linux/fs/ext4/super.c

7446 lines
206 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0
/*
* linux/fs/ext4/super.c
*
* Copyright (C) 1992, 1993, 1994, 1995
* Remy Card (card@masi.ibp.fr)
* Laboratoire MASI - Institut Blaise Pascal
* Universite Pierre et Marie Curie (Paris VI)
*
* from
*
* linux/fs/minix/inode.c
*
* Copyright (C) 1991, 1992 Linus Torvalds
*
* Big-endian to little-endian byte-swapping/bitmaps by
* David S. Miller (davem@caip.rutgers.edu), 1995
*/
#include <linux/module.h>
#include <linux/string.h>
#include <linux/fs.h>
#include <linux/time.h>
#include <linux/vmalloc.h>
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/backing-dev.h>
#include <linux/parser.h>
#include <linux/buffer_head.h>
#include <linux/exportfs.h>
#include <linux/vfs.h>
#include <linux/random.h>
#include <linux/mount.h>
#include <linux/namei.h>
#include <linux/quotaops.h>
#include <linux/seq_file.h>
#include <linux/ctype.h>
#include <linux/log2.h>
Ext4: Uninitialized Block Groups In pass1 of e2fsck, every inode table in the fileystem is scanned and checked, regardless of whether it is in use. This is this the most time consuming part of the filesystem check. The unintialized block group feature can greatly reduce e2fsck time by eliminating checking of uninitialized inodes. With this feature, there is a a high water mark of used inodes for each block group. Block and inode bitmaps can be uninitialized on disk via a flag in the group descriptor to avoid reading or scanning them at e2fsck time. A checksum of each group descriptor is used to ensure that corruption in the group descriptor's bit flags does not cause incorrect operation. The feature is enabled through a mkfs option mke2fs /dev/ -O uninit_groups A patch adding support for uninitialized block groups to e2fsprogs tools has been posted to the linux-ext4 mailing list. The patches have been stress tested with fsstress and fsx. In performance tests testing e2fsck time, we have seen that e2fsck time on ext3 grows linearly with the total number of inodes in the filesytem. In ext4 with the uninitialized block groups feature, the e2fsck time is constant, based solely on the number of used inodes rather than the total inode count. Since typical ext4 filesystems only use 1-10% of their inodes, this feature can greatly reduce e2fsck time for users. With performance improvement of 2-20 times, depending on how full the filesystem is. The attached graph shows the major improvements in e2fsck times in filesystems with a large total inode count, but few inodes in use. In each group descriptor if we have EXT4_BG_INODE_UNINIT set in bg_flags: Inode table is not initialized/used in this group. So we can skip the consistency check during fsck. EXT4_BG_BLOCK_UNINIT set in bg_flags: No block in the group is used. So we can skip the block bitmap verification for this group. We also add two new fields to group descriptor as a part of uninitialized group patch. __le16 bg_itable_unused; /* Unused inodes count */ __le16 bg_checksum; /* crc16(sb_uuid+group+desc) */ bg_itable_unused: If we have EXT4_BG_INODE_UNINIT not set in bg_flags then bg_itable_unused will give the offset within the inode table till the inodes are used. This can be used by fsck to skip list of inodes that are marked unused. bg_checksum: Now that we depend on bg_flags and bg_itable_unused to determine the block and inode usage, we need to make sure group descriptor is not corrupt. We add checksum to group descriptor to detect corruption. If the descriptor is found to be corrupt, we mark all the blocks and inodes in the group used. Signed-off-by: Avantika Mathur <mathur@us.ibm.com> Signed-off-by: Andreas Dilger <adilger@clusterfs.com> Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2007-10-16 22:38:25 +00:00
#include <linux/crc16.h>
#include <linux/dax.h>
#include <linux/uaccess.h>
#include <linux/iversion.h>
#include <linux/unicode.h>
#include <linux/part_stat.h>
ext4: add support for lazy inode table initialization When the lazy_itable_init extended option is passed to mke2fs, it considerably speeds up filesystem creation because inode tables are not zeroed out. The fact that parts of the inode table are uninitialized is not a problem so long as the block group descriptors, which contain information regarding how much of the inode table has been initialized, has not been corrupted However, if the block group checksums are not valid, e2fsck must scan the entire inode table, and the the old, uninitialized data could potentially cause e2fsck to report false problems. Hence, it is important for the inode tables to be initialized as soon as possble. This commit adds this feature so that mke2fs can safely use the lazy inode table initialization feature to speed up formatting file systems. This is done via a new new kernel thread called ext4lazyinit, which is created on demand and destroyed, when it is no longer needed. There is only one thread for all ext4 filesystems in the system. When the first filesystem with inititable mount option is mounted, ext4lazyinit thread is created, then the filesystem can register its request in the request list. This thread then walks through the list of requests picking up scheduled requests and invoking ext4_init_inode_table(). Next schedule time for the request is computed by multiplying the time it took to zero out last inode table with wait multiplier, which can be set with the (init_itable=n) mount option (default is 10). We are doing this so we do not take the whole I/O bandwidth. When the thread is no longer necessary (request list is empty) it frees the appropriate structures and exits (and can be created later later by another filesystem). We do not disturb regular inode allocations in any way, it just do not care whether the inode table is, or is not zeroed. But when zeroing, we have to skip used inodes, obviously. Also we should prevent new inode allocations from the group, while zeroing is on the way. For that we take write alloc_sem lock in ext4_init_inode_table() and read alloc_sem in the ext4_claim_inode, so when we are unlucky and allocator hits the group which is currently being zeroed, it just has to wait. This can be suppresed using the mount option no_init_itable. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-28 01:30:05 +00:00
#include <linux/kthread.h>
#include <linux/freezer.h>
#include <linux/fsnotify.h>
#include <linux/fs_context.h>
#include <linux/fs_parser.h>
ext4: add support for lazy inode table initialization When the lazy_itable_init extended option is passed to mke2fs, it considerably speeds up filesystem creation because inode tables are not zeroed out. The fact that parts of the inode table are uninitialized is not a problem so long as the block group descriptors, which contain information regarding how much of the inode table has been initialized, has not been corrupted However, if the block group checksums are not valid, e2fsck must scan the entire inode table, and the the old, uninitialized data could potentially cause e2fsck to report false problems. Hence, it is important for the inode tables to be initialized as soon as possble. This commit adds this feature so that mke2fs can safely use the lazy inode table initialization feature to speed up formatting file systems. This is done via a new new kernel thread called ext4lazyinit, which is created on demand and destroyed, when it is no longer needed. There is only one thread for all ext4 filesystems in the system. When the first filesystem with inititable mount option is mounted, ext4lazyinit thread is created, then the filesystem can register its request in the request list. This thread then walks through the list of requests picking up scheduled requests and invoking ext4_init_inode_table(). Next schedule time for the request is computed by multiplying the time it took to zero out last inode table with wait multiplier, which can be set with the (init_itable=n) mount option (default is 10). We are doing this so we do not take the whole I/O bandwidth. When the thread is no longer necessary (request list is empty) it frees the appropriate structures and exits (and can be created later later by another filesystem). We do not disturb regular inode allocations in any way, it just do not care whether the inode table is, or is not zeroed. But when zeroing, we have to skip used inodes, obviously. Also we should prevent new inode allocations from the group, while zeroing is on the way. For that we take write alloc_sem lock in ext4_init_inode_table() and read alloc_sem in the ext4_claim_inode, so when we are unlucky and allocator hits the group which is currently being zeroed, it just has to wait. This can be suppresed using the mount option no_init_itable. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-28 01:30:05 +00:00
#include "ext4.h"
#include "ext4_extents.h" /* Needed for trace points definition */
#include "ext4_jbd2.h"
#include "xattr.h"
#include "acl.h"
#include "mballoc.h"
#include "fsmap.h"
#define CREATE_TRACE_POINTS
#include <trace/events/ext4.h>
static struct ext4_lazy_init *ext4_li_info;
static DEFINE_MUTEX(ext4_li_mtx);
static struct ratelimit_state ext4_mount_msg_ratelimit;
static int ext4_load_journal(struct super_block *, struct ext4_super_block *,
unsigned long journal_devnum);
static int ext4_show_options(struct seq_file *seq, struct dentry *root);
static void ext4_update_super(struct super_block *sb);
static int ext4_commit_super(struct super_block *sb);
static int ext4_mark_recovery_complete(struct super_block *sb,
struct ext4_super_block *es);
static int ext4_clear_journal_err(struct super_block *sb,
struct ext4_super_block *es);
static int ext4_sync_fs(struct super_block *sb, int wait);
static int ext4_statfs(struct dentry *dentry, struct kstatfs *buf);
filesystem freeze: add error handling of write_super_lockfs/unlockfs Currently, ext3 in mainline Linux doesn't have the freeze feature which suspends write requests. So, we cannot take a backup which keeps the filesystem's consistency with the storage device's features (snapshot and replication) while it is mounted. In many case, a commercial filesystem (e.g. VxFS) has the freeze feature and it would be used to get the consistent backup. If Linux's standard filesystem ext3 has the freeze feature, we can do it without a commercial filesystem. So I have implemented the ioctls of the freeze feature. I think we can take the consistent backup with the following steps. 1. Freeze the filesystem with the freeze ioctl. 2. Separate the replication volume or create the snapshot with the storage device's feature. 3. Unfreeze the filesystem with the unfreeze ioctl. 4. Take the backup from the separated replication volume or the snapshot. This patch: VFS: Changed the type of write_super_lockfs and unlockfs from "void" to "int" so that they can return an error. Rename write_super_lockfs and unlockfs of the super block operation freeze_fs and unfreeze_fs to avoid a confusion. ext3, ext4, xfs, gfs2, jfs: Changed the type of write_super_lockfs and unlockfs from "void" to "int" so that write_super_lockfs returns an error if needed, and unlockfs always returns 0. reiserfs: Changed the type of write_super_lockfs and unlockfs from "void" to "int" so that they always return 0 (success) to keep a current behavior. Signed-off-by: Takashi Sato <t-sato@yk.jp.nec.com> Signed-off-by: Masayuki Hamaguchi <m-hamaguchi@ys.jp.nec.com> Cc: <xfs-masters@oss.sgi.com> Cc: <linux-ext4@vger.kernel.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Dave Kleikamp <shaggy@austin.ibm.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Alasdair G Kergon <agk@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-10 00:40:58 +00:00
static int ext4_unfreeze(struct super_block *sb);
static int ext4_freeze(struct super_block *sb);
static inline int ext2_feature_set_ok(struct super_block *sb);
static inline int ext3_feature_set_ok(struct super_block *sb);
ext4: add support for lazy inode table initialization When the lazy_itable_init extended option is passed to mke2fs, it considerably speeds up filesystem creation because inode tables are not zeroed out. The fact that parts of the inode table are uninitialized is not a problem so long as the block group descriptors, which contain information regarding how much of the inode table has been initialized, has not been corrupted However, if the block group checksums are not valid, e2fsck must scan the entire inode table, and the the old, uninitialized data could potentially cause e2fsck to report false problems. Hence, it is important for the inode tables to be initialized as soon as possble. This commit adds this feature so that mke2fs can safely use the lazy inode table initialization feature to speed up formatting file systems. This is done via a new new kernel thread called ext4lazyinit, which is created on demand and destroyed, when it is no longer needed. There is only one thread for all ext4 filesystems in the system. When the first filesystem with inititable mount option is mounted, ext4lazyinit thread is created, then the filesystem can register its request in the request list. This thread then walks through the list of requests picking up scheduled requests and invoking ext4_init_inode_table(). Next schedule time for the request is computed by multiplying the time it took to zero out last inode table with wait multiplier, which can be set with the (init_itable=n) mount option (default is 10). We are doing this so we do not take the whole I/O bandwidth. When the thread is no longer necessary (request list is empty) it frees the appropriate structures and exits (and can be created later later by another filesystem). We do not disturb regular inode allocations in any way, it just do not care whether the inode table is, or is not zeroed. But when zeroing, we have to skip used inodes, obviously. Also we should prevent new inode allocations from the group, while zeroing is on the way. For that we take write alloc_sem lock in ext4_init_inode_table() and read alloc_sem in the ext4_claim_inode, so when we are unlucky and allocator hits the group which is currently being zeroed, it just has to wait. This can be suppresed using the mount option no_init_itable. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-28 01:30:05 +00:00
static void ext4_destroy_lazyinit_thread(void);
static void ext4_unregister_li_request(struct super_block *sb);
static void ext4_clear_request_list(void);
static struct inode *ext4_get_journal_inode(struct super_block *sb,
unsigned int journal_inum);
static int ext4_validate_options(struct fs_context *fc);
static int ext4_check_opt_consistency(struct fs_context *fc,
struct super_block *sb);
static void ext4_apply_options(struct fs_context *fc, struct super_block *sb);
static int ext4_parse_param(struct fs_context *fc, struct fs_parameter *param);
static int ext4_get_tree(struct fs_context *fc);
static int ext4_reconfigure(struct fs_context *fc);
static void ext4_fc_free(struct fs_context *fc);
static int ext4_init_fs_context(struct fs_context *fc);
static void ext4_kill_sb(struct super_block *sb);
static const struct fs_parameter_spec ext4_param_specs[];
/*
* Lock ordering
*
* page fault path:
* mmap_lock -> sb_start_pagefault -> invalidate_lock (r) -> transaction start
* -> page lock -> i_data_sem (rw)
*
* buffered write path:
* sb_start_write -> i_mutex -> mmap_lock
* sb_start_write -> i_mutex -> transaction start -> page lock ->
* i_data_sem (rw)
*
* truncate:
* sb_start_write -> i_mutex -> invalidate_lock (w) -> i_mmap_rwsem (w) ->
* page lock
* sb_start_write -> i_mutex -> invalidate_lock (w) -> transaction start ->
* i_data_sem (rw)
*
* direct IO:
* sb_start_write -> i_mutex -> mmap_lock
* sb_start_write -> i_mutex -> transaction start -> i_data_sem (rw)
*
* writepages:
* transaction start -> page lock(s) -> i_data_sem (rw)
*/
static const struct fs_context_operations ext4_context_ops = {
.parse_param = ext4_parse_param,
.get_tree = ext4_get_tree,
.reconfigure = ext4_reconfigure,
.free = ext4_fc_free,
};
#if !defined(CONFIG_EXT2_FS) && !defined(CONFIG_EXT2_FS_MODULE) && defined(CONFIG_EXT4_USE_FOR_EXT2)
static struct file_system_type ext2_fs_type = {
.owner = THIS_MODULE,
.name = "ext2",
.init_fs_context = ext4_init_fs_context,
.parameters = ext4_param_specs,
.kill_sb = ext4_kill_sb,
.fs_flags = FS_REQUIRES_DEV,
};
fs: Limit sys_mount to only request filesystem modules. Modify the request_module to prefix the file system type with "fs-" and add aliases to all of the filesystems that can be built as modules to match. A common practice is to build all of the kernel code and leave code that is not commonly needed as modules, with the result that many users are exposed to any bug anywhere in the kernel. Looking for filesystems with a fs- prefix limits the pool of possible modules that can be loaded by mount to just filesystems trivially making things safer with no real cost. Using aliases means user space can control the policy of which filesystem modules are auto-loaded by editing /etc/modprobe.d/*.conf with blacklist and alias directives. Allowing simple, safe, well understood work-arounds to known problematic software. This also addresses a rare but unfortunate problem where the filesystem name is not the same as it's module name and module auto-loading would not work. While writing this patch I saw a handful of such cases. The most significant being autofs that lives in the module autofs4. This is relevant to user namespaces because we can reach the request module in get_fs_type() without having any special permissions, and people get uncomfortable when a user specified string (in this case the filesystem type) goes all of the way to request_module. After having looked at this issue I don't think there is any particular reason to perform any filtering or permission checks beyond making it clear in the module request that we want a filesystem module. The common pattern in the kernel is to call request_module() without regards to the users permissions. In general all a filesystem module does once loaded is call register_filesystem() and go to sleep. Which means there is not much attack surface exposed by loading a filesytem module unless the filesystem is mounted. In a user namespace filesystems are not mounted unless .fs_flags = FS_USERNS_MOUNT, which most filesystems do not set today. Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Acked-by: Kees Cook <keescook@chromium.org> Reported-by: Kees Cook <keescook@google.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2013-03-03 03:39:14 +00:00
MODULE_ALIAS_FS("ext2");
MODULE_ALIAS("ext2");
#define IS_EXT2_SB(sb) ((sb)->s_type == &ext2_fs_type)
#else
#define IS_EXT2_SB(sb) (0)
#endif
static struct file_system_type ext3_fs_type = {
.owner = THIS_MODULE,
.name = "ext3",
.init_fs_context = ext4_init_fs_context,
.parameters = ext4_param_specs,
.kill_sb = ext4_kill_sb,
.fs_flags = FS_REQUIRES_DEV,
};
fs: Limit sys_mount to only request filesystem modules. Modify the request_module to prefix the file system type with "fs-" and add aliases to all of the filesystems that can be built as modules to match. A common practice is to build all of the kernel code and leave code that is not commonly needed as modules, with the result that many users are exposed to any bug anywhere in the kernel. Looking for filesystems with a fs- prefix limits the pool of possible modules that can be loaded by mount to just filesystems trivially making things safer with no real cost. Using aliases means user space can control the policy of which filesystem modules are auto-loaded by editing /etc/modprobe.d/*.conf with blacklist and alias directives. Allowing simple, safe, well understood work-arounds to known problematic software. This also addresses a rare but unfortunate problem where the filesystem name is not the same as it's module name and module auto-loading would not work. While writing this patch I saw a handful of such cases. The most significant being autofs that lives in the module autofs4. This is relevant to user namespaces because we can reach the request module in get_fs_type() without having any special permissions, and people get uncomfortable when a user specified string (in this case the filesystem type) goes all of the way to request_module. After having looked at this issue I don't think there is any particular reason to perform any filtering or permission checks beyond making it clear in the module request that we want a filesystem module. The common pattern in the kernel is to call request_module() without regards to the users permissions. In general all a filesystem module does once loaded is call register_filesystem() and go to sleep. Which means there is not much attack surface exposed by loading a filesytem module unless the filesystem is mounted. In a user namespace filesystems are not mounted unless .fs_flags = FS_USERNS_MOUNT, which most filesystems do not set today. Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Acked-by: Kees Cook <keescook@chromium.org> Reported-by: Kees Cook <keescook@google.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2013-03-03 03:39:14 +00:00
MODULE_ALIAS_FS("ext3");
MODULE_ALIAS("ext3");
#define IS_EXT3_SB(sb) ((sb)->s_type == &ext3_fs_type)
static inline void __ext4_read_bh(struct buffer_head *bh, blk_opf_t op_flags,
bh_end_io_t *end_io)
{
/*
* buffer's verified bit is no longer valid after reading from
* disk again due to write out error, clear it to make sure we
* recheck the buffer contents.
*/
clear_buffer_verified(bh);
bh->b_end_io = end_io ? end_io : end_buffer_read_sync;
get_bh(bh);
submit_bh(REQ_OP_READ | op_flags, bh);
}
void ext4_read_bh_nowait(struct buffer_head *bh, blk_opf_t op_flags,
bh_end_io_t *end_io)
{
BUG_ON(!buffer_locked(bh));
if (ext4_buffer_uptodate(bh)) {
unlock_buffer(bh);
return;
}
__ext4_read_bh(bh, op_flags, end_io);
}
int ext4_read_bh(struct buffer_head *bh, blk_opf_t op_flags, bh_end_io_t *end_io)
{
BUG_ON(!buffer_locked(bh));
if (ext4_buffer_uptodate(bh)) {
unlock_buffer(bh);
return 0;
}
__ext4_read_bh(bh, op_flags, end_io);
wait_on_buffer(bh);
if (buffer_uptodate(bh))
return 0;
return -EIO;
}
int ext4_read_bh_lock(struct buffer_head *bh, blk_opf_t op_flags, bool wait)
{
ext4: ext4_read_bh_lock() should submit IO if the buffer isn't uptodate Recently we notice that ext4 filesystem would occasionally fail to read metadata from disk and report error message, but the disk and block layer looks fine. After analyse, we lockon commit 88dbcbb3a484 ("blkdev: avoid migration stalls for blkdev pages"). It provide a migration method for the bdev, we could move page that has buffers without extra users now, but it lock the buffers on the page, which breaks the fragile metadata read operation on ext4 filesystem, ext4_read_bh_lock() was copied from ll_rw_block(), it depends on the assumption of that locked buffer means it is under IO. So it just trylock the buffer and skip submit IO if it lock failed, after wait_on_buffer() we conclude IO error because the buffer is not uptodate. This issue could be easily reproduced by add some delay just after buffer_migrate_lock_buffers() in __buffer_migrate_folio() and do fsstress on ext4 filesystem. EXT4-fs error (device pmem1): __ext4_find_entry:1658: inode #73193: comm fsstress: reading directory lblock 0 EXT4-fs error (device pmem1): __ext4_find_entry:1658: inode #75334: comm fsstress: reading directory lblock 0 Fix it by removing the trylock logic in ext4_read_bh_lock(), just lock the buffer and submit IO if it's not uptodate, and also leave over readahead helper. Cc: stable@kernel.org Signed-off-by: Zhang Yi <yi.zhang@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20220831074629.3755110-1-yi.zhang@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2022-08-31 07:46:29 +00:00
lock_buffer(bh);
if (!wait) {
ext4_read_bh_nowait(bh, op_flags, NULL);
return 0;
}
ext4: ext4_read_bh_lock() should submit IO if the buffer isn't uptodate Recently we notice that ext4 filesystem would occasionally fail to read metadata from disk and report error message, but the disk and block layer looks fine. After analyse, we lockon commit 88dbcbb3a484 ("blkdev: avoid migration stalls for blkdev pages"). It provide a migration method for the bdev, we could move page that has buffers without extra users now, but it lock the buffers on the page, which breaks the fragile metadata read operation on ext4 filesystem, ext4_read_bh_lock() was copied from ll_rw_block(), it depends on the assumption of that locked buffer means it is under IO. So it just trylock the buffer and skip submit IO if it lock failed, after wait_on_buffer() we conclude IO error because the buffer is not uptodate. This issue could be easily reproduced by add some delay just after buffer_migrate_lock_buffers() in __buffer_migrate_folio() and do fsstress on ext4 filesystem. EXT4-fs error (device pmem1): __ext4_find_entry:1658: inode #73193: comm fsstress: reading directory lblock 0 EXT4-fs error (device pmem1): __ext4_find_entry:1658: inode #75334: comm fsstress: reading directory lblock 0 Fix it by removing the trylock logic in ext4_read_bh_lock(), just lock the buffer and submit IO if it's not uptodate, and also leave over readahead helper. Cc: stable@kernel.org Signed-off-by: Zhang Yi <yi.zhang@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20220831074629.3755110-1-yi.zhang@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2022-08-31 07:46:29 +00:00
return ext4_read_bh(bh, op_flags, NULL);
}
/*
* This works like __bread_gfp() except it uses ERR_PTR for error
* returns. Currently with sb_bread it's impossible to distinguish
* between ENOMEM and EIO situations (since both result in a NULL
* return.
*/
static struct buffer_head *__ext4_sb_bread_gfp(struct super_block *sb,
sector_t block,
blk_opf_t op_flags, gfp_t gfp)
{
struct buffer_head *bh;
int ret;
bh = sb_getblk_gfp(sb, block, gfp);
if (bh == NULL)
return ERR_PTR(-ENOMEM);
if (ext4_buffer_uptodate(bh))
return bh;
ret = ext4_read_bh_lock(bh, REQ_META | op_flags, true);
if (ret) {
put_bh(bh);
return ERR_PTR(ret);
}
return bh;
}
struct buffer_head *ext4_sb_bread(struct super_block *sb, sector_t block,
blk_opf_t op_flags)
{
gfp_t gfp = mapping_gfp_constraint(sb->s_bdev->bd_inode->i_mapping,
~__GFP_FS) | __GFP_MOVABLE;
return __ext4_sb_bread_gfp(sb, block, op_flags, gfp);
}
struct buffer_head *ext4_sb_bread_unmovable(struct super_block *sb,
sector_t block)
{
gfp_t gfp = mapping_gfp_constraint(sb->s_bdev->bd_inode->i_mapping,
~__GFP_FS);
return __ext4_sb_bread_gfp(sb, block, 0, gfp);
}
void ext4_sb_breadahead_unmovable(struct super_block *sb, sector_t block)
{
struct buffer_head *bh = bdev_getblk(sb->s_bdev, block,
sb->s_blocksize, GFP_NOWAIT | __GFP_NOWARN);
if (likely(bh)) {
ext4: ext4_read_bh_lock() should submit IO if the buffer isn't uptodate Recently we notice that ext4 filesystem would occasionally fail to read metadata from disk and report error message, but the disk and block layer looks fine. After analyse, we lockon commit 88dbcbb3a484 ("blkdev: avoid migration stalls for blkdev pages"). It provide a migration method for the bdev, we could move page that has buffers without extra users now, but it lock the buffers on the page, which breaks the fragile metadata read operation on ext4 filesystem, ext4_read_bh_lock() was copied from ll_rw_block(), it depends on the assumption of that locked buffer means it is under IO. So it just trylock the buffer and skip submit IO if it lock failed, after wait_on_buffer() we conclude IO error because the buffer is not uptodate. This issue could be easily reproduced by add some delay just after buffer_migrate_lock_buffers() in __buffer_migrate_folio() and do fsstress on ext4 filesystem. EXT4-fs error (device pmem1): __ext4_find_entry:1658: inode #73193: comm fsstress: reading directory lblock 0 EXT4-fs error (device pmem1): __ext4_find_entry:1658: inode #75334: comm fsstress: reading directory lblock 0 Fix it by removing the trylock logic in ext4_read_bh_lock(), just lock the buffer and submit IO if it's not uptodate, and also leave over readahead helper. Cc: stable@kernel.org Signed-off-by: Zhang Yi <yi.zhang@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20220831074629.3755110-1-yi.zhang@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2022-08-31 07:46:29 +00:00
if (trylock_buffer(bh))
ext4_read_bh_nowait(bh, REQ_RAHEAD, NULL);
brelse(bh);
}
}
static int ext4_verify_csum_type(struct super_block *sb,
struct ext4_super_block *es)
{
if (!ext4_has_feature_metadata_csum(sb))
return 1;
return es->s_checksum_type == EXT4_CRC32C_CHKSUM;
}
__le32 ext4_superblock_csum(struct super_block *sb,
struct ext4_super_block *es)
{
struct ext4_sb_info *sbi = EXT4_SB(sb);
int offset = offsetof(struct ext4_super_block, s_checksum);
__u32 csum;
csum = ext4_chksum(sbi, ~0, (char *)es, offset);
return cpu_to_le32(csum);
}
static int ext4_superblock_csum_verify(struct super_block *sb,
struct ext4_super_block *es)
{
if (!ext4_has_metadata_csum(sb))
return 1;
return es->s_checksum == ext4_superblock_csum(sb, es);
}
void ext4_superblock_csum_set(struct super_block *sb)
{
struct ext4_super_block *es = EXT4_SB(sb)->s_es;
if (!ext4_has_metadata_csum(sb))
return;
es->s_checksum = ext4_superblock_csum(sb, es);
}
ext4_fsblk_t ext4_block_bitmap(struct super_block *sb,
struct ext4_group_desc *bg)
{
return le32_to_cpu(bg->bg_block_bitmap_lo) |
(EXT4_DESC_SIZE(sb) >= EXT4_MIN_DESC_SIZE_64BIT ?
(ext4_fsblk_t)le32_to_cpu(bg->bg_block_bitmap_hi) << 32 : 0);
}
ext4_fsblk_t ext4_inode_bitmap(struct super_block *sb,
struct ext4_group_desc *bg)
{
return le32_to_cpu(bg->bg_inode_bitmap_lo) |
(EXT4_DESC_SIZE(sb) >= EXT4_MIN_DESC_SIZE_64BIT ?
(ext4_fsblk_t)le32_to_cpu(bg->bg_inode_bitmap_hi) << 32 : 0);
}
ext4_fsblk_t ext4_inode_table(struct super_block *sb,
struct ext4_group_desc *bg)
{
return le32_to_cpu(bg->bg_inode_table_lo) |
(EXT4_DESC_SIZE(sb) >= EXT4_MIN_DESC_SIZE_64BIT ?
(ext4_fsblk_t)le32_to_cpu(bg->bg_inode_table_hi) << 32 : 0);
}
__u32 ext4_free_group_clusters(struct super_block *sb,
struct ext4_group_desc *bg)
{
return le16_to_cpu(bg->bg_free_blocks_count_lo) |
(EXT4_DESC_SIZE(sb) >= EXT4_MIN_DESC_SIZE_64BIT ?
(__u32)le16_to_cpu(bg->bg_free_blocks_count_hi) << 16 : 0);
}
__u32 ext4_free_inodes_count(struct super_block *sb,
struct ext4_group_desc *bg)
{
return le16_to_cpu(bg->bg_free_inodes_count_lo) |
(EXT4_DESC_SIZE(sb) >= EXT4_MIN_DESC_SIZE_64BIT ?
(__u32)le16_to_cpu(bg->bg_free_inodes_count_hi) << 16 : 0);
}
__u32 ext4_used_dirs_count(struct super_block *sb,
struct ext4_group_desc *bg)
{
return le16_to_cpu(bg->bg_used_dirs_count_lo) |
(EXT4_DESC_SIZE(sb) >= EXT4_MIN_DESC_SIZE_64BIT ?
(__u32)le16_to_cpu(bg->bg_used_dirs_count_hi) << 16 : 0);
}
__u32 ext4_itable_unused_count(struct super_block *sb,
struct ext4_group_desc *bg)
{
return le16_to_cpu(bg->bg_itable_unused_lo) |
(EXT4_DESC_SIZE(sb) >= EXT4_MIN_DESC_SIZE_64BIT ?
(__u32)le16_to_cpu(bg->bg_itable_unused_hi) << 16 : 0);
}
void ext4_block_bitmap_set(struct super_block *sb,
struct ext4_group_desc *bg, ext4_fsblk_t blk)
{
bg->bg_block_bitmap_lo = cpu_to_le32((u32)blk);
if (EXT4_DESC_SIZE(sb) >= EXT4_MIN_DESC_SIZE_64BIT)
bg->bg_block_bitmap_hi = cpu_to_le32(blk >> 32);
}
void ext4_inode_bitmap_set(struct super_block *sb,
struct ext4_group_desc *bg, ext4_fsblk_t blk)
{
bg->bg_inode_bitmap_lo = cpu_to_le32((u32)blk);
if (EXT4_DESC_SIZE(sb) >= EXT4_MIN_DESC_SIZE_64BIT)
bg->bg_inode_bitmap_hi = cpu_to_le32(blk >> 32);
}
void ext4_inode_table_set(struct super_block *sb,
struct ext4_group_desc *bg, ext4_fsblk_t blk)
{
bg->bg_inode_table_lo = cpu_to_le32((u32)blk);
if (EXT4_DESC_SIZE(sb) >= EXT4_MIN_DESC_SIZE_64BIT)
bg->bg_inode_table_hi = cpu_to_le32(blk >> 32);
}
void ext4_free_group_clusters_set(struct super_block *sb,
struct ext4_group_desc *bg, __u32 count)
{
bg->bg_free_blocks_count_lo = cpu_to_le16((__u16)count);
if (EXT4_DESC_SIZE(sb) >= EXT4_MIN_DESC_SIZE_64BIT)
bg->bg_free_blocks_count_hi = cpu_to_le16(count >> 16);
}
void ext4_free_inodes_set(struct super_block *sb,
struct ext4_group_desc *bg, __u32 count)
{
bg->bg_free_inodes_count_lo = cpu_to_le16((__u16)count);
if (EXT4_DESC_SIZE(sb) >= EXT4_MIN_DESC_SIZE_64BIT)
bg->bg_free_inodes_count_hi = cpu_to_le16(count >> 16);
}
void ext4_used_dirs_set(struct super_block *sb,
struct ext4_group_desc *bg, __u32 count)
{
bg->bg_used_dirs_count_lo = cpu_to_le16((__u16)count);
if (EXT4_DESC_SIZE(sb) >= EXT4_MIN_DESC_SIZE_64BIT)
bg->bg_used_dirs_count_hi = cpu_to_le16(count >> 16);
}
void ext4_itable_unused_set(struct super_block *sb,
struct ext4_group_desc *bg, __u32 count)
{
bg->bg_itable_unused_lo = cpu_to_le16((__u16)count);
if (EXT4_DESC_SIZE(sb) >= EXT4_MIN_DESC_SIZE_64BIT)
bg->bg_itable_unused_hi = cpu_to_le16(count >> 16);
}
static void __ext4_update_tstamp(__le32 *lo, __u8 *hi, time64_t now)
{
now = clamp_val(now, 0, (1ull << 40) - 1);
*lo = cpu_to_le32(lower_32_bits(now));
*hi = upper_32_bits(now);
}
static time64_t __ext4_get_tstamp(__le32 *lo, __u8 *hi)
{
return ((time64_t)(*hi) << 32) + le32_to_cpu(*lo);
}
#define ext4_update_tstamp(es, tstamp) \
__ext4_update_tstamp(&(es)->tstamp, &(es)->tstamp ## _hi, \
ktime_get_real_seconds())
#define ext4_get_tstamp(es, tstamp) \
__ext4_get_tstamp(&(es)->tstamp, &(es)->tstamp ## _hi)
#define EXT4_SB_REFRESH_INTERVAL_SEC (3600) /* seconds (1 hour) */
#define EXT4_SB_REFRESH_INTERVAL_KB (16384) /* kilobytes (16MB) */
/*
* The ext4_maybe_update_superblock() function checks and updates the
* superblock if needed.
*
* This function is designed to update the on-disk superblock only under
* certain conditions to prevent excessive disk writes and unnecessary
* waking of the disk from sleep. The superblock will be updated if:
* 1. More than an hour has passed since the last superblock update, and
* 2. More than 16MB have been written since the last superblock update.
*
* @sb: The superblock
*/
static void ext4_maybe_update_superblock(struct super_block *sb)
{
struct ext4_sb_info *sbi = EXT4_SB(sb);
struct ext4_super_block *es = sbi->s_es;
journal_t *journal = sbi->s_journal;
time64_t now;
__u64 last_update;
__u64 lifetime_write_kbytes;
__u64 diff_size;
if (sb_rdonly(sb) || !(sb->s_flags & SB_ACTIVE) ||
!journal || (journal->j_flags & JBD2_UNMOUNT))
return;
now = ktime_get_real_seconds();
last_update = ext4_get_tstamp(es, s_wtime);
if (likely(now - last_update < EXT4_SB_REFRESH_INTERVAL_SEC))
return;
lifetime_write_kbytes = sbi->s_kbytes_written +
((part_stat_read(sb->s_bdev, sectors[STAT_WRITE]) -
sbi->s_sectors_written_start) >> 1);
/* Get the number of kilobytes not written to disk to account
* for statistics and compare with a multiple of 16 MB. This
* is used to determine when the next superblock commit should
* occur (i.e. not more often than once per 16MB if there was
* less written in an hour).
*/
diff_size = lifetime_write_kbytes - le64_to_cpu(es->s_kbytes_written);
if (diff_size > EXT4_SB_REFRESH_INTERVAL_KB)
schedule_work(&EXT4_SB(sb)->s_sb_upd_work);
}
Revert "ext4: remove block_device_ejected" This reverts commit 08439fec266c3cc5702953b4f54bdf5649357de0. Unfortunately we still need to test for bdi->dev to avoid a crash when a USB stick is yanked out while a file system is mounted: usb 2-2: USB disconnect, device number 2 Buffer I/O error on dev sdb1, logical block 15237120, lost sync page write JBD2: Error -5 detected when updating journal superblock for sdb1-8. BUG: unable to handle kernel paging request at 34beb000 IP: [<c136ce88>] __percpu_counter_add+0x18/0xc0 *pdpt = 0000000023db9001 *pde = 0000000000000000 Oops: 0000 [#1] SMP CPU: 0 PID: 4083 Comm: umount Tainted: G U OE 4.1.1-040101-generic #201507011435 Hardware name: LENOVO 7675CTO/7675CTO, BIOS 7NETC2WW (2.22 ) 03/22/2011 task: ebf06b50 ti: ebebc000 task.ti: ebebc000 EIP: 0060:[<c136ce88>] EFLAGS: 00010082 CPU: 0 EIP is at __percpu_counter_add+0x18/0xc0 EAX: f21c8e88 EBX: f21c8e88 ECX: 00000000 EDX: 00000001 ESI: 00000001 EDI: 00000000 EBP: ebebde60 ESP: ebebde40 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 CR0: 8005003b CR2: 34beb000 CR3: 33354200 CR4: 000007f0 Stack: c1abe100 edcb0098 edcb00ec ffffffff f21c8e68 ffffffff f21c8e68 f286d160 ebebde84 c1160454 00000010 00000282 f72a77f8 00000984 f72a77f8 f286d160 f286d170 ebebdea0 c11e613f 00000000 00000282 f72a77f8 edd7f4d0 00000000 Call Trace: [<c1160454>] account_page_dirtied+0x74/0x110 [<c11e613f>] __set_page_dirty+0x3f/0xb0 [<c11e6203>] mark_buffer_dirty+0x53/0xc0 [<c124a0cb>] ext4_commit_super+0x17b/0x250 [<c124ac71>] ext4_put_super+0xc1/0x320 [<c11f04ba>] ? fsnotify_unmount_inodes+0x1aa/0x1c0 [<c11cfeda>] ? evict_inodes+0xca/0xe0 [<c11b925a>] generic_shutdown_super+0x6a/0xe0 [<c10a1df0>] ? prepare_to_wait_event+0xd0/0xd0 [<c1165a50>] ? unregister_shrinker+0x40/0x50 [<c11b92f6>] kill_block_super+0x26/0x70 [<c11b94f5>] deactivate_locked_super+0x45/0x80 [<c11ba007>] deactivate_super+0x47/0x60 [<c11d2b39>] cleanup_mnt+0x39/0x80 [<c11d2bc0>] __cleanup_mnt+0x10/0x20 [<c1080b51>] task_work_run+0x91/0xd0 [<c1011e3c>] do_notify_resume+0x7c/0x90 [<c1720da5>] work_notify Code: 8b 55 e8 e9 f4 fe ff ff 90 90 90 90 90 90 90 90 90 90 90 55 89 e5 83 ec 20 89 5d f4 89 c3 89 75 f8 89 d6 89 7d fc 89 cf 8b 48 14 <64> 8b 01 89 45 ec 89 c2 8b 45 08 c1 fa 1f 01 75 ec 89 55 f0 89 EIP: [<c136ce88>] __percpu_counter_add+0x18/0xc0 SS:ESP 0068:ebebde40 CR2: 0000000034beb000 ---[ end trace dd564a7bea834ecd ]--- Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=101011 Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org
2015-08-16 14:03:57 +00:00
/*
* The del_gendisk() function uninitializes the disk-specific data
* structures, including the bdi structure, without telling anyone
* else. Once this happens, any attempt to call mark_buffer_dirty()
* (for example, by ext4_commit_super), will cause a kernel OOPS.
* This is a kludge to prevent these oops until we can put in a proper
* hook in del_gendisk() to inform the VFS and file system layers.
*/
static int block_device_ejected(struct super_block *sb)
{
struct inode *bd_inode = sb->s_bdev->bd_inode;
struct backing_dev_info *bdi = inode_to_bdi(bd_inode);
return bdi->dev == NULL;
}
static void ext4_journal_commit_callback(journal_t *journal, transaction_t *txn)
{
struct super_block *sb = journal->j_private;
struct ext4_sb_info *sbi = EXT4_SB(sb);
int error = is_journal_aborted(journal);
ext4: fix journal callback list traversal It is incorrect to use list_for_each_entry_safe() for journal callback traversial because ->next may be removed by other task: ->ext4_mb_free_metadata() ->ext4_mb_free_metadata() ->ext4_journal_callback_del() This results in the following issue: WARNING: at lib/list_debug.c:62 __list_del_entry+0x1c0/0x250() Hardware name: list_del corruption. prev->next should be ffff88019a4ec198, but was 6b6b6b6b6b6b6b6b Modules linked in: cpufreq_ondemand acpi_cpufreq freq_table mperf coretemp kvm_intel kvm crc32c_intel ghash_clmulni_intel microcode sg xhci_hcd button sd_mod crc_t10dif aesni_intel ablk_helper cryptd lrw aes_x86_64 xts gf128mul ahci libahci pata_acpi ata_generic dm_mirror dm_region_hash dm_log dm_mod Pid: 16400, comm: jbd2/dm-1-8 Tainted: G W 3.8.0-rc3+ #107 Call Trace: [<ffffffff8106fb0d>] warn_slowpath_common+0xad/0xf0 [<ffffffff8106fc06>] warn_slowpath_fmt+0x46/0x50 [<ffffffff813637e9>] ? ext4_journal_commit_callback+0x99/0xc0 [<ffffffff8148cae0>] __list_del_entry+0x1c0/0x250 [<ffffffff813637bf>] ext4_journal_commit_callback+0x6f/0xc0 [<ffffffff813ca336>] jbd2_journal_commit_transaction+0x23a6/0x2570 [<ffffffff8108aa42>] ? try_to_del_timer_sync+0x82/0xa0 [<ffffffff8108b491>] ? del_timer_sync+0x91/0x1e0 [<ffffffff813d3ecf>] kjournald2+0x19f/0x6a0 [<ffffffff810ad630>] ? wake_up_bit+0x40/0x40 [<ffffffff813d3d30>] ? bit_spin_lock+0x80/0x80 [<ffffffff810ac6be>] kthread+0x10e/0x120 [<ffffffff810ac5b0>] ? __init_kthread_worker+0x70/0x70 [<ffffffff818ff6ac>] ret_from_fork+0x7c/0xb0 [<ffffffff810ac5b0>] ? __init_kthread_worker+0x70/0x70 This patch fix the issue as follows: - ext4_journal_commit_callback() make list truly traversial safe simply by always starting from list_head - fix race between two ext4_journal_callback_del() and ext4_journal_callback_try_del() Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz> Cc: stable@vger.kernel.com
2013-04-04 02:08:52 +00:00
struct ext4_journal_cb_entry *jce;
ext4: fix journal callback list traversal It is incorrect to use list_for_each_entry_safe() for journal callback traversial because ->next may be removed by other task: ->ext4_mb_free_metadata() ->ext4_mb_free_metadata() ->ext4_journal_callback_del() This results in the following issue: WARNING: at lib/list_debug.c:62 __list_del_entry+0x1c0/0x250() Hardware name: list_del corruption. prev->next should be ffff88019a4ec198, but was 6b6b6b6b6b6b6b6b Modules linked in: cpufreq_ondemand acpi_cpufreq freq_table mperf coretemp kvm_intel kvm crc32c_intel ghash_clmulni_intel microcode sg xhci_hcd button sd_mod crc_t10dif aesni_intel ablk_helper cryptd lrw aes_x86_64 xts gf128mul ahci libahci pata_acpi ata_generic dm_mirror dm_region_hash dm_log dm_mod Pid: 16400, comm: jbd2/dm-1-8 Tainted: G W 3.8.0-rc3+ #107 Call Trace: [<ffffffff8106fb0d>] warn_slowpath_common+0xad/0xf0 [<ffffffff8106fc06>] warn_slowpath_fmt+0x46/0x50 [<ffffffff813637e9>] ? ext4_journal_commit_callback+0x99/0xc0 [<ffffffff8148cae0>] __list_del_entry+0x1c0/0x250 [<ffffffff813637bf>] ext4_journal_commit_callback+0x6f/0xc0 [<ffffffff813ca336>] jbd2_journal_commit_transaction+0x23a6/0x2570 [<ffffffff8108aa42>] ? try_to_del_timer_sync+0x82/0xa0 [<ffffffff8108b491>] ? del_timer_sync+0x91/0x1e0 [<ffffffff813d3ecf>] kjournald2+0x19f/0x6a0 [<ffffffff810ad630>] ? wake_up_bit+0x40/0x40 [<ffffffff813d3d30>] ? bit_spin_lock+0x80/0x80 [<ffffffff810ac6be>] kthread+0x10e/0x120 [<ffffffff810ac5b0>] ? __init_kthread_worker+0x70/0x70 [<ffffffff818ff6ac>] ret_from_fork+0x7c/0xb0 [<ffffffff810ac5b0>] ? __init_kthread_worker+0x70/0x70 This patch fix the issue as follows: - ext4_journal_commit_callback() make list truly traversial safe simply by always starting from list_head - fix race between two ext4_journal_callback_del() and ext4_journal_callback_try_del() Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz> Cc: stable@vger.kernel.com
2013-04-04 02:08:52 +00:00
BUG_ON(txn->t_state == T_FINISHED);
ext4_process_freed_data(sb, txn->t_tid);
ext4_maybe_update_superblock(sb);
spin_lock(&sbi->s_md_lock);
ext4: fix journal callback list traversal It is incorrect to use list_for_each_entry_safe() for journal callback traversial because ->next may be removed by other task: ->ext4_mb_free_metadata() ->ext4_mb_free_metadata() ->ext4_journal_callback_del() This results in the following issue: WARNING: at lib/list_debug.c:62 __list_del_entry+0x1c0/0x250() Hardware name: list_del corruption. prev->next should be ffff88019a4ec198, but was 6b6b6b6b6b6b6b6b Modules linked in: cpufreq_ondemand acpi_cpufreq freq_table mperf coretemp kvm_intel kvm crc32c_intel ghash_clmulni_intel microcode sg xhci_hcd button sd_mod crc_t10dif aesni_intel ablk_helper cryptd lrw aes_x86_64 xts gf128mul ahci libahci pata_acpi ata_generic dm_mirror dm_region_hash dm_log dm_mod Pid: 16400, comm: jbd2/dm-1-8 Tainted: G W 3.8.0-rc3+ #107 Call Trace: [<ffffffff8106fb0d>] warn_slowpath_common+0xad/0xf0 [<ffffffff8106fc06>] warn_slowpath_fmt+0x46/0x50 [<ffffffff813637e9>] ? ext4_journal_commit_callback+0x99/0xc0 [<ffffffff8148cae0>] __list_del_entry+0x1c0/0x250 [<ffffffff813637bf>] ext4_journal_commit_callback+0x6f/0xc0 [<ffffffff813ca336>] jbd2_journal_commit_transaction+0x23a6/0x2570 [<ffffffff8108aa42>] ? try_to_del_timer_sync+0x82/0xa0 [<ffffffff8108b491>] ? del_timer_sync+0x91/0x1e0 [<ffffffff813d3ecf>] kjournald2+0x19f/0x6a0 [<ffffffff810ad630>] ? wake_up_bit+0x40/0x40 [<ffffffff813d3d30>] ? bit_spin_lock+0x80/0x80 [<ffffffff810ac6be>] kthread+0x10e/0x120 [<ffffffff810ac5b0>] ? __init_kthread_worker+0x70/0x70 [<ffffffff818ff6ac>] ret_from_fork+0x7c/0xb0 [<ffffffff810ac5b0>] ? __init_kthread_worker+0x70/0x70 This patch fix the issue as follows: - ext4_journal_commit_callback() make list truly traversial safe simply by always starting from list_head - fix race between two ext4_journal_callback_del() and ext4_journal_callback_try_del() Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz> Cc: stable@vger.kernel.com
2013-04-04 02:08:52 +00:00
while (!list_empty(&txn->t_private_list)) {
jce = list_entry(txn->t_private_list.next,
struct ext4_journal_cb_entry, jce_list);
list_del_init(&jce->jce_list);
spin_unlock(&sbi->s_md_lock);
jce->jce_func(sb, jce, error);
spin_lock(&sbi->s_md_lock);
}
spin_unlock(&sbi->s_md_lock);
}
ext4: data=journal: write-protect pages on j_submit_inode_data_buffers() This implements journal callbacks j_submit|finish_inode_data_buffers() with different behavior for data=journal: to write-protect pages under commit, preventing changes to buffers writeably mapped to userspace. If a buffer's content changes between commit's checksum calculation and write-out to disk, it can cause journal recovery/mount failures upon a kernel crash or power loss. [ 27.334874] EXT4-fs: Warning: mounting with data=journal disables delayed allocation, dioread_nolock, and O_DIRECT support! [ 27.339492] JBD2: Invalid checksum recovering data block 8705 in log [ 27.342716] JBD2: recovery failed [ 27.343316] EXT4-fs (loop0): error loading journal mount: /ext4: can't read superblock on /dev/loop0. In j_submit_inode_data_buffers() we write-protect the inode's pages with write_cache_pages() and redirty w/ writepage callback if needed. In j_finish_inode_data_buffers() there is nothing do to. And in order to use the callbacks, inodes are added to the inode list in transaction in __ext4_journalled_writepage() and ext4_page_mkwrite(). In ext4_page_mkwrite() we must make sure that the buffers are attached to the transaction as jbddirty with write_end_fn(), as already done in __ext4_journalled_writepage(). Signed-off-by: Mauricio Faria de Oliveira <mfo@canonical.com> Reported-by: Dann Frazier <dann.frazier@canonical.com> Reported-by: kernel test robot <lkp@intel.com> # wbc.nr_to_write Suggested-by: Jan Kara <jack@suse.cz> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20201006004841.600488-5-mfo@canonical.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-10-06 00:48:41 +00:00
/*
* This writepage callback for write_cache_pages()
* takes care of a few cases after page cleaning.
*
* write_cache_pages() already checks for dirty pages
* and calls clear_page_dirty_for_io(), which we want,
* to write protect the pages.
*
* However, we may have to redirty a page (see below.)
*/
static int ext4_journalled_writepage_callback(struct folio *folio,
ext4: data=journal: write-protect pages on j_submit_inode_data_buffers() This implements journal callbacks j_submit|finish_inode_data_buffers() with different behavior for data=journal: to write-protect pages under commit, preventing changes to buffers writeably mapped to userspace. If a buffer's content changes between commit's checksum calculation and write-out to disk, it can cause journal recovery/mount failures upon a kernel crash or power loss. [ 27.334874] EXT4-fs: Warning: mounting with data=journal disables delayed allocation, dioread_nolock, and O_DIRECT support! [ 27.339492] JBD2: Invalid checksum recovering data block 8705 in log [ 27.342716] JBD2: recovery failed [ 27.343316] EXT4-fs (loop0): error loading journal mount: /ext4: can't read superblock on /dev/loop0. In j_submit_inode_data_buffers() we write-protect the inode's pages with write_cache_pages() and redirty w/ writepage callback if needed. In j_finish_inode_data_buffers() there is nothing do to. And in order to use the callbacks, inodes are added to the inode list in transaction in __ext4_journalled_writepage() and ext4_page_mkwrite(). In ext4_page_mkwrite() we must make sure that the buffers are attached to the transaction as jbddirty with write_end_fn(), as already done in __ext4_journalled_writepage(). Signed-off-by: Mauricio Faria de Oliveira <mfo@canonical.com> Reported-by: Dann Frazier <dann.frazier@canonical.com> Reported-by: kernel test robot <lkp@intel.com> # wbc.nr_to_write Suggested-by: Jan Kara <jack@suse.cz> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20201006004841.600488-5-mfo@canonical.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-10-06 00:48:41 +00:00
struct writeback_control *wbc,
void *data)
{
transaction_t *transaction = (transaction_t *) data;
struct buffer_head *bh, *head;
struct journal_head *jh;
bh = head = folio_buffers(folio);
ext4: data=journal: write-protect pages on j_submit_inode_data_buffers() This implements journal callbacks j_submit|finish_inode_data_buffers() with different behavior for data=journal: to write-protect pages under commit, preventing changes to buffers writeably mapped to userspace. If a buffer's content changes between commit's checksum calculation and write-out to disk, it can cause journal recovery/mount failures upon a kernel crash or power loss. [ 27.334874] EXT4-fs: Warning: mounting with data=journal disables delayed allocation, dioread_nolock, and O_DIRECT support! [ 27.339492] JBD2: Invalid checksum recovering data block 8705 in log [ 27.342716] JBD2: recovery failed [ 27.343316] EXT4-fs (loop0): error loading journal mount: /ext4: can't read superblock on /dev/loop0. In j_submit_inode_data_buffers() we write-protect the inode's pages with write_cache_pages() and redirty w/ writepage callback if needed. In j_finish_inode_data_buffers() there is nothing do to. And in order to use the callbacks, inodes are added to the inode list in transaction in __ext4_journalled_writepage() and ext4_page_mkwrite(). In ext4_page_mkwrite() we must make sure that the buffers are attached to the transaction as jbddirty with write_end_fn(), as already done in __ext4_journalled_writepage(). Signed-off-by: Mauricio Faria de Oliveira <mfo@canonical.com> Reported-by: Dann Frazier <dann.frazier@canonical.com> Reported-by: kernel test robot <lkp@intel.com> # wbc.nr_to_write Suggested-by: Jan Kara <jack@suse.cz> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20201006004841.600488-5-mfo@canonical.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-10-06 00:48:41 +00:00
do {
/*
* We have to redirty a page in these cases:
* 1) If buffer is dirty, it means the page was dirty because it
* contains a buffer that needs checkpointing. So the dirty bit
* needs to be preserved so that checkpointing writes the buffer
* properly.
* 2) If buffer is not part of the committing transaction
* (we may have just accidentally come across this buffer because
* inode range tracking is not exact) or if the currently running
* transaction already contains this buffer as well, dirty bit
* needs to be preserved so that the buffer gets writeprotected
* properly on running transaction's commit.
*/
jh = bh2jh(bh);
if (buffer_dirty(bh) ||
(jh && (jh->b_transaction != transaction ||
jh->b_next_transaction))) {
folio_redirty_for_writepage(wbc, folio);
ext4: data=journal: write-protect pages on j_submit_inode_data_buffers() This implements journal callbacks j_submit|finish_inode_data_buffers() with different behavior for data=journal: to write-protect pages under commit, preventing changes to buffers writeably mapped to userspace. If a buffer's content changes between commit's checksum calculation and write-out to disk, it can cause journal recovery/mount failures upon a kernel crash or power loss. [ 27.334874] EXT4-fs: Warning: mounting with data=journal disables delayed allocation, dioread_nolock, and O_DIRECT support! [ 27.339492] JBD2: Invalid checksum recovering data block 8705 in log [ 27.342716] JBD2: recovery failed [ 27.343316] EXT4-fs (loop0): error loading journal mount: /ext4: can't read superblock on /dev/loop0. In j_submit_inode_data_buffers() we write-protect the inode's pages with write_cache_pages() and redirty w/ writepage callback if needed. In j_finish_inode_data_buffers() there is nothing do to. And in order to use the callbacks, inodes are added to the inode list in transaction in __ext4_journalled_writepage() and ext4_page_mkwrite(). In ext4_page_mkwrite() we must make sure that the buffers are attached to the transaction as jbddirty with write_end_fn(), as already done in __ext4_journalled_writepage(). Signed-off-by: Mauricio Faria de Oliveira <mfo@canonical.com> Reported-by: Dann Frazier <dann.frazier@canonical.com> Reported-by: kernel test robot <lkp@intel.com> # wbc.nr_to_write Suggested-by: Jan Kara <jack@suse.cz> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20201006004841.600488-5-mfo@canonical.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-10-06 00:48:41 +00:00
goto out;
}
} while ((bh = bh->b_this_page) != head);
out:
return AOP_WRITEPAGE_ACTIVATE;
}
static int ext4_journalled_submit_inode_data_buffers(struct jbd2_inode *jinode)
{
struct address_space *mapping = jinode->i_vfs_inode->i_mapping;
struct writeback_control wbc = {
.sync_mode = WB_SYNC_ALL,
.nr_to_write = LONG_MAX,
.range_start = jinode->i_dirty_start,
.range_end = jinode->i_dirty_end,
};
return write_cache_pages(mapping, &wbc,
ext4_journalled_writepage_callback,
jinode->i_transaction);
}
static int ext4_journal_submit_inode_data_buffers(struct jbd2_inode *jinode)
{
int ret;
if (ext4_should_journal_data(jinode->i_vfs_inode))
ret = ext4_journalled_submit_inode_data_buffers(jinode);
else
ret = ext4_normal_submit_inode_data_buffers(jinode);
ext4: data=journal: write-protect pages on j_submit_inode_data_buffers() This implements journal callbacks j_submit|finish_inode_data_buffers() with different behavior for data=journal: to write-protect pages under commit, preventing changes to buffers writeably mapped to userspace. If a buffer's content changes between commit's checksum calculation and write-out to disk, it can cause journal recovery/mount failures upon a kernel crash or power loss. [ 27.334874] EXT4-fs: Warning: mounting with data=journal disables delayed allocation, dioread_nolock, and O_DIRECT support! [ 27.339492] JBD2: Invalid checksum recovering data block 8705 in log [ 27.342716] JBD2: recovery failed [ 27.343316] EXT4-fs (loop0): error loading journal mount: /ext4: can't read superblock on /dev/loop0. In j_submit_inode_data_buffers() we write-protect the inode's pages with write_cache_pages() and redirty w/ writepage callback if needed. In j_finish_inode_data_buffers() there is nothing do to. And in order to use the callbacks, inodes are added to the inode list in transaction in __ext4_journalled_writepage() and ext4_page_mkwrite(). In ext4_page_mkwrite() we must make sure that the buffers are attached to the transaction as jbddirty with write_end_fn(), as already done in __ext4_journalled_writepage(). Signed-off-by: Mauricio Faria de Oliveira <mfo@canonical.com> Reported-by: Dann Frazier <dann.frazier@canonical.com> Reported-by: kernel test robot <lkp@intel.com> # wbc.nr_to_write Suggested-by: Jan Kara <jack@suse.cz> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20201006004841.600488-5-mfo@canonical.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-10-06 00:48:41 +00:00
return ret;
}
static int ext4_journal_finish_inode_data_buffers(struct jbd2_inode *jinode)
{
int ret = 0;
if (!ext4_should_journal_data(jinode->i_vfs_inode))
ret = jbd2_journal_finish_inode_data_buffers(jinode);
return ret;
}
static bool system_going_down(void)
{
return system_state == SYSTEM_HALT || system_state == SYSTEM_POWER_OFF
|| system_state == SYSTEM_RESTART;
}
struct ext4_err_translation {
int code;
int errno;
};
#define EXT4_ERR_TRANSLATE(err) { .code = EXT4_ERR_##err, .errno = err }
static struct ext4_err_translation err_translation[] = {
EXT4_ERR_TRANSLATE(EIO),
EXT4_ERR_TRANSLATE(ENOMEM),
EXT4_ERR_TRANSLATE(EFSBADCRC),
EXT4_ERR_TRANSLATE(EFSCORRUPTED),
EXT4_ERR_TRANSLATE(ENOSPC),
EXT4_ERR_TRANSLATE(ENOKEY),
EXT4_ERR_TRANSLATE(EROFS),
EXT4_ERR_TRANSLATE(EFBIG),
EXT4_ERR_TRANSLATE(EEXIST),
EXT4_ERR_TRANSLATE(ERANGE),
EXT4_ERR_TRANSLATE(EOVERFLOW),
EXT4_ERR_TRANSLATE(EBUSY),
EXT4_ERR_TRANSLATE(ENOTDIR),
EXT4_ERR_TRANSLATE(ENOTEMPTY),
EXT4_ERR_TRANSLATE(ESHUTDOWN),
EXT4_ERR_TRANSLATE(EFAULT),
};
static int ext4_errno_to_code(int errno)
{
int i;
for (i = 0; i < ARRAY_SIZE(err_translation); i++)
if (err_translation[i].errno == errno)
return err_translation[i].code;
return EXT4_ERR_UNKNOWN;
}
static void save_error_info(struct super_block *sb, int error,
__u32 ino, __u64 block,
const char *func, unsigned int line)
{
struct ext4_sb_info *sbi = EXT4_SB(sb);
/* We default to EFSCORRUPTED error... */
if (error == 0)
error = EFSCORRUPTED;
spin_lock(&sbi->s_error_lock);
sbi->s_add_error_count++;
sbi->s_last_error_code = error;
sbi->s_last_error_line = line;
sbi->s_last_error_ino = ino;
sbi->s_last_error_block = block;
sbi->s_last_error_func = func;
sbi->s_last_error_time = ktime_get_real_seconds();
if (!sbi->s_first_error_time) {
sbi->s_first_error_code = error;
sbi->s_first_error_line = line;
sbi->s_first_error_ino = ino;
sbi->s_first_error_block = block;
sbi->s_first_error_func = func;
sbi->s_first_error_time = sbi->s_last_error_time;
}
spin_unlock(&sbi->s_error_lock);
}
/* Deal with the reporting of failure conditions on a filesystem such as
* inconsistencies detected or read IO failures.
*
* On ext2, we can store the error state of the filesystem in the
* superblock. That is not possible on ext4, because we may have other
* write ordering constraints on the superblock which prevent us from
* writing it out straight away; and given that the journal is about to
* be aborted, we can't rely on the current, or future, transactions to
* write out the superblock safely.
*
* We'll just use the jbd2_journal_abort() error code to record an error in
* the journal instead. On recovery, the journal will complain about
* that error until we've noted it down and cleared it.
*
* If force_ro is set, we unconditionally force the filesystem into an
* ABORT|READONLY state, unless the error response on the fs has been set to
* panic in which case we take the easy way out and panic immediately. This is
* used to deal with unrecoverable failures such as journal IO errors or ENOMEM
* at a critical moment in log management.
*/
static void ext4_handle_error(struct super_block *sb, bool force_ro, int error,
__u32 ino, __u64 block,
const char *func, unsigned int line)
{
journal_t *journal = EXT4_SB(sb)->s_journal;
bool continue_fs = !force_ro && test_opt(sb, ERRORS_CONT);
EXT4_SB(sb)->s_mount_state |= EXT4_ERROR_FS;
if (test_opt(sb, WARN_ON_ERROR))
WARN_ON_ONCE(1);
if (!continue_fs && !sb_rdonly(sb)) {
set_bit(EXT4_FLAGS_SHUTDOWN, &EXT4_SB(sb)->s_ext4_flags);
if (journal)
jbd2_journal_abort(journal, -EIO);
}
if (!bdev_read_only(sb->s_bdev)) {
save_error_info(sb, error, ino, block, func, line);
/*
* In case the fs should keep running, we need to writeout
* superblock through the journal. Due to lock ordering
* constraints, it may not be safe to do it right here so we
* defer superblock flushing to a workqueue.
*/
ext4: flush s_error_work before journal destroy in ext4_fill_super The error path in ext4_fill_super forget to flush s_error_work before journal destroy, and it may trigger the follow bug since flush_stashed_error_work can run concurrently with journal destroy without any protection for sbi->s_journal. [32031.740193] EXT4-fs (loop66): get root inode failed [32031.740484] EXT4-fs (loop66): mount failed [32031.759805] ------------[ cut here ]------------ [32031.759807] kernel BUG at fs/jbd2/transaction.c:373! [32031.760075] invalid opcode: 0000 [#1] SMP PTI [32031.760336] CPU: 5 PID: 1029268 Comm: kworker/5:1 Kdump: loaded 4.18.0 [32031.765112] Call Trace: [32031.765375] ? __switch_to_asm+0x35/0x70 [32031.765635] ? __switch_to_asm+0x41/0x70 [32031.765893] ? __switch_to_asm+0x35/0x70 [32031.766148] ? __switch_to_asm+0x41/0x70 [32031.766405] ? _cond_resched+0x15/0x40 [32031.766665] jbd2__journal_start+0xf1/0x1f0 [jbd2] [32031.766934] jbd2_journal_start+0x19/0x20 [jbd2] [32031.767218] flush_stashed_error_work+0x30/0x90 [ext4] [32031.767487] process_one_work+0x195/0x390 [32031.767747] worker_thread+0x30/0x390 [32031.768007] ? process_one_work+0x390/0x390 [32031.768265] kthread+0x10d/0x130 [32031.768521] ? kthread_flush_work_fn+0x10/0x10 [32031.768778] ret_from_fork+0x35/0x40 static int start_this_handle(...) BUG_ON(journal->j_flags & JBD2_UNMOUNT); <---- Trigger this Besides, after we enable fast commit, ext4_fc_replay can add work to s_error_work but return success, so the latter journal destroy in ext4_load_journal can trigger this problem too. Fix this problem with two steps: 1. Call ext4_commit_super directly in ext4_handle_error for the case that called from ext4_fc_replay 2. Since it's hard to pair the init and flush for s_error_work, we'd better add a extras flush_work before journal destroy in ext4_fill_super Besides, this patch will call ext4_commit_super in ext4_handle_error for any nojournal case too. But it seems safe since the reason we call schedule_work was that we should save error info to sb through journal if available. Conversely, for the nojournal case, it seems useless delay commit superblock to s_error_work. Fixes: c92dc856848f ("ext4: defer saving error info from atomic context") Fixes: 2d01ddc86606 ("ext4: save error info to sb through journal if available") Cc: stable@kernel.org Signed-off-by: yangerkun <yangerkun@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Link: https://lore.kernel.org/r/20210924093917.1953239-1-yangerkun@huawei.com
2021-09-24 09:39:17 +00:00
if (continue_fs && journal)
schedule_work(&EXT4_SB(sb)->s_sb_upd_work);
else
ext4_commit_super(sb);
}
/*
* We force ERRORS_RO behavior when system is rebooting. Otherwise we
* could panic during 'reboot -f' as the underlying device got already
* disabled.
*/
if (test_opt(sb, ERRORS_PANIC) && !system_going_down()) {
panic("EXT4-fs (device %s): panic forced after error\n",
sb->s_id);
}
if (sb_rdonly(sb) || continue_fs)
return;
ext4_msg(sb, KERN_CRIT, "Remounting filesystem read-only");
/*
* Make sure updated value of ->s_mount_flags will be visible before
* ->s_flags update
*/
smp_wmb();
sb->s_flags |= SB_RDONLY;
}
static void update_super_work(struct work_struct *work)
{
struct ext4_sb_info *sbi = container_of(work, struct ext4_sb_info,
s_sb_upd_work);
journal_t *journal = sbi->s_journal;
handle_t *handle;
/*
* If the journal is still running, we have to write out superblock
* through the journal to avoid collisions of other journalled sb
* updates.
*
* We use directly jbd2 functions here to avoid recursing back into
* ext4 error handling code during handling of previous errors.
*/
if (!sb_rdonly(sbi->s_sb) && journal) {
ext4: fix WARN_ON_ONCE(!buffer_uptodate) after an error writing the superblock If a writeback of the superblock fails with an I/O error, the buffer is marked not uptodate. However, this can cause a WARN_ON to trigger when we attempt to write superblock a second time. (Which might succeed this time, for cerrtain types of block devices such as iSCSI devices over a flaky network.) Try to detect this case in flush_stashed_error_work(), and also change __ext4_handle_dirty_metadata() so we always set the uptodate flag, not just in the nojournal case. Before this commit, this problem can be repliciated via: 1. dmsetup create dust1 --table '0 2097152 dust /dev/sdc 0 4096' 2. mount /dev/mapper/dust1 /home/test 3. dmsetup message dust1 0 addbadblock 0 10 4. cd /home/test 5. echo "XXXXXXX" > t After a few seconds, we got following warning: [ 80.654487] end_buffer_async_write: bh=0xffff88842f18bdd0 [ 80.656134] Buffer I/O error on dev dm-0, logical block 0, lost async page write [ 85.774450] EXT4-fs error (device dm-0): ext4_check_bdev_write_error:193: comm kworker/u16:8: Error while async write back metadata [ 91.415513] mark_buffer_dirty: bh=0xffff88842f18bdd0 [ 91.417038] ------------[ cut here ]------------ [ 91.418450] WARNING: CPU: 1 PID: 1944 at fs/buffer.c:1092 mark_buffer_dirty.cold+0x1c/0x5e [ 91.440322] Call Trace: [ 91.440652] __jbd2_journal_temp_unlink_buffer+0x135/0x220 [ 91.441354] __jbd2_journal_unfile_buffer+0x24/0x90 [ 91.441981] __jbd2_journal_refile_buffer+0x134/0x1d0 [ 91.442628] jbd2_journal_commit_transaction+0x249a/0x3240 [ 91.443336] ? put_prev_entity+0x2a/0x200 [ 91.443856] ? kjournald2+0x12e/0x510 [ 91.444324] kjournald2+0x12e/0x510 [ 91.444773] ? woken_wake_function+0x30/0x30 [ 91.445326] kthread+0x150/0x1b0 [ 91.445739] ? commit_timeout+0x20/0x20 [ 91.446258] ? kthread_flush_worker+0xb0/0xb0 [ 91.446818] ret_from_fork+0x1f/0x30 [ 91.447293] ---[ end trace 66f0b6bf3d1abade ]--- Signed-off-by: Ye Bin <yebin10@huawei.com> Link: https://lore.kernel.org/r/20210615090537.3423231-1-yebin10@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2021-06-15 09:05:37 +00:00
struct buffer_head *sbh = sbi->s_sbh;
bool call_notify_err = false;
handle = jbd2_journal_start(journal, 1);
if (IS_ERR(handle))
goto write_directly;
ext4: fix WARN_ON_ONCE(!buffer_uptodate) after an error writing the superblock If a writeback of the superblock fails with an I/O error, the buffer is marked not uptodate. However, this can cause a WARN_ON to trigger when we attempt to write superblock a second time. (Which might succeed this time, for cerrtain types of block devices such as iSCSI devices over a flaky network.) Try to detect this case in flush_stashed_error_work(), and also change __ext4_handle_dirty_metadata() so we always set the uptodate flag, not just in the nojournal case. Before this commit, this problem can be repliciated via: 1. dmsetup create dust1 --table '0 2097152 dust /dev/sdc 0 4096' 2. mount /dev/mapper/dust1 /home/test 3. dmsetup message dust1 0 addbadblock 0 10 4. cd /home/test 5. echo "XXXXXXX" > t After a few seconds, we got following warning: [ 80.654487] end_buffer_async_write: bh=0xffff88842f18bdd0 [ 80.656134] Buffer I/O error on dev dm-0, logical block 0, lost async page write [ 85.774450] EXT4-fs error (device dm-0): ext4_check_bdev_write_error:193: comm kworker/u16:8: Error while async write back metadata [ 91.415513] mark_buffer_dirty: bh=0xffff88842f18bdd0 [ 91.417038] ------------[ cut here ]------------ [ 91.418450] WARNING: CPU: 1 PID: 1944 at fs/buffer.c:1092 mark_buffer_dirty.cold+0x1c/0x5e [ 91.440322] Call Trace: [ 91.440652] __jbd2_journal_temp_unlink_buffer+0x135/0x220 [ 91.441354] __jbd2_journal_unfile_buffer+0x24/0x90 [ 91.441981] __jbd2_journal_refile_buffer+0x134/0x1d0 [ 91.442628] jbd2_journal_commit_transaction+0x249a/0x3240 [ 91.443336] ? put_prev_entity+0x2a/0x200 [ 91.443856] ? kjournald2+0x12e/0x510 [ 91.444324] kjournald2+0x12e/0x510 [ 91.444773] ? woken_wake_function+0x30/0x30 [ 91.445326] kthread+0x150/0x1b0 [ 91.445739] ? commit_timeout+0x20/0x20 [ 91.446258] ? kthread_flush_worker+0xb0/0xb0 [ 91.446818] ret_from_fork+0x1f/0x30 [ 91.447293] ---[ end trace 66f0b6bf3d1abade ]--- Signed-off-by: Ye Bin <yebin10@huawei.com> Link: https://lore.kernel.org/r/20210615090537.3423231-1-yebin10@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2021-06-15 09:05:37 +00:00
if (jbd2_journal_get_write_access(handle, sbh)) {
jbd2_journal_stop(handle);
goto write_directly;
}
if (sbi->s_add_error_count > 0)
call_notify_err = true;
ext4_update_super(sbi->s_sb);
ext4: fix WARN_ON_ONCE(!buffer_uptodate) after an error writing the superblock If a writeback of the superblock fails with an I/O error, the buffer is marked not uptodate. However, this can cause a WARN_ON to trigger when we attempt to write superblock a second time. (Which might succeed this time, for cerrtain types of block devices such as iSCSI devices over a flaky network.) Try to detect this case in flush_stashed_error_work(), and also change __ext4_handle_dirty_metadata() so we always set the uptodate flag, not just in the nojournal case. Before this commit, this problem can be repliciated via: 1. dmsetup create dust1 --table '0 2097152 dust /dev/sdc 0 4096' 2. mount /dev/mapper/dust1 /home/test 3. dmsetup message dust1 0 addbadblock 0 10 4. cd /home/test 5. echo "XXXXXXX" > t After a few seconds, we got following warning: [ 80.654487] end_buffer_async_write: bh=0xffff88842f18bdd0 [ 80.656134] Buffer I/O error on dev dm-0, logical block 0, lost async page write [ 85.774450] EXT4-fs error (device dm-0): ext4_check_bdev_write_error:193: comm kworker/u16:8: Error while async write back metadata [ 91.415513] mark_buffer_dirty: bh=0xffff88842f18bdd0 [ 91.417038] ------------[ cut here ]------------ [ 91.418450] WARNING: CPU: 1 PID: 1944 at fs/buffer.c:1092 mark_buffer_dirty.cold+0x1c/0x5e [ 91.440322] Call Trace: [ 91.440652] __jbd2_journal_temp_unlink_buffer+0x135/0x220 [ 91.441354] __jbd2_journal_unfile_buffer+0x24/0x90 [ 91.441981] __jbd2_journal_refile_buffer+0x134/0x1d0 [ 91.442628] jbd2_journal_commit_transaction+0x249a/0x3240 [ 91.443336] ? put_prev_entity+0x2a/0x200 [ 91.443856] ? kjournald2+0x12e/0x510 [ 91.444324] kjournald2+0x12e/0x510 [ 91.444773] ? woken_wake_function+0x30/0x30 [ 91.445326] kthread+0x150/0x1b0 [ 91.445739] ? commit_timeout+0x20/0x20 [ 91.446258] ? kthread_flush_worker+0xb0/0xb0 [ 91.446818] ret_from_fork+0x1f/0x30 [ 91.447293] ---[ end trace 66f0b6bf3d1abade ]--- Signed-off-by: Ye Bin <yebin10@huawei.com> Link: https://lore.kernel.org/r/20210615090537.3423231-1-yebin10@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2021-06-15 09:05:37 +00:00
if (buffer_write_io_error(sbh) || !buffer_uptodate(sbh)) {
ext4_msg(sbi->s_sb, KERN_ERR, "previous I/O error to "
"superblock detected");
clear_buffer_write_io_error(sbh);
set_buffer_uptodate(sbh);
}
if (jbd2_journal_dirty_metadata(handle, sbh)) {
jbd2_journal_stop(handle);
goto write_directly;
}
jbd2_journal_stop(handle);
if (call_notify_err)
ext4_notify_error_sysfs(sbi);
return;
}
write_directly:
/*
* Write through journal failed. Write sb directly to get error info
* out and hope for the best.
*/
ext4_commit_super(sbi->s_sb);
ext4_notify_error_sysfs(sbi);
}
#define ext4_error_ratelimit(sb) \
___ratelimit(&(EXT4_SB(sb)->s_err_ratelimit_state), \
"EXT4-fs error")
void __ext4_error(struct super_block *sb, const char *function,
unsigned int line, bool force_ro, int error, __u64 block,
const char *fmt, ...)
{
struct va_format vaf;
va_list args;
if (unlikely(ext4_forced_shutdown(sb)))
return;
trace_ext4_error(sb, function, line);
if (ext4_error_ratelimit(sb)) {
va_start(args, fmt);
vaf.fmt = fmt;
vaf.va = &args;
printk(KERN_CRIT
"EXT4-fs error (device %s): %s:%d: comm %s: %pV\n",
sb->s_id, function, line, current->comm, &vaf);
va_end(args);
}
fsnotify_sb_error(sb, NULL, error ? error : EFSCORRUPTED);
ext4_handle_error(sb, force_ro, error, 0, block, function, line);
}
void __ext4_error_inode(struct inode *inode, const char *function,
unsigned int line, ext4_fsblk_t block, int error,
const char *fmt, ...)
{
va_list args;
struct va_format vaf;
if (unlikely(ext4_forced_shutdown(inode->i_sb)))
return;
trace_ext4_error(inode->i_sb, function, line);
if (ext4_error_ratelimit(inode->i_sb)) {
va_start(args, fmt);
vaf.fmt = fmt;
vaf.va = &args;
if (block)
printk(KERN_CRIT "EXT4-fs error (device %s): %s:%d: "
"inode #%lu: block %llu: comm %s: %pV\n",
inode->i_sb->s_id, function, line, inode->i_ino,
block, current->comm, &vaf);
else
printk(KERN_CRIT "EXT4-fs error (device %s): %s:%d: "
"inode #%lu: comm %s: %pV\n",
inode->i_sb->s_id, function, line, inode->i_ino,
current->comm, &vaf);
va_end(args);
}
fsnotify_sb_error(inode->i_sb, inode, error ? error : EFSCORRUPTED);
ext4_handle_error(inode->i_sb, false, error, inode->i_ino, block,
function, line);
}
void __ext4_error_file(struct file *file, const char *function,
unsigned int line, ext4_fsblk_t block,
const char *fmt, ...)
{
va_list args;
struct va_format vaf;
struct inode *inode = file_inode(file);
char pathname[80], *path;
if (unlikely(ext4_forced_shutdown(inode->i_sb)))
return;
trace_ext4_error(inode->i_sb, function, line);
if (ext4_error_ratelimit(inode->i_sb)) {
path = file_path(file, pathname, sizeof(pathname));
if (IS_ERR(path))
path = "(unknown)";
va_start(args, fmt);
vaf.fmt = fmt;
vaf.va = &args;
if (block)
printk(KERN_CRIT
"EXT4-fs error (device %s): %s:%d: inode #%lu: "
"block %llu: comm %s: path %s: %pV\n",
inode->i_sb->s_id, function, line, inode->i_ino,
block, current->comm, path, &vaf);
else
printk(KERN_CRIT
"EXT4-fs error (device %s): %s:%d: inode #%lu: "
"comm %s: path %s: %pV\n",
inode->i_sb->s_id, function, line, inode->i_ino,
current->comm, path, &vaf);
va_end(args);
}
fsnotify_sb_error(inode->i_sb, inode, EFSCORRUPTED);
ext4_handle_error(inode->i_sb, false, EFSCORRUPTED, inode->i_ino, block,
function, line);
}
const char *ext4_decode_error(struct super_block *sb, int errno,
char nbuf[16])
{
char *errstr = NULL;
switch (errno) {
case -EFSCORRUPTED:
errstr = "Corrupt filesystem";
break;
case -EFSBADCRC:
errstr = "Filesystem failed CRC";
break;
case -EIO:
errstr = "IO failure";
break;
case -ENOMEM:
errstr = "Out of memory";
break;
case -EROFS:
if (!sb || (EXT4_SB(sb)->s_journal &&
EXT4_SB(sb)->s_journal->j_flags & JBD2_ABORT))
errstr = "Journal has aborted";
else
errstr = "Readonly filesystem";
break;
default:
/* If the caller passed in an extra buffer for unknown
* errors, textualise them now. Else we just return
* NULL. */
if (nbuf) {
/* Check for truncated error codes... */
if (snprintf(nbuf, 16, "error %d", -errno) >= 0)
errstr = nbuf;
}
break;
}
return errstr;
}
/* __ext4_std_error decodes expected errors from journaling functions
* automatically and invokes the appropriate error response. */
void __ext4_std_error(struct super_block *sb, const char *function,
unsigned int line, int errno)
{
char nbuf[16];
const char *errstr;
if (unlikely(ext4_forced_shutdown(sb)))
return;
/* Special case: if the error is EROFS, and we're not already
* inside a transaction, then there's really no point in logging
* an error. */
if (errno == -EROFS && journal_current_handle() == NULL && sb_rdonly(sb))
return;
if (ext4_error_ratelimit(sb)) {
errstr = ext4_decode_error(sb, errno, nbuf);
printk(KERN_CRIT "EXT4-fs error (device %s) in %s:%d: %s\n",
sb->s_id, function, line, errstr);
}
fsnotify_sb_error(sb, NULL, errno ? errno : EFSCORRUPTED);
ext4_handle_error(sb, false, -errno, 0, 0, function, line);
}
void __ext4_msg(struct super_block *sb,
const char *prefix, const char *fmt, ...)
{
struct va_format vaf;
va_list args;
if (sb) {
atomic_inc(&EXT4_SB(sb)->s_msg_count);
if (!___ratelimit(&(EXT4_SB(sb)->s_msg_ratelimit_state),
"EXT4-fs"))
return;
}
va_start(args, fmt);
vaf.fmt = fmt;
vaf.va = &args;
if (sb)
printk("%sEXT4-fs (%s): %pV\n", prefix, sb->s_id, &vaf);
else
printk("%sEXT4-fs: %pV\n", prefix, &vaf);
va_end(args);
}
static int ext4_warning_ratelimit(struct super_block *sb)
{
atomic_inc(&EXT4_SB(sb)->s_warning_count);
return ___ratelimit(&(EXT4_SB(sb)->s_warning_ratelimit_state),
"EXT4-fs warning");
}
void __ext4_warning(struct super_block *sb, const char *function,
unsigned int line, const char *fmt, ...)
{
struct va_format vaf;
va_list args;
if (!ext4_warning_ratelimit(sb))
return;
va_start(args, fmt);
vaf.fmt = fmt;
vaf.va = &args;
printk(KERN_WARNING "EXT4-fs warning (device %s): %s:%d: %pV\n",
sb->s_id, function, line, &vaf);
va_end(args);
}
void __ext4_warning_inode(const struct inode *inode, const char *function,
unsigned int line, const char *fmt, ...)
{
struct va_format vaf;
va_list args;
if (!ext4_warning_ratelimit(inode->i_sb))
return;
va_start(args, fmt);
vaf.fmt = fmt;
vaf.va = &args;
printk(KERN_WARNING "EXT4-fs warning (device %s): %s:%d: "
"inode #%lu: comm %s: %pV\n", inode->i_sb->s_id,
function, line, inode->i_ino, current->comm, &vaf);
va_end(args);
}
void __ext4_grp_locked_error(const char *function, unsigned int line,
struct super_block *sb, ext4_group_t grp,
unsigned long ino, ext4_fsblk_t block,
const char *fmt, ...)
__releases(bitlock)
__acquires(bitlock)
{
struct va_format vaf;
va_list args;
if (unlikely(ext4_forced_shutdown(sb)))
return;
trace_ext4_error(sb, function, line);
if (ext4_error_ratelimit(sb)) {
va_start(args, fmt);
vaf.fmt = fmt;
vaf.va = &args;
printk(KERN_CRIT "EXT4-fs error (device %s): %s:%d: group %u, ",
sb->s_id, function, line, grp);
if (ino)
printk(KERN_CONT "inode %lu: ", ino);
if (block)
printk(KERN_CONT "block %llu:",
(unsigned long long) block);
printk(KERN_CONT "%pV\n", &vaf);
va_end(args);
}
if (test_opt(sb, ERRORS_CONT)) {
if (test_opt(sb, WARN_ON_ERROR))
WARN_ON_ONCE(1);
EXT4_SB(sb)->s_mount_state |= EXT4_ERROR_FS;
if (!bdev_read_only(sb->s_bdev)) {
save_error_info(sb, EFSCORRUPTED, ino, block, function,
line);
schedule_work(&EXT4_SB(sb)->s_sb_upd_work);
}
return;
}
ext4_unlock_group(sb, grp);
ext4_handle_error(sb, false, EFSCORRUPTED, ino, block, function, line);
/*
* We only get here in the ERRORS_RO case; relocking the group
* may be dangerous, but nothing bad will happen since the
* filesystem will have already been marked read/only and the
* journal has been aborted. We return 1 as a hint to callers
* who might what to use the return value from
* ext4_grp_locked_error() to distinguish between the
* ERRORS_CONT and ERRORS_RO case, and perhaps return more
* aggressively from the ext4 function in question, with a
* more appropriate error code.
*/
ext4_lock_group(sb, grp);
return;
}
void ext4_mark_group_bitmap_corrupted(struct super_block *sb,
ext4_group_t group,
unsigned int flags)
{
struct ext4_sb_info *sbi = EXT4_SB(sb);
struct ext4_group_info *grp = ext4_get_group_info(sb, group);
struct ext4_group_desc *gdp = ext4_get_group_desc(sb, group, NULL);
int ret;
ext4: allow ext4_get_group_info() to fail Previously, ext4_get_group_info() would treat an invalid group number as BUG(), since in theory it should never happen. However, if a malicious attaker (or fuzzer) modifies the superblock via the block device while it is the file system is mounted, it is possible for s_first_data_block to get set to a very large number. In that case, when calculating the block group of some block number (such as the starting block of a preallocation region), could result in an underflow and very large block group number. Then the BUG_ON check in ext4_get_group_info() would fire, resutling in a denial of service attack that can be triggered by root or someone with write access to the block device. For a quality of implementation perspective, it's best that even if the system administrator does something that they shouldn't, that it will not trigger a BUG. So instead of BUG'ing, ext4_get_group_info() will call ext4_error and return NULL. We also add fallback code in all of the callers of ext4_get_group_info() that it might NULL. Also, since ext4_get_group_info() was already borderline to be an inline function, un-inline it. The results in a next reduction of the compiled text size of ext4 by roughly 2k. Cc: stable@kernel.org Link: https://lore.kernel.org/r/20230430154311.579720-2-tytso@mit.edu Reported-by: syzbot+e2efa3efc15a1c9e95c3@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?id=69b28112e098b070f639efb356393af3ffec4220 Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz>
2023-04-29 04:06:28 +00:00
if (!grp || !gdp)
return;
if (flags & EXT4_GROUP_INFO_BBITMAP_CORRUPT) {
ret = ext4_test_and_set_bit(EXT4_GROUP_INFO_BBITMAP_CORRUPT_BIT,
&grp->bb_state);
if (!ret)
percpu_counter_sub(&sbi->s_freeclusters_counter,
grp->bb_free);
}
if (flags & EXT4_GROUP_INFO_IBITMAP_CORRUPT) {
ret = ext4_test_and_set_bit(EXT4_GROUP_INFO_IBITMAP_CORRUPT_BIT,
&grp->bb_state);
if (!ret && gdp) {
int count;
count = ext4_free_inodes_count(sb, gdp);
percpu_counter_sub(&sbi->s_freeinodes_counter,
count);
}
}
}
void ext4_update_dynamic_rev(struct super_block *sb)
{
struct ext4_super_block *es = EXT4_SB(sb)->s_es;
if (le32_to_cpu(es->s_rev_level) > EXT4_GOOD_OLD_REV)
return;
ext4_warning(sb,
"updating to rev %d because of new feature flag, "
"running e2fsck is recommended",
EXT4_DYNAMIC_REV);
es->s_first_ino = cpu_to_le32(EXT4_GOOD_OLD_FIRST_INO);
es->s_inode_size = cpu_to_le16(EXT4_GOOD_OLD_INODE_SIZE);
es->s_rev_level = cpu_to_le32(EXT4_DYNAMIC_REV);
/* leave es->s_feature_*compat flags alone */
/* es->s_uuid will be set by e2fsck if empty */
/*
* The rest of the superblock fields should be zero, and if not it
* means they are likely already in use, so leave them alone. We
* can leave it up to e2fsck to clean up any inconsistencies there.
*/
}
static inline struct inode *orphan_list_entry(struct list_head *l)
{
return &list_entry(l, struct ext4_inode_info, i_orphan)->vfs_inode;
}
static void dump_orphan_list(struct super_block *sb, struct ext4_sb_info *sbi)
{
struct list_head *l;
ext4_msg(sb, KERN_ERR, "sb orphan head is %d",
le32_to_cpu(sbi->s_es->s_last_orphan));
printk(KERN_ERR "sb_info orphan list:\n");
list_for_each(l, &sbi->s_orphan) {
struct inode *inode = orphan_list_entry(l);
printk(KERN_ERR " "
"inode %s:%lu at %p: mode %o, nlink %d, next %d\n",
inode->i_sb->s_id, inode->i_ino, inode,
inode->i_mode, inode->i_nlink,
NEXT_ORPHAN(inode));
}
}
#ifdef CONFIG_QUOTA
static int ext4_quota_off(struct super_block *sb, int type);
static inline void ext4_quotas_off(struct super_block *sb, int type)
{
BUG_ON(type > EXT4_MAXQUOTAS);
/* Use our quota_off function to clear inode flags etc. */
for (type--; type >= 0; type--)
ext4_quota_off(sb, type);
}
/*
* This is a helper function which is used in the mount/remount
* codepaths (which holds s_umount) to fetch the quota file name.
*/
static inline char *get_qf_name(struct super_block *sb,
struct ext4_sb_info *sbi,
int type)
{
return rcu_dereference_protected(sbi->s_qf_names[type],
lockdep_is_held(&sb->s_umount));
}
#else
static inline void ext4_quotas_off(struct super_block *sb, int type)
{
}
#endif
static int ext4_percpu_param_init(struct ext4_sb_info *sbi)
{
ext4_fsblk_t block;
int err;
block = ext4_count_free_clusters(sbi->s_sb);
ext4_free_blocks_count_set(sbi->s_es, EXT4_C2B(sbi, block));
err = percpu_counter_init(&sbi->s_freeclusters_counter, block,
GFP_KERNEL);
if (!err) {
unsigned long freei = ext4_count_free_inodes(sbi->s_sb);
sbi->s_es->s_free_inodes_count = cpu_to_le32(freei);
err = percpu_counter_init(&sbi->s_freeinodes_counter, freei,
GFP_KERNEL);
}
if (!err)
err = percpu_counter_init(&sbi->s_dirs_counter,
ext4_count_dirs(sbi->s_sb), GFP_KERNEL);
if (!err)
err = percpu_counter_init(&sbi->s_dirtyclusters_counter, 0,
GFP_KERNEL);
if (!err)
err = percpu_counter_init(&sbi->s_sra_exceeded_retry_limit, 0,
GFP_KERNEL);
if (!err)
err = percpu_init_rwsem(&sbi->s_writepages_rwsem);
if (err)
ext4_msg(sbi->s_sb, KERN_ERR, "insufficient memory");
return err;
}
static void ext4_percpu_param_destroy(struct ext4_sb_info *sbi)
{
percpu_counter_destroy(&sbi->s_freeclusters_counter);
percpu_counter_destroy(&sbi->s_freeinodes_counter);
percpu_counter_destroy(&sbi->s_dirs_counter);
percpu_counter_destroy(&sbi->s_dirtyclusters_counter);
percpu_counter_destroy(&sbi->s_sra_exceeded_retry_limit);
percpu_free_rwsem(&sbi->s_writepages_rwsem);
}
static void ext4_group_desc_free(struct ext4_sb_info *sbi)
{
struct buffer_head **group_desc;
int i;
rcu_read_lock();
group_desc = rcu_dereference(sbi->s_group_desc);
for (i = 0; i < sbi->s_gdb_count; i++)
brelse(group_desc[i]);
kvfree(group_desc);
rcu_read_unlock();
}
static void ext4_flex_groups_free(struct ext4_sb_info *sbi)
{
struct flex_groups **flex_groups;
int i;
rcu_read_lock();
flex_groups = rcu_dereference(sbi->s_flex_groups);
if (flex_groups) {
for (i = 0; i < sbi->s_flex_groups_allocated; i++)
kvfree(flex_groups[i]);
kvfree(flex_groups);
}
rcu_read_unlock();
}
static void ext4_put_super(struct super_block *sb)
{
struct ext4_sb_info *sbi = EXT4_SB(sb);
struct ext4_super_block *es = sbi->s_es;
int aborted = 0;
int err;
/*
* Unregister sysfs before destroying jbd2 journal.
