2023-01-25 20:00:44 +00:00
|
|
|
// SPDX-License-Identifier: GPL-2.0-only
|
dm ima: measure data on table load
DM configures a block device with various target specific attributes
passed to it as a table. DM loads the table, and calls each target’s
respective constructors with the attributes as input parameters.
Some of these attributes are critical to ensure the device meets
certain security bar. Thus, IMA should measure these attributes, to
ensure they are not tampered with, during the lifetime of the device.
So that the external services can have high confidence in the
configuration of the block-devices on a given system.
Some devices may have large tables. And a given device may change its
state (table-load, suspend, resume, rename, remove, table-clear etc.)
many times. Measuring these attributes each time when the device
changes its state will significantly increase the size of the IMA logs.
Further, once configured, these attributes are not expected to change
unless a new table is loaded, or a device is removed and recreated.
Therefore the clear-text of the attributes should only be measured
during table load, and the hash of the active/inactive table should be
measured for the remaining device state changes.
Export IMA function ima_measure_critical_data() to allow measurement
of DM device parameters, as well as target specific attributes, during
table load. Compute the hash of the inactive table and store it for
measurements during future state change. If a load is called multiple
times, update the inactive table hash with the hash of the latest
populated table. So that the correct inactive table hash is measured
when the device transitions to different states like resume, remove,
rename, etc.
Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com> # leak fix
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-07-13 00:48:58 +00:00
|
|
|
/*
|
|
|
|
* Copyright (C) 2021 Microsoft Corporation
|
|
|
|
*
|
|
|
|
* Author: Tushar Sugandhi <tusharsu@linux.microsoft.com>
|
|
|
|
*
|
2023-02-07 19:56:57 +00:00
|
|
|
* Enables IMA measurements for DM targets
|
dm ima: measure data on table load
DM configures a block device with various target specific attributes
passed to it as a table. DM loads the table, and calls each target’s
respective constructors with the attributes as input parameters.
Some of these attributes are critical to ensure the device meets
certain security bar. Thus, IMA should measure these attributes, to
ensure they are not tampered with, during the lifetime of the device.
So that the external services can have high confidence in the
configuration of the block-devices on a given system.
Some devices may have large tables. And a given device may change its
state (table-load, suspend, resume, rename, remove, table-clear etc.)
many times. Measuring these attributes each time when the device
changes its state will significantly increase the size of the IMA logs.
Further, once configured, these attributes are not expected to change
unless a new table is loaded, or a device is removed and recreated.
Therefore the clear-text of the attributes should only be measured
during table load, and the hash of the active/inactive table should be
measured for the remaining device state changes.
Export IMA function ima_measure_critical_data() to allow measurement
of DM device parameters, as well as target specific attributes, during
table load. Compute the hash of the inactive table and store it for
measurements during future state change. If a load is called multiple
times, update the inactive table hash with the hash of the latest
populated table. So that the correct inactive table hash is measured
when the device transitions to different states like resume, remove,
rename, etc.
Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com> # leak fix
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-07-13 00:48:58 +00:00
|
|
|
*/
|
|
|
|
|
|
|
|
#include "dm-core.h"
|
|
|
|
#include "dm-ima.h"
|
|
|
|
|
|
|
|
#include <linux/ima.h>
|
2021-09-20 12:33:13 +00:00
|
|
|
#include <linux/sched/mm.h>
|
dm ima: measure data on table load
DM configures a block device with various target specific attributes
passed to it as a table. DM loads the table, and calls each target’s
respective constructors with the attributes as input parameters.
Some of these attributes are critical to ensure the device meets
certain security bar. Thus, IMA should measure these attributes, to
ensure they are not tampered with, during the lifetime of the device.
So that the external services can have high confidence in the
configuration of the block-devices on a given system.
Some devices may have large tables. And a given device may change its
state (table-load, suspend, resume, rename, remove, table-clear etc.)
many times. Measuring these attributes each time when the device
changes its state will significantly increase the size of the IMA logs.
Further, once configured, these attributes are not expected to change
unless a new table is loaded, or a device is removed and recreated.
Therefore the clear-text of the attributes should only be measured
during table load, and the hash of the active/inactive table should be
measured for the remaining device state changes.
Export IMA function ima_measure_critical_data() to allow measurement
of DM device parameters, as well as target specific attributes, during
table load. Compute the hash of the inactive table and store it for
measurements during future state change. If a load is called multiple
times, update the inactive table hash with the hash of the latest
populated table. So that the correct inactive table hash is measured
when the device transitions to different states like resume, remove,
rename, etc.
Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com> # leak fix
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-07-13 00:48:58 +00:00
|
|
|
#include <crypto/hash.h>
|
|
|
|
#include <linux/crypto.h>
|
|
|
|
#include <crypto/hash_info.h>
|
|
|
|
|
|
|
|
#define DM_MSG_PREFIX "ima"
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Internal function to prefix separator characters in input buffer with escape
|
|
|
|
* character, so that they don't interfere with the construction of key-value pairs,
|
|
|
|
* and clients can split the key1=val1,key2=val2,key3=val3; pairs properly.
|
|
|
|
*/
|
|
|
|
static void fix_separator_chars(char **buf)
|
|
|
|
{
|
|
|
|
int l = strlen(*buf);
|
|
|
|
int i, j, sp = 0;
|
|
|
|
|
|
|
|
for (i = 0; i < l; i++)
|
|
|
|
if ((*buf)[i] == '\\' || (*buf)[i] == ';' || (*buf)[i] == '=' || (*buf)[i] == ',')
|
|
|
|
sp++;
|
|
|
|
|
|
|
|
if (!sp)
|
|
|
|
return;
|
|
|
|
|
|
|
|
for (i = l-1, j = i+sp; i >= 0; i--) {
|
|
|
|
(*buf)[j--] = (*buf)[i];
|
|
|
|
if ((*buf)[i] == '\\' || (*buf)[i] == ';' || (*buf)[i] == '=' || (*buf)[i] == ',')
|
|
|
|
(*buf)[j--] = '\\';
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Internal function to allocate memory for IMA measurements.
|
|
|
|
*/
|
|
|
|
static void *dm_ima_alloc(size_t len, gfp_t flags, bool noio)
|
|
|
|
{
|
|
|
|
unsigned int noio_flag;
|
|
|
|
void *ptr;
|
|
|
|
|
|
|
|
if (noio)
|
|
|
|
noio_flag = memalloc_noio_save();
|
|
|
|
|
|
|
|
ptr = kzalloc(len, flags);
|
|
|
|
|
|
|
|
if (noio)
|
|
|
|
memalloc_noio_restore(noio_flag);
|
|
|
|
|
|
|
|
return ptr;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Internal function to allocate and copy name and uuid for IMA measurements.
|
|
|
|
*/
|
|
|
|
static int dm_ima_alloc_and_copy_name_uuid(struct mapped_device *md, char **dev_name,
|
|
|
|
char **dev_uuid, bool noio)
|
|
|
|
{
|
|
|
|
int r;
|
|
|
|
*dev_name = dm_ima_alloc(DM_NAME_LEN*2, GFP_KERNEL, noio);
|
|
|
|
if (!(*dev_name)) {
|
|
|
|
r = -ENOMEM;
|
|
|
|
goto error;
|
|
|
|
}
|
|
|
|
|
|
|
|
*dev_uuid = dm_ima_alloc(DM_UUID_LEN*2, GFP_KERNEL, noio);
|
|
|
|
if (!(*dev_uuid)) {
|
|
|
|
r = -ENOMEM;
|
|
|
|
goto error;
|
|
|
|
}
|
|
|
|
|
|
|
|
r = dm_copy_name_and_uuid(md, *dev_name, *dev_uuid);
|
|
|
|
if (r)
|
|
|
|
goto error;
|
|
|
|
|
|
|
|
fix_separator_chars(dev_name);
|
|
|
|
fix_separator_chars(dev_uuid);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
error:
|
|
|
|
kfree(*dev_name);
|
|
|
|
kfree(*dev_uuid);
|
|
|
|
*dev_name = NULL;
|
|
|
|
*dev_uuid = NULL;
|
|
|
|
return r;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Internal function to allocate and copy device data for IMA measurements.
