linux/sound/core/jack.c

674 lines
17 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Jack abstraction layer
*
* Copyright 2008 Wolfson Microelectronics
*/
#include <linux/input.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 08:04:11 +00:00
#include <linux/slab.h>
#include <linux/module.h>
ALSA: jack: implement software jack injection via debugfs This change adds audio jack injection feature through debugfs, with this feature, we could validate alsa userspace changes by injecting plugin or plugout events to the non-phantom audio jacks. With this change, the sound core will build the folders $debugfs_mount_dir/sound/cardN if SND_DEBUG and DEBUG_FS are enabled. And if users also enable the SND_JACK_INJECTION_DEBUG, the jack injection nodes will be built in the folder cardN like below: $tree $debugfs_mount_dir/sound $debugfs_mount_dir/sound ├── card0 │   ├── HDMI_DP_pcm_10_Jack │   │   ├── jackin_inject │   │   ├── kctl_id │   │   ├── mask_bits │   │   ├── status │   │   ├── sw_inject_enable │   │   └── type ... │   └── HDMI_DP_pcm_9_Jack │   ├── jackin_inject │   ├── kctl_id │   ├── mask_bits │   ├── status │   ├── sw_inject_enable │   └── type └── card1 ├── HDMI_DP_pcm_5_Jack │   ├── jackin_inject │   ├── kctl_id │   ├── mask_bits │   ├── status │   ├── sw_inject_enable │   └── type ... ├── Headphone_Jack │   ├── jackin_inject │   ├── kctl_id │   ├── mask_bits │   ├── status │   ├── sw_inject_enable │   └── type └── Headset_Mic_Jack ├── jackin_inject ├── kctl_id ├── mask_bits ├── status ├── sw_inject_enable └── type The nodes kctl_id, mask_bits, status and type are read-only, users could check jack or jack_kctl's information through them. The nodes sw_inject_enable and jackin_inject are directly used for injection. The sw_inject_enable is read-write, users could check if software injection is enabled or not on this jack, and users could echo 1 or 0 to enable or disable software injection on this jack. Once the injection is enabled, the jack will not change by hardware events anymore, once the injection is disabled, the jack will restore the last reported hardware events to the jack. The jackin_inject is write-only, if the injection is enabled, users could echo 1 or 0 to this node to inject plugin or plugout events to this jack. For the detailed usage information on these nodes, please refer to Documentation/sound/designs/jack-injection.rst. Reviewed-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Jaroslav Kysela <perex@perex.cz> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Hui Wang <hui.wang@canonical.com> Link: https://lore.kernel.org/r/20210127085639.74954-2-hui.wang@canonical.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-01-27 08:56:39 +00:00
#include <linux/ctype.h>
#include <linux/mm.h>
#include <linux/debugfs.h>
#include <sound/jack.h>
#include <sound/core.h>
#include <sound/control.h>
struct snd_jack_kctl {
struct snd_kcontrol *kctl;
struct list_head list; /* list of controls belong to the same jack */
unsigned int mask_bits; /* only masked status bits are reported via kctl */
ALSA: jack: implement software jack injection via debugfs This change adds audio jack injection feature through debugfs, with this feature, we could validate alsa userspace changes by injecting plugin or plugout events to the non-phantom audio jacks. With this change, the sound core will build the folders $debugfs_mount_dir/sound/cardN if SND_DEBUG and DEBUG_FS are enabled. And if users also enable the SND_JACK_INJECTION_DEBUG, the jack injection nodes will be built in the folder cardN like below: $tree $debugfs_mount_dir/sound $debugfs_mount_dir/sound ├── card0 │   ├── HDMI_DP_pcm_10_Jack │   │   ├── jackin_inject │   │   ├── kctl_id │   │   ├── mask_bits │   │   ├── status │   │   ├── sw_inject_enable │   │   └── type ... │   └── HDMI_DP_pcm_9_Jack │   ├── jackin_inject │   ├── kctl_id │   ├── mask_bits │   ├── status │   ├── sw_inject_enable │   └── type └── card1 ├── HDMI_DP_pcm_5_Jack │   ├── jackin_inject │   ├── kctl_id │   ├── mask_bits │   ├── status │   ├── sw_inject_enable │   └── type ... ├── Headphone_Jack │   ├── jackin_inject │   ├── kctl_id │   ├── mask_bits │   ├── status │   ├── sw_inject_enable │   └── type └── Headset_Mic_Jack ├── jackin_inject ├── kctl_id ├── mask_bits ├── status ├── sw_inject_enable └── type The nodes kctl_id, mask_bits, status and type are read-only, users could check jack or jack_kctl's information through them. The nodes sw_inject_enable and jackin_inject are directly used for injection. The sw_inject_enable is read-write, users could check if software injection is enabled or not on this jack, and users could echo 1 or 0 to enable or disable software injection on this jack. Once the injection is enabled, the jack will not change by hardware events anymore, once the injection is disabled, the jack will restore the last reported hardware events to the jack. The jackin_inject is write-only, if the injection is enabled, users could echo 1 or 0 to this node to inject plugin or plugout events to this jack. For the detailed usage information on these nodes, please refer to Documentation/sound/designs/jack-injection.rst. Reviewed-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Jaroslav Kysela <perex@perex.cz> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Hui Wang <hui.wang@canonical.com> Link: https://lore.kernel.org/r/20210127085639.74954-2-hui.wang@canonical.