* Since we could still access attr_journal_task attribute via sysfs
* path which could have sbi->s_journal->j_task as NULL
* Unregister sysfs before flush sbi->s_sb_upd_work.
ext4: fix bug_on in start_this_handle during umount filesystem We got issue as follows: ------------[ cut here ]------------ kernel BUG at fs/jbd2/transaction.c:389! invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 9 PID: 131 Comm: kworker/9:1 Not tainted 5.17.0-862.14.0.6.x86_64-00001-g23f87daf7d74-dirty #197 Workqueue: events flush_stashed_error_work RIP: 0010:start_this_handle+0x41c/0x1160 RSP: 0018:ffff888106b47c20 EFLAGS: 00010202 RAX: ffffed10251b8400 RBX: ffff888128dc204c RCX: ffffffffb52972ac RDX: 0000000000000200 RSI: 0000000000000004 RDI: ffff888128dc2050 RBP: 0000000000000039 R08: 0000000000000001 R09: ffffed10251b840a R10: ffff888128dc204f R11: ffffed10251b8409 R12: ffff888116d78000 R13: 0000000000000000 R14: dffffc0000000000 R15: ffff888128dc2000 FS: 0000000000000000(0000) GS:ffff88839d680000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000001620068 CR3: 0000000376c0e000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> jbd2__journal_start+0x38a/0x790 jbd2_journal_start+0x19/0x20 flush_stashed_error_work+0x110/0x2b3 process_one_work+0x688/0x1080 worker_thread+0x8b/0xc50 kthread+0x26f/0x310 ret_from_fork+0x22/0x30 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- Above issue may happen as follows: umount read procfs error_work ext4_put_super flush_work(&sbi->s_error_work); ext4_mb_seq_groups_show ext4_mb_load_buddy_gfp ext4_mb_init_group ext4_mb_init_cache ext4_read_block_bitmap_nowait ext4_validate_block_bitmap ext4_error ext4_handle_error schedule_work(&EXT4_SB(sb)->s_error_work); ext4_unregister_sysfs(sb); jbd2_journal_destroy(sbi->s_journal); journal_kill_thread journal->j_flags |= JBD2_UNMOUNT; flush_stashed_error_work jbd2_journal_start start_this_handle BUG_ON(journal->j_flags & JBD2_UNMOUNT); To solve this issue, we call 'ext4_unregister_sysfs() before flushing s_error_work in ext4_put_super(). Signed-off-by: Ye Bin <yebin10@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com> Link: https://lore.kernel.org/r/20220322012419.725457-1-yebin10@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2022-03-22 01:24:19 +00:00
* Since user may read /proc/fs/ext4/xx/mb_groups during umount, If
* read metadata verify failed then will queue error work.
* update_super_work will call start_this_handle may trigger
ext4: fix bug_on in start_this_handle during umount filesystem We got issue as follows: ------------[ cut here ]------------ kernel BUG at fs/jbd2/transaction.c:389! invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 9 PID: 131 Comm: kworker/9:1 Not tainted 5.17.0-862.14.0.6.x86_64-00001-g23f87daf7d74-dirty #197 Workqueue: events flush_stashed_error_work RIP: 0010:start_this_handle+0x41c/0x1160 RSP: 0018:ffff888106b47c20 EFLAGS: 00010202 RAX: ffffed10251b8400 RBX: ffff888128dc204c RCX: ffffffffb52972ac RDX: 0000000000000200 RSI: 0000000000000004 RDI: ffff888128dc2050 RBP: 0000000000000039 R08: 0000000000000001 R09: ffffed10251b840a R10: ffff888128dc204f R11: ffffed10251b8409 R12: ffff888116d78000 R13: 0000000000000000 R14: dffffc0000000000 R15: ffff888128dc2000 FS: 0000000000000000(0000) GS:ffff88839d680000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000001620068 CR3: 0000000376c0e000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> jbd2__journal_start+0x38a/0x790 jbd2_journal_start+0x19/0x20 flush_stashed_error_work+0x110/0x2b3 process_one_work+0x688/0x1080 worker_thread+0x8b/0xc50 kthread+0x26f/0x310 ret_from_fork+0x22/0x30 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- Above issue may happen as follows: umount read procfs error_work ext4_put_super flush_work(&sbi->s_error_work); ext4_mb_seq_groups_show ext4_mb_load_buddy_gfp ext4_mb_init_group ext4_mb_init_cache ext4_read_block_bitmap_nowait ext4_validate_block_bitmap ext4_error ext4_handle_error schedule_work(&EXT4_SB(sb)->s_error_work); ext4_unregister_sysfs(sb); jbd2_journal_destroy(sbi->s_journal); journal_kill_thread journal->j_flags |= JBD2_UNMOUNT; flush_stashed_error_work jbd2_journal_start start_this_handle BUG_ON(journal->j_flags & JBD2_UNMOUNT); To solve this issue, we call 'ext4_unregister_sysfs() before flushing s_error_work in ext4_put_super(). Signed-off-by: Ye Bin <yebin10@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com> Link: https://lore.kernel.org/r/20220322012419.725457-1-yebin10@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2022-03-22 01:24:19 +00:00
* BUG_ON.
*/
ext4_unregister_sysfs(sb);
if (___ratelimit(&ext4_mount_msg_ratelimit, "EXT4-fs unmount"))
ext4_msg(sb, KERN_INFO, "unmounting filesystem %pU.",
&sb->s_uuid);
ext4: fix bug_on in start_this_handle during umount filesystem We got issue as follows: ------------[ cut here ]------------ kernel BUG at fs/jbd2/transaction.c:389! invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 9 PID: 131 Comm: kworker/9:1 Not tainted 5.17.0-862.14.0.6.x86_64-00001-g23f87daf7d74-dirty #197 Workqueue: events flush_stashed_error_work RIP: 0010:start_this_handle+0x41c/0x1160 RSP: 0018:ffff888106b47c20 EFLAGS: 00010202 RAX: ffffed10251b8400 RBX: ffff888128dc204c RCX: ffffffffb52972ac RDX: 0000000000000200 RSI: 0000000000000004 RDI: ffff888128dc2050 RBP: 0000000000000039 R08: 0000000000000001 R09: ffffed10251b840a R10: ffff888128dc204f R11: ffffed10251b8409 R12: ffff888116d78000 R13: 0000000000000000 R14: dffffc0000000000 R15: ffff888128dc2000 FS: 0000000000000000(0000) GS:ffff88839d680000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000001620068 CR3: 0000000376c0e000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> jbd2__journal_start+0x38a/0x790 jbd2_journal_start+0x19/0x20 flush_stashed_error_work+0x110/0x2b3 process_one_work+0x688/0x1080 worker_thread+0x8b/0xc50 kthread+0x26f/0x310 ret_from_fork+0x22/0x30 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- Above issue may happen as follows: umount read procfs error_work ext4_put_super flush_work(&sbi->s_error_work); ext4_mb_seq_groups_show ext4_mb_load_buddy_gfp ext4_mb_init_group ext4_mb_init_cache ext4_read_block_bitmap_nowait ext4_validate_block_bitmap ext4_error ext4_handle_error schedule_work(&EXT4_SB(sb)->s_error_work); ext4_unregister_sysfs(sb); jbd2_journal_destroy(sbi->s_journal); journal_kill_thread journal->j_flags |= JBD2_UNMOUNT; flush_stashed_error_work jbd2_journal_start start_this_handle BUG_ON(journal->j_flags & JBD2_UNMOUNT); To solve this issue, we call 'ext4_unregister_sysfs() before flushing s_error_work in ext4_put_super(). Signed-off-by: Ye Bin <yebin10@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com> Link: https://lore.kernel.org/r/20220322012419.725457-1-yebin10@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2022-03-22 01:24:19 +00:00
ext4_unregister_li_request(sb);
ext4_quotas_off(sb, EXT4_MAXQUOTAS);
ext4: fix bug_on in start_this_handle during umount filesystem We got issue as follows: ------------[ cut here ]------------ kernel BUG at fs/jbd2/transaction.c:389! invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 9 PID: 131 Comm: kworker/9:1 Not tainted 5.17.0-862.14.0.6.x86_64-00001-g23f87daf7d74-dirty #197 Workqueue: events flush_stashed_error_work RIP: 0010:start_this_handle+0x41c/0x1160 RSP: 0018:ffff888106b47c20 EFLAGS: 00010202 RAX: ffffed10251b8400 RBX: ffff888128dc204c RCX: ffffffffb52972ac RDX: 0000000000000200 RSI: 0000000000000004 RDI: ffff888128dc2050 RBP: 0000000000000039 R08: 0000000000000001 R09: ffffed10251b840a R10: ffff888128dc204f R11: ffffed10251b8409 R12: ffff888116d78000 R13: 0000000000000000 R14: dffffc0000000000 R15: ffff888128dc2000 FS: 0000000000000000(0000) GS:ffff88839d680000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000001620068 CR3: 0000000376c0e000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> jbd2__journal_start+0x38a/0x790 jbd2_journal_start+0x19/0x20 flush_stashed_error_work+0x110/0x2b3 process_one_work+0x688/0x1080 worker_thread+0x8b/0xc50 kthread+0x26f/0x310 ret_from_fork+0x22/0x30 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- Above issue may happen as follows: umount read procfs error_work ext4_put_super flush_work(&sbi->s_error_work); ext4_mb_seq_groups_show ext4_mb_load_buddy_gfp ext4_mb_init_group ext4_mb_init_cache ext4_read_block_bitmap_nowait ext4_validate_block_bitmap ext4_error ext4_handle_error schedule_work(&EXT4_SB(sb)->s_error_work); ext4_unregister_sysfs(sb); jbd2_journal_destroy(sbi->s_journal); journal_kill_thread journal->j_flags |= JBD2_UNMOUNT; flush_stashed_error_work jbd2_journal_start start_this_handle BUG_ON(journal->j_flags & JBD2_UNMOUNT); To solve this issue, we call 'ext4_unregister_sysfs() before flushing s_error_work in ext4_put_super(). Signed-off-by: Ye Bin <yebin10@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com> Link: https://lore.kernel.org/r/20220322012419.725457-1-yebin10@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2022-03-22 01:24:19 +00:00
flush_work(&sbi->s_sb_upd_work);
ext4: fix bug_on in start_this_handle during umount filesystem We got issue as follows: ------------[ cut here ]------------ kernel BUG at fs/jbd2/transaction.c:389! invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 9 PID: 131 Comm: kworker/9:1 Not tainted 5.17.0-862.14.0.6.x86_64-00001-g23f87daf7d74-dirty #197 Workqueue: events flush_stashed_error_work RIP: 0010:start_this_handle+0x41c/0x1160 RSP: 0018:ffff888106b47c20 EFLAGS: 00010202 RAX: ffffed10251b8400 RBX: ffff888128dc204c RCX: ffffffffb52972ac RDX: 0000000000000200 RSI: 0000000000000004 RDI: ffff888128dc2050 RBP: 0000000000000039 R08: 0000000000000001 R09: ffffed10251b840a R10: ffff888128dc204f R11: ffffed10251b8409 R12: ffff888116d78000 R13: 0000000000000000 R14: dffffc0000000000 R15: ffff888128dc2000 FS: 0000000000000000(0000) GS:ffff88839d680000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000001620068 CR3: 0000000376c0e000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> jbd2__journal_start+0x38a/0x790 jbd2_journal_start+0x19/0x20 flush_stashed_error_work+0x110/0x2b3 process_one_work+0x688/0x1080 worker_thread+0x8b/0xc50 kthread+0x26f/0x310 ret_from_fork+0x22/0x30 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- Above issue may happen as follows: umount read procfs error_work ext4_put_super flush_work(&sbi->s_error_work); ext4_mb_seq_groups_show ext4_mb_load_buddy_gfp ext4_mb_init_group ext4_mb_init_cache ext4_read_block_bitmap_nowait ext4_validate_block_bitmap ext4_error ext4_handle_error schedule_work(&EXT4_SB(sb)->s_error_work); ext4_unregister_sysfs(sb); jbd2_journal_destroy(sbi->s_journal); journal_kill_thread journal->j_flags |= JBD2_UNMOUNT; flush_stashed_error_work jbd2_journal_start start_this_handle BUG_ON(journal->j_flags & JBD2_UNMOUNT); To solve this issue, we call 'ext4_unregister_sysfs() before flushing s_error_work in ext4_put_super(). Signed-off-by: Ye Bin <yebin10@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com> Link: https://lore.kernel.org/r/20220322012419.725457-1-yebin10@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2022-03-22 01:24:19 +00:00
destroy_workqueue(sbi->rsv_conversion_wq);
ext4_release_orphan_info(sb);
if (sbi->s_journal) {
aborted = is_journal_aborted(sbi->s_journal);
err = jbd2_journal_destroy(sbi->s_journal);
sbi->s_journal = NULL;
if ((err < 0) && !aborted) {
ext4_abort(sb, -err, "Couldn't clean up the journal");
}
}
ext4: improve extent cache shrink mechanism to avoid to burn CPU time Now we maintain an proper in-order LRU list in ext4 to reclaim entries from extent status tree when we are under heavy memory pressure. For keeping this order, a spin lock is used to protect this list. But this lock burns a lot of CPU time. We can use the following steps to trigger it. % cd /dev/shm % dd if=/dev/zero of=ext4-img bs=1M count=2k % mkfs.ext4 ext4-img % mount -t ext4 -o loop ext4-img /mnt % cd /mnt % for ((i=0;i<160;i++)); do truncate -s 64g $i; done % for ((i=0;i<160;i++)); do cp $i /dev/null &; done % perf record -a -g % perf report This commit tries to fix this problem. Now a new member called i_touch_when is added into ext4_inode_info to record the last access time for an inode. Meanwhile we never need to keep a proper in-order LRU list. So this can avoid to burns some CPU time. When we try to reclaim some entries from extent status tree, we use list_sort() to get a proper in-order list. Then we traverse this list to discard some entries. In ext4_sb_info, we use s_es_last_sorted to record the last time of sorting this list. When we traverse the list, we skip the inode that is newer than this time, and move this inode to the tail of LRU list. When the head of the list is newer than s_es_last_sorted, we will sort the LRU list again. In this commit, we break the loop if s_extent_cache_cnt == 0 because that means that all extents in extent status tree have been reclaimed. Meanwhile in this commit, ext4_es_{un}register_shrinker()'s prototype is changed to save a local variable in these functions. Reported-by: Dave Hansen <dave.hansen@intel.com> Signed-off-by: Zheng Liu <wenqing.lz@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-07-01 12:12:37 +00:00
ext4_es_unregister_shrinker(sbi);
timer_shutdown_sync(&sbi->s_err_report);
ext4_release_system_zone(sb);
ext4_mb_release(sb);
ext4_ext_release(sb);
if (!sb_rdonly(sb) && !aborted) {
ext4_clear_feature_journal_needs_recovery(sb);
ext4: Speedup ext4 orphan inode handling Ext4 orphan inode handling is a bottleneck for workloads which heavily truncate / unlink small files since it contends on the global s_orphan_mutex lock (and generally it's difficult to improve scalability of the ondisk linked list of orphaned inodes). This patch implements new way of handling orphan inodes. Instead of linking orphaned inode into a linked list, we store it's inode number in a new special file which we call "orphan file". Only if there's no more space in the orphan file (too many inodes are currently orphaned) we fall back to using old style linked list. Currently we protect operations in the orphan file with a spinlock for simplicity but even in this setting we can substantially reduce the length of the critical section and thus speedup some workloads. In the next patch we improve this by making orphan handling lockless. Note that the change is backwards compatible when the filesystem is clean - the existence of the orphan file is a compat feature, we set another ro-compat feature indicating orphan file needs scanning for orphaned inodes when mounting filesystem read-write. This ro-compat feature gets cleared on unmount / remount read-only. Some performance data from 80 CPU Xeon Server with 512 GB of RAM, filesystem located on SSD, average of 5 runs: stress-orphan (microbenchmark truncating files byte-by-byte from N processes in parallel) Threads Time Time Vanilla Patched 1 1.057200 0.945600 2 1.680400 1.331800 4 2.547000 1.995000 8 7.049400 6.424200 16 14.827800 14.937600 32 40.948200 33.038200 64 87.787400 60.823600 128 206.504000 122.941400 So we can see significant wins all over the board. Reviewed-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20210816095713.16537-3-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2021-08-16 09:57:06 +00:00
ext4_clear_feature_orphan_present(sb);
es->s_state = cpu_to_le16(sbi->s_mount_state);
}
if (!sb_rdonly(sb))
ext4_commit_super(sb);
ext4_group_desc_free(sbi);
ext4_flex_groups_free(sbi);
ext4_percpu_param_destroy(sbi);
#ifdef CONFIG_QUOTA
for (int i = 0; i < EXT4_MAXQUOTAS; i++)
kfree(get_qf_name(sb, sbi, i));
#endif
/* Debugging code just in case the in-memory inode orphan list
* isn't empty. The on-disk one can be non-empty if we've
* detected an error and taken the fs readonly, but the
* in-memory list had better be clean by this point. */
if (!list_empty(&sbi->s_orphan))
dump_orphan_list(sb, sbi);
ASSERT(list_empty(&sbi->s_orphan));
sync_blockdev(sb->s_bdev);
invalidate_bdev(sb->s_bdev);
if (sbi->s_journal_bdev_file) {
/*
* Invalidate the journal device's buffers. We don't want them
* floating about in memory - the physical journal device may
* hotswapped, and it breaks the `ro-after' testing code.
*/
sync_blockdev(file_bdev(sbi->s_journal_bdev_file));
invalidate_bdev(file_bdev(sbi->s_journal_bdev_file));
}
ext4_xattr_destroy_cache(sbi->s_ea_inode_cache);
sbi->s_ea_inode_cache = NULL;
ext4_xattr_destroy_cache(sbi->s_ea_block_cache);
sbi->s_ea_block_cache = NULL;
ext4_stop_mmpd(sbi);
brelse(sbi->s_sbh);
sb->s_fs_info = NULL;
/*
* Now that we are completely done shutting down the
* superblock, we need to actually destroy the kobject.
*/
kobject_put(&sbi->s_kobj);
wait_for_completion(&sbi->s_kobj_unregister);
if (sbi->s_chksum_driver)
crypto_free_shash(sbi->s_chksum_driver);
kfree(sbi->s_blockgroup_lock);
dax: introduce holder for dax_device Patch series "v14 fsdax-rmap + v11 fsdax-reflink", v2. The patchset fsdax-rmap is aimed to support shared pages tracking for fsdax. It moves owner tracking from dax_assocaite_entry() to pmem device driver, by introducing an interface ->memory_failure() for struct pagemap. This interface is called by memory_failure() in mm, and implemented by pmem device. Then call holder operations to find the filesystem which the corrupted data located in, and call filesystem handler to track files or metadata associated with this page. Finally we are able to try to fix the corrupted data in filesystem and do other necessary processing, such as killing processes who are using the files affected. The call trace is like this: memory_failure() |* fsdax case |------------ |pgmap->ops->memory_failure() => pmem_pgmap_memory_failure() | dax_holder_notify_failure() => | dax_device->holder_ops->notify_failure() => | - xfs_dax_notify_failure() | |* xfs_dax_notify_failure() | |-------------------------- | | xfs_rmap_query_range() | | xfs_dax_failure_fn() | | * corrupted on metadata | | try to recover data, call xfs_force_shutdown() | | * corrupted on file data | | try to recover data, call mf_dax_kill_procs() |* normal case |------------- |mf_generic_kill_procs() The patchset fsdax-reflink attempts to add CoW support for fsdax, and takes XFS, which has both reflink and fsdax features, as an example. One of the key mechanisms needed to be implemented in fsdax is CoW. Copy the data from srcmap before we actually write data to the destination iomap. And we just copy range in which data won't be changed. Another mechanism is range comparison. In page cache case, readpage() is used to load data on disk to page cache in order to be able to compare data. In fsdax case, readpage() does not work. So, we need another compare data with direct access support. With the two mechanisms implemented in fsdax, we are able to make reflink and fsdax work together in XFS. This patch (of 14): To easily track filesystem from a pmem device, we introduce a holder for dax_device structure, and also its operation. This holder is used to remember who is using this dax_device: - When it is the backend of a filesystem, the holder will be the instance of this filesystem. - When this pmem device is one of the targets in a mapped device, the holder will be this mapped device. In this case, the mapped device has its own dax_device and it will follow the first rule. So that we can finally track to the filesystem we needed. The holder and holder_ops will be set when filesystem is being mounted, or an target device is being activated. Link: https://lkml.kernel.org/r/20220603053738.1218681-1-ruansy.fnst@fujitsu.com Link: https://lkml.kernel.org/r/20220603053738.1218681-2-ruansy.fnst@fujitsu.com Signed-off-by: Shiyang Ruan <ruansy.fnst@fujitsu.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dan Williams <dan.j.wiliams@intel.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Jane Chu <jane.chu@oracle.com> Cc: Goldwyn Rodrigues <rgoldwyn@suse.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Matthew Wilcox <willy@infradead.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Goldwyn Rodrigues <rgoldwyn@suse.com> Cc: Ritesh Harjani <riteshh@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-06-03 05:37:25 +00:00
fs_put_dax(sbi->s_daxdev, NULL);
fscrypt: handle test_dummy_encryption in more logical way The behavior of the test_dummy_encryption mount option is that when a new file (or directory or symlink) is created in an unencrypted directory, it's automatically encrypted using a dummy encryption policy. That's it; in particular, the encryption (or lack thereof) of existing files (or directories or symlinks) doesn't change. Unfortunately the implementation of test_dummy_encryption is a bit weird and confusing. When test_dummy_encryption is enabled and a file is being created in an unencrypted directory, we set up an encryption key (->i_crypt_info) for the directory. This isn't actually used to do any encryption, however, since the directory is still unencrypted! Instead, ->i_crypt_info is only used for inheriting the encryption policy. One consequence of this is that the filesystem ends up providing a "dummy context" (policy + nonce) instead of a "dummy policy". In commit ed318a6cc0b6 ("fscrypt: support test_dummy_encryption=v2"), I mistakenly thought this was required. However, actually the nonce only ends up being used to derive a key that is never used. Another consequence of this implementation is that it allows for 'inode->i_crypt_info != NULL && !IS_ENCRYPTED(inode)', which is an edge case that can be forgotten about. For example, currently FS_IOC_GET_ENCRYPTION_POLICY on an unencrypted directory may return the dummy encryption policy when the filesystem is mounted with test_dummy_encryption. That seems like the wrong thing to do, since again, the directory itself is not actually encrypted. Therefore, switch to a more logical and maintainable implementation where the dummy encryption policy inheritance is done without setting up keys for unencrypted directories. This involves: - Adding a function fscrypt_policy_to_inherit() which returns the encryption policy to inherit from a directory. This can be a real policy, a dummy policy, or no policy. - Replacing struct fscrypt_dummy_context, ->get_dummy_context(), etc. with struct fscrypt_dummy_policy, ->get_dummy_policy(), etc. - Making fscrypt_fname_encrypted_size() take an fscrypt_policy instead of an inode. Acked-by: Jaegeuk Kim <jaegeuk@kernel.org> Acked-by: Jeff Layton <jlayton@kernel.org> Link: https://lore.kernel.org/r/20200917041136.178600-13-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com>
2020-09-17 04:11:35 +00:00
fscrypt_free_dummy_policy(&sbi->s_dummy_enc_policy);
#if IS_ENABLED(CONFIG_UNICODE)
utf8_unload(sb->s_encoding);
#endif
kfree(sbi);
}
static struct kmem_cache *ext4_inode_cachep;
/*
* Called inside transaction, so use GFP_NOFS
*/
static struct inode *ext4_alloc_inode(struct super_block *sb)
{
struct ext4_inode_info *ei;
ei = alloc_inode_sb(sb, ext4_inode_cachep, GFP_NOFS);
if (!ei)
return NULL;
inode_set_iversion(&ei->vfs_inode, 1);
ext4: fix uninititialized value in 'ext4_evict_inode' Syzbot found the following issue: ===================================================== BUG: KMSAN: uninit-value in ext4_evict_inode+0xdd/0x26b0 fs/ext4/inode.c:180 ext4_evict_inode+0xdd/0x26b0 fs/ext4/inode.c:180 evict+0x365/0x9a0 fs/inode.c:664 iput_final fs/inode.c:1747 [inline] iput+0x985/0xdd0 fs/inode.c:1773 __ext4_new_inode+0xe54/0x7ec0 fs/ext4/ialloc.c:1361 ext4_mknod+0x376/0x840 fs/ext4/namei.c:2844 vfs_mknod+0x79d/0x830 fs/namei.c:3914 do_mknodat+0x47d/0xaa0 __do_sys_mknodat fs/namei.c:3992 [inline] __se_sys_mknodat fs/namei.c:3989 [inline] __ia32_sys_mknodat+0xeb/0x150 fs/namei.c:3989 do_syscall_32_irqs_on arch/x86/entry/common.c:112 [inline] __do_fast_syscall_32+0xa2/0x100 arch/x86/entry/common.c:178 do_fast_syscall_32+0x33/0x70 arch/x86/entry/common.c:203 do_SYSENTER_32+0x1b/0x20 arch/x86/entry/common.c:246 entry_SYSENTER_compat_after_hwframe+0x70/0x82 Uninit was created at: __alloc_pages+0x9f1/0xe80 mm/page_alloc.c:5578 alloc_pages+0xaae/0xd80 mm/mempolicy.c:2285 alloc_slab_page mm/slub.c:1794 [inline] allocate_slab+0x1b5/0x1010 mm/slub.c:1939 new_slab mm/slub.c:1992 [inline] ___slab_alloc+0x10c3/0x2d60 mm/slub.c:3180 __slab_alloc mm/slub.c:3279 [inline] slab_alloc_node mm/slub.c:3364 [inline] slab_alloc mm/slub.c:3406 [inline] __kmem_cache_alloc_lru mm/slub.c:3413 [inline] kmem_cache_alloc_lru+0x6f3/0xb30 mm/slub.c:3429 alloc_inode_sb include/linux/fs.h:3117 [inline] ext4_alloc_inode+0x5f/0x860 fs/ext4/super.c:1321 alloc_inode+0x83/0x440 fs/inode.c:259 new_inode_pseudo fs/inode.c:1018 [inline] new_inode+0x3b/0x430 fs/inode.c:1046 __ext4_new_inode+0x2a7/0x7ec0 fs/ext4/ialloc.c:959 ext4_mkdir+0x4d5/0x1560 fs/ext4/namei.c:2992 vfs_mkdir+0x62a/0x870 fs/namei.c:4035 do_mkdirat+0x466/0x7b0 fs/namei.c:4060 __do_sys_mkdirat fs/namei.c:4075 [inline] __se_sys_mkdirat fs/namei.c:4073 [inline] __ia32_sys_mkdirat+0xc4/0x120 fs/namei.c:4073 do_syscall_32_irqs_on arch/x86/entry/common.c:112 [inline] __do_fast_syscall_32+0xa2/0x100 arch/x86/entry/common.c:178 do_fast_syscall_32+0x33/0x70 arch/x86/entry/common.c:203 do_SYSENTER_32+0x1b/0x20 arch/x86/entry/common.c:246 entry_SYSENTER_compat_after_hwframe+0x70/0x82 CPU: 1 PID: 4625 Comm: syz-executor.2 Not tainted 6.1.0-rc4-syzkaller-62821-gcb231e2f67ec #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022 ===================================================== Now, 'ext4_alloc_inode()' didn't init 'ei->i_flags'. If new inode failed before set 'ei->i_flags' in '__ext4_new_inode()', then do 'iput()'. As after 6bc0d63dad7f commit will access 'ei->i_flags' in 'ext4_evict_inode()' which will lead to access uninit-value. To solve above issue just init 'ei->i_flags' in 'ext4_alloc_inode()'. Reported-by: syzbot+57b25da729eb0b88177d@syzkaller.appspotmail.com Signed-off-by: Ye Bin <yebin10@huawei.com> Fixes: 6bc0d63dad7f ("ext4: remove EA inode entry from mbcache on inode eviction") Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Eric Biggers <ebiggers@google.com> Link: https://lore.kernel.org/r/20221117073603.2598882-1-yebin@huaweicloud.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org
2022-11-17 07:36:03 +00:00
ei->i_flags = 0;
spin_lock_init(&ei->i_raw_lock);
ext4: Use rbtrees to manage PAs instead of inode i_prealloc_list Currently, the kernel uses i_prealloc_list to hold all the inode preallocations. This is known to cause degradation in performance in workloads which perform large number of sparse writes on a single file. This is mainly because functions like ext4_mb_normalize_request() and ext4_mb_use_preallocated() iterate over this complete list, resulting in slowdowns when large number of PAs are present. Patch 27bc446e2 partially fixed this by enforcing a limit of 512 for the inode preallocation list and adding logic to continually trim the list if it grows above the threshold, however our testing revealed that a hardcoded value is not suitable for all kinds of workloads. To optimize this, add an rbtree to the inode and hold the inode preallocations in this rbtree. This will make iterating over inode PAs faster and scale much better than a linked list. Additionally, we also had to remove the LRU logic that was added during trimming of the list (in ext4_mb_release_context()) as it will add extra overhead in rbtree. The discards now happen in the lowest-logical-offset-first order. ** Locking notes ** With the introduction of rbtree to maintain inode PAs, we can't use RCU to walk the tree for searching since it can result in partial traversals which might miss some nodes(or entire subtrees) while discards happen in parallel (which happens under a lock). Hence this patch converts the ei->i_prealloc_lock spin_lock to rw_lock. Almost all the codepaths that read/modify the PA rbtrees are protected by the higher level inode->i_data_sem (except ext4_mb_discard_group_preallocations() and ext4_clear_inode()) IIUC, the only place we need lock protection is when one thread is reading "searching" the PA rbtree (earlier protected under rcu_read_lock()) and another is "deleting" the PAs in ext4_mb_discard_group_preallocations() function (which iterates all the PAs using the grp->bb_prealloc_list and deletes PAs from the tree without taking any inode lock (i_data_sem)). So, this patch converts all rcu_read_lock/unlock() paths for inode list PA to use read_lock() and all places where we were using ei->i_prealloc_lock spinlock will now be using write_lock(). Note that this makes the fast path (searching of the right PA e.g. ext4_mb_use_preallocated() or ext4_mb_normalize_request()), now use read_lock() instead of rcu_read_lock/unlock(). Ths also will now block due to slow discard path (ext4_mb_discard_group_preallocations()) which uses write_lock(). But this is not as bad as it looks. This is because - 1. The slow path only occurs when the normal allocation failed and we can say that we are low on disk space. One can argue this scenario won't be much frequent. 2. ext4_mb_discard_group_preallocations(), locks and unlocks the rwlock for deleting every individual PA. This gives enough opportunity for the fast path to acquire the read_lock for searching the PA inode list. Suggested-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com> Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com> Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/4137bce8f6948fedd8bae134dabae24acfe699c6.1679731817.git.ojaswin@linux.ibm.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2023-03-25 08:13:41 +00:00
ei->i_prealloc_node = RB_ROOT;
atomic_set(&ei->i_prealloc_active, 0);
ext4: Use rbtrees to manage PAs instead of inode i_prealloc_list Currently, the kernel uses i_prealloc_list to hold all the inode preallocations. This is known to cause degradation in performance in workloads which perform large number of sparse writes on a single file. This is mainly because functions like ext4_mb_normalize_request() and ext4_mb_use_preallocated() iterate over this complete list, resulting in slowdowns when large number of PAs are present. Patch 27bc446e2 partially fixed this by enforcing a limit of 512 for the inode preallocation list and adding logic to continually trim the list if it grows above the threshold, however our testing revealed that a hardcoded value is not suitable for all kinds of workloads. To optimize this, add an rbtree to the inode and hold the inode preallocations in this rbtree. This will make iterating over inode PAs faster and scale much better than a linked list. Additionally, we also had to remove the LRU logic that was added during trimming of the list (in ext4_mb_release_context()) as it will add extra overhead in rbtree. The discards now happen in the lowest-logical-offset-first order. ** Locking notes ** With the introduction of rbtree to maintain inode PAs, we can't use RCU to walk the tree for searching since it can result in partial traversals which might miss some nodes(or entire subtrees) while discards happen in parallel (which happens under a lock). Hence this patch converts the ei->i_prealloc_lock spin_lock to rw_lock. Almost all the codepaths that read/modify the PA rbtrees are protected by the higher level inode->i_data_sem (except ext4_mb_discard_group_preallocations() and ext4_clear_inode()) IIUC, the only place we need lock protection is when one thread is reading "searching" the PA rbtree (earlier protected under rcu_read_lock()) and another is "deleting" the PAs in ext4_mb_discard_group_preallocations() function (which iterates all the PAs using the grp->bb_prealloc_list and deletes PAs from the tree without taking any inode lock (i_data_sem)). So, this patch converts all rcu_read_lock/unlock() paths for inode list PA to use read_lock() and all places where we were using ei->i_prealloc_lock spinlock will now be using write_lock(). Note that this makes the fast path (searching of the right PA e.g. ext4_mb_use_preallocated() or ext4_mb_normalize_request()), now use read_lock() instead of rcu_read_lock/unlock(). Ths also will now block due to slow discard path (ext4_mb_discard_group_preallocations()) which uses write_lock(). But this is not as bad as it looks. This is because - 1. The slow path only occurs when the normal allocation failed and we can say that we are low on disk space. One can argue this scenario won't be much frequent. 2. ext4_mb_discard_group_preallocations(), locks and unlocks the rwlock for deleting every individual PA. This gives enough opportunity for the fast path to acquire the read_lock for searching the PA inode list. Suggested-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com> Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com> Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/4137bce8f6948fedd8bae134dabae24acfe699c6.1679731817.git.ojaswin@linux.ibm.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2023-03-25 08:13:41 +00:00
rwlock_init(&ei->i_prealloc_lock);
ext4_es_init_tree(&ei->i_es_tree);
rwlock_init(&ei->i_es_lock);
INIT_LIST_HEAD(&ei->i_es_list);
ext4: track extent status tree shrinker delay statictics This commit adds some statictics in extent status tree shrinker. The purpose to add these is that we want to collect more details when we encounter a stall caused by extent status tree shrinker. Here we count the following statictics: stats: the number of all objects on all extent status trees the number of reclaimable objects on lru list cache hits/misses the last sorted interval the number of inodes on lru list average: scan time for shrinking some objects the number of shrunk objects maximum: the inode that has max nr. of objects on lru list the maximum scan time for shrinking some objects The output looks like below: $ cat /proc/fs/ext4/sda1/es_shrinker_info stats: 28228 objects 6341 reclaimable objects 5281/631 cache hits/misses 586 ms last sorted interval 250 inodes on lru list average: 153 us scan time 128 shrunk objects maximum: 255 inode (255 objects, 198 reclaimable) 125723 us max scan time If the lru list has never been sorted, the following line will not be printed: 586ms last sorted interval If there is an empty lru list, the following lines also will not be printed: 250 inodes on lru list ... maximum: 255 inode (255 objects, 198 reclaimable) 0 us max scan time Meanwhile in this commit a new trace point is defined to print some details in __ext4_es_shrink(). Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Jan Kara <jack@suse.cz> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Zheng Liu <wenqing.lz@taobao.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2014-09-02 02:26:49 +00:00
ei->i_es_all_nr = 0;
ei->i_es_shk_nr = 0;
ei->i_es_shrink_lblk = 0;
ei->i_reserved_data_blocks = 0;
spin_lock_init(&(ei->i_block_reservation_lock));
ext4_init_pending_tree(&ei->i_pending_tree);
#ifdef CONFIG_QUOTA
ei->i_reserved_quota = 0;
memset(&ei->i_dquot, 0, sizeof(ei->i_dquot));
#endif
ei->jinode = NULL;
INIT_LIST_HEAD(&ei->i_rsv_conversion_list);
spin_lock_init(&ei->i_completed_io_lock);
ei->i_sync_tid = 0;
ei->i_datasync_tid = 0;
atomic_set(&ei->i_unwritten, 0);
INIT_WORK(&ei->i_rsv_conversion_work, ext4_end_io_rsv_work);
ext4_fc_init_inode(&ei->vfs_inode);
mutex_init(&ei->i_fc_lock);
return &ei->vfs_inode;
}
static int ext4_drop_inode(struct inode *inode)
{
int drop = generic_drop_inode(inode);
if (!drop)
drop = fscrypt_drop_inode(inode);
trace_ext4_drop_inode(inode, drop);
return drop;
}
static void ext4_free_in_core_inode(struct inode *inode)
2011-01-07 06:49:49 +00:00
{
fscrypt_free_inode(inode);
if (!list_empty(&(EXT4_I(inode)->i_fc_list))) {
pr_warn("%s: inode %ld still in fc list",
__func__, inode->i_ino);
}
2011-01-07 06:49:49 +00:00
kmem_cache_free(ext4_inode_cachep, EXT4_I(inode));
}
static void ext4_destroy_inode(struct inode *inode)
{
if (!list_empty(&(EXT4_I(inode)->i_orphan))) {
ext4_msg(inode->i_sb, KERN_ERR,
"Inode %lu (%p): orphan list check failed!",
inode->i_ino, EXT4_I(inode));
print_hex_dump(KERN_INFO, "", DUMP_PREFIX_ADDRESS, 16, 4,
EXT4_I(inode), sizeof(struct ext4_inode_info),
true);
dump_stack();
}
if (EXT4_I(inode)->i_reserved_data_blocks)
ext4_msg(inode->i_sb, KERN_ERR,
"Inode %lu (%p): i_reserved_data_blocks (%u) not cleared!",
inode->i_ino, EXT4_I(inode),
EXT4_I(inode)->i_reserved_data_blocks);
}
static void ext4_shutdown(struct super_block *sb)
{
ext4_force_shutdown(sb, EXT4_GOING_FLAGS_NOLOGFLUSH);
}
static void init_once(void *foo)
{
struct ext4_inode_info *ei = foo;
INIT_LIST_HEAD(&ei->i_orphan);
init_rwsem(&ei->xattr_sem);
init_rwsem(&ei->i_data_sem);
inode_init_once(&ei->vfs_inode);
ext4_fc_init_inode(&ei->vfs_inode);
}
static int __init init_inodecache(void)
{
ext4: Define usercopy region in ext4_inode_cache slab cache The ext4 symlink pathnames, stored in struct ext4_inode_info.i_data and therefore contained in the ext4_inode_cache slab cache, need to be copied to/from userspace. cache object allocation: fs/ext4/super.c: ext4_alloc_inode(...): struct ext4_inode_info *ei; ... ei = kmem_cache_alloc(ext4_inode_cachep, GFP_NOFS); ... return &ei->vfs_inode; include/trace/events/ext4.h: #define EXT4_I(inode) \ (container_of(inode, struct ext4_inode_info, vfs_inode)) fs/ext4/namei.c: ext4_symlink(...): ... inode->i_link = (char *)&EXT4_I(inode)->i_data; example usage trace: readlink_copy+0x43/0x70 vfs_readlink+0x62/0x110 SyS_readlinkat+0x100/0x130 fs/namei.c: readlink_copy(..., link): ... copy_to_user(..., link, len) (inlined into vfs_readlink) generic_readlink(dentry, ...): struct inode *inode = d_inode(dentry); const char *link = inode->i_link; ... readlink_copy(..., link); In support of usercopy hardening, this patch defines a region in the ext4_inode_cache slab cache in which userspace copy operations are allowed. This region is known as the slab cache's usercopy region. Slab caches can now check that each dynamically sized copy operation involving cache-managed memory falls entirely within the slab's usercopy region. This patch is modified from Brad Spengler/PaX Team's PAX_USERCOPY whitelisting code in the last public patch of grsecurity/PaX based on my understanding of the code. Changes or omissions from the original code are mine and don't reflect the original grsecurity/PaX code. Signed-off-by: David Windsor <dave@nullcore.net> [kees: adjust commit log, provide usage trace] Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: linux-ext4@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org>
2017-06-11 02:50:36 +00:00
ext4_inode_cachep = kmem_cache_create_usercopy("ext4_inode_cache",
sizeof(struct ext4_inode_info), 0,
SLAB_RECLAIM_ACCOUNT | SLAB_ACCOUNT,
ext4: Define usercopy region in ext4_inode_cache slab cache The ext4 symlink pathnames, stored in struct ext4_inode_info.i_data and therefore contained in the ext4_inode_cache slab cache, need to be copied to/from userspace. cache object allocation: fs/ext4/super.c: ext4_alloc_inode(...): struct ext4_inode_info *ei; ... ei = kmem_cache_alloc(ext4_inode_cachep, GFP_NOFS); ... return &ei->vfs_inode; include/trace/events/ext4.h: #define EXT4_I(inode) \ (container_of(inode, struct ext4_inode_info, vfs_inode)) fs/ext4/namei.c: ext4_symlink(...): ... inode->i_link = (char *)&EXT4_I(inode)->i_data; example usage trace: readlink_copy+0x43/0x70 vfs_readlink+0x62/0x110 SyS_readlinkat+0x100/0x130 fs/namei.c: readlink_copy(..., link): ... copy_to_user(..., link, len) (inlined into vfs_readlink) generic_readlink(dentry, ...): struct inode *inode = d_inode(dentry); const char *link = inode->i_link; ... readlink_copy(..., link); In support of usercopy hardening, this patch defines a region in the ext4_inode_cache slab cache in which userspace copy operations are allowed. This region is known as the slab cache's usercopy region. Slab caches can now check that each dynamically sized copy operation involving cache-managed memory falls entirely within the slab's usercopy region. This patch is modified from Brad Spengler/PaX Team's PAX_USERCOPY whitelisting code in the last public patch of grsecurity/PaX based on my understanding of the code. Changes or omissions from the original code are mine and don't reflect the original grsecurity/PaX code. Signed-off-by: David Windsor <dave@nullcore.net> [kees: adjust commit log, provide usage trace] Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: linux-ext4@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org>
2017-06-11 02:50:36 +00:00
offsetof(struct ext4_inode_info, i_data),
sizeof_field(struct ext4_inode_info, i_data),
init_once);
if (ext4_inode_cachep == NULL)
return -ENOMEM;
return 0;
}
static void destroy_inodecache(void)
{
/*
* Make sure all delayed rcu free inodes are flushed before we
* destroy cache.
*/
rcu_barrier();
kmem_cache_destroy(ext4_inode_cachep);
}
void ext4_clear_inode(struct inode *inode)
{
ext4_fc_del(inode);
invalidate_inode_buffers(inode);
clear_inode(inode);
ext4_discard_preallocations(inode);
ext4_es_remove_extent(inode, 0, EXT_MAX_BLOCKS);
dquot_drop(inode);
if (EXT4_I(inode)->jinode) {
jbd2_journal_release_jbd_inode(EXT4_JOURNAL(inode),
EXT4_I(inode)->jinode);
jbd2_free_inode(EXT4_I(inode)->jinode);
EXT4_I(inode)->jinode = NULL;
}
fscrypt_put_encryption_info(inode);
ext4: add basic fs-verity support Add most of fs-verity support to ext4. fs-verity is a filesystem feature that enables transparent integrity protection and authentication of read-only files. It uses a dm-verity like mechanism at the file level: a Merkle tree is used to verify any block in the file in log(filesize) time. It is implemented mainly by helper functions in fs/verity/. See Documentation/filesystems/fsverity.rst for the full documentation. This commit adds all of ext4 fs-verity support except for the actual data verification, including: - Adding a filesystem feature flag and an inode flag for fs-verity. - Implementing the fsverity_operations to support enabling verity on an inode and reading/writing the verity metadata. - Updating ->write_begin(), ->write_end(), and ->writepages() to support writing verity metadata pages. - Calling the fs-verity hooks for ->open(), ->setattr(), and ->ioctl(). ext4 stores the verity metadata (Merkle tree and fsverity_descriptor) past the end of the file, starting at the first 64K boundary beyond i_size. This approach works because (a) verity files are readonly, and (b) pages fully beyond i_size aren't visible to userspace but can be read/written internally by ext4 with only some relatively small changes to ext4. This approach avoids having to depend on the EA_INODE feature and on rearchitecturing ext4's xattr support to support paging multi-gigabyte xattrs into memory, and to support encrypting xattrs. Note that the verity metadata *must* be encrypted when the file is, since it contains hashes of the plaintext data. This patch incorporates work by Theodore Ts'o and Chandan Rajendra. Reviewed-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-07-22 16:26:24 +00:00
fsverity_cleanup_inode(inode);
}
static struct inode *ext4_nfs_get_inode(struct super_block *sb,
u64 ino, u32 generation)
{
struct inode *inode;
/*
* Currently we don't know the generation for parent directory, so
* a generation of 0 means "accept any"
*/
inode = ext4_iget(sb, ino, EXT4_IGET_HANDLE);
if (IS_ERR(inode))
return ERR_CAST(inode);
if (generation && inode->i_generation != generation) {
iput(inode);
return ERR_PTR(-ESTALE);
}
return inode;
}
static struct dentry *ext4_fh_to_dentry(struct super_block *sb, struct fid *fid,
int fh_len, int fh_type)
{
return generic_fh_to_dentry(sb, fid, fh_len, fh_type,
ext4_nfs_get_inode);
}
static struct dentry *ext4_fh_to_parent(struct super_block *sb, struct fid *fid,
int fh_len, int fh_type)
{
return generic_fh_to_parent(sb, fid, fh_len, fh_type,
ext4_nfs_get_inode);
}
static int ext4_nfs_commit_metadata(struct inode *inode)
{
struct writeback_control wbc = {
.sync_mode = WB_SYNC_ALL
};
trace_ext4_nfs_commit_metadata(inode);
return ext4_write_inode(inode, &wbc);
}
#ifdef CONFIG_QUOTA
static const char * const quotatypes[] = INITQFNAMES;
#define QTYPE2NAME(t) (quotatypes[t])
static int ext4_write_dquot(struct dquot *dquot);
static int ext4_acquire_dquot(struct dquot *dquot);
static int ext4_release_dquot(struct dquot *dquot);
static int ext4_mark_dquot_dirty(struct dquot *dquot);
static int ext4_write_info(struct super_block *sb, int type);
static int ext4_quota_on(struct super_block *sb, int type, int format_id,
const struct path *path);
static ssize_t ext4_quota_read(struct super_block *sb, int type, char *data,
size_t len, loff_t off);
static ssize_t ext4_quota_write(struct super_block *sb, int type,
const char *data, size_t len, loff_t off);
ext4: make quota as first class supported feature This patch adds support for quotas as a first class feature in ext4; which is to say, the quota files are stored in hidden inodes as file system metadata, instead of as separate files visible in the file system directory hierarchy. It is based on the proposal at: https://ext4.wiki.kernel.org/index.php/Design_For_1st_Class_Quota_in_Ext4 This patch introduces a new feature - EXT4_FEATURE_RO_COMPAT_QUOTA which, when turned on, enables quota accounting at mount time iteself. Also, the quota inodes are stored in two additional superblock fields. Some changes introduced by this patch that should be pointed out are: 1) Two new ext4-superblock fields - s_usr_quota_inum and s_grp_quota_inum for storing the quota inodes in use. 2) Default quota inodes are: inode#3 for tracking userquota and inode#4 for tracking group quota. The superblock fields can be set to use other inodes as well. 3) If the QUOTA feature and corresponding quota inodes are set in superblock, the quota usage tracking is turned on at mount time. On 'quotaon' ioctl, the quota limits enforcement is turned on. 'quotaoff' ioctl turns off only the limits enforcement in this case. 4) When QUOTA feature is in use, the quota mount options 'quota', 'usrquota', 'grpquota' are ignored by the kernel. 5) mke2fs or tune2fs can be used to set the QUOTA feature and initialize quota inodes. The default reserved inodes will not be visible to user as regular files. 6) The quota-tools will need to be modified to support hidden quota files on ext4. E2fsprogs will also include support for creating and fixing quota files. 7) Support is only for the new V2 quota file format. Tested-by: Jan Kara <jack@suse.cz> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Johann Lombardi <johann@whamcloud.com> Signed-off-by: Aditya Kali <adityakali@google.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-07-23 00:21:31 +00:00
static int ext4_quota_enable(struct super_block *sb, int type, int format_id,
unsigned int flags);
static struct dquot __rcu **ext4_get_dquots(struct inode *inode)
{
return EXT4_I(inode)->i_dquot;
}
static const struct dquot_operations ext4_quota_operations = {
.get_reserved_space = ext4_get_reserved_space,
.write_dquot = ext4_write_dquot,
.acquire_dquot = ext4_acquire_dquot,
.release_dquot = ext4_release_dquot,
.mark_dirty = ext4_mark_dquot_dirty,
.write_info = ext4_write_info,
.alloc_dquot = dquot_alloc,
.destroy_dquot = dquot_destroy,
.get_projid = ext4_get_projid,
.get_inode_usage = ext4_get_inode_usage,
.get_next_id = dquot_get_next_id,
};
static const struct quotactl_ops ext4_qctl_operations = {
.quota_on = ext4_quota_on,
.quota_off = ext4_quota_off,
.quota_sync = dquot_quota_sync,
.get_state = dquot_get_state,
.set_info = dquot_set_dqinfo,
.get_dqblk = dquot_get_dqblk,
.set_dqblk = dquot_set_dqblk,
.get_nextdqblk = dquot_get_next_dqblk,
};
#endif
static const struct super_operations ext4_sops = {
.alloc_inode = ext4_alloc_inode,
.free_inode = ext4_free_in_core_inode,
.destroy_inode = ext4_destroy_inode,
.write_inode = ext4_write_inode,
.dirty_inode = ext4_dirty_inode,
.drop_inode = ext4_drop_inode,
.evict_inode = ext4_evict_inode,
.put_super = ext4_put_super,
.sync_fs = ext4_sync_fs,
filesystem freeze: add error handling of write_super_lockfs/unlockfs Currently, ext3 in mainline Linux doesn't have the freeze feature which suspends write requests. So, we cannot take a backup which keeps the filesystem's consistency with the storage device's features (snapshot and replication) while it is mounted. In many case, a commercial filesystem (e.g. VxFS) has the freeze feature and it would be used to get the consistent backup. If Linux's standard filesystem ext3 has the freeze feature, we can do it without a commercial filesystem. So I have implemented the ioctls of the freeze feature. I think we can take the consistent backup with the following steps. 1. Freeze the filesystem with the freeze ioctl. 2. Separate the replication volume or create the snapshot with the storage device's feature. 3. Unfreeze the filesystem with the unfreeze ioctl. 4. Take the backup from the separated replication volume or the snapshot. This patch: VFS: Changed the type of write_super_lockfs and unlockfs from "void" to "int" so that they can return an error. Rename write_super_lockfs and unlockfs of the super block operation freeze_fs and unfreeze_fs to avoid a confusion. ext3, ext4, xfs, gfs2, jfs: Changed the type of write_super_lockfs and unlockfs from "void" to "int" so that write_super_lockfs returns an error if needed, and unlockfs always returns 0. reiserfs: Changed the type of write_super_lockfs and unlockfs from "void" to "int" so that they always return 0 (success) to keep a current behavior. Signed-off-by: Takashi Sato <t-sato@yk.jp.nec.com> Signed-off-by: Masayuki Hamaguchi <m-hamaguchi@ys.jp.nec.com> Cc: <xfs-masters@oss.sgi.com> Cc: <linux-ext4@vger.kernel.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Dave Kleikamp <shaggy@austin.ibm.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Alasdair G Kergon <agk@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-10 00:40:58 +00:00
.freeze_fs = ext4_freeze,
.unfreeze_fs = ext4_unfreeze,
.statfs = ext4_statfs,
.show_options = ext4_show_options,
.shutdown = ext4_shutdown,
#ifdef CONFIG_QUOTA
.quota_read = ext4_quota_read,
.quota_write = ext4_quota_write,
.get_dquots = ext4_get_dquots,
#endif
};
static const struct export_operations ext4_export_ops = {
.encode_fh = generic_encode_ino32_fh,
.fh_to_dentry = ext4_fh_to_dentry,
.fh_to_parent = ext4_fh_to_parent,
.get_parent = ext4_get_parent,
.commit_metadata = ext4_nfs_commit_metadata,
};
enum {
Opt_bsd_df, Opt_minix_df, Opt_grpid, Opt_nogrpid,
Opt_resgid, Opt_resuid, Opt_sb,
Opt_nouid32, Opt_debug, Opt_removed,
Opt_user_xattr, Opt_acl,
Opt_auto_da_alloc, Opt_noauto_da_alloc, Opt_noload,
ext4: allow specifying external journal by pathname mount option It's always been a hassle that if an external journal's device number changes, the filesystem won't mount. And since boot-time enumeration can change, device number changes aren't unusual. The current mechanism to update the journal location is by passing in a mount option w/ a new devnum, but that's a hassle; it's a manual approach, fixing things after the fact. Adding a mount option, "-o journal_path=/dev/$DEVICE" would help, since then we can do i.e. # mount -o journal_path=/dev/disk/by-label/$JOURNAL_LABEL ... and it'll mount even if the devnum has changed, as shown here: # losetup /dev/loop0 journalfile # mke2fs -L mylabel-journal -O journal_dev /dev/loop0 # mkfs.ext4 -L mylabel -J device=/dev/loop0 /dev/sdb1 Change the journal device number: # losetup -d /dev/loop0 # losetup /dev/loop1 journalfile And today it will fail: # mount /dev/sdb1 /mnt/test mount: wrong fs type, bad option, bad superblock on /dev/sdb1, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so # dmesg | tail -n 1 [17343.240702] EXT4-fs (sdb1): error: couldn't read superblock of external journal But with this new mount option, we can specify the new path: # mount -o journal_path=/dev/loop1 /dev/sdb1 /mnt/test # (which does update the encoded device number, incidentally): # umount /dev/sdb1 # dumpe2fs -h /dev/sdb1 | grep "Journal device" dumpe2fs 1.41.12 (17-May-2010) Journal device: 0x0701 But best of all we can just always mount by journal-path, and it'll always work: # mount -o journal_path=/dev/disk/by-label/mylabel-journal /dev/sdb1 /mnt/test # So the journal_path option can be specified in fstab, and as long as the disk is available somewhere, and findable by label (or by UUID), we can mount. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
2013-08-28 23:05:07 +00:00
Opt_commit, Opt_min_batch_time, Opt_max_batch_time, Opt_journal_dev,
Opt_journal_path, Opt_journal_checksum, Opt_journal_async_commit,
Opt_abort, Opt_data_journal, Opt_data_ordered, Opt_data_writeback,
Opt_data_err_abort, Opt_data_err_ignore, Opt_test_dummy_encryption,
Opt_inlinecrypt,
Opt_usrjquota, Opt_grpjquota, Opt_quota,
Opt_noquota, Opt_barrier, Opt_nobarrier, Opt_err,
Opt_usrquota, Opt_grpquota, Opt_prjquota,
Opt_dax, Opt_dax_always, Opt_dax_inode, Opt_dax_never,
Opt_stripe, Opt_delalloc, Opt_nodelalloc, Opt_warn_on_error,
Opt_nowarn_on_error, Opt_mblk_io_submit, Opt_debug_want_extra_isize,
Opt_nomblk_io_submit, Opt_block_validity, Opt_noblock_validity,
Opt_inode_readahead_blks, Opt_journal_ioprio,
Opt_dioread_nolock, Opt_dioread_lock,
Opt_discard, Opt_nodiscard, Opt_init_itable, Opt_noinit_itable,
Opt_max_dir_size_kb, Opt_nojournal_checksum, Opt_nombcache,
Opt_no_prefetch_block_bitmaps, Opt_mb_optimize_scan,
Opt_errors, Opt_data, Opt_data_err, Opt_jqfmt, Opt_dax_type,
#ifdef CONFIG_EXT4_DEBUG
Opt_fc_debug_max_replay, Opt_fc_debug_force
#endif
};
static const struct constant_table ext4_param_errors[] = {
{"continue", EXT4_MOUNT_ERRORS_CONT},
{"panic", EXT4_MOUNT_ERRORS_PANIC},
{"remount-ro", EXT4_MOUNT_ERRORS_RO},
{}
};
static const struct constant_table ext4_param_data[] = {
{"journal", EXT4_MOUNT_JOURNAL_DATA},
{"ordered", EXT4_MOUNT_ORDERED_DATA},
{"writeback", EXT4_MOUNT_WRITEBACK_DATA},
{}
};
static const struct constant_table ext4_param_data_err[] = {
{"abort", Opt_data_err_abort},
{"ignore", Opt_data_err_ignore},
{}
};
static const struct constant_table ext4_param_jqfmt[] = {
{"vfsold", QFMT_VFS_OLD},
{"vfsv0", QFMT_VFS_V0},
{"vfsv1", QFMT_VFS_V1},
{}
};
static const struct constant_table ext4_param_dax[] = {
{"always", Opt_dax_always},
{"inode", Opt_dax_inode},
{"never", Opt_dax_never},
{}
};
/* String parameter that allows empty argument */
#define fsparam_string_empty(NAME, OPT) \
__fsparam(fs_param_is_string, NAME, OPT, fs_param_can_be_empty, NULL)
/*
* Mount option specification
* We don't use fsparam_flag_no because of the way we set the
* options and the way we show them in _ext4_show_options(). To
* keep the changes to a minimum, let's keep the negative options
* separate for now.
*/
static const struct fs_parameter_spec ext4_param_specs[] = {
fsparam_flag ("bsddf", Opt_bsd_df),
fsparam_flag ("minixdf", Opt_minix_df),
fsparam_flag ("grpid", Opt_grpid),
fsparam_flag ("bsdgroups", Opt_grpid),
fsparam_flag ("nogrpid", Opt_nogrpid),
fsparam_flag ("sysvgroups", Opt_nogrpid),
fsparam_u32 ("resgid", Opt_resgid),
fsparam_u32 ("resuid", Opt_resuid),
fsparam_u32 ("sb", Opt_sb),
fsparam_enum ("errors", Opt_errors, ext4_param_errors),
fsparam_flag ("nouid32", Opt_nouid32),
fsparam_flag ("debug", Opt_debug),
fsparam_flag ("oldalloc", Opt_removed),
fsparam_flag ("orlov", Opt_removed),
fsparam_flag ("user_xattr", Opt_user_xattr),
fsparam_flag ("acl", Opt_acl),
fsparam_flag ("norecovery", Opt_noload),
fsparam_flag ("noload", Opt_noload),
fsparam_flag ("bh", Opt_removed),
fsparam_flag ("nobh", Opt_removed),
fsparam_u32 ("commit", Opt_commit),
fsparam_u32 ("min_batch_time", Opt_min_batch_time),
fsparam_u32 ("max_batch_time", Opt_max_batch_time),
fsparam_u32 ("journal_dev", Opt_journal_dev),
fsparam_bdev ("journal_path", Opt_journal_path),
fsparam_flag ("journal_checksum", Opt_journal_checksum),
fsparam_flag ("nojournal_checksum", Opt_nojournal_checksum),
fsparam_flag ("journal_async_commit",Opt_journal_async_commit),
fsparam_flag ("abort", Opt_abort),
fsparam_enum ("data", Opt_data, ext4_param_data),
fsparam_enum ("data_err", Opt_data_err,
ext4_param_data_err),
fsparam_string_empty
("usrjquota", Opt_usrjquota),
fsparam_string_empty
("grpjquota", Opt_grpjquota),
fsparam_enum ("jqfmt", Opt_jqfmt, ext4_param_jqfmt),
fsparam_flag ("grpquota", Opt_grpquota),
fsparam_flag ("quota", Opt_quota),
fsparam_flag ("noquota", Opt_noquota),
fsparam_flag ("usrquota", Opt_usrquota),
fsparam_flag ("prjquota", Opt_prjquota),
fsparam_flag ("barrier", Opt_barrier),
fsparam_u32 ("barrier", Opt_barrier),
fsparam_flag ("nobarrier", Opt_nobarrier),
fsparam_flag ("i_version", Opt_removed),
fsparam_flag ("dax", Opt_dax),
fsparam_enum ("dax", Opt_dax_type, ext4_param_dax),
fsparam_u32 ("stripe", Opt_stripe),
fsparam_flag ("delalloc", Opt_delalloc),
fsparam_flag ("nodelalloc", Opt_nodelalloc),
fsparam_flag ("warn_on_error", Opt_warn_on_error),
fsparam_flag ("nowarn_on_error", Opt_nowarn_on_error),
fsparam_u32 ("debug_want_extra_isize",
Opt_debug_want_extra_isize),
fsparam_flag ("mblk_io_submit", Opt_removed),
fsparam_flag ("nomblk_io_submit", Opt_removed),
fsparam_flag ("block_validity", Opt_block_validity),
fsparam_flag ("noblock_validity", Opt_noblock_validity),
fsparam_u32 ("inode_readahead_blks",
Opt_inode_readahead_blks),
fsparam_u32 ("journal_ioprio", Opt_journal_ioprio),
fsparam_u32 ("auto_da_alloc", Opt_auto_da_alloc),
fsparam_flag ("auto_da_alloc", Opt_auto_da_alloc),
fsparam_flag ("noauto_da_alloc", Opt_noauto_da_alloc),
fsparam_flag ("dioread_nolock", Opt_dioread_nolock),
fsparam_flag ("nodioread_nolock", Opt_dioread_lock),
fsparam_flag ("dioread_lock", Opt_dioread_lock),
fsparam_flag ("discard", Opt_discard),
fsparam_flag ("nodiscard", Opt_nodiscard),
fsparam_u32 ("init_itable", Opt_init_itable),
fsparam_flag ("init_itable", Opt_init_itable),
fsparam_flag ("noinit_itable", Opt_noinit_itable),
#ifdef CONFIG_EXT4_DEBUG
fsparam_flag ("fc_debug_force", Opt_fc_debug_force),
fsparam_u32 ("fc_debug_max_replay", Opt_fc_debug_max_replay),
#endif
fsparam_u32 ("max_dir_size_kb", Opt_max_dir_size_kb),
fsparam_flag ("test_dummy_encryption",
Opt_test_dummy_encryption),
fsparam_string ("test_dummy_encryption",
Opt_test_dummy_encryption),
fsparam_flag ("inlinecrypt", Opt_inlinecrypt),
fsparam_flag ("nombcache", Opt_nombcache),
fsparam_flag ("no_mbcache", Opt_nombcache), /* for backward compatibility */
fsparam_flag ("prefetch_block_bitmaps",
Opt_removed),
fsparam_flag ("no_prefetch_block_bitmaps",
Opt_no_prefetch_block_bitmaps),
fsparam_s32 ("mb_optimize_scan", Opt_mb_optimize_scan),
fsparam_string ("check", Opt_removed), /* mount option from ext2/3 */
fsparam_flag ("nocheck", Opt_removed), /* mount option from ext2/3 */
fsparam_flag ("reservation", Opt_removed), /* mount option from ext2/3 */
fsparam_flag ("noreservation", Opt_removed), /* mount option from ext2/3 */
fsparam_u32 ("journal", Opt_removed), /* mount option from ext2/3 */
{}
};
#define DEFAULT_JOURNAL_IOPRIO (IOPRIO_PRIO_VALUE(IOPRIO_CLASS_BE, 3))
ext4: improve cr 0 / cr 1 group scanning Instead of traversing through groups linearly, scan groups in specific orders at cr 0 and cr 1. At cr 0, we want to find groups that have the largest free order >= the order of the request. So, with this patch, we maintain lists for each possible order and insert each group into a list based on the largest free order in its buddy bitmap. During cr 0 allocation, we traverse these lists in the increasing order of largest free orders. This allows us to find a group with the best available cr 0 match in constant time. If nothing can be found, we fallback to cr 1 immediately. At CR1, the story is slightly different. We want to traverse in the order of increasing average fragment size. For CR1, we maintain a rb tree of groupinfos which is sorted by average fragment size. Instead of traversing linearly, at CR1, we traverse in the order of increasing average fragment size, starting at the most optimal group. This brings down cr 1 search complexity to log(num groups). For cr >= 2, we just perform the linear search as before. Also, in case of lock contention, we intermittently fallback to linear search even in CR 0 and CR 1 cases. This allows us to proceed during the allocation path even in case of high contention. There is an opportunity to do optimization at CR2 too. That's because at CR2 we only consider groups where bb_free counter (number of free blocks) is greater than the request extent size. That's left as future work. All the changes introduced in this patch are protected under a new mount option "mb_optimize_scan". With this patchset, following experiment was performed: Created a highly fragmented disk of size 65TB. The disk had no contiguous 2M regions. Following command was run consecutively for 3 times: time dd if=/dev/urandom of=file bs=2M count=10 Here are the results with and without cr 0/1 optimizations introduced in this patch: |---------+------------------------------+---------------------------| | | Without CR 0/1 Optimizations | With CR 0/1 Optimizations | |---------+------------------------------+---------------------------| | 1st run | 5m1.871s | 2m47.642s | | 2nd run | 2m28.390s | 0m0.611s | | 3rd run | 2m26.530s | 0m1.255s | |---------+------------------------------+---------------------------| Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com> Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Andreas Dilger <adilger@dilger.ca> Link: https://lore.kernel.org/r/20210401172129.189766-6-harshadshirwadkar@gmail.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2021-04-01 17:21:27 +00:00
#define MOPT_SET 0x0001
#define MOPT_CLEAR 0x0002
#define MOPT_NOSUPPORT 0x0004
#define MOPT_EXPLICIT 0x0008
#ifdef CONFIG_QUOTA
#define MOPT_Q 0
#define MOPT_QFMT 0x0010
#else
#define MOPT_Q MOPT_NOSUPPORT
#define MOPT_QFMT MOPT_NOSUPPORT
#endif
#define MOPT_NO_EXT2 0x0020
#define MOPT_NO_EXT3 0x0040
#define MOPT_EXT4_ONLY (MOPT_NO_EXT2 | MOPT_NO_EXT3)
#define MOPT_SKIP 0x0080
#define MOPT_2 0x0100
static const struct mount_opts {
int token;
int mount_opt;
int flags;
} ext4_mount_opts[] = {
{Opt_minix_df, EXT4_MOUNT_MINIX_DF, MOPT_SET},
{Opt_bsd_df, EXT4_MOUNT_MINIX_DF, MOPT_CLEAR},
{Opt_grpid, EXT4_MOUNT_GRPID, MOPT_SET},
{Opt_nogrpid, EXT4_MOUNT_GRPID, MOPT_CLEAR},
{Opt_block_validity, EXT4_MOUNT_BLOCK_VALIDITY, MOPT_SET},
{Opt_noblock_validity, EXT4_MOUNT_BLOCK_VALIDITY, MOPT_CLEAR},
{Opt_dioread_nolock, EXT4_MOUNT_DIOREAD_NOLOCK,
MOPT_EXT4_ONLY | MOPT_SET},
{Opt_dioread_lock, EXT4_MOUNT_DIOREAD_NOLOCK,
MOPT_EXT4_ONLY | MOPT_CLEAR},
{Opt_discard, EXT4_MOUNT_DISCARD, MOPT_SET},
{Opt_nodiscard, EXT4_MOUNT_DISCARD, MOPT_CLEAR},
{Opt_delalloc, EXT4_MOUNT_DELALLOC,
MOPT_EXT4_ONLY | MOPT_SET | MOPT_EXPLICIT},
{Opt_nodelalloc, EXT4_MOUNT_DELALLOC,
MOPT_EXT4_ONLY | MOPT_CLEAR},
{Opt_warn_on_error, EXT4_MOUNT_WARN_ON_ERROR, MOPT_SET},
{Opt_nowarn_on_error, EXT4_MOUNT_WARN_ON_ERROR, MOPT_CLEAR},
{Opt_commit, 0, MOPT_NO_EXT2},
{Opt_nojournal_checksum, EXT4_MOUNT_JOURNAL_CHECKSUM,
MOPT_EXT4_ONLY | MOPT_CLEAR},
{Opt_journal_checksum, EXT4_MOUNT_JOURNAL_CHECKSUM,
MOPT_EXT4_ONLY | MOPT_SET | MOPT_EXPLICIT},
{Opt_journal_async_commit, (EXT4_MOUNT_JOURNAL_ASYNC_COMMIT |
EXT4_MOUNT_JOURNAL_CHECKSUM),
MOPT_EXT4_ONLY | MOPT_SET | MOPT_EXPLICIT},
{Opt_noload, EXT4_MOUNT_NOLOAD, MOPT_NO_EXT2 | MOPT_SET},
{Opt_data_err, EXT4_MOUNT_DATA_ERR_ABORT, MOPT_NO_EXT2},
{Opt_barrier, EXT4_MOUNT_BARRIER, MOPT_SET},
{Opt_nobarrier, EXT4_MOUNT_BARRIER, MOPT_CLEAR},
{Opt_noauto_da_alloc, EXT4_MOUNT_NO_AUTO_DA_ALLOC, MOPT_SET},
{Opt_auto_da_alloc, EXT4_MOUNT_NO_AUTO_DA_ALLOC, MOPT_CLEAR},
{Opt_noinit_itable, EXT4_MOUNT_INIT_INODE_TABLE, MOPT_CLEAR},
{Opt_dax_type, 0, MOPT_EXT4_ONLY},
{Opt_journal_dev, 0, MOPT_NO_EXT2},
{Opt_journal_path, 0, MOPT_NO_EXT2},
{Opt_journal_ioprio, 0, MOPT_NO_EXT2},
{Opt_data, 0, MOPT_NO_EXT2},
{Opt_user_xattr, EXT4_MOUNT_XATTR_USER, MOPT_SET},
#ifdef CONFIG_EXT4_FS_POSIX_ACL
{Opt_acl, EXT4_MOUNT_POSIX_ACL, MOPT_SET},
#else
{Opt_acl, 0, MOPT_NOSUPPORT},
#endif
{Opt_nouid32, EXT4_MOUNT_NO_UID32, MOPT_SET},
{Opt_debug, EXT4_MOUNT_DEBUG, MOPT_SET},
{Opt_quota, EXT4_MOUNT_QUOTA | EXT4_MOUNT_USRQUOTA, MOPT_SET | MOPT_Q},
{Opt_usrquota, EXT4_MOUNT_QUOTA | EXT4_MOUNT_USRQUOTA,
MOPT_SET | MOPT_Q},
{Opt_grpquota, EXT4_MOUNT_QUOTA | EXT4_MOUNT_GRPQUOTA,
MOPT_SET | MOPT_Q},
{Opt_prjquota, EXT4_MOUNT_QUOTA | EXT4_MOUNT_PRJQUOTA,
MOPT_SET | MOPT_Q},
{Opt_noquota, (EXT4_MOUNT_QUOTA | EXT4_MOUNT_USRQUOTA |
EXT4_MOUNT_GRPQUOTA | EXT4_MOUNT_PRJQUOTA),
MOPT_CLEAR | MOPT_Q},
{Opt_usrjquota, 0, MOPT_Q},
{Opt_grpjquota, 0, MOPT_Q},
{Opt_jqfmt, 0, MOPT_QFMT},
{Opt_nombcache, EXT4_MOUNT_NO_MBCACHE, MOPT_SET},
{Opt_no_prefetch_block_bitmaps, EXT4_MOUNT_NO_PREFETCH_BLOCK_BITMAPS,
MOPT_SET},
#ifdef CONFIG_EXT4_DEBUG
{Opt_fc_debug_force, EXT4_MOUNT2_JOURNAL_FAST_COMMIT,
MOPT_SET | MOPT_2 | MOPT_EXT4_ONLY},
#endif
{Opt_abort, EXT4_MOUNT2_ABORT, MOPT_SET | MOPT_2},
{Opt_err, 0, 0}
};
#if IS_ENABLED(CONFIG_UNICODE)
static const struct ext4_sb_encodings {
__u16 magic;
char *name;
unsigned int version;
} ext4_sb_encoding_map[] = {
{EXT4_ENC_UTF8_12_1, "utf8", UNICODE_AGE(12, 1, 0)},
};
static const struct ext4_sb_encodings *
ext4_sb_read_encoding(const struct ext4_super_block *es)
{
__u16 magic = le16_to_cpu(es->s_encoding);
int i;
for (i = 0; i < ARRAY_SIZE(ext4_sb_encoding_map); i++)
if (magic == ext4_sb_encoding_map[i].magic)
return &ext4_sb_encoding_map[i];
return NULL;
}
#endif
#define EXT4_SPEC_JQUOTA (1 << 0)
#define EXT4_SPEC_JQFMT (1 << 1)
#define EXT4_SPEC_DATAJ (1 << 2)
#define EXT4_SPEC_SB_BLOCK (1 << 3)
#define EXT4_SPEC_JOURNAL_DEV (1 << 4)
#define EXT4_SPEC_JOURNAL_IOPRIO (1 << 5)
#define EXT4_SPEC_s_want_extra_isize (1 << 7)
#define EXT4_SPEC_s_max_batch_time (1 << 8)
#define EXT4_SPEC_s_min_batch_time (1 << 9)
#define EXT4_SPEC_s_inode_readahead_blks (1 << 10)
#define EXT4_SPEC_s_li_wait_mult (1 << 11)
#define EXT4_SPEC_s_max_dir_size_kb (1 << 12)
#define EXT4_SPEC_s_stripe (1 << 13)
#define EXT4_SPEC_s_resuid (1 << 14)
#define EXT4_SPEC_s_resgid (1 << 15)
#define EXT4_SPEC_s_commit_interval (1 << 16)
#define EXT4_SPEC_s_fc_debug_max_replay (1 << 17)
ext4: Completely separate options parsing and sb setup The new mount api separates option parsing and super block setup into two distinct steps and so we need to separate the options parsing out of the ext4_fill_super() and ext4_remount(). In order to achieve this we have to create new ext4_fill_super() and ext4_remount() functions which will serve its purpose only until we actually do convert to the new api (as such they are only temporary for this patch series) and move the option parsing out of the old function which will now be renamed to __ext4_fill_super() and __ext4_remount(). There is a small complication in the fact that while the mount option parsing is going to happen before we get to __ext4_fill_super(), the mount options stored in the super block itself needs to be applied first, before the user specified mount options. So with this patch we're going through the following sequence: - parse user provided options (including sb block) - initialize sbi and store s_sb_block if provided - in __ext4_fill_super() - read the super block - parse and apply options specified in s_mount_opts - check and apply user provided options stored in ctx - continue with the regular ext4_fill_super operation It's not exactly the most elegant solution, but if we still want to support s_mount_opts we have to do it in this order. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Link: https://lore.kernel.org/r/20211027141857.33657-10-lczerner@redhat.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2021-10-27 14:18:53 +00:00
#define EXT4_SPEC_s_sb_block (1 << 18)
#define EXT4_SPEC_mb_optimize_scan (1 << 19)
struct ext4_fs_context {
char *s_qf_names[EXT4_MAXQUOTAS];
struct fscrypt_dummy_policy dummy_enc_policy;
int s_jquota_fmt; /* Format of quota to use */
#ifdef CONFIG_EXT4_DEBUG
int s_fc_debug_max_replay;
#endif
unsigned short qname_spec;
unsigned long vals_s_flags; /* Bits to set in s_flags */
unsigned long mask_s_flags; /* Bits changed in s_flags */
unsigned long journal_devnum;
unsigned long s_commit_interval;
unsigned long s_stripe;
unsigned int s_inode_readahead_blks;
unsigned int s_want_extra_isize;
unsigned int s_li_wait_mult;
unsigned int s_max_dir_size_kb;
unsigned int journal_ioprio;
unsigned int vals_s_mount_opt;
unsigned int mask_s_mount_opt;
unsigned int vals_s_mount_opt2;
unsigned int mask_s_mount_opt2;
unsigned int opt_flags; /* MOPT flags */
unsigned int spec;
u32 s_max_batch_time;
u32 s_min_batch_time;
kuid_t s_resuid;
kgid_t s_resgid;
ext4: Completely separate options parsing and sb setup The new mount api separates option parsing and super block setup into two distinct steps and so we need to separate the options parsing out of the ext4_fill_super() and ext4_remount(). In order to achieve this we have to create new ext4_fill_super() and ext4_remount() functions which will serve its purpose only until we actually do convert to the new api (as such they are only temporary for this patch series) and move the option parsing out of the old function which will now be renamed to __ext4_fill_super() and __ext4_remount(). There is a small complication in the fact that while the mount option parsing is going to happen before we get to __ext4_fill_super(), the mount options stored in the super block itself needs to be applied first, before the user specified mount options. So with this patch we're going through the following sequence: - parse user provided options (including sb block) - initialize sbi and store s_sb_block if provided - in __ext4_fill_super() - read the super block - parse and apply options specified in s_mount_opts - check and apply user provided options stored in ctx - continue with the regular ext4_fill_super operation It's not exactly the most elegant solution, but if we still want to support s_mount_opts we have to do it in this order. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Link: https://lore.kernel.org/r/20211027141857.33657-10-lczerner@redhat.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2021-10-27 14:18:53 +00:00
ext4_fsblk_t s_sb_block;
};
static void ext4_fc_free(struct fs_context *fc)
{
struct ext4_fs_context *ctx = fc->fs_private;
int i;
if (!ctx)
return;
for (i = 0; i < EXT4_MAXQUOTAS; i++)
kfree(ctx->s_qf_names[i]);
fscrypt_free_dummy_policy(&ctx->dummy_enc_policy);
kfree(ctx);
}
int ext4_init_fs_context(struct fs_context *fc)
{
struct ext4_fs_context *ctx;
ctx = kzalloc(sizeof(struct ext4_fs_context), GFP_KERNEL);
if (!ctx)
return -ENOMEM;
fc->fs_private = ctx;
fc->ops = &ext4_context_ops;
return 0;
}
#ifdef CONFIG_QUOTA
/*
* Note the name of the specified quota file.
*/
static int note_qf_name(struct fs_context *fc, int qtype,
struct fs_parameter *param)
{
struct ext4_fs_context *ctx = fc->fs_private;
char *qname;
if (param->size < 1) {
ext4_msg(NULL, KERN_ERR, "Missing quota name");
return -EINVAL;
}
if (strchr(param->string, '/')) {
ext4_msg(NULL, KERN_ERR,
"quotafile must be on filesystem root");
return -EINVAL;
}
if (ctx->s_qf_names[qtype]) {
if (strcmp(ctx->s_qf_names[qtype], param->string) != 0) {
ext4_msg(NULL, KERN_ERR,
"%s quota file already specified",
QTYPE2NAME(qtype));
return -EINVAL;
}
return 0;
}
qname = kmemdup_nul(param->string, param->size, GFP_KERNEL);
if (!qname) {
ext4_msg(NULL, KERN_ERR,
"Not enough memory for storing quotafile name");
return -ENOMEM;
}
ctx->s_qf_names[qtype] = qname;
ctx->qname_spec |= 1 << qtype;
ctx->spec |= EXT4_SPEC_JQUOTA;
return 0;
}
/*
* Clear the name of the specified quota file.
*/
static int unnote_qf_name(struct fs_context *fc, int qtype)
{
struct ext4_fs_context *ctx = fc->fs_private;
kfree(ctx->s_qf_names[qtype]);
ctx->s_qf_names[qtype] = NULL;
ctx->qname_spec |= 1 << qtype;
ctx->spec |= EXT4_SPEC_JQUOTA;
return 0;
}
#endif
static int ext4_parse_test_dummy_encryption(const struct fs_parameter *param,
struct ext4_fs_context *ctx)
{
int err;
if (!IS_ENABLED(CONFIG_FS_ENCRYPTION)) {
ext4_msg(NULL, KERN_WARNING,
"test_dummy_encryption option not supported");
return -EINVAL;
}
err = fscrypt_parse_test_dummy_encryption(param,
&ctx->dummy_enc_policy);
if (err == -EINVAL) {
ext4_msg(NULL, KERN_WARNING,
"Value of option \"%s\" is unrecognized", param->key);
} else if (err == -EEXIST) {
ext4_msg(NULL, KERN_WARNING,
"Conflicting test_dummy_encryption options");
return -EINVAL;
}
return err;
}
#define EXT4_SET_CTX(name) \
static inline void ctx_set_##name(struct ext4_fs_context *ctx, \
unsigned long flag) \
{ \
ctx->mask_s_##name |= flag; \
ctx->vals_s_##name |= flag; \
}
#define EXT4_CLEAR_CTX(name) \
static inline void ctx_clear_##name(struct ext4_fs_context *ctx, \
unsigned long flag) \
{ \
ctx->mask_s_##name |= flag; \
ctx->vals_s_##name &= ~flag; \
}
#define EXT4_TEST_CTX(name) \
static inline unsigned long \
ctx_test_##name(struct ext4_fs_context *ctx, unsigned long flag) \
{ \
return (ctx->vals_s_##name & flag); \
}
EXT4_SET_CTX(flags); /* set only */
EXT4_SET_CTX(mount_opt);
EXT4_CLEAR_CTX(mount_opt);
EXT4_TEST_CTX(mount_opt);
EXT4_SET_CTX(mount_opt2);
EXT4_CLEAR_CTX(mount_opt2);
EXT4_TEST_CTX(mount_opt2);
static int ext4_parse_param(struct fs_context *fc, struct fs_parameter *param)
{
struct ext4_fs_context *ctx = fc->fs_private;
struct fs_parse_result result;
const struct mount_opts *m;
int is_remount;
kuid_t uid;
kgid_t gid;
int token;
token = fs_parse(fc, ext4_param_specs, param, &result);
if (token < 0)
return token;
is_remount = fc->purpose == FS_CONTEXT_FOR_RECONFIGURE;
for (m = ext4_mount_opts; m->token != Opt_err; m++)
if (token == m->token)
break;
ctx->opt_flags |= m->flags;
if (m->flags & MOPT_EXPLICIT) {
if (m->mount_opt & EXT4_MOUNT_DELALLOC) {
ctx_set_mount_opt2(ctx, EXT4_MOUNT2_EXPLICIT_DELALLOC);
} else if (m->mount_opt & EXT4_MOUNT_JOURNAL_CHECKSUM) {
ctx_set_mount_opt2(ctx,
EXT4_MOUNT2_EXPLICIT_JOURNAL_CHECKSUM);
} else
return -EINVAL;
}
if (m->flags & MOPT_NOSUPPORT) {
ext4_msg(NULL, KERN_ERR, "%s option not supported",
param->key);
return 0;
}
switch (token) {
#ifdef CONFIG_QUOTA
case Opt_usrjquota:
if (!*param->string)
return unnote_qf_name(fc, USRQUOTA);
else
return note_qf_name(fc, USRQUOTA, param);
case Opt_grpjquota:
if (!*param->string)
return unnote_qf_name(fc, GRPQUOTA);
else
return note_qf_name(fc, GRPQUOTA, param);
#endif
case Opt_sb:
ext4: Completely separate options parsing and sb setup The new mount api separates option parsing and super block setup into two distinct steps and so we need to separate the options parsing out of the ext4_fill_super() and ext4_remount(). In order to achieve this we have to create new ext4_fill_super() and ext4_remount() functions which will serve its purpose only until we actually do convert to the new api (as such they are only temporary for this patch series) and move the option parsing out of the old function which will now be renamed to __ext4_fill_super() and __ext4_remount(). There is a small complication in the fact that while the mount option parsing is going to happen before we get to __ext4_fill_super(), the mount options stored in the super block itself needs to be applied first, before the user specified mount options. So with this patch we're going through the following sequence: - parse user provided options (including sb block) - initialize sbi and store s_sb_block if provided - in __ext4_fill_super() - read the super block - parse and apply options specified in s_mount_opts - check and apply user provided options stored in ctx - continue with the regular ext4_fill_super operation It's not exactly the most elegant solution, but if we still want to support s_mount_opts we have to do it in this order. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Link: https://lore.kernel.org/r/20211027141857.33657-10-lczerner@redhat.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2021-10-27 14:18:53 +00:00
if (fc->purpose == FS_CONTEXT_FOR_RECONFIGURE) {
ext4_msg(NULL, KERN_WARNING,
"Ignoring %s option on remount", param->key);
} else {
ctx->s_sb_block = result.uint_32;
ctx->spec |= EXT4_SPEC_s_sb_block;
}
return 0;
case Opt_removed:
ext4_msg(NULL, KERN_WARNING, "Ignoring removed %s option",
param->key);
return 0;
case Opt_inlinecrypt:
#ifdef CONFIG_FS_ENCRYPTION_INLINE_CRYPT
ctx_set_flags(ctx, SB_INLINECRYPT);
#else
ext4_msg(NULL, KERN_ERR, "inline encryption not supported");
#endif
return 0;
case Opt_errors:
ctx_clear_mount_opt(ctx, EXT4_MOUNT_ERRORS_MASK);
ctx_set_mount_opt(ctx, result.uint_32);
return 0;
#ifdef CONFIG_QUOTA
case Opt_jqfmt:
ctx->s_jquota_fmt = result.uint_32;
ctx->spec |= EXT4_SPEC_JQFMT;
return 0;
#endif
case Opt_data:
ctx_clear_mount_opt(ctx, EXT4_MOUNT_DATA_FLAGS);
ctx_set_mount_opt(ctx, result.uint_32);
ctx->spec |= EXT4_SPEC_DATAJ;
return 0;
case Opt_commit:
if (result.uint_32 == 0)
result.uint_32 = JBD2_DEFAULT_MAX_COMMIT_AGE;
else if (result.uint_32 > INT_MAX / HZ) {
ext4_msg(NULL, KERN_ERR,
"Invalid commit interval %d, "
"must be smaller than %d",
result.uint_32, INT_MAX / HZ);
return -EINVAL;
}
ctx->s_commit_interval = HZ * result.uint_32;
ctx->spec |= EXT4_SPEC_s_commit_interval;
return 0;
case Opt_debug_want_extra_isize:
if ((result.uint_32 & 1) || (result.uint_32 < 4)) {
ext4_msg(NULL, KERN_ERR,
"Invalid want_extra_isize %d", result.uint_32);
return -EINVAL;
}
ctx->s_want_extra_isize = result.uint_32;
ctx->spec |= EXT4_SPEC_s_want_extra_isize;
return 0;
case Opt_max_batch_time:
ctx->s_max_batch_time = result.uint_32;
ctx->spec |= EXT4_SPEC_s_max_batch_time;
return 0;
case Opt_min_batch_time:
ctx->s_min_batch_time = result.uint_32;
ctx->spec |= EXT4_SPEC_s_min_batch_time;
return 0;
case Opt_inode_readahead_blks:
if (result.uint_32 &&
(result.uint_32 > (1 << 30) ||
!is_power_of_2(result.uint_32))) {
ext4_msg(NULL, KERN_ERR,
"EXT4-fs: inode_readahead_blks must be "
"0 or a power of 2 smaller than 2^31");
return -EINVAL;
}
ctx->s_inode_readahead_blks = result.uint_32;
ctx->spec |= EXT4_SPEC_s_inode_readahead_blks;
return 0;
case Opt_init_itable:
ctx_set_mount_opt(ctx, EXT4_MOUNT_INIT_INODE_TABLE);
ctx->s_li_wait_mult = EXT4_DEF_LI_WAIT_MULT;
if (param->type == fs_value_is_string)
ctx->s_li_wait_mult = result.uint_32;
ctx->spec |= EXT4_SPEC_s_li_wait_mult;
return 0;
case Opt_max_dir_size_kb:
ctx->s_max_dir_size_kb = result.uint_32;
ctx->spec |= EXT4_SPEC_s_max_dir_size_kb;
return 0;
#ifdef CONFIG_EXT4_DEBUG
case Opt_fc_debug_max_replay:
ctx->s_fc_debug_max_replay = result.uint_32;
ctx->spec |= EXT4_SPEC_s_fc_debug_max_replay;
return 0;
#endif
case Opt_stripe:
ctx->s_stripe = result.uint_32;
ctx->spec |= EXT4_SPEC_s_stripe;
return 0;
case Opt_resuid:
uid = make_kuid(current_user_ns(), result.uint_32);
if (!uid_valid(uid)) {
ext4_msg(NULL, KERN_ERR, "Invalid uid value %d",
result.uint_32);
return -EINVAL;
}
ctx->s_resuid = uid;
ctx->spec |= EXT4_SPEC_s_resuid;
return 0;
case Opt_resgid:
gid = make_kgid(current_user_ns(), result.uint_32);
if (!gid_valid(gid)) {
ext4_msg(NULL, KERN_ERR, "Invalid gid value %d",
result.uint_32);
return -EINVAL;
}
ctx->s_resgid = gid;
ctx->spec |= EXT4_SPEC_s_resgid;
return 0;
case Opt_journal_dev:
if (is_remount) {
ext4_msg(NULL, KERN_ERR,
"Cannot specify journal on remount");
return -EINVAL;
}
ctx->journal_devnum = result.uint_32;
ctx->spec |= EXT4_SPEC_JOURNAL_DEV;
return 0;
case Opt_journal_path:
{
ext4: allow specifying external journal by pathname mount option It's always been a hassle that if an external journal's device number changes, the filesystem won't mount. And since boot-time enumeration can change, device number changes aren't unusual. The current mechanism to update the journal location is by passing in a mount option w/ a new devnum, but that's a hassle; it's a manual approach, fixing things after the fact. Adding a mount option, "-o journal_path=/dev/$DEVICE" would help, since then we can do i.e. # mount -o journal_path=/dev/disk/by-label/$JOURNAL_LABEL ... and it'll mount even if the devnum has changed, as shown here: # losetup /dev/loop0 journalfile # mke2fs -L mylabel-journal -O journal_dev /dev/loop0 # mkfs.ext4 -L mylabel -J device=/dev/loop0 /dev/sdb1 Change the journal device number: # losetup -d /dev/loop0 # losetup /dev/loop1 journalfile And today it will fail: # mount /dev/sdb1 /mnt/test mount: wrong fs type, bad option, bad superblock on /dev/sdb1, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so # dmesg | tail -n 1 [17343.240702] EXT4-fs (sdb1): error: couldn't read superblock of external journal But with this new mount option, we can specify the new path: # mount -o journal_path=/dev/loop1 /dev/sdb1 /mnt/test # (which does update the encoded device number, incidentally): # umount /dev/sdb1 # dumpe2fs -h /dev/sdb1 | grep "Journal device" dumpe2fs 1.41.12 (17-May-2010) Journal device: 0x0701 But best of all we can just always mount by journal-path, and it'll always work: # mount -o journal_path=/dev/disk/by-label/mylabel-journal /dev/sdb1 /mnt/test # So the journal_path option can be specified in fstab, and as long as the disk is available somewhere, and findable by label (or by UUID), we can mount. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
2013-08-28 23:05:07 +00:00
struct inode *journal_inode;
struct path path;
int error;
if (is_remount) {
ext4_msg(NULL, KERN_ERR,
ext4: allow specifying external journal by pathname mount option It's always been a hassle that if an external journal's device number changes, the filesystem won't mount. And since boot-time enumeration can change, device number changes aren't unusual. The current mechanism to update the journal location is by passing in a mount option w/ a new devnum, but that's a hassle; it's a manual approach, fixing things after the fact. Adding a mount option, "-o journal_path=/dev/$DEVICE" would help, since then we can do i.e. # mount -o journal_path=/dev/disk/by-label/$JOURNAL_LABEL ... and it'll mount even if the devnum has changed, as shown here: # losetup /dev/loop0 journalfile # mke2fs -L mylabel-journal -O journal_dev /dev/loop0 # mkfs.ext4 -L mylabel -J device=/dev/loop0 /dev/sdb1 Change the journal device number: # losetup -d /dev/loop0 # losetup /dev/loop1 journalfile And today it will fail: # mount /dev/sdb1 /mnt/test mount: wrong fs type, bad option, bad superblock on /dev/sdb1, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so # dmesg | tail -n 1 [17343.240702] EXT4-fs (sdb1): error: couldn't read superblock of external journal But with this new mount option, we can specify the new path: # mount -o journal_path=/dev/loop1 /dev/sdb1 /mnt/test # (which does update the encoded device number, incidentally): # umount /dev/sdb1 # dumpe2fs -h /dev/sdb1 | grep "Journal device" dumpe2fs 1.41.12 (17-May-2010) Journal device: 0x0701 But best of all we can just always mount by journal-path, and it'll always work: # mount -o journal_path=/dev/disk/by-label/mylabel-journal /dev/sdb1 /mnt/test # So the journal_path option can be specified in fstab, and as long as the disk is available somewhere, and findable by label (or by UUID), we can mount. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
2013-08-28 23:05:07 +00:00
"Cannot specify journal on remount");
return -EINVAL;
ext4: allow specifying external journal by pathname mount option It's always been a hassle that if an external journal's device number changes, the filesystem won't mount. And since boot-time enumeration can change, device number changes aren't unusual. The current mechanism to update the journal location is by passing in a mount option w/ a new devnum, but that's a hassle; it's a manual approach, fixing things after the fact. Adding a mount option, "-o journal_path=/dev/$DEVICE" would help, since then we can do i.e. # mount -o journal_path=/dev/disk/by-label/$JOURNAL_LABEL ... and it'll mount even if the devnum has changed, as shown here: # losetup /dev/loop0 journalfile # mke2fs -L mylabel-journal -O journal_dev /dev/loop0 # mkfs.ext4 -L mylabel -J device=/dev/loop0 /dev/sdb1 Change the journal device number: # losetup -d /dev/loop0 # losetup /dev/loop1 journalfile And today it will fail: # mount /dev/sdb1 /mnt/test mount: wrong fs type, bad option, bad superblock on /dev/sdb1, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so # dmesg | tail -n 1 [17343.240702] EXT4-fs (sdb1): error: couldn't read superblock of external journal But with this new mount option, we can specify the new path: # mount -o journal_path=/dev/loop1 /dev/sdb1 /mnt/test # (which does update the encoded device number, incidentally): # umount /dev/sdb1 # dumpe2fs -h /dev/sdb1 | grep "Journal device" dumpe2fs 1.41.12 (17-May-2010) Journal device: 0x0701 But best of all we can just always mount by journal-path, and it'll always work: # mount -o journal_path=/dev/disk/by-label/mylabel-journal /dev/sdb1 /mnt/test # So the journal_path option can be specified in fstab, and as long as the disk is available somewhere, and findable by label (or by UUID), we can mount. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
2013-08-28 23:05:07 +00:00
}
error = fs_lookup_param(fc, param, 1, LOOKUP_FOLLOW, &path);
ext4: allow specifying external journal by pathname mount option It's always been a hassle that if an external journal's device number changes, the filesystem won't mount. And since boot-time enumeration can change, device number changes aren't unusual. The current mechanism to update the journal location is by passing in a mount option w/ a new devnum, but that's a hassle; it's a manual approach, fixing things after the fact. Adding a mount option, "-o journal_path=/dev/$DEVICE" would help, since then we can do i.e. # mount -o journal_path=/dev/disk/by-label/$JOURNAL_LABEL ... and it'll mount even if the devnum has changed, as shown here: # losetup /dev/loop0 journalfile # mke2fs -L mylabel-journal -O journal_dev /dev/loop0 # mkfs.ext4 -L mylabel -J device=/dev/loop0 /dev/sdb1 Change the journal device number: # losetup -d /dev/loop0 # losetup /dev/loop1 journalfile And today it will fail: # mount /dev/sdb1 /mnt/test mount: wrong fs type, bad option, bad superblock on /dev/sdb1, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so # dmesg | tail -n 1 [17343.240702] EXT4-fs (sdb1): error: couldn't read superblock of external journal But with this new mount option, we can specify the new path: # mount -o journal_path=/dev/loop1 /dev/sdb1 /mnt/test # (which does update the encoded device number, incidentally): # umount /dev/sdb1 # dumpe2fs -h /dev/sdb1 | grep "Journal device" dumpe2fs 1.41.12 (17-May-2010) Journal device: 0x0701 But best of all we can just always mount by journal-path, and it'll always work: # mount -o journal_path=/dev/disk/by-label/mylabel-journal /dev/sdb1 /mnt/test # So the journal_path option can be specified in fstab, and as long as the disk is available somewhere, and findable by label (or by UUID), we can mount. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
2013-08-28 23:05:07 +00:00
if (error) {
ext4_msg(NULL, KERN_ERR, "error: could not find "
"journal device path");
return -EINVAL;
ext4: allow specifying external journal by pathname mount option It's always been a hassle that if an external journal's device number changes, the filesystem won't mount. And since boot-time enumeration can change, device number changes aren't unusual. The current mechanism to update the journal location is by passing in a mount option w/ a new devnum, but that's a hassle; it's a manual approach, fixing things after the fact. Adding a mount option, "-o journal_path=/dev/$DEVICE" would help, since then we can do i.e. # mount -o journal_path=/dev/disk/by-label/$JOURNAL_LABEL ... and it'll mount even if the devnum has changed, as shown here: # losetup /dev/loop0 journalfile # mke2fs -L mylabel-journal -O journal_dev /dev/loop0 # mkfs.ext4 -L mylabel -J device=/dev/loop0 /dev/sdb1 Change the journal device number: # losetup -d /dev/loop0 # losetup /dev/loop1 journalfile And today it will fail: # mount /dev/sdb1 /mnt/test mount: wrong fs type, bad option, bad superblock on /dev/sdb1, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so # dmesg | tail -n 1 [17343.240702] EXT4-fs (sdb1): error: couldn't read superblock of external journal But with this new mount option, we can specify the new path: # mount -o journal_path=/dev/loop1 /dev/sdb1 /mnt/test # (which does update the encoded device number, incidentally): # umount /dev/sdb1 # dumpe2fs -h /dev/sdb1 | grep "Journal device" dumpe2fs 1.41.12 (17-May-2010) Journal device: 0x0701 But best of all we can just always mount by journal-path, and it'll always work: # mount -o journal_path=/dev/disk/by-label/mylabel-journal /dev/sdb1 /mnt/test # So the journal_path option can be specified in fstab, and as long as the disk is available somewhere, and findable by label (or by UUID), we can mount. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
2013-08-28 23:05:07 +00:00
}
journal_inode = d_inode(path.dentry);
ctx->journal_devnum = new_encode_dev(journal_inode->i_rdev);
ctx->spec |= EXT4_SPEC_JOURNAL_DEV;
ext4: allow specifying external journal by pathname mount option It's always been a hassle that if an external journal's device number changes, the filesystem won't mount. And since boot-time enumeration can change, device number changes aren't unusual. The current mechanism to update the journal location is by passing in a mount option w/ a new devnum, but that's a hassle; it's a manual approach, fixing things after the fact. Adding a mount option, "-o journal_path=/dev/$DEVICE" would help, since then we can do i.e. # mount -o journal_path=/dev/disk/by-label/$JOURNAL_LABEL ... and it'll mount even if the devnum has changed, as shown here: # losetup /dev/loop0 journalfile # mke2fs -L mylabel-journal -O journal_dev /dev/loop0 # mkfs.ext4 -L mylabel -J device=/dev/loop0 /dev/sdb1 Change the journal device number: # losetup -d /dev/loop0 # losetup /dev/loop1 journalfile And today it will fail: # mount /dev/sdb1 /mnt/test mount: wrong fs type, bad option, bad superblock on /dev/sdb1, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so # dmesg | tail -n 1 [17343.240702] EXT4-fs (sdb1): error: couldn't read superblock of external journal But with this new mount option, we can specify the new path: # mount -o journal_path=/dev/loop1 /dev/sdb1 /mnt/test # (which does update the encoded device number, incidentally): # umount /dev/sdb1 # dumpe2fs -h /dev/sdb1 | grep "Journal device" dumpe2fs 1.41.12 (17-May-2010) Journal device: 0x0701 But best of all we can just always mount by journal-path, and it'll always work: # mount -o journal_path=/dev/disk/by-label/mylabel-journal /dev/sdb1 /mnt/test # So the journal_path option can be specified in fstab, and as long as the disk is available somewhere, and findable by label (or by UUID), we can mount. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
2013-08-28 23:05:07 +00:00
path_put(&path);
return 0;
}
case Opt_journal_ioprio:
if (result.uint_32 > 7) {
ext4_msg(NULL, KERN_ERR, "Invalid journal IO priority"
" (must be 0-7)");
return -EINVAL;
}
ctx->journal_ioprio =
IOPRIO_PRIO_VALUE(IOPRIO_CLASS_BE, result.uint_32);
ctx->spec |= EXT4_SPEC_JOURNAL_IOPRIO;
return 0;
case Opt_test_dummy_encryption:
return ext4_parse_test_dummy_encryption(param, ctx);
case Opt_dax:
case Opt_dax_type:
#ifdef CONFIG_FS_DAX
{
int type = (token == Opt_dax) ?
