linux/block/blk-ia-ranges.c

319 lines
8.5 KiB
C
Raw Permalink Normal View History

block: Add independent access ranges support The Concurrent Positioning Ranges VPD page (for SCSI) and data log page (for ATA) contain parameters describing the set of contiguous LBAs that can be served independently by a single LUN multi-actuator hard-disk. Similarly, a logically defined block device composed of multiple disks can in some cases execute requests directed at different sector ranges in parallel. A dm-linear device aggregating 2 block devices together is an example. This patch implements support for exposing a block device independent access ranges to the user through sysfs to allow optimizing device accesses to increase performance. To describe the set of independent sector ranges of a device (actuators of a multi-actuator HDDs or table entries of a dm-linear device), The type struct blk_independent_access_ranges is introduced. This structure describes the sector ranges using an array of struct blk_independent_access_range structures. This range structure defines the start sector and number of sectors of the access range. The ranges in the array cannot overlap and must contain all sectors within the device capacity. The function disk_set_independent_access_ranges() allows a device driver to signal to the block layer that a device has multiple independent access ranges. In this case, a struct blk_independent_access_ranges is attached to the device request queue by the function disk_set_independent_access_ranges(). The function disk_alloc_independent_access_ranges() is provided for drivers to allocate this structure. struct blk_independent_access_ranges contains kobjects (struct kobject) to expose to the user through sysfs the set of independent access ranges supported by a device. When the device is initialized, sysfs registration of the ranges information is done from blk_register_queue() using the block layer internal function disk_register_independent_access_ranges(). If a driver calls disk_set_independent_access_ranges() for a registered queue, e.g. when a device is revalidated, disk_set_independent_access_ranges() will execute disk_register_independent_access_ranges() to update the sysfs attribute files. The sysfs file structure created starts from the independent_access_ranges sub-directory and contains the start sector and number of sectors of each range, with the information for each range grouped in numbered sub-directories. E.g. for a dual actuator HDD, the user sees: $ tree /sys/block/sdk/queue/independent_access_ranges/ /sys/block/sdk/queue/independent_access_ranges/ |-- 0 | |-- nr_sectors | `-- sector `-- 1 |-- nr_sectors `-- sector For a regular device with a single access range, the independent_access_ranges sysfs directory does not exist. Device revalidation may lead to changes to this structure and to the attribute values. When manipulated, the queue sysfs_lock and sysfs_dir_lock mutexes are held for atomicity, similarly to how the blk-mq and elevator sysfs queue sub-directories are protected. The code related to the management of independent access ranges is added in the new file block/blk-ia-ranges.c. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Link: https://lore.kernel.org/r/20211027022223.183838-2-damien.lemoal@wdc.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-27 02:22:19 +00:00
// SPDX-License-Identifier: GPL-2.0
/*
* Block device concurrent positioning ranges.
*
* Copyright (C) 2021 Western Digital Corporation or its Affiliates.
*/
#include <linux/kernel.h>
#include <linux/blkdev.h>
#include <linux/slab.h>
#include <linux/init.h>
#include "blk.h"
static ssize_t
blk_ia_range_sector_show(struct blk_independent_access_range *iar,
char *buf)
{
return sprintf(buf, "%llu\n", iar->sector);
}
static ssize_t
blk_ia_range_nr_sectors_show(struct blk_independent_access_range *iar,
char *buf)
{
return sprintf(buf, "%llu\n", iar->nr_sectors);
}
struct blk_ia_range_sysfs_entry {
struct attribute attr;
ssize_t (*show)(struct blk_independent_access_range *iar, char *buf);
};
static struct blk_ia_range_sysfs_entry blk_ia_range_sector_entry = {
.attr = { .name = "sector", .mode = 0444 },
.show = blk_ia_range_sector_show,
};
static struct blk_ia_range_sysfs_entry blk_ia_range_nr_sectors_entry = {
.attr = { .name = "nr_sectors", .mode = 0444 },
.show = blk_ia_range_nr_sectors_show,
};
static struct attribute *blk_ia_range_attrs[] = {
&blk_ia_range_sector_entry.attr,
&blk_ia_range_nr_sectors_entry.attr,
NULL,
};
ATTRIBUTE_GROUPS(blk_ia_range);
static ssize_t blk_ia_range_sysfs_show(struct kobject *kobj,
struct attribute *attr, char *buf)
{
struct blk_ia_range_sysfs_entry *entry =
container_of(attr, struct blk_ia_range_sysfs_entry, attr);
struct blk_independent_access_range *iar =
container_of(kobj, struct blk_independent_access_range, kobj);
return entry->show(iar, buf);
block: Add independent access ranges support The Concurrent Positioning Ranges VPD page (for SCSI) and data log page (for ATA) contain parameters describing the set of contiguous LBAs that can be served independently by a single LUN multi-actuator hard-disk. Similarly, a logically defined block device composed of multiple disks can in some cases execute requests directed at different sector ranges in parallel. A dm-linear device aggregating 2 block devices together is an example. This patch implements support for exposing a block device independent access ranges to the user through sysfs to allow optimizing device accesses to increase performance. To describe the set of independent sector ranges of a device (actuators of a multi-actuator HDDs or table entries of a dm-linear device), The type struct blk_independent_access_ranges is introduced. This structure describes the sector ranges using an array of struct blk_independent_access_range structures. This range structure defines the start sector and number of sectors of the access range. The ranges in the array cannot overlap and must contain all sectors within the device capacity. The function disk_set_independent_access_ranges() allows a device driver to signal to the block layer that a device has multiple independent access ranges. In this case, a struct blk_independent_access_ranges is attached to the device request queue by the function disk_set_independent_access_ranges(). The function disk_alloc_independent_access_ranges() is provided for drivers to allocate this structure. struct blk_independent_access_ranges contains kobjects (struct kobject) to expose to the user through sysfs the set of independent access ranges supported by a device. When the device is initialized, sysfs registration of the ranges information is done from blk_register_queue() using the block layer internal function disk_register_independent_access_ranges(). If a driver calls disk_set_independent_access_ranges() for a registered queue, e.g. when a device is revalidated, disk_set_independent_access_ranges() will execute disk_register_independent_access_ranges() to update the sysfs attribute files. The sysfs file structure created starts from the independent_access_ranges sub-directory and contains the start sector and number of sectors of each range, with the information for each range grouped in numbered sub-directories. E.g. for a dual actuator HDD, the user sees: $ tree /sys/block/sdk/queue/independent_access_ranges/ /sys/block/sdk/queue/independent_access_ranges/ |-- 0 | |-- nr_sectors | `-- sector `-- 1 |-- nr_sectors `-- sector For a regular device with a single access range, the independent_access_ranges sysfs directory does not exist. Device revalidation may lead to changes to this structure and to the attribute values. When manipulated, the queue sysfs_lock and sysfs_dir_lock mutexes are held for atomicity, similarly to how the blk-mq and elevator sysfs queue sub-directories are protected. The code related to the management of independent access ranges is added in the new file block/blk-ia-ranges.c. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Link: https://lore.kernel.org/r/20211027022223.183838-2-damien.lemoal@wdc.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-27 02:22:19 +00:00
}
static const struct sysfs_ops blk_ia_range_sysfs_ops = {
.show = blk_ia_range_sysfs_show,
};
/*
* Independent access range entries are not freed individually, but alltogether
* with struct blk_independent_access_ranges and its array of ranges. Since
* kobject_add() takes a reference on the parent kobject contained in
* struct blk_independent_access_ranges, the array of independent access range
* entries cannot be freed until kobject_del() is called for all entries.