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-01-27 08:56:39 +00:00
struct snd_jack *jack; /* pointer to struct snd_jack */
bool sw_inject_enable; /* allow to inject plug event via debugfs */
#ifdef CONFIG_SND_JACK_INJECTION_DEBUG
struct dentry *jack_debugfs_root; /* jack_kctl debugfs root */
#endif
};
#ifdef CONFIG_SND_JACK_INPUT_DEV
static const int jack_switch_types[SND_JACK_SWITCH_TYPES] = {
SW_HEADPHONE_INSERT,
SW_MICROPHONE_INSERT,
SW_LINEOUT_INSERT,
SW_JACK_PHYSICAL_INSERT,
SW_VIDEOOUT_INSERT,
SW_LINEIN_INSERT,
};
#endif /* CONFIG_SND_JACK_INPUT_DEV */
static int snd_jack_dev_disconnect(struct snd_device *device)
{
#ifdef CONFIG_SND_JACK_INPUT_DEV
struct snd_jack *jack = device->device_data;
if (!jack->input_dev)
return 0;
/* If the input device is registered with the input subsystem
* then we need to use a different deallocator. */
if (jack->registered)
input_unregister_device(jack->input_dev);
else
input_free_device(jack->input_dev);
jack->input_dev = NULL;
#endif /* CONFIG_SND_JACK_INPUT_DEV */
return 0;
}
static int snd_jack_dev_free(struct snd_device *device)
{
struct snd_jack *jack = device->device_data;
struct snd_card *card = device->card;
struct snd_jack_kctl *jack_kctl, *tmp_jack_kctl;
list_for_each_entry_safe(jack_kctl, tmp_jack_kctl, &jack->kctl_list, list) {
list_del_init(&jack_kctl->list);
snd_ctl_remove(card, jack_kctl->kctl);
}
if (jack->private_free)
jack->private_free(jack);
snd_jack_dev_disconnect(device);
kfree(jack->id);
kfree(jack);
return 0;
}
#ifdef CONFIG_SND_JACK_INPUT_DEV
static int snd_jack_dev_register(struct snd_device *device)
{
struct snd_jack *jack = device->device_data;
struct snd_card *card = device->card;
int err, i;
snprintf(jack->name, sizeof(jack->name), "%s %s",
card->shortname, jack->id);
if (!jack->input_dev)
return 0;
jack->input_dev->name = jack->name;
/* Default to the sound card device. */
if (!jack->input_dev->dev.parent)
jack->input_dev->dev.parent = snd_card_get_device_link(card);
/* Add capabilities for any keys that are enabled */
for (i = 0; i < ARRAY_SIZE(jack->key); i++) {
int testbit = SND_JACK_BTN_0 >> i;
if (!(jack->type & testbit))
continue;
if (!jack->key[i])
jack->key[i] = BTN_0 + i;
input_set_capability(jack->input_dev, EV_KEY, jack->key[i]);
}
err = input_register_device(jack->input_dev);
if (err == 0)
jack->registered = 1;
return err;
}
#endif /* CONFIG_SND_JACK_INPUT_DEV */
ALSA: jack: implement software jack injection via debugfs This change adds audio jack injection feature through debugfs, with this feature, we could validate alsa userspace changes by injecting plugin or plugout events to the non-phantom audio jacks. With this change, the sound core will build the folders $debugfs_mount_dir/sound/cardN if SND_DEBUG and DEBUG_FS are enabled. And if users also enable the SND_JACK_INJECTION_DEBUG, the jack injection nodes will be built in the folder cardN like below: $tree $debugfs_mount_dir/sound $debugfs_mount_dir/sound ├── card0 │   ├── HDMI_DP_pcm_10_Jack │   │   ├── jackin_inject │   │   ├── kctl_id │   │   ├── mask_bits │   │   ├── status │   │   ├── sw_inject_enable │   │   └── type ... │   └── HDMI_DP_pcm_9_Jack │   ├── jackin_inject │   ├── kctl_id │   ├── mask_bits │   ├── status │   ├── sw_inject_enable │   └── type └── card1 ├── HDMI_DP_pcm_5_Jack │   ├── jackin_inject │   ├── kctl_id │   ├── mask_bits │   ├── status │   ├── sw_inject_enable │   └── type ... ├── Headphone_Jack │   ├── jackin_inject │   ├── kctl_id │   ├── mask_bits │   ├── status │   ├── sw_inject_enable │   └── type └── Headset_Mic_Jack ├── jackin_inject ├── kctl_id ├── mask_bits ├── status ├── sw_inject_enable └── type The nodes kctl_id, mask_bits, status and type are read-only, users could check jack or jack_kctl's information through them. The nodes sw_inject_enable and jackin_inject are directly used for injection. The sw_inject_enable is read-write, users could check if software injection is enabled or not on this jack, and users could echo 1 or 0 to enable or disable software injection on this jack. Once the injection is enabled, the jack will not change by hardware events anymore, once the injection is disabled, the jack will restore the last reported hardware events to the jack. The jackin_inject is write-only, if the injection is enabled, users could echo 1 or 0 to this node to inject plugin or plugout events to this jack. For the detailed usage information on these nodes, please refer to Documentation/sound/designs/jack-injection.rst. Reviewed-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Jaroslav Kysela <perex@perex.cz> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Hui Wang <hui.wang@canonical.com> Link: https://lore.kernel.org/r/20210127085639.74954-2-hui.wang@canonical.