Opt_dax : result.uint_32;
switch (type) {
case Opt_dax:
case Opt_dax_always:
ctx_set_mount_opt(ctx, EXT4_MOUNT_DAX_ALWAYS);
ctx_clear_mount_opt2(ctx, EXT4_MOUNT2_DAX_NEVER);
break;
case Opt_dax_never:
ctx_set_mount_opt2(ctx, EXT4_MOUNT2_DAX_NEVER);
ctx_clear_mount_opt(ctx, EXT4_MOUNT_DAX_ALWAYS);
break;
case Opt_dax_inode:
ctx_clear_mount_opt(ctx, EXT4_MOUNT_DAX_ALWAYS);
ctx_clear_mount_opt2(ctx, EXT4_MOUNT2_DAX_NEVER);
/* Strictly for printing options */
ctx_set_mount_opt2(ctx, EXT4_MOUNT2_DAX_INODE);
break;
}
return 0;
}
#else
ext4_msg(NULL, KERN_INFO, "dax option not supported");
return -EINVAL;
#endif
case Opt_data_err:
if (result.uint_32 == Opt_data_err_abort)
ctx_set_mount_opt(ctx, m->mount_opt);
else if (result.uint_32 == Opt_data_err_ignore)
ctx_clear_mount_opt(ctx, m->mount_opt);
return 0;
case Opt_mb_optimize_scan:
if (result.int_32 == 1) {
ctx_set_mount_opt2(ctx, EXT4_MOUNT2_MB_OPTIMIZE_SCAN);
ctx->spec |= EXT4_SPEC_mb_optimize_scan;
} else if (result.int_32 == 0) {
ctx_clear_mount_opt2(ctx, EXT4_MOUNT2_MB_OPTIMIZE_SCAN);
ctx->spec |= EXT4_SPEC_mb_optimize_scan;
} else {
ext4_msg(NULL, KERN_WARNING,
ext4: improve cr 0 / cr 1 group scanning Instead of traversing through groups linearly, scan groups in specific orders at cr 0 and cr 1. At cr 0, we want to find groups that have the largest free order >= the order of the request. So, with this patch, we maintain lists for each possible order and insert each group into a list based on the largest free order in its buddy bitmap. During cr 0 allocation, we traverse these lists in the increasing order of largest free orders. This allows us to find a group with the best available cr 0 match in constant time. If nothing can be found, we fallback to cr 1 immediately. At CR1, the story is slightly different. We want to traverse in the order of increasing average fragment size. For CR1, we maintain a rb tree of groupinfos which is sorted by average fragment size. Instead of traversing linearly, at CR1, we traverse in the order of increasing average fragment size, starting at the most optimal group. This brings down cr 1 search complexity to log(num groups). For cr >= 2, we just perform the linear search as before. Also, in case of lock contention, we intermittently fallback to linear search even in CR 0 and CR 1 cases. This allows us to proceed during the allocation path even in case of high contention. There is an opportunity to do optimization at CR2 too. That's because at CR2 we only consider groups where bb_free counter (number of free blocks) is greater than the request extent size. That's left as future work. All the changes introduced in this patch are protected under a new mount option "mb_optimize_scan". With this patchset, following experiment was performed: Created a highly fragmented disk of size 65TB. The disk had no contiguous 2M regions. Following command was run consecutively for 3 times: time dd if=/dev/urandom of=file bs=2M count=10 Here are the results with and without cr 0/1 optimizations introduced in this patch: |---------+------------------------------+---------------------------| | | Without CR 0/1 Optimizations | With CR 0/1 Optimizations | |---------+------------------------------+---------------------------| | 1st run | 5m1.871s | 2m47.642s | | 2nd run | 2m28.390s | 0m0.611s | | 3rd run | 2m26.530s | 0m1.255s | |---------+------------------------------+---------------------------| Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com> Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Andreas Dilger <adilger@dilger.ca> Link: https://lore.kernel.org/r/20210401172129.189766-6-harshadshirwadkar@gmail.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2021-04-01 17:21:27 +00:00
"mb_optimize_scan should be set to 0 or 1.");
return -EINVAL;
ext4: improve cr 0 / cr 1 group scanning Instead of traversing through groups linearly, scan groups in specific orders at cr 0 and cr 1. At cr 0, we want to find groups that have the largest free order >= the order of the request. So, with this patch, we maintain lists for each possible order and insert each group into a list based on the largest free order in its buddy bitmap. During cr 0 allocation, we traverse these lists in the increasing order of largest free orders. This allows us to find a group with the best available cr 0 match in constant time. If nothing can be found, we fallback to cr 1 immediately. At CR1, the story is slightly different. We want to traverse in the order of increasing average fragment size. For CR1, we maintain a rb tree of groupinfos which is sorted by average fragment size. Instead of traversing linearly, at CR1, we traverse in the order of increasing average fragment size, starting at the most optimal group. This brings down cr 1 search complexity to log(num groups). For cr >= 2, we just perform the linear search as before. Also, in case of lock contention, we intermittently fallback to linear search even in CR 0 and CR 1 cases. This allows us to proceed during the allocation path even in case of high contention. There is an opportunity to do optimization at CR2 too. That's because at CR2 we only consider groups where bb_free counter (number of free blocks) is greater than the request extent size. That's left as future work. All the changes introduced in this patch are protected under a new mount option "mb_optimize_scan". With this patchset, following experiment was performed: Created a highly fragmented disk of size 65TB. The disk had no contiguous 2M regions. Following command was run consecutively for 3 times: time dd if=/dev/urandom of=file bs=2M count=10 Here are the results with and without cr 0/1 optimizations introduced in this patch: |---------+------------------------------+---------------------------| | | Without CR 0/1 Optimizations | With CR 0/1 Optimizations | |---------+------------------------------+---------------------------| | 1st run | 5m1.871s | 2m47.642s | | 2nd run | 2m28.390s | 0m0.611s | | 3rd run | 2m26.530s | 0m1.255s | |---------+------------------------------+---------------------------| Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com> Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Andreas Dilger <adilger@dilger.ca> Link: https://lore.kernel.org/r/20210401172129.189766-6-harshadshirwadkar@gmail.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2021-04-01 17:21:27 +00:00
}
return 0;
}
/*
* At this point we should only be getting options requiring MOPT_SET,
* or MOPT_CLEAR. Anything else is a bug
*/
if (m->token == Opt_err) {
ext4_msg(NULL, KERN_WARNING, "buggy handling of option %s",
param->key);
WARN_ON(1);
return -EINVAL;
}
else {
unsigned int set = 0;
if ((param->type == fs_value_is_flag) ||
result.uint_32 > 0)
set = 1;
if (m->flags & MOPT_CLEAR)
set = !set;
else if (unlikely(!(m->flags & MOPT_SET))) {
ext4_msg(NULL, KERN_WARNING,
"buggy handling of option %s",
param->key);
WARN_ON(1);
return -EINVAL;
}
if (m->flags & MOPT_2) {
if (set != 0)
ctx_set_mount_opt2(ctx, m->mount_opt);
else
ctx_clear_mount_opt2(ctx, m->mount_opt);
} else {
if (set != 0)
ctx_set_mount_opt(ctx, m->mount_opt);
else
ctx_clear_mount_opt(ctx, m->mount_opt);
}
}
return 0;
}
ext4: Completely separate options parsing and sb setup The new mount api separates option parsing and super block setup into two distinct steps and so we need to separate the options parsing out of the ext4_fill_super() and ext4_remount(). In order to achieve this we have to create new ext4_fill_super() and ext4_remount() functions which will serve its purpose only until we actually do convert to the new api (as such they are only temporary for this patch series) and move the option parsing out of the old function which will now be renamed to __ext4_fill_super() and __ext4_remount(). There is a small complication in the fact that while the mount option parsing is going to happen before we get to __ext4_fill_super(), the mount options stored in the super block itself needs to be applied first, before the user specified mount options. So with this patch we're going through the following sequence: - parse user provided options (including sb block) - initialize sbi and store s_sb_block if provided - in __ext4_fill_super() - read the super block - parse and apply options specified in s_mount_opts - check and apply user provided options stored in ctx - continue with the regular ext4_fill_super operation It's not exactly the most elegant solution, but if we still want to support s_mount_opts we have to do it in this order. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Link: https://lore.kernel.org/r/20211027141857.33657-10-lczerner@redhat.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2021-10-27 14:18:53 +00:00
static int parse_options(struct fs_context *fc, char *options)
{
struct fs_parameter param;
int ret;
char *key;
if (!options)
ext4: Completely separate options parsing and sb setup The new mount api separates option parsing and super block setup into two distinct steps and so we need to separate the options parsing out of the ext4_fill_super() and ext4_remount(). In order to achieve this we have to create new ext4_fill_super() and ext4_remount() functions which will serve its purpose only until we actually do convert to the new api (as such they are only temporary for this patch series) and move the option parsing out of the old function which will now be renamed to __ext4_fill_super() and __ext4_remount(). There is a small complication in the fact that while the mount option parsing is going to happen before we get to __ext4_fill_super(), the mount options stored in the super block itself needs to be applied first, before the user specified mount options. So with this patch we're going through the following sequence: - parse user provided options (including sb block) - initialize sbi and store s_sb_block if provided - in __ext4_fill_super() - read the super block - parse and apply options specified in s_mount_opts - check and apply user provided options stored in ctx - continue with the regular ext4_fill_super operation It's not exactly the most elegant solution, but if we still want to support s_mount_opts we have to do it in this order. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Link: https://lore.kernel.org/r/20211027141857.33657-10-lczerner@redhat.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2021-10-27 14:18:53 +00:00
return 0;
while ((key = strsep(&options, ",")) != NULL) {
if (*key) {
size_t v_len = 0;
char *value = strchr(key, '=');
param.type = fs_value_is_flag;
param.string = NULL;
if (value) {
if (value == key)
continue;
*value++ = 0;
v_len = strlen(value);
param.string = kmemdup_nul(value, v_len,
GFP_KERNEL);
if (!param.string)
ext4: Completely separate options parsing and sb setup The new mount api separates option parsing and super block setup into two distinct steps and so we need to separate the options parsing out of the ext4_fill_super() and ext4_remount(). In order to achieve this we have to create new ext4_fill_super() and ext4_remount() functions which will serve its purpose only until we actually do convert to the new api (as such they are only temporary for this patch series) and move the option parsing out of the old function which will now be renamed to __ext4_fill_super() and __ext4_remount(). There is a small complication in the fact that while the mount option parsing is going to happen before we get to __ext4_fill_super(), the mount options stored in the super block itself needs to be applied first, before the user specified mount options. So with this patch we're going through the following sequence: - parse user provided options (including sb block) - initialize sbi and store s_sb_block if provided - in __ext4_fill_super() - read the super block - parse and apply options specified in s_mount_opts - check and apply user provided options stored in ctx - continue with the regular ext4_fill_super operation It's not exactly the most elegant solution, but if we still want to support s_mount_opts we have to do it in this order. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Link: https://lore.kernel.org/r/20211027141857.33657-10-lczerner@redhat.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2021-10-27 14:18:53 +00:00
return -ENOMEM;
param.type = fs_value_is_string;
}
param.key = key;
param.size = v_len;
ret = ext4_parse_param(fc, &param);
kfree(param.string);
if (ret < 0)
ext4: Completely separate options parsing and sb setup The new mount api separates option parsing and super block setup into two distinct steps and so we need to separate the options parsing out of the ext4_fill_super() and ext4_remount(). In order to achieve this we have to create new ext4_fill_super() and ext4_remount() functions which will serve its purpose only until we actually do convert to the new api (as such they are only temporary for this patch series) and move the option parsing out of the old function which will now be renamed to __ext4_fill_super() and __ext4_remount(). There is a small complication in the fact that while the mount option parsing is going to happen before we get to __ext4_fill_super(), the mount options stored in the super block itself needs to be applied first, before the user specified mount options. So with this patch we're going through the following sequence: - parse user provided options (including sb block) - initialize sbi and store s_sb_block if provided - in __ext4_fill_super() - read the super block - parse and apply options specified in s_mount_opts - check and apply user provided options stored in ctx - continue with the regular ext4_fill_super operation It's not exactly the most elegant solution, but if we still want to support s_mount_opts we have to do it in this order. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Link: https://lore.kernel.org/r/20211027141857.33657-10-lczerner@redhat.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2021-10-27 14:18:53 +00:00
return ret;
}
}
ext4: Completely separate options parsing and sb setup The new mount api separates option parsing and super block setup into two distinct steps and so we need to separate the options parsing out of the ext4_fill_super() and ext4_remount(). In order to achieve this we have to create new ext4_fill_super() and ext4_remount() functions which will serve its purpose only until we actually do convert to the new api (as such they are only temporary for this patch series) and move the option parsing out of the old function which will now be renamed to __ext4_fill_super() and __ext4_remount(). There is a small complication in the fact that while the mount option parsing is going to happen before we get to __ext4_fill_super(), the mount options stored in the super block itself needs to be applied first, before the user specified mount options. So with this patch we're going through the following sequence: - parse user provided options (including sb block) - initialize sbi and store s_sb_block if provided - in __ext4_fill_super() - read the super block - parse and apply options specified in s_mount_opts - check and apply user provided options stored in ctx - continue with the regular ext4_fill_super operation It's not exactly the most elegant solution, but if we still want to support s_mount_opts we have to do it in this order. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Link: https://lore.kernel.org/r/20211027141857.33657-10-lczerner@redhat.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2021-10-27 14:18:53 +00:00
ret = ext4_validate_options(fc);
if (ret < 0)
ext4: Completely separate options parsing and sb setup The new mount api separates option parsing and super block setup into two distinct steps and so we need to separate the options parsing out of the ext4_fill_super() and ext4_remount(). In order to achieve this we have to create new ext4_fill_super() and ext4_remount() functions which will serve its purpose only until we actually do convert to the new api (as such they are only temporary for this patch series) and move the option parsing out of the old function which will now be renamed to __ext4_fill_super() and __ext4_remount(). There is a small complication in the fact that while the mount option parsing is going to happen before we get to __ext4_fill_super(), the mount options stored in the super block itself needs to be applied first, before the user specified mount options. So with this patch we're going through the following sequence: - parse user provided options (including sb block) - initialize sbi and store s_sb_block if provided - in __ext4_fill_super() - read the super block - parse and apply options specified in s_mount_opts - check and apply user provided options stored in ctx - continue with the regular ext4_fill_super operation It's not exactly the most elegant solution, but if we still want to support s_mount_opts we have to do it in this order. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Link: https://lore.kernel.org/r/20211027141857.33657-10-lczerner@redhat.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2021-10-27 14:18:53 +00:00
return ret;
ext4: Completely separate options parsing and sb setup The new mount api separates option parsing and super block setup into two distinct steps and so we need to separate the options parsing out of the ext4_fill_super() and ext4_remount(). In order to achieve this we have to create new ext4_fill_super() and ext4_remount() functions which will serve its purpose only until we actually do convert to the new api (as such they are only temporary for this patch series) and move the option parsing out of the old function which will now be renamed to __ext4_fill_super() and __ext4_remount(). There is a small complication in the fact that while the mount option parsing is going to happen before we get to __ext4_fill_super(), the mount options stored in the super block itself needs to be applied first, before the user specified mount options. So with this patch we're going through the following sequence: - parse user provided options (including sb block) - initialize sbi and store s_sb_block if provided - in __ext4_fill_super() - read the super block - parse and apply options specified in s_mount_opts - check and apply user provided options stored in ctx - continue with the regular ext4_fill_super operation It's not exactly the most elegant solution, but if we still want to support s_mount_opts we have to do it in this order. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Link: https://lore.kernel.org/r/20211027141857.33657-10-lczerner@redhat.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2021-10-27 14:18:53 +00:00
return 0;
}
static int parse_apply_sb_mount_options(struct super_block *sb,
struct ext4_fs_context *m_ctx)
{
struct ext4_sb_info *sbi = EXT4_SB(sb);
char *s_mount_opts = NULL;
struct ext4_fs_context *s_ctx = NULL;
struct fs_context *fc = NULL;
int ret = -ENOMEM;
if (!sbi->s_es->s_mount_opts[0])
return 0;
ext4: Completely separate options parsing and sb setup The new mount api separates option parsing and super block setup into two distinct steps and so we need to separate the options parsing out of the ext4_fill_super() and ext4_remount(). In order to achieve this we have to create new ext4_fill_super() and ext4_remount() functions which will serve its purpose only until we actually do convert to the new api (as such they are only temporary for this patch series) and move the option parsing out of the old function which will now be renamed to __ext4_fill_super() and __ext4_remount(). There is a small complication in the fact that while the mount option parsing is going to happen before we get to __ext4_fill_super(), the mount options stored in the super block itself needs to be applied first, before the user specified mount options. So with this patch we're going through the following sequence: - parse user provided options (including sb block) - initialize sbi and store s_sb_block if provided - in __ext4_fill_super() - read the super block - parse and apply options specified in s_mount_opts - check and apply user provided options stored in ctx - continue with the regular ext4_fill_super operation It's not exactly the most elegant solution, but if we still want to support s_mount_opts we have to do it in this order. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Link: https://lore.kernel.org/r/20211027141857.33657-10-lczerner@redhat.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2021-10-27 14:18:53 +00:00
s_mount_opts = kstrndup(sbi->s_es->s_mount_opts,
sizeof(sbi->s_es->s_mount_opts),
GFP_KERNEL);
if (!s_mount_opts)
return ret;
fc = kzalloc(sizeof(struct fs_context), GFP_KERNEL);
if (!fc)
goto out_free;
s_ctx = kzalloc(sizeof(struct ext4_fs_context), GFP_KERNEL);
if (!s_ctx)
goto out_free;
fc->fs_private = s_ctx;
fc->s_fs_info = sbi;
ret = parse_options(fc, s_mount_opts);
if (ret < 0)
ext4: Completely separate options parsing and sb setup The new mount api separates option parsing and super block setup into two distinct steps and so we need to separate the options parsing out of the ext4_fill_super() and ext4_remount(). In order to achieve this we have to create new ext4_fill_super() and ext4_remount() functions which will serve its purpose only until we actually do convert to the new api (as such they are only temporary for this patch series) and move the option parsing out of the old function which will now be renamed to __ext4_fill_super() and __ext4_remount(). There is a small complication in the fact that while the mount option parsing is going to happen before we get to __ext4_fill_super(), the mount options stored in the super block itself needs to be applied first, before the user specified mount options. So with this patch we're going through the following sequence: - parse user provided options (including sb block) - initialize sbi and store s_sb_block if provided - in __ext4_fill_super() - read the super block - parse and apply options specified in s_mount_opts - check and apply user provided options stored in ctx - continue with the regular ext4_fill_super operation It's not exactly the most elegant solution, but if we still want to support s_mount_opts we have to do it in this order. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Link: https://lore.kernel.org/r/20211027141857.33657-10-lczerner@redhat.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2021-10-27 14:18:53 +00:00
goto parse_failed;
ext4: Completely separate options parsing and sb setup The new mount api separates option parsing and super block setup into two distinct steps and so we need to separate the options parsing out of the ext4_fill_super() and ext4_remount(). In order to achieve this we have to create new ext4_fill_super() and ext4_remount() functions which will serve its purpose only until we actually do convert to the new api (as such they are only temporary for this patch series) and move the option parsing out of the old function which will now be renamed to __ext4_fill_super() and __ext4_remount(). There is a small complication in the fact that while the mount option parsing is going to happen before we get to __ext4_fill_super(), the mount options stored in the super block itself needs to be applied first, before the user specified mount options. So with this patch we're going through the following sequence: - parse user provided options (including sb block) - initialize sbi and store s_sb_block if provided - in __ext4_fill_super() - read the super block - parse and apply options specified in s_mount_opts - check and apply user provided options stored in ctx - continue with the regular ext4_fill_super operation It's not exactly the most elegant solution, but if we still want to support s_mount_opts we have to do it in this order. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Link: https://lore.kernel.org/r/20211027141857.33657-10-lczerner@redhat.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2021-10-27 14:18:53 +00:00
ret = ext4_check_opt_consistency(fc, sb);
if (ret < 0) {
parse_failed:
ext4_msg(sb, KERN_WARNING,
"failed to parse options in superblock: %s",
s_mount_opts);
ret = 0;
goto out_free;
}
if (s_ctx->spec & EXT4_SPEC_JOURNAL_DEV)
m_ctx->journal_devnum = s_ctx->journal_devnum;
if (s_ctx->spec & EXT4_SPEC_JOURNAL_IOPRIO)
m_ctx->journal_ioprio = s_ctx->journal_ioprio;
ext4_apply_options(fc, sb);
ret = 0;
ext4: Completely separate options parsing and sb setup The new mount api separates option parsing and super block setup into two distinct steps and so we need to separate the options parsing out of the ext4_fill_super() and ext4_remount(). In order to achieve this we have to create new ext4_fill_super() and ext4_remount() functions which will serve its purpose only until we actually do convert to the new api (as such they are only temporary for this patch series) and move the option parsing out of the old function which will now be renamed to __ext4_fill_super() and __ext4_remount(). There is a small complication in the fact that while the mount option parsing is going to happen before we get to __ext4_fill_super(), the mount options stored in the super block itself needs to be applied first, before the user specified mount options. So with this patch we're going through the following sequence: - parse user provided options (including sb block) - initialize sbi and store s_sb_block if provided - in __ext4_fill_super() - read the super block - parse and apply options specified in s_mount_opts - check and apply user provided options stored in ctx - continue with the regular ext4_fill_super operation It's not exactly the most elegant solution, but if we still want to support s_mount_opts we have to do it in this order. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Link: https://lore.kernel.org/r/20211027141857.33657-10-lczerner@redhat.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2021-10-27 14:18:53 +00:00
out_free:
if (fc) {
ext4_fc_free(fc);
kfree(fc);
}
ext4: Completely separate options parsing and sb setup The new mount api separates option parsing and super block setup into two distinct steps and so we need to separate the options parsing out of the ext4_fill_super() and ext4_remount(). In order to achieve this we have to create new ext4_fill_super() and ext4_remount() functions which will serve its purpose only until we actually do convert to the new api (as such they are only temporary for this patch series) and move the option parsing out of the old function which will now be renamed to __ext4_fill_super() and __ext4_remount(). There is a small complication in the fact that while the mount option parsing is going to happen before we get to __ext4_fill_super(), the mount options stored in the super block itself needs to be applied first, before the user specified mount options. So with this patch we're going through the following sequence: - parse user provided options (including sb block) - initialize sbi and store s_sb_block if provided - in __ext4_fill_super() - read the super block - parse and apply options specified in s_mount_opts - check and apply user provided options stored in ctx - continue with the regular ext4_fill_super operation It's not exactly the most elegant solution, but if we still want to support s_mount_opts we have to do it in this order. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Link: https://lore.kernel.org/r/20211027141857.33657-10-lczerner@redhat.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2021-10-27 14:18:53 +00:00
kfree(s_mount_opts);
return ret;
}
static void ext4_apply_quota_options(struct fs_context *fc,
struct super_block *sb)
{
#ifdef CONFIG_QUOTA
bool quota_feature = ext4_has_feature_quota(sb);
struct ext4_fs_context *ctx = fc->fs_private;
struct ext4_sb_info *sbi = EXT4_SB(sb);
char *qname;
int i;
if (quota_feature)
return;
if (ctx->spec & EXT4_SPEC_JQUOTA) {
for (i = 0; i < EXT4_MAXQUOTAS; i++) {
if (!(ctx->qname_spec & (1 << i)))
continue;
qname = ctx->s_qf_names[i]; /* May be NULL */
if (qname)
set_opt(sb, QUOTA);
ctx->s_qf_names[i] = NULL;
qname = rcu_replace_pointer(sbi->s_qf_names[i], qname,
lockdep_is_held(&sb->s_umount));
if (qname)
kfree_rcu_mightsleep(qname);
}
}
if (ctx->spec & EXT4_SPEC_JQFMT)
sbi->s_jquota_fmt = ctx->s_jquota_fmt;
#endif
}
/*
* Check quota settings consistency.
*/
static int ext4_check_quota_consistency(struct fs_context *fc,
struct super_block *sb)
{
#ifdef CONFIG_QUOTA
struct ext4_fs_context *ctx = fc->fs_private;
struct ext4_sb_info *sbi = EXT4_SB(sb);
bool quota_feature = ext4_has_feature_quota(sb);
bool quota_loaded = sb_any_quota_loaded(sb);
bool usr_qf_name, grp_qf_name, usrquota, grpquota;
int quota_flags, i;
/*
* We do the test below only for project quotas. 'usrquota' and
* 'grpquota' mount options are allowed even without quota feature
* to support legacy quotas in quota files.
*/
if (ctx_test_mount_opt(ctx, EXT4_MOUNT_PRJQUOTA) &&
!ext4_has_feature_project(sb)) {
ext4_msg(NULL, KERN_ERR, "Project quota feature not enabled. "
"Cannot enable project quota enforcement.");
return -EINVAL;
}
quota_flags = EXT4_MOUNT_QUOTA | EXT4_MOUNT_USRQUOTA |
EXT4_MOUNT_GRPQUOTA | EXT4_MOUNT_PRJQUOTA;
if (quota_loaded &&
ctx->mask_s_mount_opt & quota_flags &&
!ctx_test_mount_opt(ctx, quota_flags))
goto err_quota_change;
if (ctx->spec & EXT4_SPEC_JQUOTA) {
for (i = 0; i < EXT4_MAXQUOTAS; i++) {
if (!(ctx->qname_spec & (1 << i)))
continue;
if (quota_loaded &&
!!sbi->s_qf_names[i] != !!ctx->s_qf_names[i])
goto err_jquota_change;
if (sbi->s_qf_names[i] && ctx->s_qf_names[i] &&
strcmp(get_qf_name(sb, sbi, i),
ctx->s_qf_names[i]) != 0)
goto err_jquota_specified;
}
if (quota_feature) {
ext4_msg(NULL, KERN_INFO,
"Journaled quota options ignored when "
"QUOTA feature is enabled");
return 0;
}
}
if (ctx->spec & EXT4_SPEC_JQFMT) {
if (sbi->s_jquota_fmt != ctx->s_jquota_fmt && quota_loaded)
goto err_jquota_change;
if (quota_feature) {
ext4_msg(NULL, KERN_INFO, "Quota format mount options "
"ignored when QUOTA feature is enabled");
return 0;
}
}
/* Make sure we don't mix old and new quota format */
usr_qf_name = (get_qf_name(sb, sbi, USRQUOTA) ||
ctx->s_qf_names[USRQUOTA]);
grp_qf_name = (get_qf_name(sb, sbi, GRPQUOTA) ||
ctx->s_qf_names[GRPQUOTA]);
usrquota = (ctx_test_mount_opt(ctx, EXT4_MOUNT_USRQUOTA) ||
test_opt(sb, USRQUOTA));
grpquota = (ctx_test_mount_opt(ctx, EXT4_MOUNT_GRPQUOTA) ||
test_opt(sb, GRPQUOTA));
if (usr_qf_name) {
ctx_clear_mount_opt(ctx, EXT4_MOUNT_USRQUOTA);
usrquota = false;
}
if (grp_qf_name) {
ctx_clear_mount_opt(ctx, EXT4_MOUNT_GRPQUOTA);
grpquota = false;
}
if (usr_qf_name || grp_qf_name) {
if (usrquota || grpquota) {
ext4_msg(NULL, KERN_ERR, "old and new quota "
"format mixing");
return -EINVAL;
}
if (!(ctx->spec & EXT4_SPEC_JQFMT || sbi->s_jquota_fmt)) {
ext4_msg(NULL, KERN_ERR, "journaled quota format "
"not specified");
return -EINVAL;
}
}
return 0;
err_quota_change:
ext4_msg(NULL, KERN_ERR,
"Cannot change quota options when quota turned on");
return -EINVAL;
err_jquota_change:
ext4_msg(NULL, KERN_ERR, "Cannot change journaled quota "
"options when quota turned on");
return -EINVAL;
err_jquota_specified:
ext4_msg(NULL, KERN_ERR, "%s quota file already specified",
QTYPE2NAME(i));
return -EINVAL;
#else
return 0;
#endif
}
ext4: only allow test_dummy_encryption when supported Make the test_dummy_encryption mount option require that the encrypt feature flag be already enabled on the filesystem, rather than automatically enabling it. Practically, this means that "-O encrypt" will need to be included in MKFS_OPTIONS when running xfstests with the test_dummy_encryption mount option. (ext4/053 also needs an update.) Moreover, as long as the preconditions for test_dummy_encryption are being tightened anyway, take the opportunity to start rejecting it when !CONFIG_FS_ENCRYPTION rather than ignoring it. The motivation for requiring the encrypt feature flag is that: - Having the filesystem auto-enable feature flags is problematic, as it bypasses the usual sanity checks. The specific issue which came up recently is that in kernel versions where ext4 supports casefold but not encrypt+casefold (v5.1 through v5.10), the kernel will happily add the encrypt flag to a filesystem that has the casefold flag, making it unmountable -- but only for subsequent mounts, not the initial one. This confused the casefold support detection in xfstests, causing generic/556 to fail rather than be skipped. - The xfstests-bld test runners (kvm-xfstests et al.) already use the required mkfs flag, so they will not be affected by this change. Only users of test_dummy_encryption alone will be affected. But, this option has always been for testing only, so it should be fine to require that the few users of this option update their test scripts. - f2fs already requires it (for its equivalent feature flag). Signed-off-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Gabriel Krisman Bertazi <krisman@collabora.com> Link: https://lore.kernel.org/r/20220519204437.61645-1-ebiggers@kernel.org Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2022-05-19 20:44:37 +00:00
static int ext4_check_test_dummy_encryption(const struct fs_context *fc,
struct super_block *sb)
{
const struct ext4_fs_context *ctx = fc->fs_private;
const struct ext4_sb_info *sbi = EXT4_SB(sb);
if (!fscrypt_is_dummy_policy_set(&ctx->dummy_enc_policy))
ext4: only allow test_dummy_encryption when supported Make the test_dummy_encryption mount option require that the encrypt feature flag be already enabled on the filesystem, rather than automatically enabling it. Practically, this means that "-O encrypt" will need to be included in MKFS_OPTIONS when running xfstests with the test_dummy_encryption mount option. (ext4/053 also needs an update.) Moreover, as long as the preconditions for test_dummy_encryption are being tightened anyway, take the opportunity to start rejecting it when !CONFIG_FS_ENCRYPTION rather than ignoring it. The motivation for requiring the encrypt feature flag is that: - Having the filesystem auto-enable feature flags is problematic, as it bypasses the usual sanity checks. The specific issue which came up recently is that in kernel versions where ext4 supports casefold but not encrypt+casefold (v5.1 through v5.10), the kernel will happily add the encrypt flag to a filesystem that has the casefold flag, making it unmountable -- but only for subsequent mounts, not the initial one. This confused the casefold support detection in xfstests, causing generic/556 to fail rather than be skipped. - The xfstests-bld test runners (kvm-xfstests et al.) already use the required mkfs flag, so they will not be affected by this change. Only users of test_dummy_encryption alone will be affected. But, this option has always been for testing only, so it should be fine to require that the few users of this option update their test scripts. - f2fs already requires it (for its equivalent feature flag). Signed-off-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Gabriel Krisman Bertazi <krisman@collabora.com> Link: https://lore.kernel.org/r/20220519204437.61645-1-ebiggers@kernel.org Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2022-05-19 20:44:37 +00:00
return 0;
if (!ext4_has_feature_encrypt(sb)) {
ext4_msg(NULL, KERN_WARNING,
"test_dummy_encryption requires encrypt feature");
return -EINVAL;
}
/*
* This mount option is just for testing, and it's not worthwhile to
* implement the extra complexity (e.g. RCU protection) that would be
* needed to allow it to be set or changed during remount. We do allow
* it to be specified during remount, but only if there is no change.
*/
if (fc->purpose == FS_CONTEXT_FOR_RECONFIGURE) {
if (fscrypt_dummy_policies_equal(&sbi->s_dummy_enc_policy,
&ctx->dummy_enc_policy))
return 0;
ext4: only allow test_dummy_encryption when supported Make the test_dummy_encryption mount option require that the encrypt feature flag be already enabled on the filesystem, rather than automatically enabling it. Practically, this means that "-O encrypt" will need to be included in MKFS_OPTIONS when running xfstests with the test_dummy_encryption mount option. (ext4/053 also needs an update.) Moreover, as long as the preconditions for test_dummy_encryption are being tightened anyway, take the opportunity to start rejecting it when !CONFIG_FS_ENCRYPTION rather than ignoring it. The motivation for requiring the encrypt feature flag is that: - Having the filesystem auto-enable feature flags is problematic, as it bypasses the usual sanity checks. The specific issue which came up recently is that in kernel versions where ext4 supports casefold but not encrypt+casefold (v5.1 through v5.10), the kernel will happily add the encrypt flag to a filesystem that has the casefold flag, making it unmountable -- but only for subsequent mounts, not the initial one. This confused the casefold support detection in xfstests, causing generic/556 to fail rather than be skipped. - The xfstests-bld test runners (kvm-xfstests et al.) already use the required mkfs flag, so they will not be affected by this change. Only users of test_dummy_encryption alone will be affected. But, this option has always been for testing only, so it should be fine to require that the few users of this option update their test scripts. - f2fs already requires it (for its equivalent feature flag). Signed-off-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Gabriel Krisman Bertazi <krisman@collabora.com> Link: https://lore.kernel.org/r/20220519204437.61645-1-ebiggers@kernel.org Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2022-05-19 20:44:37 +00:00
ext4_msg(NULL, KERN_WARNING,
"Can't set or change test_dummy_encryption on remount");
ext4: only allow test_dummy_encryption when supported Make the test_dummy_encryption mount option require that the encrypt feature flag be already enabled on the filesystem, rather than automatically enabling it. Practically, this means that "-O encrypt" will need to be included in MKFS_OPTIONS when running xfstests with the test_dummy_encryption mount option. (ext4/053 also needs an update.) Moreover, as long as the preconditions for test_dummy_encryption are being tightened anyway, take the opportunity to start rejecting it when !CONFIG_FS_ENCRYPTION rather than ignoring it. The motivation for requiring the encrypt feature flag is that: - Having the filesystem auto-enable feature flags is problematic, as it bypasses the usual sanity checks. The specific issue which came up recently is that in kernel versions where ext4 supports casefold but not encrypt+casefold (v5.1 through v5.10), the kernel will happily add the encrypt flag to a filesystem that has the casefold flag, making it unmountable -- but only for subsequent mounts, not the initial one. This confused the casefold support detection in xfstests, causing generic/556 to fail rather than be skipped. - The xfstests-bld test runners (kvm-xfstests et al.) already use the required mkfs flag, so they will not be affected by this change. Only users of test_dummy_encryption alone will be affected. But, this option has always been for testing only, so it should be fine to require that the few users of this option update their test scripts. - f2fs already requires it (for its equivalent feature flag). Signed-off-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Gabriel Krisman Bertazi <krisman@collabora.com> Link: https://lore.kernel.org/r/20220519204437.61645-1-ebiggers@kernel.org Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2022-05-19 20:44:37 +00:00
return -EINVAL;
}
/* Also make sure s_mount_opts didn't contain a conflicting value. */
if (fscrypt_is_dummy_policy_set(&sbi->s_dummy_enc_policy)) {
if (fscrypt_dummy_policies_equal(&sbi->s_dummy_enc_policy,
&ctx->dummy_enc_policy))
return 0;
ext4_msg(NULL, KERN_WARNING,
"Conflicting test_dummy_encryption options");
return -EINVAL;
}
return 0;
}
static void ext4_apply_test_dummy_encryption(struct ext4_fs_context *ctx,
struct super_block *sb)
{
if (!fscrypt_is_dummy_policy_set(&ctx->dummy_enc_policy) ||
/* if already set, it was already verified to be the same */
fscrypt_is_dummy_policy_set(&EXT4_SB(sb)->s_dummy_enc_policy))
return;
EXT4_SB(sb)->s_dummy_enc_policy = ctx->dummy_enc_policy;
memset(&ctx->dummy_enc_policy, 0, sizeof(ctx->dummy_enc_policy));
ext4_msg(sb, KERN_WARNING, "Test dummy encryption mode enabled");
ext4: only allow test_dummy_encryption when supported Make the test_dummy_encryption mount option require that the encrypt feature flag be already enabled on the filesystem, rather than automatically enabling it. Practically, this means that "-O encrypt" will need to be included in MKFS_OPTIONS when running xfstests with the test_dummy_encryption mount option. (ext4/053 also needs an update.) Moreover, as long as the preconditions for test_dummy_encryption are being tightened anyway, take the opportunity to start rejecting it when !CONFIG_FS_ENCRYPTION rather than ignoring it. The motivation for requiring the encrypt feature flag is that: - Having the filesystem auto-enable feature flags is problematic, as it bypasses the usual sanity checks. The specific issue which came up recently is that in kernel versions where ext4 supports casefold but not encrypt+casefold (v5.1 through v5.10), the kernel will happily add the encrypt flag to a filesystem that has the casefold flag, making it unmountable -- but only for subsequent mounts, not the initial one. This confused the casefold support detection in xfstests, causing generic/556 to fail rather than be skipped. - The xfstests-bld test runners (kvm-xfstests et al.) already use the required mkfs flag, so they will not be affected by this change. Only users of test_dummy_encryption alone will be affected. But, this option has always been for testing only, so it should be fine to require that the few users of this option update their test scripts. - f2fs already requires it (for its equivalent feature flag). Signed-off-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Gabriel Krisman Bertazi <krisman@collabora.com> Link: https://lore.kernel.org/r/20220519204437.61645-1-ebiggers@kernel.org Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2022-05-19 20:44:37 +00:00
}
static int ext4_check_opt_consistency(struct fs_context *fc,
struct super_block *sb)
{
struct ext4_fs_context *ctx = fc->fs_private;
struct ext4_sb_info *sbi = fc->s_fs_info;
int is_remount = fc->purpose == FS_CONTEXT_FOR_RECONFIGURE;
ext4: only allow test_dummy_encryption when supported Make the test_dummy_encryption mount option require that the encrypt feature flag be already enabled on the filesystem, rather than automatically enabling it. Practically, this means that "-O encrypt" will need to be included in MKFS_OPTIONS when running xfstests with the test_dummy_encryption mount option. (ext4/053 also needs an update.) Moreover, as long as the preconditions for test_dummy_encryption are being tightened anyway, take the opportunity to start rejecting it when !CONFIG_FS_ENCRYPTION rather than ignoring it. The motivation for requiring the encrypt feature flag is that: - Having the filesystem auto-enable feature flags is problematic, as it bypasses the usual sanity checks. The specific issue which came up recently is that in kernel versions where ext4 supports casefold but not encrypt+casefold (v5.1 through v5.10), the kernel will happily add the encrypt flag to a filesystem that has the casefold flag, making it unmountable -- but only for subsequent mounts, not the initial one. This confused the casefold support detection in xfstests, causing generic/556 to fail rather than be skipped. - The xfstests-bld test runners (kvm-xfstests et al.) already use the required mkfs flag, so they will not be affected by this change. Only users of test_dummy_encryption alone will be affected. But, this option has always been for testing only, so it should be fine to require that the few users of this option update their test scripts. - f2fs already requires it (for its equivalent feature flag). Signed-off-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Gabriel Krisman Bertazi <krisman@collabora.com> Link: https://lore.kernel.org/r/20220519204437.61645-1-ebiggers@kernel.org Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2022-05-19 20:44:37 +00:00
int err;
if ((ctx->opt_flags & MOPT_NO_EXT2) && IS_EXT2_SB(sb)) {
ext4_msg(NULL, KERN_ERR,
"Mount option(s) incompatible with ext2");
return -EINVAL;
}
if ((ctx->opt_flags & MOPT_NO_EXT3) && IS_EXT3_SB(sb)) {
ext4_msg(NULL, KERN_ERR,
"Mount option(s) incompatible with ext3");
return -EINVAL;
}
if (ctx->s_want_extra_isize >
(sbi->s_inode_size - EXT4_GOOD_OLD_INODE_SIZE)) {
ext4_msg(NULL, KERN_ERR,
"Invalid want_extra_isize %d",
ctx->s_want_extra_isize);
return -EINVAL;
}
ext4: only allow test_dummy_encryption when supported Make the test_dummy_encryption mount option require that the encrypt feature flag be already enabled on the filesystem, rather than automatically enabling it. Practically, this means that "-O encrypt" will need to be included in MKFS_OPTIONS when running xfstests with the test_dummy_encryption mount option. (ext4/053 also needs an update.) Moreover, as long as the preconditions for test_dummy_encryption are being tightened anyway, take the opportunity to start rejecting it when !CONFIG_FS_ENCRYPTION rather than ignoring it. The motivation for requiring the encrypt feature flag is that: - Having the filesystem auto-enable feature flags is problematic, as it bypasses the usual sanity checks. The specific issue which came up recently is that in kernel versions where ext4 supports casefold but not encrypt+casefold (v5.1 through v5.10), the kernel will happily add the encrypt flag to a filesystem that has the casefold flag, making it unmountable -- but only for subsequent mounts, not the initial one. This confused the casefold support detection in xfstests, causing generic/556 to fail rather than be skipped. - The xfstests-bld test runners (kvm-xfstests et al.) already use the required mkfs flag, so they will not be affected by this change. Only users of test_dummy_encryption alone will be affected. But, this option has always been for testing only, so it should be fine to require that the few users of this option update their test scripts. - f2fs already requires it (for its equivalent feature flag). Signed-off-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Gabriel Krisman Bertazi <krisman@collabora.com> Link: https://lore.kernel.org/r/20220519204437.61645-1-ebiggers@kernel.org Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2022-05-19 20:44:37 +00:00
err = ext4_check_test_dummy_encryption(fc, sb);
if (err)
return err;
if ((ctx->spec & EXT4_SPEC_DATAJ) && is_remount) {
if (!sbi->s_journal) {
ext4_msg(NULL, KERN_WARNING,
"Remounting file system with no journal "
"so ignoring journalled data option");
ctx_clear_mount_opt(ctx, EXT4_MOUNT_DATA_FLAGS);
} else if (ctx_test_mount_opt(ctx, EXT4_MOUNT_DATA_FLAGS) !=
test_opt(sb, DATA_FLAGS)) {
ext4_msg(NULL, KERN_ERR, "Cannot change data mode "
"on remount");
return -EINVAL;
}
}
if (is_remount) {
if (ctx_test_mount_opt(ctx, EXT4_MOUNT_DAX_ALWAYS) &&
(test_opt(sb, DATA_FLAGS) == EXT4_MOUNT_JOURNAL_DATA)) {
ext4_msg(NULL, KERN_ERR, "can't mount with "
"both data=journal and dax");
return -EINVAL;
}
if (ctx_test_mount_opt(ctx, EXT4_MOUNT_DAX_ALWAYS) &&
(!(sbi->s_mount_opt & EXT4_MOUNT_DAX_ALWAYS) ||
(sbi->s_mount_opt2 & EXT4_MOUNT2_DAX_NEVER))) {
fail_dax_change_remount:
ext4_msg(NULL, KERN_ERR, "can't change "
"dax mount option while remounting");
return -EINVAL;
} else if (ctx_test_mount_opt2(ctx, EXT4_MOUNT2_DAX_NEVER) &&
(!(sbi->s_mount_opt2 & EXT4_MOUNT2_DAX_NEVER) ||
(sbi->s_mount_opt & EXT4_MOUNT_DAX_ALWAYS))) {
goto fail_dax_change_remount;
} else if (ctx_test_mount_opt2(ctx, EXT4_MOUNT2_DAX_INODE) &&
((sbi->s_mount_opt & EXT4_MOUNT_DAX_ALWAYS) ||
(sbi->s_mount_opt2 & EXT4_MOUNT2_DAX_NEVER) ||
!(sbi->s_mount_opt2 & EXT4_MOUNT2_DAX_INODE))) {
goto fail_dax_change_remount;
}
}
return ext4_check_quota_consistency(fc, sb);
}
static void ext4_apply_options(struct fs_context *fc, struct super_block *sb)
{
struct ext4_fs_context *ctx = fc->fs_private;
struct ext4_sb_info *sbi = fc->s_fs_info;
sbi->s_mount_opt &= ~ctx->mask_s_mount_opt;
sbi->s_mount_opt |= ctx->vals_s_mount_opt;
sbi->s_mount_opt2 &= ~ctx->mask_s_mount_opt2;
sbi->s_mount_opt2 |= ctx->vals_s_mount_opt2;
sb->s_flags &= ~ctx->mask_s_flags;
sb->s_flags |= ctx->vals_s_flags;
#define APPLY(X) ({ if (ctx->spec & EXT4_SPEC_##X) sbi->X = ctx->X; })
APPLY(s_commit_interval);
APPLY(s_stripe);
APPLY(s_max_batch_time);
APPLY(s_min_batch_time);
APPLY(s_want_extra_isize);
APPLY(s_inode_readahead_blks);
APPLY(s_max_dir_size_kb);
APPLY(s_li_wait_mult);
APPLY(s_resgid);
APPLY(s_resuid);
#ifdef CONFIG_EXT4_DEBUG
APPLY(s_fc_debug_max_replay);
#endif
ext4_apply_quota_options(fc, sb);
ext4_apply_test_dummy_encryption(ctx, sb);
}
static int ext4_validate_options(struct fs_context *fc)
{
#ifdef CONFIG_QUOTA
struct ext4_fs_context *ctx = fc->fs_private;
char *usr_qf_name, *grp_qf_name;
usr_qf_name = ctx->s_qf_names[USRQUOTA];
grp_qf_name = ctx->s_qf_names[GRPQUOTA];
if (usr_qf_name || grp_qf_name) {
if (ctx_test_mount_opt(ctx, EXT4_MOUNT_USRQUOTA) && usr_qf_name)
ctx_clear_mount_opt(ctx, EXT4_MOUNT_USRQUOTA);
if (ctx_test_mount_opt(ctx, EXT4_MOUNT_GRPQUOTA) && grp_qf_name)
ctx_clear_mount_opt(ctx, EXT4_MOUNT_GRPQUOTA);
if (ctx_test_mount_opt(ctx, EXT4_MOUNT_USRQUOTA) ||
ctx_test_mount_opt(ctx, EXT4_MOUNT_GRPQUOTA)) {
ext4_msg(NULL, KERN_ERR, "old and new quota "
"format mixing");
return -EINVAL;
}
}
#endif
return 1;
}
static inline void ext4_show_quota_options(struct seq_file *seq,
struct super_block *sb)
{
#if defined(CONFIG_QUOTA)
struct ext4_sb_info *sbi = EXT4_SB(sb);
char *usr_qf_name, *grp_qf_name;
if (sbi->s_jquota_fmt) {
char *fmtname = "";
switch (sbi->s_jquota_fmt) {
case QFMT_VFS_OLD:
fmtname = "vfsold";
break;
case QFMT_VFS_V0:
fmtname = "vfsv0";
break;
case QFMT_VFS_V1:
fmtname = "vfsv1";
break;
}
seq_printf(seq, ",jqfmt=%s", fmtname);
}
rcu_read_lock();
usr_qf_name = rcu_dereference(sbi->s_qf_names[USRQUOTA]);
grp_qf_name = rcu_dereference(sbi->s_qf_names[GRPQUOTA]);
if (usr_qf_name)
seq_show_option(seq, "usrjquota", usr_qf_name);
if (grp_qf_name)
seq_show_option(seq, "grpjquota", grp_qf_name);
rcu_read_unlock();
#endif
}
static const char *token2str(int token)
{
const struct fs_parameter_spec *spec;
for (spec = ext4_param_specs; spec->name != NULL; spec++)
if (spec->opt == token && !spec->type)
break;
return spec->name;
}
/*
* Show an option if
* - it's set to a non-default value OR
* - if the per-sb default is different from the global default
*/
static int _ext4_show_options(struct seq_file *seq, struct super_block *sb,
int nodefs)
{
struct ext4_sb_info *sbi = EXT4_SB(sb);
struct ext4_super_block *es = sbi->s_es;
int def_errors;
const struct mount_opts *m;
char sep = nodefs ? '\n' : ',';
#define SEQ_OPTS_PUTS(str) seq_printf(seq, "%c" str, sep)
#define SEQ_OPTS_PRINT(str, arg) seq_printf(seq, "%c" str, sep, arg)
if (sbi->s_sb_block != 1)
SEQ_OPTS_PRINT("sb=%llu", sbi->s_sb_block);
for (m = ext4_mount_opts; m->token != Opt_err; m++) {
int want_set = m->flags & MOPT_SET;
int opt_2 = m->flags & MOPT_2;
unsigned int mount_opt, def_mount_opt;
if (((m->flags & (MOPT_SET|MOPT_CLEAR)) == 0) ||
m->flags & MOPT_SKIP)
continue;
if (opt_2) {
mount_opt = sbi->s_mount_opt2;
def_mount_opt = sbi->s_def_mount_opt2;
} else {
mount_opt = sbi->s_mount_opt;
def_mount_opt = sbi->s_def_mount_opt;
}
/* skip if same as the default */
if (!nodefs && !(m->mount_opt & (mount_opt ^ def_mount_opt)))
continue;
/* select Opt_noFoo vs Opt_Foo */
if ((want_set &&
(mount_opt & m->mount_opt) != m->mount_opt) ||
(!want_set && (mount_opt & m->mount_opt)))
continue;
SEQ_OPTS_PRINT("%s", token2str(m->token));
}
if (nodefs || !uid_eq(sbi->s_resuid, make_kuid(&init_user_ns, EXT4_DEF_RESUID)) ||
le16_to_cpu(es->s_def_resuid) != EXT4_DEF_RESUID)
SEQ_OPTS_PRINT("resuid=%u",
from_kuid_munged(&init_user_ns, sbi->s_resuid));
if (nodefs || !gid_eq(sbi->s_resgid, make_kgid(&init_user_ns, EXT4_DEF_RESGID)) ||
le16_to_cpu(es->s_def_resgid) != EXT4_DEF_RESGID)
SEQ_OPTS_PRINT("resgid=%u",
from_kgid_munged(&init_user_ns, sbi->s_resgid));
def_errors = nodefs ? -1 : le16_to_cpu(es->s_errors);
if (test_opt(sb, ERRORS_RO) && def_errors != EXT4_ERRORS_RO)
SEQ_OPTS_PUTS("errors=remount-ro");
if (test_opt(sb, ERRORS_CONT) && def_errors != EXT4_ERRORS_CONTINUE)
SEQ_OPTS_PUTS("errors=continue");
if (test_opt(sb, ERRORS_PANIC) && def_errors != EXT4_ERRORS_PANIC)
SEQ_OPTS_PUTS("errors=panic");
if (nodefs || sbi->s_commit_interval != JBD2_DEFAULT_MAX_COMMIT_AGE*HZ)
SEQ_OPTS_PRINT("commit=%lu", sbi->s_commit_interval / HZ);
if (nodefs || sbi->s_min_batch_time != EXT4_DEF_MIN_BATCH_TIME)
SEQ_OPTS_PRINT("min_batch_time=%u", sbi->s_min_batch_time);
if (nodefs || sbi->s_max_batch_time != EXT4_DEF_MAX_BATCH_TIME)
SEQ_OPTS_PRINT("max_batch_time=%u", sbi->s_max_batch_time);
if (nodefs || sbi->s_stripe)
SEQ_OPTS_PRINT("stripe=%lu", sbi->s_stripe);
if (nodefs || EXT4_MOUNT_DATA_FLAGS &
(sbi->s_mount_opt ^ sbi->s_def_mount_opt)) {
if (test_opt(sb, DATA_FLAGS) == EXT4_MOUNT_JOURNAL_DATA)
SEQ_OPTS_PUTS("data=journal");
else if (test_opt(sb, DATA_FLAGS) == EXT4_MOUNT_ORDERED_DATA)
SEQ_OPTS_PUTS("data=ordered");
else if (test_opt(sb, DATA_FLAGS) == EXT4_MOUNT_WRITEBACK_DATA)
SEQ_OPTS_PUTS("data=writeback");
}
if (nodefs ||
sbi->s_inode_readahead_blks != EXT4_DEF_INODE_READAHEAD_BLKS)
SEQ_OPTS_PRINT("inode_readahead_blks=%u",
sbi->s_inode_readahead_blks);
if (test_opt(sb, INIT_INODE_TABLE) && (nodefs ||
(sbi->s_li_wait_mult != EXT4_DEF_LI_WAIT_MULT)))
SEQ_OPTS_PRINT("init_itable=%u", sbi->s_li_wait_mult);
if (nodefs || sbi->s_max_dir_size_kb)
SEQ_OPTS_PRINT("max_dir_size_kb=%u", sbi->s_max_dir_size_kb);
if (test_opt(sb, DATA_ERR_ABORT))
SEQ_OPTS_PUTS("data_err=abort");
fscrypt: support test_dummy_encryption=v2 v1 encryption policies are deprecated in favor of v2, and some new features (e.g. encryption+casefolding) are only being added for v2. Therefore, the "test_dummy_encryption" mount option (which is used for encryption I/O testing with xfstests) needs to support v2 policies. To do this, extend its syntax to be "test_dummy_encryption=v1" or "test_dummy_encryption=v2". The existing "test_dummy_encryption" (no argument) also continues to be accepted, to specify the default setting -- currently v1, but the next patch changes it to v2. To cleanly support both v1 and v2 while also making it easy to support specifying other encryption settings in the future (say, accepting "$contents_mode:$filenames_mode:v2"), make ext4 and f2fs maintain a pointer to the dummy fscrypt_context rather than using mount flags. To avoid concurrency issues, don't allow test_dummy_encryption to be set or changed during a remount. (The former restriction is new, but xfstests doesn't run into it, so no one should notice.) Tested with 'gce-xfstests -c {ext4,f2fs}/encrypt -g auto'. On ext4, there are two regressions, both of which are test bugs: ext4/023 and ext4/028 fail because they set an xattr and expect it to be stored inline, but the increase in size of the fscrypt_context from 24 to 40 bytes causes this xattr to be spilled into an external block. Link: https://lore.kernel.org/r/20200512233251.118314-4-ebiggers@kernel.org Acked-by: Jaegeuk Kim <jaegeuk@kernel.org> Reviewed-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Eric Biggers <ebiggers@google.com>
2020-05-12 23:32:50 +00:00
fscrypt_show_test_dummy_encryption(seq, sep, sb);
if (sb->s_flags & SB_INLINECRYPT)
SEQ_OPTS_PUTS("inlinecrypt");
if (test_opt(sb, DAX_ALWAYS)) {
if (IS_EXT2_SB(sb))
SEQ_OPTS_PUTS("dax");
else
SEQ_OPTS_PUTS("dax=always");
} else if (test_opt2(sb, DAX_NEVER)) {
SEQ_OPTS_PUTS("dax=never");
} else if (test_opt2(sb, DAX_INODE)) {
SEQ_OPTS_PUTS("dax=inode");
}
if (sbi->s_groups_count >= MB_DEFAULT_LINEAR_SCAN_THRESHOLD &&
!test_opt2(sb, MB_OPTIMIZE_SCAN)) {
SEQ_OPTS_PUTS("mb_optimize_scan=0");
} else if (sbi->s_groups_count < MB_DEFAULT_LINEAR_SCAN_THRESHOLD &&
test_opt2(sb, MB_OPTIMIZE_SCAN)) {
SEQ_OPTS_PUTS("mb_optimize_scan=1");
}
ext4_show_quota_options(seq, sb);
return 0;
}
static int ext4_show_options(struct seq_file *seq, struct dentry *root)
{
return _ext4_show_options(seq, root->d_sb, 0);
}
int ext4_seq_options_show(struct seq_file *seq, void *offset)
{
struct super_block *sb = seq->private;
int rc;
seq_puts(seq, sb_rdonly(sb) ? "ro" : "rw");
rc = _ext4_show_options(seq, sb, 1);
seq_puts(seq, "\n");
return rc;
}
static int ext4_setup_super(struct super_block *sb, struct ext4_super_block *es,
int read_only)
{
struct ext4_sb_info *sbi = EXT4_SB(sb);
int err = 0;
if (le32_to_cpu(es->s_rev_level) > EXT4_MAX_SUPP_REV) {
ext4_msg(sb, KERN_ERR, "revision level too high, "
"forcing read-only mode");
err = -EROFS;
goto done;
}
if (read_only)
goto done;
if (!(sbi->s_mount_state & EXT4_VALID_FS))
ext4_msg(sb, KERN_WARNING, "warning: mounting unchecked fs, "
"running e2fsck is recommended");
else if (sbi->s_mount_state & EXT4_ERROR_FS)
ext4_msg(sb, KERN_WARNING,
"warning: mounting fs with errors, "
"running e2fsck is recommended");
else if ((__s16) le16_to_cpu(es->s_max_mnt_count) > 0 &&
le16_to_cpu(es->s_mnt_count) >=
(unsigned short) (__s16) le16_to_cpu(es->s_max_mnt_count))
ext4_msg(sb, KERN_WARNING,
"warning: maximal mount count reached, "
"running e2fsck is recommended");
else if (le32_to_cpu(es->s_checkinterval) &&
(ext4_get_tstamp(es, s_lastcheck) +
le32_to_cpu(es->s_checkinterval) <= ktime_get_real_seconds()))
ext4_msg(sb, KERN_WARNING,
"warning: checktime reached, "
"running e2fsck is recommended");
if (!sbi->s_journal)
es->s_state &= cpu_to_le16(~EXT4_VALID_FS);
if (!(__s16) le16_to_cpu(es->s_max_mnt_count))
es->s_max_mnt_count = cpu_to_le16(EXT4_DFL_MAX_MNT_COUNT);
le16_add_cpu(&es->s_mnt_count, 1);
ext4_update_tstamp(es, s_mtime);
ext4: Speedup ext4 orphan inode handling Ext4 orphan inode handling is a bottleneck for workloads which heavily truncate / unlink small files since it contends on the global s_orphan_mutex lock (and generally it's difficult to improve scalability of the ondisk linked list of orphaned inodes). This patch implements new way of handling orphan inodes. Instead of linking orphaned inode into a linked list, we store it's inode number in a new special file which we call "orphan file". Only if there's no more space in the orphan file (too many inodes are currently orphaned) we fall back to using old style linked list. Currently we protect operations in the orphan file with a spinlock for simplicity but even in this setting we can substantially reduce the length of the critical section and thus speedup some workloads. In the next patch we improve this by making orphan handling lockless. Note that the change is backwards compatible when the filesystem is clean - the existence of the orphan file is a compat feature, we set another ro-compat feature indicating orphan file needs scanning for orphaned inodes when mounting filesystem read-write. This ro-compat feature gets cleared on unmount / remount read-only. Some performance data from 80 CPU Xeon Server with 512 GB of RAM, filesystem located on SSD, average of 5 runs: stress-orphan (microbenchmark truncating files byte-by-byte from N processes in parallel) Threads Time Time Vanilla Patched 1 1.057200 0.945600 2 1.680400 1.331800 4 2.547000 1.995000 8 7.049400 6.424200 16 14.827800 14.937600 32 40.948200 33.038200 64 87.787400 60.823600 128 206.504000 122.941400 So we can see significant wins all over the board. Reviewed-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20210816095713.16537-3-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2021-08-16 09:57:06 +00:00
if (sbi->s_journal) {
ext4_set_feature_journal_needs_recovery(sb);
ext4: Speedup ext4 orphan inode handling Ext4 orphan inode handling is a bottleneck for workloads which heavily truncate / unlink small files since it contends on the global s_orphan_mutex lock (and generally it's difficult to improve scalability of the ondisk linked list of orphaned inodes). This patch implements new way of handling orphan inodes. Instead of linking orphaned inode into a linked list, we store it's inode number in a new special file which we call "orphan file". Only if there's no more space in the orphan file (too many inodes are currently orphaned) we fall back to using old style linked list. Currently we protect operations in the orphan file with a spinlock for simplicity but even in this setting we can substantially reduce the length of the critical section and thus speedup some workloads. In the next patch we improve this by making orphan handling lockless. Note that the change is backwards compatible when the filesystem is clean - the existence of the orphan file is a compat feature, we set another ro-compat feature indicating orphan file needs scanning for orphaned inodes when mounting filesystem read-write. This ro-compat feature gets cleared on unmount / remount read-only. Some performance data from 80 CPU Xeon Server with 512 GB of RAM, filesystem located on SSD, average of 5 runs: stress-orphan (microbenchmark truncating files byte-by-byte from N processes in parallel) Threads Time Time Vanilla Patched 1 1.057200 0.945600 2 1.680400 1.331800 4 2.547000 1.995000 8 7.049400 6.424200 16 14.827800 14.937600 32 40.948200 33.038200 64 87.787400 60.823600 128 206.504000 122.941400 So we can see significant wins all over the board. Reviewed-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20210816095713.16537-3-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2021-08-16 09:57:06 +00:00
if (ext4_has_feature_orphan_file(sb))
ext4_set_feature_orphan_present(sb);
}
err = ext4_commit_super(sb);
done:
if (test_opt(sb, DEBUG))
printk(KERN_INFO "[EXT4 FS bs=%lu, gc=%u, "
"bpg=%lu, ipg=%lu, mo=%04x, mo2=%04x]\n",
sb->s_blocksize,
sbi->s_groups_count,
EXT4_BLOCKS_PER_GROUP(sb),
EXT4_INODES_PER_GROUP(sb),
sbi->s_mount_opt, sbi->s_mount_opt2);
return err;
}
int ext4_alloc_flex_bg_array(struct super_block *sb, ext4_group_t ngroup)
{
struct ext4_sb_info *sbi = EXT4_SB(sb);
struct flex_groups **old_groups, **new_groups;
int size, i, j;
if (!sbi->s_log_groups_per_flex)
return 0;
size = ext4_flex_group(sbi, ngroup - 1) + 1;
if (size <= sbi->s_flex_groups_allocated)
return 0;
new_groups = kvzalloc(roundup_pow_of_two(size *
sizeof(*sbi->s_flex_groups)), GFP_KERNEL);
if (!new_groups) {
ext4_msg(sb, KERN_ERR,
"not enough memory for %d flex group pointers", size);
return -ENOMEM;
}
for (i = sbi->s_flex_groups_allocated; i < size; i++) {
new_groups[i] = kvzalloc(roundup_pow_of_two(
sizeof(struct flex_groups)),
GFP_KERNEL);
if (!new_groups[i]) {
for (j = sbi->s_flex_groups_allocated; j < i; j++)
kvfree(new_groups[j]);
kvfree(new_groups);
ext4_msg(sb, KERN_ERR,
"not enough memory for %d flex groups", size);
return -ENOMEM;
}
}
rcu_read_lock();
old_groups = rcu_dereference(sbi->s_flex_groups);
if (old_groups)
memcpy(new_groups, old_groups,
(sbi->s_flex_groups_allocated *
sizeof(struct flex_groups *)));
rcu_read_unlock();
rcu_assign_pointer(sbi->s_flex_groups, new_groups);
sbi->s_flex_groups_allocated = size;
if (old_groups)
ext4_kvfree_array_rcu(old_groups);
return 0;
}
static int ext4_fill_flex_info(struct super_block *sb)
{
struct ext4_sb_info *sbi = EXT4_SB(sb);
struct ext4_group_desc *gdp = NULL;
struct flex_groups *fg;
ext4_group_t flex_group;
int i, err;
sbi->s_log_groups_per_flex = sbi->s_es->s_log_groups_per_flex;
ext4: fix undefined behavior in ext4_fill_flex_info() Commit 503358ae01b70ce6909d19dd01287093f6b6271c ("ext4: avoid divide by zero when trying to mount a corrupted file system") fixes CVE-2009-4307 by performing a sanity check on s_log_groups_per_flex, since it can be set to a bogus value by an attacker. sbi->s_log_groups_per_flex = sbi->s_es->s_log_groups_per_flex; groups_per_flex = 1 << sbi->s_log_groups_per_flex; if (groups_per_flex < 2) { ... } This patch fixes two potential issues in the previous commit. 1) The sanity check might only work on architectures like PowerPC. On x86, 5 bits are used for the shifting amount. That means, given a large s_log_groups_per_flex value like 36, groups_per_flex = 1 << 36 is essentially 1 << 4 = 16, rather than 0. This will bypass the check, leaving s_log_groups_per_flex and groups_per_flex inconsistent. 2) The sanity check relies on undefined behavior, i.e., oversized shift. A standard-confirming C compiler could rewrite the check in unexpected ways. Consider the following equivalent form, assuming groups_per_flex is unsigned for simplicity. groups_per_flex = 1 << sbi->s_log_groups_per_flex; if (groups_per_flex == 0 || groups_per_flex == 1) { We compile the code snippet using Clang 3.0 and GCC 4.6. Clang will completely optimize away the check groups_per_flex == 0, leaving the patched code as vulnerable as the original. GCC keeps the check, but there is no guarantee that future versions will do the same. Signed-off-by: Xi Wang <xi.wang@gmail.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: stable@vger.kernel.org
2012-01-10 16:51:10 +00:00
if (sbi->s_log_groups_per_flex < 1 || sbi->s_log_groups_per_flex > 31) {
sbi->s_log_groups_per_flex = 0;
return 1;
}
err = ext4_alloc_flex_bg_array(sb, sbi->s_groups_count);
if (err)
goto failed;
for (i = 0; i < sbi->s_groups_count; i++) {
gdp = ext4_get_group_desc(sb, i, NULL);
flex_group = ext4_flex_group(sbi, i);
fg = sbi_array_rcu_deref(sbi, s_flex_groups, flex_group);
atomic_add(ext4_free_inodes_count(sb, gdp), &fg->free_inodes);
atomic64_add(ext4_free_group_clusters(sb, gdp),
&fg->free_clusters);
atomic_add(ext4_used_dirs_count(sb, gdp), &fg->used_dirs);
}
return 1;
failed:
return 0;
}
static __le16 ext4_group_desc_csum(struct super_block *sb, __u32 block_group,
struct ext4_group_desc *gdp)
Ext4: Uninitialized Block Groups In pass1 of e2fsck, every inode table in the fileystem is scanned and checked, regardless of whether it is in use. This is this the most time consuming part of the filesystem check. The unintialized block group feature can greatly reduce e2fsck time by eliminating checking of uninitialized inodes. With this feature, there is a a high water mark of used inodes for each block group. Block and inode bitmaps can be uninitialized on disk via a flag in the group descriptor to avoid reading or scanning them at e2fsck time. A checksum of each group descriptor is used to ensure that corruption in the group descriptor's bit flags does not cause incorrect operation. The feature is enabled through a mkfs option mke2fs /dev/ -O uninit_groups A patch adding support for uninitialized block groups to e2fsprogs tools has been posted to the linux-ext4 mailing list. The patches have been stress tested with fsstress and fsx. In performance tests testing e2fsck time, we have seen that e2fsck time on ext3 grows linearly with the total number of inodes in the filesytem. In ext4 with the uninitialized block groups feature, the e2fsck time is constant, based solely on the number of used inodes rather than the total inode count. Since typical ext4 filesystems only use 1-10% of their inodes, this feature can greatly reduce e2fsck time for users. With performance improvement of 2-20 times, depending on how full the filesystem is. The attached graph shows the major improvements in e2fsck times in filesystems with a large total inode count, but few inodes in use. In each group descriptor if we have EXT4_BG_INODE_UNINIT set in bg_flags: Inode table is not initialized/used in this group. So we can skip the consistency check during fsck. EXT4_BG_BLOCK_UNINIT set in bg_flags: No block in the group is used. So we can skip the block bitmap verification for this group. We also add two new fields to group descriptor as a part of uninitialized group patch. __le16 bg_itable_unused; /* Unused inodes count */ __le16 bg_checksum; /* crc16(sb_uuid+group+desc) */ bg_itable_unused: If we have EXT4_BG_INODE_UNINIT not set in bg_flags then bg_itable_unused will give the offset within the inode table till the inodes are used. This can be used by fsck to skip list of inodes that are marked unused. bg_checksum: Now that we depend on bg_flags and bg_itable_unused to determine the block and inode usage, we need to make sure group descriptor is not corrupt. We add checksum to group descriptor to detect corruption. If the descriptor is found to be corrupt, we mark all the blocks and inodes in the group used. Signed-off-by: Avantika Mathur <mathur@us.ibm.com> Signed-off-by: Andreas Dilger <adilger@clusterfs.com> Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2007-10-16 22:38:25 +00:00
{
int offset = offsetof(struct ext4_group_desc, bg_checksum);
Ext4: Uninitialized Block Groups In pass1 of e2fsck, every inode table in the fileystem is scanned and checked, regardless of whether it is in use. This is this the most time consuming part of the filesystem check. The unintialized block group feature can greatly reduce e2fsck time by eliminating checking of uninitialized inodes. With this feature, there is a a high water mark of used inodes for each block group. Block and inode bitmaps can be uninitialized on disk via a flag in the group descriptor to avoid reading or scanning them at e2fsck time. A checksum of each group descriptor is used to ensure that corruption in the group descriptor's bit flags does not cause incorrect operation. The feature is enabled through a mkfs option mke2fs /dev/ -O uninit_groups A patch adding support for uninitialized block groups to e2fsprogs tools has been posted to the linux-ext4 mailing list. The patches have been stress tested with fsstress and fsx. In performance tests testing e2fsck time, we have seen that e2fsck time on ext3 grows linearly with the total number of inodes in the filesytem. In ext4 with the uninitialized block groups feature, the e2fsck time is constant, based solely on the number of used inodes rather than the total inode count. Since typical ext4 filesystems only use 1-10% of their inodes, this feature can greatly reduce e2fsck time for users. With performance improvement of 2-20 times, depending on how full the filesystem is. The attached graph shows the major improvements in e2fsck times in filesystems with a large total inode count, but few inodes in use. In each group descriptor if we have EXT4_BG_INODE_UNINIT set in bg_flags: Inode table is not initialized/used in this group. So we can skip the consistency check during fsck. EXT4_BG_BLOCK_UNINIT set in bg_flags: No block in the group is used. So we can skip the block bitmap verification for this group. We also add two new fields to group descriptor as a part of uninitialized group patch. __le16 bg_itable_unused; /* Unused inodes count */ __le16 bg_checksum; /* crc16(sb_uuid+group+desc) */ bg_itable_unused: If we have EXT4_BG_INODE_UNINIT not set in bg_flags then bg_itable_unused will give the offset within the inode table till the inodes are used. This can be used by fsck to skip list of inodes that are marked unused. bg_checksum: Now that we depend on bg_flags and bg_itable_unused to determine the block and inode usage, we need to make sure group descriptor is not corrupt. We add checksum to group descriptor to detect corruption. If the descriptor is found to be corrupt, we mark all the blocks and inodes in the group used. Signed-off-by: Avantika Mathur <mathur@us.ibm.com> Signed-off-by: Andreas Dilger <adilger@clusterfs.com> Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2007-10-16 22:38:25 +00:00
__u16 crc = 0;
__le32 le_group = cpu_to_le32(block_group);
struct ext4_sb_info *sbi = EXT4_SB(sb);
Ext4: Uninitialized Block Groups In pass1 of e2fsck, every inode table in the fileystem is scanned and checked, regardless of whether it is in use. This is this the most time consuming part of the filesystem check. The unintialized block group feature can greatly reduce e2fsck time by eliminating checking of uninitialized inodes. With this feature, there is a a high water mark of used inodes for each block group. Block and inode bitmaps can be uninitialized on disk via a flag in the group descriptor to avoid reading or scanning them at e2fsck time. A checksum of each group descriptor is used to ensure that corruption in the group descriptor's bit flags does not cause incorrect operation. The feature is enabled through a mkfs option mke2fs /dev/ -O uninit_groups A patch adding support for uninitialized block groups to e2fsprogs tools has been posted to the linux-ext4 mailing list. The patches have been stress tested with fsstress and fsx. In performance tests testing e2fsck time, we have seen that e2fsck time on ext3 grows linearly with the total number of inodes in the filesytem. In ext4 with the uninitialized block groups feature, the e2fsck time is constant, based solely on the number of used inodes rather than the total inode count. Since typical ext4 filesystems only use 1-10% of their inodes, this feature can greatly reduce e2fsck time for users. With performance improvement of 2-20 times, depending on how full the filesystem is. The attached graph shows the major improvements in e2fsck times in filesystems with a large total inode count, but few inodes in use. In each group descriptor if we have EXT4_BG_INODE_UNINIT set in bg_flags: Inode table is not initialized/used in this group. So we can skip the consistency check during fsck. EXT4_BG_BLOCK_UNINIT set in bg_flags: No block in the group is used. So we can skip the block bitmap verification for this group. We also add two new fields to group descriptor as a part of uninitialized group patch. __le16 bg_itable_unused; /* Unused inodes count */ __le16 bg_checksum; /* crc16(sb_uuid+group+desc) */ bg_itable_unused: If we have EXT4_BG_INODE_UNINIT not set in bg_flags then bg_itable_unused will give the offset within the inode table till the inodes are used. This can be used by fsck to skip list of inodes that are marked unused. bg_checksum: Now that we depend on bg_flags and bg_itable_unused to determine the block and inode usage, we need to make sure group descriptor is not corrupt. We add checksum to group descriptor to detect corruption. If the descriptor is found to be corrupt, we mark all the blocks and inodes in the group used. Signed-off-by: Avantika Mathur <mathur@us.ibm.com> Signed-off-by: Andreas Dilger <adilger@clusterfs.com> Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2007-10-16 22:38:25 +00:00
if (ext4_has_metadata_csum(sbi->s_sb)) {
/* Use new metadata_csum algorithm */
__u32 csum32;
__u16 dummy_csum = 0;
csum32 = ext4_chksum(sbi, sbi->s_csum_seed, (__u8 *)&le_group,
sizeof(le_group));
csum32 = ext4_chksum(sbi, csum32, (__u8 *)gdp, offset);
csum32 = ext4_chksum(sbi, csum32, (__u8 *)&dummy_csum,
sizeof(dummy_csum));
offset += sizeof(dummy_csum);
if (offset < sbi->s_desc_size)
csum32 = ext4_chksum(sbi, csum32, (__u8 *)gdp + offset,
sbi->s_desc_size - offset);
crc = csum32 & 0xFFFF;
goto out;
Ext4: Uninitialized Block Groups In pass1 of e2fsck, every inode table in the fileystem is scanned and checked, regardless of whether it is in use. This is this the most time consuming part of the filesystem check. The unintialized block group feature can greatly reduce e2fsck time by eliminating checking of uninitialized inodes. With this feature, there is a a high water mark of used inodes for each block group. Block and inode bitmaps can be uninitialized on disk via a flag in the group descriptor to avoid reading or scanning them at e2fsck time. A checksum of each group descriptor is used to ensure that corruption in the group descriptor's bit flags does not cause incorrect operation. The feature is enabled through a mkfs option mke2fs /dev/ -O uninit_groups A patch adding support for uninitialized block groups to e2fsprogs tools has been posted to the linux-ext4 mailing list. The patches have been stress tested with fsstress and fsx. In performance tests testing e2fsck time, we have seen that e2fsck time on ext3 grows linearly with the total number of inodes in the filesytem. In ext4 with the uninitialized block groups feature, the e2fsck time is constant, based solely on the number of used inodes rather than the total inode count. Since typical ext4 filesystems only use 1-10% of their inodes, this feature can greatly reduce e2fsck time for users. With performance improvement of 2-20 times, depending on how full the filesystem is. The attached graph shows the major improvements in e2fsck times in filesystems with a large total inode count, but few inodes in use. In each group descriptor if we have EXT4_BG_INODE_UNINIT set in bg_flags: Inode table is not initialized/used in this group. So we can skip the consistency check during fsck. EXT4_BG_BLOCK_UNINIT set in bg_flags: No block in the group is used. So we can skip the block bitmap verification for this group. We also add two new fields to group descriptor as a part of uninitialized group patch. __le16 bg_itable_unused; /* Unused inodes count */ __le16 bg_checksum; /* crc16(sb_uuid+group+desc) */ bg_itable_unused: If we have EXT4_BG_INODE_UNINIT not set in bg_flags then bg_itable_unused will give the offset within the inode table till the inodes are used. This can be used by fsck to skip list of inodes that are marked unused. bg_checksum: Now that we depend on bg_flags and bg_itable_unused to determine the block and inode usage, we need to make sure group descriptor is not corrupt. We add checksum to group descriptor to detect corruption. If the descriptor is found to be corrupt, we mark all the blocks and inodes in the group used. Signed-off-by: Avantika Mathur <mathur@us.ibm.com> Signed-off-by: Andreas Dilger <adilger@clusterfs.com> Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2007-10-16 22:38:25 +00:00
}
/* old crc16 code */
if (!ext4_has_feature_gdt_csum(sb))
return 0;
crc = crc16(~0, sbi->s_es->s_uuid, sizeof(sbi->s_es->s_uuid));
crc = crc16(crc, (__u8 *)&le_group, sizeof(le_group));
crc = crc16(crc, (__u8 *)gdp, offset);
offset += sizeof(gdp->bg_checksum); /* skip checksum */
/* for checksum of struct ext4_group_desc do the rest...*/
ext4: avoid a potential slab-out-of-bounds in ext4_group_desc_csum When modifying the block device while it is mounted by the filesystem, syzbot reported the following: BUG: KASAN: slab-out-of-bounds in crc16+0x206/0x280 lib/crc16.c:58 Read of size 1 at addr ffff888075f5c0a8 by task syz-executor.2/15586 CPU: 1 PID: 15586 Comm: syz-executor.2 Not tainted 6.2.0-rc5-syzkaller-00205-gc96618275234 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/12/2023 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x1b1/0x290 lib/dump_stack.c:106 print_address_description+0x74/0x340 mm/kasan/report.c:306 print_report+0x107/0x1f0 mm/kasan/report.c:417 kasan_report+0xcd/0x100 mm/kasan/report.c:517 crc16+0x206/0x280 lib/crc16.c:58 ext4_group_desc_csum+0x81b/0xb20 fs/ext4/super.c:3187 ext4_group_desc_csum_set+0x195/0x230 fs/ext4/super.c:3210 ext4_mb_clear_bb fs/ext4/mballoc.c:6027 [inline] ext4_free_blocks+0x191a/0x2810 fs/ext4/mballoc.c:6173 ext4_remove_blocks fs/ext4/extents.c:2527 [inline] ext4_ext_rm_leaf fs/ext4/extents.c:2710 [inline] ext4_ext_remove_space+0x24ef/0x46a0 fs/ext4/extents.c:2958 ext4_ext_truncate+0x177/0x220 fs/ext4/extents.c:4416 ext4_truncate+0xa6a/0xea0 fs/ext4/inode.c:4342 ext4_setattr+0x10c8/0x1930 fs/ext4/inode.c:5622 notify_change+0xe50/0x1100 fs/attr.c:482 do_truncate+0x200/0x2f0 fs/open.c:65 handle_truncate fs/namei.c:3216 [inline] do_open fs/namei.c:3561 [inline] path_openat+0x272b/0x2dd0 fs/namei.c:3714 do_filp_open+0x264/0x4f0 fs/namei.c:3741 do_sys_openat2+0x124/0x4e0 fs/open.c:1310 do_sys_open fs/open.c:1326 [inline] __do_sys_creat fs/open.c:1402 [inline] __se_sys_creat fs/open.c:1396 [inline] __x64_sys_creat+0x11f/0x160 fs/open.c:1396 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7f72f8a8c0c9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 f1 19 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f72f97e3168 EFLAGS: 00000246 ORIG_RAX: 0000000000000055 RAX: ffffffffffffffda RBX: 00007f72f8bac050 RCX: 00007f72f8a8c0c9 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000020000280 RBP: 00007f72f8ae7ae9 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007ffd165348bf R14: 00007f72f97e3300 R15: 0000000000022000 Replace le16_to_cpu(sbi->s_es->s_desc_size) with sbi->s_desc_size It reduces ext4's compiled text size, and makes the code more efficient (we remove an extra indirect reference and a potential byte swap on big endian systems), and there is no downside. It also avoids the potential KASAN / syzkaller failure, as a bonus. Reported-by: syzbot+fc51227e7100c9294894@syzkaller.appspotmail.com Reported-by: syzbot+8785e41224a3afd04321@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?id=70d28d11ab14bd7938f3e088365252aa923cff42 Link: https://syzkaller.appspot.com/bug?id=b85721b38583ecc6b5e72ff524c67302abbc30f3 Link: https://lore.kernel.org/all/000000000000ece18705f3b20934@google.com/ Fixes: 717d50e4971b ("Ext4: Uninitialized Block Groups") Cc: stable@vger.kernel.org Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org> Link: https://lore.kernel.org/r/20230504121525.3275886-1-tudor.ambarus@linaro.org Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2023-05-04 12:15:25 +00:00
if (ext4_has_feature_64bit(sb) && offset < sbi->s_desc_size)
crc = crc16(crc, (__u8 *)gdp + offset,
ext4: avoid a potential slab-out-of-bounds in ext4_group_desc_csum When modifying the block device while it is mounted by the filesystem, syzbot reported the following: BUG: KASAN: slab-out-of-bounds in crc16+0x206/0x280 lib/crc16.c:58 Read of size 1 at addr ffff888075f5c0a8 by task syz-executor.2/15586 CPU: 1 PID: 15586 Comm: syz-executor.2 Not tainted 6.2.0-rc5-syzkaller-00205-gc96618275234 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/12/2023 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x1b1/0x290 lib/dump_stack.c:106 print_address_description+0x74/0x340 mm/kasan/report.c:306 print_report+0x107/0x1f0 mm/kasan/report.c:417 kasan_report+0xcd/0x100 mm/kasan/report.c:517 crc16+0x206/0x280 lib/crc16.c:58 ext4_group_desc_csum+0x81b/0xb20 fs/ext4/super.c:3187 ext4_group_desc_csum_set+0x195/0x230 fs/ext4/super.c:3210 ext4_mb_clear_bb fs/ext4/mballoc.c:6027 [inline] ext4_free_blocks+0x191a/0x2810 fs/ext4/mballoc.c:6173 ext4_remove_blocks fs/ext4/extents.c:2527 [inline] ext4_ext_rm_leaf fs/ext4/extents.c:2710 [inline] ext4_ext_remove_space+0x24ef/0x46a0 fs/ext4/extents.c:2958 ext4_ext_truncate+0x177/0x220 fs/ext4/extents.c:4416 ext4_truncate+0xa6a/0xea0 fs/ext4/inode.c:4342 ext4_setattr+0x10c8/0x1930 fs/ext4/inode.c:5622 notify_change+0xe50/0x1100 fs/attr.c:482 do_truncate+0x200/0x2f0 fs/open.c:65 handle_truncate fs/namei.c:3216 [inline] do_open fs/namei.c:3561 [inline] path_openat+0x272b/0x2dd0 fs/namei.c:3714 do_filp_open+0x264/0x4f0 fs/namei.c:3741 do_sys_openat2+0x124/0x4e0 fs/open.c:1310 do_sys_open fs/open.c:1326 [inline] __do_sys_creat fs/open.c:1402 [inline] __se_sys_creat fs/open.c:1396 [inline] __x64_sys_creat+0x11f/0x160 fs/open.c:1396 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7f72f8a8c0c9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 f1 19 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f72f97e3168 EFLAGS: 00000246 ORIG_RAX: 0000000000000055 RAX: ffffffffffffffda RBX: 00007f72f8bac050 RCX: 00007f72f8a8c0c9 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000020000280 RBP: 00007f72f8ae7ae9 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007ffd165348bf R14: 00007f72f97e3300 R15: 0000000000022000 Replace le16_to_cpu(sbi->s_es->s_desc_size) with sbi->s_desc_size It reduces ext4's compiled text size, and makes the code more efficient (we remove an extra indirect reference and a potential byte swap on big endian systems), and there is no downside. It also avoids the potential KASAN / syzkaller failure, as a bonus. Reported-by: syzbot+fc51227e7100c9294894@syzkaller.appspotmail.com Reported-by: syzbot+8785e41224a3afd04321@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?id=70d28d11ab14bd7938f3e088365252aa923cff42 Link: https://syzkaller.appspot.com/bug?id=b85721b38583ecc6b5e72ff524c67302abbc30f3 Link: https://lore.kernel.org/all/000000000000ece18705f3b20934@google.com/ Fixes: 717d50e4971b ("Ext4: Uninitialized Block Groups") Cc: stable@vger.kernel.org Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org> Link: https://lore.kernel.org/r/20230504121525.3275886-1-tudor.ambarus@linaro.org Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2023-05-04 12:15:25 +00:00
sbi->s_desc_size - offset);
out:
Ext4: Uninitialized Block Groups In pass1 of e2fsck, every inode table in the fileystem is scanned and checked, regardless of whether it is in use. This is this the most time consuming part of the filesystem check. The unintialized block group feature can greatly reduce e2fsck time by eliminating checking of uninitialized inodes. With this feature, there is a a high water mark of used inodes for each block group. Block and inode bitmaps can be uninitialized on disk via a flag in the group descriptor to avoid reading or scanning them at e2fsck time. A checksum of each group descriptor is used to ensure that corruption in the group descriptor's bit flags does not cause incorrect operation. The feature is enabled through a mkfs option mke2fs /dev/ -O uninit_groups A patch adding support for uninitialized block groups to e2fsprogs tools has been posted to the linux-ext4 mailing list. The patches have been stress tested with fsstress and fsx. In performance tests testing e2fsck time, we have seen that e2fsck time on ext3 grows linearly with the total number of inodes in the filesytem. In ext4 with the uninitialized block groups feature, the e2fsck time is constant, based solely on the number of used inodes rather than the total inode count. Since typical ext4 filesystems only use 1-10% of their inodes, this feature can greatly reduce e2fsck time for users. With performance improvement of 2-20 times, depending on how full the filesystem is. The attached graph shows the major improvements in e2fsck times in filesystems with a large total inode count, but few inodes in use. In each group descriptor if we have EXT4_BG_INODE_UNINIT set in bg_flags: Inode table is not initialized/used in this group. So we can skip the consistency check during fsck. EXT4_BG_BLOCK_UNINIT set in bg_flags: No block in the group is used. So we can skip the block bitmap verification for this group. We also add two new fields to group descriptor as a part of uninitialized group patch. __le16 bg_itable_unused; /* Unused inodes count */ __le16 bg_checksum; /* crc16(sb_uuid+group+desc) */ bg_itable_unused: If we have EXT4_BG_INODE_UNINIT not set in bg_flags then bg_itable_unused will give the offset within the inode table till the inodes are used. This can be used by fsck to skip list of inodes that are marked unused. bg_checksum: Now that we depend on bg_flags and bg_itable_unused to determine the block and inode usage, we need to make sure group descriptor is not corrupt. We add checksum to group descriptor to detect corruption. If the descriptor is found to be corrupt, we mark all the blocks and inodes in the group used. Signed-off-by: Avantika Mathur <mathur@us.ibm.com> Signed-off-by: Andreas Dilger <adilger@clusterfs.com> Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2007-10-16 22:38:25 +00:00
return cpu_to_le16(crc);
}
int ext4_group_desc_csum_verify(struct super_block *sb, __u32 block_group,
Ext4: Uninitialized Block Groups In pass1 of e2fsck, every inode table in the fileystem is scanned and checked, regardless of whether it is in use. This is this the most time consuming part of the filesystem check. The unintialized block group feature can greatly reduce e2fsck time by eliminating checking of uninitialized inodes. With this feature, there is a a high water mark of used inodes for each block group. Block and inode bitmaps can be uninitialized on disk via a flag in the group descriptor to avoid reading or scanning them at e2fsck time. A checksum of each group descriptor is used to ensure that corruption in the group descriptor's bit flags does not cause incorrect operation. The feature is enabled through a mkfs option mke2fs /dev/ -O uninit_groups A patch adding support for uninitialized block groups to e2fsprogs tools has been posted to the linux-ext4 mailing list. The patches have been stress tested with fsstress and fsx. In performance tests testing e2fsck time, we have seen that e2fsck time on ext3 grows linearly with the total number of inodes in the filesytem. In ext4 with the uninitialized block groups feature, the e2fsck time is constant, based solely on the number of used inodes rather than the total inode count. Since typical ext4 filesystems only use 1-10% of their inodes, this feature can greatly reduce e2fsck time for users. With performance improvement of 2-20 times, depending on how full the filesystem is. The attached graph shows the major improvements in e2fsck times in filesystems with a large total inode count, but few inodes in use. In each group descriptor if we have EXT4_BG_INODE_UNINIT set in bg_flags: Inode table is not initialized/used in this group. So we can skip the consistency check during fsck. EXT4_BG_BLOCK_UNINIT set in bg_flags: No block in the group is used. So we can skip the block bitmap verification for this group. We also add two new fields to group descriptor as a part of uninitialized group patch. __le16 bg_itable_unused; /* Unused inodes count */ __le16 bg_checksum; /* crc16(sb_uuid+group+desc) */ bg_itable_unused: If we have EXT4_BG_INODE_UNINIT not set in bg_flags then bg_itable_unused will give the offset within the inode table till the inodes are used. This can be used by fsck to skip list of inodes that are marked unused. bg_checksum: Now that we depend on bg_flags and bg_itable_unused to determine the block and inode usage, we need to make sure group descriptor is not corrupt. We add checksum to group descriptor to detect corruption. If the descriptor is found to be corrupt, we mark all the blocks and inodes in the group used. Signed-off-by: Avantika Mathur <mathur@us.ibm.com> Signed-off-by: Andreas Dilger <adilger@clusterfs.com> Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2007-10-16 22:38:25 +00:00
struct ext4_group_desc *gdp)
{
if (ext4_has_group_desc_csum(sb) &&
(gdp->bg_checksum != ext4_group_desc_csum(sb, block_group, gdp)))
Ext4: Uninitialized Block Groups In pass1 of e2fsck, every inode table in the fileystem is scanned and checked, regardless of whether it is in use. This is this the most time consuming part of the filesystem check. The unintialized block group feature can greatly reduce e2fsck time by eliminating checking of uninitialized inodes. With this feature, there is a a high water mark of used inodes for each block group. Block and inode bitmaps can be uninitialized on disk via a flag in the group descriptor to avoid reading or scanning them at e2fsck time. A checksum of each group descriptor is used to ensure that corruption in the group descriptor's bit flags does not cause incorrect operation. The feature is enabled through a mkfs option mke2fs /dev/ -O uninit_groups A patch adding support for uninitialized block groups to e2fsprogs tools has been posted to the linux-ext4 mailing list. The patches have been stress tested with fsstress and fsx. In performance tests testing e2fsck time, we have seen that e2fsck time on ext3 grows linearly with the total number of inodes in the filesytem. In ext4 with the uninitialized block groups feature, the e2fsck time is constant, based solely on the number of used inodes rather than the total inode count. Since typical ext4 filesystems only use 1-10% of their inodes, this feature can greatly reduce e2fsck time for users. With performance improvement of 2-20 times, depending on how full the filesystem is. The attached graph shows the major improvements in e2fsck times in filesystems with a large total inode count, but few inodes in use. In each group descriptor if we have EXT4_BG_INODE_UNINIT set in bg_flags: Inode table is not initialized/used in this group. So we can skip the consistency check during fsck. EXT4_BG_BLOCK_UNINIT set in bg_flags: No block in the group is used. So we can skip the block bitmap verification for this group. We also add two new fields to group descriptor as a part of uninitialized group patch. __le16 bg_itable_unused; /* Unused inodes count */ __le16 bg_checksum; /* crc16(sb_uuid+group+desc) */ bg_itable_unused: If we have EXT4_BG_INODE_UNINIT not set in bg_flags then bg_itable_unused will give the offset within the inode table till the inodes are used. This can be used by fsck to skip list of inodes that are marked unused. bg_checksum: Now that we depend on bg_flags and bg_itable_unused to determine the block and inode usage, we need to make sure group descriptor is not corrupt. We add checksum to group descriptor to detect corruption. If the descriptor is found to be corrupt, we mark all the blocks and inodes in the group used. Signed-off-by: Avantika Mathur <mathur@us.ibm.com> Signed-off-by: Andreas Dilger <adilger@clusterfs.com> Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2007-10-16 22:38:25 +00:00
return 0;
return 1;
}
void ext4_group_desc_csum_set(struct super_block *sb, __u32 block_group,
struct ext4_group_desc *gdp)
{
if (!ext4_has_group_desc_csum(sb))
return;
gdp->bg_checksum = ext4_group_desc_csum(sb, block_group, gdp);
}
/* Called at mount-time, super-block is locked */
ext4: add support for lazy inode table initialization When the lazy_itable_init extended option is passed to mke2fs, it considerably speeds up filesystem creation because inode tables are not zeroed out. The fact that parts of the inode table are uninitialized is not a problem so long as the block group descriptors, which contain information regarding how much of the inode table has been initialized, has not been corrupted However, if the block group checksums are not valid, e2fsck must scan the entire inode table, and the the old, uninitialized data could potentially cause e2fsck to report false problems. Hence, it is important for the inode tables to be initialized as soon as possble. This commit adds this feature so that mke2fs can safely use the lazy inode table initialization feature to speed up formatting file systems. This is done via a new new kernel thread called ext4lazyinit, which is created on demand and destroyed, when it is no longer needed. There is only one thread for all ext4 filesystems in the system. When the first filesystem with inititable mount option is mounted, ext4lazyinit thread is created, then the filesystem can register its request in the request list. This thread then walks through the list of requests picking up scheduled requests and invoking ext4_init_inode_table(). Next schedule time for the request is computed by multiplying the time it took to zero out last inode table with wait multiplier, which can be set with the (init_itable=n) mount option (default is 10). We are doing this so we do not take the whole I/O bandwidth. When the thread is no longer necessary (request list is empty) it frees the appropriate structures and exits (and can be created later later by another filesystem). We do not disturb regular inode allocations in any way, it just do not care whether the inode table is, or is not zeroed. But when zeroing, we have to skip used inodes, obviously. Also we should prevent new inode allocations from the group, while zeroing is on the way. For that we take write alloc_sem lock in ext4_init_inode_table() and read alloc_sem in the ext4_claim_inode, so when we are unlucky and allocator hits the group which is currently being zeroed, it just has to wait. This can be suppresed using the mount option no_init_itable. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-28 01:30:05 +00:00
static int ext4_check_descriptors(struct super_block *sb,
ext4_fsblk_t sb_block,
ext4: add support for lazy inode table initialization When the lazy_itable_init extended option is passed to mke2fs, it considerably speeds up filesystem creation because inode tables are not zeroed out. The fact that parts of the inode table are uninitialized is not a problem so long as the block group descriptors, which contain information regarding how much of the inode table has been initialized, has not been corrupted However, if the block group checksums are not valid, e2fsck must scan the entire inode table, and the the old, uninitialized data could potentially cause e2fsck to report false problems. Hence, it is important for the inode tables to be initialized as soon as possble. This commit adds this feature so that mke2fs can safely use the lazy inode table initialization feature to speed up formatting file systems. This is done via a new new kernel thread called ext4lazyinit, which is created on demand and destroyed, when it is no longer needed. There is only one thread for all ext4 filesystems in the system. When the first filesystem with inititable mount option is mounted, ext4lazyinit thread is created, then the filesystem can register its request in the request list. This thread then walks through the list of requests picking up scheduled requests and invoking ext4_init_inode_table(). Next schedule time for the request is computed by multiplying the time it took to zero out last inode table with wait multiplier, which can be set with the (init_itable=n) mount option (default is 10). We are doing this so we do not take the whole I/O bandwidth. When the thread is no longer necessary (request list is empty) it frees the appropriate structures and exits (and can be created later later by another filesystem). We do not disturb regular inode allocations in any way, it just do not care whether the inode table is, or is not zeroed. But when zeroing, we have to skip used inodes, obviously. Also we should prevent new inode allocations from the group, while zeroing is on the way. For that we take write alloc_sem lock in ext4_init_inode_table() and read alloc_sem in the ext4_claim_inode, so when we are unlucky and allocator hits the group which is currently being zeroed, it just has to wait. This can be suppresed using the mount option no_init_itable. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-28 01:30:05 +00:00
ext4_group_t *first_not_zeroed)
{
struct ext4_sb_info *sbi = EXT4_SB(sb);
ext4_fsblk_t first_block = le32_to_cpu(sbi->s_es->s_first_data_block);
ext4_fsblk_t last_block;
ext4_fsblk_t last_bg_block = sb_block + ext4_bg_num_gdb(sb, 0);
ext4_fsblk_t block_bitmap;
ext4_fsblk_t inode_bitmap;
ext4_fsblk_t inode_table;
int flexbg_flag = 0;
ext4: add support for lazy inode table initialization When the lazy_itable_init extended option is passed to mke2fs, it considerably speeds up filesystem creation because inode tables are not zeroed out. The fact that parts of the inode table are uninitialized is not a problem so long as the block group descriptors, which contain information regarding how much of the inode table has been initialized, has not been corrupted However, if the block group checksums are not valid, e2fsck must scan the entire inode table, and the the old, uninitialized data could potentially cause e2fsck to report false problems. Hence, it is important for the inode tables to be initialized as soon as possble. This commit adds this feature so that mke2fs can safely use the lazy inode table initialization feature to speed up formatting file systems. This is done via a new new kernel thread called ext4lazyinit, which is created on demand and destroyed, when it is no longer needed. There is only one thread for all ext4 filesystems in the system. When the first filesystem with inititable mount option is mounted, ext4lazyinit thread is created, then the filesystem can register its request in the request list. This thread then walks through the list of requests picking up scheduled requests and invoking ext4_init_inode_table(). Next schedule time for the request is computed by multiplying the time it took to zero out last inode table with wait multiplier, which can be set with the (init_itable=n) mount option (default is 10). We are doing this so we do not take the whole I/O bandwidth. When the thread is no longer necessary (request list is empty) it frees the appropriate structures and exits (and can be created later later by another filesystem). We do not disturb regular inode allocations in any way, it just do not care whether the inode table is, or is not zeroed. But when zeroing, we have to skip used inodes, obviously. Also we should prevent new inode allocations from the group, while zeroing is on the way. For that we take write alloc_sem lock in ext4_init_inode_table() and read alloc_sem in the ext4_claim_inode, so when we are unlucky and allocator hits the group which is currently being zeroed, it just has to wait. This can be suppresed using the mount option no_init_itable. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-28 01:30:05 +00:00
ext4_group_t i, grp = sbi->s_groups_count;
if (ext4_has_feature_flex_bg(sb))
flexbg_flag = 1;
ext4_debug("Checking group descriptors");
for (i = 0; i < sbi->s_groups_count; i++) {
struct ext4_group_desc *gdp = ext4_get_group_desc(sb, i, NULL);
if (i == sbi->s_groups_count - 1 || flexbg_flag)
last_block = ext4_blocks_count(sbi->s_es) - 1;
else
last_block = first_block +
(EXT4_BLOCKS_PER_GROUP(sb) - 1);
ext4: add support for lazy inode table initialization When the lazy_itable_init extended option is passed to mke2fs, it considerably speeds up filesystem creation because inode tables are not zeroed out. The fact that parts of the inode table are uninitialized is not a problem so long as the block group descriptors, which contain information regarding how much of the inode table has been initialized, has not been corrupted However, if the block group checksums are not valid, e2fsck must scan the entire inode table, and the the old, uninitialized data could potentially cause e2fsck to report false problems. Hence, it is important for the inode tables to be initialized as soon as possble. This commit adds this feature so that mke2fs can safely use the lazy inode table initialization feature to speed up formatting file systems. This is done via a new new kernel thread called ext4lazyinit, which is created on demand and destroyed, when it is no longer needed. There is only one thread for all ext4 filesystems in the system. When the first filesystem with inititable mount option is mounted, ext4lazyinit thread is created, then the filesystem can register its request in the request list. This thread then walks through the list of requests picking up scheduled requests and invoking ext4_init_inode_table(). Next schedule time for the request is computed by multiplying the time it took to zero out last inode table with wait multiplier, which can be set with the (init_itable=n) mount option (default is 10). We are doing this so we do not take the whole I/O bandwidth. When the thread is no longer necessary (request list is empty) it frees the appropriate structures and exits (and can be created later later by another filesystem). We do not disturb regular inode allocations in any way, it just do not care whether the inode table is, or is not zeroed. But when zeroing, we have to skip used inodes, obviously. Also we should prevent new inode allocations from the group, while zeroing is on the way. For that we take write alloc_sem lock in ext4_init_inode_table() and read alloc_sem in the ext4_claim_inode, so when we are unlucky and allocator hits the group which is currently being zeroed, it just has to wait. This can be suppresed using the mount option no_init_itable. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-28 01:30:05 +00:00
if ((grp == sbi->s_groups_count) &&
!(gdp->bg_flags & cpu_to_le16(EXT4_BG_INODE_ZEROED)))
grp = i;
block_bitmap = ext4_block_bitmap(sb, gdp);
if (block_bitmap == sb_block) {
ext4_msg(sb, KERN_ERR, "ext4_check_descriptors: "
"Block bitmap for group %u overlaps "
"superblock", i);
if (!sb_rdonly(sb))
return 0;
}
if (block_bitmap >= sb_block + 1 &&
block_bitmap <= last_bg_block) {
ext4_msg(sb, KERN_ERR, "ext4_check_descriptors: "
"Block bitmap for group %u overlaps "
"block group descriptors", i);
if (!sb_rdonly(sb))
return 0;
}
if (block_bitmap < first_block || block_bitmap > last_block) {
ext4_msg(sb, KERN_ERR, "ext4_check_descriptors: "
"Block bitmap for group %u not in group "
"(block %llu)!", i, block_bitmap);
return 0;
}
inode_bitmap = ext4_inode_bitmap(sb, gdp);
if (inode_bitmap == sb_block) {
ext4_msg(sb, KERN_ERR, "ext4_check_descriptors: "
"Inode bitmap for group %u overlaps "
"superblock", i);
if (!sb_rdonly(sb))
return 0;
}
if (inode_bitmap >= sb_block + 1 &&
inode_bitmap <= last_bg_block) {
ext4_msg(sb, KERN_ERR, "ext4_check_descriptors: "
"Inode bitmap for group %u overlaps "
"block group descriptors", i);
if (!sb_rdonly(sb))
return 0;
}
if (inode_bitmap < first_block || inode_bitmap > last_block) {
ext4_msg(sb, KERN_ERR, "ext4_check_descriptors: "
"Inode bitmap for group %u not in group "
"(block %llu)!", i, inode_bitmap);
return 0;
}
inode_table = ext4_inode_table(sb, gdp);
if (inode_table == sb_block) {
ext4_msg(sb, KERN_ERR, "ext4_check_descriptors: "
"Inode table for group %u overlaps "
"superblock", i);
if (!sb_rdonly(sb))
return 0;
}
if (inode_table >= sb_block + 1 &&
inode_table <= last_bg_block) {
ext4_msg(sb, KERN_ERR, "ext4_check_descriptors: "
"Inode table for group %u overlaps "
"block group descriptors", i);
if (!sb_rdonly(sb))
return 0;
}
if (inode_table < first_block ||
inode_table + sbi->s_itb_per_group - 1 > last_block) {
ext4_msg(sb, KERN_ERR, "ext4_check_descriptors: "
"Inode table for group %u not in group "
"(block %llu)!", i, inode_table);
return 0;
}
ext4_lock_group(sb, i);
if (!ext4_group_desc_csum_verify(sb, i, gdp)) {
ext4_msg(sb, KERN_ERR, "ext4_check_descriptors: "
"Checksum for group %u failed (%u!=%u)",
i, le16_to_cpu(ext4_group_desc_csum(sb, i,
gdp)), le16_to_cpu(gdp->bg_checksum));
if (!sb_rdonly(sb)) {
ext4_unlock_group(sb, i);
return 0;
}
Ext4: Uninitialized Block Groups In pass1 of e2fsck, every inode table in the fileystem is scanned and checked, regardless of whether it is in use. This is this the most time consuming part of the filesystem check. The unintialized block group feature can greatly reduce e2fsck time by eliminating checking of uninitialized inodes. With this feature, there is a a high water mark of used inodes for each block group. Block and inode bitmaps can be uninitialized on disk via a flag in the group descriptor to avoid reading or scanning them at e2fsck time. A checksum of each group descriptor is used to ensure that corruption in the group descriptor's bit flags does not cause incorrect operation. The feature is enabled through a mkfs option mke2fs /dev/ -O uninit_groups A patch adding support for uninitialized block groups to e2fsprogs tools has been posted to the linux-ext4 mailing list. The patches have been stress tested with fsstress and fsx. In performance tests testing e2fsck time, we have seen that e2fsck time on ext3 grows linearly with the total number of inodes in the filesytem. In ext4 with the uninitialized block groups feature, the e2fsck time is constant, based solely on the number of used inodes rather than the total inode count. Since typical ext4 filesystems only use 1-10% of their inodes, this feature can greatly reduce e2fsck time for users. With performance improvement of 2-20 times, depending on how full the filesystem is. The attached graph shows the major improvements in e2fsck times in filesystems with a large total inode count, but few inodes in use. In each group descriptor if we have EXT4_BG_INODE_UNINIT set in bg_flags: Inode table is not initialized/used in this group. So we can skip the consistency check during fsck. EXT4_BG_BLOCK_UNINIT set in bg_flags: No block in the group is used. So we can skip the block bitmap verification for this group. We also add two new fields to group descriptor as a part of uninitialized group patch. __le16 bg_itable_unused; /* Unused inodes count */ __le16 bg_checksum; /* crc16(sb_uuid+group+desc) */ bg_itable_unused: If we have EXT4_BG_INODE_UNINIT not set in bg_flags then bg_itable_unused will give the offset within the inode table till the inodes are used. This can be used by fsck to skip list of inodes that are marked unused. bg_checksum: Now that we depend on bg_flags and bg_itable_unused to determine the block and inode usage, we need to make sure group descriptor is not corrupt. We add checksum to group descriptor to detect corruption. If the descriptor is found to be corrupt, we mark all the blocks and inodes in the group used. Signed-off-by: Avantika Mathur <mathur@us.ibm.com> Signed-off-by: Andreas Dilger <adilger@clusterfs.com> Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2007-10-16 22:38:25 +00:00
}
ext4_unlock_group(sb, i);
if (!flexbg_flag)
first_block += EXT4_BLOCKS_PER_GROUP(sb);
}
ext4: add support for lazy inode table initialization When the lazy_itable_init extended option is passed to mke2fs, it considerably speeds up filesystem creation because inode tables are not zeroed out. The fact that parts of the inode table are uninitialized is not a problem so long as the block group descriptors, which contain information regarding how much of the inode table has been initialized, has not been corrupted However, if the block group checksums are not valid, e2fsck must scan the entire inode table, and the the old, uninitialized data could potentially cause e2fsck to report false problems. Hence, it is important for the inode tables to be initialized as soon as possble. This commit adds this feature so that mke2fs can safely use the lazy inode table initialization feature to speed up formatting file systems. This is done via a new new kernel thread called ext4lazyinit, which is created on demand and destroyed, when it is no longer needed. There is only one thread for all ext4 filesystems in the system. When the first filesystem with inititable mount option is mounted, ext4lazyinit thread is created, then the filesystem can register its request in the request list. This thread then walks through the list of requests picking up scheduled requests and invoking ext4_init_inode_table(). Next schedule time for the request is computed by multiplying the time it took to zero out last inode table with wait multiplier, which can be set with the (init_itable=n) mount option (default is 10). We are doing this so we do not take the whole I/O bandwidth. When the thread is no longer necessary (request list is empty) it frees the appropriate structures and exits (and can be created later later by another filesystem). We do not disturb regular inode allocations in any way, it just do not care whether the inode table is, or is not zeroed. But when zeroing, we have to skip used inodes, obviously. Also we should prevent new inode allocations from the group, while zeroing is on the way. For that we take write alloc_sem lock in ext4_init_inode_table() and read alloc_sem in the ext4_claim_inode, so when we are unlucky and allocator hits the group which is currently being zeroed, it just has to wait. This can be suppresed using the mount option no_init_itable. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-28 01:30:05 +00:00
if (NULL != first_not_zeroed)
*first_not_zeroed = grp;
return 1;
}
/*
* Maximal extent format file size.