|
|
|
|
*/
|
|
|
|
static int dm_ima_alloc_and_copy_device_data(struct mapped_device *md, char **device_data,
|
|
|
|
unsigned int num_targets, bool noio)
|
|
|
|
{
|
|
|
|
char *dev_name = NULL, *dev_uuid = NULL;
|
|
|
|
int r;
|
|
|
|
|
|
|
|
r = dm_ima_alloc_and_copy_name_uuid(md, &dev_name, &dev_uuid, noio);
|
|
|
|
if (r)
|
|
|
|
return r;
|
|
|
|
|
|
|
|
*device_data = dm_ima_alloc(DM_IMA_DEVICE_BUF_LEN, GFP_KERNEL, noio);
|
|
|
|
if (!(*device_data)) {
|
|
|
|
r = -ENOMEM;
|
|
|
|
goto error;
|
|
|
|
}
|
|
|
|
|
|
|
|
scnprintf(*device_data, DM_IMA_DEVICE_BUF_LEN,
|
|
|
|
"name=%s,uuid=%s,major=%d,minor=%d,minor_count=%d,num_targets=%u;",
|
|
|
|
dev_name, dev_uuid, md->disk->major, md->disk->first_minor,
|
|
|
|
md->disk->minors, num_targets);
|
|
|
|
error:
|
|
|
|
kfree(dev_name);
|
|
|
|
kfree(dev_uuid);
|
|
|
|
return r;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Internal wrapper function to call IMA to measure DM data.
|
|
|
|
*/
|
|
|
|
static void dm_ima_measure_data(const char *event_name, const void *buf, size_t buf_len,
|
|
|
|
bool noio)
|
|
|
|
{
|
|
|
|
unsigned int noio_flag;
|
|
|
|
|
|
|
|
if (noio)
|
|
|
|
noio_flag = memalloc_noio_save();
|
|
|
|
|
2021-09-02 19:51:41 +00:00
|
|
|
ima_measure_critical_data(DM_NAME, event_name, buf, buf_len,
|
|
|
|
false, NULL, 0);
|
dm ima: measure data on table load
DM configures a block device with various target specific attributes
passed to it as a table. DM loads the table, and calls each target’s
respective constructors with the attributes as input parameters.
Some of these attributes are critical to ensure the device meets
certain security bar. Thus, IMA should measure these attributes, to
ensure they are not tampered with, during the lifetime of the device.
So that the external services can have high confidence in the
configuration of the block-devices on a given system.
Some devices may have large tables. And a given device may change its
state (table-load, suspend, resume, rename, remove, table-clear etc.)
many times. Measuring these attributes each time when the device
changes its state will significantly increase the size of the IMA logs.
Further, once configured, these attributes are not expected to change
unless a new table is loaded, or a device is removed and recreated.
Therefore the clear-text of the attributes should only be measured
during table load, and the hash of the active/inactive table should be
measured for the remaining device state changes.
Export IMA function ima_measure_critical_data() to allow measurement
of DM device parameters, as well as target specific attributes, during
table load. Compute the hash of the inactive table and store it for
measurements during future state change. If a load is called multiple
times, update the inactive table hash with the hash of the latest
populated table. So that the correct inactive table hash is measured
when the device transitions to different states like resume, remove,
rename, etc.
Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com> # leak fix
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-07-13 00:48:58 +00:00
|
|
|
|
|
|
|
if (noio)
|
|
|
|
memalloc_noio_restore(noio_flag);
|
|
|
|
}
|
|
|
|
|
dm ima: measure data on device resume
A given block device can load a table multiple times, with different
input parameters, before eventually resuming it. Further, a device may
be suspended and then resumed. The device may never resume after a
table-load. Because of the above valid scenarios for a given device,
it is important to measure and log the device resume event using IMA.
Also, if the table is large, measuring it in clear-text each time the
device changes state, will unnecessarily increase the size of IMA log.
Since the table clear-text is already measured during table-load event,
measuring the hash during resume should be sufficient to validate the
table contents.
Measure the device parameters, and hash of the active table, when the
device is resumed.
Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-07-13 00:48:59 +00:00
|
|
|
/*
|
|
|
|
* Internal function to allocate and copy current device capacity for IMA measurements.
|
|
|
|
*/
|
|
|
|
static int dm_ima_alloc_and_copy_capacity_str(struct mapped_device *md, char **capacity_str,
|
|
|
|
bool noio)
|
|
|
|
{
|
|
|
|
sector_t capacity;
|
|
|
|
|
|
|
|
capacity = get_capacity(md->disk);
|
|
|
|
|
|
|
|
*capacity_str = dm_ima_alloc(DM_IMA_DEVICE_CAPACITY_BUF_LEN, GFP_KERNEL, noio);
|
|
|
|
if (!(*capacity_str))
|
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
scnprintf(*capacity_str, DM_IMA_DEVICE_BUF_LEN, "current_device_capacity=%llu;",
|
|
|
|
capacity);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
dm ima: measure data on table load
DM configures a block device with various target specific attributes
passed to it as a table. DM loads the table, and calls each target’s
respective constructors with the attributes as input parameters.
Some of these attributes are critical to ensure the device meets
certain security bar. Thus, IMA should measure these attributes, to
ensure they are not tampered with, during the lifetime of the device.
So that the external services can have high confidence in the
configuration of the block-devices on a given system.
Some devices may have large tables. And a given device may change its
state (table-load, suspend, resume, rename, remove, table-clear etc.)
many times. Measuring these attributes each time when the device
changes its state will significantly increase the size of the IMA logs.
Further, once configured, these attributes are not expected to change
unless a new table is loaded, or a device is removed and recreated.
Therefore the clear-text of the attributes should only be measured
during table load, and the hash of the active/inactive table should be
measured for the remaining device state changes.
Export IMA function ima_measure_critical_data() to allow measurement
of DM device parameters, as well as target specific attributes, during
table load. Compute the hash of the inactive table and store it for
measurements during future state change. If a load is called multiple
times, update the inactive table hash with the hash of the latest
populated table. So that the correct inactive table hash is measured
when the device transitions to different states like resume, remove,
rename, etc.
Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com> # leak fix
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-07-13 00:48:58 +00:00
|
|
|
/*
|
|
|
|
* Initialize/reset the dm ima related data structure variables.
|
|
|
|
*/
|
|
|
|
void dm_ima_reset_data(struct mapped_device *md)
|
|
|
|
{
|
|
|
|
memset(&(md->ima), 0, sizeof(md->ima));
|
2021-08-13 21:37:57 +00:00
|
|
|
md->ima.dm_version_str_len = strlen(DM_IMA_VERSION_STR);
|
dm ima: measure data on table load
DM configures a block device with various target specific attributes
passed to it as a table. DM loads the table, and calls each target’s
respective constructors with the attributes as input parameters.
Some of these attributes are critical to ensure the device meets
certain security bar. Thus, IMA should measure these attributes, to
ensure they are not tampered with, during the lifetime of the device.
So that the external services can have high confidence in the
configuration of the block-devices on a given system.
Some devices may have large tables. And a given device may change its
state (table-load, suspend, resume, rename, remove, table-clear etc.)
many times. Measuring these attributes each time when the device
changes its state will significantly increase the size of the IMA logs.
Further, once configured, these attributes are not expected to change
unless a new table is loaded, or a device is removed and recreated.
Therefore the clear-text of the attributes should only be measured
during table load, and the hash of the active/inactive table should be
measured for the remaining device state changes.
Export IMA function ima_measure_critical_data() to allow measurement
of DM device parameters, as well as target specific attributes, during
table load. Compute the hash of the inactive table and store it for
measurements during future state change. If a load is called multiple
times, update the inactive table hash with the hash of the latest
populated table. So that the correct inactive table hash is measured
when the device transitions to different states like resume, remove,
rename, etc.
Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com> # leak fix
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-07-13 00:48:58 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Build up the IMA data for each target, and finally measure.
|
|
|
|
*/
|
|
|
|
void dm_ima_measure_on_table_load(struct dm_table *table, unsigned int status_flags)
|
|
|
|
{
|
|
|
|
size_t device_data_buf_len, target_metadata_buf_len, target_data_buf_len, l = 0;
|
|
|
|
char *target_metadata_buf = NULL, *target_data_buf = NULL, *digest_buf = NULL;
|
|
|
|
char *ima_buf = NULL, *device_data_buf = NULL;
|
|
|
|
int digest_size, last_target_measured = -1, r;
|
|
|
|
status_type_t type = STATUSTYPE_IMA;
|
|
|
|
size_t cur_total_buf_len = 0;
|
|
|
|
unsigned int num_targets, i;
|
|
|
|
SHASH_DESC_ON_STACK(shash, NULL);
|
|
|
|
struct crypto_shash *tfm = NULL;
|
|
|
|
u8 *digest = NULL;
|
|
|
|
bool noio = false;
|
2021-08-13 21:37:56 +00:00
|
|
|
/*
|
|
|
|
* In below hash_alg_prefix_len assignment +1 is for the additional char (':'),
|
|
|
|
* when prefixing the hash value with the hash algorithm name. e.g. sha256:<hash_value>.
|
|
|
|
*/
|
|
|
|
const size_t hash_alg_prefix_len = strlen(DM_IMA_TABLE_HASH_ALG) + 1;
|
2021-08-13 21:37:58 +00:00
|
|
|
char table_load_event_name[] = "dm_table_load";
|
dm ima: measure data on table load
DM configures a block device with various target specific attributes
passed to it as a table. DM loads the table, and calls each target’s
respective constructors with the attributes as input parameters.