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-01-27 08:56:39 +00:00
#ifdef CONFIG_SND_JACK_INJECTION_DEBUG
static void snd_jack_inject_report(struct snd_jack_kctl *jack_kctl, int status)
{
struct snd_jack *jack;
#ifdef CONFIG_SND_JACK_INPUT_DEV
int i;
#endif
if (!jack_kctl)
return;
jack = jack_kctl->jack;
if (jack_kctl->sw_inject_enable)
snd_kctl_jack_report(jack->card, jack_kctl->kctl,
status & jack_kctl->mask_bits);
#ifdef CONFIG_SND_JACK_INPUT_DEV
if (!jack->input_dev)
return;
for (i = 0; i < ARRAY_SIZE(jack->key); i++) {
int testbit = ((SND_JACK_BTN_0 >> i) & jack_kctl->mask_bits);
if (jack->type & testbit)
input_report_key(jack->input_dev, jack->key[i],
status & testbit);
}
for (i = 0; i < ARRAY_SIZE(jack_switch_types); i++) {
int testbit = ((1 << i) & jack_kctl->mask_bits);
if (jack->type & testbit)
input_report_switch(jack->input_dev,
jack_switch_types[i],
status & testbit);
}
input_sync(jack->input_dev);
#endif /* CONFIG_SND_JACK_INPUT_DEV */
}
static ssize_t sw_inject_enable_read(struct file *file,
char __user *to, size_t count, loff_t *ppos)
{
struct snd_jack_kctl *jack_kctl = file->private_data;
int len, ret;
char buf[128];
len = scnprintf(buf, sizeof(buf), "%s: %s\t\t%s: %i\n", "Jack", jack_kctl->kctl->id.name,
"Inject Enabled", jack_kctl->sw_inject_enable);
ret = simple_read_from_buffer(to, count, ppos, buf, len);
return ret;
}
static ssize_t sw_inject_enable_write(struct file *file,
const char __user *from, size_t count, loff_t *ppos)
{
struct snd_jack_kctl *jack_kctl = file->private_data;
int ret, err;
unsigned long enable;
char buf[8] = { 0 };
ret = simple_write_to_buffer(buf, sizeof(buf) - 1, ppos, from, count);
err = kstrtoul(buf, 0, &enable);
if (err)
return err;
if (jack_kctl->sw_inject_enable == (!!enable))
return ret;
jack_kctl->sw_inject_enable = !!enable;
if (!jack_kctl->sw_inject_enable)
snd_jack_report(jack_kctl->jack, jack_kctl->jack->hw_status_cache);
return ret;
}
static ssize_t jackin_inject_write(struct file *file,
const char __user *from, size_t count, loff_t *ppos)
{
struct snd_jack_kctl *jack_kctl = file->private_data;
int ret, err;
unsigned long enable;
char buf[8] = { 0 };
if (!jack_kctl->sw_inject_enable)
return -EINVAL;
ret = simple_write_to_buffer(buf, sizeof(buf) - 1, ppos, from, count);
err = kstrtoul(buf, 0, &enable);
if (err)
return err;
snd_jack_inject_report(jack_kctl, !!enable ? jack_kctl->mask_bits : 0);
return ret;
}
static ssize_t jack_kctl_id_read(struct file *file,
char __user *to, size_t count, loff_t *ppos)
{
struct snd_jack_kctl *jack_kctl = file->private_data;
char buf[64];
int len, ret;
len = scnprintf(buf, sizeof(buf), "%s\n", jack_kctl->kctl->id.name);
ret = simple_read_from_buffer(to, count, ppos, buf, len);
return ret;
}
/* the bit definition is aligned with snd_jack_types in jack.h */
static const char * const jack_events_name[] = {
"HEADPHONE(0x0001)", "MICROPHONE(0x0002)", "LINEOUT(0x0004)",
"MECHANICAL(0x0008)", "VIDEOOUT(0x0010)", "LINEIN(0x0020)",
"", "", "", "BTN_5(0x0200)", "BTN_4(0x0400)", "BTN_3(0x0800)",
"BTN_2(0x1000)", "BTN_1(0x2000)", "BTN_0(0x4000)", "",
};
/* the recommended buffer size is 256 */
static int parse_mask_bits(unsigned int mask_bits, char *buf, size_t buf_size)
{
int i;
scnprintf(buf, buf_size, "0x%04x", mask_bits);
for (i = 0; i < ARRAY_SIZE(jack_events_name); i++)
if (mask_bits & (1 << i)) {
strlcat(buf, " ", buf_size);
strlcat(buf, jack_events_name[i], buf_size);
}
strlcat(buf, "\n", buf_size);
return strlen(buf);
}
static ssize_t jack_kctl_mask_bits_read(struct file *file,
char __user *to, size_t count, loff_t *ppos)
{
struct snd_jack_kctl *jack_kctl = file->private_data;
char buf[256];
int len, ret;
len = parse_mask_bits(jack_kctl->mask_bits, buf, sizeof(buf));
ret = simple_read_from_buffer(to, count, ppos, buf, len);
return ret;
}
static ssize_t jack_kctl_status_read(struct file *file,
char __user *to, size_t count, loff_t *ppos)
{
struct snd_jack_kctl *jack_kctl = file->private_data;
char buf[16];
int len, ret;
len = scnprintf(buf, sizeof(buf), "%s\n", jack_kctl->kctl->private_value ?