* Resulting logical blkno at s_maxbytes must fit in our on-disk
* extent format containers, within a sector_t, and within i_blocks
* in the vfs. ext4 inode has 48 bits of i_block in fsblock units,
* so that won't be a limiting factor.
*
ext4: Fix max file size and logical block counting of extent format file Kazuya Mio reported that he was able to hit BUG_ON(next == lblock) in ext4_ext_put_gap_in_cache() while creating a sparse file in extent format and fill the tail of file up to its end. We will hit the BUG_ON when we write the last block (2^32-1) into the sparse file. The root cause of the problem lies in the fact that we specifically set s_maxbytes so that block at s_maxbytes fit into on-disk extent format, which is 32 bit long. However, we are not storing start and end block number, but rather start block number and length in blocks. It means that in order to cover extent from 0 to EXT_MAX_BLOCK we need EXT_MAX_BLOCK+1 to fit into len (because we counting block 0 as well) - and it does not. The only way to fix it without changing the meaning of the struct ext4_extent members is, as Kazuya Mio suggested, to lower s_maxbytes by one fs block so we can cover the whole extent we can get by the on-disk extent format. Also in many places EXT_MAX_BLOCK is used as length instead of maximum logical block number as the name suggests, it is all a bit messy. So this commit renames it to EXT_MAX_BLOCKS and change its usage in some places to actually be maximum number of blocks in the extent. The bug which this commit fixes can be reproduced as follows: dd if=/dev/zero of=/mnt/mp1/file bs=<blocksize> count=1 seek=$((2**32-2)) sync dd if=/dev/zero of=/mnt/mp1/file bs=<blocksize> count=1 seek=$((2**32-1)) Reported-by: Kazuya Mio <k-mio@sx.jp.nec.com> Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-06-06 04:05:17 +00:00
* However there is other limiting factor. We do store extents in the form
* of starting block and length, hence the resulting length of the extent
* covering maximum file size must fit into on-disk format containers as
* well. Given that length is always by 1 unit bigger than max unit (because
* we count 0 as well) we have to lower the s_maxbytes by one fs block.
*
* Note, this does *not* consider any metadata overhead for vfs i_blocks.
*/
static loff_t ext4_max_size(int blkbits, int has_huge_files)
{
loff_t res;
loff_t upper_limit = MAX_LFS_FILESIZE;
BUILD_BUG_ON(sizeof(blkcnt_t) < sizeof(u64));
if (!has_huge_files) {
upper_limit = (1LL << 32) - 1;
/* total blocks in file system block size */
upper_limit >>= (blkbits - 9);
upper_limit <<= blkbits;
}
ext4: Fix max file size and logical block counting of extent format file Kazuya Mio reported that he was able to hit BUG_ON(next == lblock) in ext4_ext_put_gap_in_cache() while creating a sparse file in extent format and fill the tail of file up to its end. We will hit the BUG_ON when we write the last block (2^32-1) into the sparse file. The root cause of the problem lies in the fact that we specifically set s_maxbytes so that block at s_maxbytes fit into on-disk extent format, which is 32 bit long. However, we are not storing start and end block number, but rather start block number and length in blocks. It means that in order to cover extent from 0 to EXT_MAX_BLOCK we need EXT_MAX_BLOCK+1 to fit into len (because we counting block 0 as well) - and it does not. The only way to fix it without changing the meaning of the struct ext4_extent members is, as Kazuya Mio suggested, to lower s_maxbytes by one fs block so we can cover the whole extent we can get by the on-disk extent format. Also in many places EXT_MAX_BLOCK is used as length instead of maximum logical block number as the name suggests, it is all a bit messy. So this commit renames it to EXT_MAX_BLOCKS and change its usage in some places to actually be maximum number of blocks in the extent. The bug which this commit fixes can be reproduced as follows: dd if=/dev/zero of=/mnt/mp1/file bs=<blocksize> count=1 seek=$((2**32-2)) sync dd if=/dev/zero of=/mnt/mp1/file bs=<blocksize> count=1 seek=$((2**32-1)) Reported-by: Kazuya Mio <k-mio@sx.jp.nec.com> Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-06-06 04:05:17 +00:00
/*
* 32-bit extent-start container, ee_block. We lower the maxbytes
* by one fs block, so ee_len can cover the extent of maximum file
* size
*/
res = (1LL << 32) - 1;
res <<= blkbits;
/* Sanity check against vm- & vfs- imposed limits */
if (res > upper_limit)
res = upper_limit;
return res;
}
/*
* Maximal bitmap file size. There is a direct, and {,double-,triple-}indirect
* block limit, and also a limit of (2^48 - 1) 512-byte sectors in i_blocks.
* We need to be 1 filesystem block less than the 2^48 sector limit.
*/
static loff_t ext4_max_bitmap_size(int bits, int has_huge_files)
{
loff_t upper_limit, res = EXT4_NDIR_BLOCKS;
int meta_blocks;
unsigned int ppb = 1 << (bits - 2);
/*
* This is calculated to be the largest file size for a dense, block
* mapped file such that the file's total number of 512-byte sectors,
* including data and all indirect blocks, does not exceed (2^48 - 1).
*
* __u32 i_blocks_lo and _u16 i_blocks_high represent the total
* number of 512-byte sectors of the file.
*/
if (!has_huge_files) {
/*
* !has_huge_files or implies that the inode i_block field
* represents total file blocks in 2^32 512-byte sectors ==
* size of vfs inode i_blocks * 8
*/
upper_limit = (1LL << 32) - 1;
/* total blocks in file system block size */
upper_limit >>= (bits - 9);
} else {
/*
* We use 48 bit ext4_inode i_blocks
* With EXT4_HUGE_FILE_FL set the i_blocks
* represent total number of blocks in
* file system block size
*/
upper_limit = (1LL << 48) - 1;
}
/* Compute how many blocks we can address by block tree */
res += ppb;
res += ppb * ppb;
res += ((loff_t)ppb) * ppb * ppb;
/* Compute how many metadata blocks are needed */
meta_blocks = 1;
meta_blocks += 1 + ppb;
meta_blocks += 1 + ppb + ppb * ppb;
/* Does block tree limit file size? */
if (res + meta_blocks <= upper_limit)
goto check_lfs;
res = upper_limit;
/* How many metadata blocks are needed for addressing upper_limit? */
upper_limit -= EXT4_NDIR_BLOCKS;
/* indirect blocks */
meta_blocks = 1;
upper_limit -= ppb;
/* double indirect blocks */
if (upper_limit < ppb * ppb) {
meta_blocks += 1 + DIV_ROUND_UP_ULL(upper_limit, ppb);
res -= meta_blocks;
goto check_lfs;
}
meta_blocks += 1 + ppb;
upper_limit -= ppb * ppb;
/* tripple indirect blocks for the rest */
meta_blocks += 1 + DIV_ROUND_UP_ULL(upper_limit, ppb) +
DIV_ROUND_UP_ULL(upper_limit, ppb*ppb);
res -= meta_blocks;
check_lfs:
res <<= bits;
if (res > MAX_LFS_FILESIZE)
res = MAX_LFS_FILESIZE;
return res;
}
static ext4_fsblk_t descriptor_loc(struct super_block *sb,
ext4_fsblk_t logical_sb_block, int nr)
{
struct ext4_sb_info *sbi = EXT4_SB(sb);
ext4_group_t bg, first_meta_bg;
int has_super = 0;
first_meta_bg = le32_to_cpu(sbi->s_es->s_first_meta_bg);
if (!ext4_has_feature_meta_bg(sb) || nr < first_meta_bg)
return logical_sb_block + nr + 1;
bg = sbi->s_desc_per_block * nr;
if (ext4_bg_has_super(sb, bg))
has_super = 1;
/*
* If we have a meta_bg fs with 1k blocks, group 0's GDT is at
* block 2, not 1. If s_first_data_block == 0 (bigalloc is enabled
* on modern mke2fs or blksize > 1k on older mke2fs) then we must
* compensate.
*/
if (sb->s_blocksize == 1024 && nr == 0 &&
le32_to_cpu(sbi->s_es->s_first_data_block) == 0)
has_super++;
return (has_super + ext4_group_first_block_no(sb, bg));
}
/**
* ext4_get_stripe_size: Get the stripe size.
* @sbi: In memory super block info
*
* If we have specified it via mount option, then
* use the mount option value. If the value specified at mount time is
* greater than the blocks per group use the super block value.
* If the super block value is greater than blocks per group return 0.
* Allocator needs it be less than blocks per group.
*
*/
static unsigned long ext4_get_stripe_size(struct ext4_sb_info *sbi)
{
unsigned long stride = le16_to_cpu(sbi->s_es->s_raid_stride);
unsigned long stripe_width =
le32_to_cpu(sbi->s_es->s_raid_stripe_width);
int ret;
if (sbi->s_stripe && sbi->s_stripe <= sbi->s_blocks_per_group)
ret = sbi->s_stripe;
else if (stripe_width && stripe_width <= sbi->s_blocks_per_group)
ret = stripe_width;
else if (stride && stride <= sbi->s_blocks_per_group)
ret = stride;
else
ret = 0;
/*
* If the stripe width is 1, this makes no sense and
* we set it to 0 to turn off stripe handling code.
*/
if (ret <= 1)
ret = 0;
return ret;
}
/*
* Check whether this filesystem can be mounted based on
* the features present and the RDONLY/RDWR mount requested.
* Returns 1 if this filesystem can be mounted as requested,
* 0 if it cannot be.
*/
int ext4_feature_set_ok(struct super_block *sb, int readonly)
{
if (ext4_has_unknown_ext4_incompat_features(sb)) {
ext4_msg(sb, KERN_ERR,
"Couldn't mount because of "
"unsupported optional features (%x)",
(le32_to_cpu(EXT4_SB(sb)->s_es->s_feature_incompat) &
~EXT4_FEATURE_INCOMPAT_SUPP));
return 0;
}
#if !IS_ENABLED(CONFIG_UNICODE)
if (ext4_has_feature_casefold(sb)) {
ext4_msg(sb, KERN_ERR,
"Filesystem with casefold feature cannot be "
"mounted without CONFIG_UNICODE");
return 0;
}
#endif
if (readonly)
return 1;
if (ext4_has_feature_readonly(sb)) {
ext4_msg(sb, KERN_INFO, "filesystem is read-only");
Rename superblock flags (MS_xyz -> SB_xyz) This is a pure automated search-and-replace of the internal kernel superblock flags. The s_flags are now called SB_*, with the names and the values for the moment mirroring the MS_* flags that they're equivalent to. Note how the MS_xyz flags are the ones passed to the mount system call, while the SB_xyz flags are what we then use in sb->s_flags. The script to do this was: # places to look in; re security/*: it generally should *not* be # touched (that stuff parses mount(2) arguments directly), but # there are two places where we really deal with superblock flags. FILES="drivers/mtd drivers/staging/lustre fs ipc mm \ include/linux/fs.h include/uapi/linux/bfs_fs.h \ security/apparmor/apparmorfs.c security/apparmor/include/lib.h" # the list of MS_... constants SYMS="RDONLY NOSUID NODEV NOEXEC SYNCHRONOUS REMOUNT MANDLOCK \ DIRSYNC NOATIME NODIRATIME BIND MOVE REC VERBOSE SILENT \ POSIXACL UNBINDABLE PRIVATE SLAVE SHARED RELATIME KERNMOUNT \ I_VERSION STRICTATIME LAZYTIME SUBMOUNT NOREMOTELOCK NOSEC BORN \ ACTIVE NOUSER" SED_PROG= for i in $SYMS; do SED_PROG="$SED_PROG -e s/MS_$i/SB_$i/g"; done # we want files that contain at least one of MS_..., # with fs/namespace.c and fs/pnode.c excluded. L=$(for i in $SYMS; do git grep -w -l MS_$i $FILES; done| sort|uniq|grep -v '^fs/namespace.c'|grep -v '^fs/pnode.c') for f in $L; do sed -i $f $SED_PROG; done Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-27 21:05:09 +00:00
sb->s_flags |= SB_RDONLY;
return 1;
}
/* Check that feature set is OK for a read-write mount */
if (ext4_has_unknown_ext4_ro_compat_features(sb)) {
ext4_msg(sb, KERN_ERR, "couldn't mount RDWR because of "
"unsupported optional features (%x)",
(le32_to_cpu(EXT4_SB(sb)->s_es->s_feature_ro_compat) &
~EXT4_FEATURE_RO_COMPAT_SUPP));
return 0;
}
if (ext4_has_feature_bigalloc(sb) && !ext4_has_feature_extents(sb)) {
ext4_msg(sb, KERN_ERR,
"Can't support bigalloc feature without "
"extents feature\n");
return 0;
}
ext4: make quota as first class supported feature This patch adds support for quotas as a first class feature in ext4; which is to say, the quota files are stored in hidden inodes as file system metadata, instead of as separate files visible in the file system directory hierarchy. It is based on the proposal at: https://ext4.wiki.kernel.org/index.php/Design_For_1st_Class_Quota_in_Ext4 This patch introduces a new feature - EXT4_FEATURE_RO_COMPAT_QUOTA which, when turned on, enables quota accounting at mount time iteself. Also, the quota inodes are stored in two additional superblock fields. Some changes introduced by this patch that should be pointed out are: 1) Two new ext4-superblock fields - s_usr_quota_inum and s_grp_quota_inum for storing the quota inodes in use. 2) Default quota inodes are: inode#3 for tracking userquota and inode#4 for tracking group quota. The superblock fields can be set to use other inodes as well. 3) If the QUOTA feature and corresponding quota inodes are set in superblock, the quota usage tracking is turned on at mount time. On 'quotaon' ioctl, the quota limits enforcement is turned on. 'quotaoff' ioctl turns off only the limits enforcement in this case. 4) When QUOTA feature is in use, the quota mount options 'quota', 'usrquota', 'grpquota' are ignored by the kernel. 5) mke2fs or tune2fs can be used to set the QUOTA feature and initialize quota inodes. The default reserved inodes will not be visible to user as regular files. 6) The quota-tools will need to be modified to support hidden quota files on ext4. E2fsprogs will also include support for creating and fixing quota files. 7) Support is only for the new V2 quota file format. Tested-by: Jan Kara <jack@suse.cz> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Johann Lombardi <johann@whamcloud.com> Signed-off-by: Aditya Kali <adityakali@google.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-07-23 00:21:31 +00:00
#if !IS_ENABLED(CONFIG_QUOTA) || !IS_ENABLED(CONFIG_QFMT_V2)
if (!readonly && (ext4_has_feature_quota(sb) ||
ext4_has_feature_project(sb))) {
ext4: make quota as first class supported feature This patch adds support for quotas as a first class feature in ext4; which is to say, the quota files are stored in hidden inodes as file system metadata, instead of as separate files visible in the file system directory hierarchy. It is based on the proposal at: https://ext4.wiki.kernel.org/index.php/Design_For_1st_Class_Quota_in_Ext4 This patch introduces a new feature - EXT4_FEATURE_RO_COMPAT_QUOTA which, when turned on, enables quota accounting at mount time iteself. Also, the quota inodes are stored in two additional superblock fields. Some changes introduced by this patch that should be pointed out are: 1) Two new ext4-superblock fields - s_usr_quota_inum and s_grp_quota_inum for storing the quota inodes in use. 2) Default quota inodes are: inode#3 for tracking userquota and inode#4 for tracking group quota. The superblock fields can be set to use other inodes as well. 3) If the QUOTA feature and corresponding quota inodes are set in superblock, the quota usage tracking is turned on at mount time. On 'quotaon' ioctl, the quota limits enforcement is turned on. 'quotaoff' ioctl turns off only the limits enforcement in this case. 4) When QUOTA feature is in use, the quota mount options 'quota', 'usrquota', 'grpquota' are ignored by the kernel. 5) mke2fs or tune2fs can be used to set the QUOTA feature and initialize quota inodes. The default reserved inodes will not be visible to user as regular files. 6) The quota-tools will need to be modified to support hidden quota files on ext4. E2fsprogs will also include support for creating and fixing quota files. 7) Support is only for the new V2 quota file format. Tested-by: Jan Kara <jack@suse.cz> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Johann Lombardi <johann@whamcloud.com> Signed-off-by: Aditya Kali <adityakali@google.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-07-23 00:21:31 +00:00
ext4_msg(sb, KERN_ERR,
"The kernel was not built with CONFIG_QUOTA and CONFIG_QFMT_V2");
return 0;
}
ext4: make quota as first class supported feature This patch adds support for quotas as a first class feature in ext4; which is to say, the quota files are stored in hidden inodes as file system metadata, instead of as separate files visible in the file system directory hierarchy. It is based on the proposal at: https://ext4.wiki.kernel.org/index.php/Design_For_1st_Class_Quota_in_Ext4 This patch introduces a new feature - EXT4_FEATURE_RO_COMPAT_QUOTA which, when turned on, enables quota accounting at mount time iteself. Also, the quota inodes are stored in two additional superblock fields. Some changes introduced by this patch that should be pointed out are: 1) Two new ext4-superblock fields - s_usr_quota_inum and s_grp_quota_inum for storing the quota inodes in use. 2) Default quota inodes are: inode#3 for tracking userquota and inode#4 for tracking group quota. The superblock fields can be set to use other inodes as well. 3) If the QUOTA feature and corresponding quota inodes are set in superblock, the quota usage tracking is turned on at mount time. On 'quotaon' ioctl, the quota limits enforcement is turned on. 'quotaoff' ioctl turns off only the limits enforcement in this case. 4) When QUOTA feature is in use, the quota mount options 'quota', 'usrquota', 'grpquota' are ignored by the kernel. 5) mke2fs or tune2fs can be used to set the QUOTA feature and initialize quota inodes. The default reserved inodes will not be visible to user as regular files. 6) The quota-tools will need to be modified to support hidden quota files on ext4. E2fsprogs will also include support for creating and fixing quota files. 7) Support is only for the new V2 quota file format. Tested-by: Jan Kara <jack@suse.cz> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Johann Lombardi <johann@whamcloud.com> Signed-off-by: Aditya Kali <adityakali@google.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-07-23 00:21:31 +00:00
#endif /* CONFIG_QUOTA */
return 1;
}
/*
* This function is called once a day if we have errors logged
* on the file system
*/
static void print_daily_error_info(struct timer_list *t)
{
struct ext4_sb_info *sbi = from_timer(sbi, t, s_err_report);
struct super_block *sb = sbi->s_sb;
struct ext4_super_block *es = sbi->s_es;
if (es->s_error_count)
/* fsck newer than v1.41.13 is needed to clean this condition. */
ext4_msg(sb, KERN_NOTICE, "error count since last fsck: %u",
le32_to_cpu(es->s_error_count));
if (es->s_first_error_time) {
printk(KERN_NOTICE "EXT4-fs (%s): initial error at time %llu: %.*s:%d",
sb->s_id,
ext4_get_tstamp(es, s_first_error_time),
(int) sizeof(es->s_first_error_func),
es->s_first_error_func,
le32_to_cpu(es->s_first_error_line));
if (es->s_first_error_ino)
printk(KERN_CONT ": inode %u",
le32_to_cpu(es->s_first_error_ino));
if (es->s_first_error_block)
printk(KERN_CONT ": block %llu", (unsigned long long)
le64_to_cpu(es->s_first_error_block));
printk(KERN_CONT "\n");
}
if (es->s_last_error_time) {
printk(KERN_NOTICE "EXT4-fs (%s): last error at time %llu: %.*s:%d",
sb->s_id,
ext4_get_tstamp(es, s_last_error_time),
(int) sizeof(es->s_last_error_func),
es->s_last_error_func,
le32_to_cpu(es->s_last_error_line));
if (es->s_last_error_ino)
printk(KERN_CONT ": inode %u",
le32_to_cpu(es->s_last_error_ino));
if (es->s_last_error_block)
printk(KERN_CONT ": block %llu", (unsigned long long)
le64_to_cpu(es->s_last_error_block));
printk(KERN_CONT "\n");
}
mod_timer(&sbi->s_err_report, jiffies + 24*60*60*HZ); /* Once a day */
}
ext4: add support for lazy inode table initialization When the lazy_itable_init extended option is passed to mke2fs, it considerably speeds up filesystem creation because inode tables are not zeroed out. The fact that parts of the inode table are uninitialized is not a problem so long as the block group descriptors, which contain information regarding how much of the inode table has been initialized, has not been corrupted However, if the block group checksums are not valid, e2fsck must scan the entire inode table, and the the old, uninitialized data could potentially cause e2fsck to report false problems. Hence, it is important for the inode tables to be initialized as soon as possble. This commit adds this feature so that mke2fs can safely use the lazy inode table initialization feature to speed up formatting file systems. This is done via a new new kernel thread called ext4lazyinit, which is created on demand and destroyed, when it is no longer needed. There is only one thread for all ext4 filesystems in the system. When the first filesystem with inititable mount option is mounted, ext4lazyinit thread is created, then the filesystem can register its request in the request list. This thread then walks through the list of requests picking up scheduled requests and invoking ext4_init_inode_table(). Next schedule time for the request is computed by multiplying the time it took to zero out last inode table with wait multiplier, which can be set with the (init_itable=n) mount option (default is 10). We are doing this so we do not take the whole I/O bandwidth. When the thread is no longer necessary (request list is empty) it frees the appropriate structures and exits (and can be created later later by another filesystem). We do not disturb regular inode allocations in any way, it just do not care whether the inode table is, or is not zeroed. But when zeroing, we have to skip used inodes, obviously. Also we should prevent new inode allocations from the group, while zeroing is on the way. For that we take write alloc_sem lock in ext4_init_inode_table() and read alloc_sem in the ext4_claim_inode, so when we are unlucky and allocator hits the group which is currently being zeroed, it just has to wait. This can be suppresed using the mount option no_init_itable. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-28 01:30:05 +00:00
/* Find next suitable group and run ext4_init_inode_table */
static int ext4_run_li_request(struct ext4_li_request *elr)
{
struct ext4_group_desc *gdp = NULL;
struct super_block *sb = elr->lr_super;
ext4_group_t ngroups = EXT4_SB(sb)->s_groups_count;
ext4_group_t group = elr->lr_next_group;
unsigned int prefetch_ios = 0;
ext4: add support for lazy inode table initialization When the lazy_itable_init extended option is passed to mke2fs, it considerably speeds up filesystem creation because inode tables are not zeroed out. The fact that parts of the inode table are uninitialized is not a problem so long as the block group descriptors, which contain information regarding how much of the inode table has been initialized, has not been corrupted However, if the block group checksums are not valid, e2fsck must scan the entire inode table, and the the old, uninitialized data could potentially cause e2fsck to report false problems. Hence, it is important for the inode tables to be initialized as soon as possble. This commit adds this feature so that mke2fs can safely use the lazy inode table initialization feature to speed up formatting file systems. This is done via a new new kernel thread called ext4lazyinit, which is created on demand and destroyed, when it is no longer needed. There is only one thread for all ext4 filesystems in the system. When the first filesystem with inititable mount option is mounted, ext4lazyinit thread is created, then the filesystem can register its request in the request list. This thread then walks through the list of requests picking up scheduled requests and invoking ext4_init_inode_table(). Next schedule time for the request is computed by multiplying the time it took to zero out last inode table with wait multiplier, which can be set with the (init_itable=n) mount option (default is 10). We are doing this so we do not take the whole I/O bandwidth. When the thread is no longer necessary (request list is empty) it frees the appropriate structures and exits (and can be created later later by another filesystem). We do not disturb regular inode allocations in any way, it just do not care whether the inode table is, or is not zeroed. But when zeroing, we have to skip used inodes, obviously. Also we should prevent new inode allocations from the group, while zeroing is on the way. For that we take write alloc_sem lock in ext4_init_inode_table() and read alloc_sem in the ext4_claim_inode, so when we are unlucky and allocator hits the group which is currently being zeroed, it just has to wait. This can be suppresed using the mount option no_init_itable. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-28 01:30:05 +00:00
int ret = 0;
int nr = EXT4_SB(sb)->s_mb_prefetch;
u64 start_time;
ext4: add support for lazy inode table initialization When the lazy_itable_init extended option is passed to mke2fs, it considerably speeds up filesystem creation because inode tables are not zeroed out. The fact that parts of the inode table are uninitialized is not a problem so long as the block group descriptors, which contain information regarding how much of the inode table has been initialized, has not been corrupted However, if the block group checksums are not valid, e2fsck must scan the entire inode table, and the the old, uninitialized data could potentially cause e2fsck to report false problems. Hence, it is important for the inode tables to be initialized as soon as possble. This commit adds this feature so that mke2fs can safely use the lazy inode table initialization feature to speed up formatting file systems. This is done via a new new kernel thread called ext4lazyinit, which is created on demand and destroyed, when it is no longer needed. There is only one thread for all ext4 filesystems in the system. When the first filesystem with inititable mount option is mounted, ext4lazyinit thread is created, then the filesystem can register its request in the request list. This thread then walks through the list of requests picking up scheduled requests and invoking ext4_init_inode_table(). Next schedule time for the request is computed by multiplying the time it took to zero out last inode table with wait multiplier, which can be set with the (init_itable=n) mount option (default is 10). We are doing this so we do not take the whole I/O bandwidth. When the thread is no longer necessary (request list is empty) it frees the appropriate structures and exits (and can be created later later by another filesystem). We do not disturb regular inode allocations in any way, it just do not care whether the inode table is, or is not zeroed. But when zeroing, we have to skip used inodes, obviously. Also we should prevent new inode allocations from the group, while zeroing is on the way. For that we take write alloc_sem lock in ext4_init_inode_table() and read alloc_sem in the ext4_claim_inode, so when we are unlucky and allocator hits the group which is currently being zeroed, it just has to wait. This can be suppresed using the mount option no_init_itable. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-28 01:30:05 +00:00
if (elr->lr_mode == EXT4_LI_MODE_PREFETCH_BBITMAP) {
elr->lr_next_group = ext4_mb_prefetch(sb, group, nr, &prefetch_ios);
ext4_mb_prefetch_fini(sb, elr->lr_next_group, nr);
trace_ext4_prefetch_bitmaps(sb, group, elr->lr_next_group, nr);
if (group >= elr->lr_next_group) {
ret = 1;
if (elr->lr_first_not_zeroed != ngroups &&
!sb_rdonly(sb) && test_opt(sb, INIT_INODE_TABLE)) {
elr->lr_next_group = elr->lr_first_not_zeroed;
elr->lr_mode = EXT4_LI_MODE_ITABLE;
ret = 0;
}
}
return ret;
}
ext4: add support for lazy inode table initialization When the lazy_itable_init extended option is passed to mke2fs, it considerably speeds up filesystem creation because inode tables are not zeroed out. The fact that parts of the inode table are uninitialized is not a problem so long as the block group descriptors, which contain information regarding how much of the inode table has been initialized, has not been corrupted However, if the block group checksums are not valid, e2fsck must scan the entire inode table, and the the old, uninitialized data could potentially cause e2fsck to report false problems. Hence, it is important for the inode tables to be initialized as soon as possble. This commit adds this feature so that mke2fs can safely use the lazy inode table initialization feature to speed up formatting file systems. This is done via a new new kernel thread called ext4lazyinit, which is created on demand and destroyed, when it is no longer needed. There is only one thread for all ext4 filesystems in the system. When the first filesystem with inititable mount option is mounted, ext4lazyinit thread is created, then the filesystem can register its request in the request list. This thread then walks through the list of requests picking up scheduled requests and invoking ext4_init_inode_table(). Next schedule time for the request is computed by multiplying the time it took to zero out last inode table with wait multiplier, which can be set with the (init_itable=n) mount option (default is 10). We are doing this so we do not take the whole I/O bandwidth. When the thread is no longer necessary (request list is empty) it frees the appropriate structures and exits (and can be created later later by another filesystem). We do not disturb regular inode allocations in any way, it just do not care whether the inode table is, or is not zeroed. But when zeroing, we have to skip used inodes, obviously. Also we should prevent new inode allocations from the group, while zeroing is on the way. For that we take write alloc_sem lock in ext4_init_inode_table() and read alloc_sem in the ext4_claim_inode, so when we are unlucky and allocator hits the group which is currently being zeroed, it just has to wait. This can be suppresed using the mount option no_init_itable. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-28 01:30:05 +00:00
for (; group < ngroups; group++) {
ext4: add support for lazy inode table initialization When the lazy_itable_init extended option is passed to mke2fs, it considerably speeds up filesystem creation because inode tables are not zeroed out. The fact that parts of the inode table are uninitialized is not a problem so long as the block group descriptors, which contain information regarding how much of the inode table has been initialized, has not been corrupted However, if the block group checksums are not valid, e2fsck must scan the entire inode table, and the the old, uninitialized data could potentially cause e2fsck to report false problems. Hence, it is important for the inode tables to be initialized as soon as possble. This commit adds this feature so that mke2fs can safely use the lazy inode table initialization feature to speed up formatting file systems. This is done via a new new kernel thread called ext4lazyinit, which is created on demand and destroyed, when it is no longer needed. There is only one thread for all ext4 filesystems in the system. When the first filesystem with inititable mount option is mounted, ext4lazyinit thread is created, then the filesystem can register its request in the request list. This thread then walks through the list of requests picking up scheduled requests and invoking ext4_init_inode_table(). Next schedule time for the request is computed by multiplying the time it took to zero out last inode table with wait multiplier, which can be set with the (init_itable=n) mount option (default is 10). We are doing this so we do not take the whole I/O bandwidth. When the thread is no longer necessary (request list is empty) it frees the appropriate structures and exits (and can be created later later by another filesystem). We do not disturb regular inode allocations in any way, it just do not care whether the inode table is, or is not zeroed. But when zeroing, we have to skip used inodes, obviously. Also we should prevent new inode allocations from the group, while zeroing is on the way. For that we take write alloc_sem lock in ext4_init_inode_table() and read alloc_sem in the ext4_claim_inode, so when we are unlucky and allocator hits the group which is currently being zeroed, it just has to wait. This can be suppresed using the mount option no_init_itable. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-28 01:30:05 +00:00
gdp = ext4_get_group_desc(sb, group, NULL);
if (!gdp) {
ret = 1;
break;
}
if (!(gdp->bg_flags & cpu_to_le16(EXT4_BG_INODE_ZEROED)))
break;
}
if (group >= ngroups)
ext4: add support for lazy inode table initialization When the lazy_itable_init extended option is passed to mke2fs, it considerably speeds up filesystem creation because inode tables are not zeroed out. The fact that parts of the inode table are uninitialized is not a problem so long as the block group descriptors, which contain information regarding how much of the inode table has been initialized, has not been corrupted However, if the block group checksums are not valid, e2fsck must scan the entire inode table, and the the old, uninitialized data could potentially cause e2fsck to report false problems. Hence, it is important for the inode tables to be initialized as soon as possble. This commit adds this feature so that mke2fs can safely use the lazy inode table initialization feature to speed up formatting file systems. This is done via a new new kernel thread called ext4lazyinit, which is created on demand and destroyed, when it is no longer needed. There is only one thread for all ext4 filesystems in the system. When the first filesystem with inititable mount option is mounted, ext4lazyinit thread is created, then the filesystem can register its request in the request list. This thread then walks through the list of requests picking up scheduled requests and invoking ext4_init_inode_table(). Next schedule time for the request is computed by multiplying the time it took to zero out last inode table with wait multiplier, which can be set with the (init_itable=n) mount option (default is 10). We are doing this so we do not take the whole I/O bandwidth. When the thread is no longer necessary (request list is empty) it frees the appropriate structures and exits (and can be created later later by another filesystem). We do not disturb regular inode allocations in any way, it just do not care whether the inode table is, or is not zeroed. But when zeroing, we have to skip used inodes, obviously. Also we should prevent new inode allocations from the group, while zeroing is on the way. For that we take write alloc_sem lock in ext4_init_inode_table() and read alloc_sem in the ext4_claim_inode, so when we are unlucky and allocator hits the group which is currently being zeroed, it just has to wait. This can be suppresed using the mount option no_init_itable. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-28 01:30:05 +00:00
ret = 1;
if (!ret) {
start_time = ktime_get_real_ns();
ext4: add support for lazy inode table initialization When the lazy_itable_init extended option is passed to mke2fs, it considerably speeds up filesystem creation because inode tables are not zeroed out. The fact that parts of the inode table are uninitialized is not a problem so long as the block group descriptors, which contain information regarding how much of the inode table has been initialized, has not been corrupted However, if the block group checksums are not valid, e2fsck must scan the entire inode table, and the the old, uninitialized data could potentially cause e2fsck to report false problems. Hence, it is important for the inode tables to be initialized as soon as possble. This commit adds this feature so that mke2fs can safely use the lazy inode table initialization feature to speed up formatting file systems. This is done via a new new kernel thread called ext4lazyinit, which is created on demand and destroyed, when it is no longer needed. There is only one thread for all ext4 filesystems in the system. When the first filesystem with inititable mount option is mounted, ext4lazyinit thread is created, then the filesystem can register its request in the request list. This thread then walks through the list of requests picking up scheduled requests and invoking ext4_init_inode_table(). Next schedule time for the request is computed by multiplying the time it took to zero out last inode table with wait multiplier, which can be set with the (init_itable=n) mount option (default is 10). We are doing this so we do not take the whole I/O bandwidth. When the thread is no longer necessary (request list is empty) it frees the appropriate structures and exits (and can be created later later by another filesystem). We do not disturb regular inode allocations in any way, it just do not care whether the inode table is, or is not zeroed. But when zeroing, we have to skip used inodes, obviously. Also we should prevent new inode allocations from the group, while zeroing is on the way. For that we take write alloc_sem lock in ext4_init_inode_table() and read alloc_sem in the ext4_claim_inode, so when we are unlucky and allocator hits the group which is currently being zeroed, it just has to wait. This can be suppresed using the mount option no_init_itable. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-28 01:30:05 +00:00
ret = ext4_init_inode_table(sb, group,
elr->lr_timeout ? 0 : 1);
trace_ext4_lazy_itable_init(sb, group);
ext4: add support for lazy inode table initialization When the lazy_itable_init extended option is passed to mke2fs, it considerably speeds up filesystem creation because inode tables are not zeroed out. The fact that parts of the inode table are uninitialized is not a problem so long as the block group descriptors, which contain information regarding how much of the inode table has been initialized, has not been corrupted However, if the block group checksums are not valid, e2fsck must scan the entire inode table, and the the old, uninitialized data could potentially cause e2fsck to report false problems. Hence, it is important for the inode tables to be initialized as soon as possble. This commit adds this feature so that mke2fs can safely use the lazy inode table initialization feature to speed up formatting file systems. This is done via a new new kernel thread called ext4lazyinit, which is created on demand and destroyed, when it is no longer needed. There is only one thread for all ext4 filesystems in the system. When the first filesystem with inititable mount option is mounted, ext4lazyinit thread is created, then the filesystem can register its request in the request list. This thread then walks through the list of requests picking up scheduled requests and invoking ext4_init_inode_table(). Next schedule time for the request is computed by multiplying the time it took to zero out last inode table with wait multiplier, which can be set with the (init_itable=n) mount option (default is 10). We are doing this so we do not take the whole I/O bandwidth. When the thread is no longer necessary (request list is empty) it frees the appropriate structures and exits (and can be created later later by another filesystem). We do not disturb regular inode allocations in any way, it just do not care whether the inode table is, or is not zeroed. But when zeroing, we have to skip used inodes, obviously. Also we should prevent new inode allocations from the group, while zeroing is on the way. For that we take write alloc_sem lock in ext4_init_inode_table() and read alloc_sem in the ext4_claim_inode, so when we are unlucky and allocator hits the group which is currently being zeroed, it just has to wait. This can be suppresed using the mount option no_init_itable. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-28 01:30:05 +00:00
if (elr->lr_timeout == 0) {
elr->lr_timeout = nsecs_to_jiffies((ktime_get_real_ns() - start_time) *
EXT4_SB(elr->lr_super)->s_li_wait_mult);
ext4: add support for lazy inode table initialization When the lazy_itable_init extended option is passed to mke2fs, it considerably speeds up filesystem creation because inode tables are not zeroed out. The fact that parts of the inode table are uninitialized is not a problem so long as the block group descriptors, which contain information regarding how much of the inode table has been initialized, has not been corrupted However, if the block group checksums are not valid, e2fsck must scan the entire inode table, and the the old, uninitialized data could potentially cause e2fsck to report false problems. Hence, it is important for the inode tables to be initialized as soon as possble. This commit adds this feature so that mke2fs can safely use the lazy inode table initialization feature to speed up formatting file systems. This is done via a new new kernel thread called ext4lazyinit, which is created on demand and destroyed, when it is no longer needed. There is only one thread for all ext4 filesystems in the system. When the first filesystem with inititable mount option is mounted, ext4lazyinit thread is created, then the filesystem can register its request in the request list. This thread then walks through the list of requests picking up scheduled requests and invoking ext4_init_inode_table(). Next schedule time for the request is computed by multiplying the time it took to zero out last inode table with wait multiplier, which can be set with the (init_itable=n) mount option (default is 10). We are doing this so we do not take the whole I/O bandwidth. When the thread is no longer necessary (request list is empty) it frees the appropriate structures and exits (and can be created later later by another filesystem). We do not disturb regular inode allocations in any way, it just do not care whether the inode table is, or is not zeroed. But when zeroing, we have to skip used inodes, obviously. Also we should prevent new inode allocations from the group, while zeroing is on the way. For that we take write alloc_sem lock in ext4_init_inode_table() and read alloc_sem in the ext4_claim_inode, so when we are unlucky and allocator hits the group which is currently being zeroed, it just has to wait. This can be suppresed using the mount option no_init_itable. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-28 01:30:05 +00:00
}
elr->lr_next_sched = jiffies + elr->lr_timeout;
elr->lr_next_group = group + 1;
}
return ret;
}
/*
* Remove lr_request from the list_request and free the
* request structure. Should be called with li_list_mtx held
ext4: add support for lazy inode table initialization When the lazy_itable_init extended option is passed to mke2fs, it considerably speeds up filesystem creation because inode tables are not zeroed out. The fact that parts of the inode table are uninitialized is not a problem so long as the block group descriptors, which contain information regarding how much of the inode table has been initialized, has not been corrupted However, if the block group checksums are not valid, e2fsck must scan the entire inode table, and the the old, uninitialized data could potentially cause e2fsck to report false problems. Hence, it is important for the inode tables to be initialized as soon as possble. This commit adds this feature so that mke2fs can safely use the lazy inode table initialization feature to speed up formatting file systems. This is done via a new new kernel thread called ext4lazyinit, which is created on demand and destroyed, when it is no longer needed. There is only one thread for all ext4 filesystems in the system. When the first filesystem with inititable mount option is mounted, ext4lazyinit thread is created, then the filesystem can register its request in the request list. This thread then walks through the list of requests picking up scheduled requests and invoking ext4_init_inode_table(). Next schedule time for the request is computed by multiplying the time it took to zero out last inode table with wait multiplier, which can be set with the (init_itable=n) mount option (default is 10). We are doing this so we do not take the whole I/O bandwidth. When the thread is no longer necessary (request list is empty) it frees the appropriate structures and exits (and can be created later later by another filesystem). We do not disturb regular inode allocations in any way, it just do not care whether the inode table is, or is not zeroed. But when zeroing, we have to skip used inodes, obviously. Also we should prevent new inode allocations from the group, while zeroing is on the way. For that we take write alloc_sem lock in ext4_init_inode_table() and read alloc_sem in the ext4_claim_inode, so when we are unlucky and allocator hits the group which is currently being zeroed, it just has to wait. This can be suppresed using the mount option no_init_itable. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-28 01:30:05 +00:00
*/
static void ext4_remove_li_request(struct ext4_li_request *elr)
{
if (!elr)
return;
list_del(&elr->lr_request);
EXT4_SB(elr->lr_super)->s_li_request = NULL;
ext4: add support for lazy inode table initialization When the lazy_itable_init extended option is passed to mke2fs, it considerably speeds up filesystem creation because inode tables are not zeroed out. The fact that parts of the inode table are uninitialized is not a problem so long as the block group descriptors, which contain information regarding how much of the inode table has been initialized, has not been corrupted However, if the block group checksums are not valid, e2fsck must scan the entire inode table, and the the old, uninitialized data could potentially cause e2fsck to report false problems. Hence, it is important for the inode tables to be initialized as soon as possble. This commit adds this feature so that mke2fs can safely use the lazy inode table initialization feature to speed up formatting file systems. This is done via a new new kernel thread called ext4lazyinit, which is created on demand and destroyed, when it is no longer needed. There is only one thread for all ext4 filesystems in the system. When the first filesystem with inititable mount option is mounted, ext4lazyinit thread is created, then the filesystem can register its request in the request list. This thread then walks through the list of requests picking up scheduled requests and invoking ext4_init_inode_table(). Next schedule time for the request is computed by multiplying the time it took to zero out last inode table with wait multiplier, which can be set with the (init_itable=n) mount option (default is 10). We are doing this so we do not take the whole I/O bandwidth. When the thread is no longer necessary (request list is empty) it frees the appropriate structures and exits (and can be created later later by another filesystem). We do not disturb regular inode allocations in any way, it just do not care whether the inode table is, or is not zeroed. But when zeroing, we have to skip used inodes, obviously. Also we should prevent new inode allocations from the group, while zeroing is on the way. For that we take write alloc_sem lock in ext4_init_inode_table() and read alloc_sem in the ext4_claim_inode, so when we are unlucky and allocator hits the group which is currently being zeroed, it just has to wait. This can be suppresed using the mount option no_init_itable. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-28 01:30:05 +00:00
kfree(elr);
}
static void ext4_unregister_li_request(struct super_block *sb)
{
mutex_lock(&ext4_li_mtx);
if (!ext4_li_info) {
mutex_unlock(&ext4_li_mtx);
ext4: add support for lazy inode table initialization When the lazy_itable_init extended option is passed to mke2fs, it considerably speeds up filesystem creation because inode tables are not zeroed out. The fact that parts of the inode table are uninitialized is not a problem so long as the block group descriptors, which contain information regarding how much of the inode table has been initialized, has not been corrupted However, if the block group checksums are not valid, e2fsck must scan the entire inode table, and the the old, uninitialized data could potentially cause e2fsck to report false problems. Hence, it is important for the inode tables to be initialized as soon as possble. This commit adds this feature so that mke2fs can safely use the lazy inode table initialization feature to speed up formatting file systems. This is done via a new new kernel thread called ext4lazyinit, which is created on demand and destroyed, when it is no longer needed. There is only one thread for all ext4 filesystems in the system. When the first filesystem with inititable mount option is mounted, ext4lazyinit thread is created, then the filesystem can register its request in the request list. This thread then walks through the list of requests picking up scheduled requests and invoking ext4_init_inode_table(). Next schedule time for the request is computed by multiplying the time it took to zero out last inode table with wait multiplier, which can be set with the (init_itable=n) mount option (default is 10). We are doing this so we do not take the whole I/O bandwidth. When the thread is no longer necessary (request list is empty) it frees the appropriate structures and exits (and can be created later later by another filesystem). We do not disturb regular inode allocations in any way, it just do not care whether the inode table is, or is not zeroed. But when zeroing, we have to skip used inodes, obviously. Also we should prevent new inode allocations from the group, while zeroing is on the way. For that we take write alloc_sem lock in ext4_init_inode_table() and read alloc_sem in the ext4_claim_inode, so when we are unlucky and allocator hits the group which is currently being zeroed, it just has to wait. This can be suppresed using the mount option no_init_itable. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-28 01:30:05 +00:00
return;
}
ext4: add support for lazy inode table initialization When the lazy_itable_init extended option is passed to mke2fs, it considerably speeds up filesystem creation because inode tables are not zeroed out. The fact that parts of the inode table are uninitialized is not a problem so long as the block group descriptors, which contain information regarding how much of the inode table has been initialized, has not been corrupted However, if the block group checksums are not valid, e2fsck must scan the entire inode table, and the the old, uninitialized data could potentially cause e2fsck to report false problems. Hence, it is important for the inode tables to be initialized as soon as possble. This commit adds this feature so that mke2fs can safely use the lazy inode table initialization feature to speed up formatting file systems. This is done via a new new kernel thread called ext4lazyinit, which is created on demand and destroyed, when it is no longer needed. There is only one thread for all ext4 filesystems in the system. When the first filesystem with inititable mount option is mounted, ext4lazyinit thread is created, then the filesystem can register its request in the request list. This thread then walks through the list of requests picking up scheduled requests and invoking ext4_init_inode_table(). Next schedule time for the request is computed by multiplying the time it took to zero out last inode table with wait multiplier, which can be set with the (init_itable=n) mount option (default is 10). We are doing this so we do not take the whole I/O bandwidth. When the thread is no longer necessary (request list is empty) it frees the appropriate structures and exits (and can be created later later by another filesystem). We do not disturb regular inode allocations in any way, it just do not care whether the inode table is, or is not zeroed. But when zeroing, we have to skip used inodes, obviously. Also we should prevent new inode allocations from the group, while zeroing is on the way. For that we take write alloc_sem lock in ext4_init_inode_table() and read alloc_sem in the ext4_claim_inode, so when we are unlucky and allocator hits the group which is currently being zeroed, it just has to wait. This can be suppresed using the mount option no_init_itable. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-28 01:30:05 +00:00
mutex_lock(&ext4_li_info->li_list_mtx);
ext4_remove_li_request(EXT4_SB(sb)->s_li_request);
ext4: add support for lazy inode table initialization When the lazy_itable_init extended option is passed to mke2fs, it considerably speeds up filesystem creation because inode tables are not zeroed out. The fact that parts of the inode table are uninitialized is not a problem so long as the block group descriptors, which contain information regarding how much of the inode table has been initialized, has not been corrupted However, if the block group checksums are not valid, e2fsck must scan the entire inode table, and the the old, uninitialized data could potentially cause e2fsck to report false problems. Hence, it is important for the inode tables to be initialized as soon as possble. This commit adds this feature so that mke2fs can safely use the lazy inode table initialization feature to speed up formatting file systems. This is done via a new new kernel thread called ext4lazyinit, which is created on demand and destroyed, when it is no longer needed. There is only one thread for all ext4 filesystems in the system. When the first filesystem with inititable mount option is mounted, ext4lazyinit thread is created, then the filesystem can register its request in the request list. This thread then walks through the list of requests picking up scheduled requests and invoking ext4_init_inode_table(). Next schedule time for the request is computed by multiplying the time it took to zero out last inode table with wait multiplier, which can be set with the (init_itable=n) mount option (default is 10). We are doing this so we do not take the whole I/O bandwidth. When the thread is no longer necessary (request list is empty) it frees the appropriate structures and exits (and can be created later later by another filesystem). We do not disturb regular inode allocations in any way, it just do not care whether the inode table is, or is not zeroed. But when zeroing, we have to skip used inodes, obviously. Also we should prevent new inode allocations from the group, while zeroing is on the way. For that we take write alloc_sem lock in ext4_init_inode_table() and read alloc_sem in the ext4_claim_inode, so when we are unlucky and allocator hits the group which is currently being zeroed, it just has to wait. This can be suppresed using the mount option no_init_itable. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-28 01:30:05 +00:00
mutex_unlock(&ext4_li_info->li_list_mtx);
mutex_unlock(&ext4_li_mtx);
ext4: add support for lazy inode table initialization When the lazy_itable_init extended option is passed to mke2fs, it considerably speeds up filesystem creation because inode tables are not zeroed out. The fact that parts of the inode table are uninitialized is not a problem so long as the block group descriptors, which contain information regarding how much of the inode table has been initialized, has not been corrupted However, if the block group checksums are not valid, e2fsck must scan the entire inode table, and the the old, uninitialized data could potentially cause e2fsck to report false problems. Hence, it is important for the inode tables to be initialized as soon as possble. This commit adds this feature so that mke2fs can safely use the lazy inode table initialization feature to speed up formatting file systems. This is done via a new new kernel thread called ext4lazyinit, which is created on demand and destroyed, when it is no longer needed. There is only one thread for all ext4 filesystems in the system. When the first filesystem with inititable mount option is mounted, ext4lazyinit thread is created, then the filesystem can register its request in the request list. This thread then walks through the list of requests picking up scheduled requests and invoking ext4_init_inode_table(). Next schedule time for the request is computed by multiplying the time it took to zero out last inode table with wait multiplier, which can be set with the (init_itable=n) mount option (default is 10). We are doing this so we do not take the whole I/O bandwidth. When the thread is no longer necessary (request list is empty) it frees the appropriate structures and exits (and can be created later later by another filesystem). We do not disturb regular inode allocations in any way, it just do not care whether the inode table is, or is not zeroed. But when zeroing, we have to skip used inodes, obviously. Also we should prevent new inode allocations from the group, while zeroing is on the way. For that we take write alloc_sem lock in ext4_init_inode_table() and read alloc_sem in the ext4_claim_inode, so when we are unlucky and allocator hits the group which is currently being zeroed, it just has to wait. This can be suppresed using the mount option no_init_itable. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-28 01:30:05 +00:00
}
static struct task_struct *ext4_lazyinit_task;
ext4: add support for lazy inode table initialization When the lazy_itable_init extended option is passed to mke2fs, it considerably speeds up filesystem creation because inode tables are not zeroed out. The fact that parts of the inode table are uninitialized is not a problem so long as the block group descriptors, which contain information regarding how much of the inode table has been initialized, has not been corrupted However, if the block group checksums are not valid, e2fsck must scan the entire inode table, and the the old, uninitialized data could potentially cause e2fsck to report false problems. Hence, it is important for the inode tables to be initialized as soon as possble. This commit adds this feature so that mke2fs can safely use the lazy inode table initialization feature to speed up formatting file systems. This is done via a new new kernel thread called ext4lazyinit, which is created on demand and destroyed, when it is no longer needed. There is only one thread for all ext4 filesystems in the system. When the first filesystem with inititable mount option is mounted, ext4lazyinit thread is created, then the filesystem can register its request in the request list. This thread then walks through the list of requests picking up scheduled requests and invoking ext4_init_inode_table(). Next schedule time for the request is computed by multiplying the time it took to zero out last inode table with wait multiplier, which can be set with the (init_itable=n) mount option (default is 10). We are doing this so we do not take the whole I/O bandwidth. When the thread is no longer necessary (request list is empty) it frees the appropriate structures and exits (and can be created later later by another filesystem). We do not disturb regular inode allocations in any way, it just do not care whether the inode table is, or is not zeroed. But when zeroing, we have to skip used inodes, obviously. Also we should prevent new inode allocations from the group, while zeroing is on the way. For that we take write alloc_sem lock in ext4_init_inode_table() and read alloc_sem in the ext4_claim_inode, so when we are unlucky and allocator hits the group which is currently being zeroed, it just has to wait. This can be suppresed using the mount option no_init_itable. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-28 01:30:05 +00:00
/*
* This is the function where ext4lazyinit thread lives. It walks
* through the request list searching for next scheduled filesystem.
* When such a fs is found, run the lazy initialization request
* (ext4_rn_li_request) and keep track of the time spend in this
* function. Based on that time we compute next schedule time of
* the request. When walking through the list is complete, compute
* next waking time and put itself into sleep.
*/
static int ext4_lazyinit_thread(void *arg)
{
struct ext4_lazy_init *eli = arg;
ext4: add support for lazy inode table initialization When the lazy_itable_init extended option is passed to mke2fs, it considerably speeds up filesystem creation because inode tables are not zeroed out. The fact that parts of the inode table are uninitialized is not a problem so long as the block group descriptors, which contain information regarding how much of the inode table has been initialized, has not been corrupted However, if the block group checksums are not valid, e2fsck must scan the entire inode table, and the the old, uninitialized data could potentially cause e2fsck to report false problems. Hence, it is important for the inode tables to be initialized as soon as possble. This commit adds this feature so that mke2fs can safely use the lazy inode table initialization feature to speed up formatting file systems. This is done via a new new kernel thread called ext4lazyinit, which is created on demand and destroyed, when it is no longer needed. There is only one thread for all ext4 filesystems in the system. When the first filesystem with inititable mount option is mounted, ext4lazyinit thread is created, then the filesystem can register its request in the request list. This thread then walks through the list of requests picking up scheduled requests and invoking ext4_init_inode_table(). Next schedule time for the request is computed by multiplying the time it took to zero out last inode table with wait multiplier, which can be set with the (init_itable=n) mount option (default is 10). We are doing this so we do not take the whole I/O bandwidth. When the thread is no longer necessary (request list is empty) it frees the appropriate structures and exits (and can be created later later by another filesystem). We do not disturb regular inode allocations in any way, it just do not care whether the inode table is, or is not zeroed. But when zeroing, we have to skip used inodes, obviously. Also we should prevent new inode allocations from the group, while zeroing is on the way. For that we take write alloc_sem lock in ext4_init_inode_table() and read alloc_sem in the ext4_claim_inode, so when we are unlucky and allocator hits the group which is currently being zeroed, it just has to wait. This can be suppresed using the mount option no_init_itable. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-28 01:30:05 +00:00
struct list_head *pos, *n;
struct ext4_li_request *elr;
unsigned long next_wakeup, cur;
ext4: add support for lazy inode table initialization When the lazy_itable_init extended option is passed to mke2fs, it considerably speeds up filesystem creation because inode tables are not zeroed out. The fact that parts of the inode table are uninitialized is not a problem so long as the block group descriptors, which contain information regarding how much of the inode table has been initialized, has not been corrupted However, if the block group checksums are not valid, e2fsck must scan the entire inode table, and the the old, uninitialized data could potentially cause e2fsck to report false problems. Hence, it is important for the inode tables to be initialized as soon as possble. This commit adds this feature so that mke2fs can safely use the lazy inode table initialization feature to speed up formatting file systems. This is done via a new new kernel thread called ext4lazyinit, which is created on demand and destroyed, when it is no longer needed. There is only one thread for all ext4 filesystems in the system. When the first filesystem with inititable mount option is mounted, ext4lazyinit thread is created, then the filesystem can register its request in the request list. This thread then walks through the list of requests picking up scheduled requests and invoking ext4_init_inode_table(). Next schedule time for the request is computed by multiplying the time it took to zero out last inode table with wait multiplier, which can be set with the (init_itable=n) mount option (default is 10). We are doing this so we do not take the whole I/O bandwidth. When the thread is no longer necessary (request list is empty) it frees the appropriate structures and exits (and can be created later later by another filesystem). We do not disturb regular inode allocations in any way, it just do not care whether the inode table is, or is not zeroed. But when zeroing, we have to skip used inodes, obviously. Also we should prevent new inode allocations from the group, while zeroing is on the way. For that we take write alloc_sem lock in ext4_init_inode_table() and read alloc_sem in the ext4_claim_inode, so when we are unlucky and allocator hits the group which is currently being zeroed, it just has to wait. This can be suppresed using the mount option no_init_itable. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-28 01:30:05 +00:00
BUG_ON(NULL == eli);
set_freezable();
ext4: add support for lazy inode table initialization When the lazy_itable_init extended option is passed to mke2fs, it considerably speeds up filesystem creation because inode tables are not zeroed out. The fact that parts of the inode table are uninitialized is not a problem so long as the block group descriptors, which contain information regarding how much of the inode table has been initialized, has not been corrupted However, if the block group checksums are not valid, e2fsck must scan the entire inode table, and the the old, uninitialized data could potentially cause e2fsck to report false problems. Hence, it is important for the inode tables to be initialized as soon as possble. This commit adds this feature so that mke2fs can safely use the lazy inode table initialization feature to speed up formatting file systems. This is done via a new new kernel thread called ext4lazyinit, which is created on demand and destroyed, when it is no longer needed. There is only one thread for all ext4 filesystems in the system. When the first filesystem with inititable mount option is mounted, ext4lazyinit thread is created, then the filesystem can register its request in the request list. This thread then walks through the list of requests picking up scheduled requests and invoking ext4_init_inode_table(). Next schedule time for the request is computed by multiplying the time it took to zero out last inode table with wait multiplier, which can be set with the (init_itable=n) mount option (default is 10). We are doing this so we do not take the whole I/O bandwidth. When the thread is no longer necessary (request list is empty) it frees the appropriate structures and exits (and can be created later later by another filesystem). We do not disturb regular inode allocations in any way, it just do not care whether the inode table is, or is not zeroed. But when zeroing, we have to skip used inodes, obviously. Also we should prevent new inode allocations from the group, while zeroing is on the way. For that we take write alloc_sem lock in ext4_init_inode_table() and read alloc_sem in the ext4_claim_inode, so when we are unlucky and allocator hits the group which is currently being zeroed, it just has to wait. This can be suppresed using the mount option no_init_itable. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-28 01:30:05 +00:00
cont_thread:
while (true) {
next_wakeup = MAX_JIFFY_OFFSET;
mutex_lock(&eli->li_list_mtx);
if (list_empty(&eli->li_request_list)) {
mutex_unlock(&eli->li_list_mtx);
goto exit_thread;
}
list_for_each_safe(pos, n, &eli->li_request_list) {
int err = 0;
int progress = 0;
ext4: add support for lazy inode table initialization When the lazy_itable_init extended option is passed to mke2fs, it considerably speeds up filesystem creation because inode tables are not zeroed out. The fact that parts of the inode table are uninitialized is not a problem so long as the block group descriptors, which contain information regarding how much of the inode table has been initialized, has not been corrupted However, if the block group checksums are not valid, e2fsck must scan the entire inode table, and the the old, uninitialized data could potentially cause e2fsck to report false problems. Hence, it is important for the inode tables to be initialized as soon as possble. This commit adds this feature so that mke2fs can safely use the lazy inode table initialization feature to speed up formatting file systems. This is done via a new new kernel thread called ext4lazyinit, which is created on demand and destroyed, when it is no longer needed. There is only one thread for all ext4 filesystems in the system. When the first filesystem with inititable mount option is mounted, ext4lazyinit thread is created, then the filesystem can register its request in the request list. This thread then walks through the list of requests picking up scheduled requests and invoking ext4_init_inode_table(). Next schedule time for the request is computed by multiplying the time it took to zero out last inode table with wait multiplier, which can be set with the (init_itable=n) mount option (default is 10). We are doing this so we do not take the whole I/O bandwidth. When the thread is no longer necessary (request list is empty) it frees the appropriate structures and exits (and can be created later later by another filesystem). We do not disturb regular inode allocations in any way, it just do not care whether the inode table is, or is not zeroed. But when zeroing, we have to skip used inodes, obviously. Also we should prevent new inode allocations from the group, while zeroing is on the way. For that we take write alloc_sem lock in ext4_init_inode_table() and read alloc_sem in the ext4_claim_inode, so when we are unlucky and allocator hits the group which is currently being zeroed, it just has to wait. This can be suppresed using the mount option no_init_itable. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-28 01:30:05 +00:00
elr = list_entry(pos, struct ext4_li_request,
lr_request);
if (time_before(jiffies, elr->lr_next_sched)) {
if (time_before(elr->lr_next_sched, next_wakeup))
next_wakeup = elr->lr_next_sched;
continue;
}
if (down_read_trylock(&elr->lr_super->s_umount)) {
if (sb_start_write_trylock(elr->lr_super)) {
progress = 1;
/*
* We hold sb->s_umount, sb can not
* be removed from the list, it is
* now safe to drop li_list_mtx
*/
mutex_unlock(&eli->li_list_mtx);
err = ext4_run_li_request(elr);
sb_end_write(elr->lr_super);
mutex_lock(&eli->li_list_mtx);
n = pos->next;
}
up_read((&elr->lr_super->s_umount));
}
/* error, remove the lazy_init job */
if (err) {
ext4_remove_li_request(elr);
continue;
}
if (!progress) {
elr->lr_next_sched = jiffies +
get_random_u32_below(EXT4_DEF_LI_MAX_START_DELAY * HZ);
ext4: add support for lazy inode table initialization When the lazy_itable_init extended option is passed to mke2fs, it considerably speeds up filesystem creation because inode tables are not zeroed out. The fact that parts of the inode table are uninitialized is not a problem so long as the block group descriptors, which contain information regarding how much of the inode table has been initialized, has not been corrupted However, if the block group checksums are not valid, e2fsck must scan the entire inode table, and the the old, uninitialized data could potentially cause e2fsck to report false problems. Hence, it is important for the inode tables to be initialized as soon as possble. This commit adds this feature so that mke2fs can safely use the lazy inode table initialization feature to speed up formatting file systems. This is done via a new new kernel thread called ext4lazyinit, which is created on demand and destroyed, when it is no longer needed. There is only one thread for all ext4 filesystems in the system. When the first filesystem with inititable mount option is mounted, ext4lazyinit thread is created, then the filesystem can register its request in the request list. This thread then walks through the list of requests picking up scheduled requests and invoking ext4_init_inode_table(). Next schedule time for the request is computed by multiplying the time it took to zero out last inode table with wait multiplier, which can be set with the (init_itable=n) mount option (default is 10). We are doing this so we do not take the whole I/O bandwidth. When the thread is no longer necessary (request list is empty) it frees the appropriate structures and exits (and can be created later later by another filesystem). We do not disturb regular inode allocations in any way, it just do not care whether the inode table is, or is not zeroed. But when zeroing, we have to skip used inodes, obviously. Also we should prevent new inode allocations from the group, while zeroing is on the way. For that we take write alloc_sem lock in ext4_init_inode_table() and read alloc_sem in the ext4_claim_inode, so when we are unlucky and allocator hits the group which is currently being zeroed, it just has to wait. This can be suppresed using the mount option no_init_itable. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-28 01:30:05 +00:00
}
if (time_before(elr->lr_next_sched, next_wakeup))
next_wakeup = elr->lr_next_sched;
}
mutex_unlock(&eli->li_list_mtx);
try_to_freeze();
ext4: add support for lazy inode table initialization When the lazy_itable_init extended option is passed to mke2fs, it considerably speeds up filesystem creation because inode tables are not zeroed out. The fact that parts of the inode table are uninitialized is not a problem so long as the block group descriptors, which contain information regarding how much of the inode table has been initialized, has not been corrupted However, if the block group checksums are not valid, e2fsck must scan the entire inode table, and the the old, uninitialized data could potentially cause e2fsck to report false problems. Hence, it is important for the inode tables to be initialized as soon as possble. This commit adds this feature so that mke2fs can safely use the lazy inode table initialization feature to speed up formatting file systems. This is done via a new new kernel thread called ext4lazyinit, which is created on demand and destroyed, when it is no longer needed. There is only one thread for all ext4 filesystems in the system. When the first filesystem with inititable mount option is mounted, ext4lazyinit thread is created, then the filesystem can register its request in the request list. This thread then walks through the list of requests picking up scheduled requests and invoking ext4_init_inode_table(). Next schedule time for the request is computed by multiplying the time it took to zero out last inode table with wait multiplier, which can be set with the (init_itable=n) mount option (default is 10). We are doing this so we do not take the whole I/O bandwidth. When the thread is no longer necessary (request list is empty) it frees the appropriate structures and exits (and can be created later later by another filesystem). We do not disturb regular inode allocations in any way, it just do not care whether the inode table is, or is not zeroed. But when zeroing, we have to skip used inodes, obviously. Also we should prevent new inode allocations from the group, while zeroing is on the way. For that we take write alloc_sem lock in ext4_init_inode_table() and read alloc_sem in the ext4_claim_inode, so when we are unlucky and allocator hits the group which is currently being zeroed, it just has to wait. This can be suppresed using the mount option no_init_itable. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-28 01:30:05 +00:00
cur = jiffies;
if ((time_after_eq(cur, next_wakeup)) ||
(MAX_JIFFY_OFFSET == next_wakeup)) {
ext4: add support for lazy inode table initialization When the lazy_itable_init extended option is passed to mke2fs, it considerably speeds up filesystem creation because inode tables are not zeroed out. The fact that parts of the inode table are uninitialized is not a problem so long as the block group descriptors, which contain information regarding how much of the inode table has been initialized, has not been corrupted However, if the block group checksums are not valid, e2fsck must scan the entire inode table, and the the old, uninitialized data could potentially cause e2fsck to report false problems. Hence, it is important for the inode tables to be initialized as soon as possble. This commit adds this feature so that mke2fs can safely use the lazy inode table initialization feature to speed up formatting file systems. This is done via a new new kernel thread called ext4lazyinit, which is created on demand and destroyed, when it is no longer needed. There is only one thread for all ext4 filesystems in the system. When the first filesystem with inititable mount option is mounted, ext4lazyinit thread is created, then the filesystem can register its request in the request list. This thread then walks through the list of requests picking up scheduled requests and invoking ext4_init_inode_table(). Next schedule time for the request is computed by multiplying the time it took to zero out last inode table with wait multiplier, which can be set with the (init_itable=n) mount option (default is 10). We are doing this so we do not take the whole I/O bandwidth. When the thread is no longer necessary (request list is empty) it frees the appropriate structures and exits (and can be created later later by another filesystem). We do not disturb regular inode allocations in any way, it just do not care whether the inode table is, or is not zeroed. But when zeroing, we have to skip used inodes, obviously. Also we should prevent new inode allocations from the group, while zeroing is on the way. For that we take write alloc_sem lock in ext4_init_inode_table() and read alloc_sem in the ext4_claim_inode, so when we are unlucky and allocator hits the group which is currently being zeroed, it just has to wait. This can be suppresed using the mount option no_init_itable. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-28 01:30:05 +00:00
cond_resched();
continue;
}
schedule_timeout_interruptible(next_wakeup - cur);
if (kthread_should_stop()) {
ext4_clear_request_list();
goto exit_thread;
}
ext4: add support for lazy inode table initialization When the lazy_itable_init extended option is passed to mke2fs, it considerably speeds up filesystem creation because inode tables are not zeroed out. The fact that parts of the inode table are uninitialized is not a problem so long as the block group descriptors, which contain information regarding how much of the inode table has been initialized, has not been corrupted However, if the block group checksums are not valid, e2fsck must scan the entire inode table, and the the old, uninitialized data could potentially cause e2fsck to report false problems. Hence, it is important for the inode tables to be initialized as soon as possble. This commit adds this feature so that mke2fs can safely use the lazy inode table initialization feature to speed up formatting file systems. This is done via a new new kernel thread called ext4lazyinit, which is created on demand and destroyed, when it is no longer needed. There is only one thread for all ext4 filesystems in the system. When the first filesystem with inititable mount option is mounted, ext4lazyinit thread is created, then the filesystem can register its request in the request list. This thread then walks through the list of requests picking up scheduled requests and invoking ext4_init_inode_table(). Next schedule time for the request is computed by multiplying the time it took to zero out last inode table with wait multiplier, which can be set with the (init_itable=n) mount option (default is 10). We are doing this so we do not take the whole I/O bandwidth. When the thread is no longer necessary (request list is empty) it frees the appropriate structures and exits (and can be created later later by another filesystem). We do not disturb regular inode allocations in any way, it just do not care whether the inode table is, or is not zeroed. But when zeroing, we have to skip used inodes, obviously. Also we should prevent new inode allocations from the group, while zeroing is on the way. For that we take write alloc_sem lock in ext4_init_inode_table() and read alloc_sem in the ext4_claim_inode, so when we are unlucky and allocator hits the group which is currently being zeroed, it just has to wait. This can be suppresed using the mount option no_init_itable. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-28 01:30:05 +00:00
}
exit_thread:
/*
* It looks like the request list is empty, but we need
* to check it under the li_list_mtx lock, to prevent any
* additions into it, and of course we should lock ext4_li_mtx
* to atomically free the list and ext4_li_info, because at
* this point another ext4 filesystem could be registering
* new one.