Some of these attributes are critical to ensure the device meets
certain security bar. Thus, IMA should measure these attributes, to
ensure they are not tampered with, during the lifetime of the device.
So that the external services can have high confidence in the
configuration of the block-devices on a given system.
Some devices may have large tables. And a given device may change its
state (table-load, suspend, resume, rename, remove, table-clear etc.)
many times. Measuring these attributes each time when the device
changes its state will significantly increase the size of the IMA logs.
Further, once configured, these attributes are not expected to change
unless a new table is loaded, or a device is removed and recreated.
Therefore the clear-text of the attributes should only be measured
during table load, and the hash of the active/inactive table should be
measured for the remaining device state changes.
Export IMA function ima_measure_critical_data() to allow measurement
of DM device parameters, as well as target specific attributes, during
table load. Compute the hash of the inactive table and store it for
measurements during future state change. If a load is called multiple
times, update the inactive table hash with the hash of the latest
populated table. So that the correct inactive table hash is measured
when the device transitions to different states like resume, remove,
rename, etc.
Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com> # leak fix
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-07-13 00:48:58 +00:00
|
|
|
|
|
|
|
ima_buf = dm_ima_alloc(DM_IMA_MEASUREMENT_BUF_LEN, GFP_KERNEL, noio);
|
|
|
|
if (!ima_buf)
|
|
|
|
return;
|
|
|
|
|
|
|
|
target_metadata_buf = dm_ima_alloc(DM_IMA_TARGET_METADATA_BUF_LEN, GFP_KERNEL, noio);
|
|
|
|
if (!target_metadata_buf)
|
|
|
|
goto error;
|
|
|
|
|
|
|
|
target_data_buf = dm_ima_alloc(DM_IMA_TARGET_DATA_BUF_LEN, GFP_KERNEL, noio);
|
|
|
|
if (!target_data_buf)
|
|
|
|
goto error;
|
|
|
|
|
2022-07-05 18:00:36 +00:00
|
|
|
num_targets = table->num_targets;
|
dm ima: measure data on table load
DM configures a block device with various target specific attributes
passed to it as a table. DM loads the table, and calls each target’s
respective constructors with the attributes as input parameters.
Some of these attributes are critical to ensure the device meets
certain security bar. Thus, IMA should measure these attributes, to
ensure they are not tampered with, during the lifetime of the device.
So that the external services can have high confidence in the
configuration of the block-devices on a given system.
Some devices may have large tables. And a given device may change its
state (table-load, suspend, resume, rename, remove, table-clear etc.)
many times. Measuring these attributes each time when the device
changes its state will significantly increase the size of the IMA logs.
Further, once configured, these attributes are not expected to change
unless a new table is loaded, or a device is removed and recreated.
Therefore the clear-text of the attributes should only be measured
during table load, and the hash of the active/inactive table should be
measured for the remaining device state changes.
Export IMA function ima_measure_critical_data() to allow measurement
of DM device parameters, as well as target specific attributes, during
table load. Compute the hash of the inactive table and store it for
measurements during future state change. If a load is called multiple
times, update the inactive table hash with the hash of the latest
populated table. So that the correct inactive table hash is measured
when the device transitions to different states like resume, remove,
rename, etc.
Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com> # leak fix
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-07-13 00:48:58 +00:00
|
|
|
|
|
|
|
if (dm_ima_alloc_and_copy_device_data(table->md, &device_data_buf, num_targets, noio))
|
|
|
|
goto error;
|
|
|
|
|
2021-08-13 21:37:56 +00:00
|
|
|
tfm = crypto_alloc_shash(DM_IMA_TABLE_HASH_ALG, 0, 0);
|
dm ima: measure data on table load
DM configures a block device with various target specific attributes
passed to it as a table. DM loads the table, and calls each target’s
respective constructors with the attributes as input parameters.
Some of these attributes are critical to ensure the device meets
certain security bar. Thus, IMA should measure these attributes, to
ensure they are not tampered with, during the lifetime of the device.
So that the external services can have high confidence in the
configuration of the block-devices on a given system.
Some devices may have large tables. And a given device may change its
state (table-load, suspend, resume, rename, remove, table-clear etc.)
many times. Measuring these attributes each time when the device
changes its state will significantly increase the size of the IMA logs.
Further, once configured, these attributes are not expected to change
unless a new table is loaded, or a device is removed and recreated.
Therefore the clear-text of the attributes should only be measured
during table load, and the hash of the active/inactive table should be
measured for the remaining device state changes.
Export IMA function ima_measure_critical_data() to allow measurement
of DM device parameters, as well as target specific attributes, during
table load. Compute the hash of the inactive table and store it for
measurements during future state change. If a load is called multiple
times, update the inactive table hash with the hash of the latest
populated table. So that the correct inactive table hash is measured
when the device transitions to different states like resume, remove,
rename, etc.
Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com> # leak fix
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-07-13 00:48:58 +00:00
|
|
|
if (IS_ERR(tfm))
|
|
|
|
goto error;
|
|
|
|
|
|
|
|
shash->tfm = tfm;
|
|
|
|
digest_size = crypto_shash_digestsize(tfm);
|
|
|
|
digest = dm_ima_alloc(digest_size, GFP_KERNEL, noio);
|
|
|
|
if (!digest)
|
|
|
|
goto error;
|
|
|
|
|
|
|
|
r = crypto_shash_init(shash);
|
|
|
|
if (r)
|
|
|
|
goto error;
|
|
|
|
|
2021-08-13 21:37:57 +00:00
|
|
|
memcpy(ima_buf + l, DM_IMA_VERSION_STR, table->md->ima.dm_version_str_len);
|
|
|
|
l += table->md->ima.dm_version_str_len;
|
|
|
|
|
dm ima: measure data on table load
DM configures a block device with various target specific attributes
passed to it as a table. DM loads the table, and calls each target’s
respective constructors with the attributes as input parameters.
Some of these attributes are critical to ensure the device meets
certain security bar. Thus, IMA should measure these attributes, to
ensure they are not tampered with, during the lifetime of the device.
So that the external services can have high confidence in the
configuration of the block-devices on a given system.
Some devices may have large tables. And a given device may change its
state (table-load, suspend, resume, rename, remove, table-clear etc.)
many times. Measuring these attributes each time when the device
changes its state will significantly increase the size of the IMA logs.
Further, once configured, these attributes are not expected to change
unless a new table is loaded, or a device is removed and recreated.
Therefore the clear-text of the attributes should only be measured
during table load, and the hash of the active/inactive table should be
measured for the remaining device state changes.
Export IMA function ima_measure_critical_data() to allow measurement
of DM device parameters, as well as target specific attributes, during
table load. Compute the hash of the inactive table and store it for
measurements during future state change. If a load is called multiple
times, update the inactive table hash with the hash of the latest
populated table. So that the correct inactive table hash is measured
when the device transitions to different states like resume, remove,
rename, etc.
Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com> # leak fix
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-07-13 00:48:58 +00:00
|
|
|
device_data_buf_len = strlen(device_data_buf);
|
|
|
|
memcpy(ima_buf + l, device_data_buf, device_data_buf_len);
|
|
|
|
l += device_data_buf_len;
|
|
|
|
|
|
|
|
for (i = 0; i < num_targets; i++) {
|
|
|
|
struct dm_target *ti = dm_table_get_target(table, i);
|
|
|
|
|
|
|
|
last_target_measured = 0;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* First retrieve the target metadata.
|
|
|
|
*/
|
|
|
|
scnprintf(target_metadata_buf, DM_IMA_TARGET_METADATA_BUF_LEN,
|
|
|
|
"target_index=%d,target_begin=%llu,target_len=%llu,",
|
|
|
|
i, ti->begin, ti->len);
|
|
|
|
target_metadata_buf_len = strlen(target_metadata_buf);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Then retrieve the actual target data.
|
|
|
|
*/
|
|
|
|
if (ti->type->status)
|
|
|
|
ti->type->status(ti, type, status_flags, target_data_buf,
|
|
|
|
DM_IMA_TARGET_DATA_BUF_LEN);
|
|
|
|
else
|
|
|
|
target_data_buf[0] = '\0';
|
|
|
|
|
|
|
|
target_data_buf_len = strlen(target_data_buf);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Check if the total data can fit into the IMA buffer.
|
|
|
|
*/
|
|
|
|
cur_total_buf_len = l + target_metadata_buf_len + target_data_buf_len;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* IMA measurements for DM targets are best-effort.
|
|
|
|
* If the total data buffered so far, including the current target,
|
|
|
|
* is too large to fit into DM_IMA_MEASUREMENT_BUF_LEN, measure what
|
|
|
|
* we have in the current buffer, and continue measuring the remaining
|
|
|
|
* targets by prefixing the device metadata again.
|
|
|
|
*/
|
|
|
|
if (unlikely(cur_total_buf_len >= DM_IMA_MEASUREMENT_BUF_LEN)) {
|
2021-08-13 21:37:58 +00:00
|
|
|
dm_ima_measure_data(table_load_event_name, ima_buf, l, noio);
|
dm ima: measure data on table load
DM configures a block device with various target specific attributes
passed to it as a table. DM loads the table, and calls each target’s
respective constructors with the attributes as input parameters.
Some of these attributes are critical to ensure the device meets
certain security bar. Thus, IMA should measure these attributes, to
ensure they are not tampered with, during the lifetime of the device.
So that the external services can have high confidence in the
configuration of the block-devices on a given system.
Some devices may have large tables. And a given device may change its
state (table-load, suspend, resume, rename, remove, table-clear etc.)
many times. Measuring these attributes each time when the device
changes its state will significantly increase the size of the IMA logs.
Further, once configured, these attributes are not expected to change
unless a new table is loaded, or a device is removed and recreated.
Therefore the clear-text of the attributes should only be measured
during table load, and the hash of the active/inactive table should be
measured for the remaining device state changes.
Export IMA function ima_measure_critical_data() to allow measurement
of DM device parameters, as well as target specific attributes, during
table load. Compute the hash of the inactive table and store it for
measurements during future state change. If a load is called multiple
times, update the inactive table hash with the hash of the latest
populated table. So that the correct inactive table hash is measured
when the device transitions to different states like resume, remove,
rename, etc.
Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com> # leak fix
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-07-13 00:48:58 +00:00
|
|
|
r = crypto_shash_update(shash, (const u8 *)ima_buf, l);
|
|
|
|
if (r < 0)
|
|
|
|
goto error;
|
|
|
|
|
|
|
|
memset(ima_buf, 0, DM_IMA_MEASUREMENT_BUF_LEN);
|
|
|
|
l = 0;
|
|
|
|
|
|
|
|
/*
|
2021-08-13 21:37:58 +00:00
|
|
|
* Each new "dm_table_load" entry in IMA log should have device data
|
|
|
|
* prefix, so that multiple records from the same "dm_table_load" for
|
dm ima: measure data on table load
DM configures a block device with various target specific attributes
passed to it as a table. DM loads the table, and calls each target’s
respective constructors with the attributes as input parameters.
Some of these attributes are critical to ensure the device meets
certain security bar. Thus, IMA should measure these attributes, to
ensure they are not tampered with, during the lifetime of the device.
So that the external services can have high confidence in the
configuration of the block-devices on a given system.
Some devices may have large tables. And a given device may change its
state (table-load, suspend, resume, rename, remove, table-clear etc.)
many times. Measuring these attributes each time when the device
changes its state will significantly increase the size of the IMA logs.
Further, once configured, these attributes are not expected to change
unless a new table is loaded, or a device is removed and recreated.
Therefore the clear-text of the attributes should only be measured
during table load, and the hash of the active/inactive table should be
measured for the remaining device state changes.
Export IMA function ima_measure_critical_data() to allow measurement
of DM device parameters, as well as target specific attributes, during
table load. Compute the hash of the inactive table and store it for
measurements during future state change. If a load is called multiple
times, update the inactive table hash with the hash of the latest
populated table. So that the correct inactive table hash is measured
when the device transitions to different states like resume, remove,
rename, etc.
Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com> # leak fix
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-07-13 00:48:58 +00:00
|
|
|
* a given device can be linked together.
|
|
|
|
*/
|
2021-08-13 21:37:57 +00:00
|
|
|
memcpy(ima_buf + l, DM_IMA_VERSION_STR, table->md->ima.dm_version_str_len);
|
|
|
|
l += table->md->ima.dm_version_str_len;
|
|
|
|
|
dm ima: measure data on table load
DM configures a block device with various target specific attributes
passed to it as a table. DM loads the table, and calls each target’s
respective constructors with the attributes as input parameters.
Some of these attributes are critical to ensure the device meets
certain security bar. Thus, IMA should measure these attributes, to
ensure they are not tampered with, during the lifetime of the device.
So that the external services can have high confidence in the
configuration of the block-devices on a given system.
Some devices may have large tables. And a given device may change its
state (table-load, suspend, resume, rename, remove, table-clear etc.)
many times. Measuring these attributes each time when the device
changes its state will significantly increase the size of the IMA logs.
Further, once configured, these attributes are not expected to change
unless a new table is loaded, or a device is removed and recreated.
Therefore the clear-text of the attributes should only be measured
during table load, and the hash of the active/inactive table should be
measured for the remaining device state changes.
Export IMA function ima_measure_critical_data() to allow measurement
of DM device parameters, as well as target specific attributes, during
table load. Compute the hash of the inactive table and store it for
measurements during future state change. If a load is called multiple
times, update the inactive table hash with the hash of the latest
populated table. So that the correct inactive table hash is measured
when the device transitions to different states like resume, remove,
rename, etc.
Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com> # leak fix
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-07-13 00:48:58 +00:00
|
|
|
memcpy(ima_buf + l, device_data_buf, device_data_buf_len);
|
|
|
|
l += device_data_buf_len;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* If this iteration of the for loop turns out to be the last target
|
2021-08-13 21:37:58 +00:00
|
|
|
* in the table, dm_ima_measure_data("dm_table_load", ...) doesn't need
|
dm ima: measure data on table load
DM configures a block device with various target specific attributes
passed to it as a table. DM loads the table, and calls each target’s
respective constructors with the attributes as input parameters.
Some of these attributes are critical to ensure the device meets
certain security bar. Thus, IMA should measure these attributes, to
ensure they are not tampered with, during the lifetime of the device.
So that the external services can have high confidence in the
configuration of the block-devices on a given system.
Some devices may have large tables. And a given device may change its
state (table-load, suspend, resume, rename, remove, table-clear etc.)
many times. Measuring these attributes each time when the device
changes its state will significantly increase the size of the IMA logs.
Further, once configured, these attributes are not expected to change
unless a new table is loaded, or a device is removed and recreated.
Therefore the clear-text of the attributes should only be measured
during table load, and the hash of the active/inactive table should be
measured for the remaining device state changes.
Export IMA function ima_measure_critical_data() to allow measurement
of DM device parameters, as well as target specific attributes, during
table load. Compute the hash of the inactive table and store it for
measurements during future state change. If a load is called multiple
times, update the inactive table hash with the hash of the latest
populated table. So that the correct inactive table hash is measured
when the device transitions to different states like resume, remove,
rename, etc.
Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com> # leak fix
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-07-13 00:48:58 +00:00
|
|
|
* to be called again, just the hash needs to be finalized.
|
|
|
|
* "last_target_measured" tracks this state.
|
|
|
|
*/
|
|
|
|
last_target_measured = 1;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Fill-in all the target metadata, so that multiple targets for the same
|
|
|
|
* device can be linked together.
|
|
|
|
*/
|
|
|
|
memcpy(ima_buf + l, target_metadata_buf, target_metadata_buf_len);
|
|
|
|
l += target_metadata_buf_len;
|
|
|
|
|
|
|
|
memcpy(ima_buf + l, target_data_buf, target_data_buf_len);
|
|
|
|
l += target_data_buf_len;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (!last_target_measured) {
|
2021-08-13 21:37:58 +00:00
|
|
|
dm_ima_measure_data(table_load_event_name, ima_buf, l, noio);
|
dm ima: measure data on table load
DM configures a block device with various target specific attributes
passed to it as a table. DM loads the table, and calls each target’s
respective constructors with the attributes as input parameters.
