
*
* We do not guarantee that dispatch can be drained or blocked
* after blk_mq_stop_hw_queues() returns. Please use
* blk_mq_quiesce_queue() for that requirement.
*/
void blk_mq_stop_hw_queues(struct request_queue *q)
{
struct blk_mq_hw_ctx *hctx;
int i;
queue_for_each_hw_ctx(q, hctx, i)
blk_mq_stop_hw_queue(hctx);
}
EXPORT_SYMBOL(blk_mq_stop_hw_queues);
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
void blk_mq_start_hw_queue(struct blk_mq_hw_ctx *hctx)
{
clear_bit(BLK_MQ_S_STOPPED, &hctx->state);
blk_mq_run_hw_queue(hctx, false);
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
}
EXPORT_SYMBOL(blk_mq_start_hw_queue);
void blk_mq_start_hw_queues(struct request_queue *q)
{
struct blk_mq_hw_ctx *hctx;
int i;
queue_for_each_hw_ctx(q, hctx, i)
blk_mq_start_hw_queue(hctx);
}
EXPORT_SYMBOL(blk_mq_start_hw_queues);
void blk_mq_start_stopped_hw_queue(struct blk_mq_hw_ctx *hctx, bool async)
{
if (!blk_mq_hctx_stopped(hctx))
return;
clear_bit(BLK_MQ_S_STOPPED, &hctx->state);
blk_mq_run_hw_queue(hctx, async);
}
EXPORT_SYMBOL_GPL(blk_mq_start_stopped_hw_queue);
void blk_mq_start_stopped_hw_queues(struct request_queue *q, bool async)
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
{
struct blk_mq_hw_ctx *hctx;
int i;
queue_for_each_hw_ctx(q, hctx, i)
blk_mq_start_stopped_hw_queue(hctx, async);
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
}
EXPORT_SYMBOL(blk_mq_start_stopped_hw_queues);
static void blk_mq_run_work_fn(struct work_struct *work)
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
{
struct blk_mq_hw_ctx *hctx;
hctx = container_of(work, struct blk_mq_hw_ctx, run_work.work);
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
/*
* If we are stopped, don't run the queue.
*/
if (test_bit(BLK_MQ_S_STOPPED, &hctx->state))
clear_bit(BLK_MQ_S_STOPPED, &hctx->state);
__blk_mq_run_hw_queue(hctx);
}
static inline void __blk_mq_insert_req_list(struct blk_mq_hw_ctx *hctx,
struct request *rq,
bool at_head)
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
{
struct blk_mq_ctx *ctx = rq->mq_ctx;
lockdep_assert_held(&ctx->lock);
trace_block_rq_insert(hctx->queue, rq);
if (at_head)
list_add(&rq->queuelist, &ctx->rq_list);
else
list_add_tail(&rq->queuelist, &ctx->rq_list);
}
void __blk_mq_insert_request(struct blk_mq_hw_ctx *hctx, struct request *rq,
bool at_head)
{
struct blk_mq_ctx *ctx = rq->mq_ctx;
lockdep_assert_held(&ctx->lock);
__blk_mq_insert_req_list(hctx, rq, at_head);
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
blk_mq_hctx_mark_pending(hctx, ctx);
}
block: directly insert blk-mq request from blk_insert_cloned_request() A NULL pointer crash was reported for the case of having the BFQ IO scheduler attached to the underlying blk-mq paths of a DM multipath device. The crash occured in blk_mq_sched_insert_request()'s call to e->type->ops.mq.insert_requests(). Paolo Valente correctly summarized why the crash occured with: "the call chain (dm_mq_queue_rq -> map_request -> setup_clone -> blk_rq_prep_clone) creates a cloned request without invoking e->type->ops.mq.prepare_request for the target elevator e. The cloned request is therefore not initialized for the scheduler, but it is however inserted into the scheduler by blk_mq_sched_insert_request." All said, a request-based DM multipath device's IO scheduler should be the only one used -- when the original requests are issued to the underlying paths as cloned requests they are inserted directly in the underlying dispatch queue(s) rather than through an additional elevator. But commit bd166ef18 ("blk-mq-sched: add framework for MQ capable IO schedulers") switched blk_insert_cloned_request() from using blk_mq_insert_request() to blk_mq_sched_insert_request(). Which incorrectly added elevator machinery into a call chain that isn't supposed to have any. To fix this introduce a blk-mq private blk_mq_request_bypass_insert() that blk_insert_cloned_request() calls to insert the request without involving any elevator that may be attached to the cloned request's request_queue. Fixes: bd166ef183c2 ("blk-mq-sched: add framework for MQ capable IO schedulers") Cc: stable@vger.kernel.org Reported-by: Bart Van Assche <Bart.VanAssche@wdc.com> Tested-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-09-11 22:43:57 +00:00
/*
* Should only be used carefully, when the caller knows we want to
* bypass a potential IO scheduler on the target device.
*/
void blk_mq_request_bypass_insert(struct request *rq, bool run_queue)
block: directly insert blk-mq request from blk_insert_cloned_request() A NULL pointer crash was reported for the case of having the BFQ IO scheduler attached to the underlying blk-mq paths of a DM multipath device. The crash occured in blk_mq_sched_insert_request()'s call to e->type->ops.mq.insert_requests(). Paolo Valente correctly summarized why the crash occured with: "the call chain (dm_mq_queue_rq -> map_request -> setup_clone -> blk_rq_prep_clone) creates a cloned request without invoking e->type->ops.mq.prepare_request for the target elevator e. The cloned request is therefore not initialized for the scheduler, but it is however inserted into the scheduler by blk_mq_sched_insert_request." All said, a request-based DM multipath device's IO scheduler should be the only one used -- when the original requests are issued to the underlying paths as cloned requests they are inserted directly in the underlying dispatch queue(s) rather than through an additional elevator. But commit bd166ef18 ("blk-mq-sched: add framework for MQ capable IO schedulers") switched blk_insert_cloned_request() from using blk_mq_insert_request() to blk_mq_sched_insert_request(). Which incorrectly added elevator machinery into a call chain that isn't supposed to have any. To fix this introduce a blk-mq private blk_mq_request_bypass_insert() that blk_insert_cloned_request() calls to insert the request without involving any elevator that may be attached to the cloned request's request_queue. Fixes: bd166ef183c2 ("blk-mq-sched: add framework for MQ capable IO schedulers") Cc: stable@vger.kernel.org Reported-by: Bart Van Assche <Bart.VanAssche@wdc.com> Tested-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-09-11 22:43:57 +00:00
{
struct blk_mq_ctx *ctx = rq->mq_ctx;
struct blk_mq_hw_ctx *hctx = blk_mq_map_queue(rq->q, ctx->cpu);
spin_lock(&hctx->lock);
list_add_tail(&rq->queuelist, &hctx->dispatch);
spin_unlock(&hctx->lock);
if (run_queue)
blk_mq_run_hw_queue(hctx, false);
block: directly insert blk-mq request from blk_insert_cloned_request() A NULL pointer crash was reported for the case of having the BFQ IO scheduler attached to the underlying blk-mq paths of a DM multipath device. The crash occured in blk_mq_sched_insert_request()'s call to e->type->ops.mq.insert_requests(). Paolo Valente correctly summarized why the crash occured with: "the call chain (dm_mq_queue_rq -> map_request -> setup_clone -> blk_rq_prep_clone) creates a cloned request without invoking e->type->ops.mq.prepare_request for the target elevator e. The cloned request is therefore not initialized for the scheduler, but it is however inserted into the scheduler by blk_mq_sched_insert_request." All said, a request-based DM multipath device's IO scheduler should be the only one used -- when the original requests are issued to the underlying paths as cloned requests they are inserted directly in the underlying dispatch queue(s) rather than through an additional elevator. But commit bd166ef18 ("blk-mq-sched: add framework for MQ capable IO schedulers") switched blk_insert_cloned_request() from using blk_mq_insert_request() to blk_mq_sched_insert_request(). Which incorrectly added elevator machinery into a call chain that isn't supposed to have any. To fix this introduce a blk-mq private blk_mq_request_bypass_insert() that blk_insert_cloned_request() calls to insert the request without involving any elevator that may be attached to the cloned request's request_queue. Fixes: bd166ef183c2 ("blk-mq-sched: add framework for MQ capable IO schedulers") Cc: stable@vger.kernel.org Reported-by: Bart Van Assche <Bart.VanAssche@wdc.com> Tested-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-09-11 22:43:57 +00:00
}
void blk_mq_insert_requests(struct blk_mq_hw_ctx *hctx, struct blk_mq_ctx *ctx,
struct list_head *list)
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
{
/*
* preemption doesn't flush plug list, so it's possible ctx->cpu is
* offline now
*/
spin_lock(&ctx->lock);
while (!list_empty(list)) {
struct request *rq;
rq = list_first_entry(list, struct request, queuelist);
BUG_ON(rq->mq_ctx != ctx);
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
list_del_init(&rq->queuelist);
__blk_mq_insert_req_list(hctx, rq, false);
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
}
blk_mq_hctx_mark_pending(hctx, ctx);
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
spin_unlock(&ctx->lock);
}
static int plug_ctx_cmp(void *priv, struct list_head *a, struct list_head *b)
{
struct request *rqa = container_of(a, struct request, queuelist);
struct request *rqb = container_of(b, struct request, queuelist);
return !(rqa->mq_ctx < rqb->mq_ctx ||
(rqa->mq_ctx == rqb->mq_ctx &&
blk_rq_pos(rqa) < blk_rq_pos(rqb)));
}
void blk_mq_flush_plug_list(struct blk_plug *plug, bool from_schedule)
{
struct blk_mq_ctx *this_ctx;
struct request_queue *this_q;
struct request *rq;
LIST_HEAD(list);
LIST_HEAD(ctx_list);
unsigned int depth;
list_splice_init(&plug->mq_list, &list);
list_sort(NULL, &list, plug_ctx_cmp);
this_q = NULL;
this_ctx = NULL;
depth = 0;
while (!list_empty(&list)) {
rq = list_entry_rq(list.next);
list_del_init(&rq->queuelist);
BUG_ON(!rq->q);
if (rq->mq_ctx != this_ctx) {
if (this_ctx) {
trace_block_unplug(this_q, depth, from_schedule);
blk_mq_sched_insert_requests(this_q, this_ctx,
&ctx_list,
from_schedule);
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
}
this_ctx = rq->mq_ctx;
this_q = rq->q;
depth = 0;
}
depth++;
list_add_tail(&rq->queuelist, &ctx_list);
}
/*
* If 'this_ctx' is set, we know we have entries to complete
* on 'ctx_list'. Do those.
*/
if (this_ctx) {
trace_block_unplug(this_q, depth, from_schedule);
blk_mq_sched_insert_requests(this_q, this_ctx, &ctx_list,
from_schedule);
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
}
}
static void blk_mq_bio_to_request(struct request *rq, struct bio *bio)
{
blk_init_request_from_bio(rq, bio);
blk_rq_set_rl(rq, blk_get_rl(rq->q, bio));
blk_account_io_start(rq, true);
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
}
static inline void blk_mq_queue_io(struct blk_mq_hw_ctx *hctx,
struct blk_mq_ctx *ctx,
struct request *rq)
{
spin_lock(&ctx->lock);
__blk_mq_insert_request(hctx, rq, false);
spin_unlock(&ctx->lock);
}
static blk_qc_t request_to_qc_t(struct blk_mq_hw_ctx *hctx, struct request *rq)
{
if (rq->tag != -1)
return blk_tag_to_qc_t(rq->tag, hctx->queue_num, false);
return blk_tag_to_qc_t(rq->internal_tag, hctx->queue_num, true);
}
static blk_status_t __blk_mq_issue_directly(struct blk_mq_hw_ctx *hctx,
struct request *rq,
blk_qc_t *cookie)
{
struct request_queue *q = rq->q;
struct blk_mq_queue_data bd = {
.rq = rq,
.last = true,
};
blk_qc_t new_cookie;
blk_status_t ret;
new_cookie = request_to_qc_t(hctx, rq);
/*
* For OK queue, we are done. For error, caller may kill it.
* Any other error (busy), just add it to our list as we
* previously would have done.
*/
ret = q->mq_ops->queue_rq(hctx, &bd);
switch (ret) {
case BLK_STS_OK:
*cookie = new_cookie;
break;
case BLK_STS_RESOURCE:
blk-mq: introduce BLK_STS_DEV_RESOURCE This status is returned from driver to block layer if device related resource is unavailable, but driver can guarantee that IO dispatch will be triggered in future when the resource is available. Convert some drivers to return BLK_STS_DEV_RESOURCE. Also, if driver returns BLK_STS_RESOURCE and SCHED_RESTART is set, rerun queue after a delay (BLK_MQ_DELAY_QUEUE) to avoid IO stalls. BLK_MQ_DELAY_QUEUE is 3 ms because both scsi-mq and nvmefc are using that magic value. If a driver can make sure there is in-flight IO, it is safe to return BLK_STS_DEV_RESOURCE because: 1) If all in-flight IOs complete before examining SCHED_RESTART in blk_mq_dispatch_rq_list(), SCHED_RESTART must be cleared, so queue is run immediately in this case by blk_mq_dispatch_rq_list(); 2) if there is any in-flight IO after/when examining SCHED_RESTART in blk_mq_dispatch_rq_list(): - if SCHED_RESTART isn't set, queue is run immediately as handled in 1) - otherwise, this request will be dispatched after any in-flight IO is completed via blk_mq_sched_restart() 3) if SCHED_RESTART is set concurently in context because of BLK_STS_RESOURCE, blk_mq_delay_run_hw_queue() will cover the above two cases and make sure IO hang can be avoided. One invariant is that queue will be rerun if SCHED_RESTART is set. Suggested-by: Jens Axboe <axboe@kernel.dk> Tested-by: Laurence Oberman <loberman@redhat.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-31 03:04:57 +00:00
case BLK_STS_DEV_RESOURCE:
__blk_mq_requeue_request(rq);
break;
default:
*cookie = BLK_QC_T_NONE;
break;
}
return ret;
}
static blk_status_t __blk_mq_try_issue_directly(struct blk_mq_hw_ctx *hctx,
struct request *rq,
blk-mq: improve DM's blk-mq IO merging via blk_insert_cloned_request feedback blk_insert_cloned_request() is called in the fast path of a dm-rq driver (e.g. blk-mq request-based DM mpath). blk_insert_cloned_request() uses blk_mq_request_bypass_insert() to directly append the request to the blk-mq hctx->dispatch_list of the underlying queue. 1) This way isn't efficient enough because the hctx spinlock is always used. 2) With blk_insert_cloned_request(), we completely bypass underlying queue's elevator and depend on the upper-level dm-rq driver's elevator to schedule IO. But dm-rq currently can't get the underlying queue's dispatch feedback at all. Without knowing whether a request was issued or not (e.g. due to underlying queue being busy) the dm-rq elevator will not be able to provide effective IO merging (as a side-effect of dm-rq currently blindly destaging a request from its elevator only to requeue it after a delay, which kills any opportunity for merging). This obviously causes very bad sequential IO performance. Fix this by updating blk_insert_cloned_request() to use blk_mq_request_direct_issue(). blk_mq_request_direct_issue() allows a request to be issued directly to the underlying queue and returns the dispatch feedback (blk_status_t). If blk_mq_request_direct_issue() returns BLK_SYS_RESOURCE the dm-rq driver will now use DM_MAPIO_REQUEUE to _not_ destage the request. Whereby preserving the opportunity to merge IO. With this, request-based DM's blk-mq sequential IO performance is vastly improved (as much as 3X in mpath/virtio-scsi testing). Signed-off-by: Ming Lei <ming.lei@redhat.com> [blk-mq.c changes heavily influenced by Ming Lei's initial solution, but they were refactored to make them less fragile and easier to read/review] Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-17 16:25:57 +00:00
blk_qc_t *cookie,
bool bypass_insert)
{
struct request_queue *q = rq->q;
blk-mq: fix direct issue If queue is stopped, we shouldn't dispatch request into driver and hardware, unfortunately the check is removed in bd166ef183c2(blk-mq-sched: add framework for MQ capable IO schedulers). This patch fixes the issue by moving the check back into __blk_mq_try_issue_directly(). This patch fixes request use-after-free[1][2] during canceling requets of NVMe in nvme_dev_disable(), which can be triggered easily during NVMe reset & remove test. [1] oops kernel log when CONFIG_BLK_DEV_INTEGRITY is on [ 103.412969] BUG: unable to handle kernel NULL pointer dereference at 000000000000000a [ 103.412980] IP: bio_integrity_advance+0x48/0xf0 [ 103.412981] PGD 275a88067 [ 103.412981] P4D 275a88067 [ 103.412982] PUD 276c43067 [ 103.412983] PMD 0 [ 103.412984] [ 103.412986] Oops: 0000 [#1] SMP [ 103.412989] Modules linked in: vfat fat intel_rapl sb_edac x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc aesni_intel crypto_simd cryptd ipmi_ssif iTCO_wdt iTCO_vendor_support mxm_wmi glue_helper dcdbas ipmi_si mei_me pcspkr mei sg ipmi_devintf lpc_ich ipmi_msghandler shpchp acpi_power_meter wmi nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs libcrc32c sd_mod mgag200 i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm crc32c_intel nvme ahci nvme_core libahci libata tg3 i2c_core megaraid_sas ptp pps_core dm_mirror dm_region_hash dm_log dm_mod [ 103.413035] CPU: 0 PID: 102 Comm: kworker/0:2 Not tainted 4.11.0+ #1 [ 103.413036] Hardware name: Dell Inc. PowerEdge R730xd/072T6D, BIOS 2.2.5 09/06/2016 [ 103.413041] Workqueue: events nvme_remove_dead_ctrl_work [nvme] [ 103.413043] task: ffff9cc8775c8000 task.stack: ffffc033c252c000 [ 103.413045] RIP: 0010:bio_integrity_advance+0x48/0xf0 [ 103.413046] RSP: 0018:ffffc033c252fc10 EFLAGS: 00010202 [ 103.413048] RAX: 0000000000000000 RBX: ffff9cc8720a8cc0 RCX: ffff9cca72958240 [ 103.413049] RDX: ffff9cca72958000 RSI: 0000000000000008 RDI: ffff9cc872537f00 [ 103.413049] RBP: ffffc033c252fc28 R08: 0000000000000000 R09: ffffffffb963a0d5 [ 103.413050] R10: 000000000000063e R11: 0000000000000000 R12: ffff9cc8720a8d18 [ 103.413051] R13: 0000000000001000 R14: ffff9cc872682e00 R15: 00000000fffffffb [ 103.413053] FS: 0000000000000000(0000) GS:ffff9cc877c00000(0000) knlGS:0000000000000000 [ 103.413054] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 103.413055] CR2: 000000000000000a CR3: 0000000276c41000 CR4: 00000000001406f0 [ 103.413056] Call Trace: [ 103.413063] bio_advance+0x2a/0xe0 [ 103.413067] blk_update_request+0x76/0x330 [ 103.413072] blk_mq_end_request+0x1a/0x70 [ 103.413074] blk_mq_dispatch_rq_list+0x370/0x410 [ 103.413076] ? blk_mq_flush_busy_ctxs+0x94/0xe0 [ 103.413080] blk_mq_sched_dispatch_requests+0x173/0x1a0 [ 103.413083] __blk_mq_run_hw_queue+0x8e/0xa0 [ 103.413085] __blk_mq_delay_run_hw_queue+0x9d/0xa0 [ 103.413088] blk_mq_start_hw_queue+0x17/0x20 [ 103.413090] blk_mq_start_hw_queues+0x32/0x50 [ 103.413095] nvme_kill_queues+0x54/0x80 [nvme_core] [ 103.413097] nvme_remove_dead_ctrl_work+0x1f/0x40 [nvme] [ 103.413103] process_one_work+0x149/0x360 [ 103.413105] worker_thread+0x4d/0x3c0 [ 103.413109] kthread+0x109/0x140 [ 103.413111] ? rescuer_thread+0x380/0x380 [ 103.413113] ? kthread_park+0x60/0x60 [ 103.413120] ret_from_fork+0x2c/0x40 [ 103.413121] Code: 08 4c 8b 63 50 48 8b 80 80 00 00 00 48 8b 90 d0 03 00 00 31 c0 48 83 ba 40 02 00 00 00 48 8d 8a 40 02 00 00 48 0f 45 c1 c1 ee 09 <0f> b6 48 0a 0f b6 40 09 41 89 f5 83 e9 09 41 d3 ed 44 0f af e8 [ 103.413145] RIP: bio_integrity_advance+0x48/0xf0 RSP: ffffc033c252fc10 [ 103.413146] CR2: 000000000000000a [ 103.413157] ---[ end trace cd6875d16eb5a11e ]--- [ 103.455368] Kernel panic - not syncing: Fatal exception [ 103.459826] Kernel Offset: 0x37600000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) [ 103.850916] ---[ end Kernel panic - not syncing: Fatal exception [ 103.857637] sched: Unexpected reschedule of offline CPU#1! [ 103.863762] ------------[ cut here ]------------ [2] kernel hang in blk_mq_freeze_queue_wait() when CONFIG_BLK_DEV_INTEGRITY is off [ 247.129825] INFO: task nvme-test:1772 blocked for more than 120 seconds. [ 247.137311] Not tainted 4.12.0-rc2.upstream+ #4 [ 247.142954] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 247.151704] Call Trace: [ 247.154445] __schedule+0x28a/0x880 [ 247.158341] schedule+0x36/0x80 [ 247.161850] blk_mq_freeze_queue_wait+0x4b/0xb0 [ 247.166913] ? remove_wait_queue+0x60/0x60 [ 247.171485] blk_freeze_queue+0x1a/0x20 [ 247.175770] blk_cleanup_queue+0x7f/0x140 [ 247.180252] nvme_ns_remove+0xa3/0xb0 [nvme_core] [ 247.185503] nvme_remove_namespaces+0x32/0x50 [nvme_core] [ 247.191532] nvme_uninit_ctrl+0x2d/0xa0 [nvme_core] [ 247.196977] nvme_remove+0x70/0x110 [nvme] [ 247.201545] pci_device_remove+0x39/0xc0 [ 247.205927] device_release_driver_internal+0x141/0x200 [ 247.211761] device_release_driver+0x12/0x20 [ 247.216531] pci_stop_bus_device+0x8c/0xa0 [ 247.221104] pci_stop_and_remove_bus_device_locked+0x1a/0x30 [ 247.227420] remove_store+0x7c/0x90 [ 247.231320] dev_attr_store+0x18/0x30 [ 247.235409] sysfs_kf_write+0x3a/0x50 [ 247.239497] kernfs_fop_write+0xff/0x180 [ 247.243867] __vfs_write+0x37/0x160 [ 247.247757] ? selinux_file_permission+0xe5/0x120 [ 247.253011] ? security_file_permission+0x3b/0xc0 [ 247.258260] vfs_write+0xb2/0x1b0 [ 247.261964] ? syscall_trace_enter+0x1d0/0x2b0 [ 247.266924] SyS_write+0x55/0xc0 [ 247.270540] do_syscall_64+0x67/0x150 [ 247.274636] entry_SYSCALL64_slow_path+0x25/0x25 [ 247.279794] RIP: 0033:0x7f5c96740840 [ 247.283785] RSP: 002b:00007ffd00e87ee8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 247.292238] RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007f5c96740840 [ 247.300194] RDX: 0000000000000002 RSI: 00007f5c97060000 RDI: 0000000000000001 [ 247.308159] RBP: 00007f5c97060000 R08: 000000000000000a R09: 00007f5c97059740 [ 247.316123] R10: 0000000000000001 R11: 0000000000000246 R12: 00007f5c96a14400 [ 247.324087] R13: 0000000000000002 R14: 0000000000000001 R15: 0000000000000000 [ 370.016340] INFO: task nvme-test:1772 blocked for more than 120 seconds. Fixes: 12d70958a2e8(blk-mq: don't fail allocating driver tag for stopped hw queue) Cc: stable@vger.kernel.org Signed-off-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Bart Van Assche <Bart.VanAssche@sandisk.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-06-06 15:22:00 +00:00
bool run_queue = true;
/*
* RCU or SRCU read lock is needed before checking quiesced flag.