* So we do not need to do anything here, but still need this no-op release
* operation to avoid complaints from the kobject code.
*/
static void blk_ia_range_sysfs_nop_release(struct kobject *kobj)
{
}
static const struct kobj_type blk_ia_range_ktype = {
block: Add independent access ranges support The Concurrent Positioning Ranges VPD page (for SCSI) and data log page (for ATA) contain parameters describing the set of contiguous LBAs that can be served independently by a single LUN multi-actuator hard-disk. Similarly, a logically defined block device composed of multiple disks can in some cases execute requests directed at different sector ranges in parallel. A dm-linear device aggregating 2 block devices together is an example. This patch implements support for exposing a block device independent access ranges to the user through sysfs to allow optimizing device accesses to increase performance. To describe the set of independent sector ranges of a device (actuators of a multi-actuator HDDs or table entries of a dm-linear device), The type struct blk_independent_access_ranges is introduced. This structure describes the sector ranges using an array of struct blk_independent_access_range structures. This range structure defines the start sector and number of sectors of the access range. The ranges in the array cannot overlap and must contain all sectors within the device capacity. The function disk_set_independent_access_ranges() allows a device driver to signal to the block layer that a device has multiple independent access ranges. In this case, a struct blk_independent_access_ranges is attached to the device request queue by the function disk_set_independent_access_ranges(). The function disk_alloc_independent_access_ranges() is provided for drivers to allocate this structure. struct blk_independent_access_ranges contains kobjects (struct kobject) to expose to the user through sysfs the set of independent access ranges supported by a device. When the device is initialized, sysfs registration of the ranges information is done from blk_register_queue() using the block layer internal function disk_register_independent_access_ranges(). If a driver calls disk_set_independent_access_ranges() for a registered queue, e.g. when a device is revalidated, disk_set_independent_access_ranges() will execute disk_register_independent_access_ranges() to update the sysfs attribute files. The sysfs file structure created starts from the independent_access_ranges sub-directory and contains the start sector and number of sectors of each range, with the information for each range grouped in numbered sub-directories. E.g. for a dual actuator HDD, the user sees: $ tree /sys/block/sdk/queue/independent_access_ranges/ /sys/block/sdk/queue/independent_access_ranges/ |-- 0 | |-- nr_sectors | `-- sector `-- 1 |-- nr_sectors `-- sector For a regular device with a single access range, the independent_access_ranges sysfs directory does not exist. Device revalidation may lead to changes to this structure and to the attribute values. When manipulated, the queue sysfs_lock and sysfs_dir_lock mutexes are held for atomicity, similarly to how the blk-mq and elevator sysfs queue sub-directories are protected. The code related to the management of independent access ranges is added in the new file block/blk-ia-ranges.c. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Link: https://lore.kernel.org/r/20211027022223.183838-2-damien.lemoal@wdc.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-27 02:22:19 +00:00
.sysfs_ops = &blk_ia_range_sysfs_ops,
.default_groups = blk_ia_range_groups,
.release = blk_ia_range_sysfs_nop_release,
};
/*
* This will be executed only after all independent access range entries are
* removed with kobject_del(), at which point, it is safe to free everything,
* including the array of ranges.
*/
static void blk_ia_ranges_sysfs_release(struct kobject *kobj)
{
struct blk_independent_access_ranges *iars =
container_of(kobj, struct blk_independent_access_ranges, kobj);
kfree(iars);
}
static const struct kobj_type blk_ia_ranges_ktype = {
block: Add independent access ranges support The Concurrent Positioning Ranges VPD page (for SCSI) and data log page (for ATA) contain parameters describing the set of contiguous LBAs that can be served independently by a single LUN multi-actuator hard-disk. Similarly, a logically defined block device composed of multiple disks can in some cases execute requests directed at different sector ranges in parallel. A dm-linear device aggregating 2 block devices together is an example. This patch implements support for exposing a block device independent access ranges to the user through sysfs to allow optimizing device accesses to increase performance. To describe the set of independent sector ranges of a device (actuators of a multi-actuator HDDs or table entries of a dm-linear device), The type struct blk_independent_access_ranges is introduced. This structure describes the sector ranges using an array of struct blk_independent_access_range structures. This range structure defines the start sector and number of sectors of the access range. The ranges in the array cannot overlap and must contain all sectors within the device capacity. The function disk_set_independent_access_ranges() allows a device driver to signal to the block layer that a device has multiple independent access ranges. In this case, a struct blk_independent_access_ranges is attached to the device request queue by the function disk_set_independent_access_ranges(). The function disk_alloc_independent_access_ranges() is provided for drivers to allocate this structure. struct blk_independent_access_ranges contains kobjects (struct kobject) to expose to the user through sysfs the set of independent access ranges supported by a device. When the device is initialized, sysfs registration of the ranges information is done from blk_register_queue() using the block layer internal function disk_register_independent_access_ranges(). If a driver calls disk_set_independent_access_ranges() for a registered queue, e.g. when a device is revalidated, disk_set_independent_access_ranges() will execute disk_register_independent_access_ranges() to update the sysfs attribute files. The sysfs file structure created starts from the independent_access_ranges sub-directory and contains the start sector and number of sectors of each range, with the information for each range grouped in numbered sub-directories. E.g. for a dual actuator HDD, the user sees: $ tree /sys/block/sdk/queue/independent_access_ranges/ /sys/block/sdk/queue/independent_access_ranges/ |-- 0 | |-- nr_sectors | `-- sector `-- 1 |-- nr_sectors `-- sector For a regular device with a single access range, the independent_access_ranges sysfs directory does not exist. Device revalidation may lead to changes to this structure and to the attribute values. When manipulated, the queue sysfs_lock and sysfs_dir_lock mutexes are held for atomicity, similarly to how the blk-mq and elevator sysfs queue sub-directories are protected. The code related to the management of independent access ranges is added in the new file block/blk-ia-ranges.c. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Link: https://lore.kernel.org/r/20211027022223.183838-2-damien.lemoal@wdc.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-27 02:22:19 +00:00
.release = blk_ia_ranges_sysfs_release,
};
/**
* disk_register_independent_access_ranges - register with sysfs a set of
* independent access ranges
block: Add independent access ranges support The Concurrent Positioning Ranges VPD page (for SCSI) and data log page (for ATA) contain parameters describing the set of contiguous LBAs that can be served independently by a single LUN multi-actuator hard-disk. Similarly, a logically defined block device composed of multiple disks can in some cases execute requests directed at different sector ranges in parallel. A dm-linear device aggregating 2 block devices together is an example. This patch implements support for exposing a block device independent access ranges to the user through sysfs to allow optimizing device accesses to increase performance. To describe the set of independent sector ranges of a device (actuators of a multi-actuator HDDs or table entries of a dm-linear device), The type struct blk_independent_access_ranges is introduced. This structure describes the sector ranges using an array of struct blk_independent_access_range structures. This range structure defines the start sector and number of sectors of the access range. The ranges in the array cannot overlap and must contain all sectors within the device capacity. The function disk_set_independent_access_ranges() allows a device driver to signal to the block layer that a device has multiple independent access ranges. In this case, a struct blk_independent_access_ranges is attached to the device request queue by the