Some of these attributes are critical to ensure the device meets
certain security bar. Thus, IMA should measure these attributes, to
ensure they are not tampered with, during the lifetime of the device.
So that the external services can have high confidence in the
configuration of the block-devices on a given system.
Some devices may have large tables. And a given device may change its
state (table-load, suspend, resume, rename, remove, table-clear etc.)
many times. Measuring these attributes each time when the device
changes its state will significantly increase the size of the IMA logs.
Further, once configured, these attributes are not expected to change
unless a new table is loaded, or a device is removed and recreated.
Therefore the clear-text of the attributes should only be measured
during table load, and the hash of the active/inactive table should be
measured for the remaining device state changes.
Export IMA function ima_measure_critical_data() to allow measurement
of DM device parameters, as well as target specific attributes, during
table load. Compute the hash of the inactive table and store it for
measurements during future state change. If a load is called multiple
times, update the inactive table hash with the hash of the latest
populated table. So that the correct inactive table hash is measured
when the device transitions to different states like resume, remove,
rename, etc.
Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com> # leak fix
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-07-13 00:48:58 +00:00
|
|
|
|
|
|
|
r = crypto_shash_update(shash, (const u8 *)ima_buf, l);
|
|
|
|
if (r < 0)
|
|
|
|
goto error;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Finalize the table hash, and store it in table->md->ima.inactive_table.hash,
|
|
|
|
* so that the table data can be verified against the future device state change
|
|
|
|
* events, e.g. resume, rename, remove, table-clear etc.
|
|
|
|
*/
|
|
|
|
r = crypto_shash_final(shash, digest);
|
|
|
|
if (r < 0)
|
|
|
|
goto error;
|
|
|
|
|
2021-08-13 21:37:56 +00:00
|
|
|
digest_buf = dm_ima_alloc((digest_size*2) + hash_alg_prefix_len + 1, GFP_KERNEL, noio);
|
|
|
|
|
dm ima: measure data on table load
DM configures a block device with various target specific attributes
passed to it as a table. DM loads the table, and calls each target’s
respective constructors with the attributes as input parameters.
Some of these attributes are critical to ensure the device meets
certain security bar. Thus, IMA should measure these attributes, to
ensure they are not tampered with, during the lifetime of the device.
So that the external services can have high confidence in the
configuration of the block-devices on a given system.
Some devices may have large tables. And a given device may change its
state (table-load, suspend, resume, rename, remove, table-clear etc.)
many times. Measuring these attributes each time when the device
changes its state will significantly increase the size of the IMA logs.
Further, once configured, these attributes are not expected to change
unless a new table is loaded, or a device is removed and recreated.
Therefore the clear-text of the attributes should only be measured
during table load, and the hash of the active/inactive table should be
measured for the remaining device state changes.
Export IMA function ima_measure_critical_data() to allow measurement
of DM device parameters, as well as target specific attributes, during
table load. Compute the hash of the inactive table and store it for
measurements during future state change. If a load is called multiple
times, update the inactive table hash with the hash of the latest
populated table. So that the correct inactive table hash is measured
when the device transitions to different states like resume, remove,
rename, etc.
Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com> # leak fix
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-07-13 00:48:58 +00:00
|
|
|
if (!digest_buf)
|
|
|
|
goto error;
|
|
|
|
|
2021-08-13 21:37:56 +00:00
|
|
|
snprintf(digest_buf, hash_alg_prefix_len + 1, "%s:", DM_IMA_TABLE_HASH_ALG);
|
|
|
|
|
dm ima: measure data on table load
DM configures a block device with various target specific attributes
passed to it as a table. DM loads the table, and calls each target’s
respective constructors with the attributes as input parameters.
Some of these attributes are critical to ensure the device meets
certain security bar. Thus, IMA should measure these attributes, to
ensure they are not tampered with, during the lifetime of the device.
So that the external services can have high confidence in the
configuration of the block-devices on a given system.
Some devices may have large tables. And a given device may change its
state (table-load, suspend, resume, rename, remove, table-clear etc.)
many times. Measuring these attributes each time when the device
changes its state will significantly increase the size of the IMA logs.
Further, once configured, these attributes are not expected to change
unless a new table is loaded, or a device is removed and recreated.
Therefore the clear-text of the attributes should only be measured
during table load, and the hash of the active/inactive table should be
measured for the remaining device state changes.
Export IMA function ima_measure_critical_data() to allow measurement
of DM device parameters, as well as target specific attributes, during
table load. Compute the hash of the inactive table and store it for
measurements during future state change. If a load is called multiple
times, update the inactive table hash with the hash of the latest
populated table. So that the correct inactive table hash is measured
when the device transitions to different states like resume, remove,
rename, etc.
Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com> # leak fix
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-07-13 00:48:58 +00:00
|
|
|
for (i = 0; i < digest_size; i++)
|
2021-08-13 21:37:56 +00:00
|
|
|
snprintf((digest_buf + hash_alg_prefix_len + (i*2)), 3, "%02x", digest[i]);
|
dm ima: measure data on table load
DM configures a block device with various target specific attributes
passed to it as a table. DM loads the table, and calls each target’s
respective constructors with the attributes as input parameters.
Some of these attributes are critical to ensure the device meets
certain security bar. Thus, IMA should measure these attributes, to
ensure they are not tampered with, during the lifetime of the device.
So that the external services can have high confidence in the
configuration of the block-devices on a given system.
Some devices may have large tables. And a given device may change its
state (table-load, suspend, resume, rename, remove, table-clear etc.)
many times. Measuring these attributes each time when the device
changes its state will significantly increase the size of the IMA logs.
Further, once configured, these attributes are not expected to change
unless a new table is loaded, or a device is removed and recreated.
Therefore the clear-text of the attributes should only be measured
during table load, and the hash of the active/inactive table should be
measured for the remaining device state changes.
Export IMA function ima_measure_critical_data() to allow measurement
of DM device parameters, as well as target specific attributes, during
table load. Compute the hash of the inactive table and store it for
measurements during future state change. If a load is called multiple
times, update the inactive table hash with the hash of the latest
populated table. So that the correct inactive table hash is measured
when the device transitions to different states like resume, remove,
rename, etc.
Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com> # leak fix
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-07-13 00:48:58 +00:00
|
|
|
|
|
|
|
if (table->md->ima.active_table.hash != table->md->ima.inactive_table.hash)
|
|
|
|
kfree(table->md->ima.inactive_table.hash);
|
|
|
|
|
|
|
|
table->md->ima.inactive_table.hash = digest_buf;
|
|
|
|
table->md->ima.inactive_table.hash_len = strlen(digest_buf);
|
|
|
|
table->md->ima.inactive_table.num_targets = num_targets;
|
|
|
|
|
|
|
|
if (table->md->ima.active_table.device_metadata !=
|
|
|
|
table->md->ima.inactive_table.device_metadata)
|
|
|
|
kfree(table->md->ima.inactive_table.device_metadata);
|
|
|
|
|
|
|
|
table->md->ima.inactive_table.device_metadata = device_data_buf;
|
|
|
|
table->md->ima.inactive_table.device_metadata_len = device_data_buf_len;
|
|
|
|
|
|
|
|
goto exit;
|
|
|
|
error:
|
|
|
|
kfree(digest_buf);
|
|
|
|
kfree(device_data_buf);
|
|
|
|
exit:
|
|
|
|
kfree(digest);
|
|
|
|
if (tfm)
|
|
|
|
crypto_free_shash(tfm);
|
|
|
|
kfree(ima_buf);
|
|
|
|
kfree(target_metadata_buf);
|
|
|
|
kfree(target_data_buf);
|
|
|
|
}
|
dm ima: measure data on device resume
A given block device can load a table multiple times, with different
input parameters, before eventually resuming it. Further, a device may
be suspended and then resumed. The device may never resume after a
table-load. Because of the above valid scenarios for a given device,
it is important to measure and log the device resume event using IMA.
Also, if the table is large, measuring it in clear-text each time the
device changes state, will unnecessarily increase the size of IMA log.
Since the table clear-text is already measured during table-load event,
measuring the hash during resume should be sufficient to validate the
table contents.
Measure the device parameters, and hash of the active table, when the
device is resumed.
Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-07-13 00:48:59 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Measure IMA data on device resume.
|
|
|
|
*/
|
|
|
|
void dm_ima_measure_on_device_resume(struct mapped_device *md, bool swap)
|
|
|
|
{
|
|
|
|
char *device_table_data, *dev_name = NULL, *dev_uuid = NULL, *capacity_str = NULL;
|
|
|
|
char active[] = "active_table_hash=";
|
|
|
|
unsigned int active_len = strlen(active), capacity_len = 0;
|
|
|
|
unsigned int l = 0;
|
|
|
|
bool noio = true;
|
2021-08-13 21:37:57 +00:00
|
|
|
bool nodata = true;
|
dm ima: measure data on device resume
A given block device can load a table multiple times, with different
input parameters, before eventually resuming it. Further, a device may
be suspended and then resumed. The device may never resume after a
table-load. Because of the above valid scenarios for a given device,
it is important to measure and log the device resume event using IMA.
Also, if the table is large, measuring it in clear-text each time the
device changes state, will unnecessarily increase the size of IMA log.
Since the table clear-text is already measured during table-load event,
measuring the hash during resume should be sufficient to validate the
table contents.
Measure the device parameters, and hash of the active table, when the
device is resumed.
Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-07-13 00:48:59 +00:00
|
|
|
int r;
|
|
|
|
|
|
|
|
device_table_data = dm_ima_alloc(DM_IMA_DEVICE_BUF_LEN, GFP_KERNEL, noio);
|
|
|
|
if (!device_table_data)
|
|
|
|
return;
|
|
|
|
|
|
|
|
r = dm_ima_alloc_and_copy_capacity_str(md, &capacity_str, noio);
|
|
|
|
if (r)
|
|
|
|
goto error;
|
|
|
|
|
2021-08-13 21:37:57 +00:00
|
|
|
memcpy(device_table_data + l, DM_IMA_VERSION_STR, md->ima.dm_version_str_len);
|
|
|
|
l += md->ima.dm_version_str_len;
|
|
|
|
|
dm ima: measure data on device resume
A given block device can load a table multiple times, with different
input parameters, before eventually resuming it. Further, a device may
be suspended and then resumed. The device may never resume after a
table-load. Because of the above valid scenarios for a given device,
it is important to measure and log the device resume event using IMA.
Also, if the table is large, measuring it in clear-text each time the
device changes state, will unnecessarily increase the size of IMA log.
Since the table clear-text is already measured during table-load event,
measuring the hash during resume should be sufficient to validate the
table contents.
Measure the device parameters, and hash of the active table, when the
device is resumed.
Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-07-13 00:48:59 +00:00
|
|
|
if (swap) {
|
|
|
|
if (md->ima.active_table.hash != md->ima.inactive_table.hash)
|
|
|
|
kfree(md->ima.active_table.hash);
|
|
|
|
|
|
|
|
md->ima.active_table.hash = NULL;
|
|
|
|
md->ima.active_table.hash_len = 0;
|
|
|
|
|
|
|
|
if (md->ima.active_table.device_metadata !=
|
|
|
|
md->ima.inactive_table.device_metadata)
|
|
|
|
kfree(md->ima.active_table.device_metadata);
|
|
|
|
|
|
|
|
md->ima.active_table.device_metadata = NULL;
|
|
|
|
md->ima.active_table.device_metadata_len = 0;
|
|
|
|
md->ima.active_table.num_targets = 0;
|
|
|
|
|
|
|
|
if (md->ima.inactive_table.hash) {
|
|
|
|
md->ima.active_table.hash = md->ima.inactive_table.hash;
|
|
|
|
md->ima.active_table.hash_len = md->ima.inactive_table.hash_len;
|
|
|
|
md->ima.inactive_table.hash = NULL;
|
|
|
|
md->ima.inactive_table.hash_len = 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (md->ima.inactive_table.device_metadata) {
|
|
|
|
md->ima.active_table.device_metadata =
|
|
|
|
md->ima.inactive_table.device_metadata;
|
|
|
|
md->ima.active_table.device_metadata_len =
|
|
|
|
md->ima.inactive_table.device_metadata_len;
|
|
|
|
md->ima.active_table.num_targets = md->ima.inactive_table.num_targets;
|
|
|
|
md->ima.inactive_table.device_metadata = NULL;
|
|
|
|
md->ima.inactive_table.device_metadata_len = 0;
|
|
|
|
md->ima.inactive_table.num_targets = 0;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
if (md->ima.active_table.device_metadata) {
|
2021-08-13 21:37:57 +00:00
|
|
|
memcpy(device_table_data + l, md->ima.active_table.device_metadata,
|
|
|
|
md->ima.active_table.device_metadata_len);
|
|
|
|
l += md->ima.active_table.device_metadata_len;
|
|
|
|
|
|
|
|
nodata = false;
|
dm ima: measure data on device resume
A given block device can load a table multiple times, with different
input parameters, before eventually resuming it. Further, a device may
be suspended and then resumed. The device may never resume after a
table-load. Because of the above valid scenarios for a given device,
it is important to measure and log the device resume event using IMA.
Also, if the table is large, measuring it in clear-text each time the
device changes state, will unnecessarily increase the size of IMA log.
Since the table clear-text is already measured during table-load event,
measuring the hash during resume should be sufficient to validate the
table contents.
Measure the device parameters, and hash of the active table, when the
device is resumed.
Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-07-13 00:48:59 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
if (md->ima.active_table.hash) {
|
|
|
|
memcpy(device_table_data + l, active, active_len);
|
|
|
|
l += active_len;
|
|
|
|
|
|
|
|
memcpy(device_table_data + l, md->ima.active_table.hash,
|
|
|
|
md->ima.active_table.hash_len);
|
|
|
|
l += md->ima.active_table.hash_len;
|
|
|
|
|
|
|
|
memcpy(device_table_data + l, ";", 1);
|
|
|
|
l++;
|
2021-08-13 21:37:57 +00:00
|
|
|
|
|
|
|
nodata = false;
|
dm ima: measure data on device resume
A given block device can load a table multiple times, with different
input parameters, before eventually resuming it. Further, a device may
be suspended and then resumed. The device may never resume after a
table-load. Because of the above valid scenarios for a given device,
it is important to measure and log the device resume event using IMA.
Also, if the table is large, measuring it in clear-text each time the
device changes state, will unnecessarily increase the size of IMA log.
Since the table clear-text is already measured during table-load event,
measuring the hash during resume should be sufficient to validate the
table contents.
Measure the device parameters, and hash of the active table, when the
device is resumed.
Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-07-13 00:48:59 +00:00
|
|
|
}
|
|
|
|
|
2021-08-13 21:37:57 +00:00
|
|
|
if (nodata) {
|
dm ima: measure data on device resume
A given block device can load a table multiple times, with different
input parameters, before eventually resuming it. Further, a device may
be suspended and then resumed. The device may never resume after a
table-load. Because of the above valid scenarios for a given device,
it is important to measure and log the device resume event using IMA.
Also, if the table is large, measuring it in clear-text each time the
device changes state, will unnecessarily increase the size of IMA log.
Since the table clear-text is already measured during table-load event,
measuring the hash during resume should be sufficient to validate the
table contents.
Measure the device parameters, and hash of the active table, when the
device is resumed.
Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-07-13 00:48:59 +00:00
|
|
|
r = dm_ima_alloc_and_copy_name_uuid(md, &dev_name, &dev_uuid, noio);
|
|
|
|
if (r)
|
|
|
|
goto error;
|
|
|
|
|
|
|
|
scnprintf(device_table_data, DM_IMA_DEVICE_BUF_LEN,
|
2021-08-13 21:37:57 +00:00
|
|
|
"%sname=%s,uuid=%s;device_resume=no_data;",
|
|
|
|
DM_IMA_VERSION_STR, dev_name, dev_uuid);
|
2022-01-25 14:05:47 +00:00
|
|
|
l = strlen(device_table_data);
|
dm ima: measure data on device resume
A given block device can load a table multiple times, with different
input parameters, before eventually resuming it. Further, a device may
be suspended and then resumed. The device may never resume after a
table-load. Because of the above valid scenarios for a given device,
it is important to measure and log the device resume event using IMA.
Also, if the table is large, measuring it in clear-text each time the
device changes state, will unnecessarily increase the size of IMA log.
Since the table clear-text is already measured during table-load event,
measuring the hash during resume should be sufficient to validate the
table contents.
Measure the device parameters, and hash of the active table, when the
device is resumed.
Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-07-13 00:48:59 +00:00
|
|
|
|
|
|
|
}
|
|
|
|
|
|
|
|
capacity_len = strlen(capacity_str);
|
|
|
|
memcpy(device_table_data + l, capacity_str, capacity_len);
|
|
|
|
l += capacity_len;
|
|
|
|
|
2021-08-13 21:37:58 +00:00
|
|
|
dm_ima_measure_data("dm_device_resume", device_table_data, l, noio);
|
dm ima: measure data on device resume
A given block device can load a table multiple times, with different
input parameters, before eventually resuming it. Further, a device may
be suspended and then resumed. The device may never resume after a
table-load. Because of the above valid scenarios for a given device,
it is important to measure and log the device resume event using IMA.
Also, if the table is large, measuring it in clear-text each time the
device changes state, will unnecessarily increase the size of IMA log.
Since the table clear-text is already measured during table-load event,
measuring the hash during resume should be sufficient to validate the
table contents.
Measure the device parameters, and hash of the active table, when the
device is resumed.
Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-07-13 00:48:59 +00:00
|
|
|
|
|
|
|
kfree(dev_name);
|
|
|
|
kfree(dev_uuid);
|
|
|
|
error:
|
|
|
|
kfree(capacity_str);
|
|
|
|
kfree(device_table_data);
|
|
|
|
}
|
2021-07-13 00:49:00 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Measure IMA data on remove.
|
|
|
|
*/
|
|
|
|
void dm_ima_measure_on_device_remove(struct mapped_device *md, bool remove_all)
|
|
|
|
{
|
|
|
|
char *device_table_data, *dev_name = NULL, *dev_uuid = NULL, *capacity_str = NULL;
|
|
|
|
char active_table_str[] = "active_table_hash=";
|
|
|
|
char inactive_table_str[] = "inactive_table_hash=";
|
|
|
|
char device_active_str[] = "device_active_metadata=";
|
|
|
|
char device_inactive_str[] = "device_inactive_metadata=";
|
|
|
|
char remove_all_str[] = "remove_all=";
|
|
|
|
unsigned int active_table_len = strlen(active_table_str);
|
|
|
|
unsigned int inactive_table_len = strlen(inactive_table_str);
|
|
|
|
unsigned int device_active_len = strlen(device_active_str);
|
|
|
|
unsigned int device_inactive_len = strlen(device_inactive_str);
|
|
|
|
unsigned int remove_all_len = strlen(remove_all_str);
|
|
|
|
unsigned int capacity_len = 0;
|
|
|
|
unsigned int l = 0;
|
|
|
|
bool noio = true;
|
2021-08-13 21:37:57 +00:00
|
|
|
bool nodata = true;
|
2021-07-13 00:49:00 +00:00
|
|
|
int r;
|
|
|
|
|
|
|
|
device_table_data = dm_ima_alloc(DM_IMA_DEVICE_BUF_LEN*2, GFP_KERNEL, noio);
|
|
|
|
if (!device_table_data)
|
|
|
|
goto exit;
|
|
|
|
|
|
|
|
r = dm_ima_alloc_and_copy_capacity_str(md, &capacity_str, noio);
|
|
|
|
if (r) {
|
|
|
|
kfree(device_table_data);
|
|
|
|
goto exit;
|
|
|
|
}
|
|
|
|
|
2021-08-13 21:37:57 +00:00
|
|
|
memcpy(device_table_data + l, DM_IMA_VERSION_STR, md->ima.dm_version_str_len);
|
|
|
|
l += md->ima.dm_version_str_len;
|
|
|
|
|
2021-07-13 00:49:00 +00:00
|
|
|
if (md->ima.active_table.device_metadata) {
|
|
|
|
memcpy(device_table_data + l, device_active_str, device_active_len);
|
|
|
|
l += device_active_len;
|
|
|
|
|
|
|
|
memcpy(device_table_data + l, md->ima.active_table.device_metadata,
|
|
|
|
md->ima.active_table.device_metadata_len);
|
|
|
|
l += md->ima.active_table.device_metadata_len;
|
2021-08-13 21:37:57 +00:00
|
|
|
|
|
|
|
nodata = false;
|
2021-07-13 00:49:00 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
if (md->ima.inactive_table.device_metadata) {
|
|
|
|
memcpy(device_table_data + l, device_inactive_str, device_inactive_len);
|
|
|
|
l += device_inactive_len;
|
|
|
|
|
|
|
|
memcpy(device_table_data + l, md->ima.inactive_table.device_metadata,
|
|
|
|
md->ima.inactive_table.device_metadata_len);
|
|
|
|
l += md->ima.inactive_table.device_metadata_len;
|
2021-08-13 21:37:57 +00:00
|
|
|
|
|
|
|
nodata = false;
|
2021-07-13 00:49:00 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
if (md->ima.active_table.hash) {
|
|
|
|
memcpy(device_table_data + l, active_table_str, active_table_len);
|
|
|
|
l += active_table_len;
|
|
|
|
|
|
|
|
memcpy(device_table_data + l, md->ima.active_table.hash,
|
|
|
|
md->ima.active_table.hash_len);
|
|
|
|
l += md->ima.active_table.hash_len;
|
|
|
|
|
|
|
|
memcpy(device_table_data + l, ",", 1);
|
|
|
|
l++;
|
2021-08-13 21:37:57 +00:00
|
|
|
|
|
|
|
nodata = false;
|
2021-07-13 00:49:00 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
if (md->ima.inactive_table.hash) {
|
|
|
|
memcpy(device_table_data + l, inactive_table_str, inactive_table_len);
|
|
|
|
l += inactive_table_len;
|
|
|
|
|
|
|
|
memcpy(device_table_data + l, md->ima.inactive_table.hash,
|
|
|
|
md->ima.inactive_table.hash_len);
|
|
|
|
l += md->ima.inactive_table.hash_len;
|
|
|
|
|
|
|
|
memcpy(device_table_data + l, ",", 1);
|
|
|
|
l++;
|
2021-08-13 21:37:57 +00:00
|
|
|
|
|
|
|
nodata = false;
|
2021-07-13 00:49:00 +00:00
|
|
|
}
|
|
|
|
/*
|
|
|
|
* In case both active and inactive tables, and corresponding
|
|
|
|
* device metadata is cleared/missing - record the name and uuid
|
|
|
|
* in IMA measurements.
|
|
|
|
*/
|
2021-08-13 21:37:57 +00:00
|
|
|
if (nodata) {
|
2021-07-13 00:49:00 +00:00
|
|
|
if (dm_ima_alloc_and_copy_name_uuid(md, &dev_name, &dev_uuid, noio))
|
|
|
|
goto error;
|
|
|
|
|
|
|
|
scnprintf(device_table_data, DM_IMA_DEVICE_BUF_LEN,
|
2021-08-13 21:37:57 +00:00
|
|
|
"%sname=%s,uuid=%s;device_remove=no_data;",
|
|
|
|
DM_IMA_VERSION_STR, dev_name, dev_uuid);
|
2022-01-25 14:05:47 +00:00
|
|
|
l = strlen(device_table_data);
|
2021-07-13 00:49:00 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
memcpy(device_table_data + l, remove_all_str, remove_all_len);
|
|
|
|
l += remove_all_len;
|
|
|
|
memcpy(device_table_data + l, remove_all ? "y;" : "n;", 2);
|
|
|
|
l += 2;
|
|
|
|
|
|
|
|
capacity_len = strlen(capacity_str);
|
|
|
|
memcpy(device_table_data + l, capacity_str, capacity_len);
|
|
|
|
l += capacity_len;
|
|
|
|
|
2021-08-13 21:37:58 +00:00
|
|
|
dm_ima_measure_data("dm_device_remove", device_table_data, l, noio);
|
2021-07-13 00:49:00 +00:00
|
|
|
|
|
|
|
error:
|
|
|
|
kfree(device_table_data);
|
|
|
|
kfree(capacity_str);
|
|
|
|
exit:
|
|
|
|
kfree(md->ima.active_table.device_metadata);
|
|
|
|
|
|
|
|
if (md->ima.active_table.device_metadata !=
|
|
|
|
md->ima.inactive_table.device_metadata)
|
|
|
|
kfree(md->ima.inactive_table.device_metadata);
|
|
|
|
|
|
|
|
kfree(md->ima.active_table.hash);
|
|
|
|
|
|
|
|
if (md->ima.active_table.hash != md->ima.inactive_table.hash)
|
|
|
|
kfree(md->ima.inactive_table.hash);
|
|
|
|
|
|
|
|
dm_ima_reset_data(md);
|
|
|
|
|
|
|
|
kfree(dev_name);
|
|
|
|
kfree(dev_uuid);
|
|
|
|
}
|
2021-07-13 00:49:01 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Measure ima data on table clear.