*
* When queue is stopped or quiesced, ignore 'bypass_insert' from
* blk_mq_request_issue_directly(), and return BLK_STS_OK to caller,
* and avoid driver to try to dispatch again.
*/
if (blk_mq_hctx_stopped(hctx) || blk_queue_quiesced(q)) {
blk-mq: fix direct issue If queue is stopped, we shouldn't dispatch request into driver and hardware, unfortunately the check is removed in bd166ef183c2(blk-mq-sched: add framework for MQ capable IO schedulers). This patch fixes the issue by moving the check back into __blk_mq_try_issue_directly(). This patch fixes request use-after-free[1][2] during canceling requets of NVMe in nvme_dev_disable(), which can be triggered easily during NVMe reset & remove test. [1] oops kernel log when CONFIG_BLK_DEV_INTEGRITY is on [ 103.412969] BUG: unable to handle kernel NULL pointer dereference at 000000000000000a [ 103.412980] IP: bio_integrity_advance+0x48/0xf0 [ 103.412981] PGD 275a88067 [ 103.412981] P4D 275a88067 [ 103.412982] PUD 276c43067 [ 103.412983] PMD 0 [ 103.412984] [ 103.412986] Oops: 0000 [#1] SMP [ 103.412989] Modules linked in: vfat fat intel_rapl sb_edac x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc aesni_intel crypto_simd cryptd ipmi_ssif iTCO_wdt iTCO_vendor_support mxm_wmi glue_helper dcdbas ipmi_si mei_me pcspkr mei sg ipmi_devintf lpc_ich ipmi_msghandler shpchp acpi_power_meter wmi nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs libcrc32c sd_mod mgag200 i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm crc32c_intel nvme ahci nvme_core libahci libata tg3 i2c_core megaraid_sas ptp pps_core dm_mirror dm_region_hash dm_log dm_mod [ 103.413035] CPU: 0 PID: 102 Comm: kworker/0:2 Not tainted 4.11.0+ #1 [ 103.413036] Hardware name: Dell Inc. PowerEdge R730xd/072T6D, BIOS 2.2.5 09/06/2016 [ 103.413041] Workqueue: events nvme_remove_dead_ctrl_work [nvme] [ 103.413043] task: ffff9cc8775c8000 task.stack: ffffc033c252c000 [ 103.413045] RIP: 0010:bio_integrity_advance+0x48/0xf0 [ 103.413046] RSP: 0018:ffffc033c252fc10 EFLAGS: 00010202 [ 103.413048] RAX: 0000000000000000 RBX: ffff9cc8720a8cc0 RCX: ffff9cca72958240 [ 103.413049] RDX: ffff9cca72958000 RSI: 0000000000000008 RDI: ffff9cc872537f00 [ 103.413049] RBP: ffffc033c252fc28 R08: 0000000000000000 R09: ffffffffb963a0d5 [ 103.413050] R10: 000000000000063e R11: 0000000000000000 R12: ffff9cc8720a8d18 [ 103.413051] R13: 0000000000001000 R14: ffff9cc872682e00 R15: 00000000fffffffb [ 103.413053] FS: 0000000000000000(0000) GS:ffff9cc877c00000(0000) knlGS:0000000000000000 [ 103.413054] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 103.413055] CR2: 000000000000000a CR3: 0000000276c41000 CR4: 00000000001406f0 [ 103.413056] Call Trace: [ 103.413063] bio_advance+0x2a/0xe0 [ 103.413067] blk_update_request+0x76/0x330 [ 103.413072] blk_mq_end_request+0x1a/0x70 [ 103.413074] blk_mq_dispatch_rq_list+0x370/0x410 [ 103.413076] ? blk_mq_flush_busy_ctxs+0x94/0xe0 [ 103.413080] blk_mq_sched_dispatch_requests+0x173/0x1a0 [ 103.413083] __blk_mq_run_hw_queue+0x8e/0xa0 [ 103.413085] __blk_mq_delay_run_hw_queue+0x9d/0xa0 [ 103.413088] blk_mq_start_hw_queue+0x17/0x20 [ 103.413090] blk_mq_start_hw_queues+0x32/0x50 [ 103.413095] nvme_kill_queues+0x54/0x80 [nvme_core] [ 103.413097] nvme_remove_dead_ctrl_work+0x1f/0x40 [nvme] [ 103.413103] process_one_work+0x149/0x360 [ 103.413105] worker_thread+0x4d/0x3c0 [ 103.413109] kthread+0x109/0x140 [ 103.413111] ? rescuer_thread+0x380/0x380 [ 103.413113] ? kthread_park+0x60/0x60 [ 103.413120] ret_from_fork+0x2c/0x40 [ 103.413121] Code: 08 4c 8b 63 50 48 8b 80 80 00 00 00 48 8b 90 d0 03 00 00 31 c0 48 83 ba 40 02 00 00 00 48 8d 8a 40 02 00 00 48 0f 45 c1 c1 ee 09 <0f> b6 48 0a 0f b6 40 09 41 89 f5 83 e9 09 41 d3 ed 44 0f af e8 [ 103.413145] RIP: bio_integrity_advance+0x48/0xf0 RSP: ffffc033c252fc10 [ 103.413146] CR2: 000000000000000a [ 103.413157] ---[ end trace cd6875d16eb5a11e ]--- [ 103.455368] Kernel panic - not syncing: Fatal exception [ 103.459826] Kernel Offset: 0x37600000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) [ 103.850916] ---[ end Kernel panic - not syncing: Fatal exception [ 103.857637] sched: Unexpected reschedule of offline CPU#1! [ 103.863762] ------------[ cut here ]------------ [2] kernel hang in blk_mq_freeze_queue_wait() when CONFIG_BLK_DEV_INTEGRITY is off [ 247.129825] INFO: task nvme-test:1772 blocked for more than 120 seconds. [ 247.137311] Not tainted 4.12.0-rc2.upstream+ #4 [ 247.142954] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 247.151704] Call Trace: [ 247.154445] __schedule+0x28a/0x880 [ 247.158341] schedule+0x36/0x80 [ 247.161850] blk_mq_freeze_queue_wait+0x4b/0xb0 [ 247.166913] ? remove_wait_queue+0x60/0x60 [ 247.171485] blk_freeze_queue+0x1a/0x20 [ 247.175770] blk_cleanup_queue+0x7f/0x140 [ 247.180252] nvme_ns_remove+0xa3/0xb0 [nvme_core] [ 247.185503] nvme_remove_namespaces+0x32/0x50 [nvme_core] [ 247.191532] nvme_uninit_ctrl+0x2d/0xa0 [nvme_core] [ 247.196977] nvme_remove+0x70/0x110 [nvme] [ 247.201545] pci_device_remove+0x39/0xc0 [ 247.205927] device_release_driver_internal+0x141/0x200 [ 247.211761] device_release_driver+0x12/0x20 [ 247.216531] pci_stop_bus_device+0x8c/0xa0 [ 247.221104] pci_stop_and_remove_bus_device_locked+0x1a/0x30 [ 247.227420] remove_store+0x7c/0x90 [ 247.231320] dev_attr_store+0x18/0x30 [ 247.235409] sysfs_kf_write+0x3a/0x50 [ 247.239497] kernfs_fop_write+0xff/0x180 [ 247.243867] __vfs_write+0x37/0x160 [ 247.247757] ? selinux_file_permission+0xe5/0x120 [ 247.253011] ? security_file_permission+0x3b/0xc0 [ 247.258260] vfs_write+0xb2/0x1b0 [ 247.261964] ? syscall_trace_enter+0x1d0/0x2b0 [ 247.266924] SyS_write+0x55/0xc0 [ 247.270540] do_syscall_64+0x67/0x150 [ 247.274636] entry_SYSCALL64_slow_path+0x25/0x25 [ 247.279794] RIP: 0033:0x7f5c96740840 [ 247.283785] RSP: 002b:00007ffd00e87ee8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 247.292238] RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007f5c96740840 [ 247.300194] RDX: 0000000000000002 RSI: 00007f5c97060000 RDI: 0000000000000001 [ 247.308159] RBP: 00007f5c97060000 R08: 000000000000000a R09: 00007f5c97059740 [ 247.316123] R10: 0000000000000001 R11: 0000000000000246 R12: 00007f5c96a14400 [ 247.324087] R13: 0000000000000002 R14: 0000000000000001 R15: 0000000000000000 [ 370.016340] INFO: task nvme-test:1772 blocked for more than 120 seconds. Fixes: 12d70958a2e8(blk-mq: don't fail allocating driver tag for stopped hw queue) Cc: stable@vger.kernel.org Signed-off-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Bart Van Assche <Bart.VanAssche@sandisk.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-06-06 15:22:00 +00:00
run_queue = false;
bypass_insert = false;
blk-mq: fix direct issue If queue is stopped, we shouldn't dispatch request into driver and hardware, unfortunately the check is removed in bd166ef183c2(blk-mq-sched: add framework for MQ capable IO schedulers). This patch fixes the issue by moving the check back into __blk_mq_try_issue_directly(). This patch fixes request use-after-free[1][2] during canceling requets of NVMe in nvme_dev_disable(), which can be triggered easily during NVMe reset & remove test. [1] oops kernel log when CONFIG_BLK_DEV_INTEGRITY is on [ 103.412969] BUG: unable to handle kernel NULL pointer dereference at 000000000000000a [ 103.412980] IP: bio_integrity_advance+0x48/0xf0 [ 103.412981] PGD 275a88067 [ 103.412981] P4D 275a88067 [ 103.412982] PUD 276c43067 [ 103.412983] PMD 0 [ 103.412984] [ 103.412986] Oops: 0000 [#1] SMP [ 103.412989] Modules linked in: vfat fat intel_rapl sb_edac x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc aesni_intel crypto_simd cryptd ipmi_ssif iTCO_wdt iTCO_vendor_support mxm_wmi glue_helper dcdbas ipmi_si mei_me pcspkr mei sg ipmi_devintf lpc_ich ipmi_msghandler shpchp acpi_power_meter wmi nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs libcrc32c sd_mod mgag200 i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm crc32c_intel nvme ahci nvme_core libahci libata tg3 i2c_core megaraid_sas ptp pps_core dm_mirror dm_region_hash dm_log dm_mod [ 103.413035] CPU: 0 PID: 102 Comm: kworker/0:2 Not tainted 4.11.0+ #1 [ 103.413036] Hardware name: Dell Inc. PowerEdge R730xd/072T6D, BIOS 2.2.5 09/06/2016 [ 103.413041] Workqueue: events nvme_remove_dead_ctrl_work [nvme] [ 103.413043] task: ffff9cc8775c8000 task.stack: ffffc033c252c000 [ 103.413045] RIP: 0010:bio_integrity_advance+0x48/0xf0 [ 103.413046] RSP: 0018:ffffc033c252fc10 EFLAGS: 00010202 [ 103.413048] RAX: 0000000000000000 RBX: ffff9cc8720a8cc0 RCX: ffff9cca72958240 [ 103.413049] RDX: ffff9cca72958000 RSI: 0000000000000008 RDI: ffff9cc872537f00 [ 103.413049] RBP: ffffc033c252fc28 R08: 0000000000000000 R09: ffffffffb963a0d5 [ 103.413050] R10: 000000000000063e R11: 0000000000000000 R12: ffff9cc8720a8d18 [ 103.413051] R13: 0000000000001000 R14: ffff9cc872682e00 R15: 00000000fffffffb [ 103.413053] FS: 0000000000000000(0000) GS:ffff9cc877c00000(0000) knlGS:0000000000000000 [ 103.413054] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 103.413055] CR2: 000000000000000a CR3: 0000000276c41000 CR4: 00000000001406f0 [ 103.413056] Call Trace: [ 103.413063] bio_advance+0x2a/0xe0 [ 103.413067] blk_update_request+0x76/0x330 [ 103.413072] blk_mq_end_request+0x1a/0x70 [ 103.413074] blk_mq_dispatch_rq_list+0x370/0x410 [ 103.413076] ? blk_mq_flush_busy_ctxs+0x94/0xe0 [ 103.413080] blk_mq_sched_dispatch_requests+0x173/0x1a0 [ 103.413083] __blk_mq_run_hw_queue+0x8e/0xa0 [ 103.413085] __blk_mq_delay_run_hw_queue+0x9d/0xa0 [ 103.413088] blk_mq_start_hw_queue+0x17/0x20 [ 103.413090] blk_mq_start_hw_queues+0x32/0x50 [ 103.413095] nvme_kill_queues+0x54/0x80 [nvme_core] [ 103.413097] nvme_remove_dead_ctrl_work+0x1f/0x40 [nvme] [ 103.413103] process_one_work+0x149/0x360 [ 103.413105] worker_thread+0x4d/0x3c0 [ 103.413109] kthread+0x109/0x140 [ 103.413111] ? rescuer_thread+0x380/0x380 [ 103.413113] ? kthread_park+0x60/0x60 [ 103.413120] ret_from_fork+0x2c/0x40 [ 103.413121] Code: 08 4c 8b 63 50 48 8b 80 80 00 00 00 48 8b 90 d0 03 00 00 31 c0 48 83 ba 40 02 00 00 00 48 8d 8a 40 02 00 00 48 0f 45 c1 c1 ee 09 <0f> b6 48 0a 0f b6 40 09 41 89 f5 83 e9 09 41 d3 ed 44 0f af e8 [ 103.413145] RIP: bio_integrity_advance+0x48/0xf0 RSP: ffffc033c252fc10 [ 103.413146] CR2: 000000000000000a [ 103.413157] ---[ end trace cd6875d16eb5a11e ]--- [ 103.455368] Kernel panic - not syncing: Fatal exception [ 103.459826] Kernel Offset: 0x37600000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) [ 103.850916] ---[ end Kernel panic - not syncing: Fatal exception [ 103.857637] sched: Unexpected reschedule of offline CPU#1! [ 103.863762] ------------[ cut here ]------------ [2] kernel hang in blk_mq_freeze_queue_wait() when CONFIG_BLK_DEV_INTEGRITY is off [ 247.129825] INFO: task nvme-test:1772 blocked for more than 120 seconds. [ 247.137311] Not tainted 4.12.0-rc2.upstream+ #4 [ 247.142954] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 247.151704] Call Trace: [ 247.154445] __schedule+0x28a/0x880 [ 247.158341] schedule+0x36/0x80 [ 247.161850] blk_mq_freeze_queue_wait+0x4b/0xb0 [ 247.166913] ? remove_wait_queue+0x60/0x60 [ 247.171485] blk_freeze_queue+0x1a/0x20 [ 247.175770] blk_cleanup_queue+0x7f/0x140 [ 247.180252] nvme_ns_remove+0xa3/0xb0 [nvme_core] [ 247.185503] nvme_remove_namespaces+0x32/0x50 [nvme_core] [ 247.191532] nvme_uninit_ctrl+0x2d/0xa0 [nvme_core] [ 247.196977] nvme_remove+0x70/0x110 [nvme] [ 247.201545] pci_device_remove+0x39/0xc0 [ 247.205927] device_release_driver_internal+0x141/0x200 [ 247.211761] device_release_driver+0x12/0x20 [ 247.216531] pci_stop_bus_device+0x8c/0xa0 [ 247.221104] pci_stop_and_remove_bus_device_locked+0x1a/0x30 [ 247.227420] remove_store+0x7c/0x90 [ 247.231320] dev_attr_store+0x18/0x30 [ 247.235409] sysfs_kf_write+0x3a/0x50 [ 247.239497] kernfs_fop_write+0xff/0x180 [ 247.243867] __vfs_write+0x37/0x160 [ 247.247757] ? selinux_file_permission+0xe5/0x120 [ 247.253011] ? security_file_permission+0x3b/0xc0 [ 247.258260] vfs_write+0xb2/0x1b0 [ 247.261964] ? syscall_trace_enter+0x1d0/0x2b0 [ 247.266924] SyS_write+0x55/0xc0 [ 247.270540] do_syscall_64+0x67/0x150 [ 247.274636] entry_SYSCALL64_slow_path+0x25/0x25 [ 247.279794] RIP: 0033:0x7f5c96740840 [ 247.283785] RSP: 002b:00007ffd00e87ee8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 247.292238] RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007f5c96740840 [ 247.300194] RDX: 0000000000000002 RSI: 00007f5c97060000 RDI: 0000000000000001 [ 247.308159] RBP: 00007f5c97060000 R08: 000000000000000a R09: 00007f5c97059740 [ 247.316123] R10: 0000000000000001 R11: 0000000000000246 R12: 00007f5c96a14400 [ 247.324087] R13: 0000000000000002 R14: 0000000000000001 R15: 0000000000000000 [ 370.016340] INFO: task nvme-test:1772 blocked for more than 120 seconds. Fixes: 12d70958a2e8(blk-mq: don't fail allocating driver tag for stopped hw queue) Cc: stable@vger.kernel.org Signed-off-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Bart Van Assche <Bart.VanAssche@sandisk.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-06-06 15:22:00 +00:00
goto insert;
}
blk-mq: improve DM's blk-mq IO merging via blk_insert_cloned_request feedback blk_insert_cloned_request() is called in the fast path of a dm-rq driver (e.g. blk-mq request-based DM mpath). blk_insert_cloned_request() uses blk_mq_request_bypass_insert() to directly append the request to the blk-mq hctx->dispatch_list of the underlying queue. 1) This way isn't efficient enough because the hctx spinlock is always used. 2) With blk_insert_cloned_request(), we completely bypass underlying queue's elevator and depend on the upper-level dm-rq driver's elevator to schedule IO. But dm-rq currently can't get the underlying queue's dispatch feedback at all. Without knowing whether a request was issued or not (e.g. due to underlying queue being busy) the dm-rq elevator will not be able to provide effective IO merging (as a side-effect of dm-rq currently blindly destaging a request from its elevator only to requeue it after a delay, which kills any opportunity for merging). This obviously causes very bad sequential IO performance. Fix this by updating blk_insert_cloned_request() to use blk_mq_request_direct_issue(). blk_mq_request_direct_issue() allows a request to be issued directly to the underlying queue and returns the dispatch feedback (blk_status_t). If blk_mq_request_direct_issue() returns BLK_SYS_RESOURCE the dm-rq driver will now use DM_MAPIO_REQUEUE to _not_ destage the request. Whereby preserving the opportunity to merge IO. With this, request-based DM's blk-mq sequential IO performance is vastly improved (as much as 3X in mpath/virtio-scsi testing). Signed-off-by: Ming Lei <ming.lei@redhat.com> [blk-mq.c changes heavily influenced by Ming Lei's initial solution, but they were refactored to make them less fragile and easier to read/review] Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-17 16:25:57 +00:00
if (q->elevator && !bypass_insert)
goto insert;
if (!blk_mq_get_dispatch_budget(hctx))
goto insert;
if (!blk_mq_get_driver_tag(rq, NULL, false)) {
blk_mq_put_dispatch_budget(hctx);
goto insert;
}
return __blk_mq_issue_directly(hctx, rq, cookie);
insert:
blk-mq: improve DM's blk-mq IO merging via blk_insert_cloned_request feedback blk_insert_cloned_request() is called in the fast path of a dm-rq driver (e.g. blk-mq request-based DM mpath). blk_insert_cloned_request() uses blk_mq_request_bypass_insert() to directly append the request to the blk-mq hctx->dispatch_list of the underlying queue. 1) This way isn't efficient enough because the hctx spinlock is always used. 2) With blk_insert_cloned_request(), we completely bypass underlying queue's elevator and depend on the upper-level dm-rq driver's elevator to schedule IO. But dm-rq currently can't get the underlying queue's dispatch feedback at all. Without knowing whether a request was issued or not (e.g. due to underlying queue being busy) the dm-rq elevator will not be able to provide effective IO merging (as a side-effect of dm-rq currently blindly destaging a request from its elevator only to requeue it after a delay, which kills any opportunity for merging). This obviously causes very bad sequential IO performance. Fix this by updating blk_insert_cloned_request() to use blk_mq_request_direct_issue(). blk_mq_request_direct_issue() allows a request to be issued directly to the underlying queue and returns the dispatch feedback (blk_status_t). If blk_mq_request_direct_issue() returns BLK_SYS_RESOURCE the dm-rq driver will now use DM_MAPIO_REQUEUE to _not_ destage the request. Whereby preserving the opportunity to merge IO. With this, request-based DM's blk-mq sequential IO performance is vastly improved (as much as 3X in mpath/virtio-scsi testing). Signed-off-by: Ming Lei <ming.lei@redhat.com> [blk-mq.c changes heavily influenced by Ming Lei's initial solution, but they were refactored to make them less fragile and easier to read/review] Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-17 16:25:57 +00:00
if (bypass_insert)
return BLK_STS_RESOURCE;
blk_mq_sched_insert_request(rq, false, run_queue, false);
return BLK_STS_OK;
}
static void blk_mq_try_issue_directly(struct blk_mq_hw_ctx *hctx,
struct request *rq, blk_qc_t *cookie)
{
blk_status_t ret;
int srcu_idx;
might_sleep_if(hctx->flags & BLK_MQ_F_BLOCKING);
hctx_lock(hctx, &srcu_idx);