"Plugged" : "Unplugged");
ret = simple_read_from_buffer(to, count, ppos, buf, len);
return ret;
}
#ifdef CONFIG_SND_JACK_INPUT_DEV
static ssize_t jack_type_read(struct file *file,
char __user *to, size_t count, loff_t *ppos)
{
struct snd_jack_kctl *jack_kctl = file->private_data;
char buf[256];
int len, ret;
len = parse_mask_bits(jack_kctl->jack->type, buf, sizeof(buf));
ret = simple_read_from_buffer(to, count, ppos, buf, len);
return ret;
}
static const struct file_operations jack_type_fops = {
.open = simple_open,
.read = jack_type_read,
.llseek = default_llseek,
};
#endif
static const struct file_operations sw_inject_enable_fops = {
.open = simple_open,
.read = sw_inject_enable_read,
.write = sw_inject_enable_write,
.llseek = default_llseek,
};
static const struct file_operations jackin_inject_fops = {
.open = simple_open,
.write = jackin_inject_write,
.llseek = default_llseek,
};
static const struct file_operations jack_kctl_id_fops = {
.open = simple_open,
.read = jack_kctl_id_read,
.llseek = default_llseek,
};
static const struct file_operations jack_kctl_mask_bits_fops = {
.open = simple_open,
.read = jack_kctl_mask_bits_read,
.llseek = default_llseek,
};
static const struct file_operations jack_kctl_status_fops = {
.open = simple_open,
.read = jack_kctl_status_read,
.llseek = default_llseek,
};
static int snd_jack_debugfs_add_inject_node(struct snd_jack *jack,
struct snd_jack_kctl *jack_kctl)
{
char *tname;
int i;
/* Don't create injection interface for Phantom jacks */
if (strstr(jack_kctl->kctl->id.name, "Phantom"))
return 0;
tname = kstrdup(jack_kctl->kctl->id.name, GFP_KERNEL);
if (!tname)
return -ENOMEM;
/* replace the chars which are not suitable for folder's name with _ */
for (i = 0; tname[i]; i++)
if (!isalnum(tname[i]))
tname[i] = '_';
jack_kctl->jack_debugfs_root = debugfs_create_dir(tname, jack->card->debugfs_root);
kfree(tname);
debugfs_create_file("sw_inject_enable", 0644, jack_kctl->jack_debugfs_root, jack_kctl,
&sw_inject_enable_fops);
debugfs_create_file("jackin_inject", 0200, jack_kctl->jack_debugfs_root, jack_kctl,
&jackin_inject_fops);
debugfs_create_file("kctl_id", 0444, jack_kctl->jack_debugfs_root, jack_kctl,
&jack_kctl_id_fops);
debugfs_create_file("mask_bits", 0444, jack_kctl->jack_debugfs_root, jack_kctl,
&jack_kctl_mask_bits_fops);
debugfs_create_file("status", 0444, jack_kctl->jack_debugfs_root, jack_kctl,
&jack_kctl_status_fops);
#ifdef CONFIG_SND_JACK_INPUT_DEV
debugfs_create_file("type", 0444, jack_kctl->jack_debugfs_root, jack_kctl,
&jack_type_fops);
#endif
return 0;
}
static void snd_jack_debugfs_clear_inject_node(struct snd_jack_kctl *jack_kctl)
{
debugfs_remove(jack_kctl->jack_debugfs_root);
jack_kctl->jack_debugfs_root = NULL;
}
#else /* CONFIG_SND_JACK_INJECTION_DEBUG */
static int snd_jack_debugfs_add_inject_node(struct snd_jack *jack,
struct snd_jack_kctl *jack_kctl)
{
return 0;
}
static void snd_jack_debugfs_clear_inject_node(struct snd_jack_kctl *jack_kctl)
{
}
#endif /* CONFIG_SND_JACK_INJECTION_DEBUG */
static void snd_jack_kctl_private_free(struct snd_kcontrol *kctl)
{
struct snd_jack_kctl *jack_kctl;
jack_kctl = kctl->private_data;
if (jack_kctl) {
ALSA: jack: implement software jack injection via debugfs This change adds audio jack injection feature through debugfs, with this feature, we could validate alsa userspace changes by injecting plugin or plugout events to the non-phantom audio jacks. With this change, the sound core will build the folders $debugfs_mount_dir/sound/cardN if SND_DEBUG and DEBUG_FS are enabled. And if users also enable the SND_JACK_INJECTION_DEBUG, the jack injection nodes will be built in the folder cardN like below: $tree $debugfs_mount_dir/sound $debugfs_mount_dir/sound ├── card0 │   ├── HDMI_DP_pcm_10_Jack │   │   ├── jackin_inject │   │   ├── kctl_id │   │   ├── mask_bits │   │   ├── status │   │   ├── sw_inject_enable │   │   └── type ... │   └── HDMI_DP_pcm_9_Jack │   ├── jackin_inject │   ├── kctl_id │   ├── mask_bits │   ├── status │   ├── sw_inject_enable │   └── type └── card1 ├── HDMI_DP_pcm_5_Jack │   ├── jackin_inject │   ├── kctl_id │   ├── mask_bits │   ├── status │   ├── sw_inject_enable │   └── type ... ├── Headphone_Jack │   ├── jackin_inject │   ├── kctl_id │   ├── mask_bits │   ├── status │   ├── sw_inject_enable │   └── type └── Headset_Mic_Jack ├── jackin_inject ├── kctl_id ├── mask_bits ├── status ├── sw_inject_enable └── type The nodes kctl_id, mask_bits, status and type are read-only, users could check jack or jack_kctl's information through them. The nodes sw_inject_enable and jackin_inject are directly used for injection. The sw_inject_enable is read-write, users could check if software injection is enabled or not on this jack, and users could echo 1 or 0 to enable or disable software injection on this jack. Once the injection is enabled, the jack will not change by hardware events anymore, once the injection is disabled, the jack will restore the last reported hardware events to the jack. The jackin_inject is write-only, if the injection is enabled, users could echo 1 or 0 to this node to inject plugin or plugout events to this jack. For the detailed usage information on these nodes, please refer to Documentation/sound/designs/jack-injection.rst. Reviewed-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Jaroslav Kysela <perex@perex.cz> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Hui Wang <hui.wang@canonical.com> Link: https://lore.kernel.org/r/20210127085639.74954-2-hui.wang@canonical.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-01-27 08:56:39 +00:00
snd_jack_debugfs_clear_inject_node(jack_kctl);
list_del(&jack_kctl->list);
kfree(jack_kctl);
}
}
static void snd_jack_kctl_add(struct snd_jack *jack, struct snd_jack_kctl *jack_kctl)
{