function disk_set_independent_access_ranges(). The function disk_alloc_independent_access_ranges() is provided for drivers to allocate this structure. struct blk_independent_access_ranges contains kobjects (struct kobject) to expose to the user through sysfs the set of independent access ranges supported by a device. When the device is initialized, sysfs registration of the ranges information is done from blk_register_queue() using the block layer internal function disk_register_independent_access_ranges(). If a driver calls disk_set_independent_access_ranges() for a registered queue, e.g. when a device is revalidated, disk_set_independent_access_ranges() will execute disk_register_independent_access_ranges() to update the sysfs attribute files. The sysfs file structure created starts from the independent_access_ranges sub-directory and contains the start sector and number of sectors of each range, with the information for each range grouped in numbered sub-directories. E.g. for a dual actuator HDD, the user sees: $ tree /sys/block/sdk/queue/independent_access_ranges/ /sys/block/sdk/queue/independent_access_ranges/ |-- 0 | |-- nr_sectors | `-- sector `-- 1 |-- nr_sectors `-- sector For a regular device with a single access range, the independent_access_ranges sysfs directory does not exist. Device revalidation may lead to changes to this structure and to the attribute values. When manipulated, the queue sysfs_lock and sysfs_dir_lock mutexes are held for atomicity, similarly to how the blk-mq and elevator sysfs queue sub-directories are protected. The code related to the management of independent access ranges is added in the new file block/blk-ia-ranges.c. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Link: https://lore.kernel.org/r/20211027022223.183838-2-damien.lemoal@wdc.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-27 02:22:19 +00:00
* @disk: Target disk
*
* Register with sysfs a set of independent access ranges for @disk.
*/
int disk_register_independent_access_ranges(struct gendisk *disk)
block: Add independent access ranges support The Concurrent Positioning Ranges VPD page (for SCSI) and data log page (for ATA) contain parameters describing the set of contiguous LBAs that can be served independently by a single LUN multi-actuator hard-disk. Similarly, a logically defined block device composed of multiple disks can in some cases execute requests directed at different sector ranges in parallel. A dm-linear device aggregating 2 block devices together is an example. This patch implements support for exposing a block device independent access ranges to the user through sysfs to allow optimizing device accesses to increase performance. To describe the set of independent sector ranges of a device (actuators of a multi-actuator HDDs or table entries of a dm-linear device), The type struct blk_independent_access_ranges is introduced. This structure describes the sector ranges using an array of struct blk_independent_access_range structures. This range structure defines the start sector and number of sectors of the access range. The ranges in the array cannot overlap and must contain all sectors within the device capacity. The function disk_set_independent_access_ranges() allows a device driver to signal to the block layer that a device has multiple independent access ranges. In this case, a struct blk_independent_access_ranges is attached to the device request queue by the function disk_set_independent_access_ranges(). The function disk_alloc_independent_access_ranges() is provided for drivers to allocate this structure. struct blk_independent_access_ranges contains kobjects (struct kobject) to expose to the user through sysfs the set of independent access ranges supported by a device. When the device is initialized, sysfs registration of the ranges information is done from blk_register_queue() using the block layer internal function disk_register_independent_access_ranges(). If a driver calls disk_set_independent_access_ranges() for a registered queue, e.g. when a device is revalidated, disk_set_independent_access_ranges() will execute disk_register_independent_access_ranges() to update the sysfs attribute files. The sysfs file structure created starts from the independent_access_ranges sub-directory and contains the start sector and number of sectors of each range, with the information for each range grouped in numbered sub-directories. E.g. for a dual actuator HDD, the user sees: $ tree /sys/block/sdk/queue/independent_access_ranges/ /sys/block/sdk/queue/independent_access_ranges/ |-- 0 | |-- nr_sectors | `-- sector `-- 1 |-- nr_sectors `-- sector For a regular device with a single access range, the independent_access_ranges sysfs directory does not exist. Device revalidation may lead to changes to this structure and to the attribute values. When manipulated, the queue sysfs_lock and sysfs_dir_lock mutexes are held for atomicity, similarly to how the blk-mq and elevator sysfs queue sub-directories are protected. The code related to the management of independent access ranges is added in the new file block/blk-ia-ranges.c. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Link: https://lore.kernel.org/r/20211027022223.183838-2-damien.lemoal@wdc.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-27 02:22:19 +00:00
{
struct blk_independent_access_ranges *iars = disk->ia_ranges;
block: Add independent access ranges support The Concurrent Positioning Ranges VPD page (for SCSI) and data log page (for ATA) contain parameters describing the set of contiguous LBAs that can be served independently by a single LUN multi-actuator hard-disk. Similarly, a logically defined block device composed of multiple disks can in some cases execute requests directed at different sector ranges in parallel. A dm-linear device aggregating 2 block devices together is an example. This patch implements support for exposing a block device independent access ranges to the user through sysfs to allow optimizing device accesses to increase performance. To describe the set of independent sector ranges of a device (actuators of a multi-actuator HDDs or table entries of a dm-linear device), The type struct blk_independent_access_ranges is introduced. This structure describes the sector ranges using an array of struct blk_independent_access_range structures. This range structure defines the start sector and number of sectors of the access range. The ranges in the array cannot overlap and must contain all sectors within the device capacity. The function disk_set_independent_access_ranges() allows a device driver to signal to the block layer that a device has multiple independent access ranges. In this case, a struct blk_independent_access_ranges is attached to the device request queue by the function disk_set_independent_access_ranges(). The function disk_alloc_independent_access_ranges() is provided for drivers to allocate this structure. struct blk_independent_access_ranges contains kobjects (struct kobject) to expose to the user through sysfs the set of independent access ranges supported by a device. When the device is initialized, sysfs registration of the ranges information is done from blk_register_queue() using the block layer internal function disk_register_independent_access_ranges(). If a driver calls disk_set_independent_access_ranges() for a registered queue, e.g. when a device is revalidated, disk_set_independent_access_ranges() will execute disk_register_independent_access_ranges() to update the sysfs attribute files. The sysfs file structure created starts from the independent_access_ranges sub-directory and contains the start sector and number of sectors of each range, with the information for each range grouped in numbered sub-directories. E.g. for a dual actuator HDD, the user sees: $ tree /sys/block/sdk/queue/independent_access_ranges/ /sys/block/sdk/queue/independent_access_ranges/ |-- 0 | |-- nr_sectors | `-- sector `-- 1 |-- nr_sectors `-- sector For a regular device with a single access range, the independent_access_ranges sysfs directory does not exist. Device revalidation may lead to changes to this structure and to the attribute values. When manipulated, the queue sysfs_lock and sysfs_dir_lock mutexes are held for atomicity, similarly to how the blk-mq and elevator sysfs queue sub-directories are protected. The code related to the management of independent access ranges is added in the new file block/blk-ia-ranges.c. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Link: https://lore.kernel.org/r/20211027022223.183838-2-damien.lemoal@wdc.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-27 02:22:19 +00:00
struct request_queue *q = disk->queue;
int i, ret;
lockdep_assert_held(&q->sysfs_dir_lock);
lockdep_assert_held(&q->sysfs_lock);
if (!iars)
return 0;
/*
* At this point, iars is the new set of sector access ranges that needs
* to be registered with sysfs.