blk-mq: improve DM's blk-mq IO merging via blk_insert_cloned_request feedback blk_insert_cloned_request() is called in the fast path of a dm-rq driver (e.g. blk-mq request-based DM mpath). blk_insert_cloned_request() uses blk_mq_request_bypass_insert() to directly append the request to the blk-mq hctx->dispatch_list of the underlying queue. 1) This way isn't efficient enough because the hctx spinlock is always used. 2) With blk_insert_cloned_request(), we completely bypass underlying queue's elevator and depend on the upper-level dm-rq driver's elevator to schedule IO. But dm-rq currently can't get the underlying queue's dispatch feedback at all. Without knowing whether a request was issued or not (e.g. due to underlying queue being busy) the dm-rq elevator will not be able to provide effective IO merging (as a side-effect of dm-rq currently blindly destaging a request from its elevator only to requeue it after a delay, which kills any opportunity for merging). This obviously causes very bad sequential IO performance. Fix this by updating blk_insert_cloned_request() to use blk_mq_request_direct_issue(). blk_mq_request_direct_issue() allows a request to be issued directly to the underlying queue and returns the dispatch feedback (blk_status_t). If blk_mq_request_direct_issue() returns BLK_SYS_RESOURCE the dm-rq driver will now use DM_MAPIO_REQUEUE to _not_ destage the request. Whereby preserving the opportunity to merge IO. With this, request-based DM's blk-mq sequential IO performance is vastly improved (as much as 3X in mpath/virtio-scsi testing). Signed-off-by: Ming Lei <ming.lei@redhat.com> [blk-mq.c changes heavily influenced by Ming Lei's initial solution, but they were refactored to make them less fragile and easier to read/review] Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-17 16:25:57 +00:00
ret = __blk_mq_try_issue_directly(hctx, rq, cookie, false);
blk-mq: introduce BLK_STS_DEV_RESOURCE This status is returned from driver to block layer if device related resource is unavailable, but driver can guarantee that IO dispatch will be triggered in future when the resource is available. Convert some drivers to return BLK_STS_DEV_RESOURCE. Also, if driver returns BLK_STS_RESOURCE and SCHED_RESTART is set, rerun queue after a delay (BLK_MQ_DELAY_QUEUE) to avoid IO stalls. BLK_MQ_DELAY_QUEUE is 3 ms because both scsi-mq and nvmefc are using that magic value. If a driver can make sure there is in-flight IO, it is safe to return BLK_STS_DEV_RESOURCE because: 1) If all in-flight IOs complete before examining SCHED_RESTART in blk_mq_dispatch_rq_list(), SCHED_RESTART must be cleared, so queue is run immediately in this case by blk_mq_dispatch_rq_list(); 2) if there is any in-flight IO after/when examining SCHED_RESTART in blk_mq_dispatch_rq_list(): - if SCHED_RESTART isn't set, queue is run immediately as handled in 1) - otherwise, this request will be dispatched after any in-flight IO is completed via blk_mq_sched_restart() 3) if SCHED_RESTART is set concurently in context because of BLK_STS_RESOURCE, blk_mq_delay_run_hw_queue() will cover the above two cases and make sure IO hang can be avoided. One invariant is that queue will be rerun if SCHED_RESTART is set. Suggested-by: Jens Axboe <axboe@kernel.dk> Tested-by: Laurence Oberman <loberman@redhat.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-31 03:04:57 +00:00
if (ret == BLK_STS_RESOURCE || ret == BLK_STS_DEV_RESOURCE)
blk_mq_sched_insert_request(rq, false, true, false);
else if (ret != BLK_STS_OK)
blk_mq_end_request(rq, ret);
hctx_unlock(hctx, srcu_idx);
}
blk_status_t blk_mq_request_issue_directly(struct request *rq)
blk-mq: improve DM's blk-mq IO merging via blk_insert_cloned_request feedback blk_insert_cloned_request() is called in the fast path of a dm-rq driver (e.g. blk-mq request-based DM mpath). blk_insert_cloned_request() uses blk_mq_request_bypass_insert() to directly append the request to the blk-mq hctx->dispatch_list of the underlying queue. 1) This way isn't efficient enough because the hctx spinlock is always used. 2) With blk_insert_cloned_request(), we completely bypass underlying queue's elevator and depend on the upper-level dm-rq driver's elevator to schedule IO. But dm-rq currently can't get the underlying queue's dispatch feedback at all. Without knowing whether a request was issued or not (e.g. due to underlying queue being busy) the dm-rq elevator will not be able to provide effective IO merging (as a side-effect of dm-rq currently blindly destaging a request from its elevator only to requeue it after a delay, which kills any opportunity for merging). This obviously causes very bad sequential IO performance. Fix this by updating blk_insert_cloned_request() to use blk_mq_request_direct_issue(). blk_mq_request_direct_issue() allows a request to be issued directly to the underlying queue and returns the dispatch feedback (blk_status_t). If blk_mq_request_direct_issue() returns BLK_SYS_RESOURCE the dm-rq driver will now use DM_MAPIO_REQUEUE to _not_ destage the request. Whereby preserving the opportunity to merge IO. With this, request-based DM's blk-mq sequential IO performance is vastly improved (as much as 3X in mpath/virtio-scsi testing). Signed-off-by: Ming Lei <ming.lei@redhat.com> [blk-mq.c changes heavily influenced by Ming Lei's initial solution, but they were refactored to make them less fragile and easier to read/review] Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-17 16:25:57 +00:00
{
blk_status_t ret;
int srcu_idx;
blk_qc_t unused_cookie;
struct blk_mq_ctx *ctx = rq->mq_ctx;
struct blk_mq_hw_ctx *hctx = blk_mq_map_queue(rq->q, ctx->cpu);
hctx_lock(hctx, &srcu_idx);
ret = __blk_mq_try_issue_directly(hctx, rq, &unused_cookie, true);
hctx_unlock(hctx, srcu_idx);
return ret;
}
static blk_qc_t blk_mq_make_request(struct request_queue *q, struct bio *bio)
{
const int is_sync = op_is_sync(bio->bi_opf);
const int is_flush_fua = op_is_flush(bio->bi_opf);
struct blk_mq_alloc_data data = { .flags = 0 };
struct request *rq;
unsigned int request_count = 0;
struct blk_plug *plug;
struct request *same_queue_rq = NULL;
blk_qc_t cookie;
block: hook up writeback throttling Enable throttling of buffered writeback to make it a lot more smooth, and has way less impact on other system activity. Background writeback should be, by definition, background activity. The fact that we flush huge bundles of it at the time means that it potentially has heavy impacts on foreground workloads, which isn't ideal. We can't easily limit the sizes of writes that we do, since that would impact file system layout in the presence of delayed allocation. So just throttle back buffered writeback, unless someone is waiting for it. The algorithm for when to throttle takes its inspiration in the CoDel networking scheduling algorithm. Like CoDel, blk-wb monitors the minimum latencies of requests over a window of time. In that window of time, if the minimum latency of any request exceeds a given target, then a scale count is incremented and the queue depth is shrunk. The next monitoring window is shrunk accordingly. Unlike CoDel, if we hit a window that exhibits good behavior, then we simply increment the scale count and re-calculate the limits for that scale value. This prevents us from oscillating between a close-to-ideal value and max all the time, instead remaining in the windows where we get good behavior. Unlike CoDel, blk-wb allows the scale count to to negative. This happens if we primarily have writes going on. Unlike positive scale counts, this doesn't change the size of the monitoring window. When the heavy writers finish, blk-bw quickly snaps back to it's stable state of a zero scale count. The patch registers a sysfs entry, 'wb_lat_usec'. This sets the latency target to me met. It defaults to 2 msec for non-rotational storage, and 75 msec for rotational storage. Setting this value to '0' disables blk-wb. Generally, a user would not have to touch this setting. We don't enable WBT on devices that are managed with CFQ, and have a non-root block cgroup attached. If we have a proportional share setup on this particular disk, then the wbt throttling will interfere with that. We don't have a strong need for wbt for that case, since we will rely on CFQ doing that for us. Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-09 19:38:14 +00:00
unsigned int wb_acct;
blk_queue_bounce(q, &bio);
blk_queue_split(q, &bio);
2017-05-10 13:54:11 +00:00
if (!bio_integrity_prep(bio))
return BLK_QC_T_NONE;
if (!is_flush_fua && !blk_queue_nomerges(q) &&
blk_attempt_plug_merge(q, bio, &request_count, &same_queue_rq))
return BLK_QC_T_NONE;
if (blk_mq_sched_bio_merge(q, bio))
return BLK_QC_T_NONE;
block: hook up writeback throttling Enable throttling of buffered writeback to make it a lot more smooth, and has way less impact on other system activity. Background writeback should be, by definition, background activity. The fact that we flush huge bundles of it at the time means that it potentially has heavy impacts on foreground workloads, which isn't ideal. We can't easily limit the sizes of writes that we do, since that would impact file system layout in the presence of delayed allocation. So just throttle back buffered writeback, unless someone is waiting for it. The algorithm for when to throttle takes its inspiration in the CoDel networking scheduling algorithm. Like CoDel, blk-wb monitors the minimum latencies of requests over a window of time. In that window of time, if the minimum latency of any request exceeds a given target, then a scale count is incremented and the queue depth is shrunk. The next monitoring window is shrunk accordingly. Unlike CoDel, if we hit a window that exhibits good behavior, then we simply increment the scale count and re-calculate the limits for that scale value. This prevents us from oscillating between a close-to-ideal value and max all the time, instead remaining in the windows where we get good behavior. Unlike CoDel, blk-wb allows the scale count to to negative. This happens if we primarily have writes going on. Unlike positive scale counts, this doesn't change the size of the monitoring window. When the heavy writers finish, blk-bw quickly snaps back to it's stable state of a zero scale count. The patch registers a sysfs entry, 'wb_lat_usec'. This sets the latency target to me met. It defaults to 2 msec for non-rotational storage, and 75 msec for rotational storage. Setting this value to '0' disables blk-wb. Generally, a user would not have to touch this setting. We don't enable WBT on devices that are managed with CFQ, and have a non-root block cgroup attached. If we have a proportional share setup on this particular disk, then the wbt throttling will interfere with that. We don't have a strong need for wbt for that case, since we will rely on CFQ doing that for us. Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-09 19:38:14 +00:00
wb_acct = wbt_wait(q->rq_wb, bio, NULL);
trace_block_getrq(q, bio, bio->bi_opf);
rq = blk_mq_get_request(q, bio, bio->bi_opf, &data);
block: hook up writeback throttling Enable throttling of buffered writeback to make it a lot more smooth, and has way less impact on other system activity. Background writeback should be, by definition, background activity. The fact that we flush huge bundles of it at the time means that it potentially has heavy impacts on foreground workloads, which isn't ideal. We can't easily limit the sizes of writes that we do, since that would impact file system layout in the presence of delayed allocation. So just throttle back buffered writeback, unless someone is waiting for it. The algorithm for when to throttle takes its inspiration in the CoDel networking scheduling algorithm. Like CoDel, blk-wb monitors the minimum latencies of requests over a window of time. In that window of time, if the minimum latency of any request exceeds a given target, then a scale count is incremented and the queue depth is shrunk. The next monitoring window is shrunk accordingly. Unlike CoDel, if we hit a window that exhibits good behavior, then we simply increment the scale count and re-calculate the limits for that scale value. This prevents us from oscillating between a close-to-ideal value and max all the time, instead remaining in the windows where we get good behavior. Unlike CoDel, blk-wb allows the scale count to to negative. This happens if we primarily have writes going on. Unlike positive scale counts, this doesn't change the size of the monitoring window. When the heavy writers finish, blk-bw quickly snaps back to it's stable state of a zero scale count. The patch registers a sysfs entry, 'wb_lat_usec'. This sets the latency target to me met. It defaults to 2 msec for non-rotational storage, and 75 msec for rotational storage. Setting this value to '0' disables blk-wb. Generally, a user would not have to touch this setting. We don't enable WBT on devices that are managed with CFQ, and have a non-root block cgroup attached. If we have a proportional share setup on this particular disk, then the wbt throttling will interfere with that. We don't have a strong need for wbt for that case, since we will rely on CFQ doing that for us. Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-09 19:38:14 +00:00
if (unlikely(!rq)) {
__wbt_done(q->rq_wb, wb_acct);
if (bio->bi_opf & REQ_NOWAIT)
bio_wouldblock_error(bio);
return BLK_QC_T_NONE;
block: hook up writeback throttling Enable throttling of buffered writeback to make it a lot more smooth, and has way less impact on other system activity. Background writeback should be, by definition, background activity. The fact that we flush huge bundles of it at the time means that it potentially has heavy impacts on foreground workloads, which isn't ideal. We can't easily limit the sizes of writes that we do, since that would impact file system layout in the presence of delayed allocation. So just throttle back buffered writeback, unless someone is waiting for it. The algorithm for when to throttle takes its inspiration in the CoDel networking scheduling algorithm. Like CoDel, blk-wb monitors the minimum latencies of requests over a window of time. In that window of time, if the minimum latency of any request exceeds a given target, then a scale count is incremented and the queue depth is shrunk. The next monitoring window is shrunk accordingly. Unlike CoDel, if we hit a window that exhibits good behavior, then we simply increment the scale count and re-calculate the limits for that scale value. This prevents us from oscillating between a close-to-ideal value and max all the time, instead remaining in the windows where we get good behavior. Unlike CoDel, blk-wb allows the scale count to to negative. This happens if we primarily have writes going on. Unlike positive scale counts, this doesn't change the size of the monitoring window. When the heavy writers finish, blk-bw quickly snaps back to it's stable state of a zero scale count. The patch registers a sysfs entry, 'wb_lat_usec'. This sets the latency target to me met. It defaults to 2 msec for non-rotational storage, and 75 msec for rotational storage. Setting this value to '0' disables blk-wb. Generally, a user would not have to touch this setting. We don't enable WBT on devices that are managed with CFQ, and have a non-root block cgroup attached. If we have a proportional share setup on this particular disk, then the wbt throttling will interfere with that. We don't have a strong need for wbt for that case, since we will rely on CFQ doing that for us. Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-09 19:38:14 +00:00
}
wbt_track(rq, wb_acct);
cookie = request_to_qc_t(data.hctx, rq);
plug = current->plug;
if (unlikely(is_flush_fua)) {
blk_mq_put_ctx(data.ctx);
blk_mq_bio_to_request(rq, bio);
/* bypass scheduler for flush rq */
blk_insert_flush(rq);
blk_mq_run_hw_queue(data.hctx, true);
} else if (plug && q->nr_hw_queues == 1) {
struct request *last = NULL;
blk-mq: fix schedule-while-atomic with scheduler attached We must have dropped the ctx before we call blk_mq_sched_insert_request() with can_block=true, otherwise we risk that a flush request can block on insertion if we are currently out of tags. [ 47.667190] BUG: scheduling while atomic: jbd2/sda2-8/2089/0x00000002 [ 47.674493] Modules linked in: x86_pkg_temp_thermal btrfs xor zlib_deflate raid6_pq sr_mod cdre [ 47.690572] Preemption disabled at: [ 47.690584] [<ffffffff81326c7c>] blk_mq_sched_get_request+0x6c/0x280 [ 47.701764] CPU: 1 PID: 2089 Comm: jbd2/sda2-8 Not tainted 4.11.0-rc7+ #271 [ 47.709630] Hardware name: Dell Inc. PowerEdge T630/0NT78X, BIOS 2.3.4 11/09/2016 [ 47.718081] Call Trace: [ 47.720903] dump_stack+0x4f/0x73 [ 47.724694] ? blk_mq_sched_get_request+0x6c/0x280 [ 47.730137] __schedule_bug+0x6c/0xc0 [ 47.734314] __schedule+0x559/0x780 [ 47.738302] schedule+0x3b/0x90 [ 47.741899] io_schedule+0x11/0x40 [ 47.745788] blk_mq_get_tag+0x167/0x2a0 [ 47.750162] ? remove_wait_queue+0x70/0x70 [ 47.754901] blk_mq_get_driver_tag+0x92/0xf0 [ 47.759758] blk_mq_sched_insert_request+0x134/0x170 [ 47.765398] ? blk_account_io_start+0xd0/0x270 [ 47.770679] blk_mq_make_request+0x1b2/0x850 [ 47.775766] generic_make_request+0xf7/0x2d0 [ 47.780860] submit_bio+0x5f/0x120 [ 47.784979] ? submit_bio+0x5f/0x120 [ 47.789631] submit_bh_wbc.isra.46+0x10d/0x130 [ 47.794902] submit_bh+0xb/0x10 [ 47.798719] journal_submit_commit_record+0x190/0x210 [ 47.804686] ? _raw_spin_unlock+0x13/0x30 [ 47.809480] jbd2_journal_commit_transaction+0x180a/0x1d00 [ 47.815925] kjournald2+0xb6/0x250 [ 47.820022] ? kjournald2+0xb6/0x250 [ 47.824328] ? remove_wait_queue+0x70/0x70 [ 47.829223] kthread+0x10e/0x140 [ 47.833147] ? commit_timeout+0x10/0x10 [ 47.837742] ? kthread_create_on_node+0x40/0x40 [ 47.843122] ret_from_fork+0x29/0x40 Fixes: a4d907b6a33b ("blk-mq: streamline blk_mq_make_request") Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-20 22:40:36 +00:00
blk_mq_put_ctx(data.ctx);
blk_mq_bio_to_request(rq, bio);
/*
* @request_count may become stale because of schedule
* out, so check the list again.