ALSA: jack: implement software jack injection via debugfs This change adds audio jack injection feature through debugfs, with this feature, we could validate alsa userspace changes by injecting plugin or plugout events to the non-phantom audio jacks. With this change, the sound core will build the folders $debugfs_mount_dir/sound/cardN if SND_DEBUG and DEBUG_FS are enabled. And if users also enable the SND_JACK_INJECTION_DEBUG, the jack injection nodes will be built in the folder cardN like below: $tree $debugfs_mount_dir/sound $debugfs_mount_dir/sound ├── card0 │   ├── HDMI_DP_pcm_10_Jack │   │   ├── jackin_inject │   │   ├── kctl_id │   │   ├── mask_bits │   │   ├── status │   │   ├── sw_inject_enable │   │   └── type ... │   └── HDMI_DP_pcm_9_Jack │   ├── jackin_inject │   ├── kctl_id │   ├── mask_bits │   ├── status │   ├── sw_inject_enable │   └── type └── card1 ├── HDMI_DP_pcm_5_Jack │   ├── jackin_inject │   ├── kctl_id │   ├── mask_bits │   ├── status │   ├── sw_inject_enable │   └── type ... ├── Headphone_Jack │   ├── jackin_inject │   ├── kctl_id │   ├── mask_bits │   ├── status │   ├── sw_inject_enable │   └── type └── Headset_Mic_Jack ├── jackin_inject ├── kctl_id ├── mask_bits ├── status ├── sw_inject_enable └── type The nodes kctl_id, mask_bits, status and type are read-only, users could check jack or jack_kctl's information through them. The nodes sw_inject_enable and jackin_inject are directly used for injection. The sw_inject_enable is read-write, users could check if software injection is enabled or not on this jack, and users could echo 1 or 0 to enable or disable software injection on this jack. Once the injection is enabled, the jack will not change by hardware events anymore, once the injection is disabled, the jack will restore the last reported hardware events to the jack. The jackin_inject is write-only, if the injection is enabled, users could echo 1 or 0 to this node to inject plugin or plugout events to this jack. For the detailed usage information on these nodes, please refer to Documentation/sound/designs/jack-injection.rst. Reviewed-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Jaroslav Kysela <perex@perex.cz> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Hui Wang <hui.wang@canonical.com> Link: https://lore.kernel.org/r/20210127085639.74954-2-hui.wang@canonical.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-01-27 08:56:39 +00:00
jack_kctl->jack = jack;
list_add_tail(&jack_kctl->list, &jack->kctl_list);
ALSA: jack: implement software jack injection via debugfs This change adds audio jack injection feature through debugfs, with this feature, we could validate alsa userspace changes by injecting plugin or plugout events to the non-phantom audio jacks. With this change, the sound core will build the folders $debugfs_mount_dir/sound/cardN if SND_DEBUG and DEBUG_FS are enabled. And if users also enable the SND_JACK_INJECTION_DEBUG, the jack injection nodes will be built in the folder cardN like below: $tree $debugfs_mount_dir/sound $debugfs_mount_dir/sound ├── card0 │   ├── HDMI_DP_pcm_10_Jack │   │   ├── jackin_inject │   │   ├── kctl_id │   │   ├── mask_bits │   │   ├── status │   │   ├── sw_inject_enable │   │   └── type ... │   └── HDMI_DP_pcm_9_Jack │   ├── jackin_inject │   ├── kctl_id │   ├── mask_bits │   ├── status │   ├── sw_inject_enable │   └── type └── card1 ├── HDMI_DP_pcm_5_Jack │   ├── jackin_inject │   ├── kctl_id │   ├── mask_bits │   ├── status │   ├── sw_inject_enable │   └── type ... ├── Headphone_Jack │   ├── jackin_inject │   ├── kctl_id │   ├── mask_bits │   ├── status │   ├── sw_inject_enable │   └── type └── Headset_Mic_Jack ├── jackin_inject ├── kctl_id ├── mask_bits ├── status ├── sw_inject_enable └── type The nodes kctl_id, mask_bits, status and type are read-only, users could check jack or jack_kctl's information through them. The nodes sw_inject_enable and jackin_inject are directly used for injection. The sw_inject_enable is read-write, users could check if software injection is enabled or not on this jack, and users could echo 1 or 0 to enable or disable software injection on this jack. Once the injection is enabled, the jack will not change by hardware events anymore, once the injection is disabled, the jack will restore the last reported hardware events to the jack. The jackin_inject is write-only, if the injection is enabled, users could echo 1 or 0 to this node to inject plugin or plugout events to this jack. For the detailed usage information on these nodes, please refer to Documentation/sound/designs/jack-injection.rst. Reviewed-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Jaroslav Kysela <perex@perex.cz> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Hui Wang <hui.wang@canonical.com> Link: https://lore.kernel.org/r/20210127085639.74954-2-hui.wang@canonical.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-01-27 08:56:39 +00:00
snd_jack_debugfs_add_inject_node(jack, jack_kctl);
}
static struct snd_jack_kctl * snd_jack_kctl_new(struct snd_card *card, const char *name, unsigned int mask)
{
struct snd_kcontrol *kctl;
struct snd_jack_kctl *jack_kctl;
int err;
kctl = snd_kctl_jack_new(name, card);
if (!kctl)
return NULL;
err = snd_ctl_add(card, kctl);
if (err < 0)
return NULL;
jack_kctl = kzalloc(sizeof(*jack_kctl), GFP_KERNEL);
if (!jack_kctl)
goto error;
jack_kctl->kctl = kctl;
jack_kctl->mask_bits = mask;
kctl->private_data = jack_kctl;
kctl->private_free = snd_jack_kctl_private_free;
return jack_kctl;
error:
snd_ctl_free_one(kctl);
return NULL;
}
/**
* snd_jack_add_new_kctl - Create a new snd_jack_kctl and add it to jack
* @jack: the jack instance which the kctl will attaching to
* @name: the name for the snd_kcontrol object
* @mask: a bitmask of enum snd_jack_type values that can be detected
* by this snd_jack_kctl object.
*
* Creates a new snd_kcontrol object and adds it to the jack kctl_list.
*
* Return: Zero if successful, or a negative error code on failure.
*/
int snd_jack_add_new_kctl(struct snd_jack *jack, const char * name, int mask)
{
struct snd_jack_kctl *jack_kctl;
jack_kctl = snd_jack_kctl_new(jack->card, name, mask);
if (!jack_kctl)
return -ENOMEM;
snd_jack_kctl_add(jack, jack_kctl);
return 0;
}
EXPORT_SYMBOL(snd_jack_add_new_kctl);
/**
* snd_jack_new - Create a new jack
* @card: the card instance
* @id: an identifying string for this jack
* @type: a bitmask of enum snd_jack_type values that can be detected by
* this jack
* @jjack: Used to provide the allocated jack object to the caller.