*/
WARN_ON(iars->sysfs_registered);
ret = kobject_init_and_add(&iars->kobj, &blk_ia_ranges_ktype,
&disk->queue_kobj, "%s",
"independent_access_ranges");
block: Add independent access ranges support The Concurrent Positioning Ranges VPD page (for SCSI) and data log page (for ATA) contain parameters describing the set of contiguous LBAs that can be served independently by a single LUN multi-actuator hard-disk. Similarly, a logically defined block device composed of multiple disks can in some cases execute requests directed at different sector ranges in parallel. A dm-linear device aggregating 2 block devices together is an example. This patch implements support for exposing a block device independent access ranges to the user through sysfs to allow optimizing device accesses to increase performance. To describe the set of independent sector ranges of a device (actuators of a multi-actuator HDDs or table entries of a dm-linear device), The type struct blk_independent_access_ranges is introduced. This structure describes the sector ranges using an array of struct blk_independent_access_range structures. This range structure defines the start sector and number of sectors of the access range. The ranges in the array cannot overlap and must contain all sectors within the device capacity. The function disk_set_independent_access_ranges() allows a device driver to signal to the block layer that a device has multiple independent access ranges. In this case, a struct blk_independent_access_ranges is attached to the device request queue by the function disk_set_independent_access_ranges(). The function disk_alloc_independent_access_ranges() is provided for drivers to allocate this structure. struct blk_independent_access_ranges contains kobjects (struct kobject) to expose to the user through sysfs the set of independent access ranges supported by a device. When the device is initialized, sysfs registration of the ranges information is done from blk_register_queue() using the block layer internal function disk_register_independent_access_ranges(). If a driver calls disk_set_independent_access_ranges() for a registered queue, e.g. when a device is revalidated, disk_set_independent_access_ranges() will execute disk_register_independent_access_ranges() to update the sysfs attribute files. The sysfs file structure created starts from the independent_access_ranges sub-directory and contains the start sector and number of sectors of each range, with the information for each range grouped in numbered sub-directories. E.g. for a dual actuator HDD, the user sees: $ tree /sys/block/sdk/queue/independent_access_ranges/ /sys/block/sdk/queue/independent_access_ranges/ |-- 0 | |-- nr_sectors | `-- sector `-- 1 |-- nr_sectors `-- sector For a regular device with a single access range, the independent_access_ranges sysfs directory does not exist. Device revalidation may lead to changes to this structure and to the attribute values. When manipulated, the queue sysfs_lock and sysfs_dir_lock mutexes are held for atomicity, similarly to how the blk-mq and elevator sysfs queue sub-directories are protected. The code related to the management of independent access ranges is added in the new file block/blk-ia-ranges.c. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Link: https://lore.kernel.org/r/20211027022223.183838-2-damien.lemoal@wdc.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-27 02:22:19 +00:00
if (ret) {
disk->ia_ranges = NULL;
kobject_put(&iars->kobj);
block: Add independent access ranges support The Concurrent Positioning Ranges VPD page (for SCSI) and data log page (for ATA) contain parameters describing the set of contiguous LBAs that can be served independently by a single LUN multi-actuator hard-disk. Similarly, a logically defined block device composed of multiple disks can in some cases execute requests directed at different sector ranges in parallel. A dm-linear device aggregating 2 block devices together is an example. This patch implements support for exposing a block device independent access ranges to the user through sysfs to allow optimizing device accesses to increase performance. To describe the set of independent sector ranges of a device (actuators of a multi-actuator HDDs or table entries of a dm-linear device), The type struct blk_independent_access_ranges is introduced. This structure describes the sector ranges using an array of struct blk_independent_access_range structures. This range structure defines the start sector and number of sectors of the access range. The ranges in the array cannot overlap and must contain all sectors within the device capacity. The function disk_set_independent_access_ranges() allows a device driver to signal to the block layer that a device has multiple independent access ranges. In this case, a struct blk_independent_access_ranges is attached to the device request queue by the function disk_set_independent_access_ranges(). The function disk_alloc_independent_access_ranges() is provided for drivers to allocate this structure. struct blk_independent_access_ranges contains kobjects (struct kobject) to expose to the user through sysfs the set of independent access ranges supported by a device. When the device is initialized, sysfs registration of the ranges information is done from blk_register_queue() using the block layer internal function disk_register_independent_access_ranges(). If a driver calls disk_set_independent_access_ranges() for a registered queue, e.g. when a device is revalidated, disk_set_independent_access_ranges() will execute disk_register_independent_access_ranges() to update the sysfs attribute files. The sysfs file structure created starts from the independent_access_ranges sub-directory and contains the start sector and number of sectors of each range, with the information for each range grouped in numbered sub-directories. E.g. for a dual actuator HDD, the user sees: $ tree /sys/block/sdk/queue/independent_access_ranges/ /sys/block/sdk/queue/independent_access_ranges/ |-- 0 | |-- nr_sectors | `-- sector `-- 1 |-- nr_sectors `-- sector For a regular device with a single access range, the independent_access_ranges sysfs directory does not exist. Device revalidation may lead to changes to this structure and to the attribute values. When manipulated, the queue sysfs_lock and sysfs_dir_lock mutexes are held for atomicity, similarly to how the blk-mq and elevator sysfs queue sub-directories are protected. The code related to the management of independent access ranges is added in the new file block/blk-ia-ranges.c. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Link: https://lore.kernel.org/r/20211027022223.183838-2-damien.lemoal@wdc.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-27 02:22:19 +00:00
return ret;
}
for (i = 0; i < iars->nr_ia_ranges; i++) {
ret = kobject_init_and_add(&iars->ia_range[i].kobj,
&blk_ia_range_ktype, &iars->kobj,
"%d", i);
if (ret) {
while (--i >= 0)
kobject_del(&iars->ia_range[i].kobj);
kobject_del(&iars->kobj);
kobject_put(&iars->kobj);
return ret;
}
}
iars->sysfs_registered = true;
return 0;
}
void disk_unregister_independent_access_ranges(struct gendisk *disk)
{
struct request_queue *q = disk->queue;
struct blk_independent_access_ranges *iars = disk->ia_ranges;