*/
if (list_empty(&plug->mq_list))
request_count = 0;
else if (blk_queue_nomerges(q))
request_count = blk_plug_queued_count(q);
if (!request_count)
trace_block_plug(q);
else
last = list_entry_rq(plug->mq_list.prev);
blk-mq: fix calling unplug callbacks with preempt disabled Liu reported that running certain parts of xfstests threw the following error: BUG: sleeping function called from invalid context at mm/page_alloc.c:3190 in_atomic(): 1, irqs_disabled(): 0, pid: 6, name: kworker/u16:0 3 locks held by kworker/u16:0/6: #0: ("writeback"){++++.+}, at: [<ffffffff8107f083>] process_one_work+0x173/0x730 #1: ((&(&wb->dwork)->work)){+.+.+.}, at: [<ffffffff8107f083>] process_one_work+0x173/0x730 #2: (&type->s_umount_key#44){+++++.}, at: [<ffffffff811e6805>] trylock_super+0x25/0x60 CPU: 5 PID: 6 Comm: kworker/u16:0 Tainted: G OE 4.3.0+ #3 Hardware name: Red Hat KVM, BIOS Bochs 01/01/2011 Workqueue: writeback wb_workfn (flush-btrfs-108) ffffffff81a3abab ffff88042e282ba8 ffffffff8130191b ffffffff81a3abab 0000000000000c76 ffff88042e282ba8 ffff88042e27c180 ffff88042e282bd8 ffffffff8108ed95 ffff880400000004 0000000000000000 0000000000000c76 Call Trace: [<ffffffff8130191b>] dump_stack+0x4f/0x74 [<ffffffff8108ed95>] ___might_sleep+0x185/0x240 [<ffffffff8108eea2>] __might_sleep+0x52/0x90 [<ffffffff811817e8>] __alloc_pages_nodemask+0x268/0x410 [<ffffffff8109a43c>] ? sched_clock_local+0x1c/0x90 [<ffffffff8109a6d1>] ? local_clock+0x21/0x40 [<ffffffff810b9eb0>] ? __lock_release+0x420/0x510 [<ffffffff810b534c>] ? __lock_acquired+0x16c/0x3c0 [<ffffffff811ca265>] alloc_pages_current+0xc5/0x210 [<ffffffffa0577105>] ? rbio_is_full+0x55/0x70 [btrfs] [<ffffffff810b7ed8>] ? mark_held_locks+0x78/0xa0 [<ffffffff81666d50>] ? _raw_spin_unlock_irqrestore+0x40/0x60 [<ffffffffa0578c0a>] full_stripe_write+0x5a/0xc0 [btrfs] [<ffffffffa0578ca9>] __raid56_parity_write+0x39/0x60 [btrfs] [<ffffffffa0578deb>] run_plug+0x11b/0x140 [btrfs] [<ffffffffa0578e33>] btrfs_raid_unplug+0x23/0x70 [btrfs] [<ffffffff812d36c2>] blk_flush_plug_list+0x82/0x1f0 [<ffffffff812e0349>] blk_sq_make_request+0x1f9/0x740 [<ffffffff812ceba2>] ? generic_make_request_checks+0x222/0x7c0 [<ffffffff812cf264>] ? blk_queue_enter+0x124/0x310 [<ffffffff812cf1d2>] ? blk_queue_enter+0x92/0x310 [<ffffffff812d0ae2>] generic_make_request+0x172/0x2c0 [<ffffffff812d0ad4>] ? generic_make_request+0x164/0x2c0 [<ffffffff812d0ca0>] submit_bio+0x70/0x140 [<ffffffffa0577b29>] ? rbio_add_io_page+0x99/0x150 [btrfs] [<ffffffffa0578a89>] finish_rmw+0x4d9/0x600 [btrfs] [<ffffffffa0578c4c>] full_stripe_write+0x9c/0xc0 [btrfs] [<ffffffffa057ab7f>] raid56_parity_write+0xef/0x160 [btrfs] [<ffffffffa052bd83>] btrfs_map_bio+0xe3/0x2d0 [btrfs] [<ffffffffa04fbd6d>] btrfs_submit_bio_hook+0x8d/0x1d0 [btrfs] [<ffffffffa05173c4>] submit_one_bio+0x74/0xb0 [btrfs] [<ffffffffa0517f55>] submit_extent_page+0xe5/0x1c0 [btrfs] [<ffffffffa0519b18>] __extent_writepage_io+0x408/0x4c0 [btrfs] [<ffffffffa05179c0>] ? alloc_dummy_extent_buffer+0x140/0x140 [btrfs] [<ffffffffa051dc88>] __extent_writepage+0x218/0x3a0 [btrfs] [<ffffffff810b7ed8>] ? mark_held_locks+0x78/0xa0 [<ffffffffa051e2c9>] extent_write_cache_pages.clone.0+0x2f9/0x400 [btrfs] [<ffffffffa051e422>] extent_writepages+0x52/0x70 [btrfs] [<ffffffffa05001f0>] ? btrfs_set_inode_index+0x70/0x70 [btrfs] [<ffffffffa04fcc17>] btrfs_writepages+0x27/0x30 [btrfs] [<ffffffff81184df3>] do_writepages+0x23/0x40 [<ffffffff81212229>] __writeback_single_inode+0x89/0x4d0 [<ffffffff81212a60>] ? writeback_sb_inodes+0x260/0x480 [<ffffffff81212a60>] ? writeback_sb_inodes+0x260/0x480 [<ffffffff8121295f>] ? writeback_sb_inodes+0x15f/0x480 [<ffffffff81212ad2>] writeback_sb_inodes+0x2d2/0x480 [<ffffffff810b1397>] ? down_read_trylock+0x57/0x60 [<ffffffff811e6805>] ? trylock_super+0x25/0x60 [<ffffffff810d629f>] ? rcu_read_lock_sched_held+0x4f/0x90 [<ffffffff81212d0c>] __writeback_inodes_wb+0x8c/0xc0 [<ffffffff812130b5>] wb_writeback+0x2b5/0x500 [<ffffffff810b7ed8>] ? mark_held_locks+0x78/0xa0 [<ffffffff810660a8>] ? __local_bh_enable_ip+0x68/0xc0 [<ffffffff81213362>] ? wb_do_writeback+0x62/0x310 [<ffffffff812133c1>] wb_do_writeback+0xc1/0x310 [<ffffffff8107c3d9>] ? set_worker_desc+0x79/0x90 [<ffffffff81213842>] wb_workfn+0x92/0x330 [<ffffffff8107f133>] process_one_work+0x223/0x730 [<ffffffff8107f083>] ? process_one_work+0x173/0x730 [<ffffffff8108035f>] ? worker_thread+0x18f/0x430 [<ffffffff810802ed>] worker_thread+0x11d/0x430 [<ffffffff810801d0>] ? maybe_create_worker+0xf0/0xf0 [<ffffffff810801d0>] ? maybe_create_worker+0xf0/0xf0 [<ffffffff810858df>] kthread+0xef/0x110 [<ffffffff8108f74e>] ? schedule_tail+0x1e/0xd0 [<ffffffff810857f0>] ? __init_kthread_worker+0x70/0x70 [<ffffffff816673bf>] ret_from_fork+0x3f/0x70 [<ffffffff810857f0>] ? __init_kthread_worker+0x70/0x70 The issue is that we've got the software context pinned while calling blk_flush_plug_list(), which flushes callbacks that are allowed to sleep. btrfs and raid has such callbacks. Flip the checks around a bit, so we can enable preempt a bit earlier and flush plugs without having preempt disabled. This only affects blk-mq driven devices, and only those that register a single queue. Reported-by: Liu Bo <bo.li.liu@oracle.com> Tested-by: Liu Bo <bo.li.liu@oracle.com> Cc: stable@kernel.org Signed-off-by: Jens Axboe <axboe@fb.com>
2015-11-21 03:29:45 +00:00
if (request_count >= BLK_MAX_REQUEST_COUNT || (last &&
blk_rq_bytes(last) >= BLK_PLUG_FLUSH_SIZE)) {
blk_flush_plug_list(plug, false);
trace_block_plug(q);
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
}
blk-mq: fix calling unplug callbacks with preempt disabled Liu reported that running certain parts of xfstests threw the following error: BUG: sleeping function called from invalid context at mm/page_alloc.c:3190 in_atomic(): 1, irqs_disabled(): 0, pid: 6, name: kworker/u16:0 3 locks held by kworker/u16:0/6: #0: ("writeback"){++++.+}, at: [<ffffffff8107f083>] process_one_work+0x173/0x730 #1: ((&(&wb->dwork)->work)){+.+.+.}, at: [<ffffffff8107f083>] process_one_work+0x173/0x730 #2: (&type->s_umount_key#44){+++++.}, at: [<ffffffff811e6805>] trylock_super+0x25/0x60 CPU: 5 PID: 6 Comm: kworker/u16:0 Tainted: G OE 4.3.0+ #3 Hardware name: Red Hat KVM, BIOS Bochs 01/01/2011 Workqueue: writeback wb_workfn (flush-btrfs-108) ffffffff81a3abab ffff88042e282ba8 ffffffff8130191b ffffffff81a3abab 0000000000000c76 ffff88042e282ba8 ffff88042e27c180 ffff88042e282bd8 ffffffff8108ed95 ffff880400000004 0000000000000000 0000000000000c76 Call Trace: [<ffffffff8130191b>] dump_stack+0x4f/0x74 [<ffffffff8108ed95>] ___might_sleep+0x185/0x240 [<ffffffff8108eea2>] __might_sleep+0x52/0x90 [<ffffffff811817e8>] __alloc_pages_nodemask+0x268/0x410 [<ffffffff8109a43c>] ? sched_clock_local+0x1c/0x90 [<ffffffff8109a6d1>] ? local_clock+0x21/0x40 [<ffffffff810b9eb0>] ? __lock_release+0x420/0x510 [<ffffffff810b534c>] ? __lock_acquired+0x16c/0x3c0 [<ffffffff811ca265>] alloc_pages_current+0xc5/0x210 [<ffffffffa0577105>] ? rbio_is_full+0x55/0x70 [btrfs] [<ffffffff810b7ed8>] ? mark_held_locks+0x78/0xa0 [<ffffffff81666d50>] ? _raw_spin_unlock_irqrestore+0x40/0x60 [<ffffffffa0578c0a>] full_stripe_write+0x5a/0xc0 [btrfs] [<ffffffffa0578ca9>] __raid56_parity_write+0x39/0x60 [btrfs] [<ffffffffa0578deb>] run_plug+0x11b/0x140 [btrfs] [<ffffffffa0578e33>] btrfs_raid_unplug+0x23/0x70 [btrfs] [<ffffffff812d36c2>] blk_flush_plug_list+0x82/0x1f0 [<ffffffff812e0349>] blk_sq_make_request+0x1f9/0x740 [<ffffffff812ceba2>] ? generic_make_request_checks+0x222/0x7c0 [<ffffffff812cf264>] ? blk_queue_enter+0x124/0x310 [<ffffffff812cf1d2>] ? blk_queue_enter+0x92/0x310 [<ffffffff812d0ae2>] generic_make_request+0x172/0x2c0 [<ffffffff812d0ad4>] ? generic_make_request+0x164/0x2c0 [<ffffffff812d0ca0>] submit_bio+0x70/0x140 [<ffffffffa0577b29>] ? rbio_add_io_page+0x99/0x150 [btrfs] [<ffffffffa0578a89>] finish_rmw+0x4d9/0x600 [btrfs] [<ffffffffa0578c4c>] full_stripe_write+0x9c/0xc0 [btrfs] [<ffffffffa057ab7f>] raid56_parity_write+0xef/0x160 [btrfs] [<ffffffffa052bd83>] btrfs_map_bio+0xe3/0x2d0 [btrfs] [<ffffffffa04fbd6d>] btrfs_submit_bio_hook+0x8d/0x1d0 [btrfs] [<ffffffffa05173c4>] submit_one_bio+0x74/0xb0 [btrfs] [<ffffffffa0517f55>] submit_extent_page+0xe5/0x1c0 [btrfs] [<ffffffffa0519b18>] __extent_writepage_io+0x408/0x4c0 [btrfs] [<ffffffffa05179c0>] ? alloc_dummy_extent_buffer+0x140/0x140 [btrfs] [<ffffffffa051dc88>] __extent_writepage+0x218/0x3a0 [btrfs] [<ffffffff810b7ed8>] ? mark_held_locks+0x78/0xa0 [<ffffffffa051e2c9>] extent_write_cache_pages.clone.0+0x2f9/0x400 [btrfs] [<ffffffffa051e422>] extent_writepages+0x52/0x70 [btrfs] [<ffffffffa05001f0>] ? btrfs_set_inode_index+0x70/0x70 [btrfs] [<ffffffffa04fcc17>] btrfs_writepages+0x27/0x30 [btrfs] [<ffffffff81184df3>] do_writepages+0x23/0x40 [<ffffffff81212229>] __writeback_single_inode+0x89/0x4d0 [<ffffffff81212a60>] ? writeback_sb_inodes+0x260/0x480 [<ffffffff81212a60>] ? writeback_sb_inodes+0x260/0x480 [<ffffffff8121295f>] ? writeback_sb_inodes+0x15f/0x480 [<ffffffff81212ad2>] writeback_sb_inodes+0x2d2/0x480 [<ffffffff810b1397>] ? down_read_trylock+0x57/0x60 [<ffffffff811e6805>] ? trylock_super+0x25/0x60 [<ffffffff810d629f>] ? rcu_read_lock_sched_held+0x4f/0x90 [<ffffffff81212d0c>] __writeback_inodes_wb+0x8c/0xc0 [<ffffffff812130b5>] wb_writeback+0x2b5/0x500 [<ffffffff810b7ed8>] ? mark_held_locks+0x78/0xa0 [<ffffffff810660a8>] ? __local_bh_enable_ip+0x68/0xc0 [<ffffffff81213362>] ? wb_do_writeback+0x62/0x310 [<ffffffff812133c1>] wb_do_writeback+0xc1/0x310 [<ffffffff8107c3d9>] ? set_worker_desc+0x79/0x90 [<ffffffff81213842>] wb_workfn+0x92/0x330 [<ffffffff8107f133>] process_one_work+0x223/0x730 [<ffffffff8107f083>] ? process_one_work+0x173/0x730 [<ffffffff8108035f>] ? worker_thread+0x18f/0x430 [<ffffffff810802ed>] worker_thread+0x11d/0x430 [<ffffffff810801d0>] ? maybe_create_worker+0xf0/0xf0 [<ffffffff810801d0>] ? maybe_create_worker+0xf0/0xf0 [<ffffffff810858df>] kthread+0xef/0x110 [<ffffffff8108f74e>] ? schedule_tail+0x1e/0xd0 [<ffffffff810857f0>] ? __init_kthread_worker+0x70/0x70 [<ffffffff816673bf>] ret_from_fork+0x3f/0x70 [<ffffffff810857f0>] ? __init_kthread_worker+0x70/0x70 The issue is that we've got the software context pinned while calling blk_flush_plug_list(), which flushes callbacks that are allowed to sleep. btrfs and raid has such callbacks. Flip the checks around a bit, so we can enable preempt a bit earlier and flush plugs without having preempt disabled. This only affects blk-mq driven devices, and only those that register a single queue. Reported-by: Liu Bo <bo.li.liu@oracle.com> Tested-by: Liu Bo <bo.li.liu@oracle.com> Cc: stable@kernel.org Signed-off-by: Jens Axboe <axboe@fb.com>
2015-11-21 03:29:45 +00:00
list_add_tail(&rq->queuelist, &plug->mq_list);
} else if (plug && !blk_queue_nomerges(q)) {
blk_mq_bio_to_request(rq, bio);
/*
* We do limited plugging. If the bio can be merged, do that.
* Otherwise the existing request in the plug list will be
* issued. So the plug list will have one request at most
* The plug list might get flushed before this. If that happens,
* the plug list is empty, and same_queue_rq is invalid.
*/
if (list_empty(&plug->mq_list))
same_queue_rq = NULL;
if (same_queue_rq)
list_del_init(&same_queue_rq->queuelist);
list_add_tail(&rq->queuelist, &plug->mq_list);
blk_mq_put_ctx(data.ctx);
if (same_queue_rq) {
data.hctx = blk_mq_map_queue(q,
same_queue_rq->mq_ctx->cpu);
blk_mq_try_issue_directly(data.hctx, same_queue_rq,
&cookie);
}
} else if (q->nr_hw_queues > 1 && is_sync) {
blk_mq_put_ctx(data.ctx);
blk_mq_bio_to_request(rq, bio);
blk_mq_try_issue_directly(data.hctx, rq, &cookie);
} else if (q->elevator) {
blk-mq: fix schedule-while-atomic with scheduler attached We must have dropped the ctx before we call blk_mq_sched_insert_request() with can_block=true, otherwise we risk that a flush request can block on insertion if we are currently out of tags. [ 47.667190] BUG: scheduling while atomic: jbd2/sda2-8/2089/0x00000002 [ 47.674493] Modules linked in: x86_pkg_temp_thermal btrfs xor zlib_deflate raid6_pq sr_mod cdre [ 47.690572] Preemption disabled at: [ 47.690584] [<ffffffff81326c7c>] blk_mq_sched_get_request+0x6c/0x280 [ 47.701764] CPU: 1 PID: 2089 Comm: jbd2/sda2-8 Not tainted 4.11.0-rc7+ #271 [ 47.709630] Hardware name: Dell Inc. PowerEdge T630/0NT78X, BIOS 2.3.4 11/09/2016 [ 47.718081] Call Trace: [ 47.720903] dump_stack+0x4f/0x73 [ 47.724694] ? blk_mq_sched_get_request+0x6c/0x280 [ 47.730137] __schedule_bug+0x6c/0xc0 [ 47.734314] __schedule+0x559/0x780 [ 47.738302] schedule+0x3b/0x90 [ 47.741899] io_schedule+0x11/0x40 [ 47.745788] blk_mq_get_tag+0x167/0x2a0 [ 47.750162] ? remove_wait_queue+0x70/0x70 [ 47.754901] blk_mq_get_driver_tag+0x92/0xf0 [ 47.759758] blk_mq_sched_insert_request+0x134/0x170 [ 47.765398] ? blk_account_io_start+0xd0/0x270 [ 47.770679] blk_mq_make_request+0x1b2/0x850 [ 47.775766] generic_make_request+0xf7/0x2d0 [ 47.780860] submit_bio+0x5f/0x120 [ 47.784979] ? submit_bio+0x5f/0x120 [ 47.789631] submit_bh_wbc.isra.46+0x10d/0x130 [ 47.794902] submit_bh+0xb/0x10 [ 47.798719] journal_submit_commit_record+0x190/0x210 [ 47.804686] ? _raw_spin_unlock+0x13/0x30 [ 47.809480] jbd2_journal_commit_transaction+0x180a/0x1d00 [ 47.815925] kjournald2+0xb6/0x250 [ 47.820022] ? kjournald2+0xb6/0x250 [ 47.824328] ? remove_wait_queue+0x70/0x70 [ 47.829223] kthread+0x10e/0x140 [ 47.833147] ? commit_timeout+0x10/0x10 [ 47.837742] ? kthread_create_on_node+0x40/0x40 [ 47.843122] ret_from_fork+0x29/0x40 Fixes: a4d907b6a33b ("blk-mq: streamline blk_mq_make_request") Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-20 22:40:36 +00:00
blk_mq_put_ctx(data.ctx);
blk_mq_bio_to_request(rq, bio);
blk_mq_sched_insert_request(rq, false, true, true);
} else {
blk-mq: fix schedule-while-atomic with scheduler attached We must have dropped the ctx before we call blk_mq_sched_insert_request() with can_block=true, otherwise we risk that a flush request can block on insertion if we are currently out of tags. [ 47.667190] BUG: scheduling while atomic: jbd2/sda2-8/2089/0x00000002 [ 47.674493] Modules linked in: x86_pkg_temp_thermal btrfs xor zlib_deflate raid6_pq sr_mod cdre [ 47.690572] Preemption disabled at: [ 47.690584] [<ffffffff81326c7c>] blk_mq_sched_get_request+0x6c/0x280 [ 47.701764] CPU: 1 PID: 2089 Comm: jbd2/sda2-8 Not tainted 4.11.0-rc7+ #271 [ 47.709630] Hardware name: Dell Inc. PowerEdge T630/0NT78X, BIOS 2.3.4 11/09/2016 [ 47.718081] Call Trace: [ 47.720903] dump_stack+0x4f/0x73 [ 47.724694] ? blk_mq_sched_get_request+0x6c/0x280 [ 47.730137] __schedule_bug+0x6c/0xc0 [ 47.734314] __schedule+0x559/0x780 [ 47.738302] schedule+0x3b/0x90 [ 47.741899] io_schedule+0x11/0x40 [ 47.745788] blk_mq_get_tag+0x167/0x2a0 [ 47.750162] ? remove_wait_queue+0x70/0x70 [ 47.754901] blk_mq_get_driver_tag+0x92/0xf0 [ 47.759758] blk_mq_sched_insert_request+0x134/0x170 [ 47.765398] ? blk_account_io_start+0xd0/0x270 [ 47.770679] blk_mq_make_request+0x1b2/0x850 [ 47.775766] generic_make_request+0xf7/0x2d0 [ 47.780860] submit_bio+0x5f/0x120 [ 47.784979] ? submit_bio+0x5f/0x120 [ 47.789631] submit_bh_wbc.isra.46+0x10d/0x130 [ 47.794902] submit_bh+0xb/0x10 [ 47.798719] journal_submit_commit_record+0x190/0x210 [ 47.804686] ? _raw_spin_unlock+0x13/0x30 [ 47.809480] jbd2_journal_commit_transaction+0x180a/0x1d00 [ 47.815925] kjournald2+0xb6/0x250 [ 47.820022] ? kjournald2+0xb6/0x250 [ 47.824328] ? remove_wait_queue+0x70/0x70 [ 47.829223] kthread+0x10e/0x140 [ 47.833147] ? commit_timeout+0x10/0x10 [ 47.837742] ? kthread_create_on_node+0x40/0x40 [ 47.843122] ret_from_fork+0x29/0x40 Fixes: a4d907b6a33b ("blk-mq: streamline blk_mq_make_request") Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-20 22:40:36 +00:00
blk_mq_put_ctx(data.ctx);
blk_mq_bio_to_request(rq, bio);
blk_mq_queue_io(data.hctx, data.ctx, rq);
blk_mq_run_hw_queue(data.hctx, true);
}
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
return cookie;
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
}
void blk_mq_free_rqs(struct blk_mq_tag_set *set, struct blk_mq_tags *tags,
unsigned int hctx_idx)
{
struct page *page;
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
if (tags->rqs && set->ops->exit_request) {
int i;
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
for (i = 0; i < tags->nr_tags; i++) {
struct request *rq = tags->static_rqs[i];
if (!rq)
continue;
set->ops->exit_request(set, rq, hctx_idx);
tags->static_rqs[i] = NULL;
}
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
}
while (!list_empty(&tags->page_list)) {
page = list_first_entry(&tags->page_list, struct page, lru);
list_del_init(&page->lru);
/*
* Remove kmemleak object previously allocated in
* blk_mq_init_rq_map().