* @initial_kctl: if true, create a kcontrol and add it to the jack list.
* @phantom_jack: Don't create a input device for phantom jacks.
*
* Creates a new jack object.
*
* Return: Zero if successful, or a negative error code on failure.
* On success @jjack will be initialised.
*/
int snd_jack_new(struct snd_card *card, const char *id, int type,
struct snd_jack **jjack, bool initial_kctl, bool phantom_jack)
{
struct snd_jack *jack;
struct snd_jack_kctl *jack_kctl = NULL;
int err;
static const struct snd_device_ops ops = {
.dev_free = snd_jack_dev_free,
#ifdef CONFIG_SND_JACK_INPUT_DEV
.dev_register = snd_jack_dev_register,
.dev_disconnect = snd_jack_dev_disconnect,
#endif /* CONFIG_SND_JACK_INPUT_DEV */
};
if (initial_kctl) {
jack_kctl = snd_jack_kctl_new(card, id, type);
if (!jack_kctl)
return -ENOMEM;
}
jack = kzalloc(sizeof(struct snd_jack), GFP_KERNEL);
if (jack == NULL)
return -ENOMEM;
jack->id = kstrdup(id, GFP_KERNEL);
/* don't creat input device for phantom jack */
if (!phantom_jack) {
#ifdef CONFIG_SND_JACK_INPUT_DEV
int i;
jack->input_dev = input_allocate_device();
if (jack->input_dev == NULL) {
err = -ENOMEM;
goto fail_input;
}
jack->input_dev->phys = "ALSA";
jack->type = type;
for (i = 0; i < SND_JACK_SWITCH_TYPES; i++)
if (type & (1 << i))
input_set_capability(jack->input_dev, EV_SW,
jack_switch_types[i]);
#endif /* CONFIG_SND_JACK_INPUT_DEV */
}
err = snd_device_new(card, SNDRV_DEV_JACK, jack, &ops);
if (err < 0)
goto fail_input;
jack->card = card;
INIT_LIST_HEAD(&jack->kctl_list);
if (initial_kctl)
snd_jack_kctl_add(jack, jack_kctl);
*jjack = jack;
return 0;
fail_input:
#ifdef CONFIG_SND_JACK_INPUT_DEV
input_free_device(jack->input_dev);
#endif
kfree(jack->id);
kfree(jack);
return err;
}
EXPORT_SYMBOL(snd_jack_new);
#ifdef CONFIG_SND_JACK_INPUT_DEV
/**
* snd_jack_set_parent - Set the parent device for a jack
*
* @jack: The jack to configure
* @parent: The device to set as parent for the jack.
*
* Set the parent for the jack devices in the device tree. This
* function is only valid prior to registration of the jack. If no
* parent is configured then the parent device will be the sound card.
*/
void snd_jack_set_parent(struct snd_jack *jack, struct device *parent)
{
WARN_ON(jack->registered);
if (!jack->input_dev)
return;
jack->input_dev->dev.parent = parent;
}
EXPORT_SYMBOL(snd_jack_set_parent);
/**
* snd_jack_set_key - Set a key mapping on a jack
*
* @jack: The jack to configure
* @type: Jack report type for this key
* @keytype: Input layer key type to be reported
*
* Map a SND_JACK_BTN_* button type to an input layer key, allowing
* reporting of keys on accessories via the jack abstraction. If no
* mapping is provided but keys are enabled in the jack type then
* BTN_n numeric buttons will be reported.
*
* If jacks are not reporting via the input API this call will have no
* effect.
*
* Note that this is intended to be use by simple devices with small
* numbers of keys that can be reported. It is also possible to
* access the input device directly - devices with complex input
* capabilities on accessories should consider doing this rather than
* using this abstraction.
*
* This function may only be called prior to registration of the jack.
*
* Return: Zero if successful, or a negative error code on failure.
*/
int snd_jack_set_key(struct snd_jack *jack, enum snd_jack_types type,
int keytype)
{
int key = fls(SND_JACK_BTN_0) - fls(type);
WARN_ON(jack->registered);
if (!keytype || key >= ARRAY_SIZE(jack->key))
return -EINVAL;
jack->type |= type;
jack->key[key] = keytype;
return 0;
}
EXPORT_SYMBOL(snd_jack_set_key);
#endif /* CONFIG_SND_JACK_INPUT_DEV */
/**
* snd_jack_report - Report the current status of a jack
*
* @jack: The jack to report status for
* @status: The current status of the jack
*/
void snd_jack_report(struct snd_jack *jack, int status)
{
struct snd_jack_kctl *jack_kctl;
ALSA: jack: implement software jack injection via debugfs This change adds audio jack injection feature through debugfs, with this feature, we could validate alsa userspace changes by injecting plugin or plugout events to the non-phantom audio jacks. With this change, the sound core will build the folders $debugfs_mount_dir/sound/cardN if SND_DEBUG and DEBUG_FS are enabled. And if users also enable the SND_JACK_INJECTION_DEBUG, the jack injection nodes will be built in the folder cardN like below: $tree $debugfs_mount_dir/sound $debugfs_mount_dir/sound ├── card0 │   ├── HDMI_DP_pcm_10_Jack │   │   ├── jackin_inject │   │   ├── kctl_id │   │   ├── mask_bits │   │   ├── status │   │   ├── sw_inject_enable │   │   └── type ... │   └── HDMI_DP_pcm_9_Jack │   ├── jackin_inject │   ├── kctl_id │   ├── mask_bits │   ├── status │   ├── sw_inject_enable │   └── type └── card1 ├── HDMI_DP_pcm_5_Jack │   ├── jackin_inject │   ├── kctl_id │   ├── mask_bits │   ├── status │   ├── sw_inject_enable │   └── type ... ├── Headphone_Jack │   ├── jackin_inject │   ├── kctl_id │   ├── mask_bits │   ├── status │   ├── sw_inject_enable │   └── type └── Headset_Mic_Jack ├── jackin_inject ├── kctl_id ├── mask_bits ├── status ├── sw_inject_enable └── type The nodes kctl_id, mask_bits, status and type are read-only, users could check jack or jack_kctl's information through them. The nodes sw_inject_enable and jackin_inject are directly used for injection. The sw_inject_enable is read-write, users could check if software injection is enabled or not on this jack, and users could echo 1 or 0 to enable or disable software injection on this jack. Once the injection is enabled, the jack will not change by hardware events anymore, once the injection is disabled, the jack will restore the last reported hardware events to the jack. The jackin_inject is write-only, if the injection is enabled, users could echo 1 or 0 to this node to inject plugin or plugout events to this jack. For the detailed usage information on these nodes, please refer to Documentation/sound/designs/jack-injection.rst. Reviewed-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Jaroslav Kysela <perex@perex.cz> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Hui Wang <hui.wang@canonical.com> Link: https://lore.kernel.org/r/20210127085639.74954-2-hui.wang@canonical.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-01-27 08:56:39 +00:00