block: Add independent access ranges support The Concurrent Positioning Ranges VPD page (for SCSI) and data log page (for ATA) contain parameters describing the set of contiguous LBAs that can be served independently by a single LUN multi-actuator hard-disk. Similarly, a logically defined block device composed of multiple disks can in some cases execute requests directed at different sector ranges in parallel. A dm-linear device aggregating 2 block devices together is an example. This patch implements support for exposing a block device independent access ranges to the user through sysfs to allow optimizing device accesses to increase performance. To describe the set of independent sector ranges of a device (actuators of a multi-actuator HDDs or table entries of a dm-linear device), The type struct blk_independent_access_ranges is introduced. This structure describes the sector ranges using an array of struct blk_independent_access_range structures. This range structure defines the start sector and number of sectors of the access range. The ranges in the array cannot overlap and must contain all sectors within the device capacity. The function disk_set_independent_access_ranges() allows a device driver to signal to the block layer that a device has multiple independent access ranges. In this case, a struct blk_independent_access_ranges is attached to the device request queue by the function disk_set_independent_access_ranges(). The function disk_alloc_independent_access_ranges() is provided for drivers to allocate this structure. struct blk_independent_access_ranges contains kobjects (struct kobject) to expose to the user through sysfs the set of independent access ranges supported by a device. When the device is initialized, sysfs registration of the ranges information is done from blk_register_queue() using the block layer internal function disk_register_independent_access_ranges(). If a driver calls disk_set_independent_access_ranges() for a registered queue, e.g. when a device is revalidated, disk_set_independent_access_ranges() will execute disk_register_independent_access_ranges() to update the sysfs attribute files. The sysfs file structure created starts from the independent_access_ranges sub-directory and contains the start sector and number of sectors of each range, with the information for each range grouped in numbered sub-directories. E.g. for a dual actuator HDD, the user sees: $ tree /sys/block/sdk/queue/independent_access_ranges/ /sys/block/sdk/queue/independent_access_ranges/ |-- 0 | |-- nr_sectors | `-- sector `-- 1 |-- nr_sectors `-- sector For a regular device with a single access range, the independent_access_ranges sysfs directory does not exist. Device revalidation may lead to changes to this structure and to the attribute values. When manipulated, the queue sysfs_lock and sysfs_dir_lock mutexes are held for atomicity, similarly to how the blk-mq and elevator sysfs queue sub-directories are protected. The code related to the management of independent access ranges is added in the new file block/blk-ia-ranges.c. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Link: https://lore.kernel.org/r/20211027022223.183838-2-damien.lemoal@wdc.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-27 02:22:19 +00:00
int i;
lockdep_assert_held(&q->sysfs_dir_lock);
lockdep_assert_held(&q->sysfs_lock);
if (!iars)
return;
if (iars->sysfs_registered) {
for (i = 0; i < iars->nr_ia_ranges; i++)
kobject_del(&iars->ia_range[i].kobj);
kobject_del(&iars->kobj);
kobject_put(&iars->kobj);
} else {
kfree(iars);
}
disk->ia_ranges = NULL;
block: Add independent access ranges support The Concurrent Positioning Ranges VPD page (for SCSI) and data log page (for ATA) contain parameters describing the set of contiguous LBAs that can be served independently by a single LUN multi-actuator hard-disk. Similarly, a logically defined block device composed of multiple disks can in some cases execute requests directed at different sector ranges in parallel. A dm-linear device aggregating 2 block devices together is an example. This patch implements support for exposing a block device independent access ranges to the user through sysfs to allow optimizing device accesses to increase performance. To describe the set of independent sector ranges of a device (actuators of a multi-actuator HDDs or table entries of a dm-linear device), The type struct blk_independent_access_ranges is introduced. This structure describes the sector ranges using an array of struct blk_independent_access_range structures. This range structure defines the start sector and number of sectors of the access range. The ranges in the array cannot overlap and must contain all sectors within the device capacity. The function disk_set_independent_access_ranges() allows a device driver to signal to the block layer that a device has multiple independent access ranges. In this case, a struct blk_independent_access_ranges is attached to the device request queue by the function disk_set_independent_access_ranges(). The function disk_alloc_independent_access_ranges() is provided for drivers to allocate this structure. struct blk_independent_access_ranges contains kobjects (struct kobject) to expose to the user through sysfs the set of independent access ranges supported by a device. When the device is initialized, sysfs registration of the ranges information is done from blk_register_queue() using the block layer internal function disk_register_independent_access_ranges(). If a driver calls disk_set_independent_access_ranges() for a registered queue, e.g. when a device is revalidated, disk_set_independent_access_ranges() will execute disk_register_independent_access_ranges() to update the sysfs attribute files. The sysfs file structure created starts from the independent_access_ranges sub-directory and contains the start sector and number of sectors of each range, with the information for each range grouped in numbered sub-directories. E.g. for a dual actuator HDD, the user sees: $ tree /sys/block/sdk/queue/independent_access_ranges/ /sys/block/sdk/queue/independent_access_ranges/ |-- 0 | |-- nr_sectors | `-- sector `-- 1 |-- nr_sectors `-- sector For a regular device with a single access range, the independent_access_ranges sysfs directory does not exist. Device revalidation may lead to changes to this structure and to the attribute values. When manipulated, the queue sysfs_lock and sysfs_dir_lock mutexes are held for atomicity, similarly to how the blk-mq and elevator sysfs queue sub-directories are protected. The code related to the management of independent access ranges is added in the new file block/blk-ia-ranges.c. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Link: https://lore.kernel.org/r/20211027022223.183838-2-damien.lemoal@wdc.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-27 02:22:19 +00:00
}
static struct blk_independent_access_range *
disk_find_ia_range(struct blk_independent_access_ranges *iars,
sector_t sector)
{
struct blk_independent_access_range *iar;
int i;
for (i = 0; i < iars->nr_ia_ranges; i++) {
iar = &iars->ia_range[i];
if (sector >= iar->sector &&
sector < iar->sector + iar->nr_sectors)
return iar;
}
return NULL;
}
static bool disk_check_ia_ranges(struct gendisk *disk,
struct blk_independent_access_ranges *iars)
{
struct blk_independent_access_range *iar, *tmp;
sector_t capacity = get_capacity(disk);
sector_t sector = 0;
int i;
if (WARN_ON_ONCE(!iars->nr_ia_ranges))
return false;