*/
kmemleak_free(page_address(page));
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
__free_pages(page, page->private);
}
}
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
void blk_mq_free_rq_map(struct blk_mq_tags *tags)
{
kfree(tags->rqs);
tags->rqs = NULL;
kfree(tags->static_rqs);
tags->static_rqs = NULL;
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
blk_mq_free_tags(tags);
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
}
struct blk_mq_tags *blk_mq_alloc_rq_map(struct blk_mq_tag_set *set,
unsigned int hctx_idx,
unsigned int nr_tags,
unsigned int reserved_tags)
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
{
struct blk_mq_tags *tags;
int node;
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
node = blk_mq_hw_queue_to_node(set->mq_map, hctx_idx);
if (node == NUMA_NO_NODE)
node = set->numa_node;
tags = blk_mq_init_tags(nr_tags, reserved_tags, node,
BLK_MQ_FLAG_TO_ALLOC_POLICY(set->flags));
if (!tags)
return NULL;
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
tags->rqs = kzalloc_node(nr_tags * sizeof(struct request *),
blk-mq: Avoid memory reclaim when remapping queues While stressing memory and IO at the same time we changed SMT settings, we were able to consistently trigger deadlocks in the mm system, which froze the entire machine. I think that under memory stress conditions, the large allocations performed by blk_mq_init_rq_map may trigger a reclaim, which stalls waiting on the block layer remmaping completion, thus deadlocking the system. The trace below was collected after the machine stalled, waiting for the hotplug event completion. The simplest fix for this is to make allocations in this path non-reclaimable, with GFP_NOIO. With this patch, We couldn't hit the issue anymore. This should apply on top of Jens's for-next branch cleanly. Changes since v1: - Use GFP_NOIO instead of GFP_NOWAIT. Call Trace: [c000000f0160aaf0] [c000000f0160ab50] 0xc000000f0160ab50 (unreliable) [c000000f0160acc0] [c000000000016624] __switch_to+0x2e4/0x430 [c000000f0160ad20] [c000000000b1a880] __schedule+0x310/0x9b0 [c000000f0160ae00] [c000000000b1af68] schedule+0x48/0xc0 [c000000f0160ae30] [c000000000b1b4b0] schedule_preempt_disabled+0x20/0x30 [c000000f0160ae50] [c000000000b1d4fc] __mutex_lock_slowpath+0xec/0x1f0 [c000000f0160aed0] [c000000000b1d678] mutex_lock+0x78/0xa0 [c000000f0160af00] [d000000019413cac] xfs_reclaim_inodes_ag+0x33c/0x380 [xfs] [c000000f0160b0b0] [d000000019415164] xfs_reclaim_inodes_nr+0x54/0x70 [xfs] [c000000f0160b0f0] [d0000000194297f8] xfs_fs_free_cached_objects+0x38/0x60 [xfs] [c000000f0160b120] [c0000000003172c8] super_cache_scan+0x1f8/0x210 [c000000f0160b190] [c00000000026301c] shrink_slab.part.13+0x21c/0x4c0 [c000000f0160b2d0] [c000000000268088] shrink_zone+0x2d8/0x3c0 [c000000f0160b380] [c00000000026834c] do_try_to_free_pages+0x1dc/0x520 [c000000f0160b450] [c00000000026876c] try_to_free_pages+0xdc/0x250 [c000000f0160b4e0] [c000000000251978] __alloc_pages_nodemask+0x868/0x10d0 [c000000f0160b6f0] [c000000000567030] blk_mq_init_rq_map+0x160/0x380 [c000000f0160b7a0] [c00000000056758c] blk_mq_map_swqueue+0x33c/0x360 [c000000f0160b820] [c000000000567904] blk_mq_queue_reinit+0x64/0xb0 [c000000f0160b850] [c00000000056a16c] blk_mq_queue_reinit_notify+0x19c/0x250 [c000000f0160b8a0] [c0000000000f5d38] notifier_call_chain+0x98/0x100 [c000000f0160b8f0] [c0000000000c5fb0] __cpu_notify+0x70/0xe0 [c000000f0160b930] [c0000000000c63c4] notify_prepare+0x44/0xb0 [c000000f0160b9b0] [c0000000000c52f4] cpuhp_invoke_callback+0x84/0x250 [c000000f0160ba10] [c0000000000c570c] cpuhp_up_callbacks+0x5c/0x120 [c000000f0160ba60] [c0000000000c7cb8] _cpu_up+0xf8/0x1d0 [c000000f0160bac0] [c0000000000c7eb0] do_cpu_up+0x120/0x150 [c000000f0160bb40] [c0000000006fe024] cpu_subsys_online+0x64/0xe0 [c000000f0160bb90] [c0000000006f5124] device_online+0xb4/0x120 [c000000f0160bbd0] [c0000000006f5244] online_store+0xb4/0xc0 [c000000f0160bc20] [c0000000006f0a68] dev_attr_store+0x68/0xa0 [c000000f0160bc60] [c0000000003ccc30] sysfs_kf_write+0x80/0xb0 [c000000f0160bca0] [c0000000003cbabc] kernfs_fop_write+0x17c/0x250 [c000000f0160bcf0] [c00000000030fe6c] __vfs_write+0x6c/0x1e0 [c000000f0160bd90] [c000000000311490] vfs_write+0xd0/0x270 [c000000f0160bde0] [c0000000003131fc] SyS_write+0x6c/0x110 [c000000f0160be30] [c000000000009204] system_call+0x38/0xec Signed-off-by: Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com> Cc: Brian King <brking@linux.vnet.ibm.com> Cc: Douglas Miller <dougmill@linux.vnet.ibm.com> Cc: linux-block@vger.kernel.org Cc: linux-scsi@vger.kernel.org Signed-off-by: Jens Axboe <axboe@fb.com>
2016-12-06 15:31:44 +00:00
GFP_NOIO | __GFP_NOWARN | __GFP_NORETRY,
node);
if (!tags->rqs) {
blk_mq_free_tags(tags);
return NULL;
}
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
tags->static_rqs = kzalloc_node(nr_tags * sizeof(struct request *),
GFP_NOIO | __GFP_NOWARN | __GFP_NORETRY,
node);
if (!tags->static_rqs) {
kfree(tags->rqs);
blk_mq_free_tags(tags);
return NULL;
}
return tags;
}
static size_t order_to_size(unsigned int order)
{
return (size_t)PAGE_SIZE << order;
}
blk-mq: replace timeout synchronization with a RCU and generation based scheme Currently, blk-mq timeout path synchronizes against the usual issue/completion path using a complex scheme involving atomic bitflags, REQ_ATOM_*, memory barriers and subtle memory coherence rules. Unfortunately, it contains quite a few holes. There's a complex dancing around REQ_ATOM_STARTED and REQ_ATOM_COMPLETE between issue/completion and timeout paths; however, they don't have a synchronization point across request recycle instances and it isn't clear what the barriers add. blk_mq_check_expired() can easily read STARTED from N-2'th iteration, deadline from N-1'th, blk_mark_rq_complete() against Nth instance. In fact, it's pretty easy to make blk_mq_check_expired() terminate a later instance of a request. If we induce 5 sec delay before time_after_eq() test in blk_mq_check_expired(), shorten the timeout to 2s, and issue back-to-back large IOs, blk-mq starts timing out requests spuriously pretty quickly. Nothing actually timed out. It just made the call on a recycle instance of a request and then terminated a later instance long after the original instance finished. The scenario isn't theoretical either. This patch replaces the broken synchronization mechanism with a RCU and generation number based one. 1. Each request has a u64 generation + state value, which can be updated only by the request owner. Whenever a request becomes in-flight, the generation number gets bumped up too. This provides the basis for the timeout path to distinguish different recycle instances of the request. Also, marking a request in-flight and setting its deadline are protected with a seqcount so that the timeout path can fetch both values coherently. 2. The timeout path fetches the generation, state and deadline. If the verdict is timeout, it records the generation into a dedicated request abortion field and does RCU wait. 3. The completion path is also protected by RCU (from the previous patch) and checks whether the current generation number and state match the abortion field. If so, it skips completion. 4. The timeout path, after RCU wait, scans requests again and terminates the ones whose generation and state still match the ones requested for abortion. By now, the timeout path knows that either the generation number and state changed if it lost the race or the completion will yield to it and can safely timeout the request. While it's more lines of code, it's conceptually simpler, doesn't depend on direct use of subtle memory ordering or coherence, and hopefully doesn't terminate the wrong instance. While this change makes REQ_ATOM_COMPLETE synchronization unnecessary between issue/complete and timeout paths, REQ_ATOM_COMPLETE isn't removed yet as it's still used in other places. Future patches will move all state tracking to the new mechanism and remove all bitops in the hot paths. Note that this patch adds a comment explaining a race condition in BLK_EH_RESET_TIMER path. The race has always been there and this patch doesn't change it. It's just documenting the existing race. v2: - Fixed BLK_EH_RESET_TIMER handling as pointed out by Jianchao. - s/request->gstate_seqc/request->gstate_seq/ as suggested by Peter. - READ_ONCE() added in blk_mq_rq_update_state() as suggested by Peter. v3: - Fixed possible extended seqcount / u64_stats_sync read looping spotted by Peter. - MQ_RQ_IDLE was incorrectly being set in complete_request instead of free_request. Fixed. v4: - Rebased on top of hctx_lock() refactoring patch. - Added comment explaining the use of hctx_lock() in completion path. v5: - Added comments requested by Bart. - Note the addition of BLK_EH_RESET_TIMER race condition in the commit message. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: "jianchao.wang" <jianchao.w.wang@oracle.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Bart Van Assche <Bart.VanAssche@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-09 16:29:48 +00:00
static int blk_mq_init_request(struct blk_mq_tag_set *set, struct request *rq,
unsigned int hctx_idx, int node)
{
int ret;
if (set->ops->init_request) {
ret = set->ops->init_request(set, rq, hctx_idx, node);
if (ret)
return ret;
}
seqcount_init(&rq->gstate_seq);
u64_stats_init(&rq->aborted_gstate_sync);
/*
* start gstate with gen 1 instead of 0, otherwise it will be equal
* to aborted_gstate, and be identified timed out by
* blk_mq_terminate_expired.
*/
WRITE_ONCE(rq->gstate, MQ_RQ_GEN_INC);
blk-mq: replace timeout synchronization with a RCU and generation based scheme Currently, blk-mq timeout path synchronizes against the usual issue/completion path using a complex scheme involving atomic bitflags, REQ_ATOM_*, memory barriers and subtle memory coherence rules. Unfortunately, it contains quite a few holes. There's a complex dancing around REQ_ATOM_STARTED and REQ_ATOM_COMPLETE between issue/completion and timeout paths; however, they don't have a synchronization point across request recycle instances and it isn't clear what the barriers add. blk_mq_check_expired() can easily read STARTED from N-2'th iteration, deadline from N-1'th, blk_mark_rq_complete() against Nth instance. In fact, it's pretty easy to make blk_mq_check_expired() terminate a later instance of a request. If we induce 5 sec delay before time_after_eq() test in blk_mq_check_expired(), shorten the timeout to 2s, and issue back-to-back large IOs, blk-mq starts timing out requests spuriously pretty quickly. Nothing actually timed out. It just made the call on a recycle instance of a request and then terminated a later instance long after the original instance finished. The scenario isn't theoretical either. This patch replaces the broken synchronization mechanism with a RCU and generation number based one. 1. Each request has a u64 generation + state value, which can be updated only by the request owner. Whenever a request becomes in-flight, the generation number gets bumped up too. This provides the basis for the timeout path to distinguish different recycle instances of the request. Also, marking a request in-flight and setting its deadline are protected with a seqcount so that the timeout path can fetch both values coherently. 2. The timeout path fetches the generation, state and deadline. If the verdict is timeout, it records the generation into a dedicated request abortion field and does RCU wait. 3. The completion path is also protected by RCU (from the previous patch) and checks whether the current generation number and state match the abortion field. If so, it skips completion. 4. The timeout path, after RCU wait, scans requests again and terminates the ones whose generation and state still match the ones requested for abortion. By now, the timeout path knows that either the generation number and state changed if it lost the race or the completion will yield to it and can safely timeout the request. While it's more lines of code, it's conceptually simpler, doesn't depend on direct use of subtle memory ordering or coherence, and hopefully doesn't terminate the wrong instance. While this change makes REQ_ATOM_COMPLETE synchronization unnecessary between issue/complete and timeout paths, REQ_ATOM_COMPLETE isn't removed yet as it's still used in other places. Future patches will move all state tracking to the new mechanism and remove all bitops in the hot paths. Note that this patch adds a comment explaining a race condition in BLK_EH_RESET_TIMER path. The race has always been there and this patch doesn't change it. It's just documenting the existing race. v2: - Fixed BLK_EH_RESET_TIMER handling as pointed out by Jianchao. - s/request->gstate_seqc/request->gstate_seq/ as suggested by Peter. - READ_ONCE() added in blk_mq_rq_update_state() as suggested by Peter. v3: - Fixed possible extended seqcount / u64_stats_sync read looping spotted by Peter. - MQ_RQ_IDLE was incorrectly being set in complete_request instead of free_request. Fixed. v4: - Rebased on top of hctx_lock() refactoring patch. - Added comment explaining the use of hctx_lock() in completion path. v5: - Added comments requested by Bart. - Note the addition of BLK_EH_RESET_TIMER race condition in the commit message. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: "jianchao.wang" <jianchao.w.wang@oracle.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Bart Van Assche <Bart.VanAssche@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-09 16:29:48 +00:00
return 0;
}
int blk_mq_alloc_rqs(struct blk_mq_tag_set *set, struct blk_mq_tags *tags,
unsigned int hctx_idx, unsigned int depth)
{
unsigned int i, j, entries_per_page, max_order = 4;
size_t rq_size, left;
int node;
node = blk_mq_hw_queue_to_node(set->mq_map, hctx_idx);
if (node == NUMA_NO_NODE)
node = set->numa_node;
INIT_LIST_HEAD(&tags->page_list);
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
/*
* rq_size is the size of the request plus driver payload, rounded
* to the cacheline size
*/
rq_size = round_up(sizeof(struct request) + set->cmd_size,
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
cache_line_size());
left = rq_size * depth;
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
for (i = 0; i < depth; ) {
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
int this_order = max_order;
struct page *page;
int to_do;
void *p;
while (this_order && left < order_to_size(this_order - 1))
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
this_order--;
do {
page = alloc_pages_node(node,
blk-mq: Avoid memory reclaim when remapping queues While stressing memory and IO at the same time we changed SMT settings, we were able to consistently trigger deadlocks in the mm system, which froze the entire machine. I think that under memory stress conditions, the large allocations performed by blk_mq_init_rq_map may trigger a reclaim, which stalls waiting on the block layer remmaping completion, thus deadlocking the system. The trace below was collected after the machine stalled, waiting for the hotplug event completion. The simplest fix for this is to make allocations in this path non-reclaimable, with GFP_NOIO. With this patch, We couldn't hit the issue anymore. This should apply on top of Jens's for-next branch cleanly. Changes since v1: - Use GFP_NOIO instead of GFP_NOWAIT. Call Trace: [c000000f0160aaf0] [c000000f0160ab50] 0xc000000f0160ab50 (unreliable) [c000000f0160acc0] [c000000000016624] __switch_to+0x2e4/0x430 [c000000f0160ad20] [c000000000b1a880] __schedule+0x310/0x9b0 [c000000f0160ae00] [c000000000b1af68] schedule+0x48/0xc0 [c000000f0160ae30] [c000000000b1b4b0] schedule_preempt_disabled+0x20/0x30 [c000000f0160ae50] [c000000000b1d4fc] __mutex_lock_slowpath+0xec/0x1f0 [c000000f0160aed0] [c000000000b1d678] mutex_lock+0x78/0xa0 [c000000f0160af00] [d000000019413cac] xfs_reclaim_inodes_ag+0x33c/0x380 [xfs] [c000000f0160b0b0] [d000000019415164] xfs_reclaim_inodes_nr+0x54/0x70 [xfs] [c000000f0160b0f0] [d0000000194297f8] xfs_fs_free_cached_objects+0x38/0x60 [xfs] [c000000f0160b120] [c0000000003172c8] super_cache_scan+0x1f8/0x210 [c000000f0160b190] [c00000000026301c] shrink_slab.part.13+0x21c/0x4c0 [c000000f0160b2d0] [c000000000268088] shrink_zone+0x2d8/0x3c0 [c000000f0160b380] [c00000000026834c] do_try_to_free_pages+0x1dc/0x520 [c000000f0160b450] [c00000000026876c] try_to_free_pages+0xdc/0x250 [c000000f0160b4e0] [c000000000251978] __alloc_pages_nodemask+0x868/0x10d0 [c000000f0160b6f0] [c000000000567030] blk_mq_init_rq_map+0x160/0x380 [c000000f0160b7a0] [c00000000056758c] blk_mq_map_swqueue+0x33c/0x360 [c000000f0160b820] [c000000000567904] blk_mq_queue_reinit+0x64/0xb0 [c000000f0160b850] [c00000000056a16c] blk_mq_queue_reinit_notify+0x19c/0x250 [c000000f0160b8a0] [c0000000000f5d38] notifier_call_chain+0x98/0x100 [c000000f0160b8f0] [c0000000000c5fb0] __cpu_notify+0x70/0xe0 [c000000f0160b930] [c0000000000c63c4] notify_prepare+0x44/0xb0 [c000000f0160b9b0] [c0000000000c52f4] cpuhp_invoke_callback+0x84/0x250 [c000000f0160ba10] [c0000000000c570c] cpuhp_up_callbacks+0x5c/0x120 [c000000f0160ba60] [c0000000000c7cb8] _cpu_up+0xf8/0x1d0 [c000000f0160bac0] [c0000000000c7eb0] do_cpu_up+0x120/0x150 [c000000f0160bb40] [c0000000006fe024] cpu_subsys_online+0x64/0xe0 [c000000f0160bb90] [c0000000006f5124] device_online+0xb4/0x120 [c000000f0160bbd0] [c0000000006f5244] online_store+0xb4/0xc0 [c000000f0160bc20] [c0000000006f0a68] dev_attr_store+0x68/0xa0 [c000000f0160bc60] [c0000000003ccc30] sysfs_kf_write+0x80/0xb0 [c000000f0160bca0] [c0000000003cbabc] kernfs_fop_write+0x17c/0x250 [c000000f0160bcf0] [c00000000030fe6c] __vfs_write+0x6c/0x1e0 [c000000f0160bd90] [c000000000311490] vfs_write+0xd0/0x270 [c000000f0160bde0] [c0000000003131fc] SyS_write+0x6c/0x110 [c000000f0160be30] [c000000000009204] system_call+0x38/0xec Signed-off-by: Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com> Cc: Brian King <brking@linux.vnet.ibm.com> Cc: Douglas Miller <dougmill@linux.vnet.ibm.com> Cc: linux-block@vger.kernel.org Cc: linux-scsi@vger.kernel.org Signed-off-by: Jens Axboe <axboe@fb.com>
2016-12-06 15:31:44 +00:00
GFP_NOIO | __GFP_NOWARN | __GFP_NORETRY | __GFP_ZERO,
this_order);
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
if (page)
break;
if (!this_order--)
break;
if (order_to_size(this_order) < rq_size)
break;
} while (1);
if (!page)
goto fail;
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
page->private = this_order;
list_add_tail(&page->lru, &tags->page_list);
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
p = page_address(page);
/*
* Allow kmemleak to scan these pages as they contain pointers
* to additional allocations like via ops->init_request().
*/
blk-mq: Avoid memory reclaim when remapping queues While stressing memory and IO at the same time we changed SMT settings, we were able to consistently trigger deadlocks in the mm system, which froze the entire machine. I think that under memory stress conditions, the large allocations performed by blk_mq_init_rq_map may trigger a reclaim, which stalls waiting on the block layer remmaping completion, thus deadlocking the system. The trace below was collected after the machine stalled, waiting for the hotplug event completion. The simplest fix for this is to make allocations in this path non-reclaimable, with GFP_NOIO. With this patch, We couldn't hit the issue anymore. This should apply on top of Jens's for-next branch cleanly. Changes since v1: - Use GFP_NOIO instead of GFP_NOWAIT. Call Trace: [c000000f0160aaf0] [c000000f0160ab50] 0xc000000f0160ab50 (unreliable) [c000000f0160acc0] [c000000000016624] __switch_to+0x2e4/0x430 [c000000f0160ad20] [c000000000b1a880] __schedule+0x310/0x9b0 [c000000f0160ae00] [c000000000b1af68] schedule+0x48/0xc0 [c000000f0160ae30] [c000000000b1b4b0] schedule_preempt_disabled+0x20/0x30 [c000000f0160ae50] [c000000000b1d4fc] __mutex_lock_slowpath+0xec/0x1f0 [c000000f0160aed0] [c000000000b1d678] mutex_lock+0x78/0xa0 [c000000f0160af00] [d000000019413cac] xfs_reclaim_inodes_ag+0x33c/0x380 [xfs] [c000000f0160b0b0] [d000000019415164] xfs_reclaim_inodes_nr+0x54/0x70 [xfs] [c000000f0160b0f0] [d0000000194297f8] xfs_fs_free_cached_objects+0x38/0x60 [xfs] [c000000f0160b120] [c0000000003172c8] super_cache_scan+0x1f8/0x210 [c000000f0160b190] [c00000000026301c] shrink_slab.part.13+0x21c/0x4c0 [c000000f0160b2d0] [c000000000268088] shrink_zone+0x2d8/0x3c0 [c000000f0160b380] [c00000000026834c] do_try_to_free_pages+0x1dc/0x520 [c000000f0160b450] [c00000000026876c] try_to_free_pages+0xdc/0x250 [c000000f0160b4e0] [c000000000251978] __alloc_pages_nodemask+0x868/0x10d0 [c000000f0160b6f0] [c000000000567030] blk_mq_init_rq_map+0x160/0x380 [c000000f0160b7a0] [c00000000056758c] blk_mq_map_swqueue+0x33c/0x360 [c000000f0160b820] [c000000000567904] blk_mq_queue_reinit+0x64/0xb0 [c000000f0160b850] [c00000000056a16c] blk_mq_queue_reinit_notify+0x19c/0x250 [c000000f0160b8a0] [c0000000000f5d38] notifier_call_chain+0x98/0x100 [c000000f0160b8f0] [c0000000000c5fb0] __cpu_notify+0x70/0xe0 [c000000f0160b930] [c0000000000c63c4] notify_prepare+0x44/0xb0 [c000000f0160b9b0] [c0000000000c52f4] cpuhp_invoke_callback+0x84/0x250 [c000000f0160ba10] [c0000000000c570c] cpuhp_up_callbacks+0x5c/0x120 [c000000f0160ba60] [c0000000000c7cb8] _cpu_up+0xf8/0x1d0 [c000000f0160bac0] [c0000000000c7eb0] do_cpu_up+0x120/0x150 [c000000f0160bb40] [c0000000006fe024] cpu_subsys_online+0x64/0xe0 [c000000f0160bb90] [c0000000006f5124] device_online+0xb4/0x120 [c000000f0160bbd0] [c0000000006f5244] online_store+0xb4/0xc0 [c000000f0160bc20] [c0000000006f0a68] dev_attr_store+0x68/0xa0 [c000000f0160bc60] [c0000000003ccc30] sysfs_kf_write+0x80/0xb0 [c000000f0160bca0] [c0000000003cbabc] kernfs_fop_write+0x17c/0x250 [c000000f0160bcf0] [c00000000030fe6c] __vfs_write+0x6c/0x1e0 [c000000f0160bd90] [c000000000311490] vfs_write+0xd0/0x270 [c000000f0160bde0] [c0000000003131fc] SyS_write+0x6c/0x110 [c000000f0160be30] [c000000000009204] system_call+0x38/0xec Signed-off-by: Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com> Cc: Brian King <brking@linux.vnet.ibm.com> Cc: Douglas Miller <dougmill@linux.vnet.ibm.com> Cc: linux-block@vger.kernel.org Cc: linux-scsi@vger.kernel.org Signed-off-by: Jens Axboe <axboe@fb.com>
2016-12-06 15:31:44 +00:00
kmemleak_alloc(p, order_to_size(this_order), 1, GFP_NOIO);
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
entries_per_page = order_to_size(this_order) / rq_size;
to_do = min(entries_per_page, depth - i);
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
left -= to_do * rq_size;
for (j = 0; j < to_do; j++) {
struct request *rq = p;
tags->static_rqs[i] = rq;
blk-mq: replace timeout synchronization with a RCU and generation based scheme Currently, blk-mq timeout path synchronizes against the usual issue/completion path using a complex scheme involving atomic bitflags, REQ_ATOM_*, memory barriers and subtle memory coherence rules. Unfortunately, it contains quite a few holes. There's a complex dancing around REQ_ATOM_STARTED and REQ_ATOM_COMPLETE between issue/completion and timeout paths; however, they don't have a synchronization point across request recycle instances and it isn't clear what the barriers add. blk_mq_check_expired() can easily read STARTED from N-2'th iteration, deadline from N-1'th, blk_mark_rq_complete() against Nth instance. In fact, it's pretty easy to make blk_mq_check_expired() terminate a later instance of a request. If we induce 5 sec delay before time_after_eq() test in blk_mq_check_expired(), shorten the timeout to 2s, and issue back-to-back large IOs, blk-mq starts timing out requests spuriously pretty quickly. Nothing actually timed out. It just made the call on a recycle instance of a request and then terminated a later instance long after the original instance finished. The scenario isn't theoretical either. This patch replaces the broken synchronization mechanism with a RCU and generation number based one. 1. Each request has a u64 generation + state value, which can be updated only by the request owner. Whenever a request becomes in-flight, the generation number gets bumped up too. This provides the basis for the timeout path to distinguish different recycle instances of the request. Also, marking a request in-flight and setting its deadline are protected with a seqcount so that the timeout path can fetch both values coherently. 2. The timeout path fetches the generation, state and deadline. If the verdict is timeout, it records the generation into a dedicated request abortion field and does RCU wait. 3. The completion path is also protected by RCU (from the previous patch) and checks whether the current generation number and state match the abortion field. If so, it skips completion. 4. The timeout path, after RCU wait, scans requests again and terminates the ones whose generation and state still match the ones requested for abortion. By now, the timeout path knows that either the generation number and state changed if it lost the race or the completion will yield to it and can safely timeout the request. While it's more lines of code, it's conceptually simpler, doesn't depend on direct use of subtle memory ordering or coherence, and hopefully doesn't terminate the wrong instance. While this change makes REQ_ATOM_COMPLETE synchronization unnecessary between issue/complete and timeout paths, REQ_ATOM_COMPLETE isn't removed yet as it's still used in other places. Future patches will move all state tracking to the new mechanism and remove all bitops in the hot paths. Note that this patch adds a comment explaining a race condition in BLK_EH_RESET_TIMER path. The race has always been there and this patch doesn't change it. It's just documenting the existing race. v2: - Fixed BLK_EH_RESET_TIMER handling as pointed out by Jianchao. - s/request->gstate_seqc/request->gstate_seq/ as suggested by Peter. - READ_ONCE() added in blk_mq_rq_update_state() as suggested by Peter. v3: - Fixed possible extended seqcount / u64_stats_sync read looping spotted by Peter. - MQ_RQ_IDLE was incorrectly being set in complete_request instead of free_request. Fixed. v4: - Rebased on top of hctx_lock() refactoring patch. - Added comment explaining the use of hctx_lock() in completion path. v5: - Added comments requested by Bart. - Note the addition of BLK_EH_RESET_TIMER race condition in the commit message. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: "jianchao.wang" <jianchao.w.wang@oracle.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Bart Van Assche <Bart.VanAssche@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-09 16:29:48 +00:00
if (blk_mq_init_request(set, rq, hctx_idx, node)) {
tags->static_rqs[i] = NULL;
goto fail;
}
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
p += rq_size;
i++;
}
}
return 0;
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
fail:
blk_mq_free_rqs(set, tags, hctx_idx);
return -ENOMEM;
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
}
/*
* 'cpu' is going away. splice any existing rq_list entries from this
* software queue to the hw queue dispatch list, and ensure that it
* gets run.