|
|
|
|
*/
|
|
|
|
void dm_ima_measure_on_table_clear(struct mapped_device *md, bool new_map)
|
|
|
|
{
|
|
|
|
unsigned int l = 0, capacity_len = 0;
|
|
|
|
char *device_table_data = NULL, *dev_name = NULL, *dev_uuid = NULL, *capacity_str = NULL;
|
|
|
|
char inactive_str[] = "inactive_table_hash=";
|
|
|
|
unsigned int inactive_len = strlen(inactive_str);
|
|
|
|
bool noio = true;
|
2021-08-13 21:37:57 +00:00
|
|
|
bool nodata = true;
|
2021-07-13 00:49:01 +00:00
|
|
|
int r;
|
|
|
|
|
|
|
|
device_table_data = dm_ima_alloc(DM_IMA_DEVICE_BUF_LEN, GFP_KERNEL, noio);
|
|
|
|
if (!device_table_data)
|
|
|
|
return;
|
|
|
|
|
|
|
|
r = dm_ima_alloc_and_copy_capacity_str(md, &capacity_str, noio);
|
|
|
|
if (r)
|
|
|
|
goto error1;
|
|
|
|
|
2021-08-13 21:37:57 +00:00
|
|
|
memcpy(device_table_data + l, DM_IMA_VERSION_STR, md->ima.dm_version_str_len);
|
|
|
|
l += md->ima.dm_version_str_len;
|
|
|
|
|
2021-07-13 00:49:01 +00:00
|
|
|
if (md->ima.inactive_table.device_metadata_len &&
|
|
|
|
md->ima.inactive_table.hash_len) {
|
|
|
|
memcpy(device_table_data + l, md->ima.inactive_table.device_metadata,
|
|
|
|
md->ima.inactive_table.device_metadata_len);
|
|
|
|
l += md->ima.inactive_table.device_metadata_len;
|
|
|
|
|
|
|
|
memcpy(device_table_data + l, inactive_str, inactive_len);
|
|
|
|
l += inactive_len;
|
|
|
|
|
|
|
|
memcpy(device_table_data + l, md->ima.inactive_table.hash,
|
|
|
|
md->ima.inactive_table.hash_len);
|
|
|
|
|
|
|
|
l += md->ima.inactive_table.hash_len;
|
|
|
|
|
|
|
|
memcpy(device_table_data + l, ";", 1);
|
|
|
|
l++;
|
2021-08-13 21:37:57 +00:00
|
|
|
|
|
|
|
nodata = false;
|
2021-07-13 00:49:01 +00:00
|
|
|
}
|
|
|
|
|
2021-08-13 21:37:57 +00:00
|
|
|
if (nodata) {
|
2021-07-13 00:49:01 +00:00
|
|
|
if (dm_ima_alloc_and_copy_name_uuid(md, &dev_name, &dev_uuid, noio))
|
|
|
|
goto error2;
|
|
|
|
|
|
|
|
scnprintf(device_table_data, DM_IMA_DEVICE_BUF_LEN,
|
2021-08-13 21:37:57 +00:00
|
|
|
"%sname=%s,uuid=%s;table_clear=no_data;",
|
|
|
|
DM_IMA_VERSION_STR, dev_name, dev_uuid);
|
2022-01-25 14:05:47 +00:00
|
|
|
l = strlen(device_table_data);
|
2021-07-13 00:49:01 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
capacity_len = strlen(capacity_str);
|
|
|
|
memcpy(device_table_data + l, capacity_str, capacity_len);
|
|
|
|
l += capacity_len;
|
|
|
|
|
2021-08-13 21:37:58 +00:00
|
|
|
dm_ima_measure_data("dm_table_clear", device_table_data, l, noio);
|
2021-07-13 00:49:01 +00:00
|
|
|
|
|
|
|
if (new_map) {
|
|
|
|
if (md->ima.inactive_table.hash &&
|
|
|
|
md->ima.inactive_table.hash != md->ima.active_table.hash)
|
|
|
|
kfree(md->ima.inactive_table.hash);
|
|
|
|
|
|
|
|
md->ima.inactive_table.hash = NULL;
|
|
|
|
md->ima.inactive_table.hash_len = 0;
|
|
|
|
|
|
|
|
if (md->ima.inactive_table.device_metadata &&
|
|
|
|
md->ima.inactive_table.device_metadata != md->ima.active_table.device_metadata)
|
|
|
|
kfree(md->ima.inactive_table.device_metadata);
|
|
|
|
|
|
|
|
md->ima.inactive_table.device_metadata = NULL;
|
|
|
|
md->ima.inactive_table.device_metadata_len = 0;
|
|
|
|
md->ima.inactive_table.num_targets = 0;
|
|
|
|
|
|
|
|
if (md->ima.active_table.hash) {
|
|
|
|
md->ima.inactive_table.hash = md->ima.active_table.hash;
|
|
|
|
md->ima.inactive_table.hash_len = md->ima.active_table.hash_len;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (md->ima.active_table.device_metadata) {
|
|
|
|
md->ima.inactive_table.device_metadata =
|
|
|
|
md->ima.active_table.device_metadata;
|
|
|
|
md->ima.inactive_table.device_metadata_len =
|
|
|
|
md->ima.active_table.device_metadata_len;
|
|
|
|
md->ima.inactive_table.num_targets =
|
|
|
|
md->ima.active_table.num_targets;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
kfree(dev_name);
|
|
|
|
kfree(dev_uuid);
|
|
|
|
error2:
|
|
|
|
kfree(capacity_str);
|
|
|
|
error1:
|
|
|
|
kfree(device_table_data);
|
|
|
|
}
|
2021-07-13 00:49:02 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Measure IMA data on device rename.
|
|
|
|
*/
|
|
|
|
void dm_ima_measure_on_device_rename(struct mapped_device *md)
|
|
|
|
{
|
|
|
|
char *old_device_data = NULL, *new_device_data = NULL, *combined_device_data = NULL;
|
|
|
|
char *new_dev_name = NULL, *new_dev_uuid = NULL, *capacity_str = NULL;
|
|
|
|
bool noio = true;
|
|
|
|
int r;
|
|
|
|
|
|
|
|
if (dm_ima_alloc_and_copy_device_data(md, &new_device_data,
|
|
|
|
md->ima.active_table.num_targets, noio))
|
|
|
|
return;
|
|
|
|
|
|
|
|
if (dm_ima_alloc_and_copy_name_uuid(md, &new_dev_name, &new_dev_uuid, noio))
|
|
|
|
goto error;
|
|
|
|
|
|
|
|
combined_device_data = dm_ima_alloc(DM_IMA_DEVICE_BUF_LEN * 2, GFP_KERNEL, noio);
|
|
|
|
if (!combined_device_data)
|
|
|
|
goto error;
|
|
|
|
|
|
|
|
r = dm_ima_alloc_and_copy_capacity_str(md, &capacity_str, noio);
|
|
|
|
if (r)
|
|
|
|
goto error;
|
|
|
|
|
|
|
|
old_device_data = md->ima.active_table.device_metadata;
|
|
|
|
|
|
|
|
md->ima.active_table.device_metadata = new_device_data;
|
|
|
|
md->ima.active_table.device_metadata_len = strlen(new_device_data);
|
|
|
|
|
2021-08-13 21:37:57 +00:00
|
|
|
scnprintf(combined_device_data, DM_IMA_DEVICE_BUF_LEN * 2,
|
|
|
|
"%s%snew_name=%s,new_uuid=%s;%s", DM_IMA_VERSION_STR, old_device_data,
|
|
|
|
new_dev_name, new_dev_uuid, capacity_str);
|
2021-07-13 00:49:02 +00:00
|
|
|
|
2021-08-13 21:37:58 +00:00
|
|
|
dm_ima_measure_data("dm_device_rename", combined_device_data, strlen(combined_device_data),
|
2021-07-13 00:49:02 +00:00
|
|
|
noio);
|
|
|
|
|
|
|
|
goto exit;
|
|
|
|
|
|
|
|
error:
|
|
|
|
kfree(new_device_data);
|
|
|
|
exit:
|
|
|
|
kfree(capacity_str);
|
|
|
|
kfree(combined_device_data);
|
|
|
|
kfree(old_device_data);
|
|
|
|
kfree(new_dev_name);
|
|
|
|
kfree(new_dev_uuid);
|
|
|
|
}
|