block: Add independent access ranges support The Concurrent Positioning Ranges VPD page (for SCSI) and data log page (for ATA) contain parameters describing the set of contiguous LBAs that can be served independently by a single LUN multi-actuator hard-disk. Similarly, a logically defined block device composed of multiple disks can in some cases execute requests directed at different sector ranges in parallel. A dm-linear device aggregating 2 block devices together is an example. This patch implements support for exposing a block device independent access ranges to the user through sysfs to allow optimizing device accesses to increase performance. To describe the set of independent sector ranges of a device (actuators of a multi-actuator HDDs or table entries of a dm-linear device), The type struct blk_independent_access_ranges is introduced. This structure describes the sector ranges using an array of struct blk_independent_access_range structures. This range structure defines the start sector and number of sectors of the access range. The ranges in the array cannot overlap and must contain all sectors within the device capacity. The function disk_set_independent_access_ranges() allows a device driver to signal to the block layer that a device has multiple independent access ranges. In this case, a struct blk_independent_access_ranges is attached to the device request queue by the function disk_set_independent_access_ranges(). The function disk_alloc_independent_access_ranges() is provided for drivers to allocate this structure. struct blk_independent_access_ranges contains kobjects (struct kobject) to expose to the user through sysfs the set of independent access ranges supported by a device. When the device is initialized, sysfs registration of the ranges information is done from blk_register_queue() using the block layer internal function disk_register_independent_access_ranges(). If a driver calls disk_set_independent_access_ranges() for a registered queue, e.g. when a device is revalidated, disk_set_independent_access_ranges() will execute disk_register_independent_access_ranges() to update the sysfs attribute files. The sysfs file structure created starts from the independent_access_ranges sub-directory and contains the start sector and number of sectors of each range, with the information for each range grouped in numbered sub-directories. E.g. for a dual actuator HDD, the user sees: $ tree /sys/block/sdk/queue/independent_access_ranges/ /sys/block/sdk/queue/independent_access_ranges/ |-- 0 | |-- nr_sectors | `-- sector `-- 1 |-- nr_sectors `-- sector For a regular device with a single access range, the independent_access_ranges sysfs directory does not exist. Device revalidation may lead to changes to this structure and to the attribute values. When manipulated, the queue sysfs_lock and sysfs_dir_lock mutexes are held for atomicity, similarly to how the blk-mq and elevator sysfs queue sub-directories are protected. The code related to the management of independent access ranges is added in the new file block/blk-ia-ranges.c. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Link: https://lore.kernel.org/r/20211027022223.183838-2-damien.lemoal@wdc.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-27 02:22:19 +00:00
/*
* While sorting the ranges in increasing LBA order, check that the
* ranges do not overlap, that there are no sector holes and that all
* sectors belong to one range.
*/
for (i = 0; i < iars->nr_ia_ranges; i++) {
tmp = disk_find_ia_range(iars, sector);
if (!tmp || tmp->sector != sector) {
pr_warn("Invalid non-contiguous independent access ranges\n");
return false;
}
iar = &iars->ia_range[i];
if (tmp != iar) {
swap(iar->sector, tmp->sector);
swap(iar->nr_sectors, tmp->nr_sectors);
}
sector += iar->nr_sectors;
}
if (sector != capacity) {
pr_warn("Independent access ranges do not match disk capacity\n");
return false;
}
return true;
}
static bool disk_ia_ranges_changed(struct gendisk *disk,
struct blk_independent_access_ranges *new)
{
struct blk_independent_access_ranges *old = disk->ia_ranges;
block: Add independent access ranges support The Concurrent Positioning Ranges VPD page (for SCSI) and data log page (for ATA) contain parameters describing the set of contiguous LBAs that can be served independently by a single LUN multi-actuator hard-disk. Similarly, a logically defined block device composed of multiple disks can in some cases execute requests directed at different sector ranges in parallel. A dm-linear device aggregating 2 block devices together is an example. This patch implements support for exposing a block device independent access ranges to the user through sysfs to allow optimizing device accesses to increase performance. To describe the set of independent sector ranges of a device (actuators of a multi-actuator HDDs or table entries of a dm-linear device), The type struct blk_independent_access_ranges is introduced. This structure describes the sector ranges using an array of struct blk_independent_access_range structures. This range structure defines the start sector and number of sectors of the access range. The ranges in the array cannot overlap and must contain all sectors within the device capacity. The function disk_set_independent_access_ranges() allows a device driver to signal to the block layer that a device has multiple independent access ranges. In this case, a struct blk_independent_access_ranges is attached to the device request queue by the function disk_set_independent_access_ranges(). The function disk_alloc_independent_access_ranges() is provided for drivers to allocate this structure. struct blk_independent_access_ranges contains kobjects (struct kobject) to expose to the user through sysfs the set of independent access ranges supported by a device. When the device is initialized, sysfs registration of the ranges information is done from blk_register_queue() using the block layer internal function disk_register_independent_access_ranges(). If a driver calls disk_set_independent_access_ranges() for a registered queue, e.g. when a device is revalidated, disk_set_independent_access_ranges() will execute disk_register_independent_access_ranges() to update the sysfs attribute files. The sysfs file structure created starts from the independent_access_ranges sub-directory and contains the start sector and number of sectors of each range, with the information for each range grouped in numbered sub-directories. E.g. for a dual actuator HDD, the user sees: $ tree /sys/block/sdk/queue/independent_access_ranges/ /sys/block/sdk/queue/independent_access_ranges/ |-- 0 | |-- nr_sectors | `-- sector `-- 1 |-- nr_sectors `-- sector For a regular device with a single access range, the independent_access_ranges sysfs directory does not exist. Device revalidation may lead to changes to this structure and to the attribute values. When manipulated, the queue sysfs_lock and sysfs_dir_lock mutexes are held for atomicity, similarly to how the blk-mq and elevator sysfs queue sub-directories are protected. The code related to the management of independent access ranges is added in the new file block/blk-ia-ranges.c. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Link: https://lore.kernel.org/r/20211027022223.183838-2-damien.lemoal@wdc.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-27 02:22:19 +00:00
int i;
if (!old)
return true;
if (old->nr_ia_ranges != new->nr_ia_ranges)
return true;
for (i = 0; i < old->nr_ia_ranges; i++) {
if (new->ia_range[i].sector != old->ia_range[i].sector ||
new->ia_range[i].nr_sectors != old->ia_range[i].nr_sectors)
return true;
}
return false;
}
/**
* disk_alloc_independent_access_ranges - Allocate an independent access ranges
* data structure
* @disk: target disk
* @nr_ia_ranges: Number of independent access ranges
*
* Allocate a struct blk_independent_access_ranges structure with @nr_ia_ranges
* access range descriptors.