*/
mutex_lock(&ext4_li_mtx);
mutex_lock(&eli->li_list_mtx);
if (!list_empty(&eli->li_request_list)) {
mutex_unlock(&eli->li_list_mtx);
mutex_unlock(&ext4_li_mtx);
goto cont_thread;
}
mutex_unlock(&eli->li_list_mtx);
kfree(ext4_li_info);
ext4_li_info = NULL;
mutex_unlock(&ext4_li_mtx);
return 0;
}
static void ext4_clear_request_list(void)
{
struct list_head *pos, *n;
struct ext4_li_request *elr;
mutex_lock(&ext4_li_info->li_list_mtx);
list_for_each_safe(pos, n, &ext4_li_info->li_request_list) {
elr = list_entry(pos, struct ext4_li_request,
lr_request);
ext4_remove_li_request(elr);
}
mutex_unlock(&ext4_li_info->li_list_mtx);
}
static int ext4_run_lazyinit_thread(void)
{
ext4_lazyinit_task = kthread_run(ext4_lazyinit_thread,
ext4_li_info, "ext4lazyinit");
if (IS_ERR(ext4_lazyinit_task)) {
int err = PTR_ERR(ext4_lazyinit_task);
ext4: add support for lazy inode table initialization When the lazy_itable_init extended option is passed to mke2fs, it considerably speeds up filesystem creation because inode tables are not zeroed out. The fact that parts of the inode table are uninitialized is not a problem so long as the block group descriptors, which contain information regarding how much of the inode table has been initialized, has not been corrupted However, if the block group checksums are not valid, e2fsck must scan the entire inode table, and the the old, uninitialized data could potentially cause e2fsck to report false problems. Hence, it is important for the inode tables to be initialized as soon as possble. This commit adds this feature so that mke2fs can safely use the lazy inode table initialization feature to speed up formatting file systems. This is done via a new new kernel thread called ext4lazyinit, which is created on demand and destroyed, when it is no longer needed. There is only one thread for all ext4 filesystems in the system. When the first filesystem with inititable mount option is mounted, ext4lazyinit thread is created, then the filesystem can register its request in the request list. This thread then walks through the list of requests picking up scheduled requests and invoking ext4_init_inode_table(). Next schedule time for the request is computed by multiplying the time it took to zero out last inode table with wait multiplier, which can be set with the (init_itable=n) mount option (default is 10). We are doing this so we do not take the whole I/O bandwidth. When the thread is no longer necessary (request list is empty) it frees the appropriate structures and exits (and can be created later later by another filesystem). We do not disturb regular inode allocations in any way, it just do not care whether the inode table is, or is not zeroed. But when zeroing, we have to skip used inodes, obviously. Also we should prevent new inode allocations from the group, while zeroing is on the way. For that we take write alloc_sem lock in ext4_init_inode_table() and read alloc_sem in the ext4_claim_inode, so when we are unlucky and allocator hits the group which is currently being zeroed, it just has to wait. This can be suppresed using the mount option no_init_itable. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-28 01:30:05 +00:00
ext4_clear_request_list();
kfree(ext4_li_info);
ext4_li_info = NULL;
printk(KERN_CRIT "EXT4-fs: error %d creating inode table "
ext4: add support for lazy inode table initialization When the lazy_itable_init extended option is passed to mke2fs, it considerably speeds up filesystem creation because inode tables are not zeroed out. The fact that parts of the inode table are uninitialized is not a problem so long as the block group descriptors, which contain information regarding how much of the inode table has been initialized, has not been corrupted However, if the block group checksums are not valid, e2fsck must scan the entire inode table, and the the old, uninitialized data could potentially cause e2fsck to report false problems. Hence, it is important for the inode tables to be initialized as soon as possble. This commit adds this feature so that mke2fs can safely use the lazy inode table initialization feature to speed up formatting file systems. This is done via a new new kernel thread called ext4lazyinit, which is created on demand and destroyed, when it is no longer needed. There is only one thread for all ext4 filesystems in the system. When the first filesystem with inititable mount option is mounted, ext4lazyinit thread is created, then the filesystem can register its request in the request list. This thread then walks through the list of requests picking up scheduled requests and invoking ext4_init_inode_table(). Next schedule time for the request is computed by multiplying the time it took to zero out last inode table with wait multiplier, which can be set with the (init_itable=n) mount option (default is 10). We are doing this so we do not take the whole I/O bandwidth. When the thread is no longer necessary (request list is empty) it frees the appropriate structures and exits (and can be created later later by another filesystem). We do not disturb regular inode allocations in any way, it just do not care whether the inode table is, or is not zeroed. But when zeroing, we have to skip used inodes, obviously. Also we should prevent new inode allocations from the group, while zeroing is on the way. For that we take write alloc_sem lock in ext4_init_inode_table() and read alloc_sem in the ext4_claim_inode, so when we are unlucky and allocator hits the group which is currently being zeroed, it just has to wait. This can be suppresed using the mount option no_init_itable. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-28 01:30:05 +00:00
"initialization thread\n",
err);
return err;
}
ext4_li_info->li_state |= EXT4_LAZYINIT_RUNNING;
return 0;
}
/*
* Check whether it make sense to run itable init. thread or not.
* If there is at least one uninitialized inode table, return
* corresponding group number, else the loop goes through all
* groups and return total number of groups.
*/
static ext4_group_t ext4_has_uninit_itable(struct super_block *sb)
{
ext4_group_t group, ngroups = EXT4_SB(sb)->s_groups_count;
struct ext4_group_desc *gdp = NULL;
if (!ext4_has_group_desc_csum(sb))
return ngroups;
ext4: add support for lazy inode table initialization When the lazy_itable_init extended option is passed to mke2fs, it considerably speeds up filesystem creation because inode tables are not zeroed out. The fact that parts of the inode table are uninitialized is not a problem so long as the block group descriptors, which contain information regarding how much of the inode table has been initialized, has not been corrupted However, if the block group checksums are not valid, e2fsck must scan the entire inode table, and the the old, uninitialized data could potentially cause e2fsck to report false problems. Hence, it is important for the inode tables to be initialized as soon as possble. This commit adds this feature so that mke2fs can safely use the lazy inode table initialization feature to speed up formatting file systems. This is done via a new new kernel thread called ext4lazyinit, which is created on demand and destroyed, when it is no longer needed. There is only one thread for all ext4 filesystems in the system. When the first filesystem with inititable mount option is mounted, ext4lazyinit thread is created, then the filesystem can register its request in the request list. This thread then walks through the list of requests picking up scheduled requests and invoking ext4_init_inode_table(). Next schedule time for the request is computed by multiplying the time it took to zero out last inode table with wait multiplier, which can be set with the (init_itable=n) mount option (default is 10). We are doing this so we do not take the whole I/O bandwidth. When the thread is no longer necessary (request list is empty) it frees the appropriate structures and exits (and can be created later later by another filesystem). We do not disturb regular inode allocations in any way, it just do not care whether the inode table is, or is not zeroed. But when zeroing, we have to skip used inodes, obviously. Also we should prevent new inode allocations from the group, while zeroing is on the way. For that we take write alloc_sem lock in ext4_init_inode_table() and read alloc_sem in the ext4_claim_inode, so when we are unlucky and allocator hits the group which is currently being zeroed, it just has to wait. This can be suppresed using the mount option no_init_itable. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-28 01:30:05 +00:00
for (group = 0; group < ngroups; group++) {
gdp = ext4_get_group_desc(sb, group, NULL);
if (!gdp)
continue;
if (!(gdp->bg_flags & cpu_to_le16(EXT4_BG_INODE_ZEROED)))
ext4: add support for lazy inode table initialization When the lazy_itable_init extended option is passed to mke2fs, it considerably speeds up filesystem creation because inode tables are not zeroed out. The fact that parts of the inode table are uninitialized is not a problem so long as the block group descriptors, which contain information regarding how much of the inode table has been initialized, has not been corrupted However, if the block group checksums are not valid, e2fsck must scan the entire inode table, and the the old, uninitialized data could potentially cause e2fsck to report false problems. Hence, it is important for the inode tables to be initialized as soon as possble. This commit adds this feature so that mke2fs can safely use the lazy inode table initialization feature to speed up formatting file systems. This is done via a new new kernel thread called ext4lazyinit, which is created on demand and destroyed, when it is no longer needed. There is only one thread for all ext4 filesystems in the system. When the first filesystem with inititable mount option is mounted, ext4lazyinit thread is created, then the filesystem can register its request in the request list. This thread then walks through the list of requests picking up scheduled requests and invoking ext4_init_inode_table(). Next schedule time for the request is computed by multiplying the time it took to zero out last inode table with wait multiplier, which can be set with the (init_itable=n) mount option (default is 10). We are doing this so we do not take the whole I/O bandwidth. When the thread is no longer necessary (request list is empty) it frees the appropriate structures and exits (and can be created later later by another filesystem). We do not disturb regular inode allocations in any way, it just do not care whether the inode table is, or is not zeroed. But when zeroing, we have to skip used inodes, obviously. Also we should prevent new inode allocations from the group, while zeroing is on the way. For that we take write alloc_sem lock in ext4_init_inode_table() and read alloc_sem in the ext4_claim_inode, so when we are unlucky and allocator hits the group which is currently being zeroed, it just has to wait. This can be suppresed using the mount option no_init_itable. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-28 01:30:05 +00:00
break;
}
return group;
}
static int ext4_li_info_new(void)
{
struct ext4_lazy_init *eli = NULL;
eli = kzalloc(sizeof(*eli), GFP_KERNEL);
if (!eli)
return -ENOMEM;
INIT_LIST_HEAD(&eli->li_request_list);
mutex_init(&eli->li_list_mtx);
eli->li_state |= EXT4_LAZYINIT_QUIT;
ext4_li_info = eli;
return 0;
}
static struct ext4_li_request *ext4_li_request_new(struct super_block *sb,
ext4_group_t start)
{
struct ext4_li_request *elr;
elr = kzalloc(sizeof(*elr), GFP_KERNEL);
if (!elr)
return NULL;
elr->lr_super = sb;
elr->lr_first_not_zeroed = start;
if (test_opt(sb, NO_PREFETCH_BLOCK_BITMAPS)) {
elr->lr_mode = EXT4_LI_MODE_ITABLE;
elr->lr_next_group = start;
} else {
elr->lr_mode = EXT4_LI_MODE_PREFETCH_BBITMAP;
}
ext4: add support for lazy inode table initialization When the lazy_itable_init extended option is passed to mke2fs, it considerably speeds up filesystem creation because inode tables are not zeroed out. The fact that parts of the inode table are uninitialized is not a problem so long as the block group descriptors, which contain information regarding how much of the inode table has been initialized, has not been corrupted However, if the block group checksums are not valid, e2fsck must scan the entire inode table, and the the old, uninitialized data could potentially cause e2fsck to report false problems. Hence, it is important for the inode tables to be initialized as soon as possble. This commit adds this feature so that mke2fs can safely use the lazy inode table initialization feature to speed up formatting file systems. This is done via a new new kernel thread called ext4lazyinit, which is created on demand and destroyed, when it is no longer needed. There is only one thread for all ext4 filesystems in the system. When the first filesystem with inititable mount option is mounted, ext4lazyinit thread is created, then the filesystem can register its request in the request list. This thread then walks through the list of requests picking up scheduled requests and invoking ext4_init_inode_table(). Next schedule time for the request is computed by multiplying the time it took to zero out last inode table with wait multiplier, which can be set with the (init_itable=n) mount option (default is 10). We are doing this so we do not take the whole I/O bandwidth. When the thread is no longer necessary (request list is empty) it frees the appropriate structures and exits (and can be created later later by another filesystem). We do not disturb regular inode allocations in any way, it just do not care whether the inode table is, or is not zeroed. But when zeroing, we have to skip used inodes, obviously. Also we should prevent new inode allocations from the group, while zeroing is on the way. For that we take write alloc_sem lock in ext4_init_inode_table() and read alloc_sem in the ext4_claim_inode, so when we are unlucky and allocator hits the group which is currently being zeroed, it just has to wait. This can be suppresed using the mount option no_init_itable. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-28 01:30:05 +00:00
/*
* Randomize first schedule time of the request to
* spread the inode table initialization requests
* better.
*/
elr->lr_next_sched = jiffies + get_random_u32_below(EXT4_DEF_LI_MAX_START_DELAY * HZ);
ext4: add support for lazy inode table initialization When the lazy_itable_init extended option is passed to mke2fs, it considerably speeds up filesystem creation because inode tables are not zeroed out. The fact that parts of the inode table are uninitialized is not a problem so long as the block group descriptors, which contain information regarding how much of the inode table has been initialized, has not been corrupted However, if the block group checksums are not valid, e2fsck must scan the entire inode table, and the the old, uninitialized data could potentially cause e2fsck to report false problems. Hence, it is important for the inode tables to be initialized as soon as possble. This commit adds this feature so that mke2fs can safely use the lazy inode table initialization feature to speed up formatting file systems. This is done via a new new kernel thread called ext4lazyinit, which is created on demand and destroyed, when it is no longer needed. There is only one thread for all ext4 filesystems in the system. When the first filesystem with inititable mount option is mounted, ext4lazyinit thread is created, then the filesystem can register its request in the request list. This thread then walks through the list of requests picking up scheduled requests and invoking ext4_init_inode_table(). Next schedule time for the request is computed by multiplying the time it took to zero out last inode table with wait multiplier, which can be set with the (init_itable=n) mount option (default is 10). We are doing this so we do not take the whole I/O bandwidth. When the thread is no longer necessary (request list is empty) it frees the appropriate structures and exits (and can be created later later by another filesystem). We do not disturb regular inode allocations in any way, it just do not care whether the inode table is, or is not zeroed. But when zeroing, we have to skip used inodes, obviously. Also we should prevent new inode allocations from the group, while zeroing is on the way. For that we take write alloc_sem lock in ext4_init_inode_table() and read alloc_sem in the ext4_claim_inode, so when we are unlucky and allocator hits the group which is currently being zeroed, it just has to wait. This can be suppresed using the mount option no_init_itable. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-28 01:30:05 +00:00
return elr;
}
int ext4_register_li_request(struct super_block *sb,
ext4_group_t first_not_zeroed)
ext4: add support for lazy inode table initialization When the lazy_itable_init extended option is passed to mke2fs, it considerably speeds up filesystem creation because inode tables are not zeroed out. The fact that parts of the inode table are uninitialized is not a problem so long as the block group descriptors, which contain information regarding how much of the inode table has been initialized, has not been corrupted However, if the block group checksums are not valid, e2fsck must scan the entire inode table, and the the old, uninitialized data could potentially cause e2fsck to report false problems. Hence, it is important for the inode tables to be initialized as soon as possble. This commit adds this feature so that mke2fs can safely use the lazy inode table initialization feature to speed up formatting file systems. This is done via a new new kernel thread called ext4lazyinit, which is created on demand and destroyed, when it is no longer needed. There is only one thread for all ext4 filesystems in the system. When the first filesystem with inititable mount option is mounted, ext4lazyinit thread is created, then the filesystem can register its request in the request list. This thread then walks through the list of requests picking up scheduled requests and invoking ext4_init_inode_table(). Next schedule time for the request is computed by multiplying the time it took to zero out last inode table with wait multiplier, which can be set with the (init_itable=n) mount option (default is 10). We are doing this so we do not take the whole I/O bandwidth. When the thread is no longer necessary (request list is empty) it frees the appropriate structures and exits (and can be created later later by another filesystem). We do not disturb regular inode allocations in any way, it just do not care whether the inode table is, or is not zeroed. But when zeroing, we have to skip used inodes, obviously. Also we should prevent new inode allocations from the group, while zeroing is on the way. For that we take write alloc_sem lock in ext4_init_inode_table() and read alloc_sem in the ext4_claim_inode, so when we are unlucky and allocator hits the group which is currently being zeroed, it just has to wait. This can be suppresed using the mount option no_init_itable. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-28 01:30:05 +00:00
{
struct ext4_sb_info *sbi = EXT4_SB(sb);
struct ext4_li_request *elr = NULL;
ext4_group_t ngroups = sbi->s_groups_count;
int ret = 0;
ext4: add support for lazy inode table initialization When the lazy_itable_init extended option is passed to mke2fs, it considerably speeds up filesystem creation because inode tables are not zeroed out. The fact that parts of the inode table are uninitialized is not a problem so long as the block group descriptors, which contain information regarding how much of the inode table has been initialized, has not been corrupted However, if the block group checksums are not valid, e2fsck must scan the entire inode table, and the the old, uninitialized data could potentially cause e2fsck to report false problems. Hence, it is important for the inode tables to be initialized as soon as possble. This commit adds this feature so that mke2fs can safely use the lazy inode table initialization feature to speed up formatting file systems. This is done via a new new kernel thread called ext4lazyinit, which is created on demand and destroyed, when it is no longer needed. There is only one thread for all ext4 filesystems in the system. When the first filesystem with inititable mount option is mounted, ext4lazyinit thread is created, then the filesystem can register its request in the request list. This thread then walks through the list of requests picking up scheduled requests and invoking ext4_init_inode_table(). Next schedule time for the request is computed by multiplying the time it took to zero out last inode table with wait multiplier, which can be set with the (init_itable=n) mount option (default is 10). We are doing this so we do not take the whole I/O bandwidth. When the thread is no longer necessary (request list is empty) it frees the appropriate structures and exits (and can be created later later by another filesystem). We do not disturb regular inode allocations in any way, it just do not care whether the inode table is, or is not zeroed. But when zeroing, we have to skip used inodes, obviously. Also we should prevent new inode allocations from the group, while zeroing is on the way. For that we take write alloc_sem lock in ext4_init_inode_table() and read alloc_sem in the ext4_claim_inode, so when we are unlucky and allocator hits the group which is currently being zeroed, it just has to wait. This can be suppresed using the mount option no_init_itable. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-28 01:30:05 +00:00
mutex_lock(&ext4_li_mtx);
if (sbi->s_li_request != NULL) {
/*
* Reset timeout so it can be computed again, because
* s_li_wait_mult might have changed.
*/
sbi->s_li_request->lr_timeout = 0;
goto out;
}
ext4: add support for lazy inode table initialization When the lazy_itable_init extended option is passed to mke2fs, it considerably speeds up filesystem creation because inode tables are not zeroed out. The fact that parts of the inode table are uninitialized is not a problem so long as the block group descriptors, which contain information regarding how much of the inode table has been initialized, has not been corrupted However, if the block group checksums are not valid, e2fsck must scan the entire inode table, and the the old, uninitialized data could potentially cause e2fsck to report false problems. Hence, it is important for the inode tables to be initialized as soon as possble. This commit adds this feature so that mke2fs can safely use the lazy inode table initialization feature to speed up formatting file systems. This is done via a new new kernel thread called ext4lazyinit, which is created on demand and destroyed, when it is no longer needed. There is only one thread for all ext4 filesystems in the system. When the first filesystem with inititable mount option is mounted, ext4lazyinit thread is created, then the filesystem can register its request in the request list. This thread then walks through the list of requests picking up scheduled requests and invoking ext4_init_inode_table(). Next schedule time for the request is computed by multiplying the time it took to zero out last inode table with wait multiplier, which can be set with the (init_itable=n) mount option (default is 10). We are doing this so we do not take the whole I/O bandwidth. When the thread is no longer necessary (request list is empty) it frees the appropriate structures and exits (and can be created later later by another filesystem). We do not disturb regular inode allocations in any way, it just do not care whether the inode table is, or is not zeroed. But when zeroing, we have to skip used inodes, obviously. Also we should prevent new inode allocations from the group, while zeroing is on the way. For that we take write alloc_sem lock in ext4_init_inode_table() and read alloc_sem in the ext4_claim_inode, so when we are unlucky and allocator hits the group which is currently being zeroed, it just has to wait. This can be suppresed using the mount option no_init_itable. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-28 01:30:05 +00:00
if (sb_rdonly(sb) ||
(test_opt(sb, NO_PREFETCH_BLOCK_BITMAPS) &&
(first_not_zeroed == ngroups || !test_opt(sb, INIT_INODE_TABLE))))
goto out;
ext4: add support for lazy inode table initialization When the lazy_itable_init extended option is passed to mke2fs, it considerably speeds up filesystem creation because inode tables are not zeroed out. The fact that parts of the inode table are uninitialized is not a problem so long as the block group descriptors, which contain information regarding how much of the inode table has been initialized, has not been corrupted However, if the block group checksums are not valid, e2fsck must scan the entire inode table, and the the old, uninitialized data could potentially cause e2fsck to report false problems. Hence, it is important for the inode tables to be initialized as soon as possble. This commit adds this feature so that mke2fs can safely use the lazy inode table initialization feature to speed up formatting file systems. This is done via a new new kernel thread called ext4lazyinit, which is created on demand and destroyed, when it is no longer needed. There is only one thread for all ext4 filesystems in the system. When the first filesystem with inititable mount option is mounted, ext4lazyinit thread is created, then the filesystem can register its request in the request list. This thread then walks through the list of requests picking up scheduled requests and invoking ext4_init_inode_table(). Next schedule time for the request is computed by multiplying the time it took to zero out last inode table with wait multiplier, which can be set with the (init_itable=n) mount option (default is 10). We are doing this so we do not take the whole I/O bandwidth. When the thread is no longer necessary (request list is empty) it frees the appropriate structures and exits (and can be created later later by another filesystem). We do not disturb regular inode allocations in any way, it just do not care whether the inode table is, or is not zeroed. But when zeroing, we have to skip used inodes, obviously. Also we should prevent new inode allocations from the group, while zeroing is on the way. For that we take write alloc_sem lock in ext4_init_inode_table() and read alloc_sem in the ext4_claim_inode, so when we are unlucky and allocator hits the group which is currently being zeroed, it just has to wait. This can be suppresed using the mount option no_init_itable. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-28 01:30:05 +00:00
elr = ext4_li_request_new(sb, first_not_zeroed);
if (!elr) {
ret = -ENOMEM;
goto out;
}
ext4: add support for lazy inode table initialization When the lazy_itable_init extended option is passed to mke2fs, it considerably speeds up filesystem creation because inode tables are not zeroed out. The fact that parts of the inode table are uninitialized is not a problem so long as the block group descriptors, which contain information regarding how much of the inode table has been initialized, has not been corrupted However, if the block group checksums are not valid, e2fsck must scan the entire inode table, and the the old, uninitialized data could potentially cause e2fsck to report false problems. Hence, it is important for the inode tables to be initialized as soon as possble. This commit adds this feature so that mke2fs can safely use the lazy inode table initialization feature to speed up formatting file systems. This is done via a new new kernel thread called ext4lazyinit, which is created on demand and destroyed, when it is no longer needed. There is only one thread for all ext4 filesystems in the system. When the first filesystem with inititable mount option is mounted, ext4lazyinit thread is created, then the filesystem can register its request in the request list. This thread then walks through the list of requests picking up scheduled requests and invoking ext4_init_inode_table(). Next schedule time for the request is computed by multiplying the time it took to zero out last inode table with wait multiplier, which can be set with the (init_itable=n) mount option (default is 10). We are doing this so we do not take the whole I/O bandwidth. When the thread is no longer necessary (request list is empty) it frees the appropriate structures and exits (and can be created later later by another filesystem). We do not disturb regular inode allocations in any way, it just do not care whether the inode table is, or is not zeroed. But when zeroing, we have to skip used inodes, obviously. Also we should prevent new inode allocations from the group, while zeroing is on the way. For that we take write alloc_sem lock in ext4_init_inode_table() and read alloc_sem in the ext4_claim_inode, so when we are unlucky and allocator hits the group which is currently being zeroed, it just has to wait. This can be suppresed using the mount option no_init_itable. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-28 01:30:05 +00:00
if (NULL == ext4_li_info) {
ret = ext4_li_info_new();
if (ret)
goto out;
}
mutex_lock(&ext4_li_info->li_list_mtx);
list_add(&elr->lr_request, &ext4_li_info->li_request_list);
mutex_unlock(&ext4_li_info->li_list_mtx);
sbi->s_li_request = elr;
/*
* set elr to NULL here since it has been inserted to
* the request_list and the removal and free of it is
* handled by ext4_clear_request_list from now on.
*/
elr = NULL;
ext4: add support for lazy inode table initialization When the lazy_itable_init extended option is passed to mke2fs, it considerably speeds up filesystem creation because inode tables are not zeroed out. The fact that parts of the inode table are uninitialized is not a problem so long as the block group descriptors, which contain information regarding how much of the inode table has been initialized, has not been corrupted However, if the block group checksums are not valid, e2fsck must scan the entire inode table, and the the old, uninitialized data could potentially cause e2fsck to report false problems. Hence, it is important for the inode tables to be initialized as soon as possble. This commit adds this feature so that mke2fs can safely use the lazy inode table initialization feature to speed up formatting file systems. This is done via a new new kernel thread called ext4lazyinit, which is created on demand and destroyed, when it is no longer needed. There is only one thread for all ext4 filesystems in the system. When the first filesystem with inititable mount option is mounted, ext4lazyinit thread is created, then the filesystem can register its request in the request list. This thread then walks through the list of requests picking up scheduled requests and invoking ext4_init_inode_table(). Next schedule time for the request is computed by multiplying the time it took to zero out last inode table with wait multiplier, which can be set with the (init_itable=n) mount option (default is 10). We are doing this so we do not take the whole I/O bandwidth. When the thread is no longer necessary (request list is empty) it frees the appropriate structures and exits (and can be created later later by another filesystem). We do not disturb regular inode allocations in any way, it just do not care whether the inode table is, or is not zeroed. But when zeroing, we have to skip used inodes, obviously. Also we should prevent new inode allocations from the group, while zeroing is on the way. For that we take write alloc_sem lock in ext4_init_inode_table() and read alloc_sem in the ext4_claim_inode, so when we are unlucky and allocator hits the group which is currently being zeroed, it just has to wait. This can be suppresed using the mount option no_init_itable. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-28 01:30:05 +00:00
if (!(ext4_li_info->li_state & EXT4_LAZYINIT_RUNNING)) {
ret = ext4_run_lazyinit_thread();
if (ret)
goto out;
}
out:
mutex_unlock(&ext4_li_mtx);
if (ret)
ext4: add support for lazy inode table initialization When the lazy_itable_init extended option is passed to mke2fs, it considerably speeds up filesystem creation because inode tables are not zeroed out. The fact that parts of the inode table are uninitialized is not a problem so long as the block group descriptors, which contain information regarding how much of the inode table has been initialized, has not been corrupted However, if the block group checksums are not valid, e2fsck must scan the entire inode table, and the the old, uninitialized data could potentially cause e2fsck to report false problems. Hence, it is important for the inode tables to be initialized as soon as possble. This commit adds this feature so that mke2fs can safely use the lazy inode table initialization feature to speed up formatting file systems. This is done via a new new kernel thread called ext4lazyinit, which is created on demand and destroyed, when it is no longer needed. There is only one thread for all ext4 filesystems in the system. When the first filesystem with inititable mount option is mounted, ext4lazyinit thread is created, then the filesystem can register its request in the request list. This thread then walks through the list of requests picking up scheduled requests and invoking ext4_init_inode_table(). Next schedule time for the request is computed by multiplying the time it took to zero out last inode table with wait multiplier, which can be set with the (init_itable=n) mount option (default is 10). We are doing this so we do not take the whole I/O bandwidth. When the thread is no longer necessary (request list is empty) it frees the appropriate structures and exits (and can be created later later by another filesystem). We do not disturb regular inode allocations in any way, it just do not care whether the inode table is, or is not zeroed. But when zeroing, we have to skip used inodes, obviously. Also we should prevent new inode allocations from the group, while zeroing is on the way. For that we take write alloc_sem lock in ext4_init_inode_table() and read alloc_sem in the ext4_claim_inode, so when we are unlucky and allocator hits the group which is currently being zeroed, it just has to wait. This can be suppresed using the mount option no_init_itable. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-28 01:30:05 +00:00
kfree(elr);
return ret;
}
/*
* We do not need to lock anything since this is called on
* module unload.
*/
static void ext4_destroy_lazyinit_thread(void)
{
/*
* If thread exited earlier
* there's nothing to be done.
*/
if (!ext4_li_info || !ext4_lazyinit_task)
ext4: add support for lazy inode table initialization When the lazy_itable_init extended option is passed to mke2fs, it considerably speeds up filesystem creation because inode tables are not zeroed out. The fact that parts of the inode table are uninitialized is not a problem so long as the block group descriptors, which contain information regarding how much of the inode table has been initialized, has not been corrupted However, if the block group checksums are not valid, e2fsck must scan the entire inode table, and the the old, uninitialized data could potentially cause e2fsck to report false problems. Hence, it is important for the inode tables to be initialized as soon as possble. This commit adds this feature so that mke2fs can safely use the lazy inode table initialization feature to speed up formatting file systems. This is done via a new new kernel thread called ext4lazyinit, which is created on demand and destroyed, when it is no longer needed. There is only one thread for all ext4 filesystems in the system. When the first filesystem with inititable mount option is mounted, ext4lazyinit thread is created, then the filesystem can register its request in the request list. This thread then walks through the list of requests picking up scheduled requests and invoking ext4_init_inode_table(). Next schedule time for the request is computed by multiplying the time it took to zero out last inode table with wait multiplier, which can be set with the (init_itable=n) mount option (default is 10). We are doing this so we do not take the whole I/O bandwidth. When the thread is no longer necessary (request list is empty) it frees the appropriate structures and exits (and can be created later later by another filesystem). We do not disturb regular inode allocations in any way, it just do not care whether the inode table is, or is not zeroed. But when zeroing, we have to skip used inodes, obviously. Also we should prevent new inode allocations from the group, while zeroing is on the way. For that we take write alloc_sem lock in ext4_init_inode_table() and read alloc_sem in the ext4_claim_inode, so when we are unlucky and allocator hits the group which is currently being zeroed, it just has to wait. This can be suppresed using the mount option no_init_itable. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-28 01:30:05 +00:00
return;
kthread_stop(ext4_lazyinit_task);
ext4: add support for lazy inode table initialization When the lazy_itable_init extended option is passed to mke2fs, it considerably speeds up filesystem creation because inode tables are not zeroed out. The fact that parts of the inode table are uninitialized is not a problem so long as the block group descriptors, which contain information regarding how much of the inode table has been initialized, has not been corrupted However, if the block group checksums are not valid, e2fsck must scan the entire inode table, and the the old, uninitialized data could potentially cause e2fsck to report false problems. Hence, it is important for the inode tables to be initialized as soon as possble. This commit adds this feature so that mke2fs can safely use the lazy inode table initialization feature to speed up formatting file systems. This is done via a new new kernel thread called ext4lazyinit, which is created on demand and destroyed, when it is no longer needed. There is only one thread for all ext4 filesystems in the system. When the first filesystem with inititable mount option is mounted, ext4lazyinit thread is created, then the filesystem can register its request in the request list. This thread then walks through the list of requests picking up scheduled requests and invoking ext4_init_inode_table(). Next schedule time for the request is computed by multiplying the time it took to zero out last inode table with wait multiplier, which can be set with the (init_itable=n) mount option (default is 10). We are doing this so we do not take the whole I/O bandwidth. When the thread is no longer necessary (request list is empty) it frees the appropriate structures and exits (and can be created later later by another filesystem). We do not disturb regular inode allocations in any way, it just do not care whether the inode table is, or is not zeroed. But when zeroing, we have to skip used inodes, obviously. Also we should prevent new inode allocations from the group, while zeroing is on the way. For that we take write alloc_sem lock in ext4_init_inode_table() and read alloc_sem in the ext4_claim_inode, so when we are unlucky and allocator hits the group which is currently being zeroed, it just has to wait. This can be suppresed using the mount option no_init_itable. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-28 01:30:05 +00:00
}
static int set_journal_csum_feature_set(struct super_block *sb)
{
int ret = 1;
int compat, incompat;
struct ext4_sb_info *sbi = EXT4_SB(sb);
if (ext4_has_metadata_csum(sb)) {
/* journal checksum v3 */
compat = 0;
incompat = JBD2_FEATURE_INCOMPAT_CSUM_V3;
} else {
/* journal checksum v1 */
compat = JBD2_FEATURE_COMPAT_CHECKSUM;
incompat = 0;
}
jbd2_journal_clear_features(sbi->s_journal,
JBD2_FEATURE_COMPAT_CHECKSUM, 0,
JBD2_FEATURE_INCOMPAT_CSUM_V3 |
JBD2_FEATURE_INCOMPAT_CSUM_V2);
if (test_opt(sb, JOURNAL_ASYNC_COMMIT)) {
ret = jbd2_journal_set_features(sbi->s_journal,
compat, 0,
JBD2_FEATURE_INCOMPAT_ASYNC_COMMIT |
incompat);
} else if (test_opt(sb, JOURNAL_CHECKSUM)) {
ret = jbd2_journal_set_features(sbi->s_journal,
compat, 0,
incompat);
jbd2_journal_clear_features(sbi->s_journal, 0, 0,
JBD2_FEATURE_INCOMPAT_ASYNC_COMMIT);
} else {
jbd2_journal_clear_features(sbi->s_journal, 0, 0,
JBD2_FEATURE_INCOMPAT_ASYNC_COMMIT);
}
return ret;
}
/*
* Note: calculating the overhead so we can be compatible with
* historical BSD practice is quite difficult in the face of
* clusters/bigalloc. This is because multiple metadata blocks from
* different block group can end up in the same allocation cluster.
* Calculating the exact overhead in the face of clustered allocation
* requires either O(all block bitmaps) in memory or O(number of block
* groups**2) in time. We will still calculate the superblock for
* older file systems --- and if we come across with a bigalloc file
* system with zero in s_overhead_clusters the estimate will be close to
* correct especially for very large cluster sizes --- but for newer
* file systems, it's better to calculate this figure once at mkfs
* time, and store it in the superblock. If the superblock value is
* present (even for non-bigalloc file systems), we will use it.
*/
static int count_overhead(struct super_block *sb, ext4_group_t grp,
char *buf)
{
struct ext4_sb_info *sbi = EXT4_SB(sb);
struct ext4_group_desc *gdp;
ext4_fsblk_t first_block, last_block, b;
ext4_group_t i, ngroups = ext4_get_groups_count(sb);
int s, j, count = 0;
int has_super = ext4_bg_has_super(sb, grp);
if (!ext4_has_feature_bigalloc(sb))
return (has_super + ext4_bg_num_gdb(sb, grp) +
(has_super ? le16_to_cpu(sbi->s_es->s_reserved_gdt_blocks) : 0) +
sbi->s_itb_per_group + 2);
first_block = le32_to_cpu(sbi->s_es->s_first_data_block) +
(grp * EXT4_BLOCKS_PER_GROUP(sb));
last_block = first_block + EXT4_BLOCKS_PER_GROUP(sb) - 1;
for (i = 0; i < ngroups; i++) {
gdp = ext4_get_group_desc(sb, i, NULL);
b = ext4_block_bitmap(sb, gdp);
if (b >= first_block && b <= last_block) {
ext4_set_bit(EXT4_B2C(sbi, b - first_block), buf);
count++;
}
b = ext4_inode_bitmap(sb, gdp);
if (b >= first_block && b <= last_block) {
ext4_set_bit(EXT4_B2C(sbi, b - first_block), buf);
count++;
}
b = ext4_inode_table(sb, gdp);
if (b >= first_block && b + sbi->s_itb_per_group <= last_block)
for (j = 0; j < sbi->s_itb_per_group; j++, b++) {
int c = EXT4_B2C(sbi, b - first_block);
ext4_set_bit(c, buf);
count++;
}
if (i != grp)
continue;
s = 0;
if (ext4_bg_has_super(sb, grp)) {
ext4_set_bit(s++, buf);
count++;
}
j = ext4_bg_num_gdb(sb, grp);
if (s + j > EXT4_BLOCKS_PER_GROUP(sb)) {
ext4_error(sb, "Invalid number of block group "
"descriptor blocks: %d", j);
j = EXT4_BLOCKS_PER_GROUP(sb) - s;
}
count += j;
for (; j > 0; j--)
ext4_set_bit(EXT4_B2C(sbi, s++), buf);
}
if (!count)
return 0;
return EXT4_CLUSTERS_PER_GROUP(sb) -
ext4_count_free(buf, EXT4_CLUSTERS_PER_GROUP(sb) / 8);
}
/*
* Compute the overhead and stash it in sbi->s_overhead
*/
int ext4_calculate_overhead(struct super_block *sb)
{
struct ext4_sb_info *sbi = EXT4_SB(sb);
struct ext4_super_block *es = sbi->s_es;
struct inode *j_inode;
unsigned int j_blocks, j_inum = le32_to_cpu(es->s_journal_inum);
ext4_group_t i, ngroups = ext4_get_groups_count(sb);
ext4_fsblk_t overhead = 0;
char *buf = (char *) get_zeroed_page(GFP_NOFS);
if (!buf)
return -ENOMEM;
/*
* Compute the overhead (FS structures). This is constant
* for a given filesystem unless the number of block groups
* changes so we cache the previous value until it does.
*/
/*
* All of the blocks before first_data_block are overhead
*/
overhead = EXT4_B2C(sbi, le32_to_cpu(es->s_first_data_block));
/*
* Add the overhead found in each block group
*/
for (i = 0; i < ngroups; i++) {
int blks;
blks = count_overhead(sb, i, buf);
overhead += blks;
if (blks)
memset(buf, 0, PAGE_SIZE);
cond_resched();
}
/*
* Add the internal journal blocks whether the journal has been
* loaded or not
*/
if (sbi->s_journal && !sbi->s_journal_bdev_file)
overhead += EXT4_NUM_B2C(sbi, sbi->s_journal->j_total_len);
ext4: check for non-zero journal inum in ext4_calculate_overhead While calculating overhead for internal journal, also check that j_inum shouldn't be 0. Otherwise we get below error with xfstests generic/050 with external journal (XXX_LOGDEV config) enabled. It could be simply reproduced with loop device with an external journal and marking blockdev as RO before mounting. [ 3337.146838] EXT4-fs error (device pmem1p2): ext4_get_journal_inode:4634: comm mount: inode #0: comm mount: iget: illegal inode # ------------[ cut here ]------------ generic_make_request: Trying to write to read-only block-device pmem1p2 (partno 2) WARNING: CPU: 107 PID: 115347 at block/blk-core.c:788 generic_make_request_checks+0x6b4/0x7d0 CPU: 107 PID: 115347 Comm: mount Tainted: G L --------- -t - 4.18.0-167.el8.ppc64le #1 NIP: c0000000006f6d44 LR: c0000000006f6d40 CTR: 0000000030041dd4 <...> NIP [c0000000006f6d44] generic_make_request_checks+0x6b4/0x7d0 LR [c0000000006f6d40] generic_make_request_checks+0x6b0/0x7d0 <...> Call Trace: generic_make_request_checks+0x6b0/0x7d0 (unreliable) generic_make_request+0x3c/0x420 submit_bio+0xd8/0x200 submit_bh_wbc+0x1e8/0x250 __sync_dirty_buffer+0xd0/0x210 ext4_commit_super+0x310/0x420 [ext4] __ext4_error+0xa4/0x1e0 [ext4] __ext4_iget+0x388/0xe10 [ext4] ext4_get_journal_inode+0x40/0x150 [ext4] ext4_calculate_overhead+0x5a8/0x610 [ext4] ext4_fill_super+0x3188/0x3260 [ext4] mount_bdev+0x778/0x8f0 ext4_mount+0x28/0x50 [ext4] mount_fs+0x74/0x230 vfs_kern_mount.part.6+0x6c/0x250 do_mount+0x2fc/0x1280 sys_mount+0x158/0x180 system_call+0x5c/0x70 EXT4-fs (pmem1p2): no journal found EXT4-fs (pmem1p2): can't get journal size EXT4-fs (pmem1p2): mounted filesystem without journal. Opts: dax,norecovery Fixes: 3c816ded78bb ("ext4: use journal inode to determine journal overhead") Reported-by: Harish Sriram <harish@linux.ibm.com> Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20200316093038.25485-1-riteshh@linux.ibm.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-03-16 09:30:38 +00:00
else if (ext4_has_feature_journal(sb) && !sbi->s_journal && j_inum) {
/* j_inum for internal journal is non-zero */
j_inode = ext4_get_journal_inode(sb, j_inum);
if (!IS_ERR(j_inode)) {
j_blocks = j_inode->i_size >> sb->s_blocksize_bits;
overhead += EXT4_NUM_B2C(sbi, j_blocks);
iput(j_inode);
} else {
ext4_msg(sb, KERN_ERR, "can't get journal size");
}
}
sbi->s_overhead = overhead;
smp_wmb();
free_page((unsigned long) buf);
return 0;
}
static void ext4_set_resv_clusters(struct super_block *sb)
ext4: introduce reserved space Currently in ENOSPC condition when writing into unwritten space, or punching a hole, we might need to split the extent and grow extent tree. However since we can not allocate any new metadata blocks we'll have to zero out unwritten part of extent or punched out part of extent, or in the worst case return ENOSPC even though use actually does not allocate any space. Also in delalloc path we do reserve metadata and data blocks for the time we're going to write out, however metadata block reservation is very tricky especially since we expect that logical connectivity implies physical connectivity, however that might not be the case and hence we might end up allocating more metadata blocks than previously reserved. So in future, metadata reservation checks should be removed since we can not assure that we do not under reserve. And this is where reserved space comes into the picture. When mounting the file system we slice off a little bit of the file system space (2% or 4096 clusters, whichever is smaller) which can be then used for the cases mentioned above to prevent costly zeroout, or unexpected ENOSPC. The number of reserved clusters can be set via sysfs, however it can never be bigger than number of free clusters in the file system. Note that this patch fixes the failure of xfstest 274 as expected. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
2013-04-10 02:11:22 +00:00
{
ext4_fsblk_t resv_clusters;
struct ext4_sb_info *sbi = EXT4_SB(sb);
ext4: introduce reserved space Currently in ENOSPC condition when writing into unwritten space, or punching a hole, we might need to split the extent and grow extent tree. However since we can not allocate any new metadata blocks we'll have to zero out unwritten part of extent or punched out part of extent, or in the worst case return ENOSPC even though use actually does not allocate any space. Also in delalloc path we do reserve metadata and data blocks for the time we're going to write out, however metadata block reservation is very tricky especially since we expect that logical connectivity implies physical connectivity, however that might not be the case and hence we might end up allocating more metadata blocks than previously reserved. So in future, metadata reservation checks should be removed since we can not assure that we do not under reserve. And this is where reserved space comes into the picture. When mounting the file system we slice off a little bit of the file system space (2% or 4096 clusters, whichever is smaller) which can be then used for the cases mentioned above to prevent costly zeroout, or unexpected ENOSPC. The number of reserved clusters can be set via sysfs, however it can never be bigger than number of free clusters in the file system. Note that this patch fixes the failure of xfstest 274 as expected. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
2013-04-10 02:11:22 +00:00
/*
* There's no need to reserve anything when we aren't using extents.
* The space estimates are exact, there are no unwritten extents,
* hole punching doesn't need new metadata... This is needed especially
* to keep ext2/3 backward compatibility.
*/
if (!ext4_has_feature_extents(sb))
return;
ext4: introduce reserved space Currently in ENOSPC condition when writing into unwritten space, or punching a hole, we might need to split the extent and grow extent tree. However since we can not allocate any new metadata blocks we'll have to zero out unwritten part of extent or punched out part of extent, or in the worst case return ENOSPC even though use actually does not allocate any space. Also in delalloc path we do reserve metadata and data blocks for the time we're going to write out, however metadata block reservation is very tricky especially since we expect that logical connectivity implies physical connectivity, however that might not be the case and hence we might end up allocating more metadata blocks than previously reserved. So in future, metadata reservation checks should be removed since we can not assure that we do not under reserve. And this is where reserved space comes into the picture. When mounting the file system we slice off a little bit of the file system space (2% or 4096 clusters, whichever is smaller) which can be then used for the cases mentioned above to prevent costly zeroout, or unexpected ENOSPC. The number of reserved clusters can be set via sysfs, however it can never be bigger than number of free clusters in the file system. Note that this patch fixes the failure of xfstest 274 as expected. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
2013-04-10 02:11:22 +00:00
/*
* By default we reserve 2% or 4096 clusters, whichever is smaller.
* This should cover the situations where we can not afford to run
* out of space like for example punch hole, or converting
* unwritten extents in delalloc path. In most cases such
ext4: introduce reserved space Currently in ENOSPC condition when writing into unwritten space, or punching a hole, we might need to split the extent and grow extent tree. However since we can not allocate any new metadata blocks we'll have to zero out unwritten part of extent or punched out part of extent, or in the worst case return ENOSPC even though use actually does not allocate any space. Also in delalloc path we do reserve metadata and data blocks for the time we're going to write out, however metadata block reservation is very tricky especially since we expect that logical connectivity implies physical connectivity, however that might not be the case and hence we might end up allocating more metadata blocks than previously reserved. So in future, metadata reservation checks should be removed since we can not assure that we do not under reserve. And this is where reserved space comes into the picture. When mounting the file system we slice off a little bit of the file system space (2% or 4096 clusters, whichever is smaller) which can be then used for the cases mentioned above to prevent costly zeroout, or unexpected ENOSPC. The number of reserved clusters can be set via sysfs, however it can never be bigger than number of free clusters in the file system. Note that this patch fixes the failure of xfstest 274 as expected. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
2013-04-10 02:11:22 +00:00
* allocation would require 1, or 2 blocks, higher numbers are
* very rare.
*/
resv_clusters = (ext4_blocks_count(sbi->s_es) >>
sbi->s_cluster_bits);
ext4: introduce reserved space Currently in ENOSPC condition when writing into unwritten space, or punching a hole, we might need to split the extent and grow extent tree. However since we can not allocate any new metadata blocks we'll have to zero out unwritten part of extent or punched out part of extent, or in the worst case return ENOSPC even though use actually does not allocate any space. Also in delalloc path we do reserve metadata and data blocks for the time we're going to write out, however metadata block reservation is very tricky especially since we expect that logical connectivity implies physical connectivity, however that might not be the case and hence we might end up allocating more metadata blocks than previously reserved. So in future, metadata reservation checks should be removed since we can not assure that we do not under reserve. And this is where reserved space comes into the picture. When mounting the file system we slice off a little bit of the file system space (2% or 4096 clusters, whichever is smaller) which can be then used for the cases mentioned above to prevent costly zeroout, or unexpected ENOSPC. The number of reserved clusters can be set via sysfs, however it can never be bigger than number of free clusters in the file system. Note that this patch fixes the failure of xfstest 274 as expected. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
2013-04-10 02:11:22 +00:00
do_div(resv_clusters, 50);
resv_clusters = min_t(ext4_fsblk_t, resv_clusters, 4096);
atomic64_set(&sbi->s_resv_clusters, resv_clusters);
ext4: introduce reserved space Currently in ENOSPC condition when writing into unwritten space, or punching a hole, we might need to split the extent and grow extent tree. However since we can not allocate any new metadata blocks we'll have to zero out unwritten part of extent or punched out part of extent, or in the worst case return ENOSPC even though use actually does not allocate any space. Also in delalloc path we do reserve metadata and data blocks for the time we're going to write out, however metadata block reservation is very tricky especially since we expect that logical connectivity implies physical connectivity, however that might not be the case and hence we might end up allocating more metadata blocks than previously reserved. So in future, metadata reservation checks should be removed since we can not assure that we do not under reserve. And this is where reserved space comes into the picture. When mounting the file system we slice off a little bit of the file system space (2% or 4096 clusters, whichever is smaller) which can be then used for the cases mentioned above to prevent costly zeroout, or unexpected ENOSPC. The number of reserved clusters can be set via sysfs, however it can never be bigger than number of free clusters in the file system. Note that this patch fixes the failure of xfstest 274 as expected. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
2013-04-10 02:11:22 +00:00
}
static const char *ext4_quota_mode(struct super_block *sb)
{
#ifdef CONFIG_QUOTA
if (!ext4_quota_capable(sb))
return "none";
if (EXT4_SB(sb)->s_journal && ext4_is_quota_journalled(sb))
return "journalled";
else
return "writeback";
#else
return "disabled";
#endif
}
static void ext4_setup_csum_trigger(struct super_block *sb,
enum ext4_journal_trigger_type type,
void (*trigger)(
struct jbd2_buffer_trigger_type *type,
struct buffer_head *bh,
void *mapped_data,
size_t size))
{
struct ext4_sb_info *sbi = EXT4_SB(sb);
sbi->s_journal_triggers[type].sb = sb;
sbi->s_journal_triggers[type].tr_triggers.t_frozen = trigger;
}
ext4: Completely separate options parsing and sb setup The new mount api separates option parsing and super block setup into two distinct steps and so we need to separate the options parsing out of the ext4_fill_super() and ext4_remount(). In order to achieve this we have to create new ext4_fill_super() and ext4_remount() functions which will serve its purpose only until we actually do convert to the new api (as such they are only temporary for this patch series) and move the option parsing out of the old function which will now be renamed to __ext4_fill_super() and __ext4_remount(). There is a small complication in the fact that while the mount option parsing is going to happen before we get to __ext4_fill_super(), the mount options stored in the super block itself needs to be applied first, before the user specified mount options. So with this patch we're going through the following sequence: - parse user provided options (including sb block) - initialize sbi and store s_sb_block if provided - in __ext4_fill_super() - read the super block - parse and apply options specified in s_mount_opts - check and apply user provided options stored in ctx - continue with the regular ext4_fill_super operation It's not exactly the most elegant solution, but if we still want to support s_mount_opts we have to do it in this order. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Link: https://lore.kernel.org/r/20211027141857.33657-10-lczerner@redhat.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2021-10-27 14:18:53 +00:00
static void ext4_free_sbi(struct ext4_sb_info *sbi)
{
if (!sbi)
return;
kfree(sbi->s_blockgroup_lock);
dax: introduce holder for dax_device Patch series "v14 fsdax-rmap + v11 fsdax-reflink", v2. The patchset fsdax-rmap is aimed to support shared pages tracking for fsdax. It moves owner tracking from dax_assocaite_entry() to pmem device driver, by introducing an interface ->memory_failure() for struct pagemap. This interface is called by memory_failure() in mm, and implemented by pmem device. Then call holder operations to find the filesystem which the corrupted data located in, and call filesystem handler to track files or metadata associated with this page. Finally we are able to try to fix the corrupted data in filesystem and do other necessary processing, such as killing processes who are using the files affected. The call trace is like this: memory_failure() |* fsdax case |------------ |pgmap->ops->memory_failure() => pmem_pgmap_memory_failure() | dax_holder_notify_failure() => | dax_device->holder_ops->notify_failure() => | - xfs_dax_notify_failure() | |* xfs_dax_notify_failure() | |-------------------------- | | xfs_rmap_query_range() | | xfs_dax_failure_fn() | | * corrupted on metadata | | try to recover data, call xfs_force_shutdown() | | * corrupted on file data | | try to recover data, call mf_dax_kill_procs() |* normal case |------------- |mf_generic_kill_procs() The patchset fsdax-reflink attempts to add CoW support for fsdax, and takes XFS, which has both reflink and fsdax features, as an example. One of the key mechanisms needed to be implemented in fsdax is CoW. Copy the data from srcmap before we actually write data to the destination iomap. And we just copy range in which data won't be changed. Another mechanism is range comparison. In page cache case, readpage() is used to load data on disk to page cache in order to be able to compare data. In fsdax case, readpage() does not work. So, we need another compare data with direct access support. With the two mechanisms implemented in fsdax, we are able to make reflink and fsdax work together in XFS. This patch (of 14): To easily track filesystem from a pmem device, we introduce a holder for dax_device structure, and also its operation. This holder is used to remember who is using this dax_device: - When it is the backend of a filesystem, the holder will be the instance of this filesystem. - When this pmem device is one of the targets in a mapped device, the holder will be this mapped device. In this case, the mapped device has its own dax_device and it will follow the first rule. So that we can finally track to the filesystem we needed. The holder and holder_ops will be set when filesystem is being mounted, or an target device is being activated. Link: https://lkml.kernel.org/r/20220603053738.1218681-1-ruansy.fnst@fujitsu.com Link: https://lkml.kernel.org/r/20220603053738.1218681-2-ruansy.fnst@fujitsu.com Signed-off-by: Shiyang Ruan <ruansy.fnst@fujitsu.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dan Williams <dan.j.wiliams@intel.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Jane Chu <jane.chu@oracle.com> Cc: Goldwyn Rodrigues <rgoldwyn@suse.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Matthew Wilcox <willy@infradead.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Goldwyn Rodrigues <rgoldwyn@suse.com> Cc: Ritesh Harjani <riteshh@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-06-03 05:37:25 +00:00
fs_put_dax(sbi->s_daxdev, NULL);
ext4: Completely separate options parsing and sb setup The new mount api separates option parsing and super block setup into two distinct steps and so we need to separate the options parsing out of the ext4_fill_super() and ext4_remount(). In order to achieve this we have to create new ext4_fill_super() and ext4_remount() functions which will serve its purpose only until we actually do convert to the new api (as such they are only temporary for this patch series) and move the option parsing out of the old function which will now be renamed to __ext4_fill_super() and __ext4_remount(). There is a small complication in the fact that while the mount option parsing is going to happen before we get to __ext4_fill_super(), the mount options stored in the super block itself needs to be applied first, before the user specified mount options. So with this patch we're going through the following sequence: - parse user provided options (including sb block) - initialize sbi and store s_sb_block if provided - in __ext4_fill_super() - read the super block - parse and apply options specified in s_mount_opts - check and apply user provided options stored in ctx - continue with the regular ext4_fill_super operation It's not exactly the most elegant solution, but if we still want to support s_mount_opts we have to do it in this order. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Link: https://lore.kernel.org/r/20211027141857.33657-10-lczerner@redhat.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2021-10-27 14:18:53 +00:00
kfree(sbi);
}
static struct ext4_sb_info *ext4_alloc_sbi(struct super_block *sb)
{
struct ext4_sb_info *sbi;
sbi = kzalloc(sizeof(*sbi), GFP_KERNEL);
if (!sbi)
return NULL;
dax: introduce holder for dax_device Patch series "v14 fsdax-rmap + v11 fsdax-reflink", v2. The patchset fsdax-rmap is aimed to support shared pages tracking for fsdax. It moves owner tracking from dax_assocaite_entry() to pmem device driver, by introducing an interface ->memory_failure() for struct pagemap. This interface is called by memory_failure() in mm, and implemented by pmem device. Then call holder operations to find the filesystem which the corrupted data located in, and call filesystem handler to track files or metadata associated with this page. Finally we are able to try to fix the corrupted data in filesystem and do other necessary processing, such as killing processes who are using the files affected. The call trace is like this: memory_failure() |* fsdax case |------------ |pgmap->ops->memory_failure() => pmem_pgmap_memory_failure() | dax_holder_notify_failure() => | dax_device->holder_ops->notify_failure() => | - xfs_dax_notify_failure() | |* xfs_dax_notify_failure() | |-------------------------- | | xfs_rmap_query_range() | | xfs_dax_failure_fn() | | * corrupted on metadata | | try to recover data, call xfs_force_shutdown() | | * corrupted on file data | | try to recover data, call mf_dax_kill_procs() |* normal case |------------- |mf_generic_kill_procs() The patchset fsdax-reflink attempts to add CoW support for fsdax, and takes XFS, which has both reflink and fsdax features, as an example. One of the key mechanisms needed to be implemented in fsdax is CoW. Copy the data from srcmap before we actually write data to the destination iomap. And we just copy range in which data won't be changed. Another mechanism is range comparison. In page cache case, readpage() is used to load data on disk to page cache in order to be able to compare data. In fsdax case, readpage() does not work. So, we need another compare data with direct access support. With the two mechanisms implemented in fsdax, we are able to make reflink and fsdax work together in XFS. This patch (of 14): To easily track filesystem from a pmem device, we introduce a holder for dax_device structure, and also its operation. This holder is used to remember who is using this dax_device: - When it is the backend of a filesystem, the holder will be the instance of this filesystem. - When this pmem device is one of the targets in a mapped device, the holder will be this mapped device. In this case, the mapped device has its own dax_device and it will follow the first rule. So that we can finally track to the filesystem we needed. The holder and holder_ops will be set when filesystem is being mounted, or an target device is being activated. Link: https://lkml.kernel.org/r/20220603053738.1218681-1-ruansy.fnst@fujitsu.com Link: https://lkml.kernel.org/r/20220603053738.1218681-2-ruansy.fnst@fujitsu.com Signed-off-by: Shiyang Ruan <ruansy.fnst@fujitsu.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dan Williams <dan.j.wiliams@intel.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Jane Chu <jane.chu@oracle.com> Cc: Goldwyn Rodrigues <rgoldwyn@suse.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Matthew Wilcox <willy@infradead.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Goldwyn Rodrigues <rgoldwyn@suse.com> Cc: Ritesh Harjani <riteshh@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-06-03 05:37:25 +00:00
sbi->s_daxdev = fs_dax_get_by_bdev(sb->s_bdev, &sbi->s_dax_part_off,
NULL, NULL);
ext4: Completely separate options parsing and sb setup The new mount api separates option parsing and super block setup into two distinct steps and so we need to separate the options parsing out of the ext4_fill_super() and ext4_remount(). In order to achieve this we have to create new ext4_fill_super() and ext4_remount() functions which will serve its purpose only until we actually do convert to the new api (as such they are only temporary for this patch series) and move the option parsing out of the old function which will now be renamed to __ext4_fill_super() and __ext4_remount(). There is a small complication in the fact that while the mount option parsing is going to happen before we get to __ext4_fill_super(), the mount options stored in the super block itself needs to be applied first, before the user specified mount options. So with this patch we're going through the following sequence: - parse user provided options (including sb block) - initialize sbi and store s_sb_block if provided - in __ext4_fill_super() - read the super block - parse and apply options specified in s_mount_opts - check and apply user provided options stored in ctx - continue with the regular ext4_fill_super operation It's not exactly the most elegant solution, but if we still want to support s_mount_opts we have to do it in this order. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Link: https://lore.kernel.org/r/20211027141857.33657-10-lczerner@redhat.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2021-10-27 14:18:53 +00:00
sbi->s_blockgroup_lock =
kzalloc(sizeof(struct blockgroup_lock), GFP_KERNEL);
if (!sbi->s_blockgroup_lock)
goto err_out;
sb->s_fs_info = sbi;
sbi->s_sb = sb;
return sbi;
err_out:
dax: introduce holder for dax_device Patch series "v14 fsdax-rmap + v11 fsdax-reflink", v2. The patchset fsdax-rmap is aimed to support shared pages tracking for fsdax. It moves owner tracking from dax_assocaite_entry() to pmem device driver, by introducing an interface ->memory_failure() for struct pagemap. This interface is called by memory_failure() in mm, and implemented by pmem device. Then call holder operations to find the filesystem which the corrupted data located in, and call filesystem handler to track files or metadata associated with this page. Finally we are able to try to fix the corrupted data in filesystem and do other necessary processing, such as killing processes who are using the files affected. The call trace is like this: memory_failure() |* fsdax case |------------ |pgmap->ops->memory_failure() => pmem_pgmap_memory_failure() | dax_holder_notify_failure() => | dax_device->holder_ops->notify_failure() => | - xfs_dax_notify_failure() | |* xfs_dax_notify_failure() | |-------------------------- | | xfs_rmap_query_range() | | xfs_dax_failure_fn() | | * corrupted on metadata | | try to recover data, call xfs_force_shutdown() | | * corrupted on file data | | try to recover data, call mf_dax_kill_procs() |* normal case |------------- |mf_generic_kill_procs() The patchset fsdax-reflink attempts to add CoW support for fsdax, and takes XFS, which has both reflink and fsdax features, as an example. One of the key mechanisms needed to be implemented in fsdax is CoW. Copy the data from srcmap before we actually write data to the destination iomap. And we just copy range in which data won't be changed. Another mechanism is range comparison. In page cache case, readpage() is used to load data on disk to page cache in order to be able to compare data. In fsdax case, readpage() does not work. So, we need another compare data with direct access support. With the two mechanisms implemented in fsdax, we are able to make reflink and fsdax work together in XFS. This patch (of 14): To easily track filesystem from a pmem device, we introduce a holder for dax_device structure, and also its operation. This holder is used to remember who is using this dax_device: - When it is the backend of a filesystem, the holder will be the instance of this filesystem. - When this pmem device is one of the targets in a mapped device, the holder will be this mapped device. In this case, the mapped device has its own dax_device and it will follow the first rule. So that we can finally track to the filesystem we needed. The holder and holder_ops will be set when filesystem is being mounted, or an target device is being activated. Link: https://lkml.kernel.org/r/20220603053738.1218681-1-ruansy.fnst@fujitsu.com Link: https://lkml.kernel.org/r/20220603053738.1218681-2-ruansy.fnst@fujitsu.com Signed-off-by: Shiyang Ruan <ruansy.fnst@fujitsu.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dan Williams <dan.j.wiliams@intel.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Jane Chu <jane.chu@oracle.com> Cc: Goldwyn Rodrigues <rgoldwyn@suse.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Matthew Wilcox <willy@infradead.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Goldwyn Rodrigues <rgoldwyn@suse.com> Cc: Ritesh Harjani <riteshh@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-06-03 05:37:25 +00:00
fs_put_dax(sbi->s_daxdev, NULL);
ext4: Completely separate options parsing and sb setup The new mount api separates option parsing and super block setup into two distinct steps and so we need to separate the options parsing out of the ext4_fill_super() and ext4_remount(). In order to achieve this we have to create new ext4_fill_super() and ext4_remount() functions which will serve its purpose only until we actually do convert to the new api (as such they are only temporary for this patch series) and move the option parsing out of the old function which will now be renamed to __ext4_fill_super() and __ext4_remount(). There is a small complication in the fact that while the mount option parsing is going to happen before we get to __ext4_fill_super(), the mount options stored in the super block itself needs to be applied first, before the user specified mount options. So with this patch we're going through the following sequence: - parse user provided options (including sb block) - initialize sbi and store s_sb_block if provided - in __ext4_fill_super() - read the super block - parse and apply options specified in s_mount_opts - check and apply user provided options stored in ctx - continue with the regular ext4_fill_super operation It's not exactly the most elegant solution, but if we still want to support s_mount_opts we have to do it in this order. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Link: https://lore.kernel.org/r/20211027141857.33657-10-lczerner@redhat.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2021-10-27 14:18:53 +00:00
kfree(sbi);
return NULL;
}
static void ext4_set_def_opts(struct super_block *sb,
struct ext4_super_block *es)
{
unsigned long def_mount_opts;
/* Set defaults before we parse the mount options */
def_mount_opts = le32_to_cpu(es->s_default_mount_opts);
set_opt(sb, INIT_INODE_TABLE);
if (def_mount_opts & EXT4_DEFM_DEBUG)
set_opt(sb, DEBUG);
if (def_mount_opts & EXT4_DEFM_BSDGROUPS)
set_opt(sb, GRPID);
if (def_mount_opts & EXT4_DEFM_UID16)
set_opt(sb, NO_UID32);
/* xattr user namespace & acls are now defaulted on */
set_opt(sb, XATTR_USER);
#ifdef CONFIG_EXT4_FS_POSIX_ACL
set_opt(sb, POSIX_ACL);
#endif
if (ext4_has_feature_fast_commit(sb))
set_opt2(sb, JOURNAL_FAST_COMMIT);
/* don't forget to enable journal_csum when metadata_csum is enabled. */
if (ext4_has_metadata_csum(sb))
set_opt(sb, JOURNAL_CHECKSUM);
if ((def_mount_opts & EXT4_DEFM_JMODE) == EXT4_DEFM_JMODE_DATA)
set_opt(sb, JOURNAL_DATA);
else if ((def_mount_opts & EXT4_DEFM_JMODE) == EXT4_DEFM_JMODE_ORDERED)
set_opt(sb, ORDERED_DATA);
else if ((def_mount_opts & EXT4_DEFM_JMODE) == EXT4_DEFM_JMODE_WBACK)
set_opt(sb, WRITEBACK_DATA);
if (le16_to_cpu(es->s_errors) == EXT4_ERRORS_PANIC)
set_opt(sb, ERRORS_PANIC);
else if (le16_to_cpu(es->s_errors) == EXT4_ERRORS_CONTINUE)
set_opt(sb, ERRORS_CONT);
else
set_opt(sb, ERRORS_RO);
/* block_validity enabled by default; disable with noblock_validity */
set_opt(sb, BLOCK_VALIDITY);
if (def_mount_opts & EXT4_DEFM_DISCARD)
set_opt(sb, DISCARD);
if ((def_mount_opts & EXT4_DEFM_NOBARRIER) == 0)
set_opt(sb, BARRIER);
/*
* enable delayed allocation by default
* Use -o nodelalloc to turn it off
*/
if (!IS_EXT3_SB(sb) && !IS_EXT2_SB(sb) &&
((def_mount_opts & EXT4_DEFM_NODELALLOC) == 0))
set_opt(sb, DELALLOC);
if (sb->s_blocksize <= PAGE_SIZE)
set_opt(sb, DIOREAD_NOLOCK);
}
static int ext4_handle_clustersize(struct super_block *sb)
{
struct ext4_sb_info *sbi = EXT4_SB(sb);
struct ext4_super_block *es = sbi->s_es;
int clustersize;
/* Handle clustersize */
clustersize = BLOCK_SIZE << le32_to_cpu(es->s_log_cluster_size);
if (ext4_has_feature_bigalloc(sb)) {
if (clustersize < sb->s_blocksize) {
ext4_msg(sb, KERN_ERR,
"cluster size (%d) smaller than "
"block size (%lu)", clustersize, sb->s_blocksize);
return -EINVAL;
}
sbi->s_cluster_bits = le32_to_cpu(es->s_log_cluster_size) -
le32_to_cpu(es->s_log_block_size);
} else {
if (clustersize != sb->s_blocksize) {
ext4_msg(sb, KERN_ERR,
"fragment/cluster size (%d) != "
"block size (%lu)", clustersize, sb->s_blocksize);
return -EINVAL;
}
if (sbi->s_blocks_per_group > sb->s_blocksize * 8) {
ext4_msg(sb, KERN_ERR,
"#blocks per group too big: %lu",
sbi->s_blocks_per_group);
return -EINVAL;
}
sbi->s_cluster_bits = 0;
}
sbi->s_clusters_per_group = le32_to_cpu(es->s_clusters_per_group);
if (sbi->s_clusters_per_group > sb->s_blocksize * 8) {
ext4_msg(sb, KERN_ERR, "#clusters per group too big: %lu",
sbi->s_clusters_per_group);
return -EINVAL;
}
if (sbi->s_blocks_per_group !=
(sbi->s_clusters_per_group * (clustersize / sb->s_blocksize))) {
ext4_msg(sb, KERN_ERR,
"blocks per group (%lu) and clusters per group (%lu) inconsistent",
sbi->s_blocks_per_group, sbi->s_clusters_per_group);
return -EINVAL;
}
sbi->s_cluster_ratio = clustersize / sb->s_blocksize;
/* Do we have standard group size of clustersize * 8 blocks ? */
if (sbi->s_blocks_per_group == clustersize << 3)
set_opt2(sb, STD_GROUP_SIZE);
return 0;
}
static void ext4_fast_commit_init(struct super_block *sb)
{
struct ext4_sb_info *sbi = EXT4_SB(sb);
/* Initialize fast commit stuff */
atomic_set(&sbi->s_fc_subtid, 0);
INIT_LIST_HEAD(&sbi->s_fc_q[FC_Q_MAIN]);
INIT_LIST_HEAD(&sbi->s_fc_q[FC_Q_STAGING]);
INIT_LIST_HEAD(&sbi->s_fc_dentry_q[FC_Q_MAIN]);
INIT_LIST_HEAD(&sbi->s_fc_dentry_q[FC_Q_STAGING]);
sbi->s_fc_bytes = 0;
ext4_clear_mount_flag(sb, EXT4_MF_FC_INELIGIBLE);
sbi->s_fc_ineligible_tid = 0;
spin_lock_init(&sbi->s_fc_lock);
memset(&sbi->s_fc_stats, 0, sizeof(sbi->s_fc_stats));
sbi->s_fc_replay_state.fc_regions = NULL;
sbi->s_fc_replay_state.fc_regions_size = 0;
sbi->s_fc_replay_state.fc_regions_used = 0;
sbi->s_fc_replay_state.fc_regions_valid = 0;
sbi->s_fc_replay_state.fc_modified_inodes = NULL;
sbi->s_fc_replay_state.fc_modified_inodes_size = 0;
sbi->s_fc_replay_state.fc_modified_inodes_used = 0;
}
static int ext4_inode_info_init(struct super_block *sb,
struct ext4_super_block *es)
{
struct ext4_sb_info *sbi = EXT4_SB(sb);
if (le32_to_cpu(es->s_rev_level) == EXT4_GOOD_OLD_REV) {
sbi->s_inode_size = EXT4_GOOD_OLD_INODE_SIZE;
sbi->s_first_ino = EXT4_GOOD_OLD_FIRST_INO;
} else {
sbi->s_inode_size = le16_to_cpu(es->s_inode_size);
sbi->s_first_ino = le32_to_cpu(es->s_first_ino);
if (sbi->s_first_ino < EXT4_GOOD_OLD_FIRST_INO) {
ext4_msg(sb, KERN_ERR, "invalid first ino: %u",
sbi->s_first_ino);
return -EINVAL;
}
if ((sbi->s_inode_size < EXT4_GOOD_OLD_INODE_SIZE) ||
(!is_power_of_2(sbi->s_inode_size)) ||
(sbi->s_inode_size > sb->s_blocksize)) {
ext4_msg(sb, KERN_ERR,
"unsupported inode size: %d",
sbi->s_inode_size);
ext4_msg(sb, KERN_ERR, "blocksize: %lu", sb->s_blocksize);
return -EINVAL;
}
/*
* i_atime_extra is the last extra field available for
* [acm]times in struct ext4_inode. Checking for that
* field should suffice to ensure we have extra space
* for all three.
*/
if (sbi->s_inode_size >= offsetof(struct ext4_inode, i_atime_extra) +
sizeof(((struct ext4_inode *)0)->i_atime_extra)) {
sb->s_time_gran = 1;
sb->s_time_max = EXT4_EXTRA_TIMESTAMP_MAX;
} else {
sb->s_time_gran = NSEC_PER_SEC;
sb->s_time_max = EXT4_NON_EXTRA_TIMESTAMP_MAX;
}
sb->s_time_min = EXT4_TIMESTAMP_MIN;
}
if (sbi->s_inode_size > EXT4_GOOD_OLD_INODE_SIZE) {
sbi->s_want_extra_isize = sizeof(struct ext4_inode) -
EXT4_GOOD_OLD_INODE_SIZE;
if (ext4_has_feature_extra_isize(sb)) {
unsigned v, max = (sbi->s_inode_size -
EXT4_GOOD_OLD_INODE_SIZE);
v = le16_to_cpu(es->s_want_extra_isize);
if (v > max) {
ext4_msg(sb, KERN_ERR,
"bad s_want_extra_isize: %d", v);
return -EINVAL;
}
if (sbi->s_want_extra_isize < v)
sbi->s_want_extra_isize = v;
v = le16_to_cpu(es->s_min_extra_isize);
if (v > max) {
ext4_msg(sb, KERN_ERR,
"bad s_min_extra_isize: %d", v);
return -EINVAL;
}
if (sbi->s_want_extra_isize < v)
sbi->s_want_extra_isize = v;
}
}
return 0;
}
#if IS_ENABLED(CONFIG_UNICODE)
static int ext4_encoding_init(struct super_block *sb, struct ext4_super_block *es)
{
const struct ext4_sb_encodings *encoding_info;
struct unicode_map *encoding;
__u16 encoding_flags = le16_to_cpu(es->s_encoding_flags);
if (!ext4_has_feature_casefold(sb) || sb->s_encoding)
return 0;
encoding_info = ext4_sb_read_encoding(es);
if (!encoding_info) {
ext4_msg(sb, KERN_ERR,
"Encoding requested by superblock is unknown");
return -EINVAL;
}
encoding = utf8_load(encoding_info->version);
if (IS_ERR(encoding)) {
ext4_msg(sb, KERN_ERR,
"can't mount with superblock charset: %s-%u.%u.%u "
"not supported by the kernel. flags: 0x%x.",
encoding_info->name,
unicode_major(encoding_info->version),
unicode_minor(encoding_info->version),
unicode_rev(encoding_info->version),
encoding_flags);
return -EINVAL;
}
ext4_msg(sb, KERN_INFO,"Using encoding defined by superblock: "
"%s-%u.%u.%u with flags 0x%hx", encoding_info->name,
unicode_major(encoding_info->version),
unicode_minor(encoding_info->version),
unicode_rev(encoding_info->version),
encoding_flags);
sb->s_encoding = encoding;
sb->s_encoding_flags = encoding_flags;
return 0;
}
#else
static inline int ext4_encoding_init(struct super_block *sb, struct ext4_super_block *es)
{
return 0;
}
#endif
static int ext4_init_metadata_csum(struct super_block *sb, struct ext4_super_block *es)
{
struct ext4_sb_info *sbi = EXT4_SB(sb);
/* Warn if metadata_csum and gdt_csum are both set. */
if (ext4_has_feature_metadata_csum(sb) &&
ext4_has_feature_gdt_csum(sb))
ext4_warning(sb, "metadata_csum and uninit_bg are "
"redundant flags; please run fsck.");
/* Check for a known checksum algorithm */
if (!ext4_verify_csum_type(sb, es)) {
ext4_msg(sb, KERN_ERR, "VFS: Found ext4 filesystem with "
"unknown checksum algorithm.");
return -EINVAL;
}
ext4_setup_csum_trigger(sb, EXT4_JTR_ORPHAN_FILE,
ext4_orphan_file_block_trigger);
/* Load the checksum driver */
sbi->s_chksum_driver = crypto_alloc_shash("crc32c", 0, 0);
if (IS_ERR(sbi->s_chksum_driver)) {
int ret = PTR_ERR(sbi->s_chksum_driver);
ext4_msg(sb, KERN_ERR, "Cannot load crc32c driver.");
sbi->s_chksum_driver = NULL;
return ret;
}
/* Check superblock checksum */
if (!ext4_superblock_csum_verify(sb, es)) {
ext4_msg(sb, KERN_ERR, "VFS: Found ext4 filesystem with "
"invalid superblock checksum. Run e2fsck?");
return -EFSBADCRC;
}
/* Precompute checksum seed for all metadata */
if (ext4_has_feature_csum_seed(sb))
sbi->s_csum_seed = le32_to_cpu(es->s_checksum_seed);
else if (ext4_has_metadata_csum(sb) || ext4_has_feature_ea_inode(sb))
sbi->s_csum_seed = ext4_chksum(sbi, ~0, es->s_uuid,
sizeof(es->s_uuid));
return 0;
}
static int ext4_check_feature_compatibility(struct super_block *sb,
struct ext4_super_block *es,
int silent)
{
struct ext4_sb_info *sbi = EXT4_SB(sb);
if (le32_to_cpu(es->s_rev_level) == EXT4_GOOD_OLD_REV &&
(ext4_has_compat_features(sb) ||
ext4_has_ro_compat_features(sb) ||
ext4_has_incompat_features(sb)))
ext4_msg(sb, KERN_WARNING,
"feature flags set on rev 0 fs, "
"running e2fsck is recommended");
if (es->s_creator_os == cpu_to_le32(EXT4_OS_HURD)) {
set_opt2(sb, HURD_COMPAT);
if (ext4_has_feature_64bit(sb)) {
ext4_msg(sb, KERN_ERR,
"The Hurd can't support 64-bit file systems");
return -EINVAL;
}
/*
* ea_inode feature uses l_i_version field which is not
* available in HURD_COMPAT mode.
*/
if (ext4_has_feature_ea_inode(sb)) {
ext4_msg(sb, KERN_ERR,
"ea_inode feature is not supported for Hurd");
return -EINVAL;
}
}
if (IS_EXT2_SB(sb)) {
if (ext2_feature_set_ok(sb))
ext4_msg(sb, KERN_INFO, "mounting ext2 file system "
"using the ext4 subsystem");
else {
/*
* If we're probing be silent, if this looks like
* it's actually an ext[34] filesystem.
*/
if (silent && ext4_feature_set_ok(sb, sb_rdonly(sb)))
return -EINVAL;
ext4_msg(sb, KERN_ERR, "couldn't mount as ext2 due "
"to feature incompatibilities");
return -EINVAL;
}
}
if (IS_EXT3_SB(sb)) {
if (ext3_feature_set_ok(sb))
ext4_msg(sb, KERN_INFO, "mounting ext3 file system "
"using the ext4 subsystem");
else {
/*
* If we're probing be silent, if this looks like
* it's actually an ext4 filesystem.
*/
if (silent && ext4_feature_set_ok(sb, sb_rdonly(sb)))
return -EINVAL;
ext4_msg(sb, KERN_ERR, "couldn't mount as ext3 due "
"to feature incompatibilities");
return -EINVAL;
}
}
/*
* Check feature flags regardless of the revision level, since we
* previously didn't change the revision level when setting the flags,
* so there is a chance incompat flags are set on a rev 0 filesystem.
*/
if (!ext4_feature_set_ok(sb, (sb_rdonly(sb))))
return -EINVAL;
if (sbi->s_daxdev) {
if (sb->s_blocksize == PAGE_SIZE)
set_bit(EXT4_FLAGS_BDEV_IS_DAX, &sbi->s_ext4_flags);
else
ext4_msg(sb, KERN_ERR, "unsupported blocksize for DAX\n");
}
if (sbi->s_mount_opt & EXT4_MOUNT_DAX_ALWAYS) {
if (ext4_has_feature_inline_data(sb)) {
ext4_msg(sb, KERN_ERR, "Cannot use DAX on a filesystem"
" that may contain inline data");
return -EINVAL;
}
if (!test_bit(EXT4_FLAGS_BDEV_IS_DAX, &sbi->s_ext4_flags)) {
ext4_msg(sb, KERN_ERR,
"DAX unsupported by block device.");
return -EINVAL;
}
}
if (ext4_has_feature_encrypt(sb) && es->s_encryption_level) {
ext4_msg(sb, KERN_ERR, "Unsupported encryption level %d",
es->s_encryption_level);
return -EINVAL;
}
return 0;
}
static int ext4_check_geometry(struct super_block *sb,
struct ext4_super_block *es)
{
struct ext4_sb_info *sbi = EXT4_SB(sb);
__u64 blocks_count;
int err;
if (le16_to_cpu(sbi->s_es->s_reserved_gdt_blocks) > (sb->s_blocksize / 4)) {
ext4_msg(sb, KERN_ERR,
"Number of reserved GDT blocks insanely large: %d",
le16_to_cpu(sbi->s_es->s_reserved_gdt_blocks));
return -EINVAL;
}
/*
* Test whether we have more sectors than will fit in sector_t,
* and whether the max offset is addressable by the page cache.
*/
err = generic_check_addressable(sb->s_blocksize_bits,
ext4_blocks_count(es));
if (err) {
ext4_msg(sb, KERN_ERR, "filesystem"
" too large to mount safely on this system");
return err;
}
/* check blocks count against device size */
blocks_count = sb_bdev_nr_blocks(sb);
if (blocks_count && ext4_blocks_count(es) > blocks_count) {
ext4_msg(sb, KERN_WARNING, "bad geometry: block count %llu "
"exceeds size of device (%llu blocks)",
ext4_blocks_count(es), blocks_count);
return -EINVAL;
}
/*
* It makes no sense for the first data block to be beyond the end
* of the filesystem.
*/
if (le32_to_cpu(es->s_first_data_block) >= ext4_blocks_count(es)) {
ext4_msg(sb, KERN_WARNING, "bad geometry: first data "
"block %u is beyond end of filesystem (%llu)",
le32_to_cpu(es->s_first_data_block),
ext4_blocks_count(es));
return -EINVAL;
}
if ((es->s_first_data_block == 0) && (es->s_log_block_size == 0) &&
(sbi->s_cluster_ratio == 1)) {
ext4_msg(sb, KERN_WARNING, "bad geometry: first data "
"block is 0 with a 1k block and cluster size");
return -EINVAL;
}
blocks_count = (ext4_blocks_count(es) -
le32_to_cpu(es->s_first_data_block) +
EXT4_BLOCKS_PER_GROUP(sb) - 1);
do_div(blocks_count, EXT4_BLOCKS_PER_GROUP(sb));
if (blocks_count > ((uint64_t)1<<32) - EXT4_DESC_PER_BLOCK(sb)) {
ext4_msg(sb, KERN_WARNING, "groups count too large: %llu "
"(block count %llu, first data block %u, "
"blocks per group %lu)", blocks_count,
ext4_blocks_count(es),
le32_to_cpu(es->s_first_data_block),
EXT4_BLOCKS_PER_GROUP(sb));
return -EINVAL;
}
sbi->s_groups_count = blocks_count;
sbi->s_blockfile_groups = min_t(ext4_group_t, sbi->s_groups_count,
(EXT4_MAX_BLOCK_FILE_PHYS / EXT4_BLOCKS_PER_GROUP(sb)));
if (((u64)sbi->s_groups_count * sbi->s_inodes_per_group) !=
le32_to_cpu(es->s_inodes_count)) {
ext4_msg(sb, KERN_ERR, "inodes count not valid: %u vs %llu",
le32_to_cpu(es->s_inodes_count),
((u64)sbi->s_groups_count * sbi->s_inodes_per_group));
return -EINVAL;
}
return 0;
}
static int ext4_group_desc_init(struct super_block *sb,
struct ext4_super_block *es,
ext4_fsblk_t logical_sb_block,
ext4_group_t *first_not_zeroed)
{
struct ext4_sb_info *sbi = EXT4_SB(sb);
unsigned int db_count;
ext4_fsblk_t block;
int i;
db_count = (sbi->s_groups_count + EXT4_DESC_PER_BLOCK(sb) - 1) /
EXT4_DESC_PER_BLOCK(sb);
if (ext4_has_feature_meta_bg(sb)) {
if (le32_to_cpu(es->s_first_meta_bg) > db_count) {
ext4_msg(sb, KERN_WARNING,
"first meta block group too large: %u "
"(group descriptor block count %u)",
le32_to_cpu(es->s_first_meta_bg), db_count);
return -EINVAL;
}
}
rcu_assign_pointer(sbi->s_group_desc,
kvmalloc_array(db_count,
sizeof(struct buffer_head *),
GFP_KERNEL));
if (sbi->s_group_desc == NULL) {
ext4_msg(sb, KERN_ERR, "not enough memory");
return -ENOMEM;
}
bgl_lock_init(sbi->s_blockgroup_lock);
/* Pre-read the descriptors into the buffer cache */
for (i = 0; i < db_count; i++) {
block = descriptor_loc(sb, logical_sb_block, i);
ext4_sb_breadahead_unmovable(sb, block);
}
for (i = 0; i < db_count; i++) {
struct buffer_head *bh;
block = descriptor_loc(sb, logical_sb_block, i);
bh = ext4_sb_bread_unmovable(sb, block);
if (IS_ERR(bh)) {
ext4_msg(sb, KERN_ERR,
"can't read group descriptor %d", i);
sbi->s_gdb_count = i;
return PTR_ERR(bh);
}
rcu_read_lock();
rcu_dereference(sbi->s_group_desc)[i] = bh;
rcu_read_unlock();
}
sbi->s_gdb_count = db_count;
if (!ext4_check_descriptors(sb, logical_sb_block, first_not_zeroed)) {
ext4_msg(sb, KERN_ERR, "group descriptors corrupted!");
return -EFSCORRUPTED;
}
return 0;
}
static int ext4_load_and_init_journal(struct super_block *sb,
struct ext4_super_block *es,
struct ext4_fs_context *ctx)
{
struct ext4_sb_info *sbi = EXT4_SB(sb);
int err;
err = ext4_load_journal(sb, es, ctx->journal_devnum);
if (err)
return err;
if (ext4_has_feature_64bit(sb) &&
!jbd2_journal_set_features(EXT4_SB(sb)->s_journal, 0, 0,
JBD2_FEATURE_INCOMPAT_64BIT)) {
ext4_msg(sb, KERN_ERR, "Failed to set 64-bit journal feature");
goto out;
}
if (!set_journal_csum_feature_set(sb)) {
ext4_msg(sb, KERN_ERR, "Failed to set journal checksum "
"feature set");
goto out;
}
if (test_opt2(sb, JOURNAL_FAST_COMMIT) &&
!jbd2_journal_set_features(EXT4_SB(sb)->s_journal, 0, 0,
JBD2_FEATURE_INCOMPAT_FAST_COMMIT)) {
ext4_msg(sb, KERN_ERR,
"Failed to set fast commit journal feature");
goto out;
}
/* We have now updated the journal if required, so we can
* validate the data journaling mode. */
switch (test_opt(sb, DATA_FLAGS)) {
case 0:
/* No mode set, assume a default based on the journal
* capabilities: ORDERED_DATA if the journal can
* cope, else JOURNAL_DATA
*/
if (jbd2_journal_check_available_features
(sbi->s_journal, 0, 0, JBD2_FEATURE_INCOMPAT_REVOKE)) {
set_opt(sb, ORDERED_DATA);
sbi->s_def_mount_opt |= EXT4_MOUNT_ORDERED_DATA;
} else {
set_opt(sb, JOURNAL_DATA);
sbi->s_def_mount_opt |= EXT4_MOUNT_JOURNAL_DATA;
}
break;
case EXT4_MOUNT_ORDERED_DATA:
case EXT4_MOUNT_WRITEBACK_DATA:
if (!jbd2_journal_check_available_features
(sbi->s_journal, 0, 0, JBD2_FEATURE_INCOMPAT_REVOKE)) {
ext4_msg(sb, KERN_ERR, "Journal does not support "
"requested data journaling mode");
goto out;
}
break;
default:
break;
}
if (test_opt(sb, DATA_FLAGS) == EXT4_MOUNT_ORDERED_DATA &&
test_opt(sb, JOURNAL_ASYNC_COMMIT)) {
ext4_msg(sb, KERN_ERR, "can't mount with "
"journal_async_commit in data=ordered mode");
goto out;
}
set_task_ioprio(sbi->s_journal->j_task, ctx->journal_ioprio);
sbi->s_journal->j_submit_inode_data_buffers =
ext4_journal_submit_inode_data_buffers;
sbi->s_journal->j_finish_inode_data_buffers =
ext4_journal_finish_inode_data_buffers;
return 0;
out:
/* flush s_sb_upd_work before destroying the journal. */
flush_work(&sbi->s_sb_upd_work);
jbd2_journal_destroy(sbi->s_journal);
sbi->s_journal = NULL;
return -EINVAL;
}
static int ext4_check_journal_data_mode(struct super_block *sb)
{
if (test_opt(sb, DATA_FLAGS) == EXT4_MOUNT_JOURNAL_DATA) {
printk_once(KERN_WARNING "EXT4-fs: Warning: mounting with "
"data=journal disables delayed allocation, "
"dioread_nolock, O_DIRECT and fast_commit support!\n");
/* can't mount with both data=journal and dioread_nolock. */
clear_opt(sb, DIOREAD_NOLOCK);
clear_opt2(sb, JOURNAL_FAST_COMMIT);
if (test_opt2(sb, EXPLICIT_DELALLOC)) {
ext4_msg(sb, KERN_ERR, "can't mount with "
"both data=journal and delalloc");
return -EINVAL;
}
if (test_opt(sb, DAX_ALWAYS)) {
ext4_msg(sb, KERN_ERR, "can't mount with "
"both data=journal and dax");
return -EINVAL;
}
if (ext4_has_feature_encrypt(sb)) {
ext4_msg(sb, KERN_WARNING,
"encrypted files will use data=ordered "
"instead of data journaling mode");
}
if (test_opt(sb, DELALLOC))
clear_opt(sb, DELALLOC);
} else {
sb->s_iflags |= SB_I_CGROUPWB;
}
return 0;
}
static int ext4_load_super(struct super_block *sb, ext4_fsblk_t *lsb,
int silent)
{
ext4: Completely separate options parsing and sb setup The new mount api separates option parsing and super block setup into two distinct steps and so we need to separate the options parsing out of the ext4_fill_super() and ext4_remount(). In order to achieve this we have to create new ext4_fill_super() and ext4_remount() functions which will serve its purpose only until we actually do convert to the new api (as such they are only temporary for this patch series) and move the option parsing out of the old function which will now be renamed to __ext4_fill_super() and __ext4_remount(). There is a small complication in the fact that while the mount option parsing is going to happen before we get to __ext4_fill_super(), the mount options stored in the super block itself needs to be applied first, before the user specified mount options. So with this patch we're going through the following sequence: - parse user provided options (including sb block) - initialize sbi and store s_sb_block if provided - in __ext4_fill_super() - read the super block - parse and apply options specified in s_mount_opts - check and apply user provided options stored in ctx - continue with the regular ext4_fill_super operation It's not exactly the most elegant solution, but if we still want to support s_mount_opts we have to do it in this order. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Link: https://lore.kernel.org/r/20211027141857.33657-10-lczerner@redhat.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2021-10-27 14:18:53 +00:00
struct ext4_sb_info *sbi = EXT4_SB(sb);
struct ext4_super_block *es;
ext4_fsblk_t logical_sb_block;
unsigned long offset = 0;
struct buffer_head *bh;
int ret = -EINVAL;
int blocksize;
blocksize = sb_min_blocksize(sb, EXT4_MIN_BLOCK_SIZE);
if (!blocksize) {
ext4_msg(sb, KERN_ERR, "unable to set blocksize");
return -EINVAL;
}
/*
* The ext4 superblock will not be buffer aligned for other than 1kB
* block sizes. We need to calculate the offset from buffer start.
*/
if (blocksize != EXT4_MIN_BLOCK_SIZE) {
ext4: Completely separate options parsing and sb setup The new mount api separates option parsing and super block setup into two distinct steps and so we need to separate the options parsing out of the ext4_fill_super() and ext4_remount(). In order to achieve this we have to create new ext4_fill_super() and ext4_remount() functions which will serve its purpose only until we actually do convert to the new api (as such they are only temporary for this patch series) and move the option parsing out of the old function which will now be renamed to __ext4_fill_super() and __ext4_remount(). There is a small complication in the fact that while the mount option parsing is going to happen before we get to __ext4_fill_super(), the mount options stored in the super block itself needs to be applied first, before the user specified mount options. So with this patch we're going through the following sequence: - parse user provided options (including sb block) - initialize sbi and store s_sb_block if provided - in __ext4_fill_super() - read the super block - parse and apply options specified in s_mount_opts - check and apply user provided options stored in ctx - continue with the regular ext4_fill_super operation It's not exactly the most elegant solution, but if we still want to support s_mount_opts we have to do it in this order. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Link: https://lore.kernel.org/r/20211027141857.33657-10-lczerner@redhat.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2021-10-27 14:18:53 +00:00
logical_sb_block = sbi->s_sb_block * EXT4_MIN_BLOCK_SIZE;
offset = do_div(logical_sb_block, blocksize);
} else {
ext4: Completely separate options parsing and sb setup The new mount api separates option parsing and super block setup into two distinct steps and so we need to separate the options parsing out of the ext4_fill_super() and ext4_remount(). In order to achieve this we have to create new ext4_fill_super() and ext4_remount() functions which will serve its purpose only until we actually do convert to the new api (as such they are only temporary for this patch series) and move the option parsing out of the old function which will now be renamed to __ext4_fill_super() and __ext4_remount(). There is a small complication in the fact that while the mount option parsing is going to happen before we get to __ext4_fill_super(), the mount options stored in the super block itself needs to be applied first, before the user specified mount options. So with this patch we're going through the following sequence: - parse user provided options (including sb block) - initialize sbi and store s_sb_block if provided - in __ext4_fill_super() - read the super block - parse and apply options specified in s_mount_opts - check and apply user provided options stored in ctx - continue with the regular ext4_fill_super operation It's not exactly the most elegant solution, but if we still want to support s_mount_opts we have to do it in this order. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Link: https://lore.kernel.org/r/20211027141857.33657-10-lczerner@redhat.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2021-10-27 14:18:53 +00:00
logical_sb_block = sbi->s_sb_block;
}
bh = ext4_sb_bread_unmovable(sb, logical_sb_block);
if (IS_ERR(bh)) {
ext4_msg(sb, KERN_ERR, "unable to read superblock");
return PTR_ERR(bh);
}
/*
* Note: s_es must be initialized as soon as possible because
* some ext4 macro-instructions depend on its value
*/
es = (struct ext4_super_block *) (bh->b_data + offset);
sbi->s_es = es;
sb->s_magic = le16_to_cpu(es->s_magic);
if (sb->s_magic != EXT4_SUPER_MAGIC) {
if (!silent)
ext4_msg(sb, KERN_ERR, "VFS: Can't find ext4 filesystem");
goto out;
}
if (le32_to_cpu(es->s_log_block_size) >
(EXT4_MAX_BLOCK_LOG_SIZE - EXT4_MIN_BLOCK_LOG_SIZE)) {
ext4_msg(sb, KERN_ERR,
"Invalid log block size: %u",
le32_to_cpu(es->s_log_block_size));
goto out;
}
if (le32_to_cpu(es->s_log_cluster_size) >
(EXT4_MAX_CLUSTER_LOG_SIZE - EXT4_MIN_BLOCK_LOG_SIZE)) {
ext4_msg(sb, KERN_ERR,
"Invalid log cluster size: %u",
le32_to_cpu(es->s_log_cluster_size));
goto out;
}
blocksize = EXT4_MIN_BLOCK_SIZE << le32_to_cpu(es->s_log_block_size);
/*
* If the default block size is not the same as the real block size,
* we need to reload it.