*/
static int blk_mq_hctx_notify_dead(unsigned int cpu, struct hlist_node *node)
{
struct blk_mq_hw_ctx *hctx;
struct blk_mq_ctx *ctx;
LIST_HEAD(tmp);
hctx = hlist_entry_safe(node, struct blk_mq_hw_ctx, cpuhp_dead);
ctx = __blk_mq_get_ctx(hctx->queue, cpu);
spin_lock(&ctx->lock);
if (!list_empty(&ctx->rq_list)) {
list_splice_init(&ctx->rq_list, &tmp);
blk_mq_hctx_clear_pending(hctx, ctx);
}
spin_unlock(&ctx->lock);
if (list_empty(&tmp))
return 0;
spin_lock(&hctx->lock);
list_splice_tail_init(&tmp, &hctx->dispatch);
spin_unlock(&hctx->lock);
blk_mq_run_hw_queue(hctx, true);
return 0;
}
static void blk_mq_remove_cpuhp(struct blk_mq_hw_ctx *hctx)
{
cpuhp_state_remove_instance_nocalls(CPUHP_BLK_MQ_DEAD,
&hctx->cpuhp_dead);
}
/* hctx->ctxs will be freed in queue's release handler */
static void blk_mq_exit_hctx(struct request_queue *q,
struct blk_mq_tag_set *set,
struct blk_mq_hw_ctx *hctx, unsigned int hctx_idx)
{
blk_mq_debugfs_unregister_hctx(hctx);
blk-mq: fix kernel oops in blk_mq_tag_idle() HW queues may be unmapped in some cases, such as blk_mq_update_nr_hw_queues(), then we need to check it before calling blk_mq_tag_idle(), otherwise the following kernel oops can be triggered, so fix it by checking if the hw queue is unmapped since it doesn't make sense to idle the tags any more after hw queues are unmapped. [ 440.771298] Workqueue: nvme-wq nvme_rdma_del_ctrl_work [nvme_rdma] [ 440.779104] task: ffff894bae755ee0 ti: ffff893bf9bc8000 task.ti: ffff893bf9bc8000 [ 440.788359] RIP: 0010:[<ffffffffb730e2b4>] [<ffffffffb730e2b4>] __blk_mq_tag_idle+0x24/0x40 [ 440.798697] RSP: 0018:ffff893bf9bcbd10 EFLAGS: 00010286 [ 440.805538] RAX: 0000000000000000 RBX: ffff895bb131dc00 RCX: 000000000000011f [ 440.814426] RDX: 00000000ffffffff RSI: 0000000000000120 RDI: ffff895bb131dc00 [ 440.823301] RBP: ffff893bf9bcbd10 R08: 000000000001b860 R09: 4a51d361c00c0000 [ 440.832193] R10: b5907f32b4cc7003 R11: ffffd6cabfb57000 R12: ffff894bafd1e008 [ 440.841091] R13: 0000000000000001 R14: ffff895baf770000 R15: 0000000000000080 [ 440.849988] FS: 0000000000000000(0000) GS:ffff894bbdcc0000(0000) knlGS:0000000000000000 [ 440.859955] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 440.867274] CR2: 0000000000000008 CR3: 000000103d098000 CR4: 00000000001407e0 [ 440.876169] Call Trace: [ 440.879818] [<ffffffffb7309d68>] blk_mq_exit_hctx+0xd8/0xe0 [ 440.887051] [<ffffffffb730dc40>] blk_mq_free_queue+0xf0/0x160 [ 440.894465] [<ffffffffb72ff679>] blk_cleanup_queue+0xd9/0x150 [ 440.901881] [<ffffffffc08a802b>] nvme_ns_remove+0x5b/0xb0 [nvme_core] [ 440.910068] [<ffffffffc08a811b>] nvme_remove_namespaces+0x3b/0x60 [nvme_core] [ 440.919026] [<ffffffffc08b817b>] __nvme_rdma_remove_ctrl+0x2b/0xb0 [nvme_rdma] [ 440.928079] [<ffffffffc08b8237>] nvme_rdma_del_ctrl_work+0x17/0x20 [nvme_rdma] [ 440.937126] [<ffffffffb70ab58a>] process_one_work+0x17a/0x440 [ 440.944517] [<ffffffffb70ac3a8>] worker_thread+0x278/0x3c0 [ 440.951607] [<ffffffffb70ac130>] ? manage_workers.isra.24+0x2a0/0x2a0 [ 440.959760] [<ffffffffb70b352f>] kthread+0xcf/0xe0 [ 440.966055] [<ffffffffb70b3460>] ? insert_kthread_work+0x40/0x40 [ 440.973715] [<ffffffffb76d8658>] ret_from_fork+0x58/0x90 [ 440.980586] [<ffffffffb70b3460>] ? insert_kthread_work+0x40/0x40 [ 440.988229] Code: 5b 41 5c 5d c3 66 90 0f 1f 44 00 00 48 8b 87 20 01 00 00 f0 0f ba 77 40 01 19 d2 85 d2 75 08 c3 0f 1f 80 00 00 00 00 55 48 89 e5 <f0> ff 48 08 48 8d 78 10 e8 7f 0f 05 00 5d c3 0f 1f 00 66 2e 0f [ 441.011620] RIP [<ffffffffb730e2b4>] __blk_mq_tag_idle+0x24/0x40 [ 441.019301] RSP <ffff893bf9bcbd10> [ 441.024052] CR2: 0000000000000008 Reported-by: Zhang Yi <yizhan@redhat.com> Tested-by: Zhang Yi <yizhan@redhat.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-09 13:28:29 +00:00
if (blk_mq_hw_queue_mapped(hctx))
blk_mq_tag_idle(hctx);
if (set->ops->exit_request)
set->ops->exit_request(set, hctx->fq->flush_rq, hctx_idx);
blk_mq_sched_exit_hctx(q, hctx, hctx_idx);
if (set->ops->exit_hctx)
set->ops->exit_hctx(hctx, hctx_idx);
if (hctx->flags & BLK_MQ_F_BLOCKING)
cleanup_srcu_struct(hctx->srcu);
blk_mq_remove_cpuhp(hctx);
blk_free_flush_queue(hctx->fq);
sbitmap_free(&hctx->ctx_map);
}
static void blk_mq_exit_hw_queues(struct request_queue *q,
struct blk_mq_tag_set *set, int nr_queue)
{
struct blk_mq_hw_ctx *hctx;
unsigned int i;
queue_for_each_hw_ctx(q, hctx, i) {
if (i == nr_queue)
break;
blk_mq_exit_hctx(q, set, hctx, i);
}
}
static int blk_mq_init_hctx(struct request_queue *q,
struct blk_mq_tag_set *set,
struct blk_mq_hw_ctx *hctx, unsigned hctx_idx)
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
{
int node;
node = hctx->numa_node;
if (node == NUMA_NO_NODE)
node = hctx->numa_node = set->numa_node;
INIT_DELAYED_WORK(&hctx->run_work, blk_mq_run_work_fn);
spin_lock_init(&hctx->lock);
INIT_LIST_HEAD(&hctx->dispatch);
hctx->queue = q;
hctx->flags = set->flags & ~BLK_MQ_F_TAG_SHARED;
cpuhp_state_add_instance_nocalls(CPUHP_BLK_MQ_DEAD, &hctx->cpuhp_dead);
hctx->tags = set->tags[hctx_idx];
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
/*
* Allocate space for all possible cpus to avoid allocation at
* runtime
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
*/
hctx->ctxs = kmalloc_array_node(nr_cpu_ids, sizeof(void *),
GFP_KERNEL, node);
if (!hctx->ctxs)
goto unregister_cpu_notifier;
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
if (sbitmap_init_node(&hctx->ctx_map, nr_cpu_ids, ilog2(8), GFP_KERNEL,
node))
goto free_ctxs;
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
hctx->nr_ctx = 0;
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
init_waitqueue_func_entry(&hctx->dispatch_wait, blk_mq_dispatch_wake);
INIT_LIST_HEAD(&hctx->dispatch_wait.entry);
if (set->ops->init_hctx &&
set->ops->init_hctx(hctx, set->driver_data, hctx_idx))
goto free_bitmap;
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
if (blk_mq_sched_init_hctx(q, hctx, hctx_idx))
goto exit_hctx;
hctx->fq = blk_alloc_flush_queue(q, hctx->numa_node, set->cmd_size);
if (!hctx->fq)
goto sched_exit_hctx;
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
blk-mq: replace timeout synchronization with a RCU and generation based scheme Currently, blk-mq timeout path synchronizes against the usual issue/completion path using a complex scheme involving atomic bitflags, REQ_ATOM_*, memory barriers and subtle memory coherence rules. Unfortunately, it contains quite a few holes. There's a complex dancing around REQ_ATOM_STARTED and REQ_ATOM_COMPLETE between issue/completion and timeout paths; however, they don't have a synchronization point across request recycle instances and it isn't clear what the barriers add. blk_mq_check_expired() can easily read STARTED from N-2'th iteration, deadline from N-1'th, blk_mark_rq_complete() against Nth instance. In fact, it's pretty easy to make blk_mq_check_expired() terminate a later instance of a request. If we induce 5 sec delay before time_after_eq() test in blk_mq_check_expired(), shorten the timeout to 2s, and issue back-to-back large IOs, blk-mq starts timing out requests spuriously pretty quickly. Nothing actually timed out. It just made the call on a recycle instance of a request and then terminated a later instance long after the original instance finished. The scenario isn't theoretical either. This patch replaces the broken synchronization mechanism with a RCU and generation number based one. 1. Each request has a u64 generation + state value, which can be updated only by the request owner. Whenever a request becomes in-flight, the generation number gets bumped up too. This provides the basis for the timeout path to distinguish different recycle instances of the request. Also, marking a request in-flight and setting its deadline are protected with a seqcount so that the timeout path can fetch both values coherently. 2. The timeout path fetches the generation, state and deadline. If the verdict is timeout, it records the generation into a dedicated request abortion field and does RCU wait. 3. The completion path is also protected by RCU (from the previous patch) and checks whether the current generation number and state match the abortion field. If so, it skips completion. 4. The timeout path, after RCU wait, scans requests again and terminates the ones whose generation and state still match the ones requested for abortion. By now, the timeout path knows that either the generation number and state changed if it lost the race or the completion will yield to it and can safely timeout the request. While it's more lines of code, it's conceptually simpler, doesn't depend on direct use of subtle memory ordering or coherence, and hopefully doesn't terminate the wrong instance. While this change makes REQ_ATOM_COMPLETE synchronization unnecessary between issue/complete and timeout paths, REQ_ATOM_COMPLETE isn't removed yet as it's still used in other places. Future patches will move all state tracking to the new mechanism and remove all bitops in the hot paths. Note that this patch adds a comment explaining a race condition in BLK_EH_RESET_TIMER path. The race has always been there and this patch doesn't change it. It's just documenting the existing race. v2: - Fixed BLK_EH_RESET_TIMER handling as pointed out by Jianchao. - s/request->gstate_seqc/request->gstate_seq/ as suggested by Peter. - READ_ONCE() added in blk_mq_rq_update_state() as suggested by Peter. v3: - Fixed possible extended seqcount / u64_stats_sync read looping spotted by Peter. - MQ_RQ_IDLE was incorrectly being set in complete_request instead of free_request. Fixed. v4: - Rebased on top of hctx_lock() refactoring patch. - Added comment explaining the use of hctx_lock() in completion path. v5: - Added comments requested by Bart. - Note the addition of BLK_EH_RESET_TIMER race condition in the commit message. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: "jianchao.wang" <jianchao.w.wang@oracle.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Bart Van Assche <Bart.VanAssche@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-09 16:29:48 +00:00
if (blk_mq_init_request(set, hctx->fq->flush_rq, hctx_idx, node))
goto free_fq;
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
if (hctx->flags & BLK_MQ_F_BLOCKING)
init_srcu_struct(hctx->srcu);
blk_mq_debugfs_register_hctx(q, hctx);
return 0;
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
free_fq:
kfree(hctx->fq);
sched_exit_hctx:
blk_mq_sched_exit_hctx(q, hctx, hctx_idx);
exit_hctx:
if (set->ops->exit_hctx)
set->ops->exit_hctx(hctx, hctx_idx);
free_bitmap:
sbitmap_free(&hctx->ctx_map);
free_ctxs:
kfree(hctx->ctxs);
unregister_cpu_notifier:
blk_mq_remove_cpuhp(hctx);
return -1;
}
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
static void blk_mq_init_cpu_queues(struct request_queue *q,
unsigned int nr_hw_queues)
{
unsigned int i;
for_each_possible_cpu(i) {
struct blk_mq_ctx *__ctx = per_cpu_ptr(q->queue_ctx, i);
struct blk_mq_hw_ctx *hctx;
__ctx->cpu = i;
spin_lock_init(&__ctx->lock);
INIT_LIST_HEAD(&__ctx->rq_list);
__ctx->queue = q;
/*
* Set local node, IFF we have more than one hw queue. If
* not, we remain on the home node of the device
*/
hctx = blk_mq_map_queue(q, i);
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
if (nr_hw_queues > 1 && hctx->numa_node == NUMA_NO_NODE)
hctx->numa_node = local_memory_node(cpu_to_node(i));
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
}
}
static bool __blk_mq_alloc_rq_map(struct blk_mq_tag_set *set, int hctx_idx)
{
int ret = 0;
set->tags[hctx_idx] = blk_mq_alloc_rq_map(set, hctx_idx,
set->queue_depth, set->reserved_tags);
if (!set->tags[hctx_idx])
return false;
ret = blk_mq_alloc_rqs(set, set->tags[hctx_idx], hctx_idx,
set->queue_depth);
if (!ret)
return true;
blk_mq_free_rq_map(set->tags[hctx_idx]);
set->tags[hctx_idx] = NULL;
return false;
}
static void blk_mq_free_map_and_requests(struct blk_mq_tag_set *set,
unsigned int hctx_idx)
{
if (set->tags[hctx_idx]) {
blk_mq_free_rqs(set, set->tags[hctx_idx], hctx_idx);
blk_mq_free_rq_map(set->tags[hctx_idx]);
set->tags[hctx_idx] = NULL;
}
}
static void blk_mq_map_swqueue(struct request_queue *q)
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
{
unsigned int i, hctx_idx;
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
struct blk_mq_hw_ctx *hctx;
struct blk_mq_ctx *ctx;
struct blk_mq_tag_set *set = q->tag_set;
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
/*
* Avoid others reading imcomplete hctx->cpumask through sysfs
*/
mutex_lock(&q->sysfs_lock);
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
queue_for_each_hw_ctx(q, hctx, i) {
cpumask_clear(hctx->cpumask);
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
hctx->nr_ctx = 0;
}
/*
* Map software to hardware queues.
*
* If the cpu isn't present, the cpu is mapped to first hctx.
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
*/
for_each_possible_cpu(i) {
hctx_idx = q->mq_map[i];
/* unmapped hw queue can be remapped after CPU topo changed */
if (!set->tags[hctx_idx] &&
!__blk_mq_alloc_rq_map(set, hctx_idx)) {
/*
* If tags initialization fail for some hctx,
* that hctx won't be brought online. In this
* case, remap the current ctx to hctx[0] which
* is guaranteed to always have tags allocated
*/
q->mq_map[i] = 0;
}
ctx = per_cpu_ptr(q->queue_ctx, i);
hctx = blk_mq_map_queue(q, i);
cpumask_set_cpu(i, hctx->cpumask);
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
ctx->index_hw = hctx->nr_ctx;
hctx->ctxs[hctx->nr_ctx++] = ctx;
}
mutex_unlock(&q->sysfs_lock);
queue_for_each_hw_ctx(q, hctx, i) {
/*
* If no software queues are mapped to this hardware queue,
* disable it and free the request entries.
*/
if (!hctx->nr_ctx) {
/* Never unmap queue 0. We need it as a
* fallback in case of a new remap fails
* allocation
*/
if (i && set->tags[i])
blk_mq_free_map_and_requests(set, i);
hctx->tags = NULL;
continue;
}
hctx->tags = set->tags[i];
WARN_ON(!hctx->tags);
/*
* Set the map size to the number of mapped software queues.
* This is more accurate and more efficient than looping
* over all possibly mapped software queues.
*/
sbitmap_resize(&hctx->ctx_map, hctx->nr_ctx);
/*
* Initialize batch roundrobin counts
*/
hctx->next_cpu = blk_mq_first_mapped_cpu(hctx);
hctx->next_cpu_batch = BLK_MQ_CPU_WORK_BATCH;
}
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
}
/*
* Caller needs to ensure that we're either frozen/quiesced, or that
* the queue isn't live yet.
*/
static void queue_set_hctx_shared(struct request_queue *q, bool shared)
{
struct blk_mq_hw_ctx *hctx;
int i;
queue_for_each_hw_ctx(q, hctx, i) {
if (shared) {
if (test_bit(BLK_MQ_S_SCHED_RESTART, &hctx->state))
atomic_inc(&q->shared_hctx_restart);
hctx->flags |= BLK_MQ_F_TAG_SHARED;
} else {
if (test_bit(BLK_MQ_S_SCHED_RESTART, &hctx->state))
atomic_dec(&q->shared_hctx_restart);
hctx->flags &= ~BLK_MQ_F_TAG_SHARED;
}
}
}
static void blk_mq_update_tag_set_depth(struct blk_mq_tag_set *set,
bool shared)
{
struct request_queue *q;
lockdep_assert_held(&set->tag_list_lock);
list_for_each_entry(q, &set->tag_list, tag_set_list) {
blk_mq_freeze_queue(q);
queue_set_hctx_shared(q, shared);
blk_mq_unfreeze_queue(q);
}
}
static void blk_mq_del_queue_tag_set(struct request_queue *q)
{
struct blk_mq_tag_set *set = q->tag_set;
mutex_lock(&set->tag_list_lock);
list_del_rcu(&q->tag_set_list);
INIT_LIST_HEAD(&q->tag_set_list);
if (list_is_singular(&set->tag_list)) {
/* just transitioned to unshared */
set->flags &= ~BLK_MQ_F_TAG_SHARED;
/* update existing queue */
blk_mq_update_tag_set_depth(set, false);
}
mutex_unlock(&set->tag_list_lock);
synchronize_rcu();
}
static void blk_mq_add_queue_tag_set(struct blk_mq_tag_set *set,
struct request_queue *q)
{
q->tag_set = set;
mutex_lock(&set->tag_list_lock);
/*
* Check to see if we're transitioning to shared (from 1 to 2 queues).