*/
struct blk_independent_access_ranges *
disk_alloc_independent_access_ranges(struct gendisk *disk, int nr_ia_ranges)
{
struct blk_independent_access_ranges *iars;
iars = kzalloc_node(struct_size(iars, ia_range, nr_ia_ranges),
GFP_KERNEL, disk->queue->node);
if (iars)
iars->nr_ia_ranges = nr_ia_ranges;
return iars;
}
EXPORT_SYMBOL_GPL(disk_alloc_independent_access_ranges);
/**
* disk_set_independent_access_ranges - Set a disk independent access ranges
* @disk: target disk
* @iars: independent access ranges structure
*
* Set the independent access ranges information of the request queue
* of @disk to @iars. If @iars is NULL and the independent access ranges
* structure already set is cleared. If there are no differences between
* @iars and the independent access ranges structure already set, @iars
* is freed.
*/
void disk_set_independent_access_ranges(struct gendisk *disk,
struct blk_independent_access_ranges *iars)
{
struct request_queue *q = disk->queue;
mutex_lock(&q->sysfs_dir_lock);
mutex_lock(&q->sysfs_lock);
if (iars && !disk_check_ia_ranges(disk, iars)) {
block: Add independent access ranges support The Concurrent Positioning Ranges VPD page (for SCSI) and data log page (for ATA) contain parameters describing the set of contiguous LBAs that can be served independently by a single LUN multi-actuator hard-disk. Similarly, a logically defined block device composed of multiple disks can in some cases execute requests directed at different sector ranges in parallel. A dm-linear device aggregating 2 block devices together is an example. This patch implements support for exposing a block device independent access ranges to the user through sysfs to allow optimizing device accesses to increase performance. To describe the set of independent sector ranges of a device (actuators of a multi-actuator HDDs or table entries of a dm-linear device), The type struct blk_independent_access_ranges is introduced. This structure describes the sector ranges using an array of struct blk_independent_access_range structures. This range structure defines the start sector and number of sectors of the access range. The ranges in the array cannot overlap and must contain all sectors within the device capacity. The function disk_set_independent_access_ranges() allows a device driver to signal to the block layer that a device has multiple independent access ranges. In this case, a struct blk_independent_access_ranges is attached to the device request queue by the function disk_set_independent_access_ranges(). The function disk_alloc_independent_access_ranges() is provided for drivers to allocate this structure. struct blk_independent_access_ranges contains kobjects (struct kobject) to expose to the user through sysfs the set of independent access ranges supported by a device. When the device is initialized, sysfs registration of the ranges information is done from blk_register_queue() using the block layer internal function disk_register_independent_access_ranges(). If a driver calls disk_set_independent_access_ranges() for a registered queue, e.g. when a device is revalidated, disk_set_independent_access_ranges() will execute disk_register_independent_access_ranges() to update the sysfs attribute files. The sysfs file structure created starts from the independent_access_ranges sub-directory and contains the start sector and number of sectors of each range, with the information for each range grouped in numbered sub-directories. E.g. for a dual actuator HDD, the user sees: $ tree /sys/block/sdk/queue/independent_access_ranges/ /sys/block/sdk/queue/independent_access_ranges/ |-- 0 | |-- nr_sectors | `-- sector `-- 1 |-- nr_sectors `-- sector For a regular device with a single access range, the independent_access_ranges sysfs directory does not exist. Device revalidation may lead to changes to this structure and to the attribute values. When manipulated, the queue sysfs_lock and sysfs_dir_lock mutexes are held for atomicity, similarly to how the blk-mq and elevator sysfs queue sub-directories are protected. The code related to the management of independent access ranges is added in the new file block/blk-ia-ranges.c. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Link: https://lore.kernel.org/r/20211027022223.183838-2-damien.lemoal@wdc.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-27 02:22:19 +00:00
kfree(iars);
iars = NULL;
}
if (iars && !disk_ia_ranges_changed(disk, iars)) {
kfree(iars);
goto unlock;
block: Add independent access ranges support The Concurrent Positioning Ranges VPD page (for SCSI) and data log page (for ATA) contain parameters describing the set of contiguous LBAs that can be served independently by a single LUN multi-actuator hard-disk. Similarly, a logically defined block device composed of multiple disks can in some cases execute requests directed at different sector ranges in parallel. A dm-linear device aggregating 2 block devices together is an example. This patch implements support for exposing a block device independent access ranges to the user through sysfs to allow optimizing device accesses to increase performance. To describe the set of independent sector ranges of a device (actuators of a multi-actuator HDDs or table entries of a dm-linear device), The type struct blk_independent_access_ranges is introduced. This structure describes the sector ranges using an array of struct blk_independent_access_range structures. This range structure defines the start sector and number of sectors of the access range. The ranges in the array cannot overlap and must contain all sectors within the device capacity. The function disk_set_independent_access_ranges() allows a device driver to signal to the block layer that a device has multiple independent access ranges. In this case, a struct blk_independent_access_ranges is attached to the device request queue by the function disk_set_independent_access_ranges(). The function disk_alloc_independent_access_ranges() is provided for drivers to allocate this structure. struct blk_independent_access_ranges contains kobjects (struct kobject) to expose to the user through sysfs the set of independent access ranges supported by a device. When the device is initialized, sysfs registration of the ranges information is done from blk_register_queue() using the block layer internal function disk_register_independent_access_ranges(). If a driver calls disk_set_independent_access_ranges() for a registered queue, e.g. when a device is revalidated, disk_set_independent_access_ranges() will execute disk_register_independent_access_ranges() to update the sysfs attribute files. The sysfs file structure created starts from the independent_access_ranges sub-directory and contains the start sector and number of sectors of each range, with the information for each range grouped in numbered sub-directories. E.g. for a dual actuator HDD, the user sees: $ tree /sys/block/sdk/queue/independent_access_ranges/ /sys/block/sdk/queue/independent_access_ranges/ |-- 0 | |-- nr_sectors | `-- sector `-- 1 |-- nr_sectors `-- sector For a regular device with a single access range, the independent_access_ranges sysfs directory does not exist. Device revalidation may lead to changes to this structure and to the attribute values. When manipulated, the queue sysfs_lock and sysfs_dir_lock mutexes are held for atomicity, similarly to how the blk-mq and elevator sysfs queue sub-directories are protected. The code related to the management of independent access ranges is added in the new file block/blk-ia-ranges.c. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Link: https://lore.kernel.org/r/20211027022223.183838-2-damien.lemoal@wdc.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-27 02:22:19 +00:00
}
/*
* This may be called for a registered queue. E.g. during a device
* revalidation. If that is the case, we need to unregister the old
* set of independent access ranges and register the new set. If the
* queue is not registered, registration of the device request queue
* will register the independent access ranges.