unsigned int mask_bits = 0;
#ifdef CONFIG_SND_JACK_INPUT_DEV
int i;
#endif
if (!jack)
return;
ALSA: jack: implement software jack injection via debugfs This change adds audio jack injection feature through debugfs, with this feature, we could validate alsa userspace changes by injecting plugin or plugout events to the non-phantom audio jacks. With this change, the sound core will build the folders $debugfs_mount_dir/sound/cardN if SND_DEBUG and DEBUG_FS are enabled. And if users also enable the SND_JACK_INJECTION_DEBUG, the jack injection nodes will be built in the folder cardN like below: $tree $debugfs_mount_dir/sound $debugfs_mount_dir/sound ├── card0 │   ├── HDMI_DP_pcm_10_Jack │   │   ├── jackin_inject │   │   ├── kctl_id │   │   ├── mask_bits │   │   ├── status │   │   ├── sw_inject_enable │   │   └── type ... │   └── HDMI_DP_pcm_9_Jack │   ├── jackin_inject │   ├── kctl_id │   ├── mask_bits │   ├── status │   ├── sw_inject_enable │   └── type └── card1 ├── HDMI_DP_pcm_5_Jack │   ├── jackin_inject │   ├── kctl_id │   ├── mask_bits │   ├── status │   ├── sw_inject_enable │   └── type ... ├── Headphone_Jack │   ├── jackin_inject │   ├── kctl_id │   ├── mask_bits │   ├── status │   ├── sw_inject_enable │   └── type └── Headset_Mic_Jack ├── jackin_inject ├── kctl_id ├── mask_bits ├── status ├── sw_inject_enable └── type The nodes kctl_id, mask_bits, status and type are read-only, users could check jack or jack_kctl's information through them. The nodes sw_inject_enable and jackin_inject are directly used for injection. The sw_inject_enable is read-write, users could check if software injection is enabled or not on this jack, and users could echo 1 or 0 to enable or disable software injection on this jack. Once the injection is enabled, the jack will not change by hardware events anymore, once the injection is disabled, the jack will restore the last reported hardware events to the jack. The jackin_inject is write-only, if the injection is enabled, users could echo 1 or 0 to this node to inject plugin or plugout events to this jack. For the detailed usage information on these nodes, please refer to Documentation/sound/designs/jack-injection.rst. Reviewed-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Jaroslav Kysela <perex@perex.cz> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Hui Wang <hui.wang@canonical.com> Link: https://lore.kernel.org/r/20210127085639.74954-2-hui.wang@canonical.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-01-27 08:56:39 +00:00
jack->hw_status_cache = status;
list_for_each_entry(jack_kctl, &jack->kctl_list, list)
ALSA: jack: implement software jack injection via debugfs This change adds audio jack injection feature through debugfs, with this feature, we could validate alsa userspace changes by injecting plugin or plugout events to the non-phantom audio jacks. With this change, the sound core will build the folders $debugfs_mount_dir/sound/cardN if SND_DEBUG and DEBUG_FS are enabled. And if users also enable the SND_JACK_INJECTION_DEBUG, the jack injection nodes will be built in the folder cardN like below: $tree $debugfs_mount_dir/sound $debugfs_mount_dir/sound ├── card0 │   ├── HDMI_DP_pcm_10_Jack │   │   ├── jackin_inject │   │   ├── kctl_id │   │   ├── mask_bits │   │   ├── status │   │   ├── sw_inject_enable │   │   └── type ... │   └── HDMI_DP_pcm_9_Jack │   ├── jackin_inject │   ├── kctl_id │   ├── mask_bits │   ├── status │   ├── sw_inject_enable │   └── type └── card1 ├── HDMI_DP_pcm_5_Jack │   ├── jackin_inject │   ├── kctl_id │   ├── mask_bits │   ├── status │   ├── sw_inject_enable │   └── type ... ├── Headphone_Jack │   ├── jackin_inject │   ├── kctl_id │   ├── mask_bits │   ├── status │   ├── sw_inject_enable │   └── type └── Headset_Mic_Jack ├── jackin_inject ├── kctl_id ├── mask_bits ├── status ├── sw_inject_enable └── type The nodes kctl_id, mask_bits, status and type are read-only, users could check jack or jack_kctl's information through them. The nodes sw_inject_enable and jackin_inject are directly used for injection. The sw_inject_enable is read-write, users could check if software injection is enabled or not on this jack, and users could echo 1 or 0 to enable or disable software injection on this jack. Once the injection is enabled, the jack will not change by hardware events anymore, once the injection is disabled, the jack will restore the last reported hardware events to the jack. The jackin_inject is write-only, if the injection is enabled, users could echo 1 or 0 to this node to inject plugin or plugout events to this jack. For the detailed usage information on these nodes, please refer to Documentation/sound/designs/jack-injection.rst. Reviewed-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Jaroslav Kysela <perex@perex.cz> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Hui Wang <hui.wang@canonical.com> Link: https://lore.kernel.org/r/20210127085639.74954-2-hui.wang@canonical.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-01-27 08:56:39 +00:00