*/
if (!list_empty(&set->tag_list) &&
!(set->flags & BLK_MQ_F_TAG_SHARED)) {
set->flags |= BLK_MQ_F_TAG_SHARED;
/* update existing queue */
blk_mq_update_tag_set_depth(set, true);
}
if (set->flags & BLK_MQ_F_TAG_SHARED)
queue_set_hctx_shared(q, true);
list_add_tail_rcu(&q->tag_set_list, &set->tag_list);
mutex_unlock(&set->tag_list_lock);
}
/*
* It is the actual release handler for mq, but we do it from
* request queue's release handler for avoiding use-after-free
* and headache because q->mq_kobj shouldn't have been introduced,
* but we can't group ctx/kctx kobj without it.
*/
void blk_mq_release(struct request_queue *q)
{
struct blk_mq_hw_ctx *hctx;
unsigned int i;
/* hctx kobj stays in hctx */
queue_for_each_hw_ctx(q, hctx, i) {
if (!hctx)
continue;
kobject_put(&hctx->kobj);
}
q->mq_map = NULL;
kfree(q->queue_hw_ctx);
/*
* release .mq_kobj and sw queue's kobject now because
* both share lifetime with request queue.
*/
blk_mq_sysfs_deinit(q);
free_percpu(q->queue_ctx);
}
struct request_queue *blk_mq_init_queue(struct blk_mq_tag_set *set)
{
struct request_queue *uninit_q, *q;
uninit_q = blk_alloc_queue_node(GFP_KERNEL, set->numa_node, NULL);
if (!uninit_q)
return ERR_PTR(-ENOMEM);
q = blk_mq_init_allocated_queue(set, uninit_q);
if (IS_ERR(q))
blk_cleanup_queue(uninit_q);
return q;
}
EXPORT_SYMBOL(blk_mq_init_queue);
static int blk_mq_hw_ctx_size(struct blk_mq_tag_set *tag_set)
{
int hw_ctx_size = sizeof(struct blk_mq_hw_ctx);
BUILD_BUG_ON(ALIGN(offsetof(struct blk_mq_hw_ctx, srcu),
__alignof__(struct blk_mq_hw_ctx)) !=
sizeof(struct blk_mq_hw_ctx));
if (tag_set->flags & BLK_MQ_F_BLOCKING)
hw_ctx_size += sizeof(struct srcu_struct);
return hw_ctx_size;
}
static void blk_mq_realloc_hw_ctxs(struct blk_mq_tag_set *set,
struct request_queue *q)
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
{
int i, j;
struct blk_mq_hw_ctx **hctxs = q->queue_hw_ctx;
blk_mq_sysfs_unregister(q);
/* protect against switching io scheduler */
mutex_lock(&q->sysfs_lock);
for (i = 0; i < set->nr_hw_queues; i++) {
int node;
if (hctxs[i])
continue;
node = blk_mq_hw_queue_to_node(q->mq_map, i);
hctxs[i] = kzalloc_node(blk_mq_hw_ctx_size(set),
GFP_KERNEL, node);
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
if (!hctxs[i])
break;
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
if (!zalloc_cpumask_var_node(&hctxs[i]->cpumask, GFP_KERNEL,
node)) {
kfree(hctxs[i]);
hctxs[i] = NULL;
break;
}
atomic_set(&hctxs[i]->nr_active, 0);
hctxs[i]->numa_node = node;
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
hctxs[i]->queue_num = i;
if (blk_mq_init_hctx(q, set, hctxs[i], i)) {
free_cpumask_var(hctxs[i]->cpumask);
kfree(hctxs[i]);
hctxs[i] = NULL;
break;
}
blk_mq_hctx_kobj_init(hctxs[i]);
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
}
for (j = i; j < q->nr_hw_queues; j++) {
struct blk_mq_hw_ctx *hctx = hctxs[j];
if (hctx) {
if (hctx->tags)
blk_mq_free_map_and_requests(set, j);
blk_mq_exit_hctx(q, set, hctx, j);
kobject_put(&hctx->kobj);
hctxs[j] = NULL;
}
}
q->nr_hw_queues = i;
mutex_unlock(&q->sysfs_lock);
blk_mq_sysfs_register(q);
}
struct request_queue *blk_mq_init_allocated_queue(struct blk_mq_tag_set *set,
struct request_queue *q)
{
/* mark the queue as mq asap */
q->mq_ops = set->ops;
blk-stat: convert to callback-based statistics reporting Currently, statistics are gathered in ~0.13s windows, and users grab the statistics whenever they need them. This is not ideal for both in-tree users: 1. Writeback throttling wants its own dynamically sized window of statistics. Since the blk-stats statistics are reset after every window and the wbt windows don't line up with the blk-stats windows, wbt doesn't see every I/O. 2. Polling currently grabs the statistics on every I/O. Again, depending on how the window lines up, we may miss some I/Os. It's also unnecessary overhead to get the statistics on every I/O; the hybrid polling heuristic would be just as happy with the statistics from the previous full window. This reworks the blk-stats infrastructure to be callback-based: users register a callback that they want called at a given time with all of the statistics from the window during which the callback was active. Users can dynamically bucketize the statistics. wbt and polling both currently use read vs. write, but polling can be extended to further subdivide based on request size. The callbacks are kept on an RCU list, and each callback has percpu stats buffers. There will only be a few users, so the overhead on the I/O completion side is low. The stats flushing is also simplified considerably: since the timer function is responsible for clearing the statistics, we don't have to worry about stale statistics. wbt is a trivial conversion. After the conversion, the windowing problem mentioned above is fixed. For polling, we register an extra callback that caches the previous window's statistics in the struct request_queue for the hybrid polling heuristic to use. Since we no longer have a single stats buffer for the request queue, this also removes the sysfs and debugfs stats entries. To replace those, we add a debugfs entry for the poll statistics. Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-03-21 15:56:08 +00:00
q->poll_cb = blk_stat_alloc_callback(blk_mq_poll_stats_fn,
blk_mq_poll_stats_bkt,
BLK_MQ_POLL_STATS_BKTS, q);
blk-stat: convert to callback-based statistics reporting Currently, statistics are gathered in ~0.13s windows, and users grab the statistics whenever they need them. This is not ideal for both in-tree users: 1. Writeback throttling wants its own dynamically sized window of statistics. Since the blk-stats statistics are reset after every window and the wbt windows don't line up with the blk-stats windows, wbt doesn't see every I/O. 2. Polling currently grabs the statistics on every I/O. Again, depending on how the window lines up, we may miss some I/Os. It's also unnecessary overhead to get the statistics on every I/O; the hybrid polling heuristic would be just as happy with the statistics from the previous full window. This reworks the blk-stats infrastructure to be callback-based: users register a callback that they want called at a given time with all of the statistics from the window during which the callback was active. Users can dynamically bucketize the statistics. wbt and polling both currently use read vs. write, but polling can be extended to further subdivide based on request size. The callbacks are kept on an RCU list, and each callback has percpu stats buffers. There will only be a few users, so the overhead on the I/O completion side is low. The stats flushing is also simplified considerably: since the timer function is responsible for clearing the statistics, we don't have to worry about stale statistics. wbt is a trivial conversion. After the conversion, the windowing problem mentioned above is fixed. For polling, we register an extra callback that caches the previous window's statistics in the struct request_queue for the hybrid polling heuristic to use. Since we no longer have a single stats buffer for the request queue, this also removes the sysfs and debugfs stats entries. To replace those, we add a debugfs entry for the poll statistics. Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-03-21 15:56:08 +00:00
if (!q->poll_cb)
goto err_exit;
q->queue_ctx = alloc_percpu(struct blk_mq_ctx);
if (!q->queue_ctx)
goto err_exit;
blk-mq: initialize mq kobjects in blk_mq_init_allocated_queue() Both q->mq_kobj and sw queues' kobjects should have been initialized once, instead of doing that each add_disk context. Also this patch removes clearing of ctx in blk_mq_init_cpu_queues() because percpu allocator fills zero to allocated variable. This patch fixes one issue[1] reported from Omar. [1] kernel wearning when doing unbind/bind on one scsi-mq device [ 19.347924] kobject (ffff8800791ea0b8): tried to init an initialized object, something is seriously wrong. [ 19.349781] CPU: 1 PID: 84 Comm: kworker/u8:1 Not tainted 4.10.0-rc7-00210-g53f39eeaa263 #34 [ 19.350686] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.1-20161122_114906-anatol 04/01/2014 [ 19.350920] Workqueue: events_unbound async_run_entry_fn [ 19.350920] Call Trace: [ 19.350920] dump_stack+0x63/0x83 [ 19.350920] kobject_init+0x77/0x90 [ 19.350920] blk_mq_register_dev+0x40/0x130 [ 19.350920] blk_register_queue+0xb6/0x190 [ 19.350920] device_add_disk+0x1ec/0x4b0 [ 19.350920] sd_probe_async+0x10d/0x1c0 [sd_mod] [ 19.350920] async_run_entry_fn+0x48/0x150 [ 19.350920] process_one_work+0x1d0/0x480 [ 19.350920] worker_thread+0x48/0x4e0 [ 19.350920] kthread+0x101/0x140 [ 19.350920] ? process_one_work+0x480/0x480 [ 19.350920] ? kthread_create_on_node+0x60/0x60 [ 19.350920] ret_from_fork+0x2c/0x40 Cc: Omar Sandoval <osandov@osandov.com> Signed-off-by: Ming Lei <tom.leiming@gmail.com> Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-22 10:13:59 +00:00
/* init q->mq_kobj and sw queues' kobjects */
blk_mq_sysfs_init(q);
q->queue_hw_ctx = kzalloc_node(nr_cpu_ids * sizeof(*(q->queue_hw_ctx)),
GFP_KERNEL, set->numa_node);
if (!q->queue_hw_ctx)
goto err_percpu;
q->mq_map = set->mq_map;
blk_mq_realloc_hw_ctxs(set, q);
if (!q->nr_hw_queues)
goto err_hctxs;
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
INIT_WORK(&q->timeout_work, blk_mq_timeout_work);
blk_queue_rq_timeout(q, set->timeout ? set->timeout : 30 * HZ);
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
q->nr_queues = nr_cpu_ids;
q->queue_flags |= QUEUE_FLAG_MQ_DEFAULT;
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
if (!(set->flags & BLK_MQ_F_SG_MERGE))
queue_flag_set_unlocked(QUEUE_FLAG_NO_SG_MERGE, q);
q->sg_reserved_size = INT_MAX;
INIT_DELAYED_WORK(&q->requeue_work, blk_mq_requeue_work);
INIT_LIST_HEAD(&q->requeue_list);
spin_lock_init(&q->requeue_lock);
blk_queue_make_request(q, blk_mq_make_request);
if (q->mq_ops->poll)
q->poll_fn = blk_mq_poll;
/*
* Do this after blk_queue_make_request() overrides it...
*/
q->nr_requests = set->queue_depth;
/*
* Default to classic polling
*/
q->poll_nsec = -1;
if (set->ops->complete)
blk_queue_softirq_done(q, set->ops->complete);
blk_mq_init_cpu_queues(q, set->nr_hw_queues);
blk_mq_add_queue_tag_set(set, q);
blk_mq_map_swqueue(q);
blk-mq: fix sysfs registration/unregistration race There is a race between cpu hotplug handling and adding/deleting gendisk for blk-mq, where both are trying to register and unregister the same sysfs entries. null_add_dev --> blk_mq_init_queue --> blk_mq_init_allocated_queue --> add to 'all_q_list' (*) --> add_disk --> blk_register_queue --> blk_mq_register_disk (++) null_del_dev --> del_gendisk --> blk_unregister_queue --> blk_mq_unregister_disk (--) --> blk_cleanup_queue --> blk_mq_free_queue --> del from 'all_q_list' (*) blk_mq_queue_reinit --> blk_mq_sysfs_unregister (-) --> blk_mq_sysfs_register (+) While the request queue is added to 'all_q_list' (*), blk_mq_queue_reinit() can be called for the queue anytime by CPU hotplug callback. But blk_mq_sysfs_unregister (-) and blk_mq_sysfs_register (+) in blk_mq_queue_reinit must not be called before blk_mq_register_disk (++) and after blk_mq_unregister_disk (--) is finished. Because '/sys/block/*/mq/' is not exists. There has already been BLK_MQ_F_SYSFS_UP flag in hctx->flags which can be used to track these sysfs stuff, but it is only fixing this issue partially. In order to fix it completely, we just need per-queue flag instead of per-hctx flag with appropriate locking. So this introduces q->mq_sysfs_init_done which is properly protected with all_q_mutex. Also, we need to ensure that blk_mq_map_swqueue() is called with all_q_mutex is held. Since hctx->nr_ctx is reset temporarily and updated in blk_mq_map_swqueue(), so we should avoid blk_mq_register_hctx() seeing the temporary hctx->nr_ctx value in CPU hotplug handling or adding/deleting gendisk . Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Reviewed-by: Ming Lei <tom.leiming@gmail.com> Cc: Ming Lei <tom.leiming@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-09-26 17:09:20 +00:00
if (!(set->flags & BLK_MQ_F_NO_SCHED)) {
int ret;
ret = blk_mq_sched_init(q);
if (ret)
return ERR_PTR(ret);
}
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
return q;
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
err_hctxs:
kfree(q->queue_hw_ctx);
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
err_percpu:
free_percpu(q->queue_ctx);
err_exit:
q->mq_ops = NULL;
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
return ERR_PTR(-ENOMEM);
}
EXPORT_SYMBOL(blk_mq_init_allocated_queue);
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
void blk_mq_free_queue(struct request_queue *q)
{
struct blk_mq_tag_set *set = q->tag_set;
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
blk_mq_del_queue_tag_set(q);
blk_mq_exit_hw_queues(q, set, set->nr_hw_queues);
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
}
/* Basically redo blk_mq_init_queue with queue frozen */
static void blk_mq_queue_reinit(struct request_queue *q)
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
{
WARN_ON_ONCE(!atomic_read(&q->mq_freeze_depth));
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
blk_mq_debugfs_unregister_hctxs(q);
blk_mq_sysfs_unregister(q);
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
/*
* redo blk_mq_init_cpu_queues and blk_mq_init_hw_queues. FIXME: maybe
* we should change hctx numa_node according to the new topology (this
* involves freeing and re-allocating memory, worth doing?)
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
*/
blk_mq_map_swqueue(q);
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
blk_mq_sysfs_register(q);
blk_mq_debugfs_register_hctxs(q);
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
}
static int __blk_mq_alloc_rq_maps(struct blk_mq_tag_set *set)
{
int i;
for (i = 0; i < set->nr_hw_queues; i++)
if (!__blk_mq_alloc_rq_map(set, i))
goto out_unwind;
return 0;
out_unwind:
while (--i >= 0)
blk_mq_free_rq_map(set->tags[i]);
return -ENOMEM;
}
/*
* Allocate the request maps associated with this tag_set. Note that this
* may reduce the depth asked for, if memory is tight. set->queue_depth
* will be updated to reflect the allocated depth.
*/
static int blk_mq_alloc_rq_maps(struct blk_mq_tag_set *set)
{
unsigned int depth;
int err;
depth = set->queue_depth;
do {
err = __blk_mq_alloc_rq_maps(set);
if (!err)
break;
set->queue_depth >>= 1;
if (set->queue_depth < set->reserved_tags + BLK_MQ_TAG_MIN) {
err = -ENOMEM;
break;
}
} while (set->queue_depth);
if (!set->queue_depth || err) {
pr_err("blk-mq: failed to allocate request map\n");
return -ENOMEM;
}
if (depth != set->queue_depth)
pr_info("blk-mq: reduced tag depth (%u -> %u)\n",
depth, set->queue_depth);
return 0;
}
static int blk_mq_update_queue_map(struct blk_mq_tag_set *set)
{
blk-mq: avoid to map CPU into stale hw queue blk_mq_pci_map_queues() may not map one CPU into any hw queue, but its previous map isn't cleared yet, and may point to one stale hw queue index. This patch fixes the following issue by clearing the mapping table before setting it up in blk_mq_pci_map_queues(). This patches fixes this following issue reported by Zhang Yi: [ 101.202734] BUG: unable to handle kernel NULL pointer dereference at 0000000094d3013f [ 101.211487] IP: blk_mq_map_swqueue+0xbc/0x200 [ 101.216346] PGD 0 P4D 0 [ 101.219171] Oops: 0000 [#1] SMP [ 101.222674] Modules linked in: sunrpc ipmi_ssif vfat fat intel_rapl sb_edac x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel intel_cstate intel_uncore mxm_wmi intel_rapl_perf iTCO_wdt ipmi_si ipmi_devintf pcspkr iTCO_vendor_support sg dcdbas ipmi_msghandler wmi mei_me lpc_ich shpchp mei acpi_power_meter dm_multipath ip_tables xfs libcrc32c sd_mod mgag200 i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm ahci libahci crc32c_intel libata tg3 nvme nvme_core megaraid_sas ptp i2c_core pps_core dm_mirror dm_region_hash dm_log dm_mod [ 101.284881] CPU: 0 PID: 504 Comm: kworker/u25:5 Not tainted 4.15.0-rc2 #1 [ 101.292455] Hardware name: Dell Inc. PowerEdge R730xd/072T6D, BIOS 2.5.5 08/16/2017 [ 101.301001] Workqueue: nvme-wq nvme_reset_work [nvme] [ 101.306636] task: 00000000f2c53190 task.stack: 000000002da874f9 [ 101.313241] RIP: 0010:blk_mq_map_swqueue+0xbc/0x200 [ 101.318681] RSP: 0018:ffffc9000234fd70 EFLAGS: 00010282 [ 101.324511] RAX: ffff88047ffc9480 RBX: ffff88047e130850 RCX: 0000000000000000 [ 101.332471] RDX: ffffe8ffffd40580 RSI: ffff88047e509b40 RDI: ffff88046f37a008 [ 101.340432] RBP: 000000000000000b R08: ffff88046f37a008 R09: 0000000011f94280 [ 101.348392] R10: ffff88047ffd4d00 R11: 0000000000000000 R12: ffff88046f37a008 [ 101.356353] R13: ffff88047e130f38 R14: 000000000000000b R15: ffff88046f37a558 [ 101.364314] FS: 0000000000000000(0000) GS:ffff880277c00000(0000) knlGS:0000000000000000 [ 101.373342] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 101.379753] CR2: 0000000000000098 CR3: 000000047f409004 CR4: 00000000001606f0 [ 101.387714] Call Trace: [ 101.390445] blk_mq_update_nr_hw_queues+0xbf/0x130 [ 101.395791] nvme_reset_work+0x6f4/0xc06 [nvme] [ 101.400848] ? pick_next_task_fair+0x290/0x5f0 [ 101.405807] ? __switch_to+0x1f5/0x430 [ 101.409988] ? put_prev_entity+0x2f/0xd0 [ 101.414365] process_one_work+0x141/0x340 [ 101.418836] worker_thread+0x47/0x3e0 [ 101.422921] kthread+0xf5/0x130 [ 101.426424] ? rescuer_thread+0x380/0x380 [ 101.430896] ? kthread_associate_blkcg+0x90/0x90 [ 101.436048] ret_from_fork+0x1f/0x30 [ 101.440034] Code: 48 83 3c ca 00 0f 84 2b 01 00 00 48 63 cd 48 8b 93 10 01 00 00 8b 0c 88 48 8b 83 20 01 00 00 4a 03 14 f5 60 04 af 81 48 8b 0c c8 <48> 8b 81 98 00 00 00 f0 4c 0f ab 30 8b 81 f8 00 00 00 89 42 44 [ 101.461116] RIP: blk_mq_map_swqueue+0xbc/0x200 RSP: ffffc9000234fd70 [ 101.468205] CR2: 0000000000000098 [ 101.471907] ---[ end trace 5fe710f98228a3ca ]--- [ 101.482489] Kernel panic - not syncing: Fatal exception [ 101.488505] Kernel Offset: disabled [ 101.497752] ---[ end Kernel panic - not syncing: Fatal exception Reviewed-by: Christoph Hellwig <hch@lst.de> Suggested-by: Christoph Hellwig <hch@lst.de> Reported-by: Yi Zhang <yi.zhang@redhat.com> Tested-by: Yi Zhang <yi.zhang@redhat.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-06 08:27:39 +00:00
if (set->ops->map_queues) {
int cpu;
/*
* transport .map_queues is usually done in the following
* way:
*
* for (queue = 0; queue < set->nr_hw_queues; queue++) {
* mask = get_cpu_mask(queue)
* for_each_cpu(cpu, mask)
* set->mq_map[cpu] = queue;
* }
*
* When we need to remap, the table has to be cleared for
* killing stale mapping since one CPU may not be mapped
* to any hw queue.