*/
if (sb->s_blocksize == blocksize) {
*lsb = logical_sb_block;
sbi->s_sbh = bh;
return 0;
}
/*
* bh must be released before kill_bdev(), otherwise
* it won't be freed and its page also. kill_bdev()
* is called by sb_set_blocksize().
*/
brelse(bh);
/* Validate the filesystem blocksize */
if (!sb_set_blocksize(sb, blocksize)) {
ext4_msg(sb, KERN_ERR, "bad block size %d",
blocksize);
bh = NULL;
goto out;
}
logical_sb_block = sbi->s_sb_block * EXT4_MIN_BLOCK_SIZE;
offset = do_div(logical_sb_block, blocksize);
bh = ext4_sb_bread_unmovable(sb, logical_sb_block);
if (IS_ERR(bh)) {
ext4_msg(sb, KERN_ERR, "Can't read superblock on 2nd try");
ret = PTR_ERR(bh);
bh = NULL;
goto out;
}
es = (struct ext4_super_block *)(bh->b_data + offset);
sbi->s_es = es;
if (es->s_magic != cpu_to_le16(EXT4_SUPER_MAGIC)) {
ext4_msg(sb, KERN_ERR, "Magic mismatch, very weird!");
goto out;
}
*lsb = logical_sb_block;
sbi->s_sbh = bh;
return 0;
out:
brelse(bh);
return ret;
}
static void ext4_hash_info_init(struct super_block *sb)
{
struct ext4_sb_info *sbi = EXT4_SB(sb);
struct ext4_super_block *es = sbi->s_es;
unsigned int i;
for (i = 0; i < 4; i++)
sbi->s_hash_seed[i] = le32_to_cpu(es->s_hash_seed[i]);
sbi->s_def_hash_version = es->s_def_hash_version;
if (ext4_has_feature_dir_index(sb)) {
i = le32_to_cpu(es->s_flags);
if (i & EXT2_FLAGS_UNSIGNED_HASH)
sbi->s_hash_unsigned = 3;
else if ((i & EXT2_FLAGS_SIGNED_HASH) == 0) {
#ifdef __CHAR_UNSIGNED__
if (!sb_rdonly(sb))
es->s_flags |=
cpu_to_le32(EXT2_FLAGS_UNSIGNED_HASH);
sbi->s_hash_unsigned = 3;
#else
if (!sb_rdonly(sb))
es->s_flags |=
cpu_to_le32(EXT2_FLAGS_SIGNED_HASH);
#endif
}
}
}
static int ext4_block_group_meta_init(struct super_block *sb, int silent)
{
struct ext4_sb_info *sbi = EXT4_SB(sb);
struct ext4_super_block *es = sbi->s_es;
int has_huge_files;
has_huge_files = ext4_has_feature_huge_file(sb);
sbi->s_bitmap_maxbytes = ext4_max_bitmap_size(sb->s_blocksize_bits,
has_huge_files);
sb->s_maxbytes = ext4_max_size(sb->s_blocksize_bits, has_huge_files);
sbi->s_desc_size = le16_to_cpu(es->s_desc_size);
if (ext4_has_feature_64bit(sb)) {
if (sbi->s_desc_size < EXT4_MIN_DESC_SIZE_64BIT ||
sbi->s_desc_size > EXT4_MAX_DESC_SIZE ||
!is_power_of_2(sbi->s_desc_size)) {
ext4_msg(sb, KERN_ERR,
"unsupported descriptor size %lu",
sbi->s_desc_size);
return -EINVAL;
}
} else
sbi->s_desc_size = EXT4_MIN_DESC_SIZE;
sbi->s_blocks_per_group = le32_to_cpu(es->s_blocks_per_group);
sbi->s_inodes_per_group = le32_to_cpu(es->s_inodes_per_group);
sbi->s_inodes_per_block = sb->s_blocksize / EXT4_INODE_SIZE(sb);
if (sbi->s_inodes_per_block == 0 || sbi->s_blocks_per_group == 0) {
if (!silent)
ext4_msg(sb, KERN_ERR, "VFS: Can't find ext4 filesystem");
return -EINVAL;
}
if (sbi->s_inodes_per_group < sbi->s_inodes_per_block ||
sbi->s_inodes_per_group > sb->s_blocksize * 8) {
ext4_msg(sb, KERN_ERR, "invalid inodes per group: %lu\n",
sbi->s_inodes_per_group);
return -EINVAL;
}
sbi->s_itb_per_group = sbi->s_inodes_per_group /
sbi->s_inodes_per_block;
sbi->s_desc_per_block = sb->s_blocksize / EXT4_DESC_SIZE(sb);
sbi->s_mount_state = le16_to_cpu(es->s_state) & ~EXT4_FC_REPLAY;
sbi->s_addr_per_block_bits = ilog2(EXT4_ADDR_PER_BLOCK(sb));
sbi->s_desc_per_block_bits = ilog2(EXT4_DESC_PER_BLOCK(sb));
return 0;
}
static int __ext4_fill_super(struct fs_context *fc, struct super_block *sb)
{
struct ext4_super_block *es = NULL;
struct ext4_sb_info *sbi = EXT4_SB(sb);
ext4_fsblk_t logical_sb_block;
struct inode *root;
int needs_recovery;
int err;
ext4_group_t first_not_zeroed;
struct ext4_fs_context *ctx = fc->fs_private;
int silent = fc->sb_flags & SB_SILENT;
/* Set defaults for the variables that will be set during parsing */
if (!(ctx->spec & EXT4_SPEC_JOURNAL_IOPRIO))
ctx->journal_ioprio = DEFAULT_JOURNAL_IOPRIO;
sbi->s_inode_readahead_blks = EXT4_DEF_INODE_READAHEAD_BLKS;
sbi->s_sectors_written_start =
part_stat_read(sb->s_bdev, sectors[STAT_WRITE]);
err = ext4_load_super(sb, &logical_sb_block, silent);
if (err)
goto out_fail;
es = sbi->s_es;
sbi->s_kbytes_written = le64_to_cpu(es->s_kbytes_written);
err = ext4_init_metadata_csum(sb, es);
if (err)
goto failed_mount;
ext4_set_def_opts(sb, es);
sbi->s_resuid = make_kuid(&init_user_ns, le16_to_cpu(es->s_def_resuid));
sbi->s_resgid = make_kgid(&init_user_ns, le16_to_cpu(es->s_def_resgid));
sbi->s_commit_interval = JBD2_DEFAULT_MAX_COMMIT_AGE * HZ;
sbi->s_min_batch_time = EXT4_DEF_MIN_BATCH_TIME;
sbi->s_max_batch_time = EXT4_DEF_MAX_BATCH_TIME;
/*
* set default s_li_wait_mult for lazyinit, for the case there is
* no mount option specified.
*/
sbi->s_li_wait_mult = EXT4_DEF_LI_WAIT_MULT;
err = ext4_inode_info_init(sb, es);
if (err)
goto failed_mount;
ext4: Completely separate options parsing and sb setup The new mount api separates option parsing and super block setup into two distinct steps and so we need to separate the options parsing out of the ext4_fill_super() and ext4_remount(). In order to achieve this we have to create new ext4_fill_super() and ext4_remount() functions which will serve its purpose only until we actually do convert to the new api (as such they are only temporary for this patch series) and move the option parsing out of the old function which will now be renamed to __ext4_fill_super() and __ext4_remount(). There is a small complication in the fact that while the mount option parsing is going to happen before we get to __ext4_fill_super(), the mount options stored in the super block itself needs to be applied first, before the user specified mount options. So with this patch we're going through the following sequence: - parse user provided options (including sb block) - initialize sbi and store s_sb_block if provided - in __ext4_fill_super() - read the super block - parse and apply options specified in s_mount_opts - check and apply user provided options stored in ctx - continue with the regular ext4_fill_super operation It's not exactly the most elegant solution, but if we still want to support s_mount_opts we have to do it in this order. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Link: https://lore.kernel.org/r/20211027141857.33657-10-lczerner@redhat.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2021-10-27 14:18:53 +00:00
err = parse_apply_sb_mount_options(sb, ctx);
if (err < 0)
goto failed_mount;
sbi->s_def_mount_opt = sbi->s_mount_opt;
sbi->s_def_mount_opt2 = sbi->s_mount_opt2;
ext4: Completely separate options parsing and sb setup The new mount api separates option parsing and super block setup into two distinct steps and so we need to separate the options parsing out of the ext4_fill_super() and ext4_remount(). In order to achieve this we have to create new ext4_fill_super() and ext4_remount() functions which will serve its purpose only until we actually do convert to the new api (as such they are only temporary for this patch series) and move the option parsing out of the old function which will now be renamed to __ext4_fill_super() and __ext4_remount(). There is a small complication in the fact that while the mount option parsing is going to happen before we get to __ext4_fill_super(), the mount options stored in the super block itself needs to be applied first, before the user specified mount options. So with this patch we're going through the following sequence: - parse user provided options (including sb block) - initialize sbi and store s_sb_block if provided - in __ext4_fill_super() - read the super block - parse and apply options specified in s_mount_opts - check and apply user provided options stored in ctx - continue with the regular ext4_fill_super operation It's not exactly the most elegant solution, but if we still want to support s_mount_opts we have to do it in this order. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Link: https://lore.kernel.org/r/20211027141857.33657-10-lczerner@redhat.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2021-10-27 14:18:53 +00:00
err = ext4_check_opt_consistency(fc, sb);
if (err < 0)
goto failed_mount;
ext4_apply_options(fc, sb);
err = ext4_encoding_init(sb, es);
if (err)
goto failed_mount;
err = ext4_check_journal_data_mode(sb);
if (err)
goto failed_mount;
Rename superblock flags (MS_xyz -> SB_xyz) This is a pure automated search-and-replace of the internal kernel superblock flags. The s_flags are now called SB_*, with the names and the values for the moment mirroring the MS_* flags that they're equivalent to. Note how the MS_xyz flags are the ones passed to the mount system call, while the SB_xyz flags are what we then use in sb->s_flags. The script to do this was: # places to look in; re security/*: it generally should *not* be # touched (that stuff parses mount(2) arguments directly), but # there are two places where we really deal with superblock flags. FILES="drivers/mtd drivers/staging/lustre fs ipc mm \ include/linux/fs.h include/uapi/linux/bfs_fs.h \ security/apparmor/apparmorfs.c security/apparmor/include/lib.h" # the list of MS_... constants SYMS="RDONLY NOSUID NODEV NOEXEC SYNCHRONOUS REMOUNT MANDLOCK \ DIRSYNC NOATIME NODIRATIME BIND MOVE REC VERBOSE SILENT \ POSIXACL UNBINDABLE PRIVATE SLAVE SHARED RELATIME KERNMOUNT \ I_VERSION STRICTATIME LAZYTIME SUBMOUNT NOREMOTELOCK NOSEC BORN \ ACTIVE NOUSER" SED_PROG= for i in $SYMS; do SED_PROG="$SED_PROG -e s/MS_$i/SB_$i/g"; done # we want files that contain at least one of MS_..., # with fs/namespace.c and fs/pnode.c excluded. L=$(for i in $SYMS; do git grep -w -l MS_$i $FILES; done| sort|uniq|grep -v '^fs/namespace.c'|grep -v '^fs/pnode.c') for f in $L; do sed -i $f $SED_PROG; done Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-27 21:05:09 +00:00
sb->s_flags = (sb->s_flags & ~SB_POSIXACL) |
(test_opt(sb, POSIX_ACL) ? SB_POSIXACL : 0);
/* i_version is always enabled now */
sb->s_flags |= SB_I_VERSION;
err = ext4_check_feature_compatibility(sb, es, silent);
if (err)
goto failed_mount;
err = ext4_block_group_meta_init(sb, silent);
if (err)
goto failed_mount;
ext4_hash_info_init(sb);
err = ext4_handle_clustersize(sb);
if (err)
goto failed_mount;
ext4: fix ext4_get_group_number() The function ext4_get_group_number() was introduced as an optimization in commit bd86298e60b8. Unfortunately, this commit incorrectly calculate the group number for file systems with a 1k block size (when s_first_data_block is 1 instead of zero). This could cause the following kernel BUG: [ 568.877799] ------------[ cut here ]------------ [ 568.877833] kernel BUG at fs/ext4/mballoc.c:3728! [ 568.877840] Oops: Exception in kernel mode, sig: 5 [#1] [ 568.877845] SMP NR_CPUS=32 NUMA pSeries [ 568.877852] Modules linked in: binfmt_misc [ 568.877861] CPU: 1 PID: 3516 Comm: fs_mark Not tainted 3.10.0-03216-g7c6809f-dirty #1 [ 568.877867] task: c0000001fb0b8000 ti: c0000001fa954000 task.ti: c0000001fa954000 [ 568.877873] NIP: c0000000002f42a4 LR: c0000000002f4274 CTR: c000000000317ef8 [ 568.877879] REGS: c0000001fa956ed0 TRAP: 0700 Not tainted (3.10.0-03216-g7c6809f-dirty) [ 568.877884] MSR: 8000000000029032 <SF,EE,ME,IR,DR,RI> CR: 24000428 XER: 00000000 [ 568.877902] SOFTE: 1 [ 568.877905] CFAR: c0000000002b5464 [ 568.877908] GPR00: 0000000000000001 c0000001fa957150 c000000000c6a408 c0000001fb588000 GPR04: 0000000000003fff c0000001fa9571c0 c0000001fa9571c4 000138098c50625f GPR08: 1301200000000000 0000000000000002 0000000000000001 0000000000000000 GPR12: 0000000024000422 c00000000f33a300 0000000000008000 c0000001fa9577f0 GPR16: c0000001fb7d0100 c000000000c29190 c0000000007f46e8 c000000000a14672 GPR20: 0000000000000001 0000000000000008 ffffffffffffffff 0000000000000000 GPR24: 0000000000000100 c0000001fa957278 c0000001fdb2bc78 c0000001fa957288 GPR28: 0000000000100100 c0000001fa957288 c0000001fb588000 c0000001fdb2bd10 [ 568.877993] NIP [c0000000002f42a4] .ext4_mb_release_group_pa+0xec/0x1c0 [ 568.877999] LR [c0000000002f4274] .ext4_mb_release_group_pa+0xbc/0x1c0 [ 568.878004] Call Trace: [ 568.878008] [c0000001fa957150] [c0000000002f4274] .ext4_mb_release_group_pa+0xbc/0x1c0 (unreliable) [ 568.878017] [c0000001fa957200] [c0000000002fb070] .ext4_mb_discard_lg_preallocations+0x394/0x444 [ 568.878025] [c0000001fa957340] [c0000000002fb45c] .ext4_mb_release_context+0x33c/0x734 [ 568.878032] [c0000001fa957440] [c0000000002fbcf8] .ext4_mb_new_blocks+0x4a4/0x5f4 [ 568.878039] [c0000001fa957510] [c0000000002ef56c] .ext4_ext_map_blocks+0xc28/0x1178 [ 568.878047] [c0000001fa957640] [c0000000002c1a94] .ext4_map_blocks+0x2c8/0x490 [ 568.878054] [c0000001fa957730] [c0000000002c536c] .ext4_writepages+0x738/0xc60 [ 568.878062] [c0000001fa957950] [c000000000168a78] .do_writepages+0x5c/0x80 [ 568.878069] [c0000001fa9579d0] [c00000000015d1c4] .__filemap_fdatawrite_range+0x88/0xb0 [ 568.878078] [c0000001fa957aa0] [c00000000015d23c] .filemap_write_and_wait_range+0x50/0xfc [ 568.878085] [c0000001fa957b30] [c0000000002b8edc] .ext4_sync_file+0x220/0x3c4 [ 568.878092] [c0000001fa957be0] [c0000000001f849c] .vfs_fsync_range+0x64/0x80 [ 568.878098] [c0000001fa957c70] [c0000000001f84f0] .vfs_fsync+0x38/0x4c [ 568.878105] [c0000001fa957d00] [c0000000001f87f4] .do_fsync+0x54/0x90 [ 568.878111] [c0000001fa957db0] [c0000000001f8894] .SyS_fsync+0x28/0x3c [ 568.878120] [c0000001fa957e30] [c000000000009c88] syscall_exit+0x0/0x7c [ 568.878125] Instruction dump: [ 568.878130] 60000000 813d0034 81610070 38000000 7f8b4800 419e001c 813f007c 7d2bfe70 [ 568.878144] 7d604a78 7c005850 54000ffe 7c0007b4 <0b000000> e8a10076 e87f0090 7fa4eb78 [ 568.878160] ---[ end trace 594d911d9654770b ]--- In addition fix the STD_GROUP optimization so that it works for bigalloc file systems as well. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Reported-by: Li Zhong <lizhongfs@gmail.com> Reviewed-by: Lukas Czerner <lczerner@redhat.com> Cc: stable@vger.kernel.org # 3.10
2013-07-06 03:11:16 +00:00
err = ext4_check_geometry(sb, es);
if (err)
goto failed_mount;
timer_setup(&sbi->s_err_report, print_daily_error_info, 0);
spin_lock_init(&sbi->s_error_lock);
INIT_WORK(&sbi->s_sb_upd_work, update_super_work);
err = ext4_group_desc_init(sb, es, logical_sb_block, &first_not_zeroed);
if (err)
goto failed_mount3;
err = ext4_es_register_shrinker(sbi);
if (err)
goto failed_mount3;
sbi->s_stripe = ext4_get_stripe_size(sbi);
/*
* It's hard to get stripe aligned blocks if stripe is not aligned with
* cluster, just disable stripe and alert user to simpfy code and avoid
* stripe aligned allocation which will rarely successes.
*/
if (sbi->s_stripe > 0 && sbi->s_cluster_ratio > 1 &&
sbi->s_stripe % sbi->s_cluster_ratio != 0) {
ext4_msg(sb, KERN_WARNING,
"stripe (%lu) is not aligned with cluster size (%u), "
"stripe is disabled",
sbi->s_stripe, sbi->s_cluster_ratio);
sbi->s_stripe = 0;
}
sbi->s_extent_max_zeroout_kb = 32;
/*
* set up enough so that it can read an inode
*/
sb->s_op = &ext4_sops;
sb->s_export_op = &ext4_export_ops;
sb->s_xattr = ext4_xattr_handlers;
#ifdef CONFIG_FS_ENCRYPTION
sb->s_cop = &ext4_cryptops;
#endif
ext4: add basic fs-verity support Add most of fs-verity support to ext4. fs-verity is a filesystem feature that enables transparent integrity protection and authentication of read-only files. It uses a dm-verity like mechanism at the file level: a Merkle tree is used to verify any block in the file in log(filesize) time. It is implemented mainly by helper functions in fs/verity/. See Documentation/filesystems/fsverity.rst for the full documentation. This commit adds all of ext4 fs-verity support except for the actual data verification, including: - Adding a filesystem feature flag and an inode flag for fs-verity. - Implementing the fsverity_operations to support enabling verity on an inode and reading/writing the verity metadata. - Updating ->write_begin(), ->write_end(), and ->writepages() to support writing verity metadata pages. - Calling the fs-verity hooks for ->open(), ->setattr(), and ->ioctl(). ext4 stores the verity metadata (Merkle tree and fsverity_descriptor) past the end of the file, starting at the first 64K boundary beyond i_size. This approach works because (a) verity files are readonly, and (b) pages fully beyond i_size aren't visible to userspace but can be read/written internally by ext4 with only some relatively small changes to ext4. This approach avoids having to depend on the EA_INODE feature and on rearchitecturing ext4's xattr support to support paging multi-gigabyte xattrs into memory, and to support encrypting xattrs. Note that the verity metadata *must* be encrypted when the file is, since it contains hashes of the plaintext data. This patch incorporates work by Theodore Ts'o and Chandan Rajendra. Reviewed-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-07-22 16:26:24 +00:00
#ifdef CONFIG_FS_VERITY
sb->s_vop = &ext4_verityops;
#endif
#ifdef CONFIG_QUOTA
sb->dq_op = &ext4_quota_operations;
if (ext4_has_feature_quota(sb))
sb->s_qcop = &dquot_quotactl_sysfile_ops;
else
sb->s_qcop = &ext4_qctl_operations;
sb->s_quota_types = QTYPE_MASK_USR | QTYPE_MASK_GRP | QTYPE_MASK_PRJ;
#endif
super_set_uuid(sb, es->s_uuid, sizeof(es->s_uuid));
super_set_sysfs_name_bdev(sb);
INIT_LIST_HEAD(&sbi->s_orphan); /* unlinked but open files */
mutex_init(&sbi->s_orphan_lock);
ext4_fast_commit_init(sb);
sb->s_root = NULL;
needs_recovery = (es->s_last_orphan != 0 ||
ext4: Speedup ext4 orphan inode handling Ext4 orphan inode handling is a bottleneck for workloads which heavily truncate / unlink small files since it contends on the global s_orphan_mutex lock (and generally it's difficult to improve scalability of the ondisk linked list of orphaned inodes). This patch implements new way of handling orphan inodes. Instead of linking orphaned inode into a linked list, we store it's inode number in a new special file which we call "orphan file". Only if there's no more space in the orphan file (too many inodes are currently orphaned) we fall back to using old style linked list. Currently we protect operations in the orphan file with a spinlock for simplicity but even in this setting we can substantially reduce the length of the critical section and thus speedup some workloads. In the next patch we improve this by making orphan handling lockless. Note that the change is backwards compatible when the filesystem is clean - the existence of the orphan file is a compat feature, we set another ro-compat feature indicating orphan file needs scanning for orphaned inodes when mounting filesystem read-write. This ro-compat feature gets cleared on unmount / remount read-only. Some performance data from 80 CPU Xeon Server with 512 GB of RAM, filesystem located on SSD, average of 5 runs: stress-orphan (microbenchmark truncating files byte-by-byte from N processes in parallel) Threads Time Time Vanilla Patched 1 1.057200 0.945600 2 1.680400 1.331800 4 2.547000 1.995000 8 7.049400 6.424200 16 14.827800 14.937600 32 40.948200 33.038200 64 87.787400 60.823600 128 206.504000 122.941400 So we can see significant wins all over the board. Reviewed-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20210816095713.16537-3-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2021-08-16 09:57:06 +00:00
ext4_has_feature_orphan_present(sb) ||
ext4_has_feature_journal_needs_recovery(sb));
if (ext4_has_feature_mmp(sb) && !sb_rdonly(sb)) {
err = ext4_multi_mount_protect(sb, le64_to_cpu(es->s_mmp_block));
if (err)
goto failed_mount3a;
}
err = -EINVAL;
/*
* The first inode we look at is the journal inode. Don't try
* root first: it may be modified in the journal!
*/
if (!test_opt(sb, NOLOAD) && ext4_has_feature_journal(sb)) {
err = ext4_load_and_init_journal(sb, es, ctx);
if (err)
goto failed_mount3a;
} else if (test_opt(sb, NOLOAD) && !sb_rdonly(sb) &&
ext4_has_feature_journal_needs_recovery(sb)) {
ext4_msg(sb, KERN_ERR, "required journal recovery "
"suppressed and not mounted read-only");
goto failed_mount3a;
} else {
/* Nojournal mode, all journal mount options are illegal */
if (test_opt(sb, JOURNAL_ASYNC_COMMIT)) {
ext4_msg(sb, KERN_ERR, "can't mount with "
"journal_async_commit, fs mounted w/o journal");
goto failed_mount3a;
}
if (test_opt2(sb, EXPLICIT_JOURNAL_CHECKSUM)) {
ext4_msg(sb, KERN_ERR, "can't mount with "
"journal_checksum, fs mounted w/o journal");
goto failed_mount3a;
}
if (sbi->s_commit_interval != JBD2_DEFAULT_MAX_COMMIT_AGE*HZ) {
ext4_msg(sb, KERN_ERR, "can't mount with "
"commit=%lu, fs mounted w/o journal",
sbi->s_commit_interval / HZ);
goto failed_mount3a;
}
if (EXT4_MOUNT_DATA_FLAGS &
(sbi->s_mount_opt ^ sbi->s_def_mount_opt)) {
ext4_msg(sb, KERN_ERR, "can't mount with "
"data=, fs mounted w/o journal");
goto failed_mount3a;
}
sbi->s_def_mount_opt &= ~EXT4_MOUNT_JOURNAL_CHECKSUM;
clear_opt(sb, JOURNAL_CHECKSUM);
clear_opt(sb, DATA_FLAGS);
clear_opt2(sb, JOURNAL_FAST_COMMIT);
sbi->s_journal = NULL;
needs_recovery = 0;
}
if (!test_opt(sb, NO_MBCACHE)) {
sbi->s_ea_block_cache = ext4_xattr_create_cache();
if (!sbi->s_ea_block_cache) {
ext4_msg(sb, KERN_ERR,
"Failed to create ea_block_cache");
err = -EINVAL;
goto failed_mount_wq;
}
if (ext4_has_feature_ea_inode(sb)) {
sbi->s_ea_inode_cache = ext4_xattr_create_cache();
if (!sbi->s_ea_inode_cache) {
ext4_msg(sb, KERN_ERR,
"Failed to create ea_inode_cache");
err = -EINVAL;
goto failed_mount_wq;
}
}
}
/*
* Get the # of file system overhead blocks from the
* superblock if present.
*/
sbi->s_overhead = le32_to_cpu(es->s_overhead_clusters);
/* ignore the precalculated value if it is ridiculous */
if (sbi->s_overhead > ext4_blocks_count(es))
sbi->s_overhead = 0;
/*
* If the bigalloc feature is not enabled recalculating the
* overhead doesn't take long, so we might as well just redo
* it to make sure we are using the correct value.
*/
if (!ext4_has_feature_bigalloc(sb))
sbi->s_overhead = 0;
if (sbi->s_overhead == 0) {
err = ext4_calculate_overhead(sb);
if (err)
goto failed_mount_wq;
}
/*
* The maximum number of concurrent works can be high and
* concurrency isn't really necessary. Limit it to 1.
*/
EXT4_SB(sb)->rsv_conversion_wq =
alloc_workqueue("ext4-rsv-conversion", WQ_MEM_RECLAIM | WQ_UNBOUND, 1);
if (!EXT4_SB(sb)->rsv_conversion_wq) {
printk(KERN_ERR "EXT4-fs: failed to create workqueue\n");
err = -ENOMEM;
goto failed_mount4;
}
/*
* The jbd2_journal_load will have done any necessary log recovery,
* so we can safely mount the rest of the filesystem now.
*/
root = ext4_iget(sb, EXT4_ROOT_INO, EXT4_IGET_SPECIAL);
if (IS_ERR(root)) {
ext4_msg(sb, KERN_ERR, "get root inode failed");
err = PTR_ERR(root);
root = NULL;
goto failed_mount4;
}
if (!S_ISDIR(root->i_mode) || !root->i_blocks || !root->i_size) {
ext4_msg(sb, KERN_ERR, "corrupt root inode, run e2fsck");
iput(root);
err = -EFSCORRUPTED;
goto failed_mount4;
}
ext4: Support case-insensitive file name lookups This patch implements the actual support for case-insensitive file name lookups in ext4, based on the feature bit and the encoding stored in the superblock. A filesystem that has the casefold feature set is able to configure directories with the +F (EXT4_CASEFOLD_FL) attribute, enabling lookups to succeed in that directory in a case-insensitive fashion, i.e: match a directory entry even if the name used by userspace is not a byte per byte match with the disk name, but is an equivalent case-insensitive version of the Unicode string. This operation is called a case-insensitive file name lookup. The feature is configured as an inode attribute applied to directories and inherited by its children. This attribute can only be enabled on empty directories for filesystems that support the encoding feature, thus preventing collision of file names that only differ by case. * dcache handling: For a +F directory, Ext4 only stores the first equivalent name dentry used in the dcache. This is done to prevent unintentional duplication of dentries in the dcache, while also allowing the VFS code to quickly find the right entry in the cache despite which equivalent string was used in a previous lookup, without having to resort to ->lookup(). d_hash() of casefolded directories is implemented as the hash of the casefolded string, such that we always have a well-known bucket for all the equivalencies of the same string. d_compare() uses the utf8_strncasecmp() infrastructure, which handles the comparison of equivalent, same case, names as well. For now, negative lookups are not inserted in the dcache, since they would need to be invalidated anyway, because we can't trust missing file dentries. This is bad for performance but requires some leveraging of the vfs layer to fix. We can live without that for now, and so does everyone else. * on-disk data: Despite using a specific version of the name as the internal representation within the dcache, the name stored and fetched from the disk is a byte-per-byte match with what the user requested, making this implementation 'name-preserving'. i.e. no actual information is lost when writing to storage. DX is supported by modifying the hashes used in +F directories to make them case/encoding-aware. The new disk hashes are calculated as the hash of the full casefolded string, instead of the string directly. This allows us to efficiently search for file names in the htree without requiring the user to provide an exact name. * Dealing with invalid sequences: By default, when a invalid UTF-8 sequence is identified, ext4 will treat it as an opaque byte sequence, ignoring the encoding and reverting to the old behavior for that unique file. This means that case-insensitive file name lookup will not work only for that file. An optional bit can be set in the superblock telling the filesystem code and userspace tools to enforce the encoding. When that optional bit is set, any attempt to create a file name using an invalid UTF-8 sequence will fail and return an error to userspace. * Normalization algorithm: The UTF-8 algorithms used to compare strings in ext4 is implemented lives in fs/unicode, and is based on a previous version developed by SGI. It implements the Canonical decomposition (NFD) algorithm described by the Unicode specification 12.1, or higher, combined with the elimination of ignorable code points (NFDi) and full case-folding (CF) as documented in fs/unicode/utf8_norm.c. NFD seems to be the best normalization method for EXT4 because: - It has a lower cost than NFC/NFKC (which requires decomposing to NFD as an intermediary step) - It doesn't eliminate important semantic meaning like compatibility decompositions. Although: - This implementation is not completely linguistic accurate, because different languages have conflicting rules, which would require the specialization of the filesystem to a given locale, which brings all sorts of problems for removable media and for users who use more than one language. Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-04-25 18:12:08 +00:00
generic_set_sb_d_ops(sb);
sb->s_root = d_make_root(root);
if (!sb->s_root) {
ext4_msg(sb, KERN_ERR, "get root dentry failed");
err = -ENOMEM;
goto failed_mount4;
}
err = ext4_setup_super(sb, es, sb_rdonly(sb));
if (err == -EROFS) {
Rename superblock flags (MS_xyz -> SB_xyz) This is a pure automated search-and-replace of the internal kernel superblock flags. The s_flags are now called SB_*, with the names and the values for the moment mirroring the MS_* flags that they're equivalent to. Note how the MS_xyz flags are the ones passed to the mount system call, while the SB_xyz flags are what we then use in sb->s_flags. The script to do this was: # places to look in; re security/*: it generally should *not* be # touched (that stuff parses mount(2) arguments directly), but # there are two places where we really deal with superblock flags. FILES="drivers/mtd drivers/staging/lustre fs ipc mm \ include/linux/fs.h include/uapi/linux/bfs_fs.h \ security/apparmor/apparmorfs.c security/apparmor/include/lib.h" # the list of MS_... constants SYMS="RDONLY NOSUID NODEV NOEXEC SYNCHRONOUS REMOUNT MANDLOCK \ DIRSYNC NOATIME NODIRATIME BIND MOVE REC VERBOSE SILENT \ POSIXACL UNBINDABLE PRIVATE SLAVE SHARED RELATIME KERNMOUNT \ I_VERSION STRICTATIME LAZYTIME SUBMOUNT NOREMOTELOCK NOSEC BORN \ ACTIVE NOUSER" SED_PROG= for i in $SYMS; do SED_PROG="$SED_PROG -e s/MS_$i/SB_$i/g"; done # we want files that contain at least one of MS_..., # with fs/namespace.c and fs/pnode.c excluded. L=$(for i in $SYMS; do git grep -w -l MS_$i $FILES; done| sort|uniq|grep -v '^fs/namespace.c'|grep -v '^fs/pnode.c') for f in $L; do sed -i $f $SED_PROG; done Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-27 21:05:09 +00:00
sb->s_flags |= SB_RDONLY;
} else if (err)
goto failed_mount4a;
ext4_set_resv_clusters(sb);
ext4: introduce reserved space Currently in ENOSPC condition when writing into unwritten space, or punching a hole, we might need to split the extent and grow extent tree. However since we can not allocate any new metadata blocks we'll have to zero out unwritten part of extent or punched out part of extent, or in the worst case return ENOSPC even though use actually does not allocate any space. Also in delalloc path we do reserve metadata and data blocks for the time we're going to write out, however metadata block reservation is very tricky especially since we expect that logical connectivity implies physical connectivity, however that might not be the case and hence we might end up allocating more metadata blocks than previously reserved. So in future, metadata reservation checks should be removed since we can not assure that we do not under reserve. And this is where reserved space comes into the picture. When mounting the file system we slice off a little bit of the file system space (2% or 4096 clusters, whichever is smaller) which can be then used for the cases mentioned above to prevent costly zeroout, or unexpected ENOSPC. The number of reserved clusters can be set via sysfs, however it can never be bigger than number of free clusters in the file system. Note that this patch fixes the failure of xfstest 274 as expected. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
2013-04-10 02:11:22 +00:00
if (test_opt(sb, BLOCK_VALIDITY)) {
err = ext4_setup_system_zone(sb);
if (err) {
ext4_msg(sb, KERN_ERR, "failed to initialize system "
"zone (%d)", err);
goto failed_mount4a;
}
}
ext4_fc_replay_cleanup(sb);
ext4_ext_init(sb);
ext4: improve cr 0 / cr 1 group scanning Instead of traversing through groups linearly, scan groups in specific orders at cr 0 and cr 1. At cr 0, we want to find groups that have the largest free order >= the order of the request. So, with this patch, we maintain lists for each possible order and insert each group into a list based on the largest free order in its buddy bitmap. During cr 0 allocation, we traverse these lists in the increasing order of largest free orders. This allows us to find a group with the best available cr 0 match in constant time. If nothing can be found, we fallback to cr 1 immediately. At CR1, the story is slightly different. We want to traverse in the order of increasing average fragment size. For CR1, we maintain a rb tree of groupinfos which is sorted by average fragment size. Instead of traversing linearly, at CR1, we traverse in the order of increasing average fragment size, starting at the most optimal group. This brings down cr 1 search complexity to log(num groups). For cr >= 2, we just perform the linear search as before. Also, in case of lock contention, we intermittently fallback to linear search even in CR 0 and CR 1 cases. This allows us to proceed during the allocation path even in case of high contention. There is an opportunity to do optimization at CR2 too. That's because at CR2 we only consider groups where bb_free counter (number of free blocks) is greater than the request extent size. That's left as future work. All the changes introduced in this patch are protected under a new mount option "mb_optimize_scan". With this patchset, following experiment was performed: Created a highly fragmented disk of size 65TB. The disk had no contiguous 2M regions. Following command was run consecutively for 3 times: time dd if=/dev/urandom of=file bs=2M count=10 Here are the results with and without cr 0/1 optimizations introduced in this patch: |---------+------------------------------+---------------------------| | | Without CR 0/1 Optimizations | With CR 0/1 Optimizations | |---------+------------------------------+---------------------------| | 1st run | 5m1.871s | 2m47.642s | | 2nd run | 2m28.390s | 0m0.611s | | 3rd run | 2m26.530s | 0m1.255s | |---------+------------------------------+---------------------------| Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com> Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Andreas Dilger <adilger@dilger.ca> Link: https://lore.kernel.org/r/20210401172129.189766-6-harshadshirwadkar@gmail.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2021-04-01 17:21:27 +00:00
/*
* Enable optimize_scan if number of groups is > threshold. This can be
* turned off by passing "mb_optimize_scan=0". This can also be
* turned on forcefully by passing "mb_optimize_scan=1".
*/
if (!(ctx->spec & EXT4_SPEC_mb_optimize_scan)) {
if (sbi->s_groups_count >= MB_DEFAULT_LINEAR_SCAN_THRESHOLD)
set_opt2(sb, MB_OPTIMIZE_SCAN);
else
clear_opt2(sb, MB_OPTIMIZE_SCAN);
}
ext4: improve cr 0 / cr 1 group scanning Instead of traversing through groups linearly, scan groups in specific orders at cr 0 and cr 1. At cr 0, we want to find groups that have the largest free order >= the order of the request. So, with this patch, we maintain lists for each possible order and insert each group into a list based on the largest free order in its buddy bitmap. During cr 0 allocation, we traverse these lists in the increasing order of largest free orders. This allows us to find a group with the best available cr 0 match in constant time. If nothing can be found, we fallback to cr 1 immediately. At CR1, the story is slightly different. We want to traverse in the order of increasing average fragment size. For CR1, we maintain a rb tree of groupinfos which is sorted by average fragment size. Instead of traversing linearly, at CR1, we traverse in the order of increasing average fragment size, starting at the most optimal group. This brings down cr 1 search complexity to log(num groups). For cr >= 2, we just perform the linear search as before. Also, in case of lock contention, we intermittently fallback to linear search even in CR 0 and CR 1 cases. This allows us to proceed during the allocation path even in case of high contention. There is an opportunity to do optimization at CR2 too. That's because at CR2 we only consider groups where bb_free counter (number of free blocks) is greater than the request extent size. That's left as future work. All the changes introduced in this patch are protected under a new mount option "mb_optimize_scan". With this patchset, following experiment was performed: Created a highly fragmented disk of size 65TB. The disk had no contiguous 2M regions. Following command was run consecutively for 3 times: time dd if=/dev/urandom of=file bs=2M count=10 Here are the results with and without cr 0/1 optimizations introduced in this patch: |---------+------------------------------+---------------------------| | | Without CR 0/1 Optimizations | With CR 0/1 Optimizations | |---------+------------------------------+---------------------------| | 1st run | 5m1.871s | 2m47.642s | | 2nd run | 2m28.390s | 0m0.611s | | 3rd run | 2m26.530s | 0m1.255s | |---------+------------------------------+---------------------------| Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com> Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Andreas Dilger <adilger@dilger.ca> Link: https://lore.kernel.org/r/20210401172129.189766-6-harshadshirwadkar@gmail.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2021-04-01 17:21:27 +00:00
err = ext4_mb_init(sb);
if (err) {
ext4_msg(sb, KERN_ERR, "failed to initialize mballoc (%d)",
err);
goto failed_mount5;
}
/*
* We can only set up the journal commit callback once
* mballoc is initialized
*/
if (sbi->s_journal)
sbi->s_journal->j_commit_callback =
ext4_journal_commit_callback;
err = ext4_percpu_param_init(sbi);
if (err)
goto failed_mount6;
if (ext4_has_feature_flex_bg(sb))
if (!ext4_fill_flex_info(sb)) {
ext4_msg(sb, KERN_ERR,
"unable to initialize "
"flex_bg meta info!");
err = -ENOMEM;
goto failed_mount6;
}
ext4: add support for lazy inode table initialization When the lazy_itable_init extended option is passed to mke2fs, it considerably speeds up filesystem creation because inode tables are not zeroed out. The fact that parts of the inode table are uninitialized is not a problem so long as the block group descriptors, which contain information regarding how much of the inode table has been initialized, has not been corrupted However, if the block group checksums are not valid, e2fsck must scan the entire inode table, and the the old, uninitialized data could potentially cause e2fsck to report false problems. Hence, it is important for the inode tables to be initialized as soon as possble. This commit adds this feature so that mke2fs can safely use the lazy inode table initialization feature to speed up formatting file systems. This is done via a new new kernel thread called ext4lazyinit, which is created on demand and destroyed, when it is no longer needed. There is only one thread for all ext4 filesystems in the system. When the first filesystem with inititable mount option is mounted, ext4lazyinit thread is created, then the filesystem can register its request in the request list. This thread then walks through the list of requests picking up scheduled requests and invoking ext4_init_inode_table(). Next schedule time for the request is computed by multiplying the time it took to zero out last inode table with wait multiplier, which can be set with the (init_itable=n) mount option (default is 10). We are doing this so we do not take the whole I/O bandwidth. When the thread is no longer necessary (request list is empty) it frees the appropriate structures and exits (and can be created later later by another filesystem). We do not disturb regular inode allocations in any way, it just do not care whether the inode table is, or is not zeroed. But when zeroing, we have to skip used inodes, obviously. Also we should prevent new inode allocations from the group, while zeroing is on the way. For that we take write alloc_sem lock in ext4_init_inode_table() and read alloc_sem in the ext4_claim_inode, so when we are unlucky and allocator hits the group which is currently being zeroed, it just has to wait. This can be suppresed using the mount option no_init_itable. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-28 01:30:05 +00:00
err = ext4_register_li_request(sb, first_not_zeroed);
if (err)
goto failed_mount6;
ext4: add support for lazy inode table initialization When the lazy_itable_init extended option is passed to mke2fs, it considerably speeds up filesystem creation because inode tables are not zeroed out. The fact that parts of the inode table are uninitialized is not a problem so long as the block group descriptors, which contain information regarding how much of the inode table has been initialized, has not been corrupted However, if the block group checksums are not valid, e2fsck must scan the entire inode table, and the the old, uninitialized data could potentially cause e2fsck to report false problems. Hence, it is important for the inode tables to be initialized as soon as possble. This commit adds this feature so that mke2fs can safely use the lazy inode table initialization feature to speed up formatting file systems. This is done via a new new kernel thread called ext4lazyinit, which is created on demand and destroyed, when it is no longer needed. There is only one thread for all ext4 filesystems in the system. When the first filesystem with inititable mount option is mounted, ext4lazyinit thread is created, then the filesystem can register its request in the request list. This thread then walks through the list of requests picking up scheduled requests and invoking ext4_init_inode_table(). Next schedule time for the request is computed by multiplying the time it took to zero out last inode table with wait multiplier, which can be set with the (init_itable=n) mount option (default is 10). We are doing this so we do not take the whole I/O bandwidth. When the thread is no longer necessary (request list is empty) it frees the appropriate structures and exits (and can be created later later by another filesystem). We do not disturb regular inode allocations in any way, it just do not care whether the inode table is, or is not zeroed. But when zeroing, we have to skip used inodes, obviously. Also we should prevent new inode allocations from the group, while zeroing is on the way. For that we take write alloc_sem lock in ext4_init_inode_table() and read alloc_sem in the ext4_claim_inode, so when we are unlucky and allocator hits the group which is currently being zeroed, it just has to wait. This can be suppresed using the mount option no_init_itable. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-28 01:30:05 +00:00
err = ext4_register_sysfs(sb);
if (err)
goto failed_mount7;
ext4: Speedup ext4 orphan inode handling Ext4 orphan inode handling is a bottleneck for workloads which heavily truncate / unlink small files since it contends on the global s_orphan_mutex lock (and generally it's difficult to improve scalability of the ondisk linked list of orphaned inodes). This patch implements new way of handling orphan inodes. Instead of linking orphaned inode into a linked list, we store it's inode number in a new special file which we call "orphan file". Only if there's no more space in the orphan file (too many inodes are currently orphaned) we fall back to using old style linked list. Currently we protect operations in the orphan file with a spinlock for simplicity but even in this setting we can substantially reduce the length of the critical section and thus speedup some workloads. In the next patch we improve this by making orphan handling lockless. Note that the change is backwards compatible when the filesystem is clean - the existence of the orphan file is a compat feature, we set another ro-compat feature indicating orphan file needs scanning for orphaned inodes when mounting filesystem read-write. This ro-compat feature gets cleared on unmount / remount read-only. Some performance data from 80 CPU Xeon Server with 512 GB of RAM, filesystem located on SSD, average of 5 runs: stress-orphan (microbenchmark truncating files byte-by-byte from N processes in parallel) Threads Time Time Vanilla Patched 1 1.057200 0.945600 2 1.680400 1.331800 4 2.547000 1.995000 8 7.049400 6.424200 16 14.827800 14.937600 32 40.948200 33.038200 64 87.787400 60.823600 128 206.504000 122.941400 So we can see significant wins all over the board. Reviewed-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20210816095713.16537-3-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2021-08-16 09:57:06 +00:00
err = ext4_init_orphan_info(sb);
if (err)
goto failed_mount8;
#ifdef CONFIG_QUOTA
/* Enable quota usage during mount. */
if (ext4_has_feature_quota(sb) && !sb_rdonly(sb)) {
err = ext4_enable_quotas(sb);
if (err)
ext4: Speedup ext4 orphan inode handling Ext4 orphan inode handling is a bottleneck for workloads which heavily truncate / unlink small files since it contends on the global s_orphan_mutex lock (and generally it's difficult to improve scalability of the ondisk linked list of orphaned inodes). This patch implements new way of handling orphan inodes. Instead of linking orphaned inode into a linked list, we store it's inode number in a new special file which we call "orphan file". Only if there's no more space in the orphan file (too many inodes are currently orphaned) we fall back to using old style linked list. Currently we protect operations in the orphan file with a spinlock for simplicity but even in this setting we can substantially reduce the length of the critical section and thus speedup some workloads. In the next patch we improve this by making orphan handling lockless. Note that the change is backwards compatible when the filesystem is clean - the existence of the orphan file is a compat feature, we set another ro-compat feature indicating orphan file needs scanning for orphaned inodes when mounting filesystem read-write. This ro-compat feature gets cleared on unmount / remount read-only. Some performance data from 80 CPU Xeon Server with 512 GB of RAM, filesystem located on SSD, average of 5 runs: stress-orphan (microbenchmark truncating files byte-by-byte from N processes in parallel) Threads Time Time Vanilla Patched 1 1.057200 0.945600 2 1.680400 1.331800 4 2.547000 1.995000 8 7.049400 6.424200 16 14.827800 14.937600 32 40.948200 33.038200 64 87.787400 60.823600 128 206.504000 122.941400 So we can see significant wins all over the board. Reviewed-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20210816095713.16537-3-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2021-08-16 09:57:06 +00:00
goto failed_mount9;
}
#endif /* CONFIG_QUOTA */
/*
* Save the original bdev mapping's wb_err value which could be
* used to detect the metadata async write error.
*/
spin_lock_init(&sbi->s_bdev_wb_lock);
errseq_check_and_advance(&sb->s_bdev->bd_inode->i_mapping->wb_err,
&sbi->s_bdev_wb_err);
EXT4_SB(sb)->s_mount_state |= EXT4_ORPHAN_FS;
ext4_orphan_cleanup(sb, es);
EXT4_SB(sb)->s_mount_state &= ~EXT4_ORPHAN_FS;
/*
* Update the checksum after updating free space/inode counters and
* ext4_orphan_cleanup. Otherwise the superblock can have an incorrect
* checksum in the buffer cache until it is written out and
* e2fsprogs programs trying to open a file system immediately
* after it is mounted can fail.
*/
ext4_superblock_csum_set(sb);
if (needs_recovery) {
ext4_msg(sb, KERN_INFO, "recovery complete");
err = ext4_mark_recovery_complete(sb, es);
if (err)
ext4: turn quotas off if mount failed after enabling quotas Yi found during a review of the patch "ext4: don't BUG on inconsistent journal feature" that when ext4_mark_recovery_complete() returns an error value, the error handling path does not turn off the enabled quotas, which triggers the following kmemleak: ================================================================ unreferenced object 0xffff8cf68678e7c0 (size 64): comm "mount", pid 746, jiffies 4294871231 (age 11.540s) hex dump (first 32 bytes): 00 90 ef 82 f6 8c ff ff 00 00 00 00 41 01 00 00 ............A... c7 00 00 00 bd 00 00 00 0a 00 00 00 48 00 00 00 ............H... backtrace: [<00000000c561ef24>] __kmem_cache_alloc_node+0x4d4/0x880 [<00000000d4e621d7>] kmalloc_trace+0x39/0x140 [<00000000837eee74>] v2_read_file_info+0x18a/0x3a0 [<0000000088f6c877>] dquot_load_quota_sb+0x2ed/0x770 [<00000000340a4782>] dquot_load_quota_inode+0xc6/0x1c0 [<0000000089a18bd5>] ext4_enable_quotas+0x17e/0x3a0 [ext4] [<000000003a0268fa>] __ext4_fill_super+0x3448/0x3910 [ext4] [<00000000b0f2a8a8>] ext4_fill_super+0x13d/0x340 [ext4] [<000000004a9489c4>] get_tree_bdev+0x1dc/0x370 [<000000006e723bf1>] ext4_get_tree+0x1d/0x30 [ext4] [<00000000c7cb663d>] vfs_get_tree+0x31/0x160 [<00000000320e1bed>] do_new_mount+0x1d5/0x480 [<00000000c074654c>] path_mount+0x22e/0xbe0 [<0000000003e97a8e>] do_mount+0x95/0xc0 [<000000002f3d3736>] __x64_sys_mount+0xc4/0x160 [<0000000027d2140c>] do_syscall_64+0x3f/0x90 ================================================================ To solve this problem, we add a "failed_mount10" tag, and call ext4_quota_off_umount() in this tag to release the enabled qoutas. Fixes: 11215630aada ("ext4: don't BUG on inconsistent journal feature") Cc: stable@kernel.org Signed-off-by: Zhang Yi <yi.zhang@huawei.com> Signed-off-by: Baokun Li <libaokun1@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20230327141630.156875-2-libaokun1@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2023-03-27 14:16:29 +00:00
goto failed_mount10;
}
if (test_opt(sb, DISCARD) && !bdev_max_discard_sectors(sb->s_bdev))
ext4_msg(sb, KERN_WARNING,
"mounting with \"discard\" option, but the device does not support discard");
if (es->s_error_count)
mod_timer(&sbi->s_err_report, jiffies + 300*HZ); /* 5 minutes */
/* Enable message ratelimiting. Default is 10 messages per 5 secs. */
ratelimit_state_init(&sbi->s_err_ratelimit_state, 5 * HZ, 10);
ratelimit_state_init(&sbi->s_warning_ratelimit_state, 5 * HZ, 10);
ratelimit_state_init(&sbi->s_msg_ratelimit_state, 5 * HZ, 10);
atomic_set(&sbi->s_warning_count, 0);
atomic_set(&sbi->s_msg_count, 0);
return 0;
ext4: turn quotas off if mount failed after enabling quotas Yi found during a review of the patch "ext4: don't BUG on inconsistent journal feature" that when ext4_mark_recovery_complete() returns an error value, the error handling path does not turn off the enabled quotas, which triggers the following kmemleak: ================================================================ unreferenced object 0xffff8cf68678e7c0 (size 64): comm "mount", pid 746, jiffies 4294871231 (age 11.540s) hex dump (first 32 bytes): 00 90 ef 82 f6 8c ff ff 00 00 00 00 41 01 00 00 ............A... c7 00 00 00 bd 00 00 00 0a 00 00 00 48 00 00 00 ............H... backtrace: [<00000000c561ef24>] __kmem_cache_alloc_node+0x4d4/0x880 [<00000000d4e621d7>] kmalloc_trace+0x39/0x140 [<00000000837eee74>] v2_read_file_info+0x18a/0x3a0 [<0000000088f6c877>] dquot_load_quota_sb+0x2ed/0x770 [<00000000340a4782>] dquot_load_quota_inode+0xc6/0x1c0 [<0000000089a18bd5>] ext4_enable_quotas+0x17e/0x3a0 [ext4] [<000000003a0268fa>] __ext4_fill_super+0x3448/0x3910 [ext4] [<00000000b0f2a8a8>] ext4_fill_super+0x13d/0x340 [ext4] [<000000004a9489c4>] get_tree_bdev+0x1dc/0x370 [<000000006e723bf1>] ext4_get_tree+0x1d/0x30 [ext4] [<00000000c7cb663d>] vfs_get_tree+0x31/0x160 [<00000000320e1bed>] do_new_mount+0x1d5/0x480 [<00000000c074654c>] path_mount+0x22e/0xbe0 [<0000000003e97a8e>] do_mount+0x95/0xc0 [<000000002f3d3736>] __x64_sys_mount+0xc4/0x160 [<0000000027d2140c>] do_syscall_64+0x3f/0x90 ================================================================ To solve this problem, we add a "failed_mount10" tag, and call ext4_quota_off_umount() in this tag to release the enabled qoutas. Fixes: 11215630aada ("ext4: don't BUG on inconsistent journal feature") Cc: stable@kernel.org Signed-off-by: Zhang Yi <yi.zhang@huawei.com> Signed-off-by: Baokun Li <libaokun1@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20230327141630.156875-2-libaokun1@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2023-03-27 14:16:29 +00:00
failed_mount10:
ext4_quotas_off(sb, EXT4_MAXQUOTAS);
ext4: turn quotas off if mount failed after enabling quotas Yi found during a review of the patch "ext4: don't BUG on inconsistent journal feature" that when ext4_mark_recovery_complete() returns an error value, the error handling path does not turn off the enabled quotas, which triggers the following kmemleak: ================================================================ unreferenced object 0xffff8cf68678e7c0 (size 64): comm "mount", pid 746, jiffies 4294871231 (age 11.540s) hex dump (first 32 bytes): 00 90 ef 82 f6 8c ff ff 00 00 00 00 41 01 00 00 ............A... c7 00 00 00 bd 00 00 00 0a 00 00 00 48 00 00 00 ............H... backtrace: [<00000000c561ef24>] __kmem_cache_alloc_node+0x4d4/0x880 [<00000000d4e621d7>] kmalloc_trace+0x39/0x140 [<00000000837eee74>] v2_read_file_info+0x18a/0x3a0 [<0000000088f6c877>] dquot_load_quota_sb+0x2ed/0x770 [<00000000340a4782>] dquot_load_quota_inode+0xc6/0x1c0 [<0000000089a18bd5>] ext4_enable_quotas+0x17e/0x3a0 [ext4] [<000000003a0268fa>] __ext4_fill_super+0x3448/0x3910 [ext4] [<00000000b0f2a8a8>] ext4_fill_super+0x13d/0x340 [ext4] [<000000004a9489c4>] get_tree_bdev+0x1dc/0x370 [<000000006e723bf1>] ext4_get_tree+0x1d/0x30 [ext4] [<00000000c7cb663d>] vfs_get_tree+0x31/0x160 [<00000000320e1bed>] do_new_mount+0x1d5/0x480 [<00000000c074654c>] path_mount+0x22e/0xbe0 [<0000000003e97a8e>] do_mount+0x95/0xc0 [<000000002f3d3736>] __x64_sys_mount+0xc4/0x160 [<0000000027d2140c>] do_syscall_64+0x3f/0x90 ================================================================ To solve this problem, we add a "failed_mount10" tag, and call ext4_quota_off_umount() in this tag to release the enabled qoutas. Fixes: 11215630aada ("ext4: don't BUG on inconsistent journal feature") Cc: stable@kernel.org Signed-off-by: Zhang Yi <yi.zhang@huawei.com> Signed-off-by: Baokun Li <libaokun1@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20230327141630.156875-2-libaokun1@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2023-03-27 14:16:29 +00:00
failed_mount9: __maybe_unused
ext4: Speedup ext4 orphan inode handling Ext4 orphan inode handling is a bottleneck for workloads which heavily truncate / unlink small files since it contends on the global s_orphan_mutex lock (and generally it's difficult to improve scalability of the ondisk linked list of orphaned inodes). This patch implements new way of handling orphan inodes. Instead of linking orphaned inode into a linked list, we store it's inode number in a new special file which we call "orphan file". Only if there's no more space in the orphan file (too many inodes are currently orphaned) we fall back to using old style linked list. Currently we protect operations in the orphan file with a spinlock for simplicity but even in this setting we can substantially reduce the length of the critical section and thus speedup some workloads. In the next patch we improve this by making orphan handling lockless. Note that the change is backwards compatible when the filesystem is clean - the existence of the orphan file is a compat feature, we set another ro-compat feature indicating orphan file needs scanning for orphaned inodes when mounting filesystem read-write. This ro-compat feature gets cleared on unmount / remount read-only. Some performance data from 80 CPU Xeon Server with 512 GB of RAM, filesystem located on SSD, average of 5 runs: stress-orphan (microbenchmark truncating files byte-by-byte from N processes in parallel) Threads Time Time Vanilla Patched 1 1.057200 0.945600 2 1.680400 1.331800 4 2.547000 1.995000 8 7.049400 6.424200 16 14.827800 14.937600 32 40.948200 33.038200 64 87.787400 60.823600 128 206.504000 122.941400 So we can see significant wins all over the board. Reviewed-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20210816095713.16537-3-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2021-08-16 09:57:06 +00:00
ext4_release_orphan_info(sb);
failed_mount8:
ext4_unregister_sysfs(sb);
kobject_put(&sbi->s_kobj);
failed_mount7:
ext4_unregister_li_request(sb);
failed_mount6:
ext4_mb_release(sb);
ext4_flex_groups_free(sbi);
ext4_percpu_param_destroy(sbi);
ext4: initialize multi-block allocator before checking block descriptors With EXT4FS_DEBUG ext4_count_free_clusters() will call ext4_read_block_bitmap() without s_group_info initialized, so we need to initialize multi-block allocator before. And dependencies that must be solved, to allow this: - multi-block allocator needs in group descriptors - need to install s_op before initializing multi-block allocator, because in ext4_mb_init_backend() new inode is created. - initialize number of group desc blocks (s_gdb_count) otherwise number of clusters returned by ext4_free_clusters_after_init() is not correct. (see ext4_bg_num_gdb_nometa()) Here is the stack backtrace: (gdb) bt #0 ext4_get_group_info (group=0, sb=0xffff880079a10000) at ext4.h:2430 #1 ext4_validate_block_bitmap (sb=sb@entry=0xffff880079a10000, desc=desc@entry=0xffff880056510000, block_group=block_group@entry=0, bh=bh@entry=0xffff88007bf2b2d8) at balloc.c:358 #2 0xffffffff81232202 in ext4_wait_block_bitmap (sb=sb@entry=0xffff880079a10000, block_group=block_group@entry=0, bh=bh@entry=0xffff88007bf2b2d8) at balloc.c:476 #3 0xffffffff81232eaf in ext4_read_block_bitmap (sb=sb@entry=0xffff880079a10000, block_group=block_group@entry=0) at balloc.c:489 #4 0xffffffff81232fc0 in ext4_count_free_clusters (sb=sb@entry=0xffff880079a10000) at balloc.c:665 #5 0xffffffff81259ffa in ext4_check_descriptors (first_not_zeroed=<synthetic pointer>, sb=0xffff880079a10000) at super.c:2143 #6 ext4_fill_super (sb=sb@entry=0xffff880079a10000, data=<optimized out>, data@entry=0x0 <irq_stack_union>, silent=silent@entry=0) at super.c:3851 ... Signed-off-by: Azat Khuzhin <a3at.mail@gmail.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2014-04-07 14:54:20 +00:00
failed_mount5:
ext4_ext_release(sb);
ext4_release_system_zone(sb);
failed_mount4a:
dput(sb->s_root);
sb->s_root = NULL;
failed_mount4:
ext4_msg(sb, KERN_ERR, "mount failed");
if (EXT4_SB(sb)->rsv_conversion_wq)
destroy_workqueue(EXT4_SB(sb)->rsv_conversion_wq);
failed_mount_wq:
ext4_xattr_destroy_cache(sbi->s_ea_inode_cache);
sbi->s_ea_inode_cache = NULL;
ext4_xattr_destroy_cache(sbi->s_ea_block_cache);
sbi->s_ea_block_cache = NULL;
if (sbi->s_journal) {
/* flush s_sb_upd_work before journal destroy. */
flush_work(&sbi->s_sb_upd_work);
jbd2_journal_destroy(sbi->s_journal);
sbi->s_journal = NULL;
}
failed_mount3a:
ext4: improve extent cache shrink mechanism to avoid to burn CPU time Now we maintain an proper in-order LRU list in ext4 to reclaim entries from extent status tree when we are under heavy memory pressure. For keeping this order, a spin lock is used to protect this list. But this lock burns a lot of CPU time. We can use the following steps to trigger it. % cd /dev/shm % dd if=/dev/zero of=ext4-img bs=1M count=2k % mkfs.ext4 ext4-img % mount -t ext4 -o loop ext4-img /mnt % cd /mnt % for ((i=0;i<160;i++)); do truncate -s 64g $i; done % for ((i=0;i<160;i++)); do cp $i /dev/null &; done % perf record -a -g % perf report This commit tries to fix this problem. Now a new member called i_touch_when is added into ext4_inode_info to record the last access time for an inode. Meanwhile we never need to keep a proper in-order LRU list. So this can avoid to burns some CPU time. When we try to reclaim some entries from extent status tree, we use list_sort() to get a proper in-order list. Then we traverse this list to discard some entries. In ext4_sb_info, we use s_es_last_sorted to record the last time of sorting this list. When we traverse the list, we skip the inode that is newer than this time, and move this inode to the tail of LRU list. When the head of the list is newer than s_es_last_sorted, we will sort the LRU list again. In this commit, we break the loop if s_extent_cache_cnt == 0 because that means that all extents in extent status tree have been reclaimed. Meanwhile in this commit, ext4_es_{un}register_shrinker()'s prototype is changed to save a local variable in these functions. Reported-by: Dave Hansen <dave.hansen@intel.com> Signed-off-by: Zheng Liu <wenqing.lz@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-07-01 12:12:37 +00:00
ext4_es_unregister_shrinker(sbi);
ext4: track extent status tree shrinker delay statictics This commit adds some statictics in extent status tree shrinker. The purpose to add these is that we want to collect more details when we encounter a stall caused by extent status tree shrinker. Here we count the following statictics: stats: the number of all objects on all extent status trees the number of reclaimable objects on lru list cache hits/misses the last sorted interval the number of inodes on lru list average: scan time for shrinking some objects the number of shrunk objects maximum: the inode that has max nr. of objects on lru list the maximum scan time for shrinking some objects The output looks like below: $ cat /proc/fs/ext4/sda1/es_shrinker_info stats: 28228 objects 6341 reclaimable objects 5281/631 cache hits/misses 586 ms last sorted interval 250 inodes on lru list average: 153 us scan time 128 shrunk objects maximum: 255 inode (255 objects, 198 reclaimable) 125723 us max scan time If the lru list has never been sorted, the following line will not be printed: 586ms last sorted interval If there is an empty lru list, the following lines also will not be printed: 250 inodes on lru list ... maximum: 255 inode (255 objects, 198 reclaimable) 0 us max scan time Meanwhile in this commit a new trace point is defined to print some details in __ext4_es_shrink(). Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Jan Kara <jack@suse.cz> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Zheng Liu <wenqing.lz@taobao.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2014-09-02 02:26:49 +00:00
failed_mount3:
/* flush s_sb_upd_work before sbi destroy */
flush_work(&sbi->s_sb_upd_work);
del_timer_sync(&sbi->s_err_report);
ext4_stop_mmpd(sbi);
ext4_group_desc_free(sbi);
failed_mount:
if (sbi->s_chksum_driver)
crypto_free_shash(sbi->s_chksum_driver);
#if IS_ENABLED(CONFIG_UNICODE)
utf8_unload(sb->s_encoding);
#endif
#ifdef CONFIG_QUOTA
for (unsigned int i = 0; i < EXT4_MAXQUOTAS; i++)
kfree(get_qf_name(sb, sbi, i));
#endif
fscrypt: handle test_dummy_encryption in more logical way The behavior of the test_dummy_encryption mount option is that when a new file (or directory or symlink) is created in an unencrypted directory, it's automatically encrypted using a dummy encryption policy. That's it; in particular, the encryption (or lack thereof) of existing files (or directories or symlinks) doesn't change. Unfortunately the implementation of test_dummy_encryption is a bit weird and confusing. When test_dummy_encryption is enabled and a file is being created in an unencrypted directory, we set up an encryption key (->i_crypt_info) for the directory. This isn't actually used to do any encryption, however, since the directory is still unencrypted! Instead, ->i_crypt_info is only used for inheriting the encryption policy. One consequence of this is that the filesystem ends up providing a "dummy context" (policy + nonce) instead of a "dummy policy". In commit ed318a6cc0b6 ("fscrypt: support test_dummy_encryption=v2"), I mistakenly thought this was required. However, actually the nonce only ends up being used to derive a key that is never used. Another consequence of this implementation is that it allows for 'inode->i_crypt_info != NULL && !IS_ENCRYPTED(inode)', which is an edge case that can be forgotten about. For example, currently FS_IOC_GET_ENCRYPTION_POLICY on an unencrypted directory may return the dummy encryption policy when the filesystem is mounted with test_dummy_encryption. That seems like the wrong thing to do, since again, the directory itself is not actually encrypted. Therefore, switch to a more logical and maintainable implementation where the dummy encryption policy inheritance is done without setting up keys for unencrypted directories. This involves: - Adding a function fscrypt_policy_to_inherit() which returns the encryption policy to inherit from a directory. This can be a real policy, a dummy policy, or no policy. - Replacing struct fscrypt_dummy_context, ->get_dummy_context(), etc. with struct fscrypt_dummy_policy, ->get_dummy_policy(), etc. - Making fscrypt_fname_encrypted_size() take an fscrypt_policy instead of an inode. Acked-by: Jaegeuk Kim <jaegeuk@kernel.org> Acked-by: Jeff Layton <jlayton@kernel.org> Link: https://lore.kernel.org/r/20200917041136.178600-13-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com>
2020-09-17 04:11:35 +00:00
fscrypt_free_dummy_policy(&sbi->s_dummy_enc_policy);
brelse(sbi->s_sbh);
if (sbi->s_journal_bdev_file) {
invalidate_bdev(file_bdev(sbi->s_journal_bdev_file));
bdev_fput(sbi->s_journal_bdev_file);
}
out_fail:
ext4: Fix reusing stale buffer heads from last failed mounting Following process makes ext4 load stale buffer heads from last failed mounting in a new mounting operation: mount_bdev ext4_fill_super | ext4_load_and_init_journal | ext4_load_journal | jbd2_journal_load | load_superblock | journal_get_superblock | set_buffer_verified(bh) // buffer head is verified | jbd2_journal_recover // failed caused by EIO | goto failed_mount3a // skip 'sb->s_root' initialization deactivate_locked_super kill_block_super generic_shutdown_super if (sb->s_root) // false, skip ext4_put_super->invalidate_bdev-> // invalidate_mapping_pages->mapping_evict_folio-> // filemap_release_folio->try_to_free_buffers, which // cannot drop buffer head. blkdev_put blkdev_put_whole if (atomic_dec_and_test(&bdev->bd_openers)) // false, systemd-udev happens to open the device. Then // blkdev_flush_mapping->kill_bdev->truncate_inode_pages-> // truncate_inode_folio->truncate_cleanup_folio-> // folio_invalidate->block_invalidate_folio-> // filemap_release_folio->try_to_free_buffers will be skipped, // dropping buffer head is missed again. Second mount: ext4_fill_super ext4_load_and_init_journal ext4_load_journal ext4_get_journal jbd2_journal_init_inode journal_init_common bh = getblk_unmovable bh = __find_get_block // Found stale bh in last failed mounting journal->j_sb_buffer = bh jbd2_journal_load load_superblock journal_get_superblock if (buffer_verified(bh)) // true, skip journal->j_format_version = 2, value is 0 jbd2_journal_recover do_one_pass next_log_block += count_tags(journal, bh) // According to journal_tag_bytes(), 'tag_bytes' calculating is // affected by jbd2_has_feature_csum3(), jbd2_has_feature_csum3() // returns false because 'j->j_format_version >= 2' is not true, // then we get wrong next_log_block. The do_one_pass may exit // early whenoccuring non JBD2_MAGIC_NUMBER in 'next_log_block'. The filesystem is corrupted here, journal is partially replayed, and new journal sequence number actually is already used by last mounting. The invalidate_bdev() can drop all buffer heads even racing with bare reading block device(eg. systemd-udev), so we can fix it by invalidating bdev in error handling path in __ext4_fill_super(). Fetch a reproducer in [Link]. Link: https://bugzilla.kernel.org/show_bug.cgi?id=217171 Fixes: 25ed6e8a54df ("jbd2: enable journal clients to enable v2 checksumming") Cc: stable@vger.kernel.org # v3.5 Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20230315013128.3911115-2-chengzhihao1@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2023-03-15 01:31:23 +00:00
invalidate_bdev(sb->s_bdev);
sb->s_fs_info = NULL;
return err;
}
static int ext4_fill_super(struct super_block *sb, struct fs_context *fc)
ext4: Completely separate options parsing and sb setup The new mount api separates option parsing and super block setup into two distinct steps and so we need to separate the options parsing out of the ext4_fill_super() and ext4_remount(). In order to achieve this we have to create new ext4_fill_super() and ext4_remount() functions which will serve its purpose only until we actually do convert to the new api (as such they are only temporary for this patch series) and move the option parsing out of the old function which will now be renamed to __ext4_fill_super() and __ext4_remount(). There is a small complication in the fact that while the mount option parsing is going to happen before we get to __ext4_fill_super(), the mount options stored in the super block itself needs to be applied first, before the user specified mount options. So with this patch we're going through the following sequence: - parse user provided options (including sb block) - initialize sbi and store s_sb_block if provided - in __ext4_fill_super() - read the super block - parse and apply options specified in s_mount_opts - check and apply user provided options stored in ctx - continue with the regular ext4_fill_super operation It's not exactly the most elegant solution, but if we still want to support s_mount_opts we have to do it in this order. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Link: https://lore.kernel.org/r/20211027141857.33657-10-lczerner@redhat.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2021-10-27 14:18:53 +00:00
{
struct ext4_fs_context *ctx = fc->fs_private;
ext4: Completely separate options parsing and sb setup The new mount api separates option parsing and super block setup into two distinct steps and so we need to separate the options parsing out of the ext4_fill_super() and ext4_remount(). In order to achieve this we have to create new ext4_fill_super() and ext4_remount() functions which will serve its purpose only until we actually do convert to the new api (as such they are only temporary for this patch series) and move the option parsing out of the old function which will now be renamed to __ext4_fill_super() and __ext4_remount(). There is a small complication in the fact that while the mount option parsing is going to happen before we get to __ext4_fill_super(), the mount options stored in the super block itself needs to be applied first, before the user specified mount options. So with this patch we're going through the following sequence: - parse user provided options (including sb block) - initialize sbi and store s_sb_block if provided - in __ext4_fill_super() - read the super block - parse and apply options specified in s_mount_opts - check and apply user provided options stored in ctx - continue with the regular ext4_fill_super operation It's not exactly the most elegant solution, but if we still want to support s_mount_opts we have to do it in this order. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Link: https://lore.kernel.org/r/20211027141857.33657-10-lczerner@redhat.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2021-10-27 14:18:53 +00:00
struct ext4_sb_info *sbi;
const char *descr;
int ret;
ext4: Completely separate options parsing and sb setup The new mount api separates option parsing and super block setup into two distinct steps and so we need to separate the options parsing out of the ext4_fill_super() and ext4_remount(). In order to achieve this we have to create new ext4_fill_super() and ext4_remount() functions which will serve its purpose only until we actually do convert to the new api (as such they are only temporary for this patch series) and move the option parsing out of the old function which will now be renamed to __ext4_fill_super() and __ext4_remount(). There is a small complication in the fact that while the mount option parsing is going to happen before we get to __ext4_fill_super(), the mount options stored in the super block itself needs to be applied first, before the user specified mount options. So with this patch we're going through the following sequence: - parse user provided options (including sb block) - initialize sbi and store s_sb_block if provided - in __ext4_fill_super() - read the super block - parse and apply options specified in s_mount_opts - check and apply user provided options stored in ctx - continue with the regular ext4_fill_super operation It's not exactly the most elegant solution, but if we still want to support s_mount_opts we have to do it in this order. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Link: https://lore.kernel.org/r/20211027141857.33657-10-lczerner@redhat.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2021-10-27 14:18:53 +00:00
sbi = ext4_alloc_sbi(sb);
if (!sbi)
return -ENOMEM;
ext4: Completely separate options parsing and sb setup The new mount api separates option parsing and super block setup into two distinct steps and so we need to separate the options parsing out of the ext4_fill_super() and ext4_remount(). In order to achieve this we have to create new ext4_fill_super() and ext4_remount() functions which will serve its purpose only until we actually do convert to the new api (as such they are only temporary for this patch series) and move the option parsing out of the old function which will now be renamed to __ext4_fill_super() and __ext4_remount(). There is a small complication in the fact that while the mount option parsing is going to happen before we get to __ext4_fill_super(), the mount options stored in the super block itself needs to be applied first, before the user specified mount options. So with this patch we're going through the following sequence: - parse user provided options (including sb block) - initialize sbi and store s_sb_block if provided - in __ext4_fill_super() - read the super block - parse and apply options specified in s_mount_opts - check and apply user provided options stored in ctx - continue with the regular ext4_fill_super operation It's not exactly the most elegant solution, but if we still want to support s_mount_opts we have to do it in this order. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Link: https://lore.kernel.org/r/20211027141857.33657-10-lczerner@redhat.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2021-10-27 14:18:53 +00:00
fc->s_fs_info = sbi;
/* Cleanup superblock name */
strreplace(sb->s_id, '/', '!');
ext4: Completely separate options parsing and sb setup The new mount api separates option parsing and super block setup into two distinct steps and so we need to separate the options parsing out of the ext4_fill_super() and ext4_remount(). In order to achieve this we have to create new ext4_fill_super() and ext4_remount() functions which will serve its purpose only until we actually do convert to the new api (as such they are only temporary for this patch series) and move the option parsing out of the old function which will now be renamed to __ext4_fill_super() and __ext4_remount(). There is a small complication in the fact that while the mount option parsing is going to happen before we get to __ext4_fill_super(), the mount options stored in the super block itself needs to be applied first, before the user specified mount options. So with this patch we're going through the following sequence: - parse user provided options (including sb block) - initialize sbi and store s_sb_block if provided - in __ext4_fill_super() - read the super block - parse and apply options specified in s_mount_opts - check and apply user provided options stored in ctx - continue with the regular ext4_fill_super operation It's not exactly the most elegant solution, but if we still want to support s_mount_opts we have to do it in this order. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Link: https://lore.kernel.org/r/20211027141857.33657-10-lczerner@redhat.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2021-10-27 14:18:53 +00:00
sbi->s_sb_block = 1; /* Default super block location */
if (ctx->spec & EXT4_SPEC_s_sb_block)
sbi->s_sb_block = ctx->s_sb_block;
ext4: Completely separate options parsing and sb setup The new mount api separates option parsing and super block setup into two distinct steps and so we need to separate the options parsing out of the ext4_fill_super() and ext4_remount(). In order to achieve this we have to create new ext4_fill_super() and ext4_remount() functions which will serve its purpose only until we actually do convert to the new api (as such they are only temporary for this patch series) and move the option parsing out of the old function which will now be renamed to __ext4_fill_super() and __ext4_remount(). There is a small complication in the fact that while the mount option parsing is going to happen before we get to __ext4_fill_super(), the mount options stored in the super block itself needs to be applied first, before the user specified mount options. So with this patch we're going through the following sequence: - parse user provided options (including sb block) - initialize sbi and store s_sb_block if provided - in __ext4_fill_super() - read the super block - parse and apply options specified in s_mount_opts - check and apply user provided options stored in ctx - continue with the regular ext4_fill_super operation It's not exactly the most elegant solution, but if we still want to support s_mount_opts we have to do it in this order. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Link: https://lore.kernel.org/r/20211027141857.33657-10-lczerner@redhat.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2021-10-27 14:18:53 +00:00
ret = __ext4_fill_super(fc, sb);
ext4: Completely separate options parsing and sb setup The new mount api separates option parsing and super block setup into two distinct steps and so we need to separate the options parsing out of the ext4_fill_super() and ext4_remount(). In order to achieve this we have to create new ext4_fill_super() and ext4_remount() functions which will serve its purpose only until we actually do convert to the new api (as such they are only temporary for this patch series) and move the option parsing out of the old function which will now be renamed to __ext4_fill_super() and __ext4_remount(). There is a small complication in the fact that while the mount option parsing is going to happen before we get to __ext4_fill_super(), the mount options stored in the super block itself needs to be applied first, before the user specified mount options. So with this patch we're going through the following sequence: - parse user provided options (including sb block) - initialize sbi and store s_sb_block if provided - in __ext4_fill_super() - read the super block - parse and apply options specified in s_mount_opts - check and apply user provided options stored in ctx - continue with the regular ext4_fill_super operation It's not exactly the most elegant solution, but if we still want to support s_mount_opts we have to do it in this order. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Link: https://lore.kernel.org/r/20211027141857.33657-10-lczerner@redhat.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2021-10-27 14:18:53 +00:00
if (ret < 0)
goto free_sbi;
if (sbi->s_journal) {
ext4: Completely separate options parsing and sb setup The new mount api separates option parsing and super block setup into two distinct steps and so we need to separate the options parsing out of the ext4_fill_super() and ext4_remount(). In order to achieve this we have to create new ext4_fill_super() and ext4_remount() functions which will serve its purpose only until we actually do convert to the new api (as such they are only temporary for this patch series) and move the option parsing out of the old function which will now be renamed to __ext4_fill_super() and __ext4_remount(). There is a small complication in the fact that while the mount option parsing is going to happen before we get to __ext4_fill_super(), the mount options stored in the super block itself needs to be applied first, before the user specified mount options. So with this patch we're going through the following sequence: - parse user provided options (including sb block) - initialize sbi and store s_sb_block if provided - in __ext4_fill_super() - read the super block - parse and apply options specified in s_mount_opts - check and apply user provided options stored in ctx - continue with the regular ext4_fill_super operation It's not exactly the most elegant solution, but if we still want to support s_mount_opts we have to do it in this order. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Link: https://lore.kernel.org/r/20211027141857.33657-10-lczerner@redhat.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2021-10-27 14:18:53 +00:00
if (test_opt(sb, DATA_FLAGS) == EXT4_MOUNT_JOURNAL_DATA)
descr = " journalled data mode";
else if (test_opt(sb, DATA_FLAGS) == EXT4_MOUNT_ORDERED_DATA)
descr = " ordered data mode";
else
descr = " writeback data mode";
} else
descr = "out journal";
if (___ratelimit(&ext4_mount_msg_ratelimit, "EXT4-fs mount"))
ext4_msg(sb, KERN_INFO, "mounted filesystem %pU %s with%s. "
"Quota mode: %s.", &sb->s_uuid,
sb_rdonly(sb) ? "ro" : "r/w", descr,
ext4_quota_mode(sb));
/* Update the s_overhead_clusters if necessary */
ext4_update_overhead(sb, false);
ext4: Completely separate options parsing and sb setup The new mount api separates option parsing and super block setup into two distinct steps and so we need to separate the options parsing out of the ext4_fill_super() and ext4_remount(). In order to achieve this we have to create new ext4_fill_super() and ext4_remount() functions which will serve its purpose only until we actually do convert to the new api (as such they are only temporary for this patch series) and move the option parsing out of the old function which will now be renamed to __ext4_fill_super() and __ext4_remount(). There is a small complication in the fact that while the mount option parsing is going to happen before we get to __ext4_fill_super(), the mount options stored in the super block itself needs to be applied first, before the user specified mount options. So with this patch we're going through the following sequence: - parse user provided options (including sb block) - initialize sbi and store s_sb_block if provided - in __ext4_fill_super() - read the super block - parse and apply options specified in s_mount_opts - check and apply user provided options stored in ctx - continue with the regular ext4_fill_super operation It's not exactly the most elegant solution, but if we still want to support s_mount_opts we have to do it in this order. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Link: https://lore.kernel.org/r/20211027141857.33657-10-lczerner@redhat.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2021-10-27 14:18:53 +00:00
return 0;
ext4: Completely separate options parsing and sb setup The new mount api separates option parsing and super block setup into two distinct steps and so we need to separate the options parsing out of the ext4_fill_super() and ext4_remount(). In order to achieve this we have to create new ext4_fill_super() and ext4_remount() functions which will serve its purpose only until we actually do convert to the new api (as such they are only temporary for this patch series) and move the option parsing out of the old function which will now be renamed to __ext4_fill_super() and __ext4_remount(). There is a small complication in the fact that while the mount option parsing is going to happen before we get to __ext4_fill_super(), the mount options stored in the super block itself needs to be applied first, before the user specified mount options. So with this patch we're going through the following sequence: - parse user provided options (including sb block) - initialize sbi and store s_sb_block if provided - in __ext4_fill_super() - read the super block - parse and apply options specified in s_mount_opts - check and apply user provided options stored in ctx - continue with the regular ext4_fill_super operation It's not exactly the most elegant solution, but if we still want to support s_mount_opts we have to do it in this order. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Link: https://lore.kernel.org/r/20211027141857.33657-10-lczerner@redhat.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2021-10-27 14:18:53 +00:00
free_sbi:
ext4_free_sbi(sbi);
fc->s_fs_info = NULL;
ext4: Completely separate options parsing and sb setup The new mount api separates option parsing and super block setup into two distinct steps and so we need to separate the options parsing out of the ext4_fill_super() and ext4_remount(). In order to achieve this we have to create new ext4_fill_super() and ext4_remount() functions which will serve its purpose only until we actually do convert to the new api (as such they are only temporary for this patch series) and move the option parsing out of the old function which will now be renamed to __ext4_fill_super() and __ext4_remount(). There is a small complication in the fact that while the mount option parsing is going to happen before we get to __ext4_fill_super(), the mount options stored in the super block itself needs to be applied first, before the user specified mount options. So with this patch we're going through the following sequence: - parse user provided options (including sb block) - initialize sbi and store s_sb_block if provided - in __ext4_fill_super() - read the super block - parse and apply options specified in s_mount_opts - check and apply user provided options stored in ctx - continue with the regular ext4_fill_super operation It's not exactly the most elegant solution, but if we still want to support s_mount_opts we have to do it in this order. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Link: https://lore.kernel.org/r/20211027141857.33657-10-lczerner@redhat.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2021-10-27 14:18:53 +00:00
return ret;
}
static int ext4_get_tree(struct fs_context *fc)
{
return get_tree_bdev(fc, ext4_fill_super);
}
/*
* Setup any per-fs journal parameters now. We'll do this both on
* initial mount, once the journal has been initialised but before we've
* done any recovery; and again on any subsequent remount.
*/
static void ext4_init_journal_params(struct super_block *sb, journal_t *journal)
{
struct ext4_sb_info *sbi = EXT4_SB(sb);
journal->j_commit_interval = sbi->s_commit_interval;
journal->j_min_batch_time = sbi->s_min_batch_time;
journal->j_max_batch_time = sbi->s_max_batch_time;
ext4_fc_init(sb, journal);
write_lock(&journal->j_state_lock);
if (test_opt(sb, BARRIER))
journal->j_flags |= JBD2_BARRIER;
else
journal->j_flags &= ~JBD2_BARRIER;
if (test_opt(sb, DATA_ERR_ABORT))
journal->j_flags |= JBD2_ABORT_ON_SYNCDATA_ERR;
else
journal->j_flags &= ~JBD2_ABORT_ON_SYNCDATA_ERR;
/*
* Always enable journal cycle record option, letting the journal
* records log transactions continuously between each mount.
*/
journal->j_flags |= JBD2_CYCLE_RECORD;
write_unlock(&journal->j_state_lock);
}
static struct inode *ext4_get_journal_inode(struct super_block *sb,
unsigned int journal_inum)
{
struct inode *journal_inode;
/*
* Test for the existence of a valid inode on disk. Bad things
* happen if we iget() an unused inode, as the subsequent iput()
* will try to delete it.