if (jack_kctl->sw_inject_enable)
mask_bits |= jack_kctl->mask_bits;
else
snd_kctl_jack_report(jack->card, jack_kctl->kctl,
status & jack_kctl->mask_bits);
#ifdef CONFIG_SND_JACK_INPUT_DEV
if (!jack->input_dev)
return;
for (i = 0; i < ARRAY_SIZE(jack->key); i++) {
ALSA: jack: implement software jack injection via debugfs This change adds audio jack injection feature through debugfs, with this feature, we could validate alsa userspace changes by injecting plugin or plugout events to the non-phantom audio jacks. With this change, the sound core will build the folders $debugfs_mount_dir/sound/cardN if SND_DEBUG and DEBUG_FS are enabled. And if users also enable the SND_JACK_INJECTION_DEBUG, the jack injection nodes will be built in the folder cardN like below: $tree $debugfs_mount_dir/sound $debugfs_mount_dir/sound ├── card0 │   ├── HDMI_DP_pcm_10_Jack │   │   ├── jackin_inject │   │   ├── kctl_id │   │   ├── mask_bits │   │   ├── status │   │   ├── sw_inject_enable │   │   └── type ... │   └── HDMI_DP_pcm_9_Jack │   ├── jackin_inject │   ├── kctl_id │   ├── mask_bits │   ├── status │   ├── sw_inject_enable │   └── type └── card1 ├── HDMI_DP_pcm_5_Jack │   ├── jackin_inject │   ├── kctl_id │   ├── mask_bits │   ├── status │   ├── sw_inject_enable │   └── type ... ├── Headphone_Jack │   ├── jackin_inject │   ├── kctl_id │   ├── mask_bits │   ├── status │   ├── sw_inject_enable │   └── type └── Headset_Mic_Jack ├── jackin_inject ├── kctl_id ├── mask_bits ├── status ├── sw_inject_enable └── type The nodes kctl_id, mask_bits, status and type are read-only, users could check jack or jack_kctl's information through them. The nodes sw_inject_enable and jackin_inject are directly used for injection. The sw_inject_enable is read-write, users could check if software injection is enabled or not on this jack, and users could echo 1 or 0 to enable or disable software injection on this jack. Once the injection is enabled, the jack will not change by hardware events anymore, once the injection is disabled, the jack will restore the last reported hardware events to the jack. The jackin_inject is write-only, if the injection is enabled, users could echo 1 or 0 to this node to inject plugin or plugout events to this jack. For the detailed usage information on these nodes, please refer to Documentation/sound/designs/jack-injection.rst. Reviewed-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Jaroslav Kysela <perex@perex.cz> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Hui Wang <hui.wang@canonical.com> Link: https://lore.kernel.org/r/20210127085639.74954-2-hui.wang@canonical.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-01-27 08:56:39 +00:00
int testbit = ((SND_JACK_BTN_0 >> i) & ~mask_bits);
if (jack->type & testbit)
input_report_key(jack->input_dev, jack->key[i],
status & testbit);
}
for (i = 0; i < ARRAY_SIZE(jack_switch_types); i++) {
ALSA: jack: implement software jack injection via debugfs This change adds audio jack injection feature through debugfs, with this feature, we could validate alsa userspace changes by injecting plugin or plugout events to the non-phantom audio jacks. With this change, the sound core will build the folders $debugfs_mount_dir/sound/cardN if SND_DEBUG and DEBUG_FS are enabled. And if users also enable the SND_JACK_INJECTION_DEBUG, the jack injection nodes will be built in the folder cardN like below: $tree $debugfs_mount_dir/sound $debugfs_mount_dir/sound ├── card0 │   ├── HDMI_DP_pcm_10_Jack │   │   ├── jackin_inject │   │   ├── kctl_id │   │   ├── mask_bits │   │   ├── status │   │   ├── sw_inject_enable │   │   └── type ... │   └── HDMI_DP_pcm_9_Jack │   ├── jackin_inject │   ├── kctl_id │   ├── mask_bits │   ├── status │   ├── sw_inject_enable │   └── type └── card1 ├── HDMI_DP_pcm_5_Jack │   ├── jackin_inject │   ├── kctl_id │   ├── mask_bits │   ├── status │   ├── sw_inject_enable │   └── type ... ├── Headphone_Jack │   ├── jackin_inject │   ├── kctl_id │   ├── mask_bits │   ├── status │   ├── sw_inject_enable │   └── type └── Headset_Mic_Jack ├── jackin_inject ├── kctl_id ├── mask_bits ├── status ├── sw_inject_enable └── type The nodes kctl_id, mask_bits, status and type are read-only, users could check jack or jack_kctl's information through them. The nodes sw_inject_enable and jackin_inject are directly used for injection. The sw_inject_enable is read-write, users could check if software injection is enabled or not on this jack, and users could echo 1 or 0 to enable or disable software injection on this jack. Once the injection is enabled, the jack will not change by hardware events anymore, once the injection is disabled, the jack will restore the last reported hardware events to the jack. The jackin_inject is write-only, if the injection is enabled, users could echo 1 or 0 to this node to inject plugin or plugout events to this jack. For the detailed usage information on these nodes, please refer to Documentation/sound/designs/jack-injection.rst. Reviewed-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Jaroslav Kysela <perex@perex.cz> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Hui Wang <hui.wang@canonical.com> Link: https://lore.kernel.org/r/20210127085639.74954-2-hui.wang@canonical.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-01-27 08:56:39 +00:00
int testbit = ((1 << i) & ~mask_bits);
if (jack->type & testbit)
input_report_switch(jack->input_dev,
jack_switch_types[i],
status & testbit);
}
input_sync(jack->input_dev);
#endif /* CONFIG_SND_JACK_INPUT_DEV */
}
EXPORT_SYMBOL(snd_jack_report);