*/
for_each_possible_cpu(cpu)
set->mq_map[cpu] = 0;
return set->ops->map_queues(set);
blk-mq: avoid to map CPU into stale hw queue blk_mq_pci_map_queues() may not map one CPU into any hw queue, but its previous map isn't cleared yet, and may point to one stale hw queue index. This patch fixes the following issue by clearing the mapping table before setting it up in blk_mq_pci_map_queues(). This patches fixes this following issue reported by Zhang Yi: [ 101.202734] BUG: unable to handle kernel NULL pointer dereference at 0000000094d3013f [ 101.211487] IP: blk_mq_map_swqueue+0xbc/0x200 [ 101.216346] PGD 0 P4D 0 [ 101.219171] Oops: 0000 [#1] SMP [ 101.222674] Modules linked in: sunrpc ipmi_ssif vfat fat intel_rapl sb_edac x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel intel_cstate intel_uncore mxm_wmi intel_rapl_perf iTCO_wdt ipmi_si ipmi_devintf pcspkr iTCO_vendor_support sg dcdbas ipmi_msghandler wmi mei_me lpc_ich shpchp mei acpi_power_meter dm_multipath ip_tables xfs libcrc32c sd_mod mgag200 i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm ahci libahci crc32c_intel libata tg3 nvme nvme_core megaraid_sas ptp i2c_core pps_core dm_mirror dm_region_hash dm_log dm_mod [ 101.284881] CPU: 0 PID: 504 Comm: kworker/u25:5 Not tainted 4.15.0-rc2 #1 [ 101.292455] Hardware name: Dell Inc. PowerEdge R730xd/072T6D, BIOS 2.5.5 08/16/2017 [ 101.301001] Workqueue: nvme-wq nvme_reset_work [nvme] [ 101.306636] task: 00000000f2c53190 task.stack: 000000002da874f9 [ 101.313241] RIP: 0010:blk_mq_map_swqueue+0xbc/0x200 [ 101.318681] RSP: 0018:ffffc9000234fd70 EFLAGS: 00010282 [ 101.324511] RAX: ffff88047ffc9480 RBX: ffff88047e130850 RCX: 0000000000000000 [ 101.332471] RDX: ffffe8ffffd40580 RSI: ffff88047e509b40 RDI: ffff88046f37a008 [ 101.340432] RBP: 000000000000000b R08: ffff88046f37a008 R09: 0000000011f94280 [ 101.348392] R10: ffff88047ffd4d00 R11: 0000000000000000 R12: ffff88046f37a008 [ 101.356353] R13: ffff88047e130f38 R14: 000000000000000b R15: ffff88046f37a558 [ 101.364314] FS: 0000000000000000(0000) GS:ffff880277c00000(0000) knlGS:0000000000000000 [ 101.373342] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 101.379753] CR2: 0000000000000098 CR3: 000000047f409004 CR4: 00000000001606f0 [ 101.387714] Call Trace: [ 101.390445] blk_mq_update_nr_hw_queues+0xbf/0x130 [ 101.395791] nvme_reset_work+0x6f4/0xc06 [nvme] [ 101.400848] ? pick_next_task_fair+0x290/0x5f0 [ 101.405807] ? __switch_to+0x1f5/0x430 [ 101.409988] ? put_prev_entity+0x2f/0xd0 [ 101.414365] process_one_work+0x141/0x340 [ 101.418836] worker_thread+0x47/0x3e0 [ 101.422921] kthread+0xf5/0x130 [ 101.426424] ? rescuer_thread+0x380/0x380 [ 101.430896] ? kthread_associate_blkcg+0x90/0x90 [ 101.436048] ret_from_fork+0x1f/0x30 [ 101.440034] Code: 48 83 3c ca 00 0f 84 2b 01 00 00 48 63 cd 48 8b 93 10 01 00 00 8b 0c 88 48 8b 83 20 01 00 00 4a 03 14 f5 60 04 af 81 48 8b 0c c8 <48> 8b 81 98 00 00 00 f0 4c 0f ab 30 8b 81 f8 00 00 00 89 42 44 [ 101.461116] RIP: blk_mq_map_swqueue+0xbc/0x200 RSP: ffffc9000234fd70 [ 101.468205] CR2: 0000000000000098 [ 101.471907] ---[ end trace 5fe710f98228a3ca ]--- [ 101.482489] Kernel panic - not syncing: Fatal exception [ 101.488505] Kernel Offset: disabled [ 101.497752] ---[ end Kernel panic - not syncing: Fatal exception Reviewed-by: Christoph Hellwig <hch@lst.de> Suggested-by: Christoph Hellwig <hch@lst.de> Reported-by: Yi Zhang <yi.zhang@redhat.com> Tested-by: Yi Zhang <yi.zhang@redhat.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-06 08:27:39 +00:00
} else
return blk_mq_map_queues(set);
}
/*
* Alloc a tag set to be associated with one or more request queues.
* May fail with EINVAL for various error conditions. May adjust the
* requested depth down, if if it too large. In that case, the set
* value will be stored in set->queue_depth.
*/
int blk_mq_alloc_tag_set(struct blk_mq_tag_set *set)
{
int ret;
BUILD_BUG_ON(BLK_MQ_MAX_DEPTH > 1 << BLK_MQ_UNIQUE_TAG_BITS);
if (!set->nr_hw_queues)
return -EINVAL;
if (!set->queue_depth)
return -EINVAL;
if (set->queue_depth < set->reserved_tags + BLK_MQ_TAG_MIN)
return -EINVAL;
if (!set->ops->queue_rq)
return -EINVAL;
if (!set->ops->get_budget ^ !set->ops->put_budget)
return -EINVAL;
if (set->queue_depth > BLK_MQ_MAX_DEPTH) {
pr_info("blk-mq: reduced tag depth to %u\n",
BLK_MQ_MAX_DEPTH);
set->queue_depth = BLK_MQ_MAX_DEPTH;
}
/*
* If a crashdump is active, then we are potentially in a very
* memory constrained environment. Limit us to 1 queue and
* 64 tags to prevent using too much memory.
*/
if (is_kdump_kernel()) {
set->nr_hw_queues = 1;
set->queue_depth = min(64U, set->queue_depth);
}
/*
* There is no use for more h/w queues than cpus.
*/
if (set->nr_hw_queues > nr_cpu_ids)
set->nr_hw_queues = nr_cpu_ids;
set->tags = kzalloc_node(nr_cpu_ids * sizeof(struct blk_mq_tags *),
GFP_KERNEL, set->numa_node);
if (!set->tags)
return -ENOMEM;
ret = -ENOMEM;
set->mq_map = kzalloc_node(sizeof(*set->mq_map) * nr_cpu_ids,
GFP_KERNEL, set->numa_node);
if (!set->mq_map)
goto out_free_tags;
ret = blk_mq_update_queue_map(set);
if (ret)
goto out_free_mq_map;
ret = blk_mq_alloc_rq_maps(set);
if (ret)
goto out_free_mq_map;
mutex_init(&set->tag_list_lock);
INIT_LIST_HEAD(&set->tag_list);
return 0;
out_free_mq_map:
kfree(set->mq_map);
set->mq_map = NULL;
out_free_tags:
kfree(set->tags);
set->tags = NULL;
return ret;
}
EXPORT_SYMBOL(blk_mq_alloc_tag_set);
void blk_mq_free_tag_set(struct blk_mq_tag_set *set)
{
int i;
for (i = 0; i < nr_cpu_ids; i++)
blk_mq_free_map_and_requests(set, i);
kfree(set->mq_map);
set->mq_map = NULL;
kfree(set->tags);
set->tags = NULL;
}
EXPORT_SYMBOL(blk_mq_free_tag_set);
int blk_mq_update_nr_requests(struct request_queue *q, unsigned int nr)
{
struct blk_mq_tag_set *set = q->tag_set;
struct blk_mq_hw_ctx *hctx;
int i, ret;
if (!set)
return -EINVAL;
blk_mq_freeze_queue(q);
blk_mq_quiesce_queue(q);
ret = 0;
queue_for_each_hw_ctx(q, hctx, i) {
if (!hctx->tags)
continue;
/*
* If we're using an MQ scheduler, just update the scheduler
* queue depth. This is similar to what the old code would do.
*/
if (!hctx->sched_tags) {
ret = blk_mq_tag_update_depth(hctx, &hctx->tags, nr,
false);
} else {
ret = blk_mq_tag_update_depth(hctx, &hctx->sched_tags,
nr, true);
}
if (ret)
break;
}
if (!ret)
q->nr_requests = nr;
blk_mq_unquiesce_queue(q);
blk_mq_unfreeze_queue(q);
return ret;
}
static void __blk_mq_update_nr_hw_queues(struct blk_mq_tag_set *set,
int nr_hw_queues)
{
struct request_queue *q;
lockdep_assert_held(&set->tag_list_lock);
if (nr_hw_queues > nr_cpu_ids)
nr_hw_queues = nr_cpu_ids;
if (nr_hw_queues < 1 || nr_hw_queues == set->nr_hw_queues)
return;
list_for_each_entry(q, &set->tag_list, tag_set_list)
blk_mq_freeze_queue(q);
set->nr_hw_queues = nr_hw_queues;
blk_mq_update_queue_map(set);
list_for_each_entry(q, &set->tag_list, tag_set_list) {
blk_mq_realloc_hw_ctxs(set, q);
blk_mq_queue_reinit(q);
}
list_for_each_entry(q, &set->tag_list, tag_set_list)
blk_mq_unfreeze_queue(q);
}
void blk_mq_update_nr_hw_queues(struct blk_mq_tag_set *set, int nr_hw_queues)
{
mutex_lock(&set->tag_list_lock);
__blk_mq_update_nr_hw_queues(set, nr_hw_queues);
mutex_unlock(&set->tag_list_lock);
}
EXPORT_SYMBOL_GPL(blk_mq_update_nr_hw_queues);
blk-stat: convert to callback-based statistics reporting Currently, statistics are gathered in ~0.13s windows, and users grab the statistics whenever they need them. This is not ideal for both in-tree users: 1. Writeback throttling wants its own dynamically sized window of statistics. Since the blk-stats statistics are reset after every window and the wbt windows don't line up with the blk-stats windows, wbt doesn't see every I/O. 2. Polling currently grabs the statistics on every I/O. Again, depending on how the window lines up, we may miss some I/Os. It's also unnecessary overhead to get the statistics on every I/O; the hybrid polling heuristic would be just as happy with the statistics from the previous full window. This reworks the blk-stats infrastructure to be callback-based: users register a callback that they want called at a given time with all of the statistics from the window during which the callback was active. Users can dynamically bucketize the statistics. wbt and polling both currently use read vs. write, but polling can be extended to further subdivide based on request size. The callbacks are kept on an RCU list, and each callback has percpu stats buffers. There will only be a few users, so the overhead on the I/O completion side is low. The stats flushing is also simplified considerably: since the timer function is responsible for clearing the statistics, we don't have to worry about stale statistics. wbt is a trivial conversion. After the conversion, the windowing problem mentioned above is fixed. For polling, we register an extra callback that caches the previous window's statistics in the struct request_queue for the hybrid polling heuristic to use. Since we no longer have a single stats buffer for the request queue, this also removes the sysfs and debugfs stats entries. To replace those, we add a debugfs entry for the poll statistics. Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-03-21 15:56:08 +00:00
/* Enable polling stats and return whether they were already enabled. */
static bool blk_poll_stats_enable(struct request_queue *q)
{
if (test_bit(QUEUE_FLAG_POLL_STATS, &q->queue_flags) ||
blk_queue_flag_test_and_set(QUEUE_FLAG_POLL_STATS, q))
blk-stat: convert to callback-based statistics reporting Currently, statistics are gathered in ~0.13s windows, and users grab the statistics whenever they need them. This is not ideal for both in-tree users: 1. Writeback throttling wants its own dynamically sized window of statistics. Since the blk-stats statistics are reset after every window and the wbt windows don't line up with the blk-stats windows, wbt doesn't see every I/O. 2. Polling currently grabs the statistics on every I/O. Again, depending on how the window lines up, we may miss some I/Os. It's also unnecessary overhead to get the statistics on every I/O; the hybrid polling heuristic would be just as happy with the statistics from the previous full window. This reworks the blk-stats infrastructure to be callback-based: users register a callback that they want called at a given time with all of the statistics from the window during which the callback was active. Users can dynamically bucketize the statistics. wbt and polling both currently use read vs. write, but polling can be extended to further subdivide based on request size. The callbacks are kept on an RCU list, and each callback has percpu stats buffers. There will only be a few users, so the overhead on the I/O completion side is low. The stats flushing is also simplified considerably: since the timer function is responsible for clearing the statistics, we don't have to worry about stale statistics. wbt is a trivial conversion. After the conversion, the windowing problem mentioned above is fixed. For polling, we register an extra callback that caches the previous window's statistics in the struct request_queue for the hybrid polling heuristic to use. Since we no longer have a single stats buffer for the request queue, this also removes the sysfs and debugfs stats entries. To replace those, we add a debugfs entry for the poll statistics. Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-03-21 15:56:08 +00:00
return true;
blk_stat_add_callback(q, q->poll_cb);
return false;
}
static void blk_mq_poll_stats_start(struct request_queue *q)
{
/*
* We don't arm the callback if polling stats are not enabled or the
* callback is already active.
*/
if (!test_bit(QUEUE_FLAG_POLL_STATS, &q->queue_flags) ||
blk_stat_is_active(q->poll_cb))
return;
blk_stat_activate_msecs(q->poll_cb, 100);
}
static void blk_mq_poll_stats_fn(struct blk_stat_callback *cb)
{
struct request_queue *q = cb->data;
int bucket;
blk-stat: convert to callback-based statistics reporting Currently, statistics are gathered in ~0.13s windows, and users grab the statistics whenever they need them. This is not ideal for both in-tree users: 1. Writeback throttling wants its own dynamically sized window of statistics. Since the blk-stats statistics are reset after every window and the wbt windows don't line up with the blk-stats windows, wbt doesn't see every I/O. 2. Polling currently grabs the statistics on every I/O. Again, depending on how the window lines up, we may miss some I/Os. It's also unnecessary overhead to get the statistics on every I/O; the hybrid polling heuristic would be just as happy with the statistics from the previous full window. This reworks the blk-stats infrastructure to be callback-based: users register a callback that they want called at a given time with all of the statistics from the window during which the callback was active. Users can dynamically bucketize the statistics. wbt and polling both currently use read vs. write, but polling can be extended to further subdivide based on request size. The callbacks are kept on an RCU list, and each callback has percpu stats buffers. There will only be a few users, so the overhead on the I/O completion side is low. The stats flushing is also simplified considerably: since the timer function is responsible for clearing the statistics, we don't have to worry about stale statistics. wbt is a trivial conversion. After the conversion, the windowing problem mentioned above is fixed. For polling, we register an extra callback that caches the previous window's statistics in the struct request_queue for the hybrid polling heuristic to use. Since we no longer have a single stats buffer for the request queue, this also removes the sysfs and debugfs stats entries. To replace those, we add a debugfs entry for the poll statistics. Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-03-21 15:56:08 +00:00
for (bucket = 0; bucket < BLK_MQ_POLL_STATS_BKTS; bucket++) {
if (cb->stat[bucket].nr_samples)
q->poll_stat[bucket] = cb->stat[bucket];
}
blk-stat: convert to callback-based statistics reporting Currently, statistics are gathered in ~0.13s windows, and users grab the statistics whenever they need them. This is not ideal for both in-tree users: 1. Writeback throttling wants its own dynamically sized window of statistics. Since the blk-stats statistics are reset after every window and the wbt windows don't line up with the blk-stats windows, wbt doesn't see every I/O. 2. Polling currently grabs the statistics on every I/O. Again, depending on how the window lines up, we may miss some I/Os. It's also unnecessary overhead to get the statistics on every I/O; the hybrid polling heuristic would be just as happy with the statistics from the previous full window. This reworks the blk-stats infrastructure to be callback-based: users register a callback that they want called at a given time with all of the statistics from the window during which the callback was active. Users can dynamically bucketize the statistics. wbt and polling both currently use read vs. write, but polling can be extended to further subdivide based on request size. The callbacks are kept on an RCU list, and each callback has percpu stats buffers. There will only be a few users, so the overhead on the I/O completion side is low. The stats flushing is also simplified considerably: since the timer function is responsible for clearing the statistics, we don't have to worry about stale statistics. wbt is a trivial conversion. After the conversion, the windowing problem mentioned above is fixed. For polling, we register an extra callback that caches the previous window's statistics in the struct request_queue for the hybrid polling heuristic to use. Since we no longer have a single stats buffer for the request queue, this also removes the sysfs and debugfs stats entries. To replace those, we add a debugfs entry for the poll statistics. Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-03-21 15:56:08 +00:00
}
static unsigned long blk_mq_poll_nsecs(struct request_queue *q,
struct blk_mq_hw_ctx *hctx,
struct request *rq)
{
unsigned long ret = 0;
int bucket;
/*
* If stats collection isn't on, don't sleep but turn it on for
* future users
*/
blk-stat: convert to callback-based statistics reporting Currently, statistics are gathered in ~0.13s windows, and users grab the statistics whenever they need them. This is not ideal for both in-tree users: 1. Writeback throttling wants its own dynamically sized window of statistics. Since the blk-stats statistics are reset after every window and the wbt windows don't line up with the blk-stats windows, wbt doesn't see every I/O. 2. Polling currently grabs the statistics on every I/O. Again, depending on how the window lines up, we may miss some I/Os. It's also unnecessary overhead to get the statistics on every I/O; the hybrid polling heuristic would be just as happy with the statistics from the previous full window. This reworks the blk-stats infrastructure to be callback-based: users register a callback that they want called at a given time with all of the statistics from the window during which the callback was active. Users can dynamically bucketize the statistics. wbt and polling both currently use read vs. write, but polling can be extended to further subdivide based on request size. The callbacks are kept on an RCU list, and each callback has percpu stats buffers. There will only be a few users, so the overhead on the I/O completion side is low. The stats flushing is also simplified considerably: since the timer function is responsible for clearing the statistics, we don't have to worry about stale statistics. wbt is a trivial conversion. After the conversion, the windowing problem mentioned above is fixed. For polling, we register an extra callback that caches the previous window's statistics in the struct request_queue for the hybrid polling heuristic to use. Since we no longer have a single stats buffer for the request queue, this also removes the sysfs and debugfs stats entries. To replace those, we add a debugfs entry for the poll statistics. Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-03-21 15:56:08 +00:00
if (!blk_poll_stats_enable(q))
return 0;
/*
* As an optimistic guess, use half of the mean service time
* for this type of request. We can (and should) make this smarter.
* For instance, if the completion latencies are tight, we can
* get closer than just half the mean. This is especially
* important on devices where the completion latencies are longer
* than ~10 usec. We do use the stats for the relevant IO size
* if available which does lead to better estimates.
*/
bucket = blk_mq_poll_stats_bkt(rq);
if (bucket < 0)
return ret;
if (q->poll_stat[bucket].nr_samples)
ret = (q->poll_stat[bucket].mean + 1) / 2;
return ret;
}
static bool blk_mq_poll_hybrid_sleep(struct request_queue *q,
struct blk_mq_hw_ctx *hctx,
struct request *rq)
{
struct hrtimer_sleeper hs;
enum hrtimer_mode mode;
unsigned int nsecs;
ktime_t kt;
if (rq->rq_flags & RQF_MQ_POLL_SLEPT)
return false;
/*
* poll_nsec can be:
*
* -1: don't ever hybrid sleep
* 0: use half of prev avg
* >0: use this specific value
*/
if (q->poll_nsec == -1)
return false;
else if (q->poll_nsec > 0)
nsecs = q->poll_nsec;
else
nsecs = blk_mq_poll_nsecs(q, hctx, rq);
if (!nsecs)
return false;
rq->rq_flags |= RQF_MQ_POLL_SLEPT;
/*
* This will be replaced with the stats tracking code, using
* 'avg_completion_time / 2' as the pre-sleep target.
*/
kt = nsecs;
mode = HRTIMER_MODE_REL;
hrtimer_init_on_stack(&hs.timer, CLOCK_MONOTONIC, mode);
hrtimer_set_expires(&hs.timer, kt);
hrtimer_init_sleeper(&hs, current);
do {
if (blk_mq_rq_state(rq) == MQ_RQ_COMPLETE)
break;
set_current_state(TASK_UNINTERRUPTIBLE);
hrtimer_start_expires(&hs.timer, mode);
if (hs.task)
io_schedule();
hrtimer_cancel(&hs.timer);
mode = HRTIMER_MODE_ABS;
} while (hs.task && !signal_pending(current));
__set_current_state(TASK_RUNNING);
destroy_hrtimer_on_stack(&hs.timer);
return true;
}
static bool __blk_mq_poll(struct blk_mq_hw_ctx *hctx, struct request *rq)
{
struct request_queue *q = hctx->queue;
long state;
/*
* If we sleep, have the caller restart the poll loop to reset
* the state. Like for the other success return cases, the
* caller is responsible for checking if the IO completed. If
* the IO isn't complete, we'll get called again and will go
* straight to the busy poll loop.
*/
if (blk_mq_poll_hybrid_sleep(q, hctx, rq))
return true;
hctx->poll_considered++;
state = current->state;
while (!need_resched()) {
int ret;
hctx->poll_invoked++;
ret = q->mq_ops->poll(hctx, rq->tag);
if (ret > 0) {
hctx->poll_success++;
set_current_state(TASK_RUNNING);
return true;
}
if (signal_pending_state(state, current))
set_current_state(TASK_RUNNING);
if (current->state == TASK_RUNNING)
return true;
if (ret < 0)
break;
cpu_relax();
}
__set_current_state(TASK_RUNNING);
return false;
}
static bool blk_mq_poll(struct request_queue *q, blk_qc_t cookie)
{
struct blk_mq_hw_ctx *hctx;
struct request *rq;
if (!test_bit(QUEUE_FLAG_POLL, &q->queue_flags))
return false;
hctx = q->queue_hw_ctx[blk_qc_t_to_queue_num(cookie)];
if (!blk_qc_t_is_internal(cookie))
rq = blk_mq_tag_to_rq(hctx->tags, blk_qc_t_to_tag(cookie));
else {
rq = blk_mq_tag_to_rq(hctx->sched_tags, blk_qc_t_to_tag(cookie));
/*
* With scheduling, if the request has completed, we'll
* get a NULL return here, as we clear the sched tag when
* that happens. The request still remains valid, like always,
* so we should be safe with just the NULL check.
*/
if (!rq)
return false;
}
return __blk_mq_poll(hctx, rq);
}
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
static int __init blk_mq_init(void)
{
cpuhp_setup_state_multi(CPUHP_BLK_MQ_DEAD, "block/mq:dead", NULL,
blk_mq_hctx_notify_dead);
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
return 0;
}
subsys_initcall(blk_mq_init);