*/
journal_inode = ext4_iget(sb, journal_inum, EXT4_IGET_SPECIAL);
if (IS_ERR(journal_inode)) {
ext4_msg(sb, KERN_ERR, "no journal found");
return ERR_CAST(journal_inode);
}
if (!journal_inode->i_nlink) {
make_bad_inode(journal_inode);
iput(journal_inode);
ext4_msg(sb, KERN_ERR, "journal inode is deleted");
return ERR_PTR(-EFSCORRUPTED);
}
ext4: don't allow journal inode to have encrypt flag Mounting a filesystem whose journal inode has the encrypt flag causes a NULL dereference in fscrypt_limit_io_blocks() when the 'inlinecrypt' mount option is used. The problem is that when jbd2_journal_init_inode() calls bmap(), it eventually finds its way into ext4_iomap_begin(), which calls fscrypt_limit_io_blocks(). fscrypt_limit_io_blocks() requires that if the inode is encrypted, then its encryption key must already be set up. That's not the case here, since the journal inode is never "opened" like a normal file would be. Hence the crash. A reproducer is: mkfs.ext4 -F /dev/vdb debugfs -w /dev/vdb -R "set_inode_field <8> flags 0x80808" mount /dev/vdb /mnt -o inlinecrypt To fix this, make ext4 consider journal inodes with the encrypt flag to be invalid. (Note, maybe other flags should be rejected on the journal inode too. For now, this is just the minimal fix for the above issue.) I've marked this as fixing the commit that introduced the call to fscrypt_limit_io_blocks(), since that's what made an actual crash start being possible. But this fix could be applied to any version of ext4 that supports the encrypt feature. Reported-by: syzbot+ba9dac45bc76c490b7c3@syzkaller.appspotmail.com Fixes: 38ea50daa7a4 ("ext4: support direct I/O with fscrypt using blk-crypto") Cc: stable@vger.kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com> Link: https://lore.kernel.org/r/20221102053312.189962-1-ebiggers@kernel.org Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org
2022-11-02 05:33:12 +00:00
if (!S_ISREG(journal_inode->i_mode) || IS_ENCRYPTED(journal_inode)) {
ext4_msg(sb, KERN_ERR, "invalid journal inode");
iput(journal_inode);
return ERR_PTR(-EFSCORRUPTED);
}
ext4_debug("Journal inode found at %p: %lld bytes\n",
journal_inode, journal_inode->i_size);
return journal_inode;
}
static int ext4_journal_bmap(journal_t *journal, sector_t *block)
{
struct ext4_map_blocks map;
int ret;
if (journal->j_inode == NULL)
return 0;
map.m_lblk = *block;
map.m_len = 1;
ret = ext4_map_blocks(NULL, journal->j_inode, &map, 0);
if (ret <= 0) {
ext4_msg(journal->j_inode->i_sb, KERN_CRIT,
"journal bmap failed: block %llu ret %d\n",
*block, ret);
jbd2_journal_abort(journal, ret ? ret : -EIO);
return ret;
}
*block = map.m_pblk;
return 0;
}
static journal_t *ext4_open_inode_journal(struct super_block *sb,
unsigned int journal_inum)
{
struct inode *journal_inode;
journal_t *journal;
journal_inode = ext4_get_journal_inode(sb, journal_inum);
if (IS_ERR(journal_inode))
return ERR_CAST(journal_inode);
journal = jbd2_journal_init_inode(journal_inode);
if (IS_ERR(journal)) {
ext4_msg(sb, KERN_ERR, "Could not load journal inode");
iput(journal_inode);
return ERR_CAST(journal);
}
journal->j_private = sb;
journal->j_bmap = ext4_journal_bmap;
ext4_init_journal_params(sb, journal);
return journal;
}
static struct file *ext4_get_journal_blkdev(struct super_block *sb,
dev_t j_dev, ext4_fsblk_t *j_start,
ext4_fsblk_t *j_len)
{
struct buffer_head *bh;
struct block_device *bdev;
struct file *bdev_file;
int hblock, blocksize;
ext4_fsblk_t sb_block;
unsigned long offset;
struct ext4_super_block *es;
int errno;
bdev_file = bdev_file_open_by_dev(j_dev,
BLK_OPEN_READ | BLK_OPEN_WRITE | BLK_OPEN_RESTRICT_WRITES,
sb, &fs_holder_ops);
if (IS_ERR(bdev_file)) {
ext4_msg(sb, KERN_ERR,
"failed to open journal device unknown-block(%u,%u) %ld",
MAJOR(j_dev), MINOR(j_dev), PTR_ERR(bdev_file));
return bdev_file;
}
bdev = file_bdev(bdev_file);
blocksize = sb->s_blocksize;
hblock = bdev_logical_block_size(bdev);
if (blocksize < hblock) {
ext4_msg(sb, KERN_ERR,
"blocksize too small for journal device");
errno = -EINVAL;
goto out_bdev;
}
sb_block = EXT4_MIN_BLOCK_SIZE / blocksize;
offset = EXT4_MIN_BLOCK_SIZE % blocksize;
set_blocksize(bdev, blocksize);
bh = __bread(bdev, sb_block, blocksize);
if (!bh) {
ext4_msg(sb, KERN_ERR, "couldn't read superblock of "
"external journal");
errno = -EINVAL;
goto out_bdev;
}
es = (struct ext4_super_block *) (bh->b_data + offset);
if ((le16_to_cpu(es->s_magic) != EXT4_SUPER_MAGIC) ||
!(le32_to_cpu(es->s_feature_incompat) &
EXT4_FEATURE_INCOMPAT_JOURNAL_DEV)) {
ext4_msg(sb, KERN_ERR, "external journal has bad superblock");
errno = -EFSCORRUPTED;
goto out_bh;
}
if ((le32_to_cpu(es->s_feature_ro_compat) &
EXT4_FEATURE_RO_COMPAT_METADATA_CSUM) &&
es->s_checksum != ext4_superblock_csum(sb, es)) {
ext4_msg(sb, KERN_ERR, "external journal has corrupt superblock");
errno = -EFSCORRUPTED;
goto out_bh;
}
if (memcmp(EXT4_SB(sb)->s_es->s_journal_uuid, es->s_uuid, 16)) {
ext4_msg(sb, KERN_ERR, "journal UUID does not match");
errno = -EFSCORRUPTED;
goto out_bh;
}
*j_start = sb_block + 1;
*j_len = ext4_blocks_count(es);
brelse(bh);
return bdev_file;
out_bh:
brelse(bh);
out_bdev:
bdev_fput(bdev_file);
return ERR_PTR(errno);
}
static journal_t *ext4_open_dev_journal(struct super_block *sb,
dev_t j_dev)
{
journal_t *journal;
ext4_fsblk_t j_start;
ext4_fsblk_t j_len;
struct file *bdev_file;
int errno = 0;
bdev_file = ext4_get_journal_blkdev(sb, j_dev, &j_start, &j_len);
if (IS_ERR(bdev_file))
return ERR_CAST(bdev_file);
journal = jbd2_journal_init_dev(file_bdev(bdev_file), sb->s_bdev, j_start,
j_len, sb->s_blocksize);
if (IS_ERR(journal)) {
ext4_msg(sb, KERN_ERR, "failed to create device journal");
errno = PTR_ERR(journal);
goto out_bdev;
}
if (be32_to_cpu(journal->j_superblock->s_nr_users) != 1) {
ext4_msg(sb, KERN_ERR, "External journal has more than one "
"user (unsupported) - %d",
be32_to_cpu(journal->j_superblock->s_nr_users));
errno = -EINVAL;
goto out_journal;
}
journal->j_private = sb;
EXT4_SB(sb)->s_journal_bdev_file = bdev_file;
ext4_init_journal_params(sb, journal);
return journal;
out_journal:
jbd2_journal_destroy(journal);
out_bdev:
bdev_fput(bdev_file);
return ERR_PTR(errno);
}
static int ext4_load_journal(struct super_block *sb,
struct ext4_super_block *es,
unsigned long journal_devnum)
{
journal_t *journal;
unsigned int journal_inum = le32_to_cpu(es->s_journal_inum);
dev_t journal_dev;
int err = 0;
int really_read_only;
ext4: handle read only external journal device Ext4 uses blkdev_get_by_dev() to get the block_device for journal device which does check to see if the read-only block device was opened read-only. As a result ext4 will hapily proceed mounting the file system with external journal on read-only device. This is bad as we would not be able to use the journal leading to errors later on. Instead of simply failing to mount file system in this case, treat it in a similar way we treat internal journal on read-only device. Allow to mount with -o noload in read-only mode. This can be reproduced easily like this: mke2fs -F -O journal_dev $JOURNAL_DEV 100M mkfs.$FSTYPE -F -J device=$JOURNAL_DEV $FS_DEV blockdev --setro $JOURNAL_DEV mount $FS_DEV $MNT touch $MNT/file umount $MNT leading to error like this [ 1307.318713] ------------[ cut here ]------------ [ 1307.323362] generic_make_request: Trying to write to read-only block-device dm-2 (partno 0) [ 1307.331741] WARNING: CPU: 36 PID: 3224 at block/blk-core.c:855 generic_make_request_checks+0x2c3/0x580 [ 1307.341041] Modules linked in: ext4 mbcache jbd2 rfkill intel_rapl_msr intel_rapl_common isst_if_commd [ 1307.419445] CPU: 36 PID: 3224 Comm: jbd2/dm-2 Tainted: G W I 5.8.0-rc5 #2 [ 1307.427359] Hardware name: Dell Inc. PowerEdge R740/01KPX8, BIOS 2.3.10 08/15/2019 [ 1307.434932] RIP: 0010:generic_make_request_checks+0x2c3/0x580 [ 1307.440676] Code: 94 03 00 00 48 89 df 48 8d 74 24 08 c6 05 cf 2b 18 01 01 e8 7f a4 ff ff 48 c7 c7 50e [ 1307.459420] RSP: 0018:ffffc0d70eb5fb48 EFLAGS: 00010286 [ 1307.464646] RAX: 0000000000000000 RBX: ffff9b33b2978300 RCX: 0000000000000000 [ 1307.471780] RDX: ffff9b33e12a81e0 RSI: ffff9b33e1298000 RDI: ffff9b33e1298000 [ 1307.478913] RBP: ffff9b7b9679e0c0 R08: 0000000000000837 R09: 0000000000000024 [ 1307.486044] R10: 0000000000000000 R11: ffffc0d70eb5f9f0 R12: 0000000000000400 [ 1307.493177] R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000000 [ 1307.500308] FS: 0000000000000000(0000) GS:ffff9b33e1280000(0000) knlGS:0000000000000000 [ 1307.508396] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1307.514142] CR2: 000055eaf4109000 CR3: 0000003dee40a006 CR4: 00000000007606e0 [ 1307.521273] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1307.528407] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 1307.535538] PKRU: 55555554 [ 1307.538250] Call Trace: [ 1307.540708] generic_make_request+0x30/0x340 [ 1307.544985] submit_bio+0x43/0x190 [ 1307.548393] ? bio_add_page+0x62/0x90 [ 1307.552068] submit_bh_wbc+0x16a/0x190 [ 1307.555833] jbd2_write_superblock+0xec/0x200 [jbd2] [ 1307.560803] jbd2_journal_update_sb_log_tail+0x65/0xc0 [jbd2] [ 1307.566557] jbd2_journal_commit_transaction+0x2ae/0x1860 [jbd2] [ 1307.572566] ? check_preempt_curr+0x7a/0x90 [ 1307.576756] ? update_curr+0xe1/0x1d0 [ 1307.580421] ? account_entity_dequeue+0x7b/0xb0 [ 1307.584955] ? newidle_balance+0x231/0x3d0 [ 1307.589056] ? __switch_to_asm+0x42/0x70 [ 1307.592986] ? __switch_to_asm+0x36/0x70 [ 1307.596918] ? lock_timer_base+0x67/0x80 [ 1307.600851] kjournald2+0xbd/0x270 [jbd2] [ 1307.604873] ? finish_wait+0x80/0x80 [ 1307.608460] ? commit_timeout+0x10/0x10 [jbd2] [ 1307.612915] kthread+0x114/0x130 [ 1307.616152] ? kthread_park+0x80/0x80 [ 1307.619816] ret_from_fork+0x22/0x30 [ 1307.623400] ---[ end trace 27490236265b1630 ]--- Signed-off-by: Lukas Czerner <lczerner@redhat.com> Reviewed-by: Andreas Dilger <adilger@dilger.ca> Link: https://lore.kernel.org/r/20200717090605.2612-1-lczerner@redhat.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-07-17 09:06:05 +00:00
int journal_dev_ro;
if (WARN_ON_ONCE(!ext4_has_feature_journal(sb)))
return -EFSCORRUPTED;
if (journal_devnum &&
journal_devnum != le32_to_cpu(es->s_journal_dev)) {
ext4_msg(sb, KERN_INFO, "external journal device major/minor "
"numbers have changed");
journal_dev = new_decode_dev(journal_devnum);
} else
journal_dev = new_decode_dev(le32_to_cpu(es->s_journal_dev));
ext4: handle read only external journal device Ext4 uses blkdev_get_by_dev() to get the block_device for journal device which does check to see if the read-only block device was opened read-only. As a result ext4 will hapily proceed mounting the file system with external journal on read-only device. This is bad as we would not be able to use the journal leading to errors later on. Instead of simply failing to mount file system in this case, treat it in a similar way we treat internal journal on read-only device. Allow to mount with -o noload in read-only mode. This can be reproduced easily like this: mke2fs -F -O journal_dev $JOURNAL_DEV 100M mkfs.$FSTYPE -F -J device=$JOURNAL_DEV $FS_DEV blockdev --setro $JOURNAL_DEV mount $FS_DEV $MNT touch $MNT/file umount $MNT leading to error like this [ 1307.318713] ------------[ cut here ]------------ [ 1307.323362] generic_make_request: Trying to write to read-only block-device dm-2 (partno 0) [ 1307.331741] WARNING: CPU: 36 PID: 3224 at block/blk-core.c:855 generic_make_request_checks+0x2c3/0x580 [ 1307.341041] Modules linked in: ext4 mbcache jbd2 rfkill intel_rapl_msr intel_rapl_common isst_if_commd [ 1307.419445] CPU: 36 PID: 3224 Comm: jbd2/dm-2 Tainted: G W I 5.8.0-rc5 #2 [ 1307.427359] Hardware name: Dell Inc. PowerEdge R740/01KPX8, BIOS 2.3.10 08/15/2019 [ 1307.434932] RIP: 0010:generic_make_request_checks+0x2c3/0x580 [ 1307.440676] Code: 94 03 00 00 48 89 df 48 8d 74 24 08 c6 05 cf 2b 18 01 01 e8 7f a4 ff ff 48 c7 c7 50e [ 1307.459420] RSP: 0018:ffffc0d70eb5fb48 EFLAGS: 00010286 [ 1307.464646] RAX: 0000000000000000 RBX: ffff9b33b2978300 RCX: 0000000000000000 [ 1307.471780] RDX: ffff9b33e12a81e0 RSI: ffff9b33e1298000 RDI: ffff9b33e1298000 [ 1307.478913] RBP: ffff9b7b9679e0c0 R08: 0000000000000837 R09: 0000000000000024 [ 1307.486044] R10: 0000000000000000 R11: ffffc0d70eb5f9f0 R12: 0000000000000400 [ 1307.493177] R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000000 [ 1307.500308] FS: 0000000000000000(0000) GS:ffff9b33e1280000(0000) knlGS:0000000000000000 [ 1307.508396] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1307.514142] CR2: 000055eaf4109000 CR3: 0000003dee40a006 CR4: 00000000007606e0 [ 1307.521273] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1307.528407] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 1307.535538] PKRU: 55555554 [ 1307.538250] Call Trace: [ 1307.540708] generic_make_request+0x30/0x340 [ 1307.544985] submit_bio+0x43/0x190 [ 1307.548393] ? bio_add_page+0x62/0x90 [ 1307.552068] submit_bh_wbc+0x16a/0x190 [ 1307.555833] jbd2_write_superblock+0xec/0x200 [jbd2] [ 1307.560803] jbd2_journal_update_sb_log_tail+0x65/0xc0 [jbd2] [ 1307.566557] jbd2_journal_commit_transaction+0x2ae/0x1860 [jbd2] [ 1307.572566] ? check_preempt_curr+0x7a/0x90 [ 1307.576756] ? update_curr+0xe1/0x1d0 [ 1307.580421] ? account_entity_dequeue+0x7b/0xb0 [ 1307.584955] ? newidle_balance+0x231/0x3d0 [ 1307.589056] ? __switch_to_asm+0x42/0x70 [ 1307.592986] ? __switch_to_asm+0x36/0x70 [ 1307.596918] ? lock_timer_base+0x67/0x80 [ 1307.600851] kjournald2+0xbd/0x270 [jbd2] [ 1307.604873] ? finish_wait+0x80/0x80 [ 1307.608460] ? commit_timeout+0x10/0x10 [jbd2] [ 1307.612915] kthread+0x114/0x130 [ 1307.616152] ? kthread_park+0x80/0x80 [ 1307.619816] ret_from_fork+0x22/0x30 [ 1307.623400] ---[ end trace 27490236265b1630 ]--- Signed-off-by: Lukas Czerner <lczerner@redhat.com> Reviewed-by: Andreas Dilger <adilger@dilger.ca> Link: https://lore.kernel.org/r/20200717090605.2612-1-lczerner@redhat.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-07-17 09:06:05 +00:00
if (journal_inum && journal_dev) {
ext4_msg(sb, KERN_ERR,
"filesystem has both journal inode and journal device!");
return -EINVAL;
}
if (journal_inum) {
journal = ext4_open_inode_journal(sb, journal_inum);
if (IS_ERR(journal))
return PTR_ERR(journal);
ext4: handle read only external journal device Ext4 uses blkdev_get_by_dev() to get the block_device for journal device which does check to see if the read-only block device was opened read-only. As a result ext4 will hapily proceed mounting the file system with external journal on read-only device. This is bad as we would not be able to use the journal leading to errors later on. Instead of simply failing to mount file system in this case, treat it in a similar way we treat internal journal on read-only device. Allow to mount with -o noload in read-only mode. This can be reproduced easily like this: mke2fs -F -O journal_dev $JOURNAL_DEV 100M mkfs.$FSTYPE -F -J device=$JOURNAL_DEV $FS_DEV blockdev --setro $JOURNAL_DEV mount $FS_DEV $MNT touch $MNT/file umount $MNT leading to error like this [ 1307.318713] ------------[ cut here ]------------ [ 1307.323362] generic_make_request: Trying to write to read-only block-device dm-2 (partno 0) [ 1307.331741] WARNING: CPU: 36 PID: 3224 at block/blk-core.c:855 generic_make_request_checks+0x2c3/0x580 [ 1307.341041] Modules linked in: ext4 mbcache jbd2 rfkill intel_rapl_msr intel_rapl_common isst_if_commd [ 1307.419445] CPU: 36 PID: 3224 Comm: jbd2/dm-2 Tainted: G W I 5.8.0-rc5 #2 [ 1307.427359] Hardware name: Dell Inc. PowerEdge R740/01KPX8, BIOS 2.3.10 08/15/2019 [ 1307.434932] RIP: 0010:generic_make_request_checks+0x2c3/0x580 [ 1307.440676] Code: 94 03 00 00 48 89 df 48 8d 74 24 08 c6 05 cf 2b 18 01 01 e8 7f a4 ff ff 48 c7 c7 50e [ 1307.459420] RSP: 0018:ffffc0d70eb5fb48 EFLAGS: 00010286 [ 1307.464646] RAX: 0000000000000000 RBX: ffff9b33b2978300 RCX: 0000000000000000 [ 1307.471780] RDX: ffff9b33e12a81e0 RSI: ffff9b33e1298000 RDI: ffff9b33e1298000 [ 1307.478913] RBP: ffff9b7b9679e0c0 R08: 0000000000000837 R09: 0000000000000024 [ 1307.486044] R10: 0000000000000000 R11: ffffc0d70eb5f9f0 R12: 0000000000000400 [ 1307.493177] R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000000 [ 1307.500308] FS: 0000000000000000(0000) GS:ffff9b33e1280000(0000) knlGS:0000000000000000 [ 1307.508396] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1307.514142] CR2: 000055eaf4109000 CR3: 0000003dee40a006 CR4: 00000000007606e0 [ 1307.521273] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1307.528407] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 1307.535538] PKRU: 55555554 [ 1307.538250] Call Trace: [ 1307.540708] generic_make_request+0x30/0x340 [ 1307.544985] submit_bio+0x43/0x190 [ 1307.548393] ? bio_add_page+0x62/0x90 [ 1307.552068] submit_bh_wbc+0x16a/0x190 [ 1307.555833] jbd2_write_superblock+0xec/0x200 [jbd2] [ 1307.560803] jbd2_journal_update_sb_log_tail+0x65/0xc0 [jbd2] [ 1307.566557] jbd2_journal_commit_transaction+0x2ae/0x1860 [jbd2] [ 1307.572566] ? check_preempt_curr+0x7a/0x90 [ 1307.576756] ? update_curr+0xe1/0x1d0 [ 1307.580421] ? account_entity_dequeue+0x7b/0xb0 [ 1307.584955] ? newidle_balance+0x231/0x3d0 [ 1307.589056] ? __switch_to_asm+0x42/0x70 [ 1307.592986] ? __switch_to_asm+0x36/0x70 [ 1307.596918] ? lock_timer_base+0x67/0x80 [ 1307.600851] kjournald2+0xbd/0x270 [jbd2] [ 1307.604873] ? finish_wait+0x80/0x80 [ 1307.608460] ? commit_timeout+0x10/0x10 [jbd2] [ 1307.612915] kthread+0x114/0x130 [ 1307.616152] ? kthread_park+0x80/0x80 [ 1307.619816] ret_from_fork+0x22/0x30 [ 1307.623400] ---[ end trace 27490236265b1630 ]--- Signed-off-by: Lukas Czerner <lczerner@redhat.com> Reviewed-by: Andreas Dilger <adilger@dilger.ca> Link: https://lore.kernel.org/r/20200717090605.2612-1-lczerner@redhat.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-07-17 09:06:05 +00:00
} else {
journal = ext4_open_dev_journal(sb, journal_dev);
if (IS_ERR(journal))
return PTR_ERR(journal);
ext4: handle read only external journal device Ext4 uses blkdev_get_by_dev() to get the block_device for journal device which does check to see if the read-only block device was opened read-only. As a result ext4 will hapily proceed mounting the file system with external journal on read-only device. This is bad as we would not be able to use the journal leading to errors later on. Instead of simply failing to mount file system in this case, treat it in a similar way we treat internal journal on read-only device. Allow to mount with -o noload in read-only mode. This can be reproduced easily like this: mke2fs -F -O journal_dev $JOURNAL_DEV 100M mkfs.$FSTYPE -F -J device=$JOURNAL_DEV $FS_DEV blockdev --setro $JOURNAL_DEV mount $FS_DEV $MNT touch $MNT/file umount $MNT leading to error like this [ 1307.318713] ------------[ cut here ]------------ [ 1307.323362] generic_make_request: Trying to write to read-only block-device dm-2 (partno 0) [ 1307.331741] WARNING: CPU: 36 PID: 3224 at block/blk-core.c:855 generic_make_request_checks+0x2c3/0x580 [ 1307.341041] Modules linked in: ext4 mbcache jbd2 rfkill intel_rapl_msr intel_rapl_common isst_if_commd [ 1307.419445] CPU: 36 PID: 3224 Comm: jbd2/dm-2 Tainted: G W I 5.8.0-rc5 #2 [ 1307.427359] Hardware name: Dell Inc. PowerEdge R740/01KPX8, BIOS 2.3.10 08/15/2019 [ 1307.434932] RIP: 0010:generic_make_request_checks+0x2c3/0x580 [ 1307.440676] Code: 94 03 00 00 48 89 df 48 8d 74 24 08 c6 05 cf 2b 18 01 01 e8 7f a4 ff ff 48 c7 c7 50e [ 1307.459420] RSP: 0018:ffffc0d70eb5fb48 EFLAGS: 00010286 [ 1307.464646] RAX: 0000000000000000 RBX: ffff9b33b2978300 RCX: 0000000000000000 [ 1307.471780] RDX: ffff9b33e12a81e0 RSI: ffff9b33e1298000 RDI: ffff9b33e1298000 [ 1307.478913] RBP: ffff9b7b9679e0c0 R08: 0000000000000837 R09: 0000000000000024 [ 1307.486044] R10: 0000000000000000 R11: ffffc0d70eb5f9f0 R12: 0000000000000400 [ 1307.493177] R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000000 [ 1307.500308] FS: 0000000000000000(0000) GS:ffff9b33e1280000(0000) knlGS:0000000000000000 [ 1307.508396] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1307.514142] CR2: 000055eaf4109000 CR3: 0000003dee40a006 CR4: 00000000007606e0 [ 1307.521273] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1307.528407] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 1307.535538] PKRU: 55555554 [ 1307.538250] Call Trace: [ 1307.540708] generic_make_request+0x30/0x340 [ 1307.544985] submit_bio+0x43/0x190 [ 1307.548393] ? bio_add_page+0x62/0x90 [ 1307.552068] submit_bh_wbc+0x16a/0x190 [ 1307.555833] jbd2_write_superblock+0xec/0x200 [jbd2] [ 1307.560803] jbd2_journal_update_sb_log_tail+0x65/0xc0 [jbd2] [ 1307.566557] jbd2_journal_commit_transaction+0x2ae/0x1860 [jbd2] [ 1307.572566] ? check_preempt_curr+0x7a/0x90 [ 1307.576756] ? update_curr+0xe1/0x1d0 [ 1307.580421] ? account_entity_dequeue+0x7b/0xb0 [ 1307.584955] ? newidle_balance+0x231/0x3d0 [ 1307.589056] ? __switch_to_asm+0x42/0x70 [ 1307.592986] ? __switch_to_asm+0x36/0x70 [ 1307.596918] ? lock_timer_base+0x67/0x80 [ 1307.600851] kjournald2+0xbd/0x270 [jbd2] [ 1307.604873] ? finish_wait+0x80/0x80 [ 1307.608460] ? commit_timeout+0x10/0x10 [jbd2] [ 1307.612915] kthread+0x114/0x130 [ 1307.616152] ? kthread_park+0x80/0x80 [ 1307.619816] ret_from_fork+0x22/0x30 [ 1307.623400] ---[ end trace 27490236265b1630 ]--- Signed-off-by: Lukas Czerner <lczerner@redhat.com> Reviewed-by: Andreas Dilger <adilger@dilger.ca> Link: https://lore.kernel.org/r/20200717090605.2612-1-lczerner@redhat.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-07-17 09:06:05 +00:00
}
journal_dev_ro = bdev_read_only(journal->j_dev);
really_read_only = bdev_read_only(sb->s_bdev) | journal_dev_ro;
if (journal_dev_ro && !sb_rdonly(sb)) {
ext4_msg(sb, KERN_ERR,
"journal device read-only, try mounting with '-o ro'");
err = -EROFS;
goto err_out;
}
/*
* Are we loading a blank journal or performing recovery after a
* crash? For recovery, we need to check in advance whether we
* can get read-write access to the device.
*/
if (ext4_has_feature_journal_needs_recovery(sb)) {
if (sb_rdonly(sb)) {
ext4_msg(sb, KERN_INFO, "INFO: recovery "
"required on readonly filesystem");
if (really_read_only) {
ext4_msg(sb, KERN_ERR, "write access "
"unavailable, cannot proceed "
"(try mounting with noload)");
ext4: handle read only external journal device Ext4 uses blkdev_get_by_dev() to get the block_device for journal device which does check to see if the read-only block device was opened read-only. As a result ext4 will hapily proceed mounting the file system with external journal on read-only device. This is bad as we would not be able to use the journal leading to errors later on. Instead of simply failing to mount file system in this case, treat it in a similar way we treat internal journal on read-only device. Allow to mount with -o noload in read-only mode. This can be reproduced easily like this: mke2fs -F -O journal_dev $JOURNAL_DEV 100M mkfs.$FSTYPE -F -J device=$JOURNAL_DEV $FS_DEV blockdev --setro $JOURNAL_DEV mount $FS_DEV $MNT touch $MNT/file umount $MNT leading to error like this [ 1307.318713] ------------[ cut here ]------------ [ 1307.323362] generic_make_request: Trying to write to read-only block-device dm-2 (partno 0) [ 1307.331741] WARNING: CPU: 36 PID: 3224 at block/blk-core.c:855 generic_make_request_checks+0x2c3/0x580 [ 1307.341041] Modules linked in: ext4 mbcache jbd2 rfkill intel_rapl_msr intel_rapl_common isst_if_commd [ 1307.419445] CPU: 36 PID: 3224 Comm: jbd2/dm-2 Tainted: G W I 5.8.0-rc5 #2 [ 1307.427359] Hardware name: Dell Inc. PowerEdge R740/01KPX8, BIOS 2.3.10 08/15/2019 [ 1307.434932] RIP: 0010:generic_make_request_checks+0x2c3/0x580 [ 1307.440676] Code: 94 03 00 00 48 89 df 48 8d 74 24 08 c6 05 cf 2b 18 01 01 e8 7f a4 ff ff 48 c7 c7 50e [ 1307.459420] RSP: 0018:ffffc0d70eb5fb48 EFLAGS: 00010286 [ 1307.464646] RAX: 0000000000000000 RBX: ffff9b33b2978300 RCX: 0000000000000000 [ 1307.471780] RDX: ffff9b33e12a81e0 RSI: ffff9b33e1298000 RDI: ffff9b33e1298000 [ 1307.478913] RBP: ffff9b7b9679e0c0 R08: 0000000000000837 R09: 0000000000000024 [ 1307.486044] R10: 0000000000000000 R11: ffffc0d70eb5f9f0 R12: 0000000000000400 [ 1307.493177] R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000000 [ 1307.500308] FS: 0000000000000000(0000) GS:ffff9b33e1280000(0000) knlGS:0000000000000000 [ 1307.508396] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1307.514142] CR2: 000055eaf4109000 CR3: 0000003dee40a006 CR4: 00000000007606e0 [ 1307.521273] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1307.528407] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 1307.535538] PKRU: 55555554 [ 1307.538250] Call Trace: [ 1307.540708] generic_make_request+0x30/0x340 [ 1307.544985] submit_bio+0x43/0x190 [ 1307.548393] ? bio_add_page+0x62/0x90 [ 1307.552068] submit_bh_wbc+0x16a/0x190 [ 1307.555833] jbd2_write_superblock+0xec/0x200 [jbd2] [ 1307.560803] jbd2_journal_update_sb_log_tail+0x65/0xc0 [jbd2] [ 1307.566557] jbd2_journal_commit_transaction+0x2ae/0x1860 [jbd2] [ 1307.572566] ? check_preempt_curr+0x7a/0x90 [ 1307.576756] ? update_curr+0xe1/0x1d0 [ 1307.580421] ? account_entity_dequeue+0x7b/0xb0 [ 1307.584955] ? newidle_balance+0x231/0x3d0 [ 1307.589056] ? __switch_to_asm+0x42/0x70 [ 1307.592986] ? __switch_to_asm+0x36/0x70 [ 1307.596918] ? lock_timer_base+0x67/0x80 [ 1307.600851] kjournald2+0xbd/0x270 [jbd2] [ 1307.604873] ? finish_wait+0x80/0x80 [ 1307.608460] ? commit_timeout+0x10/0x10 [jbd2] [ 1307.612915] kthread+0x114/0x130 [ 1307.616152] ? kthread_park+0x80/0x80 [ 1307.619816] ret_from_fork+0x22/0x30 [ 1307.623400] ---[ end trace 27490236265b1630 ]--- Signed-off-by: Lukas Czerner <lczerner@redhat.com> Reviewed-by: Andreas Dilger <adilger@dilger.ca> Link: https://lore.kernel.org/r/20200717090605.2612-1-lczerner@redhat.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-07-17 09:06:05 +00:00
err = -EROFS;
goto err_out;
}
ext4_msg(sb, KERN_INFO, "write access will "
"be enabled during recovery");
}
}
if (!(journal->j_flags & JBD2_BARRIER))
ext4_msg(sb, KERN_INFO, "barriers disabled");
if (!ext4_has_feature_journal_needs_recovery(sb))
err = jbd2_journal_wipe(journal, !really_read_only);
if (!err) {
char *save = kmalloc(EXT4_S_ERR_LEN, GFP_KERNEL);
__le16 orig_state;
bool changed = false;
if (save)
memcpy(save, ((char *) es) +
EXT4_S_ERR_START, EXT4_S_ERR_LEN);
err = jbd2_journal_load(journal);
if (save && memcmp(((char *) es) + EXT4_S_ERR_START,
save, EXT4_S_ERR_LEN)) {
memcpy(((char *) es) + EXT4_S_ERR_START,
save, EXT4_S_ERR_LEN);
changed = true;
}
kfree(save);
orig_state = es->s_state;
es->s_state |= cpu_to_le16(EXT4_SB(sb)->s_mount_state &
EXT4_ERROR_FS);
if (orig_state != es->s_state)
changed = true;
/* Write out restored error information to the superblock */
if (changed && !really_read_only) {
int err2;
err2 = ext4_commit_super(sb);
err = err ? : err2;
}
}
if (err) {
ext4_msg(sb, KERN_ERR, "error loading journal");
ext4: handle read only external journal device Ext4 uses blkdev_get_by_dev() to get the block_device for journal device which does check to see if the read-only block device was opened read-only. As a result ext4 will hapily proceed mounting the file system with external journal on read-only device. This is bad as we would not be able to use the journal leading to errors later on. Instead of simply failing to mount file system in this case, treat it in a similar way we treat internal journal on read-only device. Allow to mount with -o noload in read-only mode. This can be reproduced easily like this: mke2fs -F -O journal_dev $JOURNAL_DEV 100M mkfs.$FSTYPE -F -J device=$JOURNAL_DEV $FS_DEV blockdev --setro $JOURNAL_DEV mount $FS_DEV $MNT touch $MNT/file umount $MNT leading to error like this [ 1307.318713] ------------[ cut here ]------------ [ 1307.323362] generic_make_request: Trying to write to read-only block-device dm-2 (partno 0) [ 1307.331741] WARNING: CPU: 36 PID: 3224 at block/blk-core.c:855 generic_make_request_checks+0x2c3/0x580 [ 1307.341041] Modules linked in: ext4 mbcache jbd2 rfkill intel_rapl_msr intel_rapl_common isst_if_commd [ 1307.419445] CPU: 36 PID: 3224 Comm: jbd2/dm-2 Tainted: G W I 5.8.0-rc5 #2 [ 1307.427359] Hardware name: Dell Inc. PowerEdge R740/01KPX8, BIOS 2.3.10 08/15/2019 [ 1307.434932] RIP: 0010:generic_make_request_checks+0x2c3/0x580 [ 1307.440676] Code: 94 03 00 00 48 89 df 48 8d 74 24 08 c6 05 cf 2b 18 01 01 e8 7f a4 ff ff 48 c7 c7 50e [ 1307.459420] RSP: 0018:ffffc0d70eb5fb48 EFLAGS: 00010286 [ 1307.464646] RAX: 0000000000000000 RBX: ffff9b33b2978300 RCX: 0000000000000000 [ 1307.471780] RDX: ffff9b33e12a81e0 RSI: ffff9b33e1298000 RDI: ffff9b33e1298000 [ 1307.478913] RBP: ffff9b7b9679e0c0 R08: 0000000000000837 R09: 0000000000000024 [ 1307.486044] R10: 0000000000000000 R11: ffffc0d70eb5f9f0 R12: 0000000000000400 [ 1307.493177] R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000000 [ 1307.500308] FS: 0000000000000000(0000) GS:ffff9b33e1280000(0000) knlGS:0000000000000000 [ 1307.508396] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1307.514142] CR2: 000055eaf4109000 CR3: 0000003dee40a006 CR4: 00000000007606e0 [ 1307.521273] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1307.528407] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 1307.535538] PKRU: 55555554 [ 1307.538250] Call Trace: [ 1307.540708] generic_make_request+0x30/0x340 [ 1307.544985] submit_bio+0x43/0x190 [ 1307.548393] ? bio_add_page+0x62/0x90 [ 1307.552068] submit_bh_wbc+0x16a/0x190 [ 1307.555833] jbd2_write_superblock+0xec/0x200 [jbd2] [ 1307.560803] jbd2_journal_update_sb_log_tail+0x65/0xc0 [jbd2] [ 1307.566557] jbd2_journal_commit_transaction+0x2ae/0x1860 [jbd2] [ 1307.572566] ? check_preempt_curr+0x7a/0x90 [ 1307.576756] ? update_curr+0xe1/0x1d0 [ 1307.580421] ? account_entity_dequeue+0x7b/0xb0 [ 1307.584955] ? newidle_balance+0x231/0x3d0 [ 1307.589056] ? __switch_to_asm+0x42/0x70 [ 1307.592986] ? __switch_to_asm+0x36/0x70 [ 1307.596918] ? lock_timer_base+0x67/0x80 [ 1307.600851] kjournald2+0xbd/0x270 [jbd2] [ 1307.604873] ? finish_wait+0x80/0x80 [ 1307.608460] ? commit_timeout+0x10/0x10 [jbd2] [ 1307.612915] kthread+0x114/0x130 [ 1307.616152] ? kthread_park+0x80/0x80 [ 1307.619816] ret_from_fork+0x22/0x30 [ 1307.623400] ---[ end trace 27490236265b1630 ]--- Signed-off-by: Lukas Czerner <lczerner@redhat.com> Reviewed-by: Andreas Dilger <adilger@dilger.ca> Link: https://lore.kernel.org/r/20200717090605.2612-1-lczerner@redhat.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-07-17 09:06:05 +00:00
goto err_out;
}
EXT4_SB(sb)->s_journal = journal;
err = ext4_clear_journal_err(sb, es);
if (err) {
EXT4_SB(sb)->s_journal = NULL;
jbd2_journal_destroy(journal);
return err;
}
if (!really_read_only && journal_devnum &&
journal_devnum != le32_to_cpu(es->s_journal_dev)) {
es->s_journal_dev = cpu_to_le32(journal_devnum);
ext4_commit_super(sb);
}
if (!really_read_only && journal_inum &&
journal_inum != le32_to_cpu(es->s_journal_inum)) {
es->s_journal_inum = cpu_to_le32(journal_inum);
ext4_commit_super(sb);
}
return 0;
ext4: handle read only external journal device Ext4 uses blkdev_get_by_dev() to get the block_device for journal device which does check to see if the read-only block device was opened read-only. As a result ext4 will hapily proceed mounting the file system with external journal on read-only device. This is bad as we would not be able to use the journal leading to errors later on. Instead of simply failing to mount file system in this case, treat it in a similar way we treat internal journal on read-only device. Allow to mount with -o noload in read-only mode. This can be reproduced easily like this: mke2fs -F -O journal_dev $JOURNAL_DEV 100M mkfs.$FSTYPE -F -J device=$JOURNAL_DEV $FS_DEV blockdev --setro $JOURNAL_DEV mount $FS_DEV $MNT touch $MNT/file umount $MNT leading to error like this [ 1307.318713] ------------[ cut here ]------------ [ 1307.323362] generic_make_request: Trying to write to read-only block-device dm-2 (partno 0) [ 1307.331741] WARNING: CPU: 36 PID: 3224 at block/blk-core.c:855 generic_make_request_checks+0x2c3/0x580 [ 1307.341041] Modules linked in: ext4 mbcache jbd2 rfkill intel_rapl_msr intel_rapl_common isst_if_commd [ 1307.419445] CPU: 36 PID: 3224 Comm: jbd2/dm-2 Tainted: G W I 5.8.0-rc5 #2 [ 1307.427359] Hardware name: Dell Inc. PowerEdge R740/01KPX8, BIOS 2.3.10 08/15/2019 [ 1307.434932] RIP: 0010:generic_make_request_checks+0x2c3/0x580 [ 1307.440676] Code: 94 03 00 00 48 89 df 48 8d 74 24 08 c6 05 cf 2b 18 01 01 e8 7f a4 ff ff 48 c7 c7 50e [ 1307.459420] RSP: 0018:ffffc0d70eb5fb48 EFLAGS: 00010286 [ 1307.464646] RAX: 0000000000000000 RBX: ffff9b33b2978300 RCX: 0000000000000000 [ 1307.471780] RDX: ffff9b33e12a81e0 RSI: ffff9b33e1298000 RDI: ffff9b33e1298000 [ 1307.478913] RBP: ffff9b7b9679e0c0 R08: 0000000000000837 R09: 0000000000000024 [ 1307.486044] R10: 0000000000000000 R11: ffffc0d70eb5f9f0 R12: 0000000000000400 [ 1307.493177] R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000000 [ 1307.500308] FS: 0000000000000000(0000) GS:ffff9b33e1280000(0000) knlGS:0000000000000000 [ 1307.508396] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1307.514142] CR2: 000055eaf4109000 CR3: 0000003dee40a006 CR4: 00000000007606e0 [ 1307.521273] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1307.528407] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 1307.535538] PKRU: 55555554 [ 1307.538250] Call Trace: [ 1307.540708] generic_make_request+0x30/0x340 [ 1307.544985] submit_bio+0x43/0x190 [ 1307.548393] ? bio_add_page+0x62/0x90 [ 1307.552068] submit_bh_wbc+0x16a/0x190 [ 1307.555833] jbd2_write_superblock+0xec/0x200 [jbd2] [ 1307.560803] jbd2_journal_update_sb_log_tail+0x65/0xc0 [jbd2] [ 1307.566557] jbd2_journal_commit_transaction+0x2ae/0x1860 [jbd2] [ 1307.572566] ? check_preempt_curr+0x7a/0x90 [ 1307.576756] ? update_curr+0xe1/0x1d0 [ 1307.580421] ? account_entity_dequeue+0x7b/0xb0 [ 1307.584955] ? newidle_balance+0x231/0x3d0 [ 1307.589056] ? __switch_to_asm+0x42/0x70 [ 1307.592986] ? __switch_to_asm+0x36/0x70 [ 1307.596918] ? lock_timer_base+0x67/0x80 [ 1307.600851] kjournald2+0xbd/0x270 [jbd2] [ 1307.604873] ? finish_wait+0x80/0x80 [ 1307.608460] ? commit_timeout+0x10/0x10 [jbd2] [ 1307.612915] kthread+0x114/0x130 [ 1307.616152] ? kthread_park+0x80/0x80 [ 1307.619816] ret_from_fork+0x22/0x30 [ 1307.623400] ---[ end trace 27490236265b1630 ]--- Signed-off-by: Lukas Czerner <lczerner@redhat.com> Reviewed-by: Andreas Dilger <adilger@dilger.ca> Link: https://lore.kernel.org/r/20200717090605.2612-1-lczerner@redhat.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-07-17 09:06:05 +00:00
err_out:
jbd2_journal_destroy(journal);
return err;
}
/* Copy state of EXT4_SB(sb) into buffer for on-disk superblock */
static void ext4_update_super(struct super_block *sb)
{
struct ext4_sb_info *sbi = EXT4_SB(sb);
struct ext4_super_block *es = sbi->s_es;
struct buffer_head *sbh = sbi->s_sbh;
lock_buffer(sbh);
/*
* If the file system is mounted read-only, don't update the
* superblock write time. This avoids updating the superblock
* write time when we are mounting the root file system
* read/only but we need to replay the journal; at that point,
* for people who are east of GMT and who make their clock
* tick in localtime for Windows bug-for-bug compatibility,
* the clock is set in the future, and this will cause e2fsck
* to complain and force a full file system check.
*/
if (!sb_rdonly(sb))
ext4_update_tstamp(es, s_wtime);
es->s_kbytes_written =
A number of bug fixes for ext4: * For the new fast_commit feature * Fix some error handling codepaths in whiteout handling and mountpoint sampling * Fix how we write ext4_error information so it goes through the journal when journalling is active, to avoid races that can lead to lost error information, superblock checksum failures, or DIF/DIX features. -----BEGIN PGP SIGNATURE----- iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmAB8eMACgkQ8vlZVpUN gaMUxAf+MW22dceTto2RO0ox9OEBNoZDFiVnlEuUaIOxkqOlovIWaqX7wwuF/121 +FaNeDVzqNSS/QjQSB5lHF5OfHCD2u1Ef/bGzCm9cQyeN2/n0sCsStfPCcyLHy/0 4R8PsjF0xhhbCETLcAc0U/YBFEoqSn1i7DG5nnpx63Wt1S/SSMmTAXzafWbzisEZ XNsz3CEPCDDSmSzOt3qMMHxkSoOZhYcLe7fCoKkhZ2pvTyrQsHrne6NNLtxc+sDL AcKkaI0EWFiFRhebowQO/5ouq6nnGKLCsukuZN9//Br8ht5gNcFpuKNVFl+LOiM6 ud4H3qcRokcdPPAn3uwI0AJKFXqLvg== =Dgdj -----END PGP SIGNATURE----- Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 fixes from Ted Ts'o: "A number of bug fixes for ext4: - Fix for the new fast_commit feature - Fix some error handling codepaths in whiteout handling and mountpoint sampling - Fix how we write ext4_error information so it goes through the journal when journalling is active, to avoid races that can lead to lost error information, superblock checksum failures, or DIF/DIX features" * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: remove expensive flush on fast commit ext4: fix bug for rename with RENAME_WHITEOUT ext4: fix wrong list_splice in ext4_fc_cleanup ext4: use IS_ERR instead of IS_ERR_OR_NULL and set inode null when IS_ERR ext4: don't leak old mountpoint samples ext4: drop ext4_handle_dirty_super() ext4: fix superblock checksum failure when setting password salt ext4: use sbi instead of EXT4_SB(sb) in ext4_update_super() ext4: save error info to sb through journal if available ext4: protect superblock modifications with a buffer lock ext4: drop sync argument of ext4_commit_super() ext4: combine ext4_handle_error() and save_error_info()
2021-01-15 22:54:24 +00:00
cpu_to_le64(sbi->s_kbytes_written +
((part_stat_read(sb->s_bdev, sectors[STAT_WRITE]) -
A number of bug fixes for ext4: * For the new fast_commit feature * Fix some error handling codepaths in whiteout handling and mountpoint sampling * Fix how we write ext4_error information so it goes through the journal when journalling is active, to avoid races that can lead to lost error information, superblock checksum failures, or DIF/DIX features. -----BEGIN PGP SIGNATURE----- iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmAB8eMACgkQ8vlZVpUN gaMUxAf+MW22dceTto2RO0ox9OEBNoZDFiVnlEuUaIOxkqOlovIWaqX7wwuF/121 +FaNeDVzqNSS/QjQSB5lHF5OfHCD2u1Ef/bGzCm9cQyeN2/n0sCsStfPCcyLHy/0 4R8PsjF0xhhbCETLcAc0U/YBFEoqSn1i7DG5nnpx63Wt1S/SSMmTAXzafWbzisEZ XNsz3CEPCDDSmSzOt3qMMHxkSoOZhYcLe7fCoKkhZ2pvTyrQsHrne6NNLtxc+sDL AcKkaI0EWFiFRhebowQO/5ouq6nnGKLCsukuZN9//Br8ht5gNcFpuKNVFl+LOiM6 ud4H3qcRokcdPPAn3uwI0AJKFXqLvg== =Dgdj -----END PGP SIGNATURE----- Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 fixes from Ted Ts'o: "A number of bug fixes for ext4: - Fix for the new fast_commit feature - Fix some error handling codepaths in whiteout handling and mountpoint sampling - Fix how we write ext4_error information so it goes through the journal when journalling is active, to avoid races that can lead to lost error information, superblock checksum failures, or DIF/DIX features" * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: remove expensive flush on fast commit ext4: fix bug for rename with RENAME_WHITEOUT ext4: fix wrong list_splice in ext4_fc_cleanup ext4: use IS_ERR instead of IS_ERR_OR_NULL and set inode null when IS_ERR ext4: don't leak old mountpoint samples ext4: drop ext4_handle_dirty_super() ext4: fix superblock checksum failure when setting password salt ext4: use sbi instead of EXT4_SB(sb) in ext4_update_super() ext4: save error info to sb through journal if available ext4: protect superblock modifications with a buffer lock ext4: drop sync argument of ext4_commit_super() ext4: combine ext4_handle_error() and save_error_info()
2021-01-15 22:54:24 +00:00
sbi->s_sectors_written_start) >> 1));
if (percpu_counter_initialized(&sbi->s_freeclusters_counter))
ext4_free_blocks_count_set(es,
EXT4_C2B(sbi, percpu_counter_sum_positive(
&sbi->s_freeclusters_counter)));
if (percpu_counter_initialized(&sbi->s_freeinodes_counter))
es->s_free_inodes_count =
cpu_to_le32(percpu_counter_sum_positive(
&sbi->s_freeinodes_counter));
/* Copy error information to the on-disk superblock */
spin_lock(&sbi->s_error_lock);
if (sbi->s_add_error_count > 0) {
es->s_state |= cpu_to_le16(EXT4_ERROR_FS);
if (!es->s_first_error_time && !es->s_first_error_time_hi) {
__ext4_update_tstamp(&es->s_first_error_time,
&es->s_first_error_time_hi,
sbi->s_first_error_time);
ext4: replace deprecated strncpy with alternatives strncpy() is deprecated for use on NUL-terminated destination strings [1] and as such we should prefer more robust and less ambiguous string interfaces. in file.c: s_last_mounted is marked as __nonstring meaning it does not need to be NUL-terminated. Let's instead use strtomem_pad() to copy bytes from the string source to the byte array destination -- while also ensuring to pad with zeroes. in ioctl.c: We can drop the memset and size argument in favor of using the new 2-argument version of strscpy_pad() -- which was introduced with Commit e6584c3964f2f ("string: Allow 2-argument strscpy()"). This guarantees NUL-termination and NUL-padding on the destination buffer -- which seems to be a requirement judging from this comment: | static int ext4_ioctl_getlabel(struct ext4_sb_info *sbi, char __user *user_label) | { | char label[EXT4_LABEL_MAX + 1]; | | /* | * EXT4_LABEL_MAX must always be smaller than FSLABEL_MAX because | * FSLABEL_MAX must include terminating null byte, while s_volume_name | * does not have to. | */ in super.c: s_first_error_func is marked as __nonstring meaning we can take the same approach as in file.c; just use strtomem_pad() Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1] Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2] Link: https://github.com/KSPP/linux/issues/90 Cc: linux-hardening@vger.kernel.org Signed-off-by: Justin Stitt <justinstitt@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20240321-strncpy-fs-ext4-file-c-v1-1-36a6a09fef0c@google.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2024-03-21 01:03:10 +00:00
strtomem_pad(es->s_first_error_func,
sbi->s_first_error_func, 0);
es->s_first_error_line =
cpu_to_le32(sbi->s_first_error_line);
es->s_first_error_ino =
cpu_to_le32(sbi->s_first_error_ino);
es->s_first_error_block =
cpu_to_le64(sbi->s_first_error_block);
es->s_first_error_errcode =
ext4_errno_to_code(sbi->s_first_error_code);
}
__ext4_update_tstamp(&es->s_last_error_time,
&es->s_last_error_time_hi,
sbi->s_last_error_time);
ext4: replace deprecated strncpy with alternatives strncpy() is deprecated for use on NUL-terminated destination strings [1] and as such we should prefer more robust and less ambiguous string interfaces. in file.c: s_last_mounted is marked as __nonstring meaning it does not need to be NUL-terminated. Let's instead use strtomem_pad() to copy bytes from the string source to the byte array destination -- while also ensuring to pad with zeroes. in ioctl.c: We can drop the memset and size argument in favor of using the new 2-argument version of strscpy_pad() -- which was introduced with Commit e6584c3964f2f ("string: Allow 2-argument strscpy()"). This guarantees NUL-termination and NUL-padding on the destination buffer -- which seems to be a requirement judging from this comment: | static int ext4_ioctl_getlabel(struct ext4_sb_info *sbi, char __user *user_label) | { | char label[EXT4_LABEL_MAX + 1]; | | /* | * EXT4_LABEL_MAX must always be smaller than FSLABEL_MAX because | * FSLABEL_MAX must include terminating null byte, while s_volume_name | * does not have to. | */ in super.c: s_first_error_func is marked as __nonstring meaning we can take the same approach as in file.c; just use strtomem_pad() Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1] Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2] Link: https://github.com/KSPP/linux/issues/90 Cc: linux-hardening@vger.kernel.org Signed-off-by: Justin Stitt <justinstitt@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20240321-strncpy-fs-ext4-file-c-v1-1-36a6a09fef0c@google.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2024-03-21 01:03:10 +00:00
strtomem_pad(es->s_last_error_func, sbi->s_last_error_func, 0);
es->s_last_error_line = cpu_to_le32(sbi->s_last_error_line);
es->s_last_error_ino = cpu_to_le32(sbi->s_last_error_ino);
es->s_last_error_block = cpu_to_le64(sbi->s_last_error_block);
es->s_last_error_errcode =
ext4_errno_to_code(sbi->s_last_error_code);
/*
* Start the daily error reporting function if it hasn't been
* started already
*/
if (!es->s_error_count)
mod_timer(&sbi->s_err_report, jiffies + 24*60*60*HZ);
le32_add_cpu(&es->s_error_count, sbi->s_add_error_count);
sbi->s_add_error_count = 0;
}
spin_unlock(&sbi->s_error_lock);
ext4_superblock_csum_set(sb);
unlock_buffer(sbh);
}
static int ext4_commit_super(struct super_block *sb)
{
struct buffer_head *sbh = EXT4_SB(sb)->s_sbh;
if (!sbh)
return -EINVAL;
if (block_device_ejected(sb))
return -ENODEV;
ext4_update_super(sb);
lock_buffer(sbh);
/* Buffer got discarded which means block device got invalidated */
if (!buffer_mapped(sbh)) {
unlock_buffer(sbh);
return -EIO;
}
if (buffer_write_io_error(sbh) || !buffer_uptodate(sbh)) {
/*
* Oh, dear. A previous attempt to write the
* superblock failed. This could happen because the
* USB device was yanked out. Or it could happen to
* be a transient write error and maybe the block will
* be remapped. Nothing we can do but to retry the
* write and hope for the best.
*/
ext4_msg(sb, KERN_ERR, "previous I/O error to "
"superblock detected");
clear_buffer_write_io_error(sbh);
set_buffer_uptodate(sbh);
}
get_bh(sbh);
/* Clear potential dirty bit if it was journalled update */
clear_buffer_dirty(sbh);
sbh->b_end_io = end_buffer_write_sync;
submit_bh(REQ_OP_WRITE | REQ_SYNC |
(test_opt(sb, BARRIER) ? REQ_FUA : 0), sbh);
wait_on_buffer(sbh);
if (buffer_write_io_error(sbh)) {
ext4_msg(sb, KERN_ERR, "I/O error while writing "
"superblock");
clear_buffer_write_io_error(sbh);
set_buffer_uptodate(sbh);
return -EIO;
}
return 0;
}
/*
* Have we just finished recovery? If so, and if we are mounting (or
* remounting) the filesystem readonly, then we will end up with a
* consistent fs on disk. Record that fact.
*/
static int ext4_mark_recovery_complete(struct super_block *sb,
struct ext4_super_block *es)
{
int err;
journal_t *journal = EXT4_SB(sb)->s_journal;
if (!ext4_has_feature_journal(sb)) {
if (journal != NULL) {
ext4_error(sb, "Journal got removed while the fs was "
"mounted!");
return -EFSCORRUPTED;
}
return 0;
}
jbd2_journal_lock_updates(journal);
err = jbd2_journal_flush(journal, 0);
if (err < 0)
goto out;
ext4: Speedup ext4 orphan inode handling Ext4 orphan inode handling is a bottleneck for workloads which heavily truncate / unlink small files since it contends on the global s_orphan_mutex lock (and generally it's difficult to improve scalability of the ondisk linked list of orphaned inodes). This patch implements new way of handling orphan inodes. Instead of linking orphaned inode into a linked list, we store it's inode number in a new special file which we call "orphan file". Only if there's no more space in the orphan file (too many inodes are currently orphaned) we fall back to using old style linked list. Currently we protect operations in the orphan file with a spinlock for simplicity but even in this setting we can substantially reduce the length of the critical section and thus speedup some workloads. In the next patch we improve this by making orphan handling lockless. Note that the change is backwards compatible when the filesystem is clean - the existence of the orphan file is a compat feature, we set another ro-compat feature indicating orphan file needs scanning for orphaned inodes when mounting filesystem read-write. This ro-compat feature gets cleared on unmount / remount read-only. Some performance data from 80 CPU Xeon Server with 512 GB of RAM, filesystem located on SSD, average of 5 runs: stress-orphan (microbenchmark truncating files byte-by-byte from N processes in parallel) Threads Time Time Vanilla Patched 1 1.057200 0.945600 2 1.680400 1.331800 4 2.547000 1.995000 8 7.049400 6.424200 16 14.827800 14.937600 32 40.948200 33.038200 64 87.787400 60.823600 128 206.504000 122.941400 So we can see significant wins all over the board. Reviewed-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20210816095713.16537-3-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2021-08-16 09:57:06 +00:00
if (sb_rdonly(sb) && (ext4_has_feature_journal_needs_recovery(sb) ||
ext4_has_feature_orphan_present(sb))) {
if (!ext4_orphan_file_empty(sb)) {
ext4_error(sb, "Orphan file not empty on read-only fs.");
err = -EFSCORRUPTED;
goto out;
}
ext4_clear_feature_journal_needs_recovery(sb);
ext4: Speedup ext4 orphan inode handling Ext4 orphan inode handling is a bottleneck for workloads which heavily truncate / unlink small files since it contends on the global s_orphan_mutex lock (and generally it's difficult to improve scalability of the ondisk linked list of orphaned inodes). This patch implements new way of handling orphan inodes. Instead of linking orphaned inode into a linked list, we store it's inode number in a new special file which we call "orphan file". Only if there's no more space in the orphan file (too many inodes are currently orphaned) we fall back to using old style linked list. Currently we protect operations in the orphan file with a spinlock for simplicity but even in this setting we can substantially reduce the length of the critical section and thus speedup some workloads. In the next patch we improve this by making orphan handling lockless. Note that the change is backwards compatible when the filesystem is clean - the existence of the orphan file is a compat feature, we set another ro-compat feature indicating orphan file needs scanning for orphaned inodes when mounting filesystem read-write. This ro-compat feature gets cleared on unmount / remount read-only. Some performance data from 80 CPU Xeon Server with 512 GB of RAM, filesystem located on SSD, average of 5 runs: stress-orphan (microbenchmark truncating files byte-by-byte from N processes in parallel) Threads Time Time Vanilla Patched 1 1.057200 0.945600 2 1.680400 1.331800 4 2.547000 1.995000 8 7.049400 6.424200 16 14.827800 14.937600 32 40.948200 33.038200 64 87.787400 60.823600 128 206.504000 122.941400 So we can see significant wins all over the board. Reviewed-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20210816095713.16537-3-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2021-08-16 09:57:06 +00:00
ext4_clear_feature_orphan_present(sb);
ext4_commit_super(sb);
}
out:
jbd2_journal_unlock_updates(journal);
return err;
}
/*
* If we are mounting (or read-write remounting) a filesystem whose journal
* has recorded an error from a previous lifetime, move that error to the
* main filesystem now.
*/
static int ext4_clear_journal_err(struct super_block *sb,
struct ext4_super_block *es)
{
journal_t *journal;
int j_errno;
const char *errstr;
if (!ext4_has_feature_journal(sb)) {
ext4_error(sb, "Journal got removed while the fs was mounted!");
return -EFSCORRUPTED;
}
journal = EXT4_SB(sb)->s_journal;
/*
* Now check for any error status which may have been recorded in the
* journal by a prior ext4_error() or ext4_abort()
*/
j_errno = jbd2_journal_errno(journal);
if (j_errno) {
char nbuf[16];
errstr = ext4_decode_error(sb, j_errno, nbuf);
ext4_warning(sb, "Filesystem error recorded "
"from previous mount: %s", errstr);
EXT4_SB(sb)->s_mount_state |= EXT4_ERROR_FS;
es->s_state |= cpu_to_le16(EXT4_ERROR_FS);
j_errno = ext4_commit_super(sb);
if (j_errno)
return j_errno;
ext4_warning(sb, "Marked fs in need of filesystem check.");
jbd2_journal_clear_err(journal);
jbd2_journal_update_sb_errno(journal);
}
return 0;
}
/*
* Force the running and committing transactions to commit,
* and wait on the commit.
*/
int ext4_force_commit(struct super_block *sb)
{
return ext4_journal_force_commit(EXT4_SB(sb)->s_journal);
}
static int ext4_sync_fs(struct super_block *sb, int wait)
{
int ret = 0;
tid_t target;
bool needs_barrier = false;
struct ext4_sb_info *sbi = EXT4_SB(sb);
if (unlikely(ext4_forced_shutdown(sb)))
return 0;
trace_ext4_sync_fs(sb, wait);
flush_workqueue(sbi->rsv_conversion_wq);
/*
* Writeback quota in non-journalled quota case - journalled quota has
* no dirty dquots
*/
dquot_writeback_dquots(sb, -1);
/*
* Data writeback is possible w/o journal transaction, so barrier must
* being sent at the end of the function. But we can skip it if
* transaction_commit will do it for us.
*/
if (sbi->s_journal) {
target = jbd2_get_latest_transaction(sbi->s_journal);
if (wait && sbi->s_journal->j_flags & JBD2_BARRIER &&
!jbd2_trans_will_send_data_barrier(sbi->s_journal, target))
needs_barrier = true;
if (jbd2_journal_start_commit(sbi->s_journal, &target)) {
if (wait)
ret = jbd2_log_wait_commit(sbi->s_journal,
target);
}
} else if (wait && test_opt(sb, BARRIER))
needs_barrier = true;
if (needs_barrier) {
int err;
err = blkdev_issue_flush(sb->s_bdev);
if (!ret)
ret = err;
}
return ret;
}
/*
* LVM calls this function before a (read-only) snapshot is created. This
* gives us a chance to flush the journal completely and mark the fs clean.
*
* Note that only this function cannot bring a filesystem to be in a clean
* state independently. It relies on upper layer to stop all data & metadata
* modifications.
*/
filesystem freeze: add error handling of write_super_lockfs/unlockfs Currently, ext3 in mainline Linux doesn't have the freeze feature which suspends write requests. So, we cannot take a backup which keeps the filesystem's consistency with the storage device's features (snapshot and replication) while it is mounted. In many case, a commercial filesystem (e.g. VxFS) has the freeze feature and it would be used to get the consistent backup. If Linux's standard filesystem ext3 has the freeze feature, we can do it without a commercial filesystem. So I have implemented the ioctls of the freeze feature. I think we can take the consistent backup with the following steps. 1. Freeze the filesystem with the freeze ioctl. 2. Separate the replication volume or create the snapshot with the storage device's feature. 3. Unfreeze the filesystem with the unfreeze ioctl. 4. Take the backup from the separated replication volume or the snapshot. This patch: VFS: Changed the type of write_super_lockfs and unlockfs from "void" to "int" so that they can return an error. Rename write_super_lockfs and unlockfs of the super block operation freeze_fs and unfreeze_fs to avoid a confusion. ext3, ext4, xfs, gfs2, jfs: Changed the type of write_super_lockfs and unlockfs from "void" to "int" so that write_super_lockfs returns an error if needed, and unlockfs always returns 0. reiserfs: Changed the type of write_super_lockfs and unlockfs from "void" to "int" so that they always return 0 (success) to keep a current behavior. Signed-off-by: Takashi Sato <t-sato@yk.jp.nec.com> Signed-off-by: Masayuki Hamaguchi <m-hamaguchi@ys.jp.nec.com> Cc: <xfs-masters@oss.sgi.com> Cc: <linux-ext4@vger.kernel.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Dave Kleikamp <shaggy@austin.ibm.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Alasdair G Kergon <agk@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-10 00:40:58 +00:00
static int ext4_freeze(struct super_block *sb)
{
filesystem freeze: add error handling of write_super_lockfs/unlockfs Currently, ext3 in mainline Linux doesn't have the freeze feature which suspends write requests. So, we cannot take a backup which keeps the filesystem's consistency with the storage device's features (snapshot and replication) while it is mounted. In many case, a commercial filesystem (e.g. VxFS) has the freeze feature and it would be used to get the consistent backup. If Linux's standard filesystem ext3 has the freeze feature, we can do it without a commercial filesystem. So I have implemented the ioctls of the freeze feature. I think we can take the consistent backup with the following steps. 1. Freeze the filesystem with the freeze ioctl. 2. Separate the replication volume or create the snapshot with the storage device's feature. 3. Unfreeze the filesystem with the unfreeze ioctl. 4. Take the backup from the separated replication volume or the snapshot. This patch: VFS: Changed the type of write_super_lockfs and unlockfs from "void" to "int" so that they can return an error. Rename write_super_lockfs and unlockfs of the super block operation freeze_fs and unfreeze_fs to avoid a confusion. ext3, ext4, xfs, gfs2, jfs: Changed the type of write_super_lockfs and unlockfs from "void" to "int" so that write_super_lockfs returns an error if needed, and unlockfs always returns 0. reiserfs: Changed the type of write_super_lockfs and unlockfs from "void" to "int" so that they always return 0 (success) to keep a current behavior. Signed-off-by: Takashi Sato <t-sato@yk.jp.nec.com> Signed-off-by: Masayuki Hamaguchi <m-hamaguchi@ys.jp.nec.com> Cc: <xfs-masters@oss.sgi.com> Cc: <linux-ext4@vger.kernel.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Dave Kleikamp <shaggy@austin.ibm.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Alasdair G Kergon <agk@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-10 00:40:58 +00:00
int error = 0;
journal_t *journal = EXT4_SB(sb)->s_journal;
if (journal) {
/* Now we set up the journal barrier. */
jbd2_journal_lock_updates(journal);
/*
* Don't clear the needs_recovery flag if we failed to
* flush the journal.
*/
error = jbd2_journal_flush(journal, 0);
if (error < 0)
goto out;
/* Journal blocked and flushed, clear needs_recovery flag. */
ext4_clear_feature_journal_needs_recovery(sb);
ext4: Speedup ext4 orphan inode handling Ext4 orphan inode handling is a bottleneck for workloads which heavily truncate / unlink small files since it contends on the global s_orphan_mutex lock (and generally it's difficult to improve scalability of the ondisk linked list of orphaned inodes). This patch implements new way of handling orphan inodes. Instead of linking orphaned inode into a linked list, we store it's inode number in a new special file which we call "orphan file". Only if there's no more space in the orphan file (too many inodes are currently orphaned) we fall back to using old style linked list. Currently we protect operations in the orphan file with a spinlock for simplicity but even in this setting we can substantially reduce the length of the critical section and thus speedup some workloads. In the next patch we improve this by making orphan handling lockless. Note that the change is backwards compatible when the filesystem is clean - the existence of the orphan file is a compat feature, we set another ro-compat feature indicating orphan file needs scanning for orphaned inodes when mounting filesystem read-write. This ro-compat feature gets cleared on unmount / remount read-only. Some performance data from 80 CPU Xeon Server with 512 GB of RAM, filesystem located on SSD, average of 5 runs: stress-orphan (microbenchmark truncating files byte-by-byte from N processes in parallel) Threads Time Time Vanilla Patched 1 1.057200 0.945600 2 1.680400 1.331800 4 2.547000 1.995000 8 7.049400 6.424200 16 14.827800 14.937600 32 40.948200 33.038200 64 87.787400 60.823600 128 206.504000 122.941400 So we can see significant wins all over the board. Reviewed-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20210816095713.16537-3-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2021-08-16 09:57:06 +00:00
if (ext4_orphan_file_empty(sb))
ext4_clear_feature_orphan_present(sb);
}
error = ext4_commit_super(sb);
out:
if (journal)
/* we rely on upper layer to stop further updates */
jbd2_journal_unlock_updates(journal);
return error;
}
/*
* Called by LVM after the snapshot is done. We need to reset the RECOVER
* flag here, even though the filesystem is not technically dirty yet.
*/
filesystem freeze: add error handling of write_super_lockfs/unlockfs Currently, ext3 in mainline Linux doesn't have the freeze feature which suspends write requests. So, we cannot take a backup which keeps the filesystem's consistency with the storage device's features (snapshot and replication) while it is mounted. In many case, a commercial filesystem (e.g. VxFS) has the freeze feature and it would be used to get the consistent backup. If Linux's standard filesystem ext3 has the freeze feature, we can do it without a commercial filesystem. So I have implemented the ioctls of the freeze feature. I think we can take the consistent backup with the following steps. 1. Freeze the filesystem with the freeze ioctl. 2. Separate the replication volume or create the snapshot with the storage device's feature. 3. Unfreeze the filesystem with the unfreeze ioctl. 4. Take the backup from the separated replication volume or the snapshot. This patch: VFS: Changed the type of write_super_lockfs and unlockfs from "void" to "int" so that they can return an error. Rename write_super_lockfs and unlockfs of the super block operation freeze_fs and unfreeze_fs to avoid a confusion. ext3, ext4, xfs, gfs2, jfs: Changed the type of write_super_lockfs and unlockfs from "void" to "int" so that write_super_lockfs returns an error if needed, and unlockfs always returns 0. reiserfs: Changed the type of write_super_lockfs and unlockfs from "void" to "int" so that they always return 0 (success) to keep a current behavior. Signed-off-by: Takashi Sato <t-sato@yk.jp.nec.com> Signed-off-by: Masayuki Hamaguchi <m-hamaguchi@ys.jp.nec.com> Cc: <xfs-masters@oss.sgi.com> Cc: <linux-ext4@vger.kernel.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Dave Kleikamp <shaggy@austin.ibm.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Alasdair G Kergon <agk@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-10 00:40:58 +00:00
static int ext4_unfreeze(struct super_block *sb)
{
if (ext4_forced_shutdown(sb))
return 0;
if (EXT4_SB(sb)->s_journal) {
/* Reset the needs_recovery flag before the fs is unlocked. */
ext4_set_feature_journal_needs_recovery(sb);
ext4: Speedup ext4 orphan inode handling Ext4 orphan inode handling is a bottleneck for workloads which heavily truncate / unlink small files since it contends on the global s_orphan_mutex lock (and generally it's difficult to improve scalability of the ondisk linked list of orphaned inodes). This patch implements new way of handling orphan inodes. Instead of linking orphaned inode into a linked list, we store it's inode number in a new special file which we call "orphan file". Only if there's no more space in the orphan file (too many inodes are currently orphaned) we fall back to using old style linked list. Currently we protect operations in the orphan file with a spinlock for simplicity but even in this setting we can substantially reduce the length of the critical section and thus speedup some workloads. In the next patch we improve this by making orphan handling lockless. Note that the change is backwards compatible when the filesystem is clean - the existence of the orphan file is a compat feature, we set another ro-compat feature indicating orphan file needs scanning for orphaned inodes when mounting filesystem read-write. This ro-compat feature gets cleared on unmount / remount read-only. Some performance data from 80 CPU Xeon Server with 512 GB of RAM, filesystem located on SSD, average of 5 runs: stress-orphan (microbenchmark truncating files byte-by-byte from N processes in parallel) Threads Time Time Vanilla Patched 1 1.057200 0.945600 2 1.680400 1.331800 4 2.547000 1.995000 8 7.049400 6.424200 16 14.827800 14.937600 32 40.948200 33.038200 64 87.787400 60.823600 128 206.504000 122.941400 So we can see significant wins all over the board. Reviewed-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20210816095713.16537-3-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2021-08-16 09:57:06 +00:00
if (ext4_has_feature_orphan_file(sb))
ext4_set_feature_orphan_present(sb);
}
ext4_commit_super(sb);
filesystem freeze: add error handling of write_super_lockfs/unlockfs Currently, ext3 in mainline Linux doesn't have the freeze feature which suspends write requests. So, we cannot take a backup which keeps the filesystem's consistency with the storage device's features (snapshot and replication) while it is mounted. In many case, a commercial filesystem (e.g. VxFS) has the freeze feature and it would be used to get the consistent backup. If Linux's standard filesystem ext3 has the freeze feature, we can do it without a commercial filesystem. So I have implemented the ioctls of the freeze feature. I think we can take the consistent backup with the following steps. 1. Freeze the filesystem with the freeze ioctl. 2. Separate the replication volume or create the snapshot with the storage device's feature. 3. Unfreeze the filesystem with the unfreeze ioctl. 4. Take the backup from the separated replication volume or the snapshot. This patch: VFS: Changed the type of write_super_lockfs and unlockfs from "void" to "int" so that they can return an error. Rename write_super_lockfs and unlockfs of the super block operation freeze_fs and unfreeze_fs to avoid a confusion. ext3, ext4, xfs, gfs2, jfs: Changed the type of write_super_lockfs and unlockfs from "void" to "int" so that write_super_lockfs returns an error if needed, and unlockfs always returns 0. reiserfs: Changed the type of write_super_lockfs and unlockfs from "void" to "int" so that they always return 0 (success) to keep a current behavior. Signed-off-by: Takashi Sato <t-sato@yk.jp.nec.com> Signed-off-by: Masayuki Hamaguchi <m-hamaguchi@ys.jp.nec.com> Cc: <xfs-masters@oss.sgi.com> Cc: <linux-ext4@vger.kernel.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Dave Kleikamp <shaggy@austin.ibm.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Alasdair G Kergon <agk@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-10 00:40:58 +00:00
return 0;
}
/*
* Structure to save mount options for ext4_remount's benefit
*/
struct ext4_mount_options {
unsigned long s_mount_opt;
unsigned long s_mount_opt2;
kuid_t s_resuid;
kgid_t s_resgid;
unsigned long s_commit_interval;
u32 s_min_batch_time, s_max_batch_time;
#ifdef CONFIG_QUOTA
int s_jquota_fmt;
char *s_qf_names[EXT4_MAXQUOTAS];
#endif
};
static int __ext4_remount(struct fs_context *fc, struct super_block *sb)
{
ext4: Completely separate options parsing and sb setup The new mount api separates option parsing and super block setup into two distinct steps and so we need to separate the options parsing out of the ext4_fill_super() and ext4_remount(). In order to achieve this we have to create new ext4_fill_super() and ext4_remount() functions which will serve its purpose only until we actually do convert to the new api (as such they are only temporary for this patch series) and move the option parsing out of the old function which will now be renamed to __ext4_fill_super() and __ext4_remount(). There is a small complication in the fact that while the mount option parsing is going to happen before we get to __ext4_fill_super(), the mount options stored in the super block itself needs to be applied first, before the user specified mount options. So with this patch we're going through the following sequence: - parse user provided options (including sb block) - initialize sbi and store s_sb_block if provided - in __ext4_fill_super() - read the super block - parse and apply options specified in s_mount_opts - check and apply user provided options stored in ctx - continue with the regular ext4_fill_super operation It's not exactly the most elegant solution, but if we still want to support s_mount_opts we have to do it in this order. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Link: https://lore.kernel.org/r/20211027141857.33657-10-lczerner@redhat.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2021-10-27 14:18:53 +00:00
struct ext4_fs_context *ctx = fc->fs_private;
struct ext4_super_block *es;
struct ext4_sb_info *sbi = EXT4_SB(sb);
unsigned long old_sb_flags;
struct ext4_mount_options old_opts;
ext4_group_t g;
int err = 0;
ext4: fix race between writepages and remount We got a WARNING in ext4_add_complete_io: ================================================================== WARNING: at fs/ext4/page-io.c:231 ext4_put_io_end_defer+0x182/0x250 CPU: 10 PID: 77 Comm: ksoftirqd/10 Tainted: 6.3.0-rc2 #85 RIP: 0010:ext4_put_io_end_defer+0x182/0x250 [ext4] [...] Call Trace: <TASK> ext4_end_bio+0xa8/0x240 [ext4] bio_endio+0x195/0x310 blk_update_request+0x184/0x770 scsi_end_request+0x2f/0x240 scsi_io_completion+0x75/0x450 scsi_finish_command+0xef/0x160 scsi_complete+0xa3/0x180 blk_complete_reqs+0x60/0x80 blk_done_softirq+0x25/0x40 __do_softirq+0x119/0x4c8 run_ksoftirqd+0x42/0x70 smpboot_thread_fn+0x136/0x3c0 kthread+0x140/0x1a0 ret_from_fork+0x2c/0x50 ================================================================== Above issue may happen as follows: cpu1 cpu2 ----------------------------|---------------------------- mount -o dioread_lock ext4_writepages ext4_do_writepages *if (ext4_should_dioread_nolock(inode))* // rsv_blocks is not assigned here mount -o remount,dioread_nolock ext4_journal_start_with_reserve __ext4_journal_start __ext4_journal_start_sb jbd2__journal_start *if (rsv_blocks)* // h_rsv_handle is not initialized here mpage_map_and_submit_extent mpage_map_one_extent dioread_nolock = ext4_should_dioread_nolock(inode) if (dioread_nolock && (map->m_flags & EXT4_MAP_UNWRITTEN)) mpd->io_submit.io_end->handle = handle->h_rsv_handle ext4_set_io_unwritten_flag io_end->flag |= EXT4_IO_END_UNWRITTEN // now io_end->handle is NULL but has EXT4_IO_END_UNWRITTEN flag scsi_finish_command scsi_io_completion scsi_io_completion_action scsi_end_request blk_update_request req_bio_endio bio_endio bio->bi_end_io > ext4_end_bio ext4_put_io_end_defer ext4_add_complete_io // trigger WARN_ON(!io_end->handle && sbi->s_journal); The immediate cause of this problem is that ext4_should_dioread_nolock() function returns inconsistent values in the ext4_do_writepages() and mpage_map_one_extent(). There are four conditions in this function that can be changed at mount time to cause this problem. These four conditions can be divided into two categories: (1) journal_data and EXT4_EXTENTS_FL, which can be changed by ioctl (2) DELALLOC and DIOREAD_NOLOCK, which can be changed by remount The two in the first category have been fixed by commit c8585c6fcaf2 ("ext4: fix races between changing inode journal mode and ext4_writepages") and commit cb85f4d23f79 ("ext4: fix race between writepages and enabling EXT4_EXTENTS_FL") respectively. Two cases in the other category have not yet been fixed, and the above issue is caused by this situation. We refer to the fix for the first category, when applying options during remount, we grab s_writepages_rwsem to avoid racing with writepages ops to trigger this problem. Fixes: 6b523df4fb5a ("ext4: use transaction reservation for extent conversion in ext4_end_io") Cc: stable@vger.kernel.org Signed-off-by: Baokun Li <libaokun1@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20230524072538.2883391-1-libaokun1@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2023-05-24 07:25:38 +00:00
int alloc_ctx;
#ifdef CONFIG_QUOTA
int enable_quota = 0;
int i, j;
char *to_free[EXT4_MAXQUOTAS];
#endif
/* Store the original options */
old_sb_flags = sb->s_flags;
old_opts.s_mount_opt = sbi->s_mount_opt;
old_opts.s_mount_opt2 = sbi->s_mount_opt2;
old_opts.s_resuid = sbi->s_resuid;
old_opts.s_resgid = sbi->s_resgid;
old_opts.s_commit_interval = sbi->s_commit_interval;
old_opts.s_min_batch_time = sbi->s_min_batch_time;
old_opts.s_max_batch_time = sbi->s_max_batch_time;
#ifdef CONFIG_QUOTA
old_opts.s_jquota_fmt = sbi->s_jquota_fmt;
for (i = 0; i < EXT4_MAXQUOTAS; i++)
if (sbi->s_qf_names[i]) {
char *qf_name = get_qf_name(sb, sbi, i);
old_opts.s_qf_names[i] = kstrdup(qf_name, GFP_KERNEL);
if (!old_opts.s_qf_names[i]) {
for (j = 0; j < i; j++)
kfree(old_opts.s_qf_names[j]);
return -ENOMEM;
}
} else
old_opts.s_qf_names[i] = NULL;
#endif
if (!(ctx->spec & EXT4_SPEC_JOURNAL_IOPRIO)) {
if (sbi->s_journal && sbi->s_journal->j_task->io_context)
ctx->journal_ioprio =
sbi->s_journal->j_task->io_context->ioprio;
else
ctx->journal_ioprio = DEFAULT_JOURNAL_IOPRIO;
}
ext4: fix race between writepages and remount We got a WARNING in ext4_add_complete_io: ================================================================== WARNING: at fs/ext4/page-io.c:231 ext4_put_io_end_defer+0x182/0x250 CPU: 10 PID: 77 Comm: ksoftirqd/10 Tainted: 6.3.0-rc2 #85 RIP: 0010:ext4_put_io_end_defer+0x182/0x250 [ext4] [...] Call Trace: <TASK> ext4_end_bio+0xa8/0x240 [ext4] bio_endio+0x195/0x310 blk_update_request+0x184/0x770 scsi_end_request+0x2f/0x240 scsi_io_completion+0x75/0x450 scsi_finish_command+0xef/0x160 scsi_complete+0xa3/0x180 blk_complete_reqs+0x60/0x80 blk_done_softirq+0x25/0x40 __do_softirq+0x119/0x4c8 run_ksoftirqd+0x42/0x70 smpboot_thread_fn+0x136/0x3c0 kthread+0x140/0x1a0 ret_from_fork+0x2c/0x50 ================================================================== Above issue may happen as follows: cpu1 cpu2 ----------------------------|---------------------------- mount -o dioread_lock ext4_writepages ext4_do_writepages *if (ext4_should_dioread_nolock(inode))* // rsv_blocks is not assigned here mount -o remount,dioread_nolock ext4_journal_start_with_reserve __ext4_journal_start __ext4_journal_start_sb jbd2__journal_start *if (rsv_blocks)* // h_rsv_handle is not initialized here mpage_map_and_submit_extent mpage_map_one_extent dioread_nolock = ext4_should_dioread_nolock(inode) if (dioread_nolock && (map->m_flags & EXT4_MAP_UNWRITTEN)) mpd->io_submit.io_end->handle = handle->h_rsv_handle ext4_set_io_unwritten_flag io_end->flag |= EXT4_IO_END_UNWRITTEN // now io_end->handle is NULL but has EXT4_IO_END_UNWRITTEN flag scsi_finish_command scsi_io_completion scsi_io_completion_action scsi_end_request blk_update_request req_bio_endio bio_endio bio->bi_end_io > ext4_end_bio ext4_put_io_end_defer ext4_add_complete_io // trigger WARN_ON(!io_end->handle && sbi->s_journal); The immediate cause of this problem is that ext4_should_dioread_nolock() function returns inconsistent values in the ext4_do_writepages() and mpage_map_one_extent(). There are four conditions in this function that can be changed at mount time to cause this problem. These four conditions can be divided into two categories: (1) journal_data and EXT4_EXTENTS_FL, which can be changed by ioctl (2) DELALLOC and DIOREAD_NOLOCK, which can be changed by remount The two in the first category have been fixed by commit c8585c6fcaf2 ("ext4: fix races between changing inode journal mode and ext4_writepages") and commit cb85f4d23f79 ("ext4: fix race between writepages and enabling EXT4_EXTENTS_FL") respectively. Two cases in the other category have not yet been fixed, and the above issue is caused by this situation. We refer to the fix for the first category, when applying options during remount, we grab s_writepages_rwsem to avoid racing with writepages ops to trigger this problem. Fixes: 6b523df4fb5a ("ext4: use transaction reservation for extent conversion in ext4_end_io") Cc: stable@vger.kernel.org Signed-off-by: Baokun Li <libaokun1@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20230524072538.2883391-1-libaokun1@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2023-05-24 07:25:38 +00:00
/*
* Changing the DIOREAD_NOLOCK or DELALLOC mount options may cause
* two calls to ext4_should_dioread_nolock() to return inconsistent
* values, triggering WARN_ON in ext4_add_complete_io(). we grab
* here s_writepages_rwsem to avoid race between writepages ops and
* remount.
*/
alloc_ctx = ext4_writepages_down_write(sb);
ext4: Completely separate options parsing and sb setup The new mount api separates option parsing and super block setup into two distinct steps and so we need to separate the options parsing out of the ext4_fill_super() and ext4_remount(). In order to achieve this we have to create new ext4_fill_super() and ext4_remount() functions which will serve its purpose only until we actually do convert to the new api (as such they are only temporary for this patch series) and move the option parsing out of the old function which will now be renamed to __ext4_fill_super() and __ext4_remount(). There is a small complication in the fact that while the mount option parsing is going to happen before we get to __ext4_fill_super(), the mount options stored in the super block itself needs to be applied first, before the user specified mount options. So with this patch we're going through the following sequence: - parse user provided options (including sb block) - initialize sbi and store s_sb_block if provided - in __ext4_fill_super() - read the super block - parse and apply options specified in s_mount_opts - check and apply user provided options stored in ctx - continue with the regular ext4_fill_super operation It's not exactly the most elegant solution, but if we still want to support s_mount_opts we have to do it in this order. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Link: https://lore.kernel.org/r/20211027141857.33657-10-lczerner@redhat.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2021-10-27 14:18:53 +00:00
ext4_apply_options(fc, sb);
ext4: fix race between writepages and remount We got a WARNING in ext4_add_complete_io: ================================================================== WARNING: at fs/ext4/page-io.c:231 ext4_put_io_end_defer+0x182/0x250 CPU: 10 PID: 77 Comm: ksoftirqd/10 Tainted: 6.3.0-rc2 #85 RIP: 0010:ext4_put_io_end_defer+0x182/0x250 [ext4] [...] Call Trace: <TASK> ext4_end_bio+0xa8/0x240 [ext4] bio_endio+0x195/0x310 blk_update_request+0x184/0x770 scsi_end_request+0x2f/0x240 scsi_io_completion+0x75/0x450 scsi_finish_command+0xef/0x160 scsi_complete+0xa3/0x180 blk_complete_reqs+0x60/0x80 blk_done_softirq+0x25/0x40 __do_softirq+0x119/0x4c8 run_ksoftirqd+0x42/0x70 smpboot_thread_fn+0x136/0x3c0 kthread+0x140/0x1a0 ret_from_fork+0x2c/0x50 ================================================================== Above issue may happen as follows: cpu1 cpu2 ----------------------------|---------------------------- mount -o dioread_lock ext4_writepages ext4_do_writepages *if (ext4_should_dioread_nolock(inode))* // rsv_blocks is not assigned here mount -o remount,dioread_nolock ext4_journal_start_with_reserve __ext4_journal_start __ext4_journal_start_sb jbd2__journal_start *if (rsv_blocks)* // h_rsv_handle is not initialized here mpage_map_and_submit_extent mpage_map_one_extent dioread_nolock = ext4_should_dioread_nolock(inode) if (dioread_nolock && (map->m_flags & EXT4_MAP_UNWRITTEN)) mpd->io_submit.io_end->handle = handle->h_rsv_handle ext4_set_io_unwritten_flag io_end->flag |= EXT4_IO_END_UNWRITTEN // now io_end->handle is NULL but has EXT4_IO_END_UNWRITTEN flag scsi_finish_command scsi_io_completion scsi_io_completion_action scsi_end_request blk_update_request req_bio_endio bio_endio bio->bi_end_io > ext4_end_bio ext4_put_io_end_defer ext4_add_complete_io // trigger WARN_ON(!io_end->handle && sbi->s_journal); The immediate cause of this problem is that ext4_should_dioread_nolock() function returns inconsistent values in the ext4_do_writepages() and mpage_map_one_extent(). There are four conditions in this function that can be changed at mount time to cause this problem. These four conditions can be divided into two categories: (1) journal_data and EXT4_EXTENTS_FL, which can be changed by ioctl (2) DELALLOC and DIOREAD_NOLOCK, which can be changed by remount The two in the first category have been fixed by commit c8585c6fcaf2 ("ext4: fix races between changing inode journal mode and ext4_writepages") and commit cb85f4d23f79 ("ext4: fix race between writepages and enabling EXT4_EXTENTS_FL") respectively. Two cases in the other category have not yet been fixed, and the above issue is caused by this situation. We refer to the fix for the first category, when applying options during remount, we grab s_writepages_rwsem to avoid racing with writepages ops to trigger this problem. Fixes: 6b523df4fb5a ("ext4: use transaction reservation for extent conversion in ext4_end_io") Cc: stable@vger.kernel.org Signed-off-by: Baokun Li <libaokun1@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20230524072538.2883391-1-libaokun1@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2023-05-24 07:25:38 +00:00
ext4_writepages_up_write(sb, alloc_ctx);
if ((old_opts.s_mount_opt & EXT4_MOUNT_JOURNAL_CHECKSUM) ^
test_opt(sb, JOURNAL_CHECKSUM)) {
ext4_msg(sb, KERN_ERR, "changing journal_checksum "
"during remount not supported; ignoring");
sbi->s_mount_opt ^= EXT4_MOUNT_JOURNAL_CHECKSUM;
}
if (test_opt(sb, DATA_FLAGS) == EXT4_MOUNT_JOURNAL_DATA) {
if (test_opt2(sb, EXPLICIT_DELALLOC)) {
ext4_msg(sb, KERN_ERR, "can't mount with "
"both data=journal and delalloc");
err = -EINVAL;
goto restore_opts;
}
if (test_opt(sb, DIOREAD_NOLOCK)) {
ext4_msg(sb, KERN_ERR, "can't mount with "
"both data=journal and dioread_nolock");
err = -EINVAL;
goto restore_opts;
}
} else if (test_opt(sb, DATA_FLAGS) == EXT4_MOUNT_ORDERED_DATA) {
if (test_opt(sb, JOURNAL_ASYNC_COMMIT)) {
ext4_msg(sb, KERN_ERR, "can't mount with "
"journal_async_commit in data=ordered mode");
err = -EINVAL;
goto restore_opts;
}
}
if ((sbi->s_mount_opt ^ old_opts.s_mount_opt) & EXT4_MOUNT_NO_MBCACHE) {
ext4_msg(sb, KERN_ERR, "can't enable nombcache during remount");
err = -EINVAL;
goto restore_opts;
}
if (test_opt2(sb, ABORT))
ext4_abort(sb, ESHUTDOWN, "Abort forced by user");
Rename superblock flags (MS_xyz -> SB_xyz) This is a pure automated search-and-replace of the internal kernel superblock flags. The s_flags are now called SB_*, with the names and the values for the moment mirroring the MS_* flags that they're equivalent to. Note how the MS_xyz flags are the ones passed to the mount system call, while the SB_xyz flags are what we then use in sb->s_flags. The script to do this was: # places to look in; re security/*: it generally should *not* be # touched (that stuff parses mount(2) arguments directly), but # there are two places where we really deal with superblock flags. FILES="drivers/mtd drivers/staging/lustre fs ipc mm \ include/linux/fs.h include/uapi/linux/bfs_fs.h \ security/apparmor/apparmorfs.c security/apparmor/include/lib.h" # the list of MS_... constants SYMS="RDONLY NOSUID NODEV NOEXEC SYNCHRONOUS REMOUNT MANDLOCK \ DIRSYNC NOATIME NODIRATIME BIND MOVE REC VERBOSE SILENT \ POSIXACL UNBINDABLE PRIVATE SLAVE SHARED RELATIME KERNMOUNT \ I_VERSION STRICTATIME LAZYTIME SUBMOUNT NOREMOTELOCK NOSEC BORN \ ACTIVE NOUSER" SED_PROG= for i in $SYMS; do SED_PROG="$SED_PROG -e s/MS_$i/SB_$i/g"; done # we want files that contain at least one of MS_..., # with fs/namespace.c and fs/pnode.c excluded. L=$(for i in $SYMS; do git grep -w -l MS_$i $FILES; done| sort|uniq|grep -v '^fs/namespace.c'|grep -v '^fs/pnode.c') for f in $L; do sed -i $f $SED_PROG; done Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-27 21:05:09 +00:00
sb->s_flags = (sb->s_flags & ~SB_POSIXACL) |
(test_opt(sb, POSIX_ACL) ? SB_POSIXACL : 0);
es = sbi->s_es;
if (sbi->s_journal) {
ext4_init_journal_params(sb, sbi->s_journal);
ext4: Completely separate options parsing and sb setup The new mount api separates option parsing and super block setup into two distinct steps and so we need to separate the options parsing out of the ext4_fill_super() and ext4_remount(). In order to achieve this we have to create new ext4_fill_super() and ext4_remount() functions which will serve its purpose only until we actually do convert to the new api (as such they are only temporary for this patch series) and move the option parsing out of the old function which will now be renamed to __ext4_fill_super() and __ext4_remount(). There is a small complication in the fact that while the mount option parsing is going to happen before we get to __ext4_fill_super(), the mount options stored in the super block itself needs to be applied first, before the user specified mount options. So with this patch we're going through the following sequence: - parse user provided options (including sb block) - initialize sbi and store s_sb_block if provided - in __ext4_fill_super() - read the super block - parse and apply options specified in s_mount_opts - check and apply user provided options stored in ctx - continue with the regular ext4_fill_super operation It's not exactly the most elegant solution, but if we still want to support s_mount_opts we have to do it in this order. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Link: https://lore.kernel.org/r/20211027141857.33657-10-lczerner@redhat.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2021-10-27 14:18:53 +00:00
set_task_ioprio(sbi->s_journal->j_task, ctx->journal_ioprio);
}
/* Flush outstanding errors before changing fs state */
flush_work(&sbi->s_sb_upd_work);
if ((bool)(fc->sb_flags & SB_RDONLY) != sb_rdonly(sb)) {
if (ext4_forced_shutdown(sb)) {
err = -EROFS;
goto restore_opts;
}
if (fc->sb_flags & SB_RDONLY) {
err = sync_filesystem(sb);
if (err < 0)
goto restore_opts;
err = dquot_suspend(sb, -1);
if (err < 0)
goto restore_opts;
/*
* First of all, the unconditional stuff we have to do
* to disable replay of the journal when we next remount
*/
Rename superblock flags (MS_xyz -> SB_xyz) This is a pure automated search-and-replace of the internal kernel superblock flags. The s_flags are now called SB_*, with the names and the values for the moment mirroring the MS_* flags that they're equivalent to. Note how the MS_xyz flags are the ones passed to the mount system call, while the SB_xyz flags are what we then use in sb->s_flags. The script to do this was: # places to look in; re security/*: it generally should *not* be # touched (that stuff parses mount(2) arguments directly), but # there are two places where we really deal with superblock flags. FILES="drivers/mtd drivers/staging/lustre fs ipc mm \ include/linux/fs.h include/uapi/linux/bfs_fs.h \ security/apparmor/apparmorfs.c security/apparmor/include/lib.h" # the list of MS_... constants SYMS="RDONLY NOSUID NODEV NOEXEC SYNCHRONOUS REMOUNT MANDLOCK \ DIRSYNC NOATIME NODIRATIME BIND MOVE REC VERBOSE SILENT \ POSIXACL UNBINDABLE PRIVATE SLAVE SHARED RELATIME KERNMOUNT \ I_VERSION STRICTATIME LAZYTIME SUBMOUNT NOREMOTELOCK NOSEC BORN \ ACTIVE NOUSER" SED_PROG= for i in $SYMS; do SED_PROG="$SED_PROG -e s/MS_$i/SB_$i/g"; done # we want files that contain at least one of MS_..., # with fs/namespace.c and fs/pnode.c excluded. L=$(for i in $SYMS; do git grep -w -l MS_$i $FILES; done| sort|uniq|grep -v '^fs/namespace.c'|grep -v '^fs/pnode.c') for f in $L; do sed -i $f $SED_PROG; done Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-27 21:05:09 +00:00
sb->s_flags |= SB_RDONLY;
/*
* OK, test if we are remounting a valid rw partition
* readonly, and if so set the rdonly flag and then
* mark the partition as valid again.
*/
if (!(es->s_state & cpu_to_le16(EXT4_VALID_FS)) &&
(sbi->s_mount_state & EXT4_VALID_FS))
es->s_state = cpu_to_le16(sbi->s_mount_state);
if (sbi->s_journal) {
/*
* We let remount-ro finish even if marking fs
* as clean failed...
*/
ext4_mark_recovery_complete(sb, es);
}
} else {
/* Make sure we can mount this feature set readwrite */
if (ext4_has_feature_readonly(sb) ||
!ext4_feature_set_ok(sb, 0)) {
err = -EROFS;
goto restore_opts;
}
/*
* Make sure the group descriptor checksums
* are sane. If they aren't, refuse to remount r/w.
*/
for (g = 0; g < sbi->s_groups_count; g++) {
struct ext4_group_desc *gdp =
ext4_get_group_desc(sb, g, NULL);
if (!ext4_group_desc_csum_verify(sb, g, gdp)) {
ext4_msg(sb, KERN_ERR,
"ext4_remount: Checksum for group %u failed (%u!=%u)",
g, le16_to_cpu(ext4_group_desc_csum(sb, g, gdp)),
le16_to_cpu(gdp->bg_checksum));
err = -EFSBADCRC;
goto restore_opts;
}
}
/*
* If we have an unprocessed orphan list hanging
* around from a previously readonly bdev mount,
* require a full umount/remount for now.
*/
ext4: Speedup ext4 orphan inode handling Ext4 orphan inode handling is a bottleneck for workloads which heavily truncate / unlink small files since it contends on the global s_orphan_mutex lock (and generally it's difficult to improve scalability of the ondisk linked list of orphaned inodes). This patch implements new way of handling orphan inodes. Instead of linking orphaned inode into a linked list, we store it's inode number in a new special file which we call "orphan file". Only if there's no more space in the orphan file (too many inodes are currently orphaned) we fall back to using old style linked list. Currently we protect operations in the orphan file with a spinlock for simplicity but even in this setting we can substantially reduce the length of the critical section and thus speedup some workloads. In the next patch we improve this by making orphan handling lockless. Note that the change is backwards compatible when the filesystem is clean - the existence of the orphan file is a compat feature, we set another ro-compat feature indicating orphan file needs scanning for orphaned inodes when mounting filesystem read-write. This ro-compat feature gets cleared on unmount / remount read-only. Some performance data from 80 CPU Xeon Server with 512 GB of RAM, filesystem located on SSD, average of 5 runs: stress-orphan (microbenchmark truncating files byte-by-byte from N processes in parallel) Threads Time Time Vanilla Patched 1 1.057200 0.945600 2 1.680400 1.331800 4 2.547000 1.995000 8 7.049400 6.424200 16 14.827800 14.937600 32 40.948200 33.038200 64 87.787400 60.823600 128 206.504000 122.941400 So we can see significant wins all over the board. Reviewed-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20210816095713.16537-3-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2021-08-16 09:57:06 +00:00
if (es->s_last_orphan || !ext4_orphan_file_empty(sb)) {
ext4_msg(sb, KERN_WARNING, "Couldn't "
"remount RDWR because of unprocessed "
"orphan inode list. Please "
"umount/remount instead");
err = -EINVAL;
goto restore_opts;
}
/*
* Mounting a RDONLY partition read-write, so reread
* and store the current valid flag. (It may have
* been changed by e2fsck since we originally mounted
* the partition.)