block: Add independent access ranges support The Concurrent Positioning Ranges VPD page (for SCSI) and data log page (for ATA) contain parameters describing the set of contiguous LBAs that can be served independently by a single LUN multi-actuator hard-disk. Similarly, a logically defined block device composed of multiple disks can in some cases execute requests directed at different sector ranges in parallel. A dm-linear device aggregating 2 block devices together is an example. This patch implements support for exposing a block device independent access ranges to the user through sysfs to allow optimizing device accesses to increase performance. To describe the set of independent sector ranges of a device (actuators of a multi-actuator HDDs or table entries of a dm-linear device), The type struct blk_independent_access_ranges is introduced. This structure describes the sector ranges using an array of struct blk_independent_access_range structures. This range structure defines the start sector and number of sectors of the access range. The ranges in the array cannot overlap and must contain all sectors within the device capacity. The function disk_set_independent_access_ranges() allows a device driver to signal to the block layer that a device has multiple independent access ranges. In this case, a struct blk_independent_access_ranges is attached to the device request queue by the function disk_set_independent_access_ranges(). The function disk_alloc_independent_access_ranges() is provided for drivers to allocate this structure. struct blk_independent_access_ranges contains kobjects (struct kobject) to expose to the user through sysfs the set of independent access ranges supported by a device. When the device is initialized, sysfs registration of the ranges information is done from blk_register_queue() using the block layer internal function disk_register_independent_access_ranges(). If a driver calls disk_set_independent_access_ranges() for a registered queue, e.g. when a device is revalidated, disk_set_independent_access_ranges() will execute disk_register_independent_access_ranges() to update the sysfs attribute files. The sysfs file structure created starts from the independent_access_ranges sub-directory and contains the start sector and number of sectors of each range, with the information for each range grouped in numbered sub-directories. E.g. for a dual actuator HDD, the user sees: $ tree /sys/block/sdk/queue/independent_access_ranges/ /sys/block/sdk/queue/independent_access_ranges/ |-- 0 | |-- nr_sectors | `-- sector `-- 1 |-- nr_sectors `-- sector For a regular device with a single access range, the independent_access_ranges sysfs directory does not exist. Device revalidation may lead to changes to this structure and to the attribute values. When manipulated, the queue sysfs_lock and sysfs_dir_lock mutexes are held for atomicity, similarly to how the blk-mq and elevator sysfs queue sub-directories are protected. The code related to the management of independent access ranges is added in the new file block/blk-ia-ranges.c. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Link: https://lore.kernel.org/r/20211027022223.183838-2-damien.lemoal@wdc.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-27 02:22:19 +00:00
*/
disk_unregister_independent_access_ranges(disk);
disk->ia_ranges = iars;
if (blk_queue_registered(q))
disk_register_independent_access_ranges(disk);
block: Add independent access ranges support The Concurrent Positioning Ranges VPD page (for SCSI) and data log page (for ATA) contain parameters describing the set of contiguous LBAs that can be served independently by a single LUN multi-actuator hard-disk. Similarly, a logically defined block device composed of multiple disks can in some cases execute requests directed at different sector ranges in parallel. A dm-linear device aggregating 2 block devices together is an example. This patch implements support for exposing a block device independent access ranges to the user through sysfs to allow optimizing device accesses to increase performance. To describe the set of independent sector ranges of a device (actuators of a multi-actuator HDDs or table entries of a dm-linear device), The type struct blk_independent_access_ranges is introduced. This structure describes the sector ranges using an array of struct blk_independent_access_range structures. This range structure defines the start sector and number of sectors of the access range. The ranges in the array cannot overlap and must contain all sectors within the device capacity. The function disk_set_independent_access_ranges() allows a device driver to signal to the block layer that a device has multiple independent access ranges. In this case, a struct blk_independent_access_ranges is attached to the device request queue by the function disk_set_independent_access_ranges(). The function disk_alloc_independent_access_ranges() is provided for drivers to allocate this structure. struct blk_independent_access_ranges contains kobjects (struct kobject) to expose to the user through sysfs the set of independent access ranges supported by a device. When the device is initialized, sysfs registration of the ranges information is done from blk_register_queue() using the block layer internal function disk_register_independent_access_ranges(). If a driver calls disk_set_independent_access_ranges() for a registered queue, e.g. when a device is revalidated, disk_set_independent_access_ranges() will execute disk_register_independent_access_ranges() to update the sysfs attribute files. The sysfs file structure created starts from the independent_access_ranges sub-directory and contains the start sector and number of sectors of each range, with the information for each range grouped in numbered sub-directories. E.g. for a dual actuator HDD, the user sees: $ tree /sys/block/sdk/queue/independent_access_ranges/ /sys/block/sdk/queue/independent_access_ranges/ |-- 0 | |-- nr_sectors | `-- sector `-- 1 |-- nr_sectors `-- sector For a regular device with a single access range, the independent_access_ranges sysfs directory does not exist. Device revalidation may lead to changes to this structure and to the attribute values. When manipulated, the queue sysfs_lock and sysfs_dir_lock mutexes are held for atomicity, similarly to how the blk-mq and elevator sysfs queue sub-directories are protected. The code related to the management of independent access ranges is added in the new file block/blk-ia-ranges.c. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Link: https://lore.kernel.org/r/20211027022223.183838-2-damien.lemoal@wdc.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-27 02:22:19 +00:00
unlock:
mutex_unlock(&q->sysfs_lock);
mutex_unlock(&q->sysfs_dir_lock);
}
EXPORT_SYMBOL_GPL(disk_set_independent_access_ranges);