*/
if (sbi->s_journal) {
err = ext4_clear_journal_err(sb, es);
if (err)
goto restore_opts;
}
sbi->s_mount_state = (le16_to_cpu(es->s_state) &
~EXT4_FC_REPLAY);
err = ext4_setup_super(sb, es, 0);
if (err)
goto restore_opts;
sb->s_flags &= ~SB_RDONLY;
if (ext4_has_feature_mmp(sb)) {
err = ext4_multi_mount_protect(sb,
le64_to_cpu(es->s_mmp_block));
if (err)
goto restore_opts;
}
#ifdef CONFIG_QUOTA
enable_quota = 1;
#endif
}
}
ext4: add support for lazy inode table initialization When the lazy_itable_init extended option is passed to mke2fs, it considerably speeds up filesystem creation because inode tables are not zeroed out. The fact that parts of the inode table are uninitialized is not a problem so long as the block group descriptors, which contain information regarding how much of the inode table has been initialized, has not been corrupted However, if the block group checksums are not valid, e2fsck must scan the entire inode table, and the the old, uninitialized data could potentially cause e2fsck to report false problems. Hence, it is important for the inode tables to be initialized as soon as possble. This commit adds this feature so that mke2fs can safely use the lazy inode table initialization feature to speed up formatting file systems. This is done via a new new kernel thread called ext4lazyinit, which is created on demand and destroyed, when it is no longer needed. There is only one thread for all ext4 filesystems in the system. When the first filesystem with inititable mount option is mounted, ext4lazyinit thread is created, then the filesystem can register its request in the request list. This thread then walks through the list of requests picking up scheduled requests and invoking ext4_init_inode_table(). Next schedule time for the request is computed by multiplying the time it took to zero out last inode table with wait multiplier, which can be set with the (init_itable=n) mount option (default is 10). We are doing this so we do not take the whole I/O bandwidth. When the thread is no longer necessary (request list is empty) it frees the appropriate structures and exits (and can be created later later by another filesystem). We do not disturb regular inode allocations in any way, it just do not care whether the inode table is, or is not zeroed. But when zeroing, we have to skip used inodes, obviously. Also we should prevent new inode allocations from the group, while zeroing is on the way. For that we take write alloc_sem lock in ext4_init_inode_table() and read alloc_sem in the ext4_claim_inode, so when we are unlucky and allocator hits the group which is currently being zeroed, it just has to wait. This can be suppresed using the mount option no_init_itable. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-28 01:30:05 +00:00
/*
* Handle creation of system zone data early because it can fail.
* Releasing of existing data is done when we are sure remount will
* succeed.
*/
if (test_opt(sb, BLOCK_VALIDITY) && !sbi->s_system_blks) {
err = ext4_setup_system_zone(sb);
if (err)
goto restore_opts;
}
if (sbi->s_journal == NULL && !(old_sb_flags & SB_RDONLY)) {
err = ext4_commit_super(sb);
if (err)
goto restore_opts;
}
#ifdef CONFIG_QUOTA
ext4: make quota as first class supported feature This patch adds support for quotas as a first class feature in ext4; which is to say, the quota files are stored in hidden inodes as file system metadata, instead of as separate files visible in the file system directory hierarchy. It is based on the proposal at: https://ext4.wiki.kernel.org/index.php/Design_For_1st_Class_Quota_in_Ext4 This patch introduces a new feature - EXT4_FEATURE_RO_COMPAT_QUOTA which, when turned on, enables quota accounting at mount time iteself. Also, the quota inodes are stored in two additional superblock fields. Some changes introduced by this patch that should be pointed out are: 1) Two new ext4-superblock fields - s_usr_quota_inum and s_grp_quota_inum for storing the quota inodes in use. 2) Default quota inodes are: inode#3 for tracking userquota and inode#4 for tracking group quota. The superblock fields can be set to use other inodes as well. 3) If the QUOTA feature and corresponding quota inodes are set in superblock, the quota usage tracking is turned on at mount time. On 'quotaon' ioctl, the quota limits enforcement is turned on. 'quotaoff' ioctl turns off only the limits enforcement in this case. 4) When QUOTA feature is in use, the quota mount options 'quota', 'usrquota', 'grpquota' are ignored by the kernel. 5) mke2fs or tune2fs can be used to set the QUOTA feature and initialize quota inodes. The default reserved inodes will not be visible to user as regular files. 6) The quota-tools will need to be modified to support hidden quota files on ext4. E2fsprogs will also include support for creating and fixing quota files. 7) Support is only for the new V2 quota file format. Tested-by: Jan Kara <jack@suse.cz> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Johann Lombardi <johann@whamcloud.com> Signed-off-by: Aditya Kali <adityakali@google.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-07-23 00:21:31 +00:00
if (enable_quota) {
if (sb_any_quota_suspended(sb))
dquot_resume(sb, -1);
else if (ext4_has_feature_quota(sb)) {
ext4: make quota as first class supported feature This patch adds support for quotas as a first class feature in ext4; which is to say, the quota files are stored in hidden inodes as file system metadata, instead of as separate files visible in the file system directory hierarchy. It is based on the proposal at: https://ext4.wiki.kernel.org/index.php/Design_For_1st_Class_Quota_in_Ext4 This patch introduces a new feature - EXT4_FEATURE_RO_COMPAT_QUOTA which, when turned on, enables quota accounting at mount time iteself. Also, the quota inodes are stored in two additional superblock fields. Some changes introduced by this patch that should be pointed out are: 1) Two new ext4-superblock fields - s_usr_quota_inum and s_grp_quota_inum for storing the quota inodes in use. 2) Default quota inodes are: inode#3 for tracking userquota and inode#4 for tracking group quota. The superblock fields can be set to use other inodes as well. 3) If the QUOTA feature and corresponding quota inodes are set in superblock, the quota usage tracking is turned on at mount time. On 'quotaon' ioctl, the quota limits enforcement is turned on. 'quotaoff' ioctl turns off only the limits enforcement in this case. 4) When QUOTA feature is in use, the quota mount options 'quota', 'usrquota', 'grpquota' are ignored by the kernel. 5) mke2fs or tune2fs can be used to set the QUOTA feature and initialize quota inodes. The default reserved inodes will not be visible to user as regular files. 6) The quota-tools will need to be modified to support hidden quota files on ext4. E2fsprogs will also include support for creating and fixing quota files. 7) Support is only for the new V2 quota file format. Tested-by: Jan Kara <jack@suse.cz> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Johann Lombardi <johann@whamcloud.com> Signed-off-by: Aditya Kali <adityakali@google.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-07-23 00:21:31 +00:00
err = ext4_enable_quotas(sb);
if (err)
ext4: make quota as first class supported feature This patch adds support for quotas as a first class feature in ext4; which is to say, the quota files are stored in hidden inodes as file system metadata, instead of as separate files visible in the file system directory hierarchy. It is based on the proposal at: https://ext4.wiki.kernel.org/index.php/Design_For_1st_Class_Quota_in_Ext4 This patch introduces a new feature - EXT4_FEATURE_RO_COMPAT_QUOTA which, when turned on, enables quota accounting at mount time iteself. Also, the quota inodes are stored in two additional superblock fields. Some changes introduced by this patch that should be pointed out are: 1) Two new ext4-superblock fields - s_usr_quota_inum and s_grp_quota_inum for storing the quota inodes in use. 2) Default quota inodes are: inode#3 for tracking userquota and inode#4 for tracking group quota. The superblock fields can be set to use other inodes as well. 3) If the QUOTA feature and corresponding quota inodes are set in superblock, the quota usage tracking is turned on at mount time. On 'quotaon' ioctl, the quota limits enforcement is turned on. 'quotaoff' ioctl turns off only the limits enforcement in this case. 4) When QUOTA feature is in use, the quota mount options 'quota', 'usrquota', 'grpquota' are ignored by the kernel. 5) mke2fs or tune2fs can be used to set the QUOTA feature and initialize quota inodes. The default reserved inodes will not be visible to user as regular files. 6) The quota-tools will need to be modified to support hidden quota files on ext4. E2fsprogs will also include support for creating and fixing quota files. 7) Support is only for the new V2 quota file format. Tested-by: Jan Kara <jack@suse.cz> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Johann Lombardi <johann@whamcloud.com> Signed-off-by: Aditya Kali <adityakali@google.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-07-23 00:21:31 +00:00
goto restore_opts;
}
}
/* Release old quota file names */
for (i = 0; i < EXT4_MAXQUOTAS; i++)
kfree(old_opts.s_qf_names[i]);
#endif
if (!test_opt(sb, BLOCK_VALIDITY) && sbi->s_system_blks)
ext4_release_system_zone(sb);
/*
* Reinitialize lazy itable initialization thread based on
* current settings
*/
if (sb_rdonly(sb) || !test_opt(sb, INIT_INODE_TABLE))
ext4_unregister_li_request(sb);
else {
ext4_group_t first_not_zeroed;
first_not_zeroed = ext4_has_uninit_itable(sb);
ext4_register_li_request(sb, first_not_zeroed);
}
if (!ext4_has_feature_mmp(sb) || sb_rdonly(sb))
ext4_stop_mmpd(sbi);
return 0;
restore_opts:
/*
* If there was a failing r/w to ro transition, we may need to
* re-enable quota
*/
if (sb_rdonly(sb) && !(old_sb_flags & SB_RDONLY) &&
sb_any_quota_suspended(sb))
dquot_resume(sb, -1);
ext4: fix race between writepages and remount We got a WARNING in ext4_add_complete_io: ================================================================== WARNING: at fs/ext4/page-io.c:231 ext4_put_io_end_defer+0x182/0x250 CPU: 10 PID: 77 Comm: ksoftirqd/10 Tainted: 6.3.0-rc2 #85 RIP: 0010:ext4_put_io_end_defer+0x182/0x250 [ext4] [...] Call Trace: <TASK> ext4_end_bio+0xa8/0x240 [ext4] bio_endio+0x195/0x310 blk_update_request+0x184/0x770 scsi_end_request+0x2f/0x240 scsi_io_completion+0x75/0x450 scsi_finish_command+0xef/0x160 scsi_complete+0xa3/0x180 blk_complete_reqs+0x60/0x80 blk_done_softirq+0x25/0x40 __do_softirq+0x119/0x4c8 run_ksoftirqd+0x42/0x70 smpboot_thread_fn+0x136/0x3c0 kthread+0x140/0x1a0 ret_from_fork+0x2c/0x50 ================================================================== Above issue may happen as follows: cpu1 cpu2 ----------------------------|---------------------------- mount -o dioread_lock ext4_writepages ext4_do_writepages *if (ext4_should_dioread_nolock(inode))* // rsv_blocks is not assigned here mount -o remount,dioread_nolock ext4_journal_start_with_reserve __ext4_journal_start __ext4_journal_start_sb jbd2__journal_start *if (rsv_blocks)* // h_rsv_handle is not initialized here mpage_map_and_submit_extent mpage_map_one_extent dioread_nolock = ext4_should_dioread_nolock(inode) if (dioread_nolock && (map->m_flags & EXT4_MAP_UNWRITTEN)) mpd->io_submit.io_end->handle = handle->h_rsv_handle ext4_set_io_unwritten_flag io_end->flag |= EXT4_IO_END_UNWRITTEN // now io_end->handle is NULL but has EXT4_IO_END_UNWRITTEN flag scsi_finish_command scsi_io_completion scsi_io_completion_action scsi_end_request blk_update_request req_bio_endio bio_endio bio->bi_end_io > ext4_end_bio ext4_put_io_end_defer ext4_add_complete_io // trigger WARN_ON(!io_end->handle && sbi->s_journal); The immediate cause of this problem is that ext4_should_dioread_nolock() function returns inconsistent values in the ext4_do_writepages() and mpage_map_one_extent(). There are four conditions in this function that can be changed at mount time to cause this problem. These four conditions can be divided into two categories: (1) journal_data and EXT4_EXTENTS_FL, which can be changed by ioctl (2) DELALLOC and DIOREAD_NOLOCK, which can be changed by remount The two in the first category have been fixed by commit c8585c6fcaf2 ("ext4: fix races between changing inode journal mode and ext4_writepages") and commit cb85f4d23f79 ("ext4: fix race between writepages and enabling EXT4_EXTENTS_FL") respectively. Two cases in the other category have not yet been fixed, and the above issue is caused by this situation. We refer to the fix for the first category, when applying options during remount, we grab s_writepages_rwsem to avoid racing with writepages ops to trigger this problem. Fixes: 6b523df4fb5a ("ext4: use transaction reservation for extent conversion in ext4_end_io") Cc: stable@vger.kernel.org Signed-off-by: Baokun Li <libaokun1@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20230524072538.2883391-1-libaokun1@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2023-05-24 07:25:38 +00:00
alloc_ctx = ext4_writepages_down_write(sb);
sb->s_flags = old_sb_flags;
sbi->s_mount_opt = old_opts.s_mount_opt;
sbi->s_mount_opt2 = old_opts.s_mount_opt2;
sbi->s_resuid = old_opts.s_resuid;
sbi->s_resgid = old_opts.s_resgid;
sbi->s_commit_interval = old_opts.s_commit_interval;
sbi->s_min_batch_time = old_opts.s_min_batch_time;
sbi->s_max_batch_time = old_opts.s_max_batch_time;
ext4: fix race between writepages and remount We got a WARNING in ext4_add_complete_io: ================================================================== WARNING: at fs/ext4/page-io.c:231 ext4_put_io_end_defer+0x182/0x250 CPU: 10 PID: 77 Comm: ksoftirqd/10 Tainted: 6.3.0-rc2 #85 RIP: 0010:ext4_put_io_end_defer+0x182/0x250 [ext4] [...] Call Trace: <TASK> ext4_end_bio+0xa8/0x240 [ext4] bio_endio+0x195/0x310 blk_update_request+0x184/0x770 scsi_end_request+0x2f/0x240 scsi_io_completion+0x75/0x450 scsi_finish_command+0xef/0x160 scsi_complete+0xa3/0x180 blk_complete_reqs+0x60/0x80 blk_done_softirq+0x25/0x40 __do_softirq+0x119/0x4c8 run_ksoftirqd+0x42/0x70 smpboot_thread_fn+0x136/0x3c0 kthread+0x140/0x1a0 ret_from_fork+0x2c/0x50 ================================================================== Above issue may happen as follows: cpu1 cpu2 ----------------------------|---------------------------- mount -o dioread_lock ext4_writepages ext4_do_writepages *if (ext4_should_dioread_nolock(inode))* // rsv_blocks is not assigned here mount -o remount,dioread_nolock ext4_journal_start_with_reserve __ext4_journal_start __ext4_journal_start_sb jbd2__journal_start *if (rsv_blocks)* // h_rsv_handle is not initialized here mpage_map_and_submit_extent mpage_map_one_extent dioread_nolock = ext4_should_dioread_nolock(inode) if (dioread_nolock && (map->m_flags & EXT4_MAP_UNWRITTEN)) mpd->io_submit.io_end->handle = handle->h_rsv_handle ext4_set_io_unwritten_flag io_end->flag |= EXT4_IO_END_UNWRITTEN // now io_end->handle is NULL but has EXT4_IO_END_UNWRITTEN flag scsi_finish_command scsi_io_completion scsi_io_completion_action scsi_end_request blk_update_request req_bio_endio bio_endio bio->bi_end_io > ext4_end_bio ext4_put_io_end_defer ext4_add_complete_io // trigger WARN_ON(!io_end->handle && sbi->s_journal); The immediate cause of this problem is that ext4_should_dioread_nolock() function returns inconsistent values in the ext4_do_writepages() and mpage_map_one_extent(). There are four conditions in this function that can be changed at mount time to cause this problem. These four conditions can be divided into two categories: (1) journal_data and EXT4_EXTENTS_FL, which can be changed by ioctl (2) DELALLOC and DIOREAD_NOLOCK, which can be changed by remount The two in the first category have been fixed by commit c8585c6fcaf2 ("ext4: fix races between changing inode journal mode and ext4_writepages") and commit cb85f4d23f79 ("ext4: fix race between writepages and enabling EXT4_EXTENTS_FL") respectively. Two cases in the other category have not yet been fixed, and the above issue is caused by this situation. We refer to the fix for the first category, when applying options during remount, we grab s_writepages_rwsem to avoid racing with writepages ops to trigger this problem. Fixes: 6b523df4fb5a ("ext4: use transaction reservation for extent conversion in ext4_end_io") Cc: stable@vger.kernel.org Signed-off-by: Baokun Li <libaokun1@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20230524072538.2883391-1-libaokun1@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2023-05-24 07:25:38 +00:00
ext4_writepages_up_write(sb, alloc_ctx);
if (!test_opt(sb, BLOCK_VALIDITY) && sbi->s_system_blks)
ext4_release_system_zone(sb);
#ifdef CONFIG_QUOTA
sbi->s_jquota_fmt = old_opts.s_jquota_fmt;
for (i = 0; i < EXT4_MAXQUOTAS; i++) {
to_free[i] = get_qf_name(sb, sbi, i);
rcu_assign_pointer(sbi->s_qf_names[i], old_opts.s_qf_names[i]);
}
synchronize_rcu();
for (i = 0; i < EXT4_MAXQUOTAS; i++)
kfree(to_free[i]);
#endif
if (!ext4_has_feature_mmp(sb) || sb_rdonly(sb))
ext4_stop_mmpd(sbi);
return err;
}
static int ext4_reconfigure(struct fs_context *fc)
ext4: Completely separate options parsing and sb setup The new mount api separates option parsing and super block setup into two distinct steps and so we need to separate the options parsing out of the ext4_fill_super() and ext4_remount(). In order to achieve this we have to create new ext4_fill_super() and ext4_remount() functions which will serve its purpose only until we actually do convert to the new api (as such they are only temporary for this patch series) and move the option parsing out of the old function which will now be renamed to __ext4_fill_super() and __ext4_remount(). There is a small complication in the fact that while the mount option parsing is going to happen before we get to __ext4_fill_super(), the mount options stored in the super block itself needs to be applied first, before the user specified mount options. So with this patch we're going through the following sequence: - parse user provided options (including sb block) - initialize sbi and store s_sb_block if provided - in __ext4_fill_super() - read the super block - parse and apply options specified in s_mount_opts - check and apply user provided options stored in ctx - continue with the regular ext4_fill_super operation It's not exactly the most elegant solution, but if we still want to support s_mount_opts we have to do it in this order. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Link: https://lore.kernel.org/r/20211027141857.33657-10-lczerner@redhat.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2021-10-27 14:18:53 +00:00
{
struct super_block *sb = fc->root->d_sb;
ext4: Completely separate options parsing and sb setup The new mount api separates option parsing and super block setup into two distinct steps and so we need to separate the options parsing out of the ext4_fill_super() and ext4_remount(). In order to achieve this we have to create new ext4_fill_super() and ext4_remount() functions which will serve its purpose only until we actually do convert to the new api (as such they are only temporary for this patch series) and move the option parsing out of the old function which will now be renamed to __ext4_fill_super() and __ext4_remount(). There is a small complication in the fact that while the mount option parsing is going to happen before we get to __ext4_fill_super(), the mount options stored in the super block itself needs to be applied first, before the user specified mount options. So with this patch we're going through the following sequence: - parse user provided options (including sb block) - initialize sbi and store s_sb_block if provided - in __ext4_fill_super() - read the super block - parse and apply options specified in s_mount_opts - check and apply user provided options stored in ctx - continue with the regular ext4_fill_super operation It's not exactly the most elegant solution, but if we still want to support s_mount_opts we have to do it in this order. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Link: https://lore.kernel.org/r/20211027141857.33657-10-lczerner@redhat.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2021-10-27 14:18:53 +00:00
int ret;
fc->s_fs_info = EXT4_SB(sb);
ext4: Completely separate options parsing and sb setup The new mount api separates option parsing and super block setup into two distinct steps and so we need to separate the options parsing out of the ext4_fill_super() and ext4_remount(). In order to achieve this we have to create new ext4_fill_super() and ext4_remount() functions which will serve its purpose only until we actually do convert to the new api (as such they are only temporary for this patch series) and move the option parsing out of the old function which will now be renamed to __ext4_fill_super() and __ext4_remount(). There is a small complication in the fact that while the mount option parsing is going to happen before we get to __ext4_fill_super(), the mount options stored in the super block itself needs to be applied first, before the user specified mount options. So with this patch we're going through the following sequence: - parse user provided options (including sb block) - initialize sbi and store s_sb_block if provided - in __ext4_fill_super() - read the super block - parse and apply options specified in s_mount_opts - check and apply user provided options stored in ctx - continue with the regular ext4_fill_super operation It's not exactly the most elegant solution, but if we still want to support s_mount_opts we have to do it in this order. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Link: https://lore.kernel.org/r/20211027141857.33657-10-lczerner@redhat.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2021-10-27 14:18:53 +00:00
ret = ext4_check_opt_consistency(fc, sb);
ext4: Completely separate options parsing and sb setup The new mount api separates option parsing and super block setup into two distinct steps and so we need to separate the options parsing out of the ext4_fill_super() and ext4_remount(). In order to achieve this we have to create new ext4_fill_super() and ext4_remount() functions which will serve its purpose only until we actually do convert to the new api (as such they are only temporary for this patch series) and move the option parsing out of the old function which will now be renamed to __ext4_fill_super() and __ext4_remount(). There is a small complication in the fact that while the mount option parsing is going to happen before we get to __ext4_fill_super(), the mount options stored in the super block itself needs to be applied first, before the user specified mount options. So with this patch we're going through the following sequence: - parse user provided options (including sb block) - initialize sbi and store s_sb_block if provided - in __ext4_fill_super() - read the super block - parse and apply options specified in s_mount_opts - check and apply user provided options stored in ctx - continue with the regular ext4_fill_super operation It's not exactly the most elegant solution, but if we still want to support s_mount_opts we have to do it in this order. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Link: https://lore.kernel.org/r/20211027141857.33657-10-lczerner@redhat.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2021-10-27 14:18:53 +00:00
if (ret < 0)
return ret;
ext4: Completely separate options parsing and sb setup The new mount api separates option parsing and super block setup into two distinct steps and so we need to separate the options parsing out of the ext4_fill_super() and ext4_remount(). In order to achieve this we have to create new ext4_fill_super() and ext4_remount() functions which will serve its purpose only until we actually do convert to the new api (as such they are only temporary for this patch series) and move the option parsing out of the old function which will now be renamed to __ext4_fill_super() and __ext4_remount(). There is a small complication in the fact that while the mount option parsing is going to happen before we get to __ext4_fill_super(), the mount options stored in the super block itself needs to be applied first, before the user specified mount options. So with this patch we're going through the following sequence: - parse user provided options (including sb block) - initialize sbi and store s_sb_block if provided - in __ext4_fill_super() - read the super block - parse and apply options specified in s_mount_opts - check and apply user provided options stored in ctx - continue with the regular ext4_fill_super operation It's not exactly the most elegant solution, but if we still want to support s_mount_opts we have to do it in this order. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Link: https://lore.kernel.org/r/20211027141857.33657-10-lczerner@redhat.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2021-10-27 14:18:53 +00:00
ret = __ext4_remount(fc, sb);
ext4: Completely separate options parsing and sb setup The new mount api separates option parsing and super block setup into two distinct steps and so we need to separate the options parsing out of the ext4_fill_super() and ext4_remount(). In order to achieve this we have to create new ext4_fill_super() and ext4_remount() functions which will serve its purpose only until we actually do convert to the new api (as such they are only temporary for this patch series) and move the option parsing out of the old function which will now be renamed to __ext4_fill_super() and __ext4_remount(). There is a small complication in the fact that while the mount option parsing is going to happen before we get to __ext4_fill_super(), the mount options stored in the super block itself needs to be applied first, before the user specified mount options. So with this patch we're going through the following sequence: - parse user provided options (including sb block) - initialize sbi and store s_sb_block if provided - in __ext4_fill_super() - read the super block - parse and apply options specified in s_mount_opts - check and apply user provided options stored in ctx - continue with the regular ext4_fill_super operation It's not exactly the most elegant solution, but if we still want to support s_mount_opts we have to do it in this order. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Link: https://lore.kernel.org/r/20211027141857.33657-10-lczerner@redhat.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2021-10-27 14:18:53 +00:00
if (ret < 0)
return ret;
ext4: Completely separate options parsing and sb setup The new mount api separates option parsing and super block setup into two distinct steps and so we need to separate the options parsing out of the ext4_fill_super() and ext4_remount(). In order to achieve this we have to create new ext4_fill_super() and ext4_remount() functions which will serve its purpose only until we actually do convert to the new api (as such they are only temporary for this patch series) and move the option parsing out of the old function which will now be renamed to __ext4_fill_super() and __ext4_remount(). There is a small complication in the fact that while the mount option parsing is going to happen before we get to __ext4_fill_super(), the mount options stored in the super block itself needs to be applied first, before the user specified mount options. So with this patch we're going through the following sequence: - parse user provided options (including sb block) - initialize sbi and store s_sb_block if provided - in __ext4_fill_super() - read the super block - parse and apply options specified in s_mount_opts - check and apply user provided options stored in ctx - continue with the regular ext4_fill_super operation It's not exactly the most elegant solution, but if we still want to support s_mount_opts we have to do it in this order. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Link: https://lore.kernel.org/r/20211027141857.33657-10-lczerner@redhat.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2021-10-27 14:18:53 +00:00
ext4_msg(sb, KERN_INFO, "re-mounted %pU %s. Quota mode: %s.",
&sb->s_uuid, sb_rdonly(sb) ? "ro" : "r/w",
ext4_quota_mode(sb));
ext4: Completely separate options parsing and sb setup The new mount api separates option parsing and super block setup into two distinct steps and so we need to separate the options parsing out of the ext4_fill_super() and ext4_remount(). In order to achieve this we have to create new ext4_fill_super() and ext4_remount() functions which will serve its purpose only until we actually do convert to the new api (as such they are only temporary for this patch series) and move the option parsing out of the old function which will now be renamed to __ext4_fill_super() and __ext4_remount(). There is a small complication in the fact that while the mount option parsing is going to happen before we get to __ext4_fill_super(), the mount options stored in the super block itself needs to be applied first, before the user specified mount options. So with this patch we're going through the following sequence: - parse user provided options (including sb block) - initialize sbi and store s_sb_block if provided - in __ext4_fill_super() - read the super block - parse and apply options specified in s_mount_opts - check and apply user provided options stored in ctx - continue with the regular ext4_fill_super operation It's not exactly the most elegant solution, but if we still want to support s_mount_opts we have to do it in this order. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Link: https://lore.kernel.org/r/20211027141857.33657-10-lczerner@redhat.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2021-10-27 14:18:53 +00:00
return 0;
}
#ifdef CONFIG_QUOTA
static int ext4_statfs_project(struct super_block *sb,
kprojid_t projid, struct kstatfs *buf)
{
struct kqid qid;
struct dquot *dquot;
u64 limit;
u64 curblock;
qid = make_kqid_projid(projid);
dquot = dqget(sb, qid);
if (IS_ERR(dquot))
return PTR_ERR(dquot);
spin_lock(&dquot->dq_dqb_lock);
limit = min_not_zero(dquot->dq_dqb.dqb_bsoftlimit,
dquot->dq_dqb.dqb_bhardlimit);
2019-10-16 02:25:01 +00:00
limit >>= sb->s_blocksize_bits;
if (limit && buf->f_blocks > limit) {
curblock = (dquot->dq_dqb.dqb_curspace +
dquot->dq_dqb.dqb_rsvspace) >> sb->s_blocksize_bits;
buf->f_blocks = limit;
buf->f_bfree = buf->f_bavail =
(buf->f_blocks > curblock) ?
(buf->f_blocks - curblock) : 0;
}
limit = min_not_zero(dquot->dq_dqb.dqb_isoftlimit,
dquot->dq_dqb.dqb_ihardlimit);
if (limit && buf->f_files > limit) {
buf->f_files = limit;
buf->f_ffree =
(buf->f_files > dquot->dq_dqb.dqb_curinodes) ?
(buf->f_files - dquot->dq_dqb.dqb_curinodes) : 0;
}
spin_unlock(&dquot->dq_dqb_lock);
dqput(dquot);
return 0;
}
#endif
static int ext4_statfs(struct dentry *dentry, struct kstatfs *buf)
{
struct super_block *sb = dentry->d_sb;
struct ext4_sb_info *sbi = EXT4_SB(sb);
struct ext4_super_block *es = sbi->s_es;
ext4: introduce reserved space Currently in ENOSPC condition when writing into unwritten space, or punching a hole, we might need to split the extent and grow extent tree. However since we can not allocate any new metadata blocks we'll have to zero out unwritten part of extent or punched out part of extent, or in the worst case return ENOSPC even though use actually does not allocate any space. Also in delalloc path we do reserve metadata and data blocks for the time we're going to write out, however metadata block reservation is very tricky especially since we expect that logical connectivity implies physical connectivity, however that might not be the case and hence we might end up allocating more metadata blocks than previously reserved. So in future, metadata reservation checks should be removed since we can not assure that we do not under reserve. And this is where reserved space comes into the picture. When mounting the file system we slice off a little bit of the file system space (2% or 4096 clusters, whichever is smaller) which can be then used for the cases mentioned above to prevent costly zeroout, or unexpected ENOSPC. The number of reserved clusters can be set via sysfs, however it can never be bigger than number of free clusters in the file system. Note that this patch fixes the failure of xfstest 274 as expected. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
2013-04-10 02:11:22 +00:00
ext4_fsblk_t overhead = 0, resv_blocks;
s64 bfree;
ext4: introduce reserved space Currently in ENOSPC condition when writing into unwritten space, or punching a hole, we might need to split the extent and grow extent tree. However since we can not allocate any new metadata blocks we'll have to zero out unwritten part of extent or punched out part of extent, or in the worst case return ENOSPC even though use actually does not allocate any space. Also in delalloc path we do reserve metadata and data blocks for the time we're going to write out, however metadata block reservation is very tricky especially since we expect that logical connectivity implies physical connectivity, however that might not be the case and hence we might end up allocating more metadata blocks than previously reserved. So in future, metadata reservation checks should be removed since we can not assure that we do not under reserve. And this is where reserved space comes into the picture. When mounting the file system we slice off a little bit of the file system space (2% or 4096 clusters, whichever is smaller) which can be then used for the cases mentioned above to prevent costly zeroout, or unexpected ENOSPC. The number of reserved clusters can be set via sysfs, however it can never be bigger than number of free clusters in the file system. Note that this patch fixes the failure of xfstest 274 as expected. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
2013-04-10 02:11:22 +00:00
resv_blocks = EXT4_C2B(sbi, atomic64_read(&sbi->s_resv_clusters));
if (!test_opt(sb, MINIX_DF))
overhead = sbi->s_overhead;
buf->f_type = EXT4_SUPER_MAGIC;
buf->f_bsize = sb->s_blocksize;
buf->f_blocks = ext4_blocks_count(es) - EXT4_C2B(sbi, overhead);
bfree = percpu_counter_sum_positive(&sbi->s_freeclusters_counter) -
percpu_counter_sum_positive(&sbi->s_dirtyclusters_counter);
/* prevent underflow in case that few free space is available */
buf->f_bfree = EXT4_C2B(sbi, max_t(s64, bfree, 0));
ext4: introduce reserved space Currently in ENOSPC condition when writing into unwritten space, or punching a hole, we might need to split the extent and grow extent tree. However since we can not allocate any new metadata blocks we'll have to zero out unwritten part of extent or punched out part of extent, or in the worst case return ENOSPC even though use actually does not allocate any space. Also in delalloc path we do reserve metadata and data blocks for the time we're going to write out, however metadata block reservation is very tricky especially since we expect that logical connectivity implies physical connectivity, however that might not be the case and hence we might end up allocating more metadata blocks than previously reserved. So in future, metadata reservation checks should be removed since we can not assure that we do not under reserve. And this is where reserved space comes into the picture. When mounting the file system we slice off a little bit of the file system space (2% or 4096 clusters, whichever is smaller) which can be then used for the cases mentioned above to prevent costly zeroout, or unexpected ENOSPC. The number of reserved clusters can be set via sysfs, however it can never be bigger than number of free clusters in the file system. Note that this patch fixes the failure of xfstest 274 as expected. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
2013-04-10 02:11:22 +00:00
buf->f_bavail = buf->f_bfree -
(ext4_r_blocks_count(es) + resv_blocks);
if (buf->f_bfree < (ext4_r_blocks_count(es) + resv_blocks))
buf->f_bavail = 0;
buf->f_files = le32_to_cpu(es->s_inodes_count);
buf->f_ffree = percpu_counter_sum_positive(&sbi->s_freeinodes_counter);
buf->f_namelen = EXT4_NAME_LEN;
buf->f_fsid = uuid_to_fsid(es->s_uuid);
#ifdef CONFIG_QUOTA
if (ext4_test_inode_flag(dentry->d_inode, EXT4_INODE_PROJINHERIT) &&
sb_has_quota_limits_enabled(sb, PRJQUOTA))
ext4_statfs_project(sb, EXT4_I(dentry->d_inode)->i_projid, buf);
#endif
return 0;
}
#ifdef CONFIG_QUOTA
/*
* Helper functions so that transaction is started before we acquire dqio_sem
* to keep correct lock ordering of transaction > dqio_sem
*/
static inline struct inode *dquot_to_inode(struct dquot *dquot)
{
return sb_dqopt(dquot->dq_sb)->files[dquot->dq_id.type];
}
static int ext4_write_dquot(struct dquot *dquot)
{
int ret, err;
handle_t *handle;
struct inode *inode;
inode = dquot_to_inode(dquot);
handle = ext4_journal_start(inode, EXT4_HT_QUOTA,
EXT4_QUOTA_TRANS_BLOCKS(dquot->dq_sb));
if (IS_ERR(handle))
return PTR_ERR(handle);
ret = dquot_commit(dquot);
if (ret < 0)
ext4_error_err(dquot->dq_sb, -ret,
"Failed to commit dquot type %d",
dquot->dq_id.type);
err = ext4_journal_stop(handle);
if (!ret)
ret = err;
return ret;
}
static int ext4_acquire_dquot(struct dquot *dquot)
{
int ret, err;
handle_t *handle;
handle = ext4_journal_start(dquot_to_inode(dquot), EXT4_HT_QUOTA,
EXT4_QUOTA_INIT_BLOCKS(dquot->dq_sb));
if (IS_ERR(handle))
return PTR_ERR(handle);
ret = dquot_acquire(dquot);
if (ret < 0)
ext4_error_err(dquot->dq_sb, -ret,
"Failed to acquire dquot type %d",
dquot->dq_id.type);
err = ext4_journal_stop(handle);
if (!ret)
ret = err;
return ret;
}
static int ext4_release_dquot(struct dquot *dquot)
{
int ret, err;
handle_t *handle;
handle = ext4_journal_start(dquot_to_inode(dquot), EXT4_HT_QUOTA,
EXT4_QUOTA_DEL_BLOCKS(dquot->dq_sb));
if (IS_ERR(handle)) {
/* Release dquot anyway to avoid endless cycle in dqput() */
dquot_release(dquot);
return PTR_ERR(handle);
}
ret = dquot_release(dquot);
if (ret < 0)
ext4_error_err(dquot->dq_sb, -ret,
"Failed to release dquot type %d",
dquot->dq_id.type);
err = ext4_journal_stop(handle);
if (!ret)
ret = err;
return ret;
}
static int ext4_mark_dquot_dirty(struct dquot *dquot)
{
struct super_block *sb = dquot->dq_sb;
if (ext4_is_quota_journalled(sb)) {
dquot_mark_dquot_dirty(dquot);
return ext4_write_dquot(dquot);
} else {
return dquot_mark_dquot_dirty(dquot);
}
}
static int ext4_write_info(struct super_block *sb, int type)
{
int ret, err;
handle_t *handle;
/* Data block + inode block */
ext4: fix null-ptr-deref in ext4_write_info I caught a null-ptr-deref bug as follows: ================================================================== KASAN: null-ptr-deref in range [0x0000000000000068-0x000000000000006f] CPU: 1 PID: 1589 Comm: umount Not tainted 5.10.0-02219-dirty #339 RIP: 0010:ext4_write_info+0x53/0x1b0 [...] Call Trace: dquot_writeback_dquots+0x341/0x9a0 ext4_sync_fs+0x19e/0x800 __sync_filesystem+0x83/0x100 sync_filesystem+0x89/0xf0 generic_shutdown_super+0x79/0x3e0 kill_block_super+0xa1/0x110 deactivate_locked_super+0xac/0x130 deactivate_super+0xb6/0xd0 cleanup_mnt+0x289/0x400 __cleanup_mnt+0x16/0x20 task_work_run+0x11c/0x1c0 exit_to_user_mode_prepare+0x203/0x210 syscall_exit_to_user_mode+0x5b/0x3a0 do_syscall_64+0x59/0x70 entry_SYSCALL_64_after_hwframe+0x44/0xa9 ================================================================== Above issue may happen as follows: ------------------------------------- exit_to_user_mode_prepare task_work_run __cleanup_mnt cleanup_mnt deactivate_super deactivate_locked_super kill_block_super generic_shutdown_super shrink_dcache_for_umount dentry = sb->s_root sb->s_root = NULL <--- Here set NULL sync_filesystem __sync_filesystem sb->s_op->sync_fs > ext4_sync_fs dquot_writeback_dquots sb->dq_op->write_info > ext4_write_info ext4_journal_start(d_inode(sb->s_root), EXT4_HT_QUOTA, 2) d_inode(sb->s_root) s_root->d_inode <--- Null pointer dereference To solve this problem, we use ext4_journal_start_sb directly to avoid s_root being used. Cc: stable@kernel.org Signed-off-by: Baokun Li <libaokun1@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20220805123947.565152-1-libaokun1@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2022-08-05 12:39:47 +00:00
handle = ext4_journal_start_sb(sb, EXT4_HT_QUOTA, 2);
if (IS_ERR(handle))
return PTR_ERR(handle);
ret = dquot_commit_info(sb, type);
err = ext4_journal_stop(handle);
if (!ret)
ret = err;
return ret;
}
static void lockdep_set_quota_inode(struct inode *inode, int subclass)
{
struct ext4_inode_info *ei = EXT4_I(inode);
/* The first argument of lockdep_set_subclass has to be
* *exactly* the same as the argument to init_rwsem() --- in
* this case, in init_once() --- or lockdep gets unhappy
* because the name of the lock is set using the
* stringification of the argument to init_rwsem().
*/
(void) ei; /* shut up clang warning if !CONFIG_LOCKDEP */
lockdep_set_subclass(&ei->i_data_sem, subclass);
}
/*
* Standard function to be called on quota_on
*/
static int ext4_quota_on(struct super_block *sb, int type, int format_id,
const struct path *path)
{
int err;
if (!test_opt(sb, QUOTA))
return -EINVAL;
/* Quotafile not on the same filesystem? */
if (path->dentry->d_sb != sb)
return -EXDEV;
/* Quota already enabled for this file? */
if (IS_NOQUOTA(d_inode(path->dentry)))
return -EBUSY;
/* Journaling quota? */
if (EXT4_SB(sb)->s_qf_names[type]) {
/* Quotafile not in fs root? */
if (path->dentry->d_parent != sb->s_root)
ext4_msg(sb, KERN_WARNING,
"Quota file not on filesystem root. "
"Journaled quota will not work");
sb_dqopt(sb)->flags |= DQUOT_NOLIST_DIRTY;
} else {
/*
* Clear the flag just in case mount options changed since
* last time.
*/
sb_dqopt(sb)->flags &= ~DQUOT_NOLIST_DIRTY;
}
lockdep_set_quota_inode(path->dentry->d_inode, I_DATA_SEM_QUOTA);
err = dquot_quota_on(sb, type, format_id, path);
if (!err) {
struct inode *inode = d_inode(path->dentry);
handle_t *handle;
/*
* Set inode flags to prevent userspace from messing with quota
* files. If this fails, we return success anyway since quotas
* are already enabled and this is not a hard failure.
*/
inode_lock(inode);
handle = ext4_journal_start(inode, EXT4_HT_QUOTA, 1);
if (IS_ERR(handle))
goto unlock_inode;
EXT4_I(inode)->i_flags |= EXT4_NOATIME_FL | EXT4_IMMUTABLE_FL;
inode_set_flags(inode, S_NOATIME | S_IMMUTABLE,
S_NOATIME | S_IMMUTABLE);
err = ext4_mark_inode_dirty(handle, inode);
ext4_journal_stop(handle);
unlock_inode:
inode_unlock(inode);
if (err)
dquot_quota_off(sb, type);
}
if (err)
lockdep_set_quota_inode(path->dentry->d_inode,
I_DATA_SEM_NORMAL);
return err;
}
static inline bool ext4_check_quota_inum(int type, unsigned long qf_inum)
{
switch (type) {
case USRQUOTA:
return qf_inum == EXT4_USR_QUOTA_INO;
case GRPQUOTA:
return qf_inum == EXT4_GRP_QUOTA_INO;
case PRJQUOTA:
return qf_inum >= EXT4_GOOD_OLD_FIRST_INO;
default:
BUG();
}
}
ext4: make quota as first class supported feature This patch adds support for quotas as a first class feature in ext4; which is to say, the quota files are stored in hidden inodes as file system metadata, instead of as separate files visible in the file system directory hierarchy. It is based on the proposal at: https://ext4.wiki.kernel.org/index.php/Design_For_1st_Class_Quota_in_Ext4 This patch introduces a new feature - EXT4_FEATURE_RO_COMPAT_QUOTA which, when turned on, enables quota accounting at mount time iteself. Also, the quota inodes are stored in two additional superblock fields. Some changes introduced by this patch that should be pointed out are: 1) Two new ext4-superblock fields - s_usr_quota_inum and s_grp_quota_inum for storing the quota inodes in use. 2) Default quota inodes are: inode#3 for tracking userquota and inode#4 for tracking group quota. The superblock fields can be set to use other inodes as well. 3) If the QUOTA feature and corresponding quota inodes are set in superblock, the quota usage tracking is turned on at mount time. On 'quotaon' ioctl, the quota limits enforcement is turned on. 'quotaoff' ioctl turns off only the limits enforcement in this case. 4) When QUOTA feature is in use, the quota mount options 'quota', 'usrquota', 'grpquota' are ignored by the kernel. 5) mke2fs or tune2fs can be used to set the QUOTA feature and initialize quota inodes. The default reserved inodes will not be visible to user as regular files. 6) The quota-tools will need to be modified to support hidden quota files on ext4. E2fsprogs will also include support for creating and fixing quota files. 7) Support is only for the new V2 quota file format. Tested-by: Jan Kara <jack@suse.cz> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Johann Lombardi <johann@whamcloud.com> Signed-off-by: Aditya Kali <adityakali@google.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-07-23 00:21:31 +00:00
static int ext4_quota_enable(struct super_block *sb, int type, int format_id,
unsigned int flags)
{
int err;
struct inode *qf_inode;
unsigned long qf_inums[EXT4_MAXQUOTAS] = {
ext4: make quota as first class supported feature This patch adds support for quotas as a first class feature in ext4; which is to say, the quota files are stored in hidden inodes as file system metadata, instead of as separate files visible in the file system directory hierarchy. It is based on the proposal at: https://ext4.wiki.kernel.org/index.php/Design_For_1st_Class_Quota_in_Ext4 This patch introduces a new feature - EXT4_FEATURE_RO_COMPAT_QUOTA which, when turned on, enables quota accounting at mount time iteself. Also, the quota inodes are stored in two additional superblock fields. Some changes introduced by this patch that should be pointed out are: 1) Two new ext4-superblock fields - s_usr_quota_inum and s_grp_quota_inum for storing the quota inodes in use. 2) Default quota inodes are: inode#3 for tracking userquota and inode#4 for tracking group quota. The superblock fields can be set to use other inodes as well. 3) If the QUOTA feature and corresponding quota inodes are set in superblock, the quota usage tracking is turned on at mount time. On 'quotaon' ioctl, the quota limits enforcement is turned on. 'quotaoff' ioctl turns off only the limits enforcement in this case. 4) When QUOTA feature is in use, the quota mount options 'quota', 'usrquota', 'grpquota' are ignored by the kernel. 5) mke2fs or tune2fs can be used to set the QUOTA feature and initialize quota inodes. The default reserved inodes will not be visible to user as regular files. 6) The quota-tools will need to be modified to support hidden quota files on ext4. E2fsprogs will also include support for creating and fixing quota files. 7) Support is only for the new V2 quota file format. Tested-by: Jan Kara <jack@suse.cz> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Johann Lombardi <johann@whamcloud.com> Signed-off-by: Aditya Kali <adityakali@google.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-07-23 00:21:31 +00:00
le32_to_cpu(EXT4_SB(sb)->s_es->s_usr_quota_inum),
le32_to_cpu(EXT4_SB(sb)->s_es->s_grp_quota_inum),
le32_to_cpu(EXT4_SB(sb)->s_es->s_prj_quota_inum)
ext4: make quota as first class supported feature This patch adds support for quotas as a first class feature in ext4; which is to say, the quota files are stored in hidden inodes as file system metadata, instead of as separate files visible in the file system directory hierarchy. It is based on the proposal at: https://ext4.wiki.kernel.org/index.php/Design_For_1st_Class_Quota_in_Ext4 This patch introduces a new feature - EXT4_FEATURE_RO_COMPAT_QUOTA which, when turned on, enables quota accounting at mount time iteself. Also, the quota inodes are stored in two additional superblock fields. Some changes introduced by this patch that should be pointed out are: 1) Two new ext4-superblock fields - s_usr_quota_inum and s_grp_quota_inum for storing the quota inodes in use. 2) Default quota inodes are: inode#3 for tracking userquota and inode#4 for tracking group quota. The superblock fields can be set to use other inodes as well. 3) If the QUOTA feature and corresponding quota inodes are set in superblock, the quota usage tracking is turned on at mount time. On 'quotaon' ioctl, the quota limits enforcement is turned on. 'quotaoff' ioctl turns off only the limits enforcement in this case. 4) When QUOTA feature is in use, the quota mount options 'quota', 'usrquota', 'grpquota' are ignored by the kernel. 5) mke2fs or tune2fs can be used to set the QUOTA feature and initialize quota inodes. The default reserved inodes will not be visible to user as regular files. 6) The quota-tools will need to be modified to support hidden quota files on ext4. E2fsprogs will also include support for creating and fixing quota files. 7) Support is only for the new V2 quota file format. Tested-by: Jan Kara <jack@suse.cz> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Johann Lombardi <johann@whamcloud.com> Signed-off-by: Aditya Kali <adityakali@google.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-07-23 00:21:31 +00:00
};
BUG_ON(!ext4_has_feature_quota(sb));
ext4: make quota as first class supported feature This patch adds support for quotas as a first class feature in ext4; which is to say, the quota files are stored in hidden inodes as file system metadata, instead of as separate files visible in the file system directory hierarchy. It is based on the proposal at: https://ext4.wiki.kernel.org/index.php/Design_For_1st_Class_Quota_in_Ext4 This patch introduces a new feature - EXT4_FEATURE_RO_COMPAT_QUOTA which, when turned on, enables quota accounting at mount time iteself. Also, the quota inodes are stored in two additional superblock fields. Some changes introduced by this patch that should be pointed out are: 1) Two new ext4-superblock fields - s_usr_quota_inum and s_grp_quota_inum for storing the quota inodes in use. 2) Default quota inodes are: inode#3 for tracking userquota and inode#4 for tracking group quota. The superblock fields can be set to use other inodes as well. 3) If the QUOTA feature and corresponding quota inodes are set in superblock, the quota usage tracking is turned on at mount time. On 'quotaon' ioctl, the quota limits enforcement is turned on. 'quotaoff' ioctl turns off only the limits enforcement in this case. 4) When QUOTA feature is in use, the quota mount options 'quota', 'usrquota', 'grpquota' are ignored by the kernel. 5) mke2fs or tune2fs can be used to set the QUOTA feature and initialize quota inodes. The default reserved inodes will not be visible to user as regular files. 6) The quota-tools will need to be modified to support hidden quota files on ext4. E2fsprogs will also include support for creating and fixing quota files. 7) Support is only for the new V2 quota file format. Tested-by: Jan Kara <jack@suse.cz> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Johann Lombardi <johann@whamcloud.com> Signed-off-by: Aditya Kali <adityakali@google.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-07-23 00:21:31 +00:00
if (!qf_inums[type])
return -EPERM;
if (!ext4_check_quota_inum(type, qf_inums[type])) {
ext4_error(sb, "Bad quota inum: %lu, type: %d",
qf_inums[type], type);
return -EUCLEAN;
}
qf_inode = ext4_iget(sb, qf_inums[type], EXT4_IGET_SPECIAL);
ext4: make quota as first class supported feature This patch adds support for quotas as a first class feature in ext4; which is to say, the quota files are stored in hidden inodes as file system metadata, instead of as separate files visible in the file system directory hierarchy. It is based on the proposal at: https://ext4.wiki.kernel.org/index.php/Design_For_1st_Class_Quota_in_Ext4 This patch introduces a new feature - EXT4_FEATURE_RO_COMPAT_QUOTA which, when turned on, enables quota accounting at mount time iteself. Also, the quota inodes are stored in two additional superblock fields. Some changes introduced by this patch that should be pointed out are: 1) Two new ext4-superblock fields - s_usr_quota_inum and s_grp_quota_inum for storing the quota inodes in use. 2) Default quota inodes are: inode#3 for tracking userquota and inode#4 for tracking group quota. The superblock fields can be set to use other inodes as well. 3) If the QUOTA feature and corresponding quota inodes are set in superblock, the quota usage tracking is turned on at mount time. On 'quotaon' ioctl, the quota limits enforcement is turned on. 'quotaoff' ioctl turns off only the limits enforcement in this case. 4) When QUOTA feature is in use, the quota mount options 'quota', 'usrquota', 'grpquota' are ignored by the kernel. 5) mke2fs or tune2fs can be used to set the QUOTA feature and initialize quota inodes. The default reserved inodes will not be visible to user as regular files. 6) The quota-tools will need to be modified to support hidden quota files on ext4. E2fsprogs will also include support for creating and fixing quota files. 7) Support is only for the new V2 quota file format. Tested-by: Jan Kara <jack@suse.cz> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Johann Lombardi <johann@whamcloud.com> Signed-off-by: Aditya Kali <adityakali@google.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-07-23 00:21:31 +00:00
if (IS_ERR(qf_inode)) {
ext4_error(sb, "Bad quota inode: %lu, type: %d",
qf_inums[type], type);
ext4: make quota as first class supported feature This patch adds support for quotas as a first class feature in ext4; which is to say, the quota files are stored in hidden inodes as file system metadata, instead of as separate files visible in the file system directory hierarchy. It is based on the proposal at: https://ext4.wiki.kernel.org/index.php/Design_For_1st_Class_Quota_in_Ext4 This patch introduces a new feature - EXT4_FEATURE_RO_COMPAT_QUOTA which, when turned on, enables quota accounting at mount time iteself. Also, the quota inodes are stored in two additional superblock fields. Some changes introduced by this patch that should be pointed out are: 1) Two new ext4-superblock fields - s_usr_quota_inum and s_grp_quota_inum for storing the quota inodes in use. 2) Default quota inodes are: inode#3 for tracking userquota and inode#4 for tracking group quota. The superblock fields can be set to use other inodes as well. 3) If the QUOTA feature and corresponding quota inodes are set in superblock, the quota usage tracking is turned on at mount time. On 'quotaon' ioctl, the quota limits enforcement is turned on. 'quotaoff' ioctl turns off only the limits enforcement in this case. 4) When QUOTA feature is in use, the quota mount options 'quota', 'usrquota', 'grpquota' are ignored by the kernel. 5) mke2fs or tune2fs can be used to set the QUOTA feature and initialize quota inodes. The default reserved inodes will not be visible to user as regular files. 6) The quota-tools will need to be modified to support hidden quota files on ext4. E2fsprogs will also include support for creating and fixing quota files. 7) Support is only for the new V2 quota file format. Tested-by: Jan Kara <jack@suse.cz> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Johann Lombardi <johann@whamcloud.com> Signed-off-by: Aditya Kali <adityakali@google.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-07-23 00:21:31 +00:00
return PTR_ERR(qf_inode);
}
/* Don't account quota for quota files to avoid recursion */
qf_inode->i_flags |= S_NOQUOTA;
lockdep_set_quota_inode(qf_inode, I_DATA_SEM_QUOTA);
err = dquot_load_quota_inode(qf_inode, type, format_id, flags);
if (err)
lockdep_set_quota_inode(qf_inode, I_DATA_SEM_NORMAL);
iput(qf_inode);
ext4: make quota as first class supported feature This patch adds support for quotas as a first class feature in ext4; which is to say, the quota files are stored in hidden inodes as file system metadata, instead of as separate files visible in the file system directory hierarchy. It is based on the proposal at: https://ext4.wiki.kernel.org/index.php/Design_For_1st_Class_Quota_in_Ext4 This patch introduces a new feature - EXT4_FEATURE_RO_COMPAT_QUOTA which, when turned on, enables quota accounting at mount time iteself. Also, the quota inodes are stored in two additional superblock fields. Some changes introduced by this patch that should be pointed out are: 1) Two new ext4-superblock fields - s_usr_quota_inum and s_grp_quota_inum for storing the quota inodes in use. 2) Default quota inodes are: inode#3 for tracking userquota and inode#4 for tracking group quota. The superblock fields can be set to use other inodes as well. 3) If the QUOTA feature and corresponding quota inodes are set in superblock, the quota usage tracking is turned on at mount time. On 'quotaon' ioctl, the quota limits enforcement is turned on. 'quotaoff' ioctl turns off only the limits enforcement in this case. 4) When QUOTA feature is in use, the quota mount options 'quota', 'usrquota', 'grpquota' are ignored by the kernel. 5) mke2fs or tune2fs can be used to set the QUOTA feature and initialize quota inodes. The default reserved inodes will not be visible to user as regular files. 6) The quota-tools will need to be modified to support hidden quota files on ext4. E2fsprogs will also include support for creating and fixing quota files. 7) Support is only for the new V2 quota file format. Tested-by: Jan Kara <jack@suse.cz> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Johann Lombardi <johann@whamcloud.com> Signed-off-by: Aditya Kali <adityakali@google.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-07-23 00:21:31 +00:00
return err;
}
/* Enable usage tracking for all quota types. */
int ext4_enable_quotas(struct super_block *sb)
ext4: make quota as first class supported feature This patch adds support for quotas as a first class feature in ext4; which is to say, the quota files are stored in hidden inodes as file system metadata, instead of as separate files visible in the file system directory hierarchy. It is based on the proposal at: https://ext4.wiki.kernel.org/index.php/Design_For_1st_Class_Quota_in_Ext4 This patch introduces a new feature - EXT4_FEATURE_RO_COMPAT_QUOTA which, when turned on, enables quota accounting at mount time iteself. Also, the quota inodes are stored in two additional superblock fields. Some changes introduced by this patch that should be pointed out are: 1) Two new ext4-superblock fields - s_usr_quota_inum and s_grp_quota_inum for storing the quota inodes in use. 2) Default quota inodes are: inode#3 for tracking userquota and inode#4 for tracking group quota. The superblock fields can be set to use other inodes as well. 3) If the QUOTA feature and corresponding quota inodes are set in superblock, the quota usage tracking is turned on at mount time. On 'quotaon' ioctl, the quota limits enforcement is turned on. 'quotaoff' ioctl turns off only the limits enforcement in this case. 4) When QUOTA feature is in use, the quota mount options 'quota', 'usrquota', 'grpquota' are ignored by the kernel. 5) mke2fs or tune2fs can be used to set the QUOTA feature and initialize quota inodes. The default reserved inodes will not be visible to user as regular files. 6) The quota-tools will need to be modified to support hidden quota files on ext4. E2fsprogs will also include support for creating and fixing quota files. 7) Support is only for the new V2 quota file format. Tested-by: Jan Kara <jack@suse.cz> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Johann Lombardi <johann@whamcloud.com> Signed-off-by: Aditya Kali <adityakali@google.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-07-23 00:21:31 +00:00
{
int type, err = 0;
unsigned long qf_inums[EXT4_MAXQUOTAS] = {
ext4: make quota as first class supported feature This patch adds support for quotas as a first class feature in ext4; which is to say, the quota files are stored in hidden inodes as file system metadata, instead of as separate files visible in the file system directory hierarchy. It is based on the proposal at: https://ext4.wiki.kernel.org/index.php/Design_For_1st_Class_Quota_in_Ext4 This patch introduces a new feature - EXT4_FEATURE_RO_COMPAT_QUOTA which, when turned on, enables quota accounting at mount time iteself. Also, the quota inodes are stored in two additional superblock fields. Some changes introduced by this patch that should be pointed out are: 1) Two new ext4-superblock fields - s_usr_quota_inum and s_grp_quota_inum for storing the quota inodes in use. 2) Default quota inodes are: inode#3 for tracking userquota and inode#4 for tracking group quota. The superblock fields can be set to use other inodes as well. 3) If the QUOTA feature and corresponding quota inodes are set in superblock, the quota usage tracking is turned on at mount time. On 'quotaon' ioctl, the quota limits enforcement is turned on. 'quotaoff' ioctl turns off only the limits enforcement in this case. 4) When QUOTA feature is in use, the quota mount options 'quota', 'usrquota', 'grpquota' are ignored by the kernel. 5) mke2fs or tune2fs can be used to set the QUOTA feature and initialize quota inodes. The default reserved inodes will not be visible to user as regular files. 6) The quota-tools will need to be modified to support hidden quota files on ext4. E2fsprogs will also include support for creating and fixing quota files. 7) Support is only for the new V2 quota file format. Tested-by: Jan Kara <jack@suse.cz> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Johann Lombardi <johann@whamcloud.com> Signed-off-by: Aditya Kali <adityakali@google.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-07-23 00:21:31 +00:00
le32_to_cpu(EXT4_SB(sb)->s_es->s_usr_quota_inum),
le32_to_cpu(EXT4_SB(sb)->s_es->s_grp_quota_inum),
le32_to_cpu(EXT4_SB(sb)->s_es->s_prj_quota_inum)
ext4: make quota as first class supported feature This patch adds support for quotas as a first class feature in ext4; which is to say, the quota files are stored in hidden inodes as file system metadata, instead of as separate files visible in the file system directory hierarchy. It is based on the proposal at: https://ext4.wiki.kernel.org/index.php/Design_For_1st_Class_Quota_in_Ext4 This patch introduces a new feature - EXT4_FEATURE_RO_COMPAT_QUOTA which, when turned on, enables quota accounting at mount time iteself. Also, the quota inodes are stored in two additional superblock fields. Some changes introduced by this patch that should be pointed out are: 1) Two new ext4-superblock fields - s_usr_quota_inum and s_grp_quota_inum for storing the quota inodes in use. 2) Default quota inodes are: inode#3 for tracking userquota and inode#4 for tracking group quota. The superblock fields can be set to use other inodes as well. 3) If the QUOTA feature and corresponding quota inodes are set in superblock, the quota usage tracking is turned on at mount time. On 'quotaon' ioctl, the quota limits enforcement is turned on. 'quotaoff' ioctl turns off only the limits enforcement in this case. 4) When QUOTA feature is in use, the quota mount options 'quota', 'usrquota', 'grpquota' are ignored by the kernel. 5) mke2fs or tune2fs can be used to set the QUOTA feature and initialize quota inodes. The default reserved inodes will not be visible to user as regular files. 6) The quota-tools will need to be modified to support hidden quota files on ext4. E2fsprogs will also include support for creating and fixing quota files. 7) Support is only for the new V2 quota file format. Tested-by: Jan Kara <jack@suse.cz> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Johann Lombardi <johann@whamcloud.com> Signed-off-by: Aditya Kali <adityakali@google.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-07-23 00:21:31 +00:00
};
bool quota_mopt[EXT4_MAXQUOTAS] = {
test_opt(sb, USRQUOTA),
test_opt(sb, GRPQUOTA),
test_opt(sb, PRJQUOTA),
};
ext4: make quota as first class supported feature This patch adds support for quotas as a first class feature in ext4; which is to say, the quota files are stored in hidden inodes as file system metadata, instead of as separate files visible in the file system directory hierarchy. It is based on the proposal at: https://ext4.wiki.kernel.org/index.php/Design_For_1st_Class_Quota_in_Ext4 This patch introduces a new feature - EXT4_FEATURE_RO_COMPAT_QUOTA which, when turned on, enables quota accounting at mount time iteself. Also, the quota inodes are stored in two additional superblock fields. Some changes introduced by this patch that should be pointed out are: 1) Two new ext4-superblock fields - s_usr_quota_inum and s_grp_quota_inum for storing the quota inodes in use. 2) Default quota inodes are: inode#3 for tracking userquota and inode#4 for tracking group quota. The superblock fields can be set to use other inodes as well. 3) If the QUOTA feature and corresponding quota inodes are set in superblock, the quota usage tracking is turned on at mount time. On 'quotaon' ioctl, the quota limits enforcement is turned on. 'quotaoff' ioctl turns off only the limits enforcement in this case. 4) When QUOTA feature is in use, the quota mount options 'quota', 'usrquota', 'grpquota' are ignored by the kernel. 5) mke2fs or tune2fs can be used to set the QUOTA feature and initialize quota inodes. The default reserved inodes will not be visible to user as regular files. 6) The quota-tools will need to be modified to support hidden quota files on ext4. E2fsprogs will also include support for creating and fixing quota files. 7) Support is only for the new V2 quota file format. Tested-by: Jan Kara <jack@suse.cz> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Johann Lombardi <johann@whamcloud.com> Signed-off-by: Aditya Kali <adityakali@google.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-07-23 00:21:31 +00:00
sb_dqopt(sb)->flags |= DQUOT_QUOTA_SYS_FILE | DQUOT_NOLIST_DIRTY;
for (type = 0; type < EXT4_MAXQUOTAS; type++) {
ext4: make quota as first class supported feature This patch adds support for quotas as a first class feature in ext4; which is to say, the quota files are stored in hidden inodes as file system metadata, instead of as separate files visible in the file system directory hierarchy. It is based on the proposal at: https://ext4.wiki.kernel.org/index.php/Design_For_1st_Class_Quota_in_Ext4 This patch introduces a new feature - EXT4_FEATURE_RO_COMPAT_QUOTA which, when turned on, enables quota accounting at mount time iteself. Also, the quota inodes are stored in two additional superblock fields. Some changes introduced by this patch that should be pointed out are: 1) Two new ext4-superblock fields - s_usr_quota_inum and s_grp_quota_inum for storing the quota inodes in use. 2) Default quota inodes are: inode#3 for tracking userquota and inode#4 for tracking group quota. The superblock fields can be set to use other inodes as well. 3) If the QUOTA feature and corresponding quota inodes are set in superblock, the quota usage tracking is turned on at mount time. On 'quotaon' ioctl, the quota limits enforcement is turned on. 'quotaoff' ioctl turns off only the limits enforcement in this case. 4) When QUOTA feature is in use, the quota mount options 'quota', 'usrquota', 'grpquota' are ignored by the kernel. 5) mke2fs or tune2fs can be used to set the QUOTA feature and initialize quota inodes. The default reserved inodes will not be visible to user as regular files. 6) The quota-tools will need to be modified to support hidden quota files on ext4. E2fsprogs will also include support for creating and fixing quota files. 7) Support is only for the new V2 quota file format. Tested-by: Jan Kara <jack@suse.cz> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Johann Lombardi <johann@whamcloud.com> Signed-off-by: Aditya Kali <adityakali@google.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-07-23 00:21:31 +00:00
if (qf_inums[type]) {
err = ext4_quota_enable(sb, type, QFMT_VFS_V1,
DQUOT_USAGE_ENABLED |
(quota_mopt[type] ? DQUOT_LIMITS_ENABLED : 0));
ext4: make quota as first class supported feature This patch adds support for quotas as a first class feature in ext4; which is to say, the quota files are stored in hidden inodes as file system metadata, instead of as separate files visible in the file system directory hierarchy. It is based on the proposal at: https://ext4.wiki.kernel.org/index.php/Design_For_1st_Class_Quota_in_Ext4 This patch introduces a new feature - EXT4_FEATURE_RO_COMPAT_QUOTA which, when turned on, enables quota accounting at mount time iteself. Also, the quota inodes are stored in two additional superblock fields. Some changes introduced by this patch that should be pointed out are: 1) Two new ext4-superblock fields - s_usr_quota_inum and s_grp_quota_inum for storing the quota inodes in use. 2) Default quota inodes are: inode#3 for tracking userquota and inode#4 for tracking group quota. The superblock fields can be set to use other inodes as well. 3) If the QUOTA feature and corresponding quota inodes are set in superblock, the quota usage tracking is turned on at mount time. On 'quotaon' ioctl, the quota limits enforcement is turned on. 'quotaoff' ioctl turns off only the limits enforcement in this case. 4) When QUOTA feature is in use, the quota mount options 'quota', 'usrquota', 'grpquota' are ignored by the kernel. 5) mke2fs or tune2fs can be used to set the QUOTA feature and initialize quota inodes. The default reserved inodes will not be visible to user as regular files. 6) The quota-tools will need to be modified to support hidden quota files on ext4. E2fsprogs will also include support for creating and fixing quota files. 7) Support is only for the new V2 quota file format. Tested-by: Jan Kara <jack@suse.cz> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Johann Lombardi <johann@whamcloud.com> Signed-off-by: Aditya Kali <adityakali@google.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-07-23 00:21:31 +00:00
if (err) {
ext4_warning(sb,
"Failed to enable quota tracking "
"(type=%d, err=%d, ino=%lu). "
"Please run e2fsck to fix.", type,
err, qf_inums[type]);
ext4_quotas_off(sb, type);
ext4: make quota as first class supported feature This patch adds support for quotas as a first class feature in ext4; which is to say, the quota files are stored in hidden inodes as file system metadata, instead of as separate files visible in the file system directory hierarchy. It is based on the proposal at: https://ext4.wiki.kernel.org/index.php/Design_For_1st_Class_Quota_in_Ext4 This patch introduces a new feature - EXT4_FEATURE_RO_COMPAT_QUOTA which, when turned on, enables quota accounting at mount time iteself. Also, the quota inodes are stored in two additional superblock fields. Some changes introduced by this patch that should be pointed out are: 1) Two new ext4-superblock fields - s_usr_quota_inum and s_grp_quota_inum for storing the quota inodes in use. 2) Default quota inodes are: inode#3 for tracking userquota and inode#4 for tracking group quota. The superblock fields can be set to use other inodes as well. 3) If the QUOTA feature and corresponding quota inodes are set in superblock, the quota usage tracking is turned on at mount time. On 'quotaon' ioctl, the quota limits enforcement is turned on. 'quotaoff' ioctl turns off only the limits enforcement in this case. 4) When QUOTA feature is in use, the quota mount options 'quota', 'usrquota', 'grpquota' are ignored by the kernel. 5) mke2fs or tune2fs can be used to set the QUOTA feature and initialize quota inodes. The default reserved inodes will not be visible to user as regular files. 6) The quota-tools will need to be modified to support hidden quota files on ext4. E2fsprogs will also include support for creating and fixing quota files. 7) Support is only for the new V2 quota file format. Tested-by: Jan Kara <jack@suse.cz> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Johann Lombardi <johann@whamcloud.com> Signed-off-by: Aditya Kali <adityakali@google.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-07-23 00:21:31 +00:00
return err;
}
}
}
return 0;
}
static int ext4_quota_off(struct super_block *sb, int type)
{
struct inode *inode = sb_dqopt(sb)->files[type];
handle_t *handle;
int err;
/* Force all delayed allocation blocks to be allocated.
* Caller already holds s_umount sem */
if (test_opt(sb, DELALLOC))
sync_filesystem(sb);
if (!inode || !igrab(inode))
goto out;
err = dquot_quota_off(sb, type);
if (err || ext4_has_feature_quota(sb))
goto out_put;
/*
* When the filesystem was remounted read-only first, we cannot cleanup
* inode flags here. Bad luck but people should be using QUOTA feature
* these days anyway.
*/
if (sb_rdonly(sb))
goto out_put;
inode_lock(inode);
/*
* Update modification times of quota files when userspace can
* start looking at them. If we fail, we return success anyway since
* this is not a hard failure and quotas are already disabled.
*/
handle = ext4_journal_start(inode, EXT4_HT_QUOTA, 1);
if (IS_ERR(handle)) {
err = PTR_ERR(handle);
goto out_unlock;
}
EXT4_I(inode)->i_flags &= ~(EXT4_NOATIME_FL | EXT4_IMMUTABLE_FL);
inode_set_flags(inode, 0, S_NOATIME | S_IMMUTABLE);
inode_set_mtime_to_ts(inode, inode_set_ctime_current(inode));
err = ext4_mark_inode_dirty(handle, inode);
ext4_journal_stop(handle);
out_unlock:
inode_unlock(inode);
out_put:
lockdep_set_quota_inode(inode, I_DATA_SEM_NORMAL);
iput(inode);
return err;
out:
return dquot_quota_off(sb, type);
}
/* Read data from quotafile - avoid pagecache and such because we cannot afford
* acquiring the locks... As quota files are never truncated and quota code
* itself serializes the operations (and no one else should touch the files)
* we don't have to be afraid of races */
static ssize_t ext4_quota_read(struct super_block *sb, int type, char *data,
size_t len, loff_t off)
{
struct inode *inode = sb_dqopt(sb)->files[type];
ext4_lblk_t blk = off >> EXT4_BLOCK_SIZE_BITS(sb);
int offset = off & (sb->s_blocksize - 1);
int tocopy;
size_t toread;
struct buffer_head *bh;
loff_t i_size = i_size_read(inode);
if (off > i_size)
return 0;
if (off+len > i_size)
len = i_size-off;
toread = len;
while (toread > 0) {
tocopy = min_t(unsigned long, sb->s_blocksize - offset, toread);
bh = ext4_bread(NULL, inode, blk, 0);
if (IS_ERR(bh))
return PTR_ERR(bh);
if (!bh) /* A hole? */
memset(data, 0, tocopy);
else
memcpy(data, bh->b_data+offset, tocopy);
brelse(bh);
offset = 0;
toread -= tocopy;
data += tocopy;
blk++;
}
return len;
}
/* Write to quotafile (we know the transaction is already started and has
* enough credits) */
static ssize_t ext4_quota_write(struct super_block *sb, int type,
const char *data, size_t len, loff_t off)
{
struct inode *inode = sb_dqopt(sb)->files[type];
ext4_lblk_t blk = off >> EXT4_BLOCK_SIZE_BITS(sb);
int err = 0, err2 = 0, offset = off & (sb->s_blocksize - 1);
int retries = 0;
struct buffer_head *bh;
handle_t *handle = journal_current_handle();
ext4: Fix BUG_ON in ext4_bread when write quota data We got issue as follows when run syzkaller: [ 167.936972] EXT4-fs error (device loop0): __ext4_remount:6314: comm rep: Abort forced by user [ 167.938306] EXT4-fs (loop0): Remounting filesystem read-only [ 167.981637] Assertion failure in ext4_getblk() at fs/ext4/inode.c:847: '(EXT4_SB(inode->i_sb)->s_mount_state & EXT4_FC_REPLAY) || handle != NULL || create == 0' [ 167.983601] ------------[ cut here ]------------ [ 167.984245] kernel BUG at fs/ext4/inode.c:847! [ 167.984882] invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI [ 167.985624] CPU: 7 PID: 2290 Comm: rep Tainted: G B 5.16.0-rc5-next-20211217+ #123 [ 167.986823] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_073836-buildvm-ppc64le-16.ppc.fedoraproject.org-3.fc31 04/01/2014 [ 167.988590] RIP: 0010:ext4_getblk+0x17e/0x504 [ 167.989189] Code: c6 01 74 28 49 c7 c0 a0 a3 5c 9b b9 4f 03 00 00 48 c7 c2 80 9c 5c 9b 48 c7 c6 40 b6 5c 9b 48 c7 c7 20 a4 5c 9b e8 77 e3 fd ff <0f> 0b 8b 04 244 [ 167.991679] RSP: 0018:ffff8881736f7398 EFLAGS: 00010282 [ 167.992385] RAX: 0000000000000094 RBX: 1ffff1102e6dee75 RCX: 0000000000000000 [ 167.993337] RDX: 0000000000000001 RSI: ffffffff9b6e29e0 RDI: ffffed102e6dee66 [ 167.994292] RBP: ffff88816a076210 R08: 0000000000000094 R09: ffffed107363fa09 [ 167.995252] R10: ffff88839b1fd047 R11: ffffed107363fa08 R12: ffff88816a0761e8 [ 167.996205] R13: 0000000000000000 R14: 0000000000000021 R15: 0000000000000001 [ 167.997158] FS: 00007f6a1428c740(0000) GS:ffff88839b000000(0000) knlGS:0000000000000000 [ 167.998238] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 167.999025] CR2: 00007f6a140716c8 CR3: 0000000133216000 CR4: 00000000000006e0 [ 167.999987] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 168.000944] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 168.001899] Call Trace: [ 168.002235] <TASK> [ 168.007167] ext4_bread+0xd/0x53 [ 168.007612] ext4_quota_write+0x20c/0x5c0 [ 168.010457] write_blk+0x100/0x220 [ 168.010944] remove_free_dqentry+0x1c6/0x440 [ 168.011525] free_dqentry.isra.0+0x565/0x830 [ 168.012133] remove_tree+0x318/0x6d0 [ 168.014744] remove_tree+0x1eb/0x6d0 [ 168.017346] remove_tree+0x1eb/0x6d0 [ 168.019969] remove_tree+0x1eb/0x6d0 [ 168.022128] qtree_release_dquot+0x291/0x340 [ 168.023297] v2_release_dquot+0xce/0x120 [ 168.023847] dquot_release+0x197/0x3e0 [ 168.024358] ext4_release_dquot+0x22a/0x2d0 [ 168.024932] dqput.part.0+0x1c9/0x900 [ 168.025430] __dquot_drop+0x120/0x190 [ 168.025942] ext4_clear_inode+0x86/0x220 [ 168.026472] ext4_evict_inode+0x9e8/0xa22 [ 168.028200] evict+0x29e/0x4f0 [ 168.028625] dispose_list+0x102/0x1f0 [ 168.029148] evict_inodes+0x2c1/0x3e0 [ 168.030188] generic_shutdown_super+0xa4/0x3b0 [ 168.030817] kill_block_super+0x95/0xd0 [ 168.031360] deactivate_locked_super+0x85/0xd0 [ 168.031977] cleanup_mnt+0x2bc/0x480 [ 168.033062] task_work_run+0xd1/0x170 [ 168.033565] do_exit+0xa4f/0x2b50 [ 168.037155] do_group_exit+0xef/0x2d0 [ 168.037666] __x64_sys_exit_group+0x3a/0x50 [ 168.038237] do_syscall_64+0x3b/0x90 [ 168.038751] entry_SYSCALL_64_after_hwframe+0x44/0xae In order to reproduce this problem, the following conditions need to be met: 1. Ext4 filesystem with no journal; 2. Filesystem image with incorrect quota data; 3. Abort filesystem forced by user; 4. umount filesystem; As in ext4_quota_write: ... if (EXT4_SB(sb)->s_journal && !handle) { ext4_msg(sb, KERN_WARNING, "Quota write (off=%llu, len=%llu)" " cancelled because transaction is not started", (unsigned long long)off, (unsigned long long)len); return -EIO; } ... We only check handle if NULL when filesystem has journal. There is need check handle if NULL even when filesystem has no journal. Signed-off-by: Ye Bin <yebin10@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20211223015506.297766-1-yebin10@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org
2021-12-23 01:55:06 +00:00
if (!handle) {
ext4_msg(sb, KERN_WARNING, "Quota write (off=%llu, len=%llu)"
" cancelled because transaction is not started",
(unsigned long long)off, (unsigned long long)len);
return -EIO;
}
/*
* Since we account only one data block in transaction credits,
* then it is impossible to cross a block boundary.
*/
if (sb->s_blocksize - offset < len) {
ext4_msg(sb, KERN_WARNING, "Quota write (off=%llu, len=%llu)"
" cancelled because not block aligned",
(unsigned long long)off, (unsigned long long)len);
return -EIO;
}
do {
bh = ext4_bread(handle, inode, blk,
EXT4_GET_BLOCKS_CREATE |
EXT4_GET_BLOCKS_METADATA_NOFAIL);
} while (PTR_ERR(bh) == -ENOSPC &&
ext4_should_retry_alloc(inode->i_sb, &retries));
if (IS_ERR(bh))
return PTR_ERR(bh);
if (!bh)
goto out;
BUFFER_TRACE(bh, "get write access");
err = ext4_journal_get_write_access(handle, sb, bh, EXT4_JTR_NONE);
if (err) {
brelse(bh);
return err;
}
lock_buffer(bh);
memcpy(bh->b_data+offset, data, len);
flush_dcache_page(bh->b_page);
unlock_buffer(bh);
err = ext4_handle_dirty_metadata(handle, NULL, bh);
brelse(bh);
out:
if (inode->i_size < off + len) {
i_size_write(inode, off + len);
EXT4_I(inode)->i_disksize = inode->i_size;
err2 = ext4_mark_inode_dirty(handle, inode);
if (unlikely(err2 && !err))
err = err2;
}
return err ? err : len;
}
#endif
#if !defined(CONFIG_EXT2_FS) && !defined(CONFIG_EXT2_FS_MODULE) && defined(CONFIG_EXT4_USE_FOR_EXT2)
static inline void register_as_ext2(void)
{
int err = register_filesystem(&ext2_fs_type);
if (err)
printk(KERN_WARNING
"EXT4-fs: Unable to register as ext2 (%d)\n", err);
}
static inline void unregister_as_ext2(void)
{
unregister_filesystem(&ext2_fs_type);
}
static inline int ext2_feature_set_ok(struct super_block *sb)
{
if (ext4_has_unknown_ext2_incompat_features(sb))
return 0;
if (sb_rdonly(sb))
return 1;
if (ext4_has_unknown_ext2_ro_compat_features(sb))
return 0;
return 1;
}
#else
static inline void register_as_ext2(void) { }
static inline void unregister_as_ext2(void) { }
static inline int ext2_feature_set_ok(struct super_block *sb) { return 0; }
#endif
static inline void register_as_ext3(void)
{
int err = register_filesystem(&ext3_fs_type);
if (err)
printk(KERN_WARNING
"EXT4-fs: Unable to register as ext3 (%d)\n", err);
}
static inline void unregister_as_ext3(void)
{
unregister_filesystem(&ext3_fs_type);
}
static inline int ext3_feature_set_ok(struct super_block *sb)
{
if (ext4_has_unknown_ext3_incompat_features(sb))
return 0;
if (!ext4_has_feature_journal(sb))
return 0;
if (sb_rdonly(sb))
return 1;
if (ext4_has_unknown_ext3_ro_compat_features(sb))
return 0;
return 1;
}
static void ext4_kill_sb(struct super_block *sb)
{
struct ext4_sb_info *sbi = EXT4_SB(sb);
struct file *bdev_file = sbi ? sbi->s_journal_bdev_file : NULL;
kill_block_super(sb);
if (bdev_file)
bdev_fput(bdev_file);
}
static struct file_system_type ext4_fs_type = {
.owner = THIS_MODULE,
.name = "ext4",
.init_fs_context = ext4_init_fs_context,
.parameters = ext4_param_specs,
.kill_sb = ext4_kill_sb,
.fs_flags = FS_REQUIRES_DEV | FS_ALLOW_IDMAP,
};
fs: Limit sys_mount to only request filesystem modules. Modify the request_module to prefix the file system type with "fs-" and add aliases to all of the filesystems that can be built as modules to match. A common practice is to build all of the kernel code and leave code that is not commonly needed as modules, with the result that many users are exposed to any bug anywhere in the kernel. Looking for filesystems with a fs- prefix limits the pool of possible modules that can be loaded by mount to just filesystems trivially making things safer with no real cost. Using aliases means user space can control the policy of which filesystem modules are auto-loaded by editing /etc/modprobe.d/*.conf with blacklist and alias directives. Allowing simple, safe, well understood work-arounds to known problematic software. This also addresses a rare but unfortunate problem where the filesystem name is not the same as it's module name and module auto-loading would not work. While writing this patch I saw a handful of such cases. The most significant being autofs that lives in the module autofs4. This is relevant to user namespaces because we can reach the request module in get_fs_type() without having any special permissions, and people get uncomfortable when a user specified string (in this case the filesystem type) goes all of the way to request_module. After having looked at this issue I don't think there is any particular reason to perform any filtering or permission checks beyond making it clear in the module request that we want a filesystem module. The common pattern in the kernel is to call request_module() without regards to the users permissions. In general all a filesystem module does once loaded is call register_filesystem() and go to sleep. Which means there is not much attack surface exposed by loading a filesytem module unless the filesystem is mounted. In a user namespace filesystems are not mounted unless .fs_flags = FS_USERNS_MOUNT, which most filesystems do not set today. Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Acked-by: Kees Cook <keescook@chromium.org> Reported-by: Kees Cook <keescook@google.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2013-03-03 03:39:14 +00:00
MODULE_ALIAS_FS("ext4");
ext4: serialize unaligned asynchronous DIO ext4 has a data corruption case when doing non-block-aligned asynchronous direct IO into a sparse file, as demonstrated by xfstest 240. The root cause is that while ext4 preallocates space in the hole, mappings of that space still look "new" and dio_zero_block() will zero out the unwritten portions. When more than one AIO thread is going, they both find this "new" block and race to zero out their portion; this is uncoordinated and causes data corruption. Dave Chinner fixed this for xfs by simply serializing all unaligned asynchronous direct IO. I've done the same here. The difference is that we only wait on conversions, not all IO. This is a very big hammer, and I'm not very pleased with stuffing this into ext4_file_write(). But since ext4 is DIO_LOCKING, we need to serialize it at this high level. I tried to move this into ext4_ext_direct_IO, but by then we have the i_mutex already, and we will wait on the work queue to do conversions - which must also take the i_mutex. So that won't work. This was originally exposed by qemu-kvm installing to a raw disk image with a normal sector-63 alignment. I've tested a backport of this patch with qemu, and it does avoid the corruption. It is also quite a lot slower (14 min for package installs, vs. 8 min for well-aligned) but I'll take slow correctness over fast corruption any day. Mingming suggested that we can track outstanding conversions, and wait on those so that non-sparse files won't be affected, and I've implemented that here; unaligned AIO to nonsparse files won't take a perf hit. [tytso@mit.edu: Keep the mutex as a hashed array instead of bloating the ext4 inode] [tytso@mit.edu: Fix up namespace issues so that global variables are protected with an "ext4_" prefix.] Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-02-12 13:17:34 +00:00
/* Shared across all ext4 file systems */
wait_queue_head_t ext4__ioend_wq[EXT4_WQ_HASH_SZ];
static int __init ext4_init_fs(void)
{
ext4: serialize unaligned asynchronous DIO ext4 has a data corruption case when doing non-block-aligned asynchronous direct IO into a sparse file, as demonstrated by xfstest 240. The root cause is that while ext4 preallocates space in the hole, mappings of that space still look "new" and dio_zero_block() will zero out the unwritten portions. When more than one AIO thread is going, they both find this "new" block and race to zero out their portion; this is uncoordinated and causes data corruption. Dave Chinner fixed this for xfs by simply serializing all unaligned asynchronous direct IO. I've done the same here. The difference is that we only wait on conversions, not all IO. This is a very big hammer, and I'm not very pleased with stuffing this into ext4_file_write(). But since ext4 is DIO_LOCKING, we need to serialize it at this high level. I tried to move this into ext4_ext_direct_IO, but by then we have the i_mutex already, and we will wait on the work queue to do conversions - which must also take the i_mutex. So that won't work. This was originally exposed by qemu-kvm installing to a raw disk image with a normal sector-63 alignment. I've tested a backport of this patch with qemu, and it does avoid the corruption. It is also quite a lot slower (14 min for package installs, vs. 8 min for well-aligned) but I'll take slow correctness over fast corruption any day. Mingming suggested that we can track outstanding conversions, and wait on those so that non-sparse files won't be affected, and I've implemented that here; unaligned AIO to nonsparse files won't take a perf hit. [tytso@mit.edu: Keep the mutex as a hashed array instead of bloating the ext4 inode] [tytso@mit.edu: Fix up namespace issues so that global variables are protected with an "ext4_" prefix.] Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-02-12 13:17:34 +00:00
int i, err;
ratelimit_state_init(&ext4_mount_msg_ratelimit, 30 * HZ, 64);
ext4_li_info = NULL;
/* Build-time check for flags consistency */
ext4_check_flag_values();
ext4: serialize unaligned asynchronous DIO ext4 has a data corruption case when doing non-block-aligned asynchronous direct IO into a sparse file, as demonstrated by xfstest 240. The root cause is that while ext4 preallocates space in the hole, mappings of that space still look "new" and dio_zero_block() will zero out the unwritten portions. When more than one AIO thread is going, they both find this "new" block and race to zero out their portion; this is uncoordinated and causes data corruption. Dave Chinner fixed this for xfs by simply serializing all unaligned asynchronous direct IO. I've done the same here. The difference is that we only wait on conversions, not all IO. This is a very big hammer, and I'm not very pleased with stuffing this into ext4_file_write(). But since ext4 is DIO_LOCKING, we need to serialize it at this high level. I tried to move this into ext4_ext_direct_IO, but by then we have the i_mutex already, and we will wait on the work queue to do conversions - which must also take the i_mutex. So that won't work. This was originally exposed by qemu-kvm installing to a raw disk image with a normal sector-63 alignment. I've tested a backport of this patch with qemu, and it does avoid the corruption. It is also quite a lot slower (14 min for package installs, vs. 8 min for well-aligned) but I'll take slow correctness over fast corruption any day. Mingming suggested that we can track outstanding conversions, and wait on those so that non-sparse files won't be affected, and I've implemented that here; unaligned AIO to nonsparse files won't take a perf hit. [tytso@mit.edu: Keep the mutex as a hashed array instead of bloating the ext4 inode] [tytso@mit.edu: Fix up namespace issues so that global variables are protected with an "ext4_" prefix.] Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-02-12 13:17:34 +00:00
for (i = 0; i < EXT4_WQ_HASH_SZ; i++)
ext4: serialize unaligned asynchronous DIO ext4 has a data corruption case when doing non-block-aligned asynchronous direct IO into a sparse file, as demonstrated by xfstest 240. The root cause is that while ext4 preallocates space in the hole, mappings of that space still look "new" and dio_zero_block() will zero out the unwritten portions. When more than one AIO thread is going, they both find this "new" block and race to zero out their portion; this is uncoordinated and causes data corruption. Dave Chinner fixed this for xfs by simply serializing all unaligned asynchronous direct IO. I've done the same here. The difference is that we only wait on conversions, not all IO. This is a very big hammer, and I'm not very pleased with stuffing this into ext4_file_write(). But since ext4 is DIO_LOCKING, we need to serialize it at this high level. I tried to move this into ext4_ext_direct_IO, but by then we have the i_mutex already, and we will wait on the work queue to do conversions - which must also take the i_mutex. So that won't work. This was originally exposed by qemu-kvm installing to a raw disk image with a normal sector-63 alignment. I've tested a backport of this patch with qemu, and it does avoid the corruption. It is also quite a lot slower (14 min for package installs, vs. 8 min for well-aligned) but I'll take slow correctness over fast corruption any day. Mingming suggested that we can track outstanding conversions, and wait on those so that non-sparse files won't be affected, and I've implemented that here; unaligned AIO to nonsparse files won't take a perf hit. [tytso@mit.edu: Keep the mutex as a hashed array instead of bloating the ext4 inode] [tytso@mit.edu: Fix up namespace issues so that global variables are protected with an "ext4_" prefix.] Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-02-12 13:17:34 +00:00
init_waitqueue_head(&ext4__ioend_wq[i]);
err = ext4_init_es();
if (err)
return err;
err = ext4_init_pending();
if (err)
goto out7;
err = ext4_init_post_read_processing();
if (err)
goto out6;
err = ext4_init_pageio();
if (err)
goto out5;
err = ext4_init_system_zone();
if (err)
goto out4;
err = ext4_init_sysfs();
if (err)
goto out3;
err = ext4_init_mballoc();
if (err)
goto out2;
err = init_inodecache();
if (err)
goto out1;
err = ext4_fc_init_dentry_cache();
if (err)
goto out05;
register_as_ext3();
register_as_ext2();
err = register_filesystem(&ext4_fs_type);
if (err)
goto out;
ext4: add support for lazy inode table initialization When the lazy_itable_init extended option is passed to mke2fs, it considerably speeds up filesystem creation because inode tables are not zeroed out. The fact that parts of the inode table are uninitialized is not a problem so long as the block group descriptors, which contain information regarding how much of the inode table has been initialized, has not been corrupted However, if the block group checksums are not valid, e2fsck must scan the entire inode table, and the the old, uninitialized data could potentially cause e2fsck to report false problems. Hence, it is important for the inode tables to be initialized as soon as possble. This commit adds this feature so that mke2fs can safely use the lazy inode table initialization feature to speed up formatting file systems. This is done via a new new kernel thread called ext4lazyinit, which is created on demand and destroyed, when it is no longer needed. There is only one thread for all ext4 filesystems in the system. When the first filesystem with inititable mount option is mounted, ext4lazyinit thread is created, then the filesystem can register its request in the request list. This thread then walks through the list of requests picking up scheduled requests and invoking ext4_init_inode_table(). Next schedule time for the request is computed by multiplying the time it took to zero out last inode table with wait multiplier, which can be set with the (init_itable=n) mount option (default is 10). We are doing this so we do not take the whole I/O bandwidth. When the thread is no longer necessary (request list is empty) it frees the appropriate structures and exits (and can be created later later by another filesystem). We do not disturb regular inode allocations in any way, it just do not care whether the inode table is, or is not zeroed. But when zeroing, we have to skip used inodes, obviously. Also we should prevent new inode allocations from the group, while zeroing is on the way. For that we take write alloc_sem lock in ext4_init_inode_table() and read alloc_sem in the ext4_claim_inode, so when we are unlucky and allocator hits the group which is currently being zeroed, it just has to wait. This can be suppresed using the mount option no_init_itable. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-28 01:30:05 +00:00
return 0;
out:
unregister_as_ext2();
unregister_as_ext3();
ext4_fc_destroy_dentry_cache();
out05:
destroy_inodecache();
out1:
ext4_exit_mballoc();
out2:
ext4_exit_sysfs();
out3:
ext4_exit_system_zone();
out4:
ext4_exit_pageio();
out5:
ext4_exit_post_read_processing();
out6:
ext4_exit_pending();
out7:
ext4_exit_es();
return err;
}
static void __exit ext4_exit_fs(void)
{
ext4: add support for lazy inode table initialization When the lazy_itable_init extended option is passed to mke2fs, it considerably speeds up filesystem creation because inode tables are not zeroed out. The fact that parts of the inode table are uninitialized is not a problem so long as the block group descriptors, which contain information regarding how much of the inode table has been initialized, has not been corrupted However, if the block group checksums are not valid, e2fsck must scan the entire inode table, and the the old, uninitialized data could potentially cause e2fsck to report false problems. Hence, it is important for the inode tables to be initialized as soon as possble. This commit adds this feature so that mke2fs can safely use the lazy inode table initialization feature to speed up formatting file systems. This is done via a new new kernel thread called ext4lazyinit, which is created on demand and destroyed, when it is no longer needed. There is only one thread for all ext4 filesystems in the system. When the first filesystem with inititable mount option is mounted, ext4lazyinit thread is created, then the filesystem can register its request in the request list. This thread then walks through the list of requests picking up scheduled requests and invoking ext4_init_inode_table(). Next schedule time for the request is computed by multiplying the time it took to zero out last inode table with wait multiplier, which can be set with the (init_itable=n) mount option (default is 10). We are doing this so we do not take the whole I/O bandwidth. When the thread is no longer necessary (request list is empty) it frees the appropriate structures and exits (and can be created later later by another filesystem). We do not disturb regular inode allocations in any way, it just do not care whether the inode table is, or is not zeroed. But when zeroing, we have to skip used inodes, obviously. Also we should prevent new inode allocations from the group, while zeroing is on the way. For that we take write alloc_sem lock in ext4_init_inode_table() and read alloc_sem in the ext4_claim_inode, so when we are unlucky and allocator hits the group which is currently being zeroed, it just has to wait. This can be suppresed using the mount option no_init_itable. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-28 01:30:05 +00:00
ext4_destroy_lazyinit_thread();
unregister_as_ext2();
unregister_as_ext3();
unregister_filesystem(&ext4_fs_type);
ext4_fc_destroy_dentry_cache();
destroy_inodecache();
ext4_exit_mballoc();
ext4_exit_sysfs();
ext4_exit_system_zone();
ext4_exit_pageio();
ext4_exit_post_read_processing();
ext4_exit_es();
ext4_exit_pending();
}
MODULE_AUTHOR("Remy Card, Stephen Tweedie, Andrew Morton, Andreas Dilger, Theodore Ts'o and others");
MODULE_DESCRIPTION("Fourth Extended Filesystem");
MODULE_LICENSE("GPL");
MODULE_SOFTDEP("pre: crc32c");
module_init(ext4_init_fs)
module_exit(ext4